Commit graph

125 commits

Author SHA1 Message Date
Simon Glass
57f0bc428a dtoc: Update tests to write failures to /tmp
When a test fails due to an output mismatch (e.g. due to a new property
being adding to a test file) it is currently hard to update the test to
the new output. In particular the tabs in the file are written as \t in
the Python tests.

To make this easier, write both the expected and actual results to /tmp
to allow use of meld, and copying into the test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
2ba9875312 dtoc: Add some tests for the fdt module
At present this module is tested via the dtoc tests. This is a bit painful
since the tests are at a higher level and so failures are more difficult
to diagnose.

Add some tests that exercise the fdt module directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
3def0cf238 libfdt: Bring in proposed pylibfdt changes
This provides various patches sent to the devicetree-compiler mailing list
to enhance the Python bindings. A final version of this patch may be
created once upstreaming is complete, but if it takes too long, this can
act as a placeholder.

New pylibfdt features:
- Support for most remaining, relevant libfdt functions
- Support for sequential-write functions

Changes are applied to existing U-Boot tools as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Masahiro Yamada
94b13bbae9 host-tools: use python2 explicitly for shebang
All of these host tools are apparently written for Python2,
not Python3.

Use 'python2' in the shebang line according to PEP 394
(https://www.python.org/dev/peps/pep-0394/).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28 12:27:30 -05:00
Simon Glass
3ed0de31b4 dtoc: Allow DTC environment variable to provide path to dtc
The system device-tree compiler may not be new enough to run the tests we
use in U-Boot (e.g. with binman). Allow use of a DTC environment variable
to point to the correct dtc. If not defined, the dtc on the default PATH
is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
aab660fe18 dtoc: Fix up tests
The tool has changed slightly since it was originally written. Update the
tests to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
d09682ef8c binman: Disable the no-unit_address_vs_reg warnings
These warnings are not useful for binman tests. Disable them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
d503114c66 dtoc: Add a header to the generated files
Add a header that indicates that the files generated by dtoc should not be
modified.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
634eba4be0 dtoc: Support properties containing multiple phandle values
At present dtoc has a very simplistic view of phandles. It assumes that
a property has only a single phandle with a single argument (i.e. two
cells per property).

This is not true in many cases. Enhance the implementation to scan all
phandles in a property and to use the correct number of arguments (which
can be 0, 1, 2 or more) when generating the C code. For the struct
definitions, use a struct which can hold the maximum number of arguments
used by the property.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
bc79617fdf dtoc: Put phandle args in an array
We want to support more than one phandle argument. It makes sense to use
an array for this rather than discrete struct members. Adjust the code to
support this. Rename the member to 'arg' instead of 'id'.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
35d503700f dtoc: Put each phandle on a separate line
When writing values from properties which contain phandles, dtoc currently
writes 8 phandles per line. Change this to write one phandle per line.
This helps reduce line length, since phandles are generally longer and may
have arguments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
0d15463c05 dtoc: Rename the phandle struct
Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g. struct phandle_1_arg). This is a more intuitive
naming.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
8fed2eb20c dtoc: Rename is_phandle() and adjust it to return more detail
Update this function to return more detail about a property that contains
phandles. This will allow (in a future commit) more accurate handling of
these properties.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
2925c26bb2 dtoc: Make is_phandle() a member function
This function will need to have access to class members once we enhance it
to support multiple phandle values. In preparation for that, move it into
the class.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
72ab7c5e38 dtoc: Use the Fdt's class's phandle map
Now that the Fdt class can map phandles to the associated nodes, use that
instead of a separate implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
09264e0433 dtoc: Update the Fdt class to record phandles
Add a map from phandles to nodes. This can be used by clients of the the
class instead of maintaining this themselves.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
5ec741fd84 dtoc: Handle 'reg' properties with unusual sizes
At present dtoc assumes that all 'reg' properties have both an address and
a size. For I2C devices we do not have this. Adjust dtoc to cope.

Reported-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
c20ee0ed07 dtoc: Add support for 32 or 64-bit addresses
When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.

Update the tool to use fdt64_t as the element type for reg properties when
either the address or size is larger than one cell. Use the correct value
so that C code can obtain the information from the device tree easily.

Alos create a new type, fdt_val_t, which is defined to either fdt32_t or
fdt64_t depending on the word size of the machine. This type corresponds
to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types
since they are defined to phys_addr_t and phys_size_t which use
'unsigned long' in the 32-bit case, rather than 'unsigned int'.

Add tests for the four combinations of address and size values (32/32,
64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368
which now need to use the new fdt_val_t type.

Signed-off-by: Simon Glass <sjg@chromium.org>

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:38 -06:00
Simon Glass
21d54ac353 dtoc: Avoid very long lines in output
Large arrays can result in lines with hundreds or thousands of characters
which is not very editor-friendly. To avoid this, addjust the tool to
group values 8 per line.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:24:39 -06:00
Simon Glass
fbdfd228fb dtoc: Add a 64-bit type and a way to convert cells into 64 bits
When dealing with multi-cell values we need a type that can hold this
value. Add this and a function to process it from a list of cell values.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:24:39 -06:00
Simon Glass
979ab02473 dtoc: Adjust Node to record its parent
We need to be able to search back up the tree for #address-cells and
 #size-cells. Record the parent of each node to make this easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:24:39 -06:00
Anatolij Gustschin
f1a7ba1da5 Fix 'notes' typos
s/notes/nodes

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-20 09:54:34 -04:00
Simon Glass
c07919281c dtoc: Add tests
Add some tests of dtoc's functionality to make it easier to expand and
enhance the tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
30107b08d7 dtoc: Add a comment about string replace in conv_name_to_c()
This function uses several separate string replaces where a regular
expression might seem more reasonable. Add a comment justifying the way it
is currently done.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
fa0ea5b09e dtoc: Move the main logic into the dtb_platdata file
Collect the main logic of dtoc into a function and put it into
dtb_platdata. This will allow tests to use this function instead of
duplicating the code themselves.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
56e0bbe057 dtoc: Move static functions out of the class
Rather than using static functions within the class, move them out of the
class. This will make it slightly easier for tests to call them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
e36024b05f dtoc: Pass include_disabled explicitly
This option is the only one actually used by the dtb_platdata class. Pass
it explicitly to avoid needing to pass the whole option object to the
constructor.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
86290ce40e dtoc: Don't handle properties with / in them
This conversion appears to not be needed as it does not occur in practice.
Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
2be282ca01 dtoc: Fix pylint warnings
Unfortunately I neglected to run pylint on this tool with its initial
submission. Fix the warnings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
7581c01a15 dtoc: Split out the main class into its own file
To simplify running tests we should move this class into its own file.
This allows the tests to import it without having to import dtoc.py, which
runs the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
14f5acfc5b dtoc: Add a comment at the top
Add a description of the dtoc tool at the top of the file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
418355cbaa dtoc: Use self._options instead of the global options
This class should use the options object passed to it rather than finding
the global one. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Simon Glass
2cce586651 dtoc: Support multiple compatible strings in a node
Sometimes a node will have multiple compatible strings. Drivers may use
one or the other so the best approach seems to be to #define them to be
equivalent.

Update dtoc to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-07-11 10:08:19 -06:00
Simon Glass
99ed4a2e97 fdt: Drop fdt_select.py
This file was used to select between the normal and fallback libfdt
implementations. Now that we only have one, it is not needed.

Drop it and fix up all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:18:20 -06:00
Simon Glass
7b75b4482d fdt: Merge fdt_normal with its base class
Since we only have one Fdt implementation now we don't need to have a base
class. Merge the implementation and the base class together.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:18:20 -06:00
Simon Glass
160a766425 fdt: Drop fdt_fallback library
Drop this now-unused library and associated tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:18:20 -06:00
Simon Glass
6d804eafc1 fdt: Drop use of the legacy libfdt python module
Now that this is no-longer available, stop looking for it. The new module
will be used if available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:18:19 -06:00
Simon Glass
b4360206a4 fdt: Support use of the new python libfdt library
Use the new library if available, while retaining backwards compatibility
with the old library for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:16:48 -06:00
Simon Glass
555ba4889c fdt: Rename existing python libfdt module
Now that this module has been accepted upstream we should stop using the
local U-Boot one. In preparation for this, rename it to indicate it is for
legacy use.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-02 10:16:47 -06:00
Simon Glass
439c947f32 dtoc: Handle nodes with phandles that depend on the same
At present dtoc assumes that nodes which are phandles do not themselves
reference other phandle nodes. Unfortunately this is not necessarilly
true. As a result we can currently output C code which does not compile
because a node declaration can be referenced before it is declared.

Adjust the code to explicitly output all phandle nodes needed by node
before the node itself is output.

This fixes building with the latest rk3399-firefly.dts from Linux, which
has reordered the nodes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-05-10 13:37:21 -06:00
Simon Glass
49eec8c7f1 dtoc: Move the output code into its own function
The code to generate the tables is quite long. Move the node-output code
into its own function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-05-10 13:37:21 -06:00
George McCollister
f156b5b597 dtoc: Decode val if it's a byte string
With Python 3.5.2 encode will throw an exception if val is a byte array.
Decode it to a string first. This assumes it's utf-8, if it's not valid
utf-8 it will throw an exception.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-13 11:43:49 -06:00
Philipp Tomsich
55bc080e79 dtoc: make ScanTree recurse into subnodes
Previously, dtoc could only process the top-level nodes which led to
device nodes in hierarchical trees to be ignored. E.g. the mmc0 node
in the following example would be ignored, as only the soc node was
processed:

  / {
	soc {
		mmc0 {
			/* ... */
		};
	};
  };

This introduces a recursive helper method ScanNode, which is used by
ScanTree to recursively parse the entire tree hierarchy.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-22 07:27:19 -06:00
Heiko Stübner
27326c7ee2 dm: allow limiting pre-reloc markings to spl or tpl
Right now the u-boot,dm-pre-reloc flag will make each marked node
always appear in both spl and tpl. But systems needing an additional
tpl might have special constraints for each, like the spl needing to
be very tiny.

So introduce two additional flags to mark nodes for only spl or tpl
environments and introduce a function dm_fdt_pre_reloc to automate
the necessary checks in code instances checking for pre-relocation
flags.

The behaviour of the original flag stays untouched and still marks
a node for both spl and tpl.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00
Simon Glass
6b6024a3a2 dtoc: Replace dot with underscore to avoid compiler errors
If there is a '.' in a compatible string, then dtoc will produce a struct
with a name containing a '.'. This won't work, so replace it with '_'.

Also add a suitable test to the sandbox device tree to catch this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:07:35 -07:00
Paul Burton
34c3889635 dtoc: Make integer division python 3.x safe
If we use the '/' operator then python 3.x will produce a float, and
refuse to multiply the string sequence in Conv_name_to_c by it with:

    TypeError: can't multiply sequence by non-int of type 'float'

Use the '//' operator instead to enforce that we want integer rather
than floating point division.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
c4c5f9eefb dtoc: Decode strings for struct.unpack on python 3.x
On python 3.x struct.unpack will complain if we provide it with a
string since it expects to operate on a bytes object. In order to
satisfy this requirement, encode the string to a bytes object when
running on python 3.x.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
4ae6549f8e dtoc: Use items() to iterate over dictionaries in python 3.x
In python 3.x the iteritems() method has been removed from dictionaries,
and the items() method does effectively the same thing. On python 2.x
using items() is a little less efficient since it involves copying data,
but as speed isn't a concern in the affected code switch to using
items() anyway for simplicity.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
3cb44ba80c dtoc: Add a way for tests to request the fallback library
We need to test both the normal (Python libfdt module) and fallback (fdtget)
implementations of the Fdt class. Add a way to select which implementation
to use.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
8828254cae dtoc: Adjust GetProps() in fdt_normal to use the node path
There is no need to pass a node path separately. Instead we should use the
path for the node provided. Correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
0734b70c9c dtoc: Fix bug in GetProp()
This does not actually call fdtget correctly when requesting a particular
type. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
8f224b3734 dtoc: Add methods for reading data from properties
Provide easy helpers for reading integer, string and boolean values from
device-tree properties.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
20024daee5 dtoc: Correct quotes in fdt_util
The style is to use single quotes for strings where possible. Adjust this
function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
babdbde68f dtoc: Support finding the offset of a property
Add a way to find the byte offset of a property within the device tree. This
is only supported with the normal libfdt implementation since fdtget does
not provide this information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
da5f74998b dtoc: Support packing the device tree
After any node/property deletion the device tree can be packed to remove
spare space. Add a way to perform this operation.

Note that for fdt_fallback, fdtput automatically packs the device tree after
deletion, so no action is required here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
2a70d897ed dtoc: Support deleting device tree properties
Add support for deleting a device tree property. With the fallback
implementation this uses fdtput. With libfdt it uses the API call and
updates the offsets afterwards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
0170804f60 dtoc: Move to using bytearray
Since we want to be able to change the in-memory device tree using libfdt,
use a bytearray instead of a string. This makes interfacing from Python
easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
346179f0d3 dtoc: Prepare for supporting changing of device trees
For binman we need to support deleting properties in the device tree. This
will change the offsets of nodes after the deletion. In preparation, add
code to keep track of when the offsets are invalid, and regenerate them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
6b93c55f59 dtoc: Drop the convert_dash parameter to GetProps()
This is not used anywhere in dtoc, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
355c67c35a dtoc: Allow the device tree to be compiled from source
If a source device tree is provide to the Fdt() constructors, compile it
automatically. This will be used in tests, where we want to build a
particular test .dts file and check that it works correctly in binman.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:39 -06:00
Simon Glass
f7a2aeeeb8 dtoc: Move a few more common functions into fdt.py
Some functions have the same code in the subclasses. Move these into the
superclass to avoid duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
c322a850af dtoc: Move Widen() and GetPhandle() into the base class
These functions are identical in both subclasses. Move them into the base
class.

Note: In fact there is a bug in one version, which was fixed by this patch:

https://patchwork.ozlabs.org/patch/651697/

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
bc1dea3656 dtoc: Move BytesToValue() and GetEmpty() into PropBase
These functions are currently in a separate fdt_util file. Since they are
only used from PropBase and subclasses, it makes sense for them to be in the
PropBase class.

Move these functions into fdt.py along with the list of types.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
a06a34b203 dtoc: Create a base class for Fdt
At present we have two separate implementations of the Fdt library, one which
uses fdtget/fdtput and one which uses libfdt (via swig).

Before adding more functionality it makes sense to create a base class for
these. This will allow common functions to be shared, and make the Fdt API
a little clearer.

Create a new fdt.py file with the base class, and adjust fdt_normal.py and
fdt_fallback.py to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
66051b1f59 dtoc: Rename fdt.py to fdt_normal.py
In preparation for creating an Fdt base class, rename this file to indicate
it is the normal Fdt implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
ba48258566 dtoc: Move the fdt library selection into fdt_select
Rather than have dtc worry about which fdt library to use, move this into
a helper file. Add a function which creates a new Fdt object and scans it,
regardless of the implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
5859311545 dtoc: Move the struct import into the correct order
This should be in with the other system includes. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
d6a33918fb dtoc: Correct the type widening code in fdt_fallback
This code does not match the fdt version in fdt.py. When dtoc is unable to
use the Python libfdt library, it uses the fallback version, which does not
widen arrays correctly.

Fix this to avoid a warning 'excess elements in array initialize' in
dt-platdata.c which happens on some platforms.

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:05:55 -04:00
Simon Glass
9fa2819009 dm: core: Expand platdata for of-platdata devices
Devices which use of-platdata have their own platdata. However, in many
cases the driver will have its own auto-alloced platdata, for use with the
device tree. The ofdata_to_platdata() method converts the device tree
settings to platdata.

With of-platdata we would not normally allocate the platdata since it is
provided by the U_BOOT_DEVICE() declaration. However this is inconvenient
since the of-platdata struct is closely tied to the device tree properties.
It is unlikely to exactly match the platdata needed by the driver.

In fact a useful approach is to declare platdata in the driver like this:

struct r3288_mmc_platdata {
	struct dtd_rockchip_rk3288_dw_mshc of_platdata;
	/* the 'normal' fields go here */
};

In this case we have dt_platadata available, but the normal fields are not
present, since ofdata_to_platdata() is never called. In fact driver model
doesn't allocate any space for the 'normal' fields, since it sees that there
is already platform data attached to the device.

To make this easier, adjust driver model to allocate the full size of the
struct (i.e. platdata_auto_alloc_size from the driver) and copy in the
of-platdata. This means that when the driver's bind() method is called,
the of-platdata will be present, followed by zero bytes for the empty
'normal field' portion.

A new DM_FLAG_OF_PLATDATA flag is available that indicates that the platdata
came from of-platdata. When the allocation/copy happens, the
DM_FLAG_ALLOC_PDATA flag will be set as well. The dtoc tool is updated to
output the platdata_size field, since U-Boot has no other way of knowing
the size of the of-platdata struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
efefe1221b dtoc: Ignore the u-boot, dm-pre-reloc property
This property is not useful for of-platdata, so omit it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
76bce10d21 dm: Add a more efficient libfdt library
Add a Python version of the libfdt library which contains enough features to
support the dtoc tool. This is only a very bare-bones implementation. It
requires the 'swig' to build.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
69f2ed7746 dm: Add a tool to generate C code from a device tree
This tool can produce C struct definitions and C platform data tables.
This is used to support the of-platdata feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
ec564b47da dm: Add a library to provide simple device-tree access
This Python library provides a way to access the contents of the device
tree. It uses fdtget, so is inefficient for larger device tree files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00