Commit graph

66477 commits

Author SHA1 Message Date
Amit Singh Tomar
75523d54ac arm: dts: s700: add node for ethernet controller
This patch adds node for ethernet controller found on Action Semi OWL
S700 SoC.

Since, there is no upstream Linux binding exist for S700 ethernet
controller, Changes are put in u-boot specific dtsi file.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 17:12:01 -04:00
Amit Singh Tomar
3c5c4ee35f net: designware: s700: Add glue code for S700 mac
This patchs adds glue logic to enable designware mac present on
Action Semi based S700 SoC, Configures SoC specific bits.

Undocumented bit that programs the PHY interface select register
comes from vendor source.

It has been tested on Cubieboard7-lite based on S700 SoC.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 17:11:58 -04:00
Amit Singh Tomar
fa6539a3dc net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings
RTL8201F PHY module found on Actions Semi Cubieboard7 seems to have
specific Rx/Tx interface timings requirement for proper PHY operations.
These timing values are not documented anywhere and picked from vendor
code.

This commits lets proper packets to be transmitted over the network.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 16:09:22 -04:00
Amit Singh Tomar
b0778d9c2c net: phy: realtek: Add support for RTL8201F PHY module.
This patch adds support for Realtek PHY RTL8201F 10/100Mbs
(with variants: RTL8201FN and RTL8201FL) PHYceiver. It is
present on Actions Semi Cubieboard7 board.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 16:09:22 -04:00
Amit Singh Tomar
3a21734605 clk: actions: Add Ethernet clocks
This commit adds clocks needed for ethernet operations for
Actions OWL family of SoCs (S700 and S900).

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 16:09:22 -04:00
Amit Singh Tomar
0a7ba7c53c arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs
Now that, we calculate SDRAM size by reading DDR registers,
"CONFIG_SYS_SDRAM_SIZE" is no more needed.

This commit removes "CONFIG_SYS_SDRAM_SIZE" from common configuration
file.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-07-07 16:09:22 -04:00
Amit Singh Tomar
3ca564e96e Actions: OWL: Calculate SDRAM size
Calculate the SDRAM size from DDR capacity register registers instead
of using hard-coded value. This is quite useful to get correct size
on differnt boards based on Actions OWL family of SoCs (S700 and S900).

There is no documentation available that talks about DDR registers, and
this is very much taken from vendor source.

This commit lets Linux boot on Cubieboard7-lite(based on S700).

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-07-07 16:09:22 -04:00
Robert Marko
26073f9ed3 image: Add support for ZSTD decompression
This patch adds support for ZSTD decompression of FIT images.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-07-07 15:37:13 -04:00
Niel Fourie
e369790843 cmd: blkls: Add blkls command
Add a command to print a list of available block device drivers,
and for each, the list of known block devices.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-07 15:37:13 -04:00
Niel Fourie
2e48836895 cmd: dm: Fixed/Added DM driver listing subcommands
Renamed dm "drivers" subcommand to "compat" (as it listed
compatibility strings) and prevent it from segfaulting when
drivers have no of_match populated.

Added a new "drivers" subcommand to dump a list of all known DM
drivers and for each, their uclass id, uclass driver and names of
attached devices.

Added a new "static" subcommand to dump a list of DM drivers with
statically defined platform data.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-07 15:37:13 -04:00
Niel Fourie
2280fa56a0 cmd: fs: Add command to list supported fs types
Added command "fstypes" to list supported/included filesystems.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Limit to sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-07 15:36:59 -04:00
Niel Fourie
0ffdfbd1d0 cmd: part: Add subcommand to list supported partition tables
Add a subcommand "types" to the part command, which lists the supported
partition table types.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-07 15:22:42 -04:00
Tom Rini
1e88e78177 - arch and board update for stm32mp15:
- use OPP information in device tree for 800MHz/650MHz support
   - ram: inprovments of test command
   - solve boot on closed chip when access to DBGMCU_IDC is protected
   - stm32prog command: Add "device anme" during USB enumeration
   - update configs: activate WATCHDOG and 'env erase' command,
     increase teed partition, support SD card after NOR boot by default and
     use env info in env_check
   - some sboard cleanups: gpio hog in dh board, specific driver for
     type-c stusb1600 controller code in a driver move part of code in spl.c
     and in common directory
 - fix STM32 compatible for dwc_eth_qos driver
 - support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
   drivers
 - vrefbuf: fix a possible overshoot when re-enabling
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl8EgGEACgkQ4rK92eCq
 k3V7mwf+N5Iq6CbUPP11mFiNgAFZ5+hcn6gBTWvbjnd+oaIp15hiQrUNusGNFxXe
 oyM4fvm12tjuWFlA0U6VtiLhuVQB1Yte048oX+edDCCLGwxkp6cKBHtCaGT14XvY
 ow60XInv/dlrINumf8isy+5QlLgT1Cb7aGZN1qRHsUtnHB/IC836KO+hukGRUvk3
 Lqz+FbHqitKnL+CIboC2+YzXqG6ZXdixFZVVPmTVd34C8hQOdkExJ//uR/lH/s6f
 vjaecs7HpIuKRpKpt5WcoLzTLd1hstqNNhmTbBHmVo+EqIjMkpISUwDpDJNU5pki
 BPbdG9VXqb46JLaTtPT+U4gX4yJ3Bw==
 =jQCC
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200707' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- arch and board update for stm32mp15:
  - use OPP information in device tree for 800MHz/650MHz support
  - ram: inprovments of test command
  - solve boot on closed chip when access to DBGMCU_IDC is protected
  - stm32prog command: Add "device anme" during USB enumeration
  - update configs: activate WATCHDOG and 'env erase' command,
    increase teed partition, support SD card after NOR boot by default and
    use env info in env_check
  - some sboard cleanups: gpio hog in dh board, specific driver for
    type-c stusb1600 controller code in a driver move part of code in spl.c
    and in common directory
- fix STM32 compatible for dwc_eth_qos driver
- support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
  drivers
- vrefbuf: fix a possible overshoot when re-enabling
2020-07-07 14:00:44 -04:00
Tom Rini
c4df37bfa9 First set of u-boot-atmel features for 2020.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl8DHgAcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyAdDCACFX01IPRmdkNEYrJf0
 YfhQPAPZ/5EyHBv36ePl93CbIRnJPpnrGbBXe8+/Jdcq7l6EkJh2cuO+t9axXner
 m0kH35LzLiR9Olz6q5Su0InPWpnDtXxtIczK5v7ZHBeMZ2so763e7SQ2VIMyJJb/
 VT6hilqJK6+W1c2X1wmzxyh/nnv/bDBz97cavJN1EKw1arYr8jh/8/tpABk5msDm
 J6Z5WsS/CYk7cj6hX7dSNRfqcKsjl/gCYjnVssfgaP1sH+NX0mtS8C6zchNILmpB
 2T/dKnpYBBAWTD5fGNVKxKphAuZgQHw51AJhkOnYDrMKisifFC0ssvxkh+nvwyTm
 1w4R
 =1YzJ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel features for 2020.10 cycle
2020-07-07 12:55:57 -04:00
Volodymyr Babchuk
f8ddd8cbb5 arm64: issue ISB after updating system registers
ARM Architecture reference manual clearly states that PE pipeline
should be flushed after changes to some system registers. Refer to
paragraph "B2.3.5 Memory Barriers" at page B2-92 of "Arm Architecture
Reference Manual ARMv8 for ARMv8-A Architecture Profile" (ARM DDI
0487B.a).

Failing to issue instruction synchronization barrier can lead to
spurious errors, like synchronous exception when accessing FPU
registers. This is very prominent on CPUs with long instruction
pipeline, like ARM Cortex A72.

This change fixes the following U-Boot panic:

 "Synchronous Abort" handler, esr 0x1fe00000
 elr: 00000000800948cc lr : 0000000080091e04
 x0 : 00000000801ffdc8 x1 : 00000000000000c8
 x2 : 00000000800979d4 x3 : 00000000801ffc60
 x4 : 00000000801ffd40 x5 : ffffff80ffffffd8
 x6 : 00000000801ffd70 x7 : 00000000801ffd70
 x8 : 000000000000000a x9 : 0000000000000000
 x10: 0000000000000044 x11: 0000000000000000
 x12: 0000000000000000 x13: 0000000000000000
 x14: 0000000000000000 x15: 0000000000000000
 x16: 000000008008b2e0 x17: 0000000000000000
 x18: 00000000801ffec0 x19: 00000000800957b0
 x20: 00000000000000c8 x21: 00000000801ffdc8
 x22: 000000008009909e x23: 0000000000000000
 x24: 0000000000000000 x25: 0000000000000000
 x26: 0000000000000000 x27: 0000000000000000
 x28: 0000000000000000 x29: 00000000801ffc50

 Code: a94417e4 a90217e4 a9051fe6 a90617e4 (3d801fe0)

While executing instruction

 str     q0, [sp, #112]

in vsnprintf() prologue. This panic was observed only on Cortex A72 so
far.

This patch places ISBs on other strategic places as well.

Also, this probably is the right fix for the issue workarounded in the
commit 45f41c134b ("ARM: uniphier: add weird workaround code for LD20")

Reported-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Julien Grall <julien.grall.oss@gmail.com>
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
CC: Tom Rini <trini@konsulko.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-07 11:01:52 -04:00
Patrick Delaunay
6c393e8c0f ram: stm32mp1: add size and addr parameter to test all
Add size and addr parameter to test "All" to override the default
value (4kB and STM32_DDR_BASE) used in tests with these optional
parameters: [size] or [addr].

When other optional parameters are present before [addr],
they are replaced by default value:
- [loop] = "1"
- [pattern] = "-" (new: force default pattern)

Example to use:

DDR>test 0 1 0x20000

DDR>test 0 1 0x1000000 0xD0000000

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
81b66b9033 ram: stm32mp1: use the DDR size by default in the test addressBus
The test 4 = "AddressBus [size] [addr]" without parameter
detects alias for any address bit only when:
- size = real size of DDR
- addr = start of DDR = 0xC0000000

These value must be the default value when parameters are absent.

This patch sets bufsize to STM32_DDR_SIZE and get_bufsize() selects
the correct value for bufsize when this parameter is absent =
full size of the DDDR

On EV1 board :
DDR> test 4
running at 0xC0000000 length 0x40000000

On DK2 board
DDR> test 4
running at 0xC0000000 length 0x20000000

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
fcd4890829 ram: stm32mp1: add parameter addr in test FrequencySelectivePattern
Add a parameter addr in test FrequencySelectivePattern to select
the base address used to execute the tests.

Default value (when the parameter is absent) is STM32_DDR_BASE,
selected in get_addr() function.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
1a5be5a416 ram: stm32mp1: protect minimum value in get_bufsize
Add protection on minimum value for result of get_bufsize
and check the alignment of buffer size: only multiple min_size
is allowed; only 4 bytes alignment was checked previously
(value & 0x3).

For example the "Random" test raises an issue when size is not 8 bytes
aligned because address for buffer = address + size / 2 is not word
aligned.

This patch avoid test error for unsupported size value.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
c16cba88bd stm32mp1: use the command env info in env_check
Activate CMD_NVEDIT_INFO and use the new command "env info -d -p -q"
to automatically save the environment on first boot.

This patch allows to remove the env_default variable.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
8b5206d9e4 cmd: env: use ENV_IS_IN_DEVICE in env info
Use the define ENV_IS_IN_DEVICE to test if one the
CONFIG_ENV_IS_IN_...  is defined and correct the detection of
persistent storage support in the command "env info"
if CONFIG_ENV_IS_NOWHERE is activated.

Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with
other storage target") test CONFIG_ENV_IS_NOWHERE is not
enough; see also commit 953db29a1e9c6 ("env: enable saveenv
command when one CONFIG_ENV_IS_IN is activated").

This patch avoids issue for this command in stm32mp1 platform.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
6826d0d82b board: dh_stm32mp1: update the gpio hog support
This patch update the current gpio hog implementation with
the new API gpio_hog_probe_all() activated with CONFIG_GPIO_HOG.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
03fb03842a board: st: move type-c stusb1600 controller code in a driver
Migrate the ST Microelectronics STUSB160X Type-C controller code in
a generic I2C driver in st/common, based on Linux one in :
drivers/usb/typec/stusb160x.c

This patch simplifies the stm32mp1 board code and allows to reuse
this STUSB160X driver in other boards.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
d5d726d3cc configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp
In the boot command used in ST boards, bootcmd_stm32mp, only support
the SD card as second stage, where is found the bootfs with DISTRO.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
bd3f60d29c arm: stm32mp: protect DBGMCU_IDC access with BSEC
As debugger must be totally closed on Sec closed chip,
the DBGMCU_IDC register is no more accessible (self
hosted debug is disabled with OTP).

This patch adds a function bsec_dbgswenable() to check
if the DBGMCU registers are available before to access them:
BSEC_DENABLE.DBGSWENABLE = self hosted debug status.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
03c4e6224a arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration
Add "Device Name" in iproduct during DFU USB enumeration
to have this information in STM32CubeProgrammer trace
(this tools is compatible with @Name since v2.3)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
42400228dc board: st: stm32mp1: increase teed partition
With TEE 3.7.0, the partition teed (OP-TEE pageable
code and data) need to increase up to 512KB in NOR device.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
6072c220bd stm32mp1: configs: activate CMD_ERASEENV
Activate the command env erase to reset the environment with the command:
> env erase

it is simpler than:
> env default -a
> env save

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Fabrice Gasnier
8b8c99bd3e power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling
There maybe an overshoot:
- when disabling, then re-enabling vrefbuf too quickly
- or upon platform reset as external capacitor maybe slow
  discharging (VREFBUF is HiZ at reset by default).
VREFBUF is used by ADC/DAC on some boards. An overshoot on the reference
voltage make the conversions inaccurate for a short period of time. So:
- Don't put the VREFBUF in HiZ when disabling, to force an active
  discharge.
- Enforce a 1ms OFF/ON delay, also upon reset

Penalty is a 1ms delay is applied (even for a cold boot), when enabling
VREFBUF.

Fixes: 93cf0ae775 ("power: regulator: Add support for stm32-vrefbuf")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
2ee5005dea configs: stm32mp1: activate WATCHDOG
As kernel v5.6 have a solution since so we will be able to enable
the watchdog at boot time. It is reloaded by the watchdog
framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set) and
until the userspace watchdog daemon takes over control.

Need presence of kernel patch 85fdc63fe256 ("drivers: watchdog:
stm32_iwdg: set WDOG_HW_RUNNING at probe") integrated in v5.6-rc1.

This patch revert the previous commit ca351e705a ("stm32mp1:
deactivate WATCHDOG in defconfig").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
da7a0bb1f2 pinctrl: stm32: add information on pin configuration
Add information on pin configuration used for pinmux command:
- bias configuration for output (disable, pull up, pull down)
- otype for input (open drain or push pull)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
5593333c2e pinctrl: stmfx: add information on pin configuration
Add information on pin configuration used for pinmux command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
8d895efffe gpio: stmfx: add ops get_dir_flags
Add support of ops get_dir_flags() to read dir flags from
STMFX registers.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
22b3fe4224 gpio: stmfx: add ops set_dir_flag
Manage the flags for GPIO configuration:
- open_drain, push_pull
- pull_up, pull_down

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
fabb6e14c8 gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg
Add the helper functions stmfx_read_reg() and stmfx_write_reg() to avoid
duplicated code for access to stmfx's register with mask.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
067c7398d5 gpio: stmfx: rename function used to change pin configuration
Rename the two function used to change the pin configuration
from stmfx_pinctrl_.. stmfx_conf_... to clarify the function usage.

No functional change.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
84115cd066 gpio: stmfx: move function to prepare new ops introduction
Move the functions stmfx_pinctrl_set_pupd and stmfx_pinctrl_set_type;
they can be used by the new ops get_dir_flags and set_dir_flags introduced
by next patch.

No functional change.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
43efbb6a3e gpio: stm32: add ops get_dir_flags
Add ops get_dir_flags() to read dir flags from GPIO registers.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
f13ff88b61 gpio: stm32: add ops set_dir_flags
Manage flags for GPIO configuration:
- open_drain, open_source, push_pull
- pull_up, pull_down

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
29e4ce3c97 board: stm32mp1: update the gpio hog support
This patch updates the current gpio hog implementation and uses
the new API gpio_hog_probe_all(), activated with CONFIG_GPIO_HOG.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
9ebc326c08 configs: stm32mp1: activate CONFIG_GPIO_HOG
This patch activates the new configuration CONFIG_GPIO_HOG.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
4fb46816c7 board: stm32mp1: move the function board_debug_uart_init in spl.c
Move the debug function board_debug_uart_init in spl.c
as the debug_uart_init() function is called in arch_cpu_init()
only for SPL and remove the board.c file.

For TFABOOT, the UART TX pin configuration is done in TF-A.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
4a87fea6de ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL
This patch allows to switch the CPU frequency to 800MHz on the
ST Microelectronics board (DK1/DK2 and EV1) or dh electronics SOM
using the STM32MP15x SOC and when it is supported by the HW
(for STM32MP15xD and STM32MP15xF).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
2f238327b7 board: stm32mp1: update vddcore in SPL
For board using STPMIC1, the vddcore is provided by BUCK1 of STPMIC1
and need to be updated for 800MHz support and only after the clock
tree initialization.

The VDDCORE voltage value is provided by clock driver, saved in global
variable opp_voltage_mv and udpated in SPL board_early_init_f(),
just after clock tree initialization.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
d1a4b09de6 board: st: stpmic1: add function stpmic1_init
Add a function stmpic_init to early initialize the PMIC STPMIC1
- keep vdd on during the reset cycle (to avoid issue when backup battery
  is absent)
- Check if debug is enabled to program PMIC according to the bit

This patch allows to remove the compilation of spl.c file from stm32mp1
board in dh_stm32mp1.

CONFIG_SPL_BOARD_INIT is removed as the new function is called earlier
in SPL, in the function board_early_init_f.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
4e62642aef arm: stm32mp: add weak function to save vddcore
Add a weak functions to save the vddcore voltage value provided
in the OPP node when the clock tree is initialized.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
37ad8377af stm32mp1: clk: configure pll1 with OPP
The PLL1 node (st,pll1) is optional in device tree, the max supported
frequency define in OPP node is used when the node is absent.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
918e9c3d63 board: st: create common file stpmic1.c
Move function board_ddr_power_init() in a new file stpmic1 in
board/st/common to avoid duplicated code in each board using
stpmic1

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
6f2e0ad194 ARM: dts: stm32: add cpufreq support on stm32mp15x
This commit adds cpufreq support on stm32mp15x SOC. STM32 cpufreq uses
operating points V2 bindings (no legacy). Nvmem cells have to be used to
know the chip version and then which OPPs are available. Note that STM32
cpufreq driver is mainly based on "cpufreq-dt" driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
95bd49a5aa arm: stm32mp: spl: add bsec driver in SPL
Add the bsec driver in SPL, as it is needed by SOC part number detection
to found the supported OPP.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00