Commit graph

27 commits

Author SHA1 Message Date
Clément Laigle
04d57b1d58 mtd: add spi flash id s25fl128l
Add support for SPANSION s25fl128l

Signed-off-by: Clément Laigle <c.laigle@catie.fr>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[jagan: fixed , at the end of } ]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-03 11:09:53 +05:30
Ludwig Zenz
51b2411946 sf: add paired dev info for winbond w25q16jv
This commit adds paired dev info for winbond w25q16jv
(tested w25q16jvssiq with a i.mx6 board)

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:17:13 +05:30
Ludwig Zenz
70cff76c38 sf: add Macronix mx25l1633e entry
Add support for the Macronix mx25l1633e nor flash. (Tested on a imx6 board)

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:14:42 +05:30
Ludwig Zenz
b1360e2fc9 sf: add Gigadevice gd25q16c entry
Add support for the Gigadevice gd25q16c nor flash. (Tested on a imx6 board)

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:14:42 +05:30
Hannes Schmelzer
760b75564f spi_flash: add a bunch of winbond flashes to id-table
This commit adds the following flashes to the id-table

- W25Q16JV
- W25Q32JV
- W25Q64JV
- W25Q128JV
- W25Q256JV

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:05:50 +05:30
Marek Vasut
069b746ad9 sf: Enable FSR polling on N25Q256(A)
The N25Q256(A) datasheet clearly states that this device does have
a Flag Status Register and does update FSR PEC bit 7 during Program
and Erase cycles to indicate the cycle is in progress. Enable the
FSR PEC bit polling on this device to prevent data corruption.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Tom Rini <trini@konsulko.com>
2018-06-28 19:58:40 +05:30
Ashish Kumar
51dce7d2bf mtd: spi: Correct parameters for s25fs512s flash
Change sector size to 256KiB in table spi_flash_ids.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-25 15:50:33 +05:30
Carlo Caione
b1f2b72e39 sf: Add support for gd25q32b gigadevice flash
This flash IC is used in some chromebook models
manufactured by Bitland.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-04 23:40:04 +05:30
Marek Vasut
a2569f12f0 sf: Add Macronix MX25U25635F ID
Add ID for the Macronix MX25U25635F flash.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-29 10:05:52 +05:30
Marek Vasut
d8c16849a9 sf: Add Winbond W25Q256 ID
Add ID for the Winbond W25Q256 flash.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-29 10:05:32 +05:30
Kimmo Rautkoski
39b9e9bc72 sf: Add support for ISSI is25wp
Added support for is25wp032, is25wp064 and is25wp128.

Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-16 18:50:25 +05:30
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Sean Nyekjaer
4d95ed39a1 sf: Add Spansion s25fl208k entry
Add entry for Spansion s25fl208k part.

Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-19 16:57:19 +05:30
Eugeniy Paltsev
a19e97157c mtd: sf: add support for sst26wf016, sst26wf032, sst26wf064
This commit adds support for the SST sst26wf016, sst26wf032
and sst26wf064 flash IC.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-19 16:54:25 +05:30
Marek Vasut
0a84925974 sf: Add ISSI IS25LP256 entry
Add entry for ISSI IS25LP256 part.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@openedev.com>
2018-02-23 10:40:52 -05:00
Sean Nyekjaer
065592b40b mtd/spi: fix block count for is25lq040b
This spi-nor is 4Mbit/512KB

Fixes: b4fbcbc5a5 ("mtd/spi: add support for is25lq040b")
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-12-19 17:33:48 +05:30
Sean Nyekjaer
b4fbcbc5a5 mtd/spi: add support for is25lq040b
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-21 19:24:47 +05:30
Vsevolod Gribov
db10809c17 Fix s25fl256s position in spi_flash_ids list
Spansion S25FS256S and S25FL256S flashes have equal JEDEC ID and ext ID.
As far as S25FL256S occures in spi_flash_ids before S25FS256S, U-Boot
incorrectly detects FS flash as FL. Thus its better to compare with
S25FS256S first.

Signed-off-by: Vsevolod Gribov <vgribov@larch-networks.com>
[Added S-o-b]
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-09-25 13:00:34 +05:30
Marek Vasut
545a438222 sf: Fix S25FL116K entry
The flash chip is 2 MiB , organized as 32 x 64 kiB sectors .
Rectify the entry to match the datasheet, reality and Linux SNOR IDs.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-09-25 12:54:10 +05:30
Yogesh Gaur
811b6be166 mtd/spi: Add MT35XU512ABA1G12 NOR flash support
Add MT35XU512ABA1G12 parameters to NOR flash parameters array.

The MT35XU512ABA1G12 only supports 1 bit mode and 8 bits. It can't support
dual and quad. Supports subsector erase with 4KB granularity, have support
of FSR(flag status register) and flash size is 64MB.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-09-25 12:51:20 +05:30
rick
6d3cb0fdcd nds32: mtd: add spi flash id MX25U16335E.
To support MACRONIX MX25U1635E 16M-BIT flash.

Signed-off-by: rick <rick@andestech.com>
2017-09-21 10:30:22 +08:00
Bin Meng
ac6777b1e3 sf: Add Macronix MX25U6435F device parameters
This adds support for Macronix flash MX25U6435F (device ID 0xc22537).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-08 12:26:05 +05:30
Radu Bacrau
1f3232d2a1 sf: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02G
This commit adds support for the Macronix MX66U51235F,
MX66L1G45G and Micron MT25QU02G, MT25QL02G flash parts.

Signed-off-by: Radu Bacrau <dumitru.bacrau@intel.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Radu Bacrau <radu.bacrau@gmail.com>
[Update proper commit header and 80-line cut on body]
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-22 11:58:59 +05:30
Jagan Teki
94b653b3df sf: Fix s25fs512s id table
s25fs512s and s25fl512s_256k have common id information
till 5 bytes and 6th byte have different family id
like FS and FL-S as 0x81 and 0x80.

Reported-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-11-19 08:41:54 +05:30
Jagan Teki
a881374ddb sf: ids: Use small letter in ext_jedec
Use small 'd' in s25s512s ext_jedec

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18 13:04:54 +05:30
Jagan Teki
7a9b4359cb sf: ids: Use small letter's with flash name
For readability use small letter's with flash name.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18 13:04:54 +05:30
Jagan Teki
6645fd2c18 sf: Rename sf_params.c to spi_flash_ids.c
Now the flash params table as renamed to spi_flash_ids structure,
so rename the sf_params.c to spi_flash_ids.c and remove the legacy.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2016-11-18 13:04:54 +05:30
Renamed from drivers/mtd/spi/sf_params.c (Browse further)