mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
power: pmic: add the base MAX77663 PMIC support
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This commit is contained in:
Svyatoslav Ryhel
Tom Rini
parent
9b1d277471
commit
f2ed584994
5 changed files with 217 additions and 0 deletions
84
doc/device-tree-bindings/pmic/max77663.txt
Normal file
84
doc/device-tree-bindings/pmic/max77663.txt
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
MAXIM, MAX77663 PMIC
|
||||
|
||||
This device uses two drivers:
|
||||
- drivers/power/pmic/max77663.c (for parent device)
|
||||
- drivers/power/regulator/max77663_regulator.c (for child regulators)
|
||||
|
||||
This chapter describes the binding info for the PMIC driver and regulators.
|
||||
|
||||
Required properties for PMIC:
|
||||
- compatible: "maxim,max77663"
|
||||
- reg: usually 0x1c or 0x3c
|
||||
|
||||
With those two properties, the pmic device can be used for read/write only.
|
||||
To bind each regulator, the optional regulators subnode should exists.
|
||||
|
||||
Optional subnode:
|
||||
- name: regulators (subnode list of each device's regulator)
|
||||
|
||||
Regulators subnode contains set on supported regulators.
|
||||
|
||||
Required properties:
|
||||
- regulator-name: used for regulator uclass platform data '.name',
|
||||
|
||||
List of supported regulator nodes names for max77663:
|
||||
- sd0, sd1, sd2, sd3, ldo0, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8
|
||||
|
||||
Optional:
|
||||
- regulator-min-microvolt: minimum allowed Voltage to set
|
||||
- regulator-max-microvolt: minimum allowed Voltage to set
|
||||
- regulator-always-on: regulator should be never disabled
|
||||
- regulator-boot-on: regulator should be enabled by the bootloader
|
||||
|
||||
Linux driver binding for this driver is compatible.
|
||||
|
||||
Example:
|
||||
|
||||
max77663@1c {
|
||||
compatible = "maxim,max77663";
|
||||
reg = <0x1c>;
|
||||
|
||||
regulators {
|
||||
sd0 {
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
ldo0 {
|
||||
regulator-name = "avdd_pll";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
ldo2 {
|
||||
regulator-name = "avdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo3 {
|
||||
regulator-name = "vdd_sdmmc3";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
ldo8 {
|
||||
regulator-name = "avdd_dsi_csi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -184,6 +184,15 @@ config SPL_DM_PMIC_PFUZE100
|
|||
This config enables implementation of driver-model pmic uclass features
|
||||
for PMIC PFUZE100 in SPL. The driver implements read/write operations.
|
||||
|
||||
config DM_PMIC_MAX77663
|
||||
bool "Enable Driver Model for PMIC MAX77663"
|
||||
---help---
|
||||
This config enables implementation of driver-model pmic uclass features
|
||||
for PMIC MAX77663. The driver implements read/write operations.
|
||||
This is a Power Management IC with a decent set of peripherals from which
|
||||
4 DC-to-DC Step-Down (SD) Regulators, 9 Low-Dropout Linear (LDO) Regulators,
|
||||
8 GPIOs, Real-Time Clock (RTC) and more with I2C Compatible Interface.
|
||||
|
||||
config DM_PMIC_MAX77686
|
||||
bool "Enable Driver Model for PMIC MAX77686"
|
||||
---help---
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@
|
|||
obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o
|
||||
obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o
|
||||
obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
|
||||
obj-$(CONFIG_$(SPL_)DM_PMIC_MAX77663) += max77663.o
|
||||
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
|
||||
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
|
||||
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
|
||||
|
|
|
|||
81
drivers/power/pmic/max77663.c
Normal file
81
drivers/power/pmic/max77663.c
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright(C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
|
||||
*/
|
||||
|
||||
#include <dm.h>
|
||||
#include <dm/lists.h>
|
||||
#include <power/pmic.h>
|
||||
#include <power/max77663.h>
|
||||
|
||||
static const struct pmic_child_info pmic_children_info[] = {
|
||||
{ .prefix = "ldo", .driver = MAX77663_LDO_DRIVER },
|
||||
{ .prefix = "sd", .driver = MAX77663_SD_DRIVER },
|
||||
{ },
|
||||
};
|
||||
|
||||
static int max77663_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
||||
int len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = dm_i2c_write(dev, reg, buff, len);
|
||||
if (ret) {
|
||||
log_debug("write error to device: %p register: %#x!\n", dev, reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max77663_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = dm_i2c_read(dev, reg, buff, len);
|
||||
if (ret) {
|
||||
log_debug("read error from device: %p register: %#x!\n", dev, reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max77663_bind(struct udevice *dev)
|
||||
{
|
||||
ofnode regulators_node;
|
||||
int children;
|
||||
|
||||
regulators_node = dev_read_subnode(dev, "regulators");
|
||||
if (!ofnode_valid(regulators_node)) {
|
||||
log_err("%s regulators subnode not found!\n", dev->name);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
|
||||
|
||||
children = pmic_bind_children(dev, regulators_node, pmic_children_info);
|
||||
if (!children)
|
||||
log_err("%s - no child found\n", dev->name);
|
||||
|
||||
/* Always return success for this device */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dm_pmic_ops max77663_ops = {
|
||||
.read = max77663_read,
|
||||
.write = max77663_write,
|
||||
};
|
||||
|
||||
static const struct udevice_id max77663_ids[] = {
|
||||
{ .compatible = "maxim,max77663" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(pmic_max77663) = {
|
||||
.name = "max77663_pmic",
|
||||
.id = UCLASS_PMIC,
|
||||
.of_match = max77663_ids,
|
||||
.bind = max77663_bind,
|
||||
.ops = &max77663_ops,
|
||||
};
|
||||
42
include/power/max77663.h
Normal file
42
include/power/max77663.h
Normal file
|
|
@ -0,0 +1,42 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright(C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef _MAX77663_H_
|
||||
#define _MAX77663_H_
|
||||
|
||||
#define MAX77663_LDO_NUM 9
|
||||
#define MAX77663_SD_NUM 5
|
||||
|
||||
/* Drivers name */
|
||||
#define MAX77663_LDO_DRIVER "max77663_ldo"
|
||||
#define MAX77663_SD_DRIVER "max77663_sd"
|
||||
|
||||
/* Step-Down (SD) Regulator calculations */
|
||||
#define SD_STATUS_MASK 0x30
|
||||
|
||||
#define SD0_VOLT_MAX_HEX 0x40
|
||||
#define SD1_VOLT_MAX_HEX 0x4c
|
||||
#define SD_VOLT_MAX_HEX 0xff
|
||||
#define SD_VOLT_MIN_HEX 0x02
|
||||
|
||||
#define SD0_VOLT_MAX 1400000
|
||||
#define SD1_VOLT_MAX 1550000
|
||||
#define SD_VOLT_MAX 3787500
|
||||
#define SD_VOLT_MIN 625000
|
||||
|
||||
#define SD_VOLT_BASE 600000
|
||||
|
||||
/* Low-Dropout Linear (LDO) Regulator calculations */
|
||||
#define LDO_STATUS_MASK 0xc0
|
||||
#define LDO_VOLT_MASK 0x3f
|
||||
#define LDO_VOLT_MAX_HEX 0x3f
|
||||
|
||||
#define LDO01_VOLT_MAX 2375000
|
||||
#define LDO4_VOLT_MAX 1587500
|
||||
#define LDO_VOLT_MAX 3950000
|
||||
|
||||
#define LDO_VOLT_BASE 800000
|
||||
|
||||
#endif /* _MAX77663_H_ */
|
||||
Loading…
Reference in a new issue