Commit graph

15 commits

Author SHA1 Message Date
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Wolfgang Denk
98b742489c inka4x0: remove dead code
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-25 09:56:17 +01:00
Marian Balakowicz
5fb6d7191e [INKA4x0] NG hardware: SDRAM support
Add support for three new DDR chips that may  be present on a NG
INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.

Cleanup board/inka4x0/mt48lc16m16a2-75.h file.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-15 13:29:55 +01:00
Marian Balakowicz
f23cb34c36 [INKA4x0] NG hardware: platform code update
- Cleanup compile warnings.
- Add missing '\0' in default environment.
- Increase CFG_MONITOR_LEN to 256 KiB.
- Add required CFG_USE_PPCENV.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-15 13:24:43 +01:00
Jon Loeliger
77a318545d board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:39:10 -05:00
Bartlomiej Sieka
dae80f3caf - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
  Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
  MPC5XXX_WU_GPIO_DATA_O for affected boards.

- Add defintions for some MPC5XXX GPIO pins.
2006-11-01 01:38:16 +01:00
wdenk
342717f72a * Fix baudrate calculation problem on MPC5200 systems
* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
a0bdf49e39 INKA4x0: Allow initialization of LCD backlight dimming from
"brightness" environment variable.
2005-03-14 13:14:58 +00:00
wdenk
f4733a0764 Add port initialization for digital I/O on INKA4x0 2005-03-06 01:21:30 +00:00
wdenk
b05dcb58fe * Fix get_partition_info() parameter error in all other calls
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

* Patch by Andrew Dyer, 28 February 2005:
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0
2005-03-04 11:27:31 +00:00
wdenk
151ab83a93 * Add support for ext2 filesystems and image timestamps to TQM5200 board
* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver
2005-02-24 22:44:16 +00:00
wdenk
436be29cad * Update CPC45 board configuration.
* Add USB and PCI support for INKA4x0 board
2005-01-31 22:09:11 +00:00
wdenk
08f272787a * Fix problems with CMC_PU2 flash driver.
* Adjust INKA 4x0 default settings
2004-12-19 21:39:27 +00:00
wdenk
efe2a4d5cf Code cleanup. 2004-12-16 21:44:03 +00:00
wdenk
138ff60c1e Add support for INKA4X0 board 2004-12-16 15:52:40 +00:00