Convert CONFIG_SPL_STACK to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-05-26 13:13:21 -04:00
parent eaf6ea6a1d
commit f113d7d303
605 changed files with 831 additions and 220 deletions

32
README
View file

@ -293,33 +293,6 @@ board_init_r():
SPL-specific notes:
- stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and
CONFIG_SPL_STACK_R_ADDR points into SDRAM
- preloader_console_init() can be called here - typically this is
done by selecting CONFIG_SPL_BOARD_INIT and then supplying a
spl_board_init() function containing this call
- loads U-Boot or (in falcon mode) Linux
Configuration Options:
----------------------
Configuration depends on the combination of board and CPU type; all
such information is kept in a configuration file
"include/configs/<board_name>.h".
Example: For a TQM823L module, all configuration settings are in
"include/configs/TQM823L.h".
Many of the options are named exactly as the corresponding Linux
kernel configuration options. The intention is to make it easier to
build a config tool - later.
- ARM Platform Bus Type(CCI):
CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which
provides full cache coherency between two clusters of multi-core
CPUs and I/O coherency for devices and I/O masters
CONFIG_SYS_FSL_HAS_CCI400
Defined For SoC that has cache coherent interconnect
@ -1659,9 +1632,6 @@ The following options need to be configured:
CONFIG_SPL_BSS_START_ADDR
Link address for the BSS within the SPL binary.
CONFIG_SPL_STACK
Adress of the start of the stack SPL will use
CONFIG_SPL_PANIC_ON_RAW_IMAGE
When defined, SPL will panic() if the image it has
loaded does not have a signature.
@ -1675,8 +1645,6 @@ The following options need to be configured:
CONFIG_SPL_RELOC_STACK
Adress of the start of the stack SPL will use after
relocation. If unspecified, this is equal to
CONFIG_SPL_STACK.
CONFIG_SYS_SPL_MALLOC_START
Starting address of the malloc pool used in SPL.
When this option is set the full malloc is used in SPL and

View file

@ -19,7 +19,7 @@ _start:
mts rslr, r8
#if defined(CONFIG_SPL_BUILD)
addi r1, r0, CONFIG_SPL_STACK_ADDR
addi r1, r0, CONFIG_SPL_STACK
#else
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
#endif

View file

@ -357,6 +357,24 @@ config TPL_SYS_MALLOC_SIMPLE
this will make the TPL binary smaller at the cost of more heap
usage as the *_simple malloc functions do not re-use free-ed mem.
config SPL_SHARES_INIT_SP_ADDR
bool "SPL and U-Boot use the same initial stack pointer location"
depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
default n if ARCH_SUNXI
default y
help
In many cases, we can use the same initial stack pointer address for
both SPL and U-Boot itself. If you need to specify a different address
however, say N here and then set a different value in CONFIG_SPL_STACK.
config SPL_STACK
hex "Initial stack pointer location"
depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
depends on !SPL_SHARES_INIT_SP_ADDR
help
Address of the start of the stack SPL will use before SDRAM is
initialized.
config SPL_STACK_R
bool "Enable SDRAM location for SPL stack"
help

View file

@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -9,6 +9,7 @@ CONFIG_MMC1_CD_PIN="PG13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -13,6 +13,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f

View file

@ -15,6 +15,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y

View file

@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
CONFIG_SPL_SPI_SUNXI=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y

View file

@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y

View file

@ -9,6 +9,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -11,6 +11,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -12,6 +12,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -12,6 +12,7 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -12,6 +12,7 @@ CONFIG_SATAPWR="PC3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_USB_MUSB_HOST=y

View file

@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -8,6 +8,7 @@ CONFIG_DRAM_EMR1=0
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -12,6 +12,7 @@ CONFIG_USB2_VBUS_PIN="PH23"
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -9,6 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y

View file

@ -10,6 +10,7 @@ CONFIG_MMC0_CD_PIN="PB4"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_ID_DET="PH8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y

View file

@ -11,6 +11,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_CHIP_DIP_SCAN=y
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y

View file

@ -5,6 +5,7 @@ CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
# CONFIG_CMD_FLASH is not set

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PM1"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -12,6 +12,7 @@ CONFIG_USB0_ID_DET="PH16"
CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
CONFIG_SPL_STACK=0x18000
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_SUN8I_RSB=y
CONFIG_AXP809_POWER=y

View file

@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -13,6 +13,7 @@ CONFIG_SATAPWR="PH12"
CONFIG_GMAC_TX_DELAY=1
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y

View file

@ -16,6 +16,7 @@ CONFIG_I2C0_ENABLE=y
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -9,6 +9,7 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -10,6 +10,7 @@ CONFIG_SATAPWR="PB3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -5,5 +5,6 @@ CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
# CONFIG_NETDEVICES is not set

View file

@ -10,6 +10,7 @@ CONFIG_SATAPWR="PH2"
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -8,6 +8,7 @@ CONFIG_DRAM_ZQ=122
CONFIG_SATAPWR="PH2"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN4I=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -5,6 +5,7 @@ CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -10,6 +10,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set

View file

@ -5,6 +5,7 @@ CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -8,6 +8,7 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -8,6 +8,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -9,6 +9,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -9,6 +9,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -12,6 +12,7 @@ CONFIG_USB0_ID_DET="PH3"
CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
CONFIG_SPL_STACK=0x18000
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_SUN8I_RSB=y
CONFIG_AXP809_POWER=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN4I=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -9,6 +9,7 @@ CONFIG_DRAM_ODT_EN=y
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y

View file

@ -12,6 +12,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -14,6 +14,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -10,6 +10,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_DFU_RAM=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y

View file

@ -17,6 +17,7 @@ CONFIG_AXP_GPIO=y
CONFIG_SATAPWR="PD25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y

View file

@ -12,4 +12,5 @@ CONFIG_USB0_VBUS_PIN="PH15"
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_USB3_VBUS_PIN="PL8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x18000
CONFIG_SYS_PBSIZE=1024

View file

@ -20,6 +20,7 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -19,6 +19,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x54000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SUN8I_EMAC=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x54000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y

View file

@ -34,6 +34,8 @@ CONFIG_SPL_MAX_SIZE=0x4000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xe6340000
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y

View file

@ -7,6 +7,7 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x54000
CONFIG_SYS_PBSIZE=1024
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

View file

@ -23,6 +23,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x800ffffc
CONFIG_SYS_PROMPT="Apalis TK1 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View file

@ -36,6 +36,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x91ffb8
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y

View file

@ -19,6 +19,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x800ffffc
CONFIG_SYS_PROMPT="Apalis T30 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View file

@ -30,6 +30,8 @@ CONFIG_BOOTDELAY=0
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xfffffffc
CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_OS_BOOT=y

View file

@ -40,6 +40,8 @@ CONFIG_SPL_PAD_TO=0x20000
CONFIG_SPL_BSS_MAX_SIZE=0x600
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x304000
CONFIG_SPL_CRC32=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NAND_RAW_ONLY=y

View file

@ -9,6 +9,7 @@ CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_USB2_VBUS_PIN="PH12"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y

View file

@ -9,6 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y

View file

@ -9,6 +9,7 @@ CONFIG_USB1_VBUS_PIN="PH23"
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=672
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y

View file

@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=672
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x54000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y

View file

@ -6,4 +6,5 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024

View file

@ -7,6 +7,7 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x54000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SUN8I_EMAC=y

View file

@ -16,6 +16,8 @@ CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x800ffffc
CONFIG_SYS_PROMPT="Tegra30 (Beaver) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2084

View file

@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PF6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x118000
CONFIG_SYS_PBSIZE=1024
CONFIG_LED=y
CONFIG_LED_GPIO=y

View file

@ -6,6 +6,7 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=567
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_STACK=0x8000
CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y

View file

@ -29,6 +29,8 @@ CONFIG_USE_PREBOOT=y
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x30000
CONFIG_SPL_BSS_MAX_SIZE=0x100000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xfffffe00
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="antminer> "

View file

@ -32,6 +32,8 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run b_default"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x91ffb8
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_SPI_FLASH=y

View file

@ -15,6 +15,8 @@ CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x800ffffc
CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2084

View file

@ -17,6 +17,8 @@ CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x800ffffc
CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2086

View file

@ -31,6 +31,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x13e000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0

View file

@ -28,6 +28,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff718000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

View file

@ -33,6 +33,8 @@ CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff8effff
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_SPI_LOAD=y

View file

@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff718000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

View file

@ -34,6 +34,8 @@ CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff8effff
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_SPI_LOAD=y

View file

@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff718000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

View file

@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff718000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

Some files were not shown because too many files have changed in this diff Show more