Commit graph

85275 commits

Author SHA1 Message Date
Vincent Stehlé
ac2ac69080 doc: uefi: fix links
Fix a couple of links so that they are rendered correctly with sphinx.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13 13:56:14 +01:00
Heinrich Schuchardt
3080ddf970 test: unit test for crc8
Add a unit test for the crc8() function.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:56:14 +01:00
Simon Glass
61a6210541 video: Add a note about the broken implementation
The cls command is broken. Previous discussion about this was at [1] and
[2]. For now, add a note to the source code.

[1] https://patchwork.ozlabs.org/project/uboot/patch/
       20221022092058.106052-1-heinrich.schuchardt@canonical.com/
[2] https://patchwork.ozlabs.org/project/uboot/patch/
       20230106145243.411626-12-sjg@chromium.org/

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
b7adb69e9a efi: Add dhrystone, dcache and scroll lines to app
Add these options to provide some performance measurement, see cache
status and slightly speed up the appallingly slow console.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
a76b60f820 video: Clear the vidconsole rather than the video
It is better to clear the console device rather than the video device,
since the console has the text display. We also need to reset the cursor
position with the console, but not with the video device.

Add a new function to handle this and update the 'cls' command to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
9f62a472df video: Remove duplicate cursor-positioning function
There are two functions for positioning the cursor on the console. Remove
one of them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
1f0cf89227 efi: Adjust script to show pre-relocation output on terminal
When running with video enabled, the pre-relocation output of U-Boot is
currently lost. Add a -serial flag to show it on the terminal.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
38191594df bbinfo: Show the size of the copy framebuffer
If the copy framebuffer is enabled, show its size.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
315e367977 video: Allow a copy framebuffer with pre-allocated fb
At present it is not possible for the video driver to use a pre-allocated
frame buffer (such as is done with EFI) with the copy framebuffer. This
can be useful to speed up the display.

Adjust the implementation so that copy_size can be set to the required
size, with this being allocated if the normal framebuffer size is 0.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
f62229227c efi: Support copy framebuffer
Add support for this to EFI in case it becomes useful. At present it just
slows things down. You can enable CONFIG_VIDEO_COPY to turn it on.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
4f9a8f33f0 efi: Use a fixed value for the timer clock
It is not yet clear how to read the timer via EFI. The current value seems
much too high on a Framework laptop I tried. Adjust it to a lower
hard-coded value for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
40b8afe6f6 x86: Add a few more items to bdinfo
Add the timer and vendor/model information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
644e61448c efi: Support a 64-bit frame buffer address
The current vesa structure only provides a 32-bit value for the frame
buffer. Many modern machines use an address outside the range.

It is still useful to have this common struct, but add a separate
frame-buffer address as well.

Add a comment for vesa_setup_video_priv() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
57fa418224 efi: video: Return mode info for app also
The mode info is currently not initialised for the app. Fix this by
returning it from the function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
88753816cf efi: video: Move payload code into a function
Put this into a function, as we have done for the app implementation.
Comment both functions. FOr now the app still does not access it
correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Ovidiu Panait
7ac50f88f8 microblaze: drop remnants of manual reloc
Runtime relocation has been made the default for microblaze, so do the
following cleanups:
- drop all manual reloc codepaths in start.S
- drop all STATIC_RELA ifdefs, as it is now enabled unconditionally in
Kconfig

Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230311173838.521804-5-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13 11:46:17 +01:00
Ovidiu Panait
3363cf96eb microblaze: drop CONFIG_NEEDS_MANUAL_RELOC
Microblaze and m68k are the only remaining architectures that still enable
CONFIG_NEEDS_MANUAL_RELOC by default.

Microblaze has had runtime relocation support using CONFIG_STATIC_RELA for
quite some time, since commit d58c007498 ("microblaze: Add support for run
time relocation"). Drop support for CONFIG_NEEDS_MANUAL_RELOC and make
runtime relocation the default, as the rest of the architectures do.

Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230311173838.521804-4-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13 11:46:17 +01:00
Ovidiu Panait
02d30e5f92 tools: relocate-rela: add support for handling 32-bit big endian files
Currently, a microblaze build with CONFIG_SYS_BIG_ENDIAN=y and
CONFIG_STATIC_RELA=y fails with:
tools/relocate-rela: Not supported machine type
ELF decoding failed
make[2]: *** [u-boot/Makefile:1306: u-boot-nodtb.bin] Error 1

To fix this, convert the 32-bit codepath to use the previously added
elf{16,32}_to_cpu() functions. The aarch64 codepath is left untouched.

This commit ensures that CI doesn't fail for the next patches which enable
runtime relocation by default for microblaze.

Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230311173838.521804-3-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13 11:46:17 +01:00
Ovidiu Panait
424f04fcd9 tools: relocate-rela: introduce elf16_to_cpu() and elf32_to_cpu()
Add elf16_to_cpu() and elf32_to_cpu() functions that allow to read data in
both big-endian and little-endian formats.

Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230311173838.521804-2-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13 11:46:17 +01:00
Ovidiu Panait
26c8c1bd12 tools: relocate-rela: adjust le64_to_cpu -> le32_to_cpu in decode_elf32()
The sh_addr/sh_offset/sh_size fields in Elf32_Shdr are 32-bits wide, so
use le32_to_cpu() instead of the 64-bit variant.

Fixes: 5e0e1a86d3 ("tools: relocate-rela: Fix ELF decoding on big-endian hosts")
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230311173838.521804-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13 11:46:17 +01:00
Tom Rini
1247fc7de8 Merge https://source.denx.de/u-boot/custodians/u-boot-usb
Two minimal Kconfig/Makefile fixes for USB.
2023-03-10 19:10:14 -05:00
Tom Rini
0e823300f5 Merge https://source.denx.de/u-boot/custodians/u-boot-sh
Assorted Renesas fixes below, namely MMC clocking breakage fix, clock
Kconfig fix, pin control unused symbols removal, and sysinfo fix and
enablement on now fixed platforms.
2023-03-10 19:09:59 -05:00
Tom Rini
6c1cdf158c fixes and tests for the fdt command
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmQLmIQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZ+pgf/YIoUDOMVFtAQ6gZqaF5fPvLUGb10aPpI
 UmjNU87MJ4DJ8DXMAf14MNU4QsEiiz9gZmmrcA9pQ5/fN4BdN4TGi9BSvC287wYv
 CZ5u0OQAz4GrY+3zq+sbj6R+qKHgSDzzMu+EPZcXjtqgY0rgMoThdbLCtkciNLrZ
 8NiINL10cI/RhhhN3mNje7aGzJNmU1KWqfcWBIr0f/c8b8MUKA6N4AQUhR8wABQC
 sR/mS6zBlgFGaOWOHAWt9xDvFEDKzfJerRAAlz9xEd0QirUF0GyQBJd5vTzkIaTT
 Lme8zMI6iy/yKs+wZcfchfYY3tkpyue5U61jKplJOPUEl2dfrBly/w==
 =yoN9
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10mar23' of https://source.denx.de/u-boot/custodians/u-boot-dm

fixes and tests for the fdt command
2023-03-10 16:01:52 -05:00
Tam Nguyen
ae08097faa ARM: dts: renesas: Enable sysinfo on R-Car D3 Draak
Enable support for sysinfo on R-Car D3 Draak board. The sysinfo is used
e.g. to access and decode board-specific information and then in turn
used by board-info to print those information.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Drop compatible from I2C node, this is in r8a77995.dtsi already.
        Drop status = "okay" from EEPROM node.
	Add dts: tag.
	Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-10 17:46:09 +01:00
Tam Nguyen
c8eaebb426 ARM: dts: renesas: Enable sysinfo on R-Car V3H Condor/Condor-I
Add new sysinfo IDs for R-Car V3H Condor/Condor-I .

Enable support for sysinfo on R-Car V3H Condor/Condor-I. The sysinfo is
used e.g. to access and decode board-specific information and then in
turn used by board-info to print those information.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Drop compatible from I2C node, this is in r8a77980.dtsi already.
        Drop status = "okay" from EEPROM node.
	Add dts: tag.
	Update the commit message, note the new sysinfo IDs.
	Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-10 17:46:09 +01:00
Tam Nguyen
b791b9cf55 sysinfo: rcar3: Fix Draak and Eagle board code
Correct the board code ID based on the hardware documentation

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10 17:46:09 +01:00
Marek Vasut
ce46817215 pinctrl: renesas: Drop non-existent PFC info table entries
Remove PFC info table entries which are never instantiated,
since there are no drivers for those. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10 17:46:09 +01:00
Marek Vasut
3efdf01fa4 clk: renesas: Always select DM_RESET to prevent inobvious failure of rst_gen3 subdriver
The CLK_RCAR_GEN3 registers two subdrivers, clk_gen3 and rst_gen3.
The former depends on the clock framework, which is always enabled
in this context of clock framework driver, while the later depends
on reset framework which may not always be enabled.

Ensure the reset framework is also always enabled to prevent inobvious
early boot time bind failure of the CPG driver, which leads to system
showing no activity and is difficult to debug.

Note that one possible approach to debug this is to use CONFIG_DEBUG_UART
and add debug printascii()s into the drivers/clk/renesas/clk-rcar-gen3.c .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10 17:46:09 +01:00
Marek Vasut
f20a61af42 mmc: renesas-sdhi: Add proper probe error fail path
In case one of the calls in probe fail, trigger a fail path and
undo all the steps done in probe until the point of failure.
The current implementation failed to stop controller clock and
free claimed clock, so fix that. Furthermore, print return code
in error prints for easier debugging.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10 17:45:47 +01:00
Marek Vasut
6ddffa89cb mmc: renesas-sdhi: Always configure default SDnH clock rate to 800 MHz
The prior stage bootloader might have left the SDnCKCR register in completely
arbitrary state before passing control to U-Boot, which includes the register
being populated with incorrect values. Currently the SDHI driver will attempt
to use clock framework to configure SDn clock, which may fail in case SDnCKCR
contains invalid values for the SDnH clock, because the clock framework would
not be able to determine SDnH clock rate and would get -EINVAL instead, which
in turn would not allow the clock framework to determine the correct SDn clock
divider ratio.

This failure occurs specifically in case SDnCKCR reads back 0x209 .

Correct the problem by first setting default SDnH clock rate to 800 MHz, thus
assuring the SDnCKCR SDnH bits are correct, and only afterward set up the SDn
clock rate to default 200 MHz.

Note that the SDHI driver may reconfigure SDnH clock later based on IOS
settings obtained from the attached card, the 800 MHz set up here is only
the default value.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10 17:45:47 +01:00
Heinrich Schuchardt
4042ce73c8 usb: move CONFIG_USB_HUB_DEBOUNCE_TIMEOUT to USB
This configuration setting is only relevant if the board supports USB.
It should not be in the main menu but in the USB menu.

The setting is only relevant in USB host mode.

Fixes: 5454dea313 ("usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-03-10 17:31:31 +01:00
Heinrich Schuchardt
fe61da8c75 usb: USB hubs require host mode
USB hubs run in host mode not in gadget mode. Hence, compiling usb_hub.c
should not be selected by CONFIG_USB_GADGET.

Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-03-10 17:31:31 +01:00
Marek Vasut
aa89aebb17 test: cmd: fdt: Test fdt bootcpu
Add 'fdt bootcpu' test which works as follows:
- Create basic FDT, map it to sysmem
- Print the FDT bootcpu
- Set the FDT bootcpu and read the value back using 'fdt header get'
- Perform the previous step twice to validate bootcpu overwrite

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
caec1be706 test: cmd: fdt: Test fdt rm
Add 'fdt rm' test which works as follows:
- Create fuller FDT, map it to sysmem
- Selectively delete nodes or properties by both path and aliases
- Verify created nodes or properties using fdt print command

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
e7c7878455 test: cmd: fdt: Test fdt mknode
Add 'fdt mknode' test which works as follows:
- Create fuller FDT, map it to sysmem
- Create node either in / or subnode
- Attempt to create node over existing node, which fails
- Attempt to create subnodes in non-existing nodes or aliases
- Verify created nodes using fdt list command

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
a6bcd977f9 test: cmd: fdt: Test fdt set
Add 'fdt set' test which works as follows:
- Create fuller FDT, map it to sysmem
- Set either existing property to overwrite it, or new property
- Test setting both single properties as well as string and integer arrays
- Test setting to non-existent nodes and aliases
- Verify set values using 'fdt get value'

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
55d0f982f3 test: cmd: fdt: Test fdt get size
Add 'fdt get size' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get size of various properties
- Get node count of available nodes
- Test non-existent nodes and properties

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
1b025afca4 test: cmd: fdt: Test fdt get addr
Add 'fdt get addr' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get address of various properties
- Compare addresses calculated by UT and fdt command

This test is special in that it has to go through gruesome remapping scheme
where the test calculates:
- pointer offsets of the generated FDT root and the property being tested
- map_sysmem() result of environment variable "fdtaddr" and the one set
  by the test matching address of property being tested
- difference between the later and the former, to obtain offset of the
  DT property from start of DT
The offsets must match in both the UT and the tested U-Boot, if they do
not, the test fails.

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
4e22e12e3f test: cmd: fdt: Test fdt get name
Add 'fdt get name' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get name of / node 0, 1 and /clk-test node 0
- Compare output and validate the node name
- Get name of / node 2 and /clk-test node 1
- Compare output and validate the node is not present
- Get name of / node -1 and /clk-test node -1
- Compare output and validate the node name equals node 0 name
- Check nonexistent node, verify the command errors out

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
4efea813ef test: cmd: fdt: Test fdt resize
Add 'fdt resize' test which works as follows:
- Create simple FDT with extra size 0, map it to sysmem
- 'resize' the FDT by 0x2000 bytes
- Verify the new space has been added to the FDT

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
79bcd809f4 test: cmd: fdt: Test fdt move
Add 'fdt move' test which works as follows:
- Create simple FDT, map it to sysmem
- 'move' the FDT into new zeroed out sysmem location
- Verify newly active FDT is in the new location
- Compare both locations

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
e2d7daa6c9 test: cmd: fdt: Test both string and integer arrays in 'fdt get value'
The 'fdt get value' subcommand now supports extraction of integer value
from integer arrays, add test for it, including a test for special case
unindexed integer array read, which is handled as hash and treated as a
long string instead of integer.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
ed14576b59 test: cmd: fdt: Test alias resolution in 'fdt get value'
The 'fdt' command help contains the following note:
"
Dereference aliases by omitting the leading '/', e.g. fdt print ethernet0.
"
Add test for it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
21e1d93b14 test: cmd: fdt: Generate fuller DT internally and switch fdt get value to it
Implement function to generate internal test DT fragment and switch
the 'fdt get value' test to this instead of depending on the sandbox
DT. Rename clk-test node to test-node node. This FDT fragment will be
reused by other tests. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
38805e03f0 test: cmd: fdt: Rename fdt_test_get() to fdt_test_get_value()
The 'fdt get' command has a 'get value' subcommand, rename the fdt_test_get()
to fdt_test_get_value() to avoid confusion about what it is testing. There is
currently no get 'get name', 'get addr', 'get size' subcommand test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
4a9fe8cbe6 test: cmd: fdt: Rename fdt_test_resize() to fdt_test_addr_resize()
The 'fdt' command has a 'resize' subcommand, rename the fdt_test_resize()
to fdt_test_addr_resize() to avoid confusion about what it is testing.
There is currently no resize test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
967e7078b7 test: Add ut_assert_nextline_empty() empty line helper
Add helper macro to test for empty lines, which is an inobvious
wrapper around ut_assert_nextline("%s", "") .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
4e6d030550 cmd: fdt: Add support for integer arrays in fdt get value with index
Currently any integer array value is set as long up-to-40 character
hexadecimal string into environment variable when extracted from an
FDT using 'fdt get value path prop index', because the support for
handling integer arrays is not implemented, and fdt_value_env_set()
code falls back into the hash handling behavior instead.

Implement this support simply by checking whether user supplied any
index. If index is set and the property length is multiple of four,
then this is an integer array, and the code would extract value at
specified index.

There is a subtle change where default index is set to -1 instead of 0.
This is OK, since the only place which checks for index to be less or
equal zero is the string array handling code in fdt_value_env_set() and
that code would work perfectly well with index -1 too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
b363da1c26 cmd: fdt: Map address returned from fdt get addr to sysmem
The address returned from 'fdt get addr' command must be mapped
into sysmem, as this is a working FDT. Access to this address
without mapping it would lead to crash e.g. in sandbox.

The following command triggers the crash:
"
./u-boot -Dc 'fdt addr $fdtcontroladdr ; fdt get addr var / compatible ; md $var'
"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
98d114e75c cmd: fdt: Handle 64bit pointers in fdt get addr
The command assumed 32bit pointers so far, with 64bit pointer the
command would overwrite a piece of stack. Fix it by extending the
array size to cater for 64bit pointer, and use snprintf() to avoid
writing past the end of the array ever again.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00