Some boot methods don't act on a single bootdev but instead do their own
thing. An example is EFI bootmgr which scan various devices using its own
logic. Add a bootdev to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a bootmeth driver which handles EFI boot, using EFI_LOADER.
In effect, this provides the same functionality as the 'bootefi' command
and shares the same code. But the interface into it is via a bootmeth,
so it does not require any special scripts, etc.
For now this requires the 'bootefi' command be enabled. Future work may
tidy this up so that it can be used without CONFIG_CMDLINE being enabled.
There was much discussion about whether this is needed, but it seems
that it is, at least for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a bootmeth driver which handles distro boot from a network device, so
we can boot a bootflow using this commonly used mechanism.
In effect, this provides the same functionality as the 'pxe' command
and shares the same code. But the interface into it is via a bootmeth.
For now this requires the 'pxe' command be enabled. Future work may tidy
this up so that it can be used without CONFIG_CMDLINE being enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a bootdev driver for MMC. It mostly just calls the bootdev helper
function.
Add a function to obtain the block device for an MMC controller.
Fix up the comment for mmc_get_blk_desc() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a bootmeth driver which handles distro boot from a disk, so we can
boot a bootflow using this commonly used mechanism.
In effect, this provides the same functionality as the 'sysboot' command
and shares the same code. But the interface into it is via a bootmeth.
For now this requires the 'pxe' command be enabled. Future work may tidy
this up so that it can be used without CONFIG_CMDLINE being enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a 'bootdev' command to handle listing and selection of bootdevs.
Disable standard boot for a few boards which otherwise run out of space.
Signed-off-by: Simon Glass <sjg@chromium.org>
A bootmeth is a method of locating an operating system. For now, just
add the uclass itself. Drivers for particular bootmeths are added later.
If no bootmeths devices are included in the devicetree, create them
automatically. This avoids the need for boilerplate in the devicetree
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
A 'bootdev' is a device which can be used to boot an operating system.
It is a child of the media device (e.g. MMC) which handles reading files
from that device, such as a bootflow file.
Add a uclass for bootdev and the various helpers needed to make it
work. Also add a binding file, empty for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
The 'bootstd' device provides the central information about U-Boot
standard boot.
Add a uclass for bootstd and the various helpers needed to make it
work. Also add a binding file.
Signed-off-by: Simon Glass <sjg@chromium.org>
A bootflow encapsulates the process used to boot an operating system.
It typically has a control file (such as extlinux.conf) and information
about which 'bootdev' it came from.
Add the header file for this first, since it is needed by all other
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
When sandbox is used with hostfs we won't have a block device, but still
must set up the filesystem type before any filesystem operation, such as
loading a file. Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bootflow tests need to use an MMC with an associated backing file
containing a filesystem. Update the fastboot tests to cope with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
In some cases two devices are related and the only way to tell is to
check that the names partially patch. Add a way to check this without
needing to create a new string for the comparison.
Fix the comment for device_find_child_by_namelen() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
It seems that namelen is more common in U-Boot. Rename this function to
fit in better. Also fix a bug where it breaks the operation of
uclass_get_by_name() and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reported-by: Tim Harvey <tharvey@gateworks.com>
At present it is not possible to find out which part of the string is the
number part and which is before it. Add a new variant which provides this
feature, so we can separate the two in the caller.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this has a minor bug in that it reads the byte before the
start of the string, if it is empty. Also it doesn't handle a
non-numeric prefix which is only one character long.
Fix these bugs with a reworked implementation. Add a test for the second
case. The first one is hard to test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tweak a few comments to kep sphinx happy, in case we want to include this
file one day.
Also fix the 'exxamine' typo.
Patch-notes:
This uses:
sed -i 's/@param \(\S*\)\s*/@\1: /' include/vsprintf.h
to convert the @param to the new format.
Signed-off-by: Simon Glass <sjg@chromium.org>
Prepare to use ADC channel 1 to check the hardware revision of the board:
- add u-boot dts include with saradc node
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220424082159.757622-6-adeep@lexina.in
Add support for the SARADC variant found on the AXG SoCs family.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220424082159.757622-5-adeep@lexina.in
Update the clk-g12a-ao driver from "axg" to "g12a"
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220424082159.757622-3-adeep@lexina.in
Add minimal driver AO clocks on meson AXG family. Only ADC related clocks
are supported.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220424082159.757622-2-adeep@lexina.in
There is a Kconfig for this erratum, but it is ignored for armv8.
Respect it.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
On Layerscape platforms, the DTB is loaded from boot filesystem,
per the fdt_addr description in doc/README.distro, it must be
removed.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
This is a follow-up patch for my "disk: don't compile in partition
support for spl/tpl if not really necessary".
"part" command is useful only if, at least, one of partition table types
is selected. So it should have a dependency on PARTITIONS which is now
automatically selected if one of partition table types is enabled.
With this change, *_defconfig which explicitly selects CMD_PART but
has no partition table types enabled should also be fixed.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Documentation:
* Document image size parameter of bootefi command
UEFI:
* avoid building partition support in SPL/TPL where not required
* improve integration of EFI subsystem and driver model
* restore ability to boot arbitrary blob
-----BEGIN PGP SIGNATURE-----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=a5qc
-----END PGP SIGNATURE-----
Merge tag 'efi-2022-07-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-07-rc1-3
Documentation:
* Document image size parameter of bootefi command
UEFI:
* avoid building partition support in SPL/TPL where not required
* improve integration of EFI subsystem and driver model
* restore ability to boot arbitrary blob
In most of all cases, we can avoid using blk_desc which is expected
to be private to udevice(UCLASS_BLK), that is, the data should not
be manipulated outside the device driver unless really needed.
Now efi_disk's internally use dev_read/write() interfaces
if CONFIG_PARTITIONS is enabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
In include/blk.h, Simon suggested:
===>
/*
* These functions should take struct udevice instead of struct blk_desc,
* but this is convenient for migration to driver model. Add a 'd' prefix
* to the function operations, so that blk_read(), etc. can be reserved for
* functions with the correct arguments.
*/
unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, void *buffer);
unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *buffer);
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt);
<===
So new interfaces are provided with this patch.
They are expected to be used everywhere in U-Boot at the end.
The exceptions are block device drivers, partition drivers and efi_disk
which should know details of blk_desc structure.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
When we create an efi_disk device with an UEFI application using driver
binding protocol, the 'efi_driver' framework tries to create
a corresponding block device(UCLASS_BLK/IF_TYPE_EFI). This will lead to
calling a PROBE callback, efi_disk_probe().
In this case, however, we don't need to create another "efi_disk" device
as we already have this device instance.
So we should avoid recursively invoke further processing in the callback
function.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This function is expected to be called, in particular from dm's pre_remove
hook, when associated block devices no longer exist.
Add efi_disk_remove() function.
This function removes an efi_disk object for a raw disk device (UCLASS_BLK)
and related objects for its partitions (UCLASS_PARTITION).
So this function is expected to be called through driver model's "remove"
interface every time a raw disk device is to be disconnected.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When we create an efi_disk device with an UEFI application using driver
binding protocol, the 'efi_driver' framework tries to create
a corresponding block device(UCLASS_BLK/IF_TYPE_EFI). This will lead to
calling a PROBE callback, efi_disk_probe().
In this case, however, we don't need to create another "efi_disk" device
as we already have this device instance.
So we should avoid recursively invoke further processing in the callback
function.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add efi_disk_probe() function.
This function creates an efi_disk object for a raw disk device (UCLASS_BLK)
and additional objects for related partitions (UCLASS_PARTITION).
So this function is expected to be called through driver model's "probe"
interface every time one raw disk device is detected and activated.
We assume that partition devices (UCLASS_PARTITION) have been created
when this function is invoked.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In the next commit, CONFIG_EFI_SETUP_EARLY will become mandated
in order to support dynamic enumeration of efi_disk objects.
This can, however, be problematic particularly in case of file-based
variable storage (efi_variable.c, default).
Non-volatile variables are to be restored from EFI system partition
by efi_init_variables() in efi_init_obj_list(). When efi_init_obj_list()
is called in board_init_r(), we don't know yet what disk devices
we have since none of device probing commands (say, scsi rescan) has not
been executed at that stage.
So in this commit, a preparatory change is made; efi_init_obj_list() is
broken into the two functions;
* efi_init_early(), and
* new efi_init_obj_list()
Only efi_init_early() will be called in board_init_r(), which allows
us to execute any of device probing commands, either though "preboot"
variable or normal command line, before calling efi_init_obj_list() which
is to be invoked at the first execution of an efi-related command
(or at efi_launch_capsules()) as used to be.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Now that all the block device drivers have enable a probe hook, we will
call part_create_block_devices() to enumerate all the partitions and
create associated udevices when a block device is detected.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
NOTE: probably we have to update config dependencies,
in particular, SPL/TPL_PRINTF?
With this new function, UCLASS_PARTITION devices will be created as
child nodes of UCLASS_BLK device.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
The new test covers all tag-related interfaces.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some basic stuff about tag support is explained under
doc/devlop/driver-model.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
ENOMEM is a more common error code for memory starvation.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
U-Boot menu framework(common/menu.c) returns 1 if it is successful,
returns negative value if it fails.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Under the current Kconfigs, disk/part.c will be compiled in even if none of
partition table types are enabled. This will lead to the size growth of SPL
/TPL code.
With this patch, CONFIG_PARTITIONS is selected only if, at least, one of
CONFIG_*_PARTITION is enabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Now we can build efi_loader with block device support (CONFIG_BLK) and
without CONFIG_PARTITIONS.
So change Makefile.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
