Commit graph

12011 commits

Author SHA1 Message Date
Peng Fan
fb0128736b i2c: mxc_i2c: Use or operation
The operation should be OR, not BIT OR.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-01-16 06:59:39 +01:00
Peng Fan
0074d4bf2d i2c: lpi2c: do not add 4 for bus seq
The number 4 is dedicated on i.MX7ULP, but lpi2c will be reused on i.MX8,
4 is not valid. The seq number could be configured by alias node.

The following patch will use i2c4 as the begin for i.MX7ULP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-16 06:58:59 +01:00
Tom Rini
fdb6c3232f Merge git://git.denx.de/u-boot-net 2018-01-15 19:01:23 -05:00
Tom Rini
8e9801c283 Merge git://git.denx.de/u-boot-imx 2018-01-15 16:44:18 -05:00
Jorge Ramirez-Ortiz
0689eb7470 db410c: replace reset driver with psci
this should be the norm for armv8 platforms.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
e0cc0b6c6d db820c: enable pmic gpios for pm8994
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Zhao Qiang
1e2d2597a6 phy: atheros: set auto-negotiation for AR8021
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:27 -06:00
Nobuhiro Iwamatsu
dcd18eaf61 net: sh-eth: Add to Kconfig and convert
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Nobuhiro Iwamatsu
aae5d237b9 net: sh-eth: Fix misaligned cache operation warning
When we using network on board using sh-eth, it prints a lot of
"CACHE: Misaligned operation at range" messages.
This commit fixes this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Nobuhiro Iwamatsu
fbfb511548 net: sh-eth: Change read/write() param to struct sh_eth_info
This changes Change structure used in sh_eth_read and sh_eth_write function
from struct sh_eth_dev to struct sh_eth_info. This is necessary to convert
to Driver Model.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:25 -06:00
Nobuhiro Iwamatsu
9b5f9ecf6e net: sh-eth: Remove bd_t from sh_eth_config()
bd_t is not used in sh_eth_config(). This deletes bd_t from sh_eth_config()

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:24 -06:00
Nobuhiro Iwamatsu
dc14867d0f net: sh-eth: Fix coding style checked by checkpatch.pl
This fixes the chord style checked by checkpatch.pl.
Details of change details are as follows:

 - Fix typo
    Change from alligned to aligned.
 - Remove whitespace before ','
 - Add spaces preferred around that '|'
 - Fix missing a blank line after declarations
 - Remove space after a cast declaration
 - Fix format of block comments
 - Add a blank line after function/struct/union/enum declarations

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:24 -06:00
Florian Fainelli
f3d78fbfaf net: phy: b53: Add b53_reg read/write commands
Add a b53_reg read/write command which allows inspecting the switch
registers. Because the Broadcom BCM53xx registers have different sizes,
we need to split the accesses in 8, 16, 32, 48 or 64 bits to obtain
expected results.

Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:22 -06:00
Florian Fainelli
7a9ca9db40 net: designware: Pad small packets
Make sure that we pad small packets to a minimum length of 60 bytes
(without FCS). This is necessary to interface with Ethernet switches
that will reject RUNT frames unless padded correctly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:21 -06:00
Florian Fainelli
137963d71a net: phy: Add Broadcom BCM53xx switch driver
Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of the switch hardware such that each user visible port
(configurable) and the CPU port can forward packets between each other
while preserving isolation with other ports.

This is useful for e.g: the Lamobo R1 board featuring a Broadcom
BCM53125 switch.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:21 -06:00
Patrice Chotard
ba1f966725 net: designware: add clock support
This implementation manages several clocks, disable and
free all of them in case of error during probe and in remove
callback.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:20 -06:00
Patrice Chotard
ea8cd652a7 dm: core: add missing dev_count_phandle_with_args()
Add missing dev_count_phandle_with_args() to avoid
compilation issue.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:19 -06:00
Jason Brown
32ac8b0bba net: mvneta - Fixed recv() when multiple packets have arrived.
This patch fixes a problem in the mvneta driver where if more than
one packet arrives between calls to mvneta_recv(), the additional
descriptors will be marked as free even though only one descriptor
has been read and processed from the receive queue.  This causes
the additional packet(s) to be delayed until the next packet arrives.
>From this point on all packets will be delayed because the receive
queue will contain unprocessed packets but the hardware shows no
busy descriptors.

Signed-off-by: Jason Brown <jason.brown@apcon.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:19 -06:00
Chris Brandt
33bab10457 net: miiphybb: fix casting error
Since the return value is a signed int, if the leading MSB of rdreg is a 1,
it will get signed extended and will return a negative value which is an
error even though we read the correct value.

Fixes: dfcc496ed7 ("net: mii: Changes not made by spatch")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:17 -06:00
Chris Brandt
f6ac626c8a net: sh-eth: remove sh_eth_offset_rz table
First, this table could never be included in the build anyway because
SH_ETH_TYPE_RZ is not defined until later in the file.
Second, the register PIR was missing, so PHY MDIO never worked.
Third, after adding the PIR register, the table is EXACTLY the same as
sh_eth_offset_gigabit, so there is no value to it.

Therefore, just delete it use the gigabit one.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:17 -06:00
Chris Brandt
5ad565b0d1 net: sh-eth: fix inl and outl definitions
The macros inl and outl maybe already be defined from file
arch/arm/include/asm/io.h so there may be no reason to define them.
And if you do try defined them here, you get a redefined complier warning.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:16 -06:00
Lukasz Majewski
ce27eb9b40 net: phy: marvell: Add functions to read PHY's extended registers
This commit allows extended Marvell registers to be read with:

foo > mdio rx FEC 3.10
Reading from bus FEC
PHY at address 0:
3.16 - 0x1063
foo > mdio wx FEC 3.10 0x1011

The above code changes the way ETH connector LEDs blink.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:16 -06:00
Joe Hershberger
3cacc6a772 net: Fix buffer overrun error in netconsole
Need to not access the byte after the input_buffer.

Reported-by: Coverity (CID: 144423)
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:14 -06:00
Wilson Lee
4bf56913d0 net: macb: Add support for Xilinx Zynq SoC
Although Xilinx Zynq SoC was using MACB similar hardware. However,
U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is
to add support for the Xilinx Zynq SoC to the existing MACB network
driver.

This patch is to add Zynq GEM DMA Config, provide callback
function for different linkspeed for case of using Xilinx Zynq
Programmable Logic as GMII to RGMII converter.

This patch convert the return value to use error codes.

Signed-off-by: Wilson Lee <wilson.lee@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
Cc: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:14 -06:00
Rob Clark
f2006808f0 dm: core: parse chosen node
This is the node that would contain, for example, the framebuffer setup
by an earlier stage.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15 11:35:38 -05:00
Jorge Ramirez-Ortiz
210d959294 spmi: msm: display the PMIC Arb version (debug)
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 11:35:37 -05:00
Tom Rini
3dde8f2037 Merge git://git.denx.de/u-boot-mmc 2018-01-14 22:26:38 -05:00
Peng Fan
db359efd59 mmc: fsl_esdhc: Fix eMMC 1.8v setting issue
Current USDHC driver will reset VSELECT to 0 (3.3v) during mmc init,
then set to 1 for 1.8v eMMC I/O. When booting from eMMC, since ROM has
already set VSELECT to 1.8v before running the u-boot. This reset in
USDHC driver causes a short 2.2v pulse on CMD pin.

Fix this issue by not reset VSELECT to 0 when 1.8v flag is set.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-13 00:08:44 +09:00
Tom Rini
8c0bb85824 power: Rearrange code to guard power command with CONFIG_SPL_BUILD guard
In order to discard this code when unused in SPL we need to guard the
command with a check for CONFIG_SPL_BUILD and we rearrange the code
slightly to make this cleaner.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-13 00:07:57 +09:00
Koen Vandeputte
f57263ee9b drivers: pci: imx: fix enumeration logic error
By default, the subordinate is set equally to the secondary bus (1) when
the RC boots, and does not alter afterwards.

This means that theoretically, the highest bus reachable downstream is
bus 1.

Force the PCIe RC subordinate to 0xff, otherwise no downstream
devices will be detected behind bus 1 if the booting OS does not allow
enumerating a higher busnr than the subordinate value of the primary
bus.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-12 14:28:04 +01:00
Peng Fan
afe8e1b033 spi: fsl_qspi: support i.MX6UL/6ULLL/7D
The QSPI module on i.MX7D is modified from i.MX6SX. The module used on
i.MX6UL/6ULL is reused from i.MX7D. They share same tx buffer size.

The endianness is not set at qspi driver initialization. So if we don't
boot from QSPI, we will get wrong endianness when accessing from AHB
address directly.

Add the compatible entry for 6ul/7d.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
67b71df277 pci: imx: request gpio before use
Before use GPIO, we need to request gpio first. Free gpio after use.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <ssbabic@denx.de>
2018-01-12 14:28:04 +01:00
Peng Fan
8df42bee0e misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to
write once, because they use ECC mode. Multiple writes may damage
the ECC value and cause a wrong fuse value decoded when reading.
This patch adds a checking before the fuse word programming, only
can write when the word value is 0.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Jean-Jacques Hiblot
b7a6e2c9c3 mmc: remove hc_wp_grp_size from struct mmc if not needed
hc_wp_grp_size is needed only if hardware partitionning is used.
On ARM removing it saves about 30 bytes of code space.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
173c06dfcc mmc: don't read the size of eMMC enhanced user data area in SPL
This information is only used by the "mmc info" command.
On ARM removing this information from SPL saves about 140 of code space.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
e6fa5a5461 mmc: compile out erase and write mmc commands if write operations are not enabled
Also remove erase_grp_size and write_bl_len from struct mmc as they are
not used anymore. On ARM, removing them saves about 100 bytes of code
space in SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
5b2e72f327 mmc: read ssr only if MMC write support is enabled
The content of ssr is useful only for erase operations.
on ARM, removing sd_read_ssr() saves around 300 bytes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
d6400c3f85 mmc: add a Kconfig option to enable the support for MMC write operations
This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code
needed only if write support is required.
The option is added for u-boot and for SPL

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
58a6fb7b04 mmc: reworked version lookup in mmc_startup_v4
Using a table versus a switch() structure saves a bit of space

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
baef2070a4 mmc: compile out more code if support for UHS and HS200 is not enabled
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:23 +09:00
Jean-Jacques Hiblot
9b79dbd201 mmc: atmel: when sending a data command, use the provided block size
struct mmc_data contains the block size to use for the data transfer.
Use this information instead of using the default value or the block length
information stored in struct mmc.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:23 +09:00
Jean-Jacques Hiblot
49f89252ed dm: mmc: sandbox: Update SD card emulation
The SDcard initialization procedure does a few more things than it did earlier:
* switch the bus width even for 1-bit bus width
* check that speed has been properly set (in resp[4] of SD_CMD_SWITCH_FUNC)

Update the SD simulator to handle those requests gracefully.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
cf17789e07 mmc: make optional the support for eMMC hardware partitioning
Not all boards have an eMMC and not all users have a need for this.
Allow to compile it out. By default it is still included.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
f99c2efe56 mmc: make UHS and HS200 optional
Supporting USH and HS200 increases the code size as it brings in IO voltage
control, tuning and fatter data structures.
Use Kconfig configuration to select which of those features should be
built in.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
d8e3d42089 mmc: convert most of printf() to pr_err() and pr_warn()
This allows to compile out the log message by tweaking the LOGLEVEL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
f7d5dffc65 mmc: don't use malloc_cache_aligned()
Not using this function reduces the size of the binary. It's replaces by
a standard malloc() and the alignment requirement is handled by an
intermediate buffer on the stack.

Also make sure that the allocated buffer is freed in case of error.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
1de06b9fa5 mmc: fix for old MMCs (below version 4)
The ext_csd is allocated only for MMC above version 4. The compare will
crash or fail for older MMCs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
1da8eb598f mmc: all hosts support 1-bit bus width and legacy timings
Make sure that those basic capabilities are advertised by the host.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
00e446fa04 mmc: Fixed a problem with old sd or mmc that do not support High speed
As the legacy modes were not added to the list of supported modes, old
cards that do not support other modes could not be used.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
7abff2c3b3 dm: mmc: update mmc_of_parse()
* convert to livetree API
* don't fail because of an invalid bus-width, instead default to 1-bit.
* recognize 1.2v DDR and 1.2v HS200 flags

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00