Merge git://git.denx.de/u-boot-fsl-qoriq

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -3,6 +3,8 @@ config ARCH_LS1012A
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873
 	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_MMDC
 	select SYS_FSL_ERRATUM_A010315
@@ -19,6 +21,8 @@ config ARCH_LS1043A
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873
 	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
@@ -45,6 +49,8 @@ config ARCH_LS1046A
 	bool
 	select ARMV8_SET_SMPEN
 	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
@@ -72,6 +78,8 @@ config ARCH_LS1088A
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873
 	select FSL_LSCH3
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_LE
 	select SYS_FSL_DDR_VER_50
@@ -105,6 +113,8 @@ config ARCH_LS2080A
 	select ARM_ERRATA_829520
 	select ARM_ERRATA_833471
 	select FSL_LSCH3
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_LE
 	select SYS_FSL_DDR_VER_50
@@ -142,13 +152,9 @@ config FSL_LSCH2
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_BE
-	select SYS_FSL_SRDS_1
-	select SYS_HAS_SERDES
 
 config FSL_LSCH3
 	bool
-	select SYS_FSL_SRDS_1
-	select SYS_HAS_SERDES
 
 config FSL_MC_ENET
 	bool "Management Complex network"

arch/powerpc/include/asm/config.h

@@ -70,11 +70,9 @@
 #endif
 
 /* The TSEC driver uses the PHYLIB infrastructure */
-#ifndef CONFIG_PHYLIB
-#if defined(CONFIG_TSEC_ENET)
+#if defined(CONFIG_TSEC_ENET) && defined(CONFIG_PHYLIB)
 #include <config_phylib_all_drivers.h>
 #endif /* TSEC_ENET */
-#endif /* !CONFIG_PHYLIB */
 
 /* The FMAN driver uses the PHYLIB infrastructure */
 

configs/ls1012ardb_qspi_SECURE_BOOT_defconfig

@@ -3,7 +3,9 @@ CONFIG_TARGET_LS1012ARDB=y
 CONFIG_SYS_TEXT_BASE=0x40100000
 CONFIG_SECURE_BOOT=y
 CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -13,7 +15,7 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
-CONFIG_HUSH_PARSER=y
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -21,16 +23,12 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_NETDEVICES=y
@@ -43,6 +41,7 @@ CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y

configs/ls1046aqds_lpuart_defconfig

@@ -19,6 +19,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
@@ -35,6 +36,12 @@ CONFIG_FSL_CAAM=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_DM_SPI=y

configs/ls1088aqds_qspi_SECURE_BOOT_defconfig

@@ -3,6 +3,7 @@ CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
 CONFIG_SECURE_BOOT=y
 CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y

configs/ls1088aqds_qspi_defconfig

@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
 CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y

configs/ls1088ardb_qspi_SECURE_BOOT_defconfig

@@ -33,6 +33,7 @@ CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y

configs/ls1088ardb_qspi_defconfig

@@ -33,6 +33,7 @@ CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y

drivers/crypto/fsl/jobdesc.c

@@ -257,7 +257,7 @@ void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr,
  * Descriptor to instantiate RNG State Handle 0 in normal mode and
  * load the JDKEK, TDKEK and TDSK registers
  */
-void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc)
+void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc, int handle)
 {
 	u32 *jump_cmd;
 
@@ -265,21 +265,24 @@ void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc)
 
 	/* INIT RNG in non-test mode */
 	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
-			 OP_ALG_AS_INIT);
+			(handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT);
 
-	/* wait for done */
-	jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
-	set_jump_tgt_here(desc, jump_cmd);
+	/* For SH0, Secure Keys must be generated as well */
+	if (handle == 0) {
+		/* wait for done */
+		jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
+		set_jump_tgt_here(desc, jump_cmd);
 
-	/*
-	 * load 1 to clear written reg:
-	 * resets the done interrrupt and returns the RNG to idle.
-	 */
-	append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+		/*
+		 * load 1 to clear written reg:
+		 * resets the done interrupt and returns the RNG to idle.
+		 */
+		append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
 
-	/* generate secure keys (non-test) */
-	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
-			 OP_ALG_RNG4_SK);
+		/* generate secure keys (non-test) */
+		append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+				OP_ALG_RNG4_SK);
+	}
 }
 
 /* Change key size to bytes form bits in calling function*/

drivers/crypto/fsl/jobdesc.h

@@ -40,7 +40,7 @@ void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr,
 				     uint8_t *enc_blob, uint8_t *plain_txt,
 				     uint32_t out_sz);
 
-void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc);
+void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc, int handle);
 
 void inline_cnstr_jobdesc_pkha_rsaexp(uint32_t *desc,
 				      struct pk_in_params *pkin, uint8_t *out,

drivers/crypto/fsl/jr.c

@@ -444,35 +444,49 @@ int sec_reset(void)
 #ifndef CONFIG_SPL_BUILD
 static int instantiate_rng(uint8_t sec_idx)
 {
-	struct result op;
 	u32 *desc;
 	u32 rdsta_val;
-	int ret = 0;
+	int ret = 0, sh_idx, size;
 	ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem *)SEC_ADDR(sec_idx);
 	struct rng4tst __iomem *rng =
 			(struct rng4tst __iomem *)&sec->rng;
 
-	memset(&op, 0, sizeof(struct result));
-
 	desc = memalign(ARCH_DMA_MINALIGN, sizeof(uint32_t) * 6);
 	if (!desc) {
 		printf("cannot allocate RNG init descriptor memory\n");
 		return -1;
 	}
 
-	inline_cnstr_jobdesc_rng_instantiation(desc);
-	int size = roundup(sizeof(uint32_t) * 6, ARCH_DMA_MINALIGN);
-	flush_dcache_range((unsigned long)desc,
-			   (unsigned long)desc + size);
+	for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+		/*
+		 * If the corresponding bit is set, this state handle
+		 * was initialized by somebody else, so it's left alone.
+		 */
+		rdsta_val = sec_in32(&rng->rdsta) & RNG_STATE_HANDLE_MASK;
+		if (rdsta_val & (1 << sh_idx))
+			continue;
 
-	ret = run_descriptor_jr_idx(desc, sec_idx);
+		inline_cnstr_jobdesc_rng_instantiation(desc, sh_idx);
+		size = roundup(sizeof(uint32_t) * 6, ARCH_DMA_MINALIGN);
+		flush_dcache_range((unsigned long)desc,
+				   (unsigned long)desc + size);
 
-	if (ret)
-		printf("RNG: Instantiation failed with error %x\n", ret);
+		ret = run_descriptor_jr_idx(desc, sec_idx);
 
-	rdsta_val = sec_in32(&rng->rdsta);
-	if (op.status || !(rdsta_val & RNG_STATE0_HANDLE_INSTANTIATED))
-		return -1;
+		if (ret)
+			printf("RNG: Instantiation failed with error 0x%x\n",
+			       ret);
+
+		rdsta_val = sec_in32(&rng->rdsta) & RNG_STATE_HANDLE_MASK;
+		if (!(rdsta_val & (1 << sh_idx))) {
+			free(desc);
+			return -1;
+		}
+
+		memset(desc, 0, sizeof(uint32_t) * 6);
+	}
+
+	free(desc);
 
 	return ret;
 }
@@ -524,14 +538,11 @@ static int rng_init(uint8_t sec_idx)
 	ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem *)SEC_ADDR(sec_idx);
 	struct rng4tst __iomem *rng =
 			(struct rng4tst __iomem *)&sec->rng;
-
-	u32 rdsta = sec_in32(&rng->rdsta);
-
-	/* Check if RNG state 0 handler is already instantiated */
-	if (rdsta & RNG_STATE0_HANDLE_INSTANTIATED)
-		return 0;
+	u32 inst_handles;
 
 	do {
+		inst_handles = sec_in32(&rng->rdsta) & RNG_STATE_HANDLE_MASK;
+
 		/*
 		 * If either of the SH's were instantiated by somebody else
 		 * then it is assumed that the entropy
@@ -540,8 +551,10 @@ static int rng_init(uint8_t sec_idx)
 		 * Also, if a handle was instantiated, do not change
 		 * the TRNG parameters.
 		 */
-		kick_trng(ent_delay, sec_idx);
-		ent_delay += 400;
+		if (!inst_handles) {
+			kick_trng(ent_delay, sec_idx);
+			ent_delay += 400;
+		}
 		/*
 		 * if instantiate_rng(...) fails, the loop will rerun
 		 * and the kick_trng(...) function will modfiy the

drivers/crypto/fsl/jr.h

@@ -41,6 +41,8 @@
 #define JQ_DEQ_TO_ERR		-2
 #define JQ_ENQ_ERR		-3
 
+#define RNG4_MAX_HANDLES	2
+
 struct op_ring {
 	phys_addr_t desc;
 	uint32_t status;

drivers/ddr/fsl/arm_ddr_gen3.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  *
  * Derived from mpc85xx_ddr_gen3.c, removed all workarounds
  */

drivers/ddr/fsl/ctrl_regs.c

@@ -2,7 +2,7 @@
  * Copyright 2008-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 /*

drivers/ddr/fsl/ddr1_dimm_params.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/ddr2_dimm_params.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/ddr3_dimm_params.c

@@ -6,7 +6,7 @@
  * from ddr3 spd, please refer to the spec
  * JEDEC standard No.21-C 4_01_02_11R18.pdf
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/ddr4_dimm_params.c

@@ -2,7 +2,7 @@
  * Copyright 2014-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  *
  * calculate the organization and timing parameter
  * from ddr3 spd, please refer to the spec

drivers/ddr/fsl/fsl_ddr_gen4.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/fsl_mmdc.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:     GPL-2.0+
+ * SPDX-License-Identifier:     GPL-2.0+	BSD-3-Clause
  */
 
 /*

drivers/ddr/fsl/interactive.c

@@ -2,7 +2,7 @@
  * Copyright 2010-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 /*

drivers/ddr/fsl/lc_common_dimm_params.c

@@ -2,7 +2,7 @@
  * Copyright 2008-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/main.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 /*

drivers/ddr/fsl/mpc85xx_ddr_gen1.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/mpc85xx_ddr_gen2.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/mpc85xx_ddr_gen3.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/mpc86xx_ddr.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/options.c

@@ -2,7 +2,7 @@
  * Copyright 2008, 2010-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 #include <common.h>

drivers/ddr/fsl/util.c

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #include <common.h>

include/common_timing_params.h

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #ifndef COMMON_TIMING_PARAMS_H

include/configs/ls1012ardb.h

@@ -63,16 +63,20 @@
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x800000\0"		\
 	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernel_addr_r=0x81000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
 	"scan_dev_for_boot_part="		\
 	     "part list ${devtype} ${devnum} devplist; "	\
 	     "env exists devplist || setenv devplist 1; "	\
@@ -90,15 +94,27 @@
 			"run scan_dev_for_scripts; "	  \
 		"done;"					  \
 		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
 
 #include <asm/fsl_secure_boot.h>
 

include/fsl_ddr.h

@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #ifndef FSL_DDR_MAIN_H

include/fsl_ddr_dimm_params.h

@@ -2,7 +2,7 @@
  * Copyright 2008-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2018 NXP Semiconductor
  *
- * SPDX-License-Identifier:	GPL-2.0
+ * SPDX-License-Identifier:	GPL-2.0	BSD-3-Clause
  */
 
 #ifndef DDR2_DIMM_PARAMS_H

include/fsl_ddrc_version.h

@@ -1,7 +1,7 @@
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 #ifndef __FSL_DDRC_VER_H

include/fsl_immap.h

@@ -3,7 +3,7 @@
  *
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 #ifndef __FSL_IMMAP_H

include/fsl_mmdc.h

@@ -1,7 +1,7 @@
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
  */
 
 #ifndef FSL_MMDC_H

include/fsl_sec.h

@@ -67,6 +67,9 @@ struct rng4tst {
 	};
 	u32 rsvd1[40];
 #define RNG_STATE0_HANDLE_INSTANTIATED	0x00000001
+#define RNG_STATE1_HANDLE_INSTANTIATED	0x00000002
+#define RNG_STATE_HANDLE_MASK	\
+	(RNG_STATE0_HANDLE_INSTANTIATED | RNG_STATE1_HANDLE_INSTANTIATED)
 	u32 rdsta;		/*RNG DRNG Status Register*/
 	u32 rsvd2[15];
 };