mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
parent
ce30e3ff1e
commit
edca8cf721
140 changed files with 128 additions and 161 deletions
8
README
8
README
|
@ -732,14 +732,6 @@ The following options need to be configured:
|
|||
When enabled, makes the IDE subsystem use 64bit sector addresses.
|
||||
Default is 32bit.
|
||||
|
||||
- SCSI Support:
|
||||
CONFIG_SYS_SCSI_MAX_LUN [8] and CONFIG_SYS_SCSI_MAX_SCSI_ID [7]
|
||||
can be adjusted to define the maximum numbers of LUNs and SCSI
|
||||
IDs.
|
||||
|
||||
The environment variable 'scsidevs' is set to the number of
|
||||
SCSI devices found during the last scan.
|
||||
|
||||
- NETWORK Support (PCI):
|
||||
CONFIG_E1000_SPI
|
||||
Utility code for direct access to the SPI bus on Intel 8257x.
|
||||
|
|
|
@ -172,7 +172,6 @@ config SANDBOX
|
|||
imply FIRMWARE
|
||||
imply HASH_VERIFY
|
||||
imply LZMA
|
||||
imply SCSI
|
||||
imply TEE
|
||||
imply AVB_VERIFY
|
||||
imply LIBAVB
|
||||
|
|
|
@ -78,9 +78,6 @@
|
|||
|
||||
/* SATA */
|
||||
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
#ifdef CONFIG_DDR_SPD
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
|
||||
|
|
|
@ -171,6 +171,7 @@ CONFIG_ENV_ADDR=0xFE080000
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_FSL_SATA=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
||||
CONFIG_SYS_BR0_PRELIM=0xFE001001
|
||||
CONFIG_SYS_OR0_PRELIM=0xFF800193
|
||||
|
|
|
@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -53,6 +53,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -47,6 +47,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -55,6 +55,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=66666666
|
||||
CONFIG_DM_I2C=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
||||
CONFIG_SYS_BR0_PRELIM=0xFFA00C21
|
||||
|
|
|
@ -41,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
||||
CONFIG_SYS_BR0_PRELIM=0xE8001001
|
||||
|
|
|
@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
||||
CONFIG_SYS_BR0_PRELIM=0xE8001001
|
||||
|
|
|
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
||||
CONFIG_SYS_BR0_PRELIM=0xE8001001
|
||||
|
|
|
@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
||||
|
|
|
@ -57,6 +57,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_REMOTE=y
|
||||
CONFIG_ENV_ADDR=0xFFE20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DYNAMIC_DDR_CLK_FREQ=y
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -59,6 +59,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -44,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -62,6 +62,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133330000
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -51,6 +51,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133333333
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
|
|||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
CONFIG_ENV_ADDR=0xEFF20000
|
||||
CONFIG_DM=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DDR_CLK_FREQ=133333333
|
||||
CONFIG_DDR_ECC=y
|
||||
|
|
|
@ -102,6 +102,7 @@ CONFIG_DM_PMIC=y
|
|||
CONFIG_PMIC_PALMAS=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_PALMAS=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
|
|
|
@ -77,6 +77,8 @@ CONFIG_PCI=y
|
|||
CONFIG_DM_PCI_COMPAT=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_SCSI_MAX_SCSI_ID=2
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_KIRKWOOD_SPI=y
|
||||
|
|
|
@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -50,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
# CONFIG_MMC is not set
|
||||
|
|
|
@ -42,6 +42,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_SYS_ATA_STRIDE=4
|
||||
CONFIG_SYS_ATA_DATA_OFFSET=0x100
|
||||
CONFIG_SYS_ATA_REG_OFFSET=0x100
|
||||
|
|
|
@ -46,6 +46,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
|
|
|
@ -29,3 +29,5 @@ CONFIG_BOOTCOUNT_LIMIT=y
|
|||
# CONFIG_MMC is not set
|
||||
CONFIG_CALXEDA_XGMAC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_SCSI_MAX_SCSI_ID=5
|
||||
|
|
|
@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -62,6 +62,7 @@ CONFIG_TSEC_ENET=y
|
|||
CONFIG_NVME=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIE_LAYERSCAPE_RC=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
|
|
|
@ -78,6 +78,7 @@ CONFIG_TSEC_ENET=y
|
|||
CONFIG_NVME=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIE_LAYERSCAPE_RC=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
|
|
|
@ -87,6 +87,7 @@ CONFIG_PCI=y
|
|||
CONFIG_PCIE_LAYERSCAPE_RC=y
|
||||
CONFIG_U_QE=y
|
||||
CONFIG_SYS_QE_FW_ADDR=0x940000
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
|
|
|
@ -88,6 +88,7 @@ CONFIG_PCIE_LAYERSCAPE_EP=y
|
|||
CONFIG_POWER_LEGACY=y
|
||||
CONFIG_POWER_I2C=y
|
||||
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
|
|
|
@ -91,6 +91,7 @@ CONFIG_MII=y
|
|||
CONFIG_FSL_LS_MDIO=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIE_LAYERSCAPE_RC=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
|
|
|
@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_BLK=y
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
|
|
|
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
CONFIG_SYS_I2C_LEGACY=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
|
|
|
@ -44,6 +44,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
|
|
|
@ -47,6 +47,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
|
|||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_CONS_INDEX=3
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_USB=y
|
||||
|
|
|
@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
|
|||
CONFIG_MII=y
|
||||
CONFIG_TSEC_ENET=y
|
||||
CONFIG_SYS_QE_FW_ADDR=0x60020000
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
|
|
|
@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
|
|||
CONFIG_MII=y
|
||||
CONFIG_TSEC_ENET=y
|
||||
CONFIG_SYS_QE_FW_ADDR=0x60020000
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
|
|
|
@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
|
|||
CONFIG_MII=y
|
||||
CONFIG_TSEC_ENET=y
|
||||
CONFIG_SYS_QE_FW_ADDR=0x60020000
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
|
|
|
@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
|
|||
CONFIG_MII=y
|
||||
CONFIG_TSEC_ENET=y
|
||||
CONFIG_SYS_QE_FW_ADDR=0x60020000
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
|
|
|
@ -58,6 +58,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_KIRKWOOD_GPIO=y
|
||||
# CONFIG_MMC_HW_PARTITIONING is not set
|
||||
CONFIG_MVEBU_MMC=y
|
||||
|
|
|
@ -104,6 +104,7 @@ CONFIG_DEVRES=y
|
|||
CONFIG_DEBUG_DEVRES=y
|
||||
CONFIG_ADC=y
|
||||
CONFIG_ADC_SANDBOX=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_SYS_IDE_MAXBUS=1
|
||||
|
|
|
@ -128,6 +128,7 @@ CONFIG_DEBUG_DEVRES=y
|
|||
CONFIG_SIMPLE_PM_BUS=y
|
||||
CONFIG_ADC=y
|
||||
CONFIG_ADC_SANDBOX=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_SYS_IDE_MAXBUS=1
|
||||
|
@ -256,6 +257,9 @@ CONFIG_RESET_SCMI=y
|
|||
CONFIG_DM_RNG=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_RTC_RV8803=y
|
||||
CONFIG_SCSI_AHCI_PLAT=y
|
||||
CONFIG_SYS_SCSI_MAX_SCSI_ID=8
|
||||
CONFIG_SYS_SCSI_MAX_LUN=4
|
||||
CONFIG_SANDBOX_SERIAL=y
|
||||
CONFIG_SMEM=y
|
||||
CONFIG_SANDBOX_SMEM=y
|
||||
|
@ -265,6 +269,7 @@ CONFIG_SOUND_MAX98357A=y
|
|||
CONFIG_SOUND_SANDBOX=y
|
||||
CONFIG_SOC_DEVICE=y
|
||||
CONFIG_SANDBOX_SPI=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SPMI=y
|
||||
CONFIG_SPMI_SANDBOX=y
|
||||
CONFIG_SYSINFO=y
|
||||
|
|
|
@ -84,6 +84,7 @@ CONFIG_DEVRES=y
|
|||
CONFIG_DEBUG_DEVRES=y
|
||||
CONFIG_ADC=y
|
||||
CONFIG_ADC_SANDBOX=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_CLK=y
|
||||
|
|
|
@ -108,6 +108,7 @@ CONFIG_DEBUG_DEVRES=y
|
|||
# CONFIG_SPL_SIMPLE_BUS is not set
|
||||
CONFIG_ADC=y
|
||||
CONFIG_ADC_SANDBOX=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_SYS_IDE_MAXBUS=1
|
||||
|
|
|
@ -110,6 +110,7 @@ CONFIG_DEBUG_DEVRES=y
|
|||
# CONFIG_SPL_SIMPLE_BUS is not set
|
||||
CONFIG_ADC=y
|
||||
CONFIG_ADC_SANDBOX=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_SYS_IDE_MAXBUS=1
|
||||
|
|
|
@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
|
|||
CONFIG_DM=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_MVEBU_MMC=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
|
|
|
@ -55,6 +55,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
|
|||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_SATA=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=1
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
CONFIG_BOOTCOUNT_RAM=y
|
||||
CONFIG_FPGA_ALTERA=y
|
||||
|
|
|
@ -19,6 +19,7 @@ CONFIG_OF_CONTROL=y
|
|||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
# CONFIG_NET is not set
|
||||
# CONFIG_ACPIGEN is not set
|
||||
CONFIG_SYS_SATA_MAX_DEVICE=2
|
||||
CONFIG_AXI=y
|
||||
CONFIG_AXI_SANDBOX=y
|
||||
CONFIG_SANDBOX_GPIO=y
|
||||
|
|
|
@ -135,6 +135,16 @@ config SATA_SIL
|
|||
Enable this driver to support the SIL3131, SIL3132 and SIL3124
|
||||
SATA controllers.
|
||||
|
||||
config SYS_SATA_MAX_DEVICE
|
||||
int "Maximum number of SATA devices"
|
||||
depends on !AHCI || FSL_SATA || SATA_MV
|
||||
help
|
||||
Sets the maximum number of SATA devices which can be supported
|
||||
by U-Boot.
|
||||
|
||||
This is only partially converted to driver model. See sata_bread()
|
||||
for example, which shows where the conversion needs to be completed.
|
||||
|
||||
endif # SATA
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -16,3 +16,33 @@ config DM_SCSI
|
|||
which supports SCSI and SATA HDDs. For every device configuration
|
||||
(IDs/LUNs) a block device is created with RAW read/write and
|
||||
filesystem support.
|
||||
|
||||
if SCSI && !DM_SCSI
|
||||
|
||||
config SCSI_AHCI_PLAT
|
||||
bool "Platform-specific init of AHCI"
|
||||
help
|
||||
This enables a way for boards to set up an AHCI device manually, by
|
||||
called ahci_init() and providing an ahci_reset() mechanism.
|
||||
|
||||
This is deprecated. An AHCI driver should be provided instead.
|
||||
|
||||
config SYS_SCSI_MAX_SCSI_ID
|
||||
int "Maximum supporedt SCSI ID"
|
||||
default 1
|
||||
help
|
||||
Sets the maximum number of SCSI IDs to scan when looking for devices.
|
||||
IDs from 0 to (this value - 1) are scanned.
|
||||
|
||||
This is deprecated and is not needed when BLK is enabled.
|
||||
|
||||
config SYS_SCSI_MAX_LUN
|
||||
int "Maximum support SCSI LUN"
|
||||
default 1
|
||||
help
|
||||
Sets the maximum number of SCSI Logical Unit Numbers (LUNs) to scan on
|
||||
devices. LUNs from 0 to (this value - 1) are scanned.
|
||||
|
||||
This is deprecated and is not needed when CONFIG_DM_SCSI is enabled.
|
||||
|
||||
endif
|
||||
|
|
|
@ -15,4 +15,6 @@ obj-$(CONFIG_SCSI) += scsi.o
|
|||
endif
|
||||
endif
|
||||
|
||||
ifdef CONFIG_SCSI
|
||||
obj-$(CONFIG_SANDBOX) += sandbox_scsi.o
|
||||
endif
|
||||
|
|
|
@ -275,7 +275,6 @@
|
|||
/*
|
||||
* SATA
|
||||
*/
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1_OFFSET 0x18000
|
||||
#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
|
||||
|
|
|
@ -544,7 +544,6 @@ extern unsigned long get_sdram_size(void);
|
|||
#define CONFIG_FSL_SATA_V2
|
||||
|
||||
#ifdef CONFIG_FSL_SATA
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -349,7 +349,6 @@
|
|||
#define CONFIG_FSL_SATA_V2
|
||||
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -11,7 +11,6 @@
|
|||
|
||||
#define CONFIG_PCIE3
|
||||
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_LBA48
|
||||
|
||||
#define CONFIG_SYS_SRIO
|
||||
|
|
|
@ -438,7 +438,6 @@
|
|||
/* SATA */
|
||||
#define CONFIG_FSL_SATA_V2
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -488,7 +488,6 @@
|
|||
* SATA
|
||||
*/
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -443,7 +443,6 @@
|
|||
* SATA
|
||||
*/
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -180,7 +180,6 @@
|
|||
|
||||
/* SATA */
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
@ -466,7 +465,6 @@
|
|||
|
||||
/* SATA */
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -48,11 +48,6 @@
|
|||
#define CONFIG_NET_RETRY_COUNT 10
|
||||
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
|
||||
|
||||
/* SATA */
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
|
||||
/*
|
||||
* Default to using SPI for environment, etc.
|
||||
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
|
||||
|
|
|
@ -35,13 +35,6 @@
|
|||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#endif
|
||||
|
||||
/* SATA support */
|
||||
#ifdef CONFIG_SCSI
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
#endif
|
||||
|
||||
/* Keep device tree and initrd in lower memory so the kernel can access them */
|
||||
#define RELOCATION_LIMITS_ENV_SETTINGS \
|
||||
"fdt_high=0x10000000\0" \
|
||||
|
|
|
@ -160,7 +160,6 @@
|
|||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
||||
|
||||
/* SATA */
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
||||
#define CONFIG_LBA48
|
||||
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
||||
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
||||
|
|
|
@ -18,13 +18,6 @@
|
|||
* U-Boot into it.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SATA/SCSI/AHCI configuration
|
||||
*/
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
|
||||
/* Environment in SPI NOR flash */
|
||||
|
||||
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
||||
|
|
|
@ -347,7 +347,6 @@
|
|||
|
||||
/* SATA */
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
|
|
|
@ -13,13 +13,6 @@
|
|||
/* I2C */
|
||||
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
|
||||
|
||||
/*
|
||||
* SATA/SCSI/AHCI configuration
|
||||
*/
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
|
||||
/* Environment in SPI NOR flash */
|
||||
|
||||
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue