Commit graph

15 commits

Author SHA1 Message Date
Kumar Gala
ff4e66e93c pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
can be confusing when reading the code.

Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
for system memory mapping purposes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-07 23:50:04 +01:00
Haiying Wang
4e190b03aa Make Freescale local bus registers available for both 83xx and 85xx.
- Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
  can be shared by both 83xx and 85xx
- Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
  files which use lbus83xx_t.
- Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
  85xx can share them.

Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-29 11:12:53 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Anton Vorontsov
d26154c9a6 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
The spd_dram code shifts the base address, then masks 20 bits, but
forgets to shift the base address back. Fix this by just masking the
base address correctly.

Found this bug while trying to relocate a DDR memory at the base != 0.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-09-24 09:58:33 -05:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Kim Phillips
94fab25f5f mpc83xx: rm remaining FLAT_TREE code
..in board pci.c files

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08 09:56:42 -06:00
Kim Phillips
b3458d2cd5 mpc83xx: remove FLAT_TREE code
need to rm it from pci code, too!

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08 09:56:42 -06:00
Kim Phillips
5b8bc606c6 mpc83xx: convert to using do_fixup_*()
convert to using simpler mpc85xx style fdt update code; streamline by
eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
the old school FLAT_TREE code from 83xx (since the sbc8349 was just
converted over to using libfdt).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08 09:56:42 -06:00
Paul Gortmaker
2408b3f20b sbc8349: migrate board to libfdt
This adds libfdt support code for the Wind River sbc8349 board.

Parallel of commit 3fde9e8b22 for
the other Freescale 83xx boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-01-08 09:55:41 -06:00
Paul Gortmaker
27a256a90c sbc8349: Remove board specific ECC code
ECC code is now shared for all 83xx boards, so remove board specific one.
See commit daab8c67d2 for reference.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-01-08 09:55:41 -06:00
Kim Phillips
bbea46f76f mpc83xx: implement board_add_ram_info
add board_add_ram_info, to make memory diagnostic output more
consistent. u-boot banner output now looks like:

DRAM:  256 MB (DDR1, 64-bit, ECC on)

and for boards with SDRAM on the local bus, a line such as this is
added:

SDRAM: 64 MB (local bus)

also replaced some magic numbers with their equivalent define names.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 23:12:24 -05:00
Grant Likely
e1a6144c32 Remove obsolete mpc83xx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:13 +02:00
Paul Gortmaker
91e2576977 mpc83xx: U-Boot support for Wind River SBC8349
I've redone the SBC8349 support to match git-current, which
incorporates all the MPC834x updates from Freescale since the 1.1.6
release,  including the DDR changes.

I've kept all the SBC8349 files as parallel as possible to the
MPC8349EMDS ones for ease of maintenance and to allow for easy
inspection of what was changed to support this board.  Hence the SBC8349
U-Boot has FDT support and everything else that the MPC8349EMDS has.

Fortunately the Freescale updates added support for boards using CS0,
but I had to change spd_sdram.c to allow for board specific settings for
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
default if the board doesn't specify a value.)

Hopefully this should be mergeable as-is and require no whitespace
cleanups or similar, but if something doesn't measure up then let me
know and I'll fix it.

Thanks,
Paul.
2007-03-02 11:05:53 -06:00