sunxi: power: Change A23/A33 VDD-SYS default from 1.2V to 1.1V

Change the axp223 dcdc2 / VDD-SYS default from 1.2V to 1.1V, 1.1V is the
value recommended by Allwinner and is what most fex files specify.

This has been tested on a number of A23/A33 tablets including on an
A23 Ippo-q8h-v1.2 PCB tablet which has a fex file which specifies 1.2V
(which is where our original 1.2V default comes from).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
This commit is contained in:
Hans de Goede 2015-10-03 15:21:53 +02:00
parent 6944aff1ca
commit f339f09c47
2 changed files with 3 additions and 3 deletions

View file

@ -20,7 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_AXP_DCDC2_VOLT=1100
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_ALDO1_VOLT=3000
CONFIG_USB_MUSB_HOST=y

View file

@ -53,13 +53,14 @@ config AXP_DCDC2_VOLT
int "axp pmic dcdc2 voltage"
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
default 1400 if AXP152_POWER || AXP209_POWER
default 1200 if MACH_SUN6I || MACH_SUN8I
default 1200 if MACH_SUN6I
default 1100 if MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
disable dcdc2.
On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.2V.
On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
config AXP_DCDC3_VOLT
int "axp pmic dcdc3 voltage"