As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to prevent crashing due to infinite recursion and actually
decompress the requested data, call the zlib function 'uncompress'
instead.
Signed-off-by: WHR <msl0000023508@gmail.com>
Currently no features are implemented, only the zpool version 5000 that
indicating the features support, is recognized. Since it is possible for
OpenZFS to create a pool with features support enabled, but without
enabling any actual feature, this change enables U-Boot to read such
pools.
Signed-off-by: WHR <msl0000023508@gmail.com>
Without this patch, the while loop being modified goes on infinitely,
but with the patch I am able to boot linux on zfs on a jetson tx2 nx.
It seems like this code was never tested because the logic is clearly
wrong. The function do_div(a,b) does a division that modifies the first
parameter to have a = a / b, and returns the remainder of the division.
So clearly in the usual case when file->offset = 0, the line
"blkid = do_div(blkid, blksz);" just results in blkid being set to zero
on every iteration of the loop, rather than being incremented as blocks
are read. Hence the zeroth block is read over and over and this becomes
an infinite loop.
So instead capture the remainder of the division in a "blkoff" variable,
and use that to properly calculate the memory address to move from in
memmove() below.
For example, if file->offset were 1337, on the first iteration of the
loop blkid would be 0 and blkoff would be 1337. If the blksz is 131072
(as it was for me), that amount of data would be copied into
data->file_buf. movesize would be 131072 - 1337 = 129735 so 129735 bytes
would be moved into buf. On the second iteration of the loop (assuming
there is one), red would be 129735, blkid would be 1, blkoff would be 0,
and 131072 bytes would be copied into buf. And so on...
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
As evidenced by how other filesystems handle it, a return value of 0
from fs_devread() means failure; nonzero means success. The opposite
assumption was being made in zfs.c for the use of zfs_devread() so fix
the confusion by making zfs_devread() return 0 on success.
It probably doesn't make sense to change the handling of zfs_devread()
in zfs.c instead, because as it is it matches the semantics of the other
functions there.
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
Without this patch, when trying to boot zfs using U-Boot on a Jetson TX2
NX (which is aarch64), I get a CPU reset error like so:
"Synchronous Abort" handler, esr 0x96000021
elr: 00000000800c9000 lr : 00000000800c8ffc (reloc)
elr: 00000000fff77000 lr : 00000000fff76ffc
x0 : 00000000ffb40f04 x1 : 0000000000000000
x2 : 000000000000000a x3 : 0000000003100000
x4 : 0000000003100000 x5 : 0000000000000034
x6 : 00000000fff9cc6e x7 : 000000000000000f
x8 : 00000000ff7f84a0 x9 : 0000000000000008
x10: 00000000ffb40f04 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000000001
x14: 00000000ff7f84bc x15: 0000000000000010
x16: 0000000000002080 x17: 00000000001fffff
x18: 00000000ff7fbdd8 x19: 00000000ffb405f8
x20: 00000000ffb40dd0 x21: 00000000fffabe5e
x22: 000000ea77940000 x23: 00000000ffb42090
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000bab10c x29: 00000000ff7f85f0
Code: d00001a0 9103a000 94006ac6 f9401ba0 (f9400000)
Resetting CPU ...
This happens when be64_to_cpu() is called on a value that exists at a
memory address that's 4 byte aligned but not 8 byte aligned (e.g. an
address ending in 04). The call stack where that happens is:
check_pool_label() ->
zfs_nvlist_lookup_uint64(vdevnvlist, ZPOOL_CONFIG_ASHIFT,...) ->
be64_to_cpu()
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
Fixes: 4d3c95f5ea ("zfs: Add ZFS filesystem support")
This code was hitting the error code path whenever malloc() succeeded
rather than when it failed, so presumably this part of the code hasn't
been tested. I had to apply this fix (and others) to get U-Boot to boot
from ZFS on an Nvidia Jetson TX2 NX SoM (an aarch64 computer).
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.
Signed-off-by: Simon Glass <sjg@chromium.org>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
The ext4, reiserfs and zfs filesystems all have their own implementation
of the same function, *_devread. Generalize this function into fs_devread
and put the code into fs/fs_internal.c.
Signed-off-by: Marek Behun <marek.behun@nic.cz>
[trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all
cases need it]
Signed-off-by: Tom Rini <trini@konsulko.com>
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
In a message from Wolfgang Denk highlighting warnings from cppcheck,
the patch will address those that are correctly diagnosed. Some are
false-positives:
> [fs/zfs/zfs.c:937]: (error) Memory leak: l
dmu_read() allocates "l" if successful, so error-case should not free
it.
> [fs/zfs/zfs.c:1141]: (error) Memory leak: dnbuf
dmu_read() allocates "dnbuf" if successful, so error-case should not
free it.
> [fs/zfs/zfs.c:1372]: (error) Memory leak: osp
zio_read() allocates "osp" if successful, so error-case should
not free it.
> [fs/zfs/zfs.c:1726]: (error) Memory leak: nvlist
int_zfs_fetch_nvlist() allocates "nvlist" if successful, so error-case
should not free it.
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
the upcoming sunxi (allwinner a10/a13) platform enables zfs
by default, and using linaro's hf -msoft-float makes the build
fail because this u64 division.
Signed-off-by: Alejandro Mery <amery@geeks.cl>
Acked-by: Stefan Roese <sr@denx.de>
This patch fixes the following compile warning:
zfs.c:2006:1: warning: 'zfs_label' defined but not used [-Wunused-function]
zfs.c:2029:1: warning: 'zfs_uuid' defined but not used [-Wunused-function]
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jorgen Lundman <lundman@lundman.net>
Convert zfsload and zfsls to use common device and partition parsing
function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
U-Boot port is based on sources forked from GRUB-0.97 by Sun in 2004,
which can be found here:
http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/grub/grub-0.97/stage2/zfs-include/zfs.h
Released by Sun for GRUB under the license:
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
GRUB official releases include ZFS in version:
ftp://alpha.gnu.org/gnu/grub/grub-1.99~rc1.tar.gz
And patched against GRUB Bazaar repository for ashift fixes (4KB HDDs)
more conveniently found at github:
e7b6ef3ac3
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
