t2080qds/ramboot: enable PBL tool for t2080qds

Add the default RCW(SerDes 0x66_0x16) and PBI configure file for
T2080QDS board, so we can use PBL tool to generate the ramboot
image to support boot from NAND/SPI/SD.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
This commit is contained in:
Shengzhou Liu 2013-11-22 17:39:12 +08:00 committed by York Sun
parent c4d0e81156
commit f7f155e1e1
4 changed files with 55 additions and 0 deletions

View file

@ -0,0 +1,41 @@
#
# Copyright 2013 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
# Refer doc/README.pblimage for more details about how-to configure
# and create PBL boot image
#
#PBI commands
#Initialize CPC1
09010000 00200400
09138000 00000000
091380c0 00000100
#512KB SRAM
09010100 00000000
09010104 fff80009
09010f00 08000000
#enable CPC1
09010000 80000000
#Configure LAW for CPC1
09000d00 00000000
09000d04 fff80000
09000d08 81000012
#Initialize eSPI controller, default configuration is slow for eSPI to
#load data, this configuration comes from u-boot eSPI driver.
09110000 80000403
09110020 2d170008
09110024 00100008
09110028 00100008
0911002c 00100008
#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
094fc030 00008148
094fd030 00008148
#Configure alternate space
09000010 00000000
09000014 ff000000
09000018 81000000
#Flush PBL data
09138000 00000000
091380c0 00000000

View file

@ -0,0 +1,8 @@
#PBL preamble and RCW header
aa55aa55 010e0100
#SerDes Protocol: 0x66_0x16
#Core/DDR: 1533Mhz/2133MT/s
12100017 15000000 00000000 00000000
66160002 00008400 e8104000 c1000000
00000000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004

View file

@ -966,6 +966,10 @@ Active powerpc mpc85xx - freescale t1040qds
Active powerpc mpc85xx - freescale t104xrdb T1040RDB T1040RDB:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com>
Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T1042RDB_PI:PPC_T1042 Poonam Aggrwal <poonam.aggrwal@freescale.com>
Active powerpc mpc85xx - freescale t2080qds T2080QDS T2080QDS:PPC_T2080
Active powerpc mpc85xx - freescale t2080qds T2080QDS_SDCARD T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
Active powerpc mpc85xx - freescale t2080qds T2080QDS_SPIFLASH T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
Active powerpc mpc85xx - freescale t2080qds T2080QDS_NAND T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
Active powerpc mpc85xx - freescale t2080qds T2080QDS_SRIO_PCIE_BOOT T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach@gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de>

View file

@ -45,6 +45,8 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
#endif
#define CONFIG_SRIO_PCIE_BOOT_MASTER