At present tests are quite slow to run, over a minute on my machine. This
presents a considerable barrier to bisecting for failures.
The slowest tests are the filesystem ones and the buildman --fetch-arch
test. Add a new 'qcheck' target that skips these tests. This reduces test
time down to about 40 second, still too long, but bearable.
Signed-off-by: Simon Glass <sjg@chromium.org>
There is some basic informaton that SPL normally wants to pass through to
U-Boot, such as the SDRAM size and bank information.
Mkae use of the new bloblist structure for this. Add a new 'handoff' blob
which is set up in SPL and passed to U-Boot proper. Also adda test for
sandbox_spl that checks that this works correctly and a new 'sb' command
to show the information passed from SPL.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
The old 'sb' command was deprecated in 2015 and replaced with 'host'.
Remove the remaining users and the command, so that the name is available
for other purposes.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we don't have a test that of-platdata can be accessed in SPL.
Add this in as a command-line option to SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is sometimes useful to restart sandbox with some particular flags to
test certain functionality. Add a new method to ConsoleSandbox to handle
this, without changing the existing APIs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
We should use a macro rather than hard-coding the SPL prompt to 'spl'
since the code can be used by TPL too. Add a macro that works for both
and use it in various places.
This allows TPL to use the same code without printing confusing messages.
Note that the string is lower case ('spl', 'tpl') which is a change from
previously.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
With drivers that have prefix names that are quite long (like
'versatile_') it is useful to have a wider column for the driver's
name when dumping the device driver tree.
Also update the tests to take into account the wider output format.
Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add pinmux test which test the following commands:
- pinmux list
- pinmux dev
- pinmux status
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Mark some tests as sandbox-centric]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
At present to output a log message you need something like:
log(UCLASS_SPI, LOCL_INFO, "message1");
log(UCLASS_SPI, LOCL_INFO, "message2");
but many files use the same category throughout. Also it is helpful to
shorten the length of log names, providing helpers for common logging
levels. Add some macros so that it is possible to do:
(top of file, before #includes)
#define LOG_CATEGORY UCLASS_SPI
(later in the file)
log_info("message1");
log_debug("message2");
log_err("message3");
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the tests run one after the other using a single CPU. This is
not very efficient. Bring in the concurrencytest module and run the tests
concurrently, using one process for each CPU by default. A -P option
allows this to be overridden, which is necessary for code-coverage to
function correctly.
This requires fixing a few tests which are currently not fully
independent.
At some point we might consider doing this across all pytests in U-Boot.
There is a pytest version that supports specifying the number of processes
to use, but it did not work for me.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the unicode filtering seems to get confused at times with
this error:
UnicodeDecodeError: 'ascii' codec can't decode byte 0x80 in position
32: ordinal not in range(128)
It seems to be due to self._nonprint being interpreted as UTF-8. Fix it
by using ordinals instead of characters, changing the string to set.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Update the pymark.buildconfigspec to depend on 'cmd_mmc' in addition to
'cmd_avb' for those tests that needs more a more complete MMC
implementation or the "mmc" command.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
After Siomon's comment, add a descriptive comment (docstring) to each of
helper functions in conftest.py. No functionality changed.
Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Since there is no use of fs_type in umount_fs(), just remove it.
Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
After a test has failed, test/py drains the U-Boot console log to ensure
that any relevant output is captured. At this point, we don't care about
detecting any additional errors, since the test is already known to have
failed, and U-Boot will be restarted. To ensure that the test cleanup code
is not interrupted, and can correctly terminate the log sections for the
failed test, ignore any exception that occurs while reading the U-Boot
console output during this limited period of time.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Use a key notification function to leave the
EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a unit test for the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Test that the Euro sign is correctly retrieved from the console via the
EFI_SIMPLE_TEXT_INPUT_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
In this commit, test cases for unlink interfaces are added as part of
"test_fs" test suite.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
In this commit, test cases for mkdir interfaces are added as part of
"test_fs" test suite.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
In this commit and the following, test scripts for new filesystem
functionalities introduced by my patch set, "fs: fat: extend FAT write
operations," are provided.
In particular, this patch adds test cases for sub-directory write
and write with non-zero offset.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
In this commit, the same set of test cases as in test/fs/fs-test.sh
is provided using pytest framework.
Actually, fs-test.sh provides three variants:"sb" (sb command), "nonfs"
(fatxx and etc.) and "fs" (hostfs), and this patch currently supports
only "nonfs" variant; So it is not a replacement of fs-test.sh for now.
Simple usage:
$ py.test test/py/tests/test_fs [<other options>]
You may also specify filesystem types to be tested:
$ py.test test/py/tests/test_fs --fs-type fat32 [<other options>]
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Execute the EFI selftest for the EFI_SIMPLE_TEXT_INPUT_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for info, load, loadp, loadb, loadbp, loadmk_legacy,
loadmk_legacy_gz, loadmk_fit, loadfs also with variable support.
There are probably missing failed tests.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In some cases it can be useful to be able to bind a device to a driver from
the command line.
The obvious example is for versatile devices such as USB gadget.
Another use case is when the devices are not yet ready at startup and
require some setup before the drivers are bound (ex: FPGA which bitsream is
fetched from a mass storage or ethernet)
usage example:
bind usb_dev_generic 0 usb_ether
unbind usb_dev_generic 0 usb_ether
or
unbind eth 1
bind /ocp/omap_dwc3@48380000/usb@48390000 usb_ether
unbind /ocp/omap_dwc3@48380000/usb@48390000
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
While using the 'tpm' command should work on most cases, this test suite
only works with TPMv2 and since the work to make both versions build at
the same time, we might end up having both 'tpm' (TPMv1) and 'tpm2'
(TPMv2) commands available at the same time. Ensure this test suite
always use the right one.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This tests that the importing of an environment with a specified
whitelist works as intended.
If there are variables passed as parameter to the env import command,
those only should be imported in the current environment.
For each variable passed as parameter, if
- foo is bar in current env and bar2 in exported env, after importing
exported env, foo shall be bar2,
- foo does not exist in current env and foo is bar2 in exported env,
after importing exported env, foo shall be bar2,
- foo is bar in current env and does not exist in exported env (but is
passed as parameter), after importing exported env, foo shall be empty
ONLY if the -d option is passed to env import, otherwise foo shall be
bar,
Any variable not passed as parameter should be left untouched.
Two other tests are made to test that size cannot be '-' if the checksum
protection is enabled.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Some functions have different behaviour when the given address is 0
(assumed to be NULL by the function).
find_ram_base() does not return 0 anymore so it's safe to remove those
offsets.
Suggested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Some functions test that the given address is not NULL (0) and fail or
have a different behaviour if that's the case (e.g. hexport_r).
Let's make the RAM base address to be not zero by setting it to 2MiB if
that's the case.
2MiB is chosen because it represents the size of an ARM LPAE/v8 section.
Suggested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
This adds a new config value FIT_SIGNATURE_MAX_SIZE, which controls the
max size of a FIT header's totalsize field. The field is checked before
signature checks are applied to protect from reading past the intended
FIT regions.
This field is not part of the vboot signature so it should be sanity
checked. If the field is corrupted then the structure or string region
reads may have unintended behavior, such as reading from device memory.
A default value of 256MB is set and intended to support most max storage
sizes.
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Teddy Reed <teddy.reed@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The openssl command specified in test_with_algo() ultimately ends up
being run by RunAndLog::run(), which uses it to construct a Popen object
with the default shell=False. The stderr redirect in the command is
therefore simply passed to openssl as an argument. With at least openssl
1.1.0f this causes openssl, and therefore test_vboot, to fail with:
genpkey: Use -help for summary.
Exit code: 1
Any stderr output ought to be captured & stored in the RunAndLog
object's output field and returned from run() via run_and_log() to
test_with_algo() which then ignores it anyway, so we can drop the
shell-like redirection with no ill effects. With this fix test_vboot now
passes for me.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
In python 3.x the file() function has been removed. Use open() instead,
which works on both python 2.x & 3.x, and is described as the preferred
method of opening a file by python 2.x documentation anyway.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
The read_file() function in test_fit is used with files that are not
text files, as well as some that are. It is never used in a way that
requires it to decode text files to characters, so open all files in
binary mode such that read() doesn't attempt to decode characters for
files which are not text files.
Without this test_fit fails on python 3.x when reading an FDT in
run_fit_test() with:
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in position
0: invalid continuation byte
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
In python 3.x the configparser module is named with all lower case.
Import it as such in order to avoid errors when running on python 3.x,
and fall back to the CamelCase version in order to keep working with
python 2.x.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
In python 3.x the xrange() function has been removed, and range()
returns an iterator much like Python 2.x's xrange(). Simply use range()
in place of xrange() in order to work on both python 2.x & 3.x. This
will mean a small cost on python 2.x since range() will return a list
there rather than an iterator, but the cost should be negligible.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
In python 3.x print must be called as a function rather than used as a
statement. Update uses of print to the function call syntax in order to
be python 3.x safe.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
1. Run AVB 2.0 full verification chain, avb verify
2. Check if 'avb get_uuid' works, compare results with
'part list mmc 1' output
3. Test `avb read` commands, which reads N bytes from a partition
identified by a name
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
While the tests in this testcase are for the log subsystem they are only
able to be run if CONFIG_CMD_LOG is enabled as well as CONFIG_LOG, so
update the buildconfigspec requirement.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add tests for the TPMv2.x commands.
These commands may run both on a physical TPM and with the sandbox
driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
The unit test checks if a device tree is installed. It requires that the
'compatible' property of the root node exists. If available it prints the
'serial-number' property.
The serial-number property is derived from the environment variable
'serial#'. This can be used to check if the image_setup_libfdt() function
is executed.
A Python test is supplied. It sets a value for serial# and checks that the
selftest shows this as serial-number.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a generic function which can be used to compute the CRC32 value of
a region of RAM.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
As opposed to PATH, HOSTNAME is not appended to PYTHONPATH
automatically. Lets add it to the examples to make it more
obvious to new users.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Fix a minor typo causing vim (and possibly other) to get confused with
coloring.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
