mtd: spi-nor: Rename s25hx_t prefix

Rename s25hx_t prefix to s25 so that the single set of fixup hooks can
support all other S25 families.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Takahiro Kuwano 2022-12-19 10:28:20 +09:00 committed by Jagan Teki
parent ee0b0be204
commit eadaadbb8f

View file

@ -3195,7 +3195,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
} }
#ifdef CONFIG_SPI_FLASH_SPANSION #ifdef CONFIG_SPI_FLASH_SPANSION
static int s25hx_t_mdp_ready(struct spi_nor *nor) static int s25_mdp_ready(struct spi_nor *nor)
{ {
u32 addr; u32 addr;
int ret; int ret;
@ -3209,7 +3209,7 @@ static int s25hx_t_mdp_ready(struct spi_nor *nor)
return 1; return 1;
} }
static int s25hx_t_quad_enable(struct spi_nor *nor) static int s25_quad_enable(struct spi_nor *nor)
{ {
u32 addr; u32 addr;
int ret; int ret;
@ -3223,15 +3223,15 @@ static int s25hx_t_quad_enable(struct spi_nor *nor)
return 0; return 0;
} }
static int s25hx_t_erase_non_uniform(struct spi_nor *nor, loff_t addr) static int s25_erase_non_uniform(struct spi_nor *nor, loff_t addr)
{ {
/* Support 32 x 4KB sectors at bottom */ /* Support 32 x 4KB sectors at bottom */
return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0, return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0,
SZ_128K); SZ_128K);
} }
static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info, static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
const struct spi_nor_flash_parameter *params) const struct spi_nor_flash_parameter *params)
{ {
int ret; int ret;
u8 cfr3v; u8 cfr3v;
@ -3247,27 +3247,27 @@ static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
if (ret) if (ret)
return ret; return ret;
if (!(cfr3v & CFR3V_UNHYSA)) if (!(cfr3v & CFR3V_UNHYSA))
nor->erase = s25hx_t_erase_non_uniform; nor->erase = s25_erase_non_uniform;
/* /*
* For the multi-die package parts, the ready() hook is needed to check * For the multi-die package parts, the ready() hook is needed to check
* all dies' status via read any register. * all dies' status via read any register.
*/ */
if (nor->mtd.size > SZ_128M) if (nor->mtd.size > SZ_128M)
nor->ready = s25hx_t_mdp_ready; nor->ready = s25_mdp_ready;
return spi_nor_default_setup(nor, info, params); return spi_nor_default_setup(nor, info, params);
} }
static void s25hx_t_default_init(struct spi_nor *nor) static void s25_default_init(struct spi_nor *nor)
{ {
nor->setup = s25hx_t_setup; nor->setup = s25_setup;
} }
static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor, static int s25_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *header, const struct sfdp_parameter_header *header,
const struct sfdp_bfpt *bfpt, const struct sfdp_bfpt *bfpt,
struct spi_nor_flash_parameter *params) struct spi_nor_flash_parameter *params)
{ {
int ret; int ret;
u32 addr; u32 addr;
@ -3318,21 +3318,21 @@ static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
return 0; return 0;
} }
static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor, static void s25_post_sfdp_fixup(struct spi_nor *nor,
struct spi_nor_flash_parameter *params) struct spi_nor_flash_parameter *params)
{ {
/* READ_FAST_4B (0Ch) requires mode cycles*/ /* READ_FAST_4B (0Ch) requires mode cycles*/
params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8; params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
/* PP_1_1_4 is not supported */ /* PP_1_1_4 is not supported */
params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4; params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4;
/* Use volatile register to enable quad */ /* Use volatile register to enable quad */
params->quad_enable = s25hx_t_quad_enable; params->quad_enable = s25_quad_enable;
} }
static struct spi_nor_fixups s25hx_t_fixups = { static struct spi_nor_fixups s25_fixups = {
.default_init = s25hx_t_default_init, .default_init = s25_default_init,
.post_bfpt = s25hx_t_post_bfpt_fixup, .post_bfpt = s25_post_bfpt_fixup,
.post_sfdp = s25hx_t_post_sfdp_fixup, .post_sfdp = s25_post_sfdp_fixup,
}; };
static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info, static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info,
@ -3850,7 +3850,7 @@ void spi_nor_set_fixups(struct spi_nor *nor)
switch (nor->info->id[1]) { switch (nor->info->id[1]) {
case 0x2a: /* S25HL (QSPI, 3.3V) */ case 0x2a: /* S25HL (QSPI, 3.3V) */
case 0x2b: /* S25HS (QSPI, 1.8V) */ case 0x2b: /* S25HS (QSPI, 1.8V) */
nor->fixups = &s25hx_t_fixups; nor->fixups = &s25_fixups;
break; break;
#ifdef CONFIG_SPI_FLASH_S28HX_T #ifdef CONFIG_SPI_FLASH_S28HX_T