Commit graph

54797 commits

Author SHA1 Message Date
Horatiu Vultur
d1182056d3 MSCC: Add device tree for Jaguar2 board
Add device tree based on evaluation board pcb110.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
e7a0de2c31 MSCC: Add support for Jaguar2 SOC family
As the Ocelot and Luton SoCs, this family of SoCs are found
in Microsemi Switches solution.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
051de9b3eb pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common
to support new numbe of pins and remove any platform dependency from
mscc-common.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
ace9c103df mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.c
With the new mscc_bb_spi.c driver, there is no longer use for the
gpio-mscc-bitbang-spi.c driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
6492c9168a mips: mscc: DT: Update luton device tree to use fast SPI driver
Thes patch change the luton base device tree to use the newly added
SPI bitbang driver.

It also updates the "mscc_luton_defconfig" to use the new driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
fd6e0b0525 mips: spi: mscc: Add fast bitbang SPI driver
This patch add a new SPI driver for MSCC SOCs that does not sport the
designware SPI hardware controller.

Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Ezequiel Garcia
82d5464788 mmc: jz_mmc: Compile-out write support if disabled
Do not build write support, unless it's enabled.

In the SPL case, this change will typically remove
precious bytes (as write support is most often
not needed in SPL).

This is important on this platform, where the maximum
SPL size is 14 KiB.

With gcc v7.3, this change saves 144 bytes producing:

size spl/u-boot-spl
   text	   data	    bss	    dec	    hex	filename
   9240	    752	    712	  10704	   29d0	spl/u-boot-spl

To make the code easier to compile-out and more
readable, a pair of read_data/write_data helpers are created.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Ezequiel Garcia
2a4bb3d271 mmc: Use proper IS_ENABLED macro to check block support
Use CONFIG_IS_ENABLED(BLK) instead of CONFIG_BLK,
in order to fix the following build issues when
CONFIG_SPL_MMC_WRITE is selected:

drivers/mmc/mmc_write.c:69:7: error: conflicting types for 'mmc_berase'
 ulong mmc_berase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt)
       ^~~~~~~~~~
In file included from drivers/mmc/mmc_write.c:15:0:
drivers/mmc/mmc_private.h:39:7: note: previous declaration of 'mmc_berase' was here
 ulong mmc_berase(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt);
       ^~~~~~~~~~
drivers/mmc/mmc_write.c:187:7: error: conflicting types for 'mmc_bwrite'
 ulong mmc_bwrite(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
       ^~~~~~~~~~
In file included from drivers/mmc/mmc_write.c:15:0:
drivers/mmc/mmc_private.h:37:7: note: previous declaration of 'mmc_bwrite' was here
 ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
       ^~~~~~~~~~

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Álvaro Fernández Rojas
a4ae422570 net: bcm6368: fix restart flow issues
Correctly enable/disable bcm6368-net controller to avoid flow issues.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Daniel Schwierzeck
b8e7e5d8c5 MIPS: jz47xx: remove custom u-boot-spl.lds
There is no real difference between the generic variant and
the custom variant except that the generic variant is more
optimised. This also saves 24 Bytes in the SPL binary.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-01-16 13:56:43 +01:00
Daniel Schwierzeck
2fdadc0f82 MIPS: optimize and fix ELF sections
Discard ABI related sections which are not required for debugging.
Rearrange debug sections similar to Linux. Remove the remaining
explicitely specified sections in the unused part because those
sections are not created anymore or because the linker puts them
by default at the end of the ELF binary.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
4deb09632d mips: ocelot: Enable use of serial gpio for LED
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
26ad3c43a7 mips: ocelot: DT: Enable use of serial gpio
This enables the use of the MSCC serial GPIO driver on the MSCC
VCoreIII 'ocelot' SOC, and add gpio-leds nodes to the pcb123 and
pcb120 DT.

Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
711f2dc08d mips: luton: Enable use of serial gpio for LED
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'luton' SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
738f2b148d mips: luton: DT: Enable use of serial gpio
This enables the use of the MSCC serial GPIO driver, and add gpio-leds
nodes to the 'luton' pcb090 and pcb091 DT.

Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
2a48c15d2e mips: mscc_sgpio: Add DT bindings documentation
This add device tree binding documentation for the MSCC serial GPIO
driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-16 13:56:43 +01:00
Lars Povlsen
be8313feee mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
This add support for the the MSCC serial GPIO driver in MSCC
VCoreIII-based SOCs.

By using a serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of additional pins
on the device. The primary purpose of the SIO controller is to connect
control signals from SFP modules and to act as an LED controller.

This adds the base driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
e9f1492bca mips: mscc: luton+ocelot: Remove board config options, do probing
As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
e39c6783d3 mips: luton: DT: Add pcb090
This prepares individual device trees for MSCC luton-based reference
boards - pcb090 and pcb091.

Note: Even though the devices trees are quite common, they will differ
significantly in coming patches.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
e58031acdc mips: mscc: Add generic GPIO control utility function
The GPIO control function can be used for controlling alternate
functions associated with a GPIO.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
3098ade229 mips: mscc: Add generic PHY MIIM utility functions
The PHY MIIM utility functions can/will be used for board detection
purposes.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Tom Rini
aac0c29d4b Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
 Small fixes to 'dm tree' and regmap test
 Improve sandbox build compatibility
 A few other minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlw+AlIACgkQfxc6PpAI
 reYchAf+L/P5JsLoCKAY84v11eWQkCS44idAYStD8Q023dyuyNC/W6G3qEQVGkHu
 SXBzNrZ5wSJanN5I3h3ktJ7yfMOYIvSO2qLHphxDstPaZbCY4Zac6NywHrHxQpA9
 fbSilQRbcVWrPo5rsjjZhXmMdQRZVOmGD6CYZj1AihWAiHfYth7f6laNWNTWQA8C
 z+aoiF70t/PbvwFbgdzzYOjoGdXI9XML0xTqdLWRlsBKjf3z54pCV6LmN2xrsrDZ
 k7lr+x7ajJUFhivxzjowf4aOjhDB+/+I3sr+hJ5vkMM0Kqg14bbEU+xJRGpDc18K
 QPvVHT5JGe/nq1cZXuCqzrYxTrrA7A==
 =w9ln
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dm

Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
Small fixes to 'dm tree' and regmap test
Improve sandbox build compatibility
A few other minor fixes
2019-01-15 22:05:34 -05:00
Tom Rini
f4cfd73943 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2019-01-15 22:05:28 -05:00
Tom Rini
0cd35f3920 Merge git://git.denx.de/u-boot-riscv
1. Improve cache implementation.
2. Fix and improve standalone applications
2019-01-15 22:05:05 -05:00
Tom Rini
e807f6b5f9 Merge branch '2019-01-14-master-imports'
- MediaTek improvements (eth support)
- DM conversion for HI6220
- ISEE, Toby Churchill, other platform updates
- Various format code printf fixes
- Build race fixes
- Command repeat functionality enhanced, command autocomplete support
  enhanced.
2019-01-15 20:33:07 -05:00
Boris Brezillon
03dcf17dba common: command: Add support for $ auto-completion
Add the dollar_complete() function to auto-complete arguments starting
with a '$' and use it in the cmd_auto_complete() path such that all
args starting with a $ can be auto-completed based on the available env
vars.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[trini: Fix some linking problems]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:38:28 -05:00
Tien Fong Chee
31a2cf1ca4 misc: fs_loader: Switching private data allocation to DM auto allocation
Switching private data manual allocation to driver model auto allocation
so users no longer need to deallocate themself because this would be
deallocated by driver model when the device is no longer required.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:54 -05:00
Boris Brezillon
9652cfd9ee cmd: adc: Use the sub-command infrastructure
And you get sub-command auto-completion for free.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
9671243e8d cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands
It's way simpler this way, and we also gain auto-completion support for
free (MTD name auto-completion has been added with mtd_name_complete())

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
c0cf06e523 command: commands: Add macros to declare commands with subcmds
Most cmd/xxx.c source files expose several commands through a single
entry point. Some of them are doing the sub-command parsing manually in
their do_<cmd>() function, others are declaring a table of sub-commands
and then use find_cmd_tbl() to delegate the request to the sub command
handler.

In either case, the amount of code to do that is not negligible and
repetitive, not to mention that almost no commands are implementing
the auto-completion hook, which means most u-boot commands lack
auto-completion.

Provide several macros to easily define commands exposing sub-commands.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
80a48dd47e common: command: Rework the 'cmd is repeatable' logic
The repeatable property is currently attached to the main command and
sub-commands have no way to change the repeatable value (the
->repeatable field in sub-command entries is ignored).

Replace the ->repeatable field by an extended ->cmd() hook (called
->cmd_rep()) which takes a new int pointer to store the repeatable cap
of the command being executed.

With this trick, we can let sub-commands decide whether they are
repeatable or not.

We also patch mmc and dtimg who are testing the ->repeatable field
directly (they now use cmd_is_repeatable() instead), and fix the help
entry manually since it doesn't use the U_BOOT_CMD() macro.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
6fb61445bb common: command: Expose a generic helper to auto-complete sub commands
Some commands have a table of sub-commands. With minor adjustments,
complete_cmdv() is able to provide auto-completion for sub-commands
(it's just about passing the table of commands instead of taking the
global one).
We rename this function into complete_subcmd() and implement
complete_cmdv() as a wrapper around complete_subcmdv().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:53 -05:00
Boris Brezillon
cbe07ebeaf common: command: Fix command auto-completion
When auto-completing command arguments, the last argument is not
necessarily the one we need to auto-complete. When the last character is
a space, a tab or '\0' what we want instead is list all possible values,
or if there's only one possible value, place this value on the command
line instead of trying to suffix the last valid argument with missing
chars.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:53 -05:00
Marek Vasut
2e89bbefdc blk: Increase cache element size
Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
the underlying block layer devices usually report support for 512B . In
most cases, the 512B support is emulated (ie. SD cards, SSDs, USB sticks
etc.) and the real block size of those devices is much bigger.

To avoid performance degradation with such devices and FS setup, bump
the maximum cache entry size to 4 kiB.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:53 -05:00
Simon Goldschmidt
45297e2ab2 Makefile: run CONFIG_BOARD_SIZE_LIMIT against .img
With the current Makefile, CONFIG_BOARD_SIZE_LIMIT is used to check
the U-Boot binary without devicetree only. This produces wrong results
when OF_SEPARATE is used.

To fix this, run the CONFIG_BOARD_SIZE_LIMIT check on all .img binaries
as well.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:53 -05:00
Masahiro Yamada
c16b137e49 kbuild: add .SECONDARY special target to scripts/Kbuild.include
Based on the following Linux commits:

 - 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and remove
   .PRECIOUS markers")

 - 8e9b61b293d9 ("kbuild: move .SECONDARY special target to
   Kbuild.include")

GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.

Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped

A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.

  .SECONDARY
    Prerequisites of this special target are treated as intermediate
    files but are never automatically deleted.

  .PRECIOUS
    When make is interrupted during execution, it may delete the target
    file it is updating if the file was modified since make started.
    If you mark the file as precious, make will never delete the file
    if interrupted.

Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.

The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.

.SECONDARY with no prerequisites causes all targets to be treated as
secondary. This agrees the policy of Kbuild.

scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-15 15:28:53 -05:00
Masahiro Yamada
368a0dfbf8 kbuild: add .DELETE_ON_ERROR special target
Linux commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0

If Make gets a fatal signal while a shell is executing, it may delete
the target file that the recipe was supposed to update.  This is needed
to make sure that it is remade from scratch when Make is next run; if
Make is interrupted after the recipe has begun to write the target file,
it results in an incomplete file whose time stamp is newer than that
of the prerequisites files.  Make automatically deletes the incomplete
file on interrupt unless the target is marked .PRECIOUS.

The situation is just the same as when the shell fails for some reasons.
Usually when a recipe line fails, if it has changed the target file at
all, the file is corrupted, or at least it is not completely updated.
Yet the file’s time stamp says that it is now up to date, so the next
time Make runs, it will not try to update that file.

However, Make does not cater to delete the incomplete target file in
this case.  We need to add .DELETE_ON_ERROR somewhere in the Makefile
to request it.

scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-15 15:28:52 -05:00
Chris Packham
f75977303d common: Kconfig: miscellaneous spelling fixes
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:52 -05:00
Masahiro Yamada
0b588deffe kbuild: fix parallel build race caused by u-boot.cfg regeneration
Multiple people have reported intermittent build failure in parallel
building.

Kever Yang reported this issue some time ago [1], but I could not
get enough clue at that time.

This time, Richard Purdie provided a full build log [2], which was
very helpful for me to root-cause it.

The cause of the problem is commit 0d982c5853 ("Makefile: add
dependencies to regenerate u-boot.cfg when lost").

That commit added the 'cfg' as the prerequisite of the 'all' target,
so the parallel build tries to run it simultaneously, then regenerates
a symlink while building objects.

When u-boot.cfg is accidentally lost, let's rebuild it before
descending into any subdirectories.

Also, what is annoying is u-boot.cfg is currently regenerated every
time since it depends on FORCE. We can get rid of all the prerequisites
of u-boot.cfg because u-boot.cfg is rebuilt anyway as the byproduct of
auto.conf when a user updates the .config file.

[1] https://lists.denx.de/pipermail/u-boot/2018-June/330341.html
[2] https://autobuilder.yoctoproject.org/typhoon/#/builders/65/builds/160/steps/7/logs/step1b

Fixes: 0d982c5853 ("Makefile: add dependencies to regenerate u-boot.cfg when lost")
Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:52 -05:00
Simon Goldschmidt
c4448bdc4f serial: ns16550: fix debug uart putc called before init
If _debug_uart_putc() is called before _debug_uart_init(), the
ns16550 debug uart driver hangs in a tight loop waiting for the
tx FIFO to get empty.

As this can happen via a printf sneaking in before the port calls
debug_uart_init(), introduce a config option to ignore characters
before the debug uart is initialized.

This is done by reading the baudrate divisor and aborting if is zero.

The Kconfig option is required as reading the baudrate divisor does
not seem to work for all ns16500 compatibles (which is why the last
attempt on this has been reverted in 1a67969a99).

Tested on socfpga_cyclone5_socrates.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:52 -05:00
Simon Goldschmidt
7828e3cf70 drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UART
DEBUG_UART_SKIP_INIT is used only by debug UART and thus should depend
on DEBUG_UART.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:52 -05:00
Vagrant Cascadian
bb5835bc01 Fix typo: missmatched -> mismatched.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-15 15:28:51 -05:00
Lokesh Vutla
a4773c5559 xyz-modem: Fix timeout loop waiting with WATCHDOG
Commit 2c77c0d652 ("xyz-modem: Change getc timeout loop waiting")
fixes the loop delay when using a hw watchdog, assuming that watchdog
kicking is taken care of by getc(). But the xyzmodem driver tries to
do a getc only after confirming that a character is available like below:
	while (!tstc()) {
		till timeout;
	}
	if (tstc())
		*c = getc();

and getc() does a watchdog reset only if it fails to see a character.
In this case, getc() always sees a character and never does a
watchdog reset. So to make sure that watchdog doesn't get reset
while loading the file, do a watchdog reset just before starting the
image loading.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:51 -05:00
Josef Lusticky
03e6151d5b pylibfdt: Use Python 2 in Makefile
pylibfdt needs Python 2 to build.
Replace $(PYTHON) with $(PYTHON2) in pylibfdt Makefile
to ensure Python 2 is used to build it.

This fixes build on systems where Python 3 is the default version
of the "python" interpreter.
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:45 -05:00
Marek Vasut
05f6da3fac lib: uuid: Do not enable UUID command SPL
The uuid command is only really useful in U-Boot, but it's useless in
SPL. Worse yet, it pulls in various environment manipulation functions
as it call env_set(). Do not compile the command in in SPL.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:45 -05:00
Marek Vasut
92e5cb804a spl: ymodem: Add support for loading gzip compressed uImage
Add support for gunzip-ing gzip-compressed uImages in the SPL Ymodem code.
Loading data over Ymodem can be gruelingly slow, gzip-ing the data can
reduce that aggravating slowness at least slightly (depends on the data,
u-boot.bin compresses to ~1/3 of it's original size on ARM64), hence add
optional support for decompressing gzip-compressed uImages.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:45 -05:00
Simon Goldschmidt
7d05d3a8e3 dtoc: make generated platdata structs const
The platdata initialization structs are currently generated into .rwdata.
Make sure the are put into .rodata by generating them as const.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:45 -05:00
Heinrich Schuchardt
d667090999 cmd: zip: use correct format code
dst_len is defined as unsigned long. So use %lu for printf().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-15 15:28:44 -05:00
Heinrich Schuchardt
9ae2ddc82e cmd: unzip: use correct format code
src_len is defined as unsigned long. So use %lu for printf().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-15 15:28:44 -05:00
Heinrich Schuchardt
76428561b3 cmd: ubi: remove unreachable code
It does not make sense to check if argc < 2 a second time, especially after
accessing argv[1].

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-15 15:28:44 -05:00