mtd: spi-nor: Rename s25hx_t prefix

Rename s25hx_t prefix to s25 so that the single set of fixup hooks can
support all other S25 families.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Takahiro Kuwano 2022-12-19 10:28:20 +09:00 committed by Jagan Teki
parent ee0b0be204
commit eadaadbb8f

View file

@ -3195,7 +3195,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
}
#ifdef CONFIG_SPI_FLASH_SPANSION
static int s25hx_t_mdp_ready(struct spi_nor *nor)
static int s25_mdp_ready(struct spi_nor *nor)
{
u32 addr;
int ret;
@ -3209,7 +3209,7 @@ static int s25hx_t_mdp_ready(struct spi_nor *nor)
return 1;
}
static int s25hx_t_quad_enable(struct spi_nor *nor)
static int s25_quad_enable(struct spi_nor *nor)
{
u32 addr;
int ret;
@ -3223,14 +3223,14 @@ static int s25hx_t_quad_enable(struct spi_nor *nor)
return 0;
}
static int s25hx_t_erase_non_uniform(struct spi_nor *nor, loff_t addr)
static int s25_erase_non_uniform(struct spi_nor *nor, loff_t addr)
{
/* Support 32 x 4KB sectors at bottom */
return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0,
SZ_128K);
}
static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
const struct spi_nor_flash_parameter *params)
{
int ret;
@ -3247,24 +3247,24 @@ static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
if (ret)
return ret;
if (!(cfr3v & CFR3V_UNHYSA))
nor->erase = s25hx_t_erase_non_uniform;
nor->erase = s25_erase_non_uniform;
/*
* For the multi-die package parts, the ready() hook is needed to check
* all dies' status via read any register.
*/
if (nor->mtd.size > SZ_128M)
nor->ready = s25hx_t_mdp_ready;
nor->ready = s25_mdp_ready;
return spi_nor_default_setup(nor, info, params);
}
static void s25hx_t_default_init(struct spi_nor *nor)
static void s25_default_init(struct spi_nor *nor)
{
nor->setup = s25hx_t_setup;
nor->setup = s25_setup;
}
static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
static int s25_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *header,
const struct sfdp_bfpt *bfpt,
struct spi_nor_flash_parameter *params)
@ -3318,7 +3318,7 @@ static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
return 0;
}
static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor,
static void s25_post_sfdp_fixup(struct spi_nor *nor,
struct spi_nor_flash_parameter *params)
{
/* READ_FAST_4B (0Ch) requires mode cycles*/
@ -3326,13 +3326,13 @@ static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor,
/* PP_1_1_4 is not supported */
params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4;
/* Use volatile register to enable quad */
params->quad_enable = s25hx_t_quad_enable;
params->quad_enable = s25_quad_enable;
}
static struct spi_nor_fixups s25hx_t_fixups = {
.default_init = s25hx_t_default_init,
.post_bfpt = s25hx_t_post_bfpt_fixup,
.post_sfdp = s25hx_t_post_sfdp_fixup,
static struct spi_nor_fixups s25_fixups = {
.default_init = s25_default_init,
.post_bfpt = s25_post_bfpt_fixup,
.post_sfdp = s25_post_sfdp_fixup,
};
static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info,
@ -3850,7 +3850,7 @@ void spi_nor_set_fixups(struct spi_nor *nor)
switch (nor->info->id[1]) {
case 0x2a: /* S25HL (QSPI, 3.3V) */
case 0x2b: /* S25HS (QSPI, 1.8V) */
nor->fixups = &s25hx_t_fixups;
nor->fixups = &s25_fixups;
break;
#ifdef CONFIG_SPI_FLASH_S28HX_T