Commit graph

11 commits

Author SHA1 Message Date
Faiz Abbas
0abf600746 arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocks
Update the dummy clock names to use unique identifiers. Otherwise the
previous node just gets overwitten by the next one with the same name.
This fixes eMMC boot not working on J721e-evm.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09 08:33:16 +08:00
Lokesh Vutla
fde109dc75 arm: dts: k3-j721e-r5-common-proc-board: Disable power-domains for mcu uart
mcu uart will be used during uart boot for loading sysfw.itb. Since
sysfw is not yet available during uart load, power-domain cannot be
enabled. We need to rely on ROM for doing that, so disable power-domains
and clocks for mcu uart. Also fix the mcu uart frequency.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13 21:39:17 +05:30
Vignesh Raghavendra
b6427783a8 arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPL
IO expanders are required to power cycle SD card. So enable the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
b070f58b44 arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral mode
Enable USB0 in peripheral mode so that it be used for DFU

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Faiz Abbas
ccc855e9d9 arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card
Add pinmux for sdhci1 node connected to the SD card.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Vignesh Raghavendra
5aeab3bf5e arm: dts: k3-j721e: Add DT nodes for USB
J721e has two instances of Cadence USB3 controller. Add DT nodes for the
same. USB0 is configured to device mode and USB1 is configured to host
mode. For now only high speed mode is supported.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Keerthy
2f71498d52 arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supply
Hook buck12_reg to vtm avs supply

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
0f63ceaf54 arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 node
Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
69eceae870 arm: dts: k3-j721e-r5-common-proc-board: Add VTM node
Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Lokesh Vutla
ec2fa9f76e arm: dts: k3-j721e: Add ddr node
Use the 3733MTs DDR configuration that is auto generated from
DDR_Regconfig tool.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2019-10-25 17:33:21 -04:00
Lokesh Vutla
aebb2a499e arm: dts: k3-j721e: Add r5 specific dt support
Add initial support for dt that runs on r5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26 21:49:29 -04:00