Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-24 13:43:28 +00:00
Code Issues Projects Releases Packages Wiki Activity

spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN

Browse source 
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This commit is contained in:
Andy Yan 2017-07-24 17:43:34 +08:00 committed by Philipp Tomsich
parent a1903c18db
commit f1896c45cb
13 changed files with 41 additions and 29 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Kconfig
View file

@ -95,6 +95,16 @@ config SYS_MALLOC_F_LEN
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in spl before relocation"
depends on SYS_MALLOC_F
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y

4
cmd/bdinfo.c
View file

@ -344,9 +344,9 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
#ifdef CONFIG_BOARD_TYPES
printf("Board Type = %ld\n", gd->board_type);
#endif
#ifdef CONFIG_SYS_MALLOC_F
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
CONFIG_SYS_MALLOC_F_LEN);
CONFIG_VAL(SYS_MALLOC_F_LEN));
#endif
if (gd->fdt_blob)
printf("fdt_blob = %p\n", gd->fdt_blob);

4
common/Makefile
View file

@ -139,9 +139,11 @@ obj-y += console.o
endif
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-y += dlmalloc.o
ifdef CONFIG_SYS_MALLOC_F_LEN
ifdef CONFIG_SYS_MALLOC_F
ifneq ($(CONFIG_$(SPL_)SYS_MALLOC_F_LEN),0)
obj-y += malloc_simple.o
endif
endif
obj-y += image.o
obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o

4
common/board_f.c
View file

@ -727,7 +727,7 @@ static int initf_bootstage(void)
static int initf_console_record(void)
{
#if defined(CONFIG_CONSOLE_RECORD) && defined(CONFIG_SYS_MALLOC_F_LEN)
#if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN)
return console_record_init();
#else
return 0;
@ -736,7 +736,7 @@ static int initf_console_record(void)
static int initf_dm(void)
{
#if defined(CONFIG_DM) && defined(CONFIG_SYS_MALLOC_F_LEN)
#if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN)
int ret;
bootstage_start(BOOTSTATE_ID_ACCUM_DM_F, "dm_f");

2
common/board_r.c
View file

@ -256,7 +256,7 @@ static int initr_malloc(void)
{
ulong malloc_start;
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif

12
common/dlmalloc.c
View file

@ -1254,7 +1254,7 @@ Void_t* mALLOc(bytes) size_t bytes;
INTERNAL_SIZE_T nb;
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return malloc_simple(bytes);
#endif
@ -1522,7 +1522,7 @@ void fREe(mem) Void_t* mem;
mchunkptr fwd; /* misc temp for linking */
int islr; /* track whether merging with last_remainder */
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* free() is a no-op - all the memory will be freed on relocation */
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return;
@ -1679,7 +1679,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
/* realloc of null is supposed to be same as malloc */
if (oldmem == NULL) return mALLOc(bytes);
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
/* This is harder to support and should not be needed */
panic("pre-reloc realloc() is not supported");
@ -2074,7 +2074,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size;
return NULL;
else
{
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
MALLOC_ZERO(mem, sz);
return mem;
@ -2375,9 +2375,9 @@ int mALLOPt(param_number, value) int param_number; int value;
int initf_malloc(void)
{
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
assert(gd->malloc_base); /* Set up by crt0.S */
gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
#endif

8
common/init/board_init.c
View file

@ -46,8 +46,8 @@ __weak void arch_setup_gd(struct global_data *gd_ptr)
ulong board_init_f_alloc_reserve(ulong top)
{
/* Reserve early malloc arena */
#if defined(CONFIG_SYS_MALLOC_F)
top -= CONFIG_SYS_MALLOC_F_LEN;
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
top -= CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
/* LAST : reserve GD (rounded up to a multiple of 16 bytes) */
top = rounddown(top-sizeof(struct global_data), 16);
@ -121,11 +121,11 @@ void board_init_f_init_reserve(ulong base)
* Use gd as it is now properly set for all architectures.
*/
#if defined(CONFIG_SYS_MALLOC_F)
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* go down one 'early malloc arena' */
gd->malloc_base = base;
/* next alloc will be higher by one 'early malloc arena' size */
base += CONFIG_SYS_MALLOC_F_LEN;
base += CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
}

8
common/spl/spl.c
View file

@ -220,12 +220,12 @@ static int spl_common_init(bool setup_malloc)
debug("spl_early_init()\n");
#if defined(CONFIG_SYS_MALLOC_F_LEN)
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (setup_malloc) {
#ifdef CONFIG_MALLOC_F_ADDR
gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
}
#endif
@ -419,7 +419,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
@ -486,7 +486,7 @@ ulong spl_relocate_stack_gd(void)
gd_t *new_gd;
ulong ptr = CONFIG_SPL_STACK_R_ADDR;
#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN
if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
gd->malloc_base = ptr;

8
drivers/core/Kconfig
View file

@ -16,10 +16,10 @@ config SPL_DM
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enable. See
CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
config TPL_DM
bool "Enable Driver Model for TPL"
@ -29,10 +29,10 @@ config TPL_DM
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enough. See
CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
Disable this for very small implementations.
config DM_WARN

4
drivers/serial/serial-uclass.c
View file

@ -23,8 +23,8 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
#ifndef CONFIG_SYS_MALLOC_F_LEN
#error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
#if !CONFIG_VAL(SYS_MALLOC_F_LEN)
#error "Serial is required before relocation - define CONFIG_$(SPL_)SYS_MALLOC_F_LEN to make this work"
#endif
static int serial_check_stdout(const void *blob, struct udevice **devp)

2
include/asm-generic/global_data.h
View file

@ -88,7 +88,7 @@ typedef struct global_data {
#endif
unsigned int timebase_h;
unsigned int timebase_l;
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
unsigned long malloc_base; /* base address of early malloc() */
unsigned long malloc_limit; /* limit address */
unsigned long malloc_ptr; /* current address */

2
lib/asm-offsets.c
View file

@ -28,7 +28,7 @@ int main(void)
DEFINE(GD_SIZE, sizeof(struct global_data));
DEFINE(GD_BD, offsetof(struct global_data, bd));
#ifdef CONFIG_SYS_MALLOC_F_LEN
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
#endif

2
lib/efi/efi_app.c
View file

@ -48,7 +48,7 @@ static efi_status_t setup_memory(struct efi_priv *priv)
return ret;
memset(gd, '\0', sizeof(*gd));
gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_SYS_MALLOC_F_LEN,
gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_VAL(SYS_MALLOC_F_LEN),
&ret);
if (!gd->malloc_base)
return ret;