board: puma: Use rockchip_* helpers to setup cpuid and macaddr

We should use the shared helpers to setup the necessary parts

Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Rohan Garg 2019-08-12 17:04:36 +02:00 committed by Kever Yang
parent 015c3fbad9
commit fa177ff020

View file

@ -18,97 +18,10 @@
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/misc.h>
#include <power/regulator.h>
#include <u-boot/sha256.h>
static void setup_macaddr(void)
{
#if CONFIG_IS_ENABLED(CMD_NET)
int ret;
const char *cpuid = env_get("cpuid#");
u8 hash[SHA256_SUM_LEN];
int size = sizeof(hash);
u8 mac_addr[6];
/* Only generate a MAC address, if none is set in the environment */
if (env_get("ethaddr"))
return;
if (!cpuid) {
debug("%s: could not retrieve 'cpuid#'\n", __func__);
return;
}
ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
if (ret) {
debug("%s: failed to calculate SHA256\n", __func__);
return;
}
/* Copy 6 bytes of the hash to base the MAC address on */
memcpy(mac_addr, hash, 6);
/* Make this a valid MAC address and set it */
mac_addr[0] &= 0xfe; /* clear multicast bit */
mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
eth_env_set_enetaddr("ethaddr", mac_addr);
#endif
}
static void setup_serial(void)
{
#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
const u32 cpuid_offset = 0x7;
const u32 cpuid_length = 0x10;
struct udevice *dev;
int ret, i;
u8 cpuid[cpuid_length];
u8 low[cpuid_length/2], high[cpuid_length/2];
char cpuid_str[cpuid_length * 2 + 1];
u64 serialno;
char serialno_str[17];
/* retrieve the device */
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_GET_DRIVER(rockchip_efuse), &dev);
if (ret) {
debug("%s: could not find efuse device\n", __func__);
return;
}
/* read the cpu_id range from the efuses */
ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
if (ret) {
debug("%s: reading cpuid from the efuses failed\n",
__func__);
return;
}
memset(cpuid_str, 0, sizeof(cpuid_str));
for (i = 0; i < 16; i++)
sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
debug("cpuid: %s\n", cpuid_str);
/*
* Mix the cpuid bytes using the same rules as in
* ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
*/
for (i = 0; i < 8; i++) {
low[i] = cpuid[1 + (i << 1)];
high[i] = cpuid[i << 1];
}
serialno = crc32_no_comp(0, low, 8);
serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
env_set("cpuid#", cpuid_str);
env_set("serial#", serialno_str);
#endif
}
static void setup_iodomain(void)
{
const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
@ -198,8 +111,23 @@ static int setup_boottargets(void)
int misc_init_r(void)
{
setup_serial();
setup_macaddr();
const u32 cpuid_offset = 0x7;
const u32 cpuid_length = 0x10;
u8 cpuid[cpuid_length];
int ret;
ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
if (ret)
return ret;
ret = rockchip_cpuid_set(cpuid, cpuid_length);
if (ret)
return ret;
ret = rockchip_setup_macaddr();
if (ret)
return ret;
setup_iodomain();
setup_boottargets();