Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-21 23:21:58 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge git://www.denx.de/git/u-boot-imx

Browse source
This commit is contained in:
Tom Rini 2017-10-12 13:36:37 -04:00
commit e11d2fff73
72 changed files with 2870 additions and 123 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
arch/arm/include/asm/arch-mx6/clock.h
View file

@ -80,4 +80,5 @@ void enable_thermal_clk(void);
void mxs_set_lcdclk(u32 base_addr, u32 freq);
void select_ldb_di_clock_source(enum ldb_di_clock clk);
void enable_eim_clk(unsigned char enable);
int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif /* __ASM_ARCH_CLOCK_H */

3
arch/arm/include/asm/arch-mx6/sys_proto.h
View file

@ -13,3 +13,6 @@
#define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
USBPHY_PWD_RXPWDRX))
int imx6_pcie_toggle_power(void);
int imx6_pcie_toggle_reset(void);

45
arch/arm/include/asm/arch-mx7/crm_regs.h
View file

@ -2000,29 +2000,29 @@ struct mxc_ccm_anatop_reg {
#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_MASK)
#define CCM_GPR(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i))
#define CCM_OBSERVE(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i))
#define CCM_SCTRL(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i))
#define CCM_CCGR(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i))
#define CCM_ROOT_TARGET(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i))
#define CCM_GPR(i) (CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i))
#define CCM_OBSERVE(i) (CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i))
#define CCM_SCTRL(i) (CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i))
#define CCM_CCGR(i) (CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i))
#define CCM_ROOT_TARGET(i) (CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i))
#define CCM_GPR_SET(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 4)
#define CCM_OBSERVE_SET(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 4)
#define CCM_SCTRL_SET(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 4)
#define CCM_CCGR_SET(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 4)
#define CCM_ROOT_TARGET_SET(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 4)
#define CCM_GPR_SET(i) (CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 4)
#define CCM_OBSERVE_SET(i) (CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 4)
#define CCM_SCTRL_SET(i) (CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 4)
#define CCM_CCGR_SET(i) (CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 4)
#define CCM_ROOT_TARGET_SET(i) (CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 4)
#define CCM_GPR_CLR(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 8)
#define CCM_OBSERVE_CLR(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 8)
#define CCM_SCTRL_CLR(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 8)
#define CCM_CCGR_CLR(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 8)
#define CCM_ROOT_TARGET_CLR(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 8)
#define CCM_GPR_CLR(i) (CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 8)
#define CCM_OBSERVE_CLR(i) (CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 8)
#define CCM_SCTRL_CLR(i) (CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 8)
#define CCM_CCGR_CLR(i) (CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 8)
#define CCM_ROOT_TARGET_CLR(i) (CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 8)
#define CCM_GPR_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 12)
#define CCM_OBSERVE_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 12)
#define CCM_SCTRL_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 12)
#define CCM_CCGR_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 12)
#define CCM_ROOT_TARGET_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 12)
#define CCM_GPR_TOGGLE(i) (CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 12)
#define CCM_OBSERVE_TOGGLE(i) (CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 12)
#define CCM_SCTRL_TOGGLE(i) (CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 12)
#define CCM_CCGR_TOGGLE(i) (CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 12)
#define CCM_ROOT_TARGET_TOGGLE(i) (CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 12)
#define HW_CCM_GPR_WR(i, v) writel((v), CCM_GPR(i))
#define HW_CCM_CCM_OBSERVE_WR(i, v) writel((v), CCM_OBSERVE(i))
@ -2055,6 +2055,11 @@ struct mxc_ccm_anatop_reg {
#define HW_CCM_ROOT_TARGET_TOGGLE(i, v) writel((v), CCM_ROOT_TARGET_TOGGLE(i))
#define CCM_CLK_ON_MSK 0x03
#define CCM_CLK_ON_N_N 0x00 /* Domain clocks not needed */
#define CCM_CLK_ON_R_W 0x02 /* Domain clocks needed when in RUN and WAIT */
/* CCGR Mapping */
#define CCGR_IDX_DDR 19 /* CCM_CCGR19 */
#define CCM_ROOT_TGT_POST_DIV_SHIFT 0
#define CCM_ROOT_TGT_PRE_DIV_SHIFT 15

2
arch/arm/include/asm/arch-mx7/imx-regs.h
View file

@ -268,6 +268,8 @@ struct src {
#define SRC_M4RCR_M4C_NON_SCLR_RST_MASK (1 << 0)
#define SRC_M4RCR_ENABLE_M4_OFFSET 3
#define SRC_M4RCR_ENABLE_M4_MASK (1 << 3)
#define SRC_DDRC_RCR_DDRC_CORE_RST_OFFSET 1
#define SRC_DDRC_RCR_DDRC_CORE_RST_MASK (1 << 1)
/* GPR0 Bit Fields */
#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL0_MASK 0x1u

155
arch/arm/include/asm/arch-mx7/mx7-ddr.h Normal file
View file

@ -0,0 +1,155 @@
/*
* DDR controller registers of the i.MX7 architecture
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_ARCH_MX7_DDR_H__
#define __ASM_ARCH_MX7_DDR_H__
/* DDRC Registers (DDRC_IPS_BASE_ADDR) */
struct ddrc {
u32 mstr; /* 0x0000 */
u32 reserved1[0x18];
u32 rfshtmg; /* 0x0064 */
u32 reserved2[0x1a];
u32 init0; /* 0x00d0 */
u32 init1; /* 0x00d4 */
u32 reserved3;
u32 init3; /* 0x00dc */
u32 init4; /* 0x00e0 */
u32 init5; /* 0x00e4 */
u32 reserved4[0x03];
u32 rankctl; /* 0x00f4 */
u32 reserved5[0x02];
u32 dramtmg0; /* 0x0100 */
u32 dramtmg1; /* 0x0104 */
u32 dramtmg2; /* 0x0108 */
u32 dramtmg3; /* 0x010c */
u32 dramtmg4; /* 0x0110 */
u32 dramtmg5; /* 0x0114 */
u32 reserved6[0x02];
u32 dramtmg8; /* 0x0120 */
u32 reserved7[0x17];
u32 zqctl0; /* 0x0180 */
u32 reserved8[0x03];
u32 dfitmg0; /* 0x0190 */
u32 dfitmg1; /* 0x0194 */
u32 reserved9[0x02];
u32 dfiupd0; /* 0x01a0 */
u32 dfiupd1; /* 0x01a4 */
u32 dfiupd2; /* 0x01a8 */
u32 reserved10[0x15];
u32 addrmap0; /* 0x0200 */
u32 addrmap1; /* 0x0204 */
u32 addrmap2; /* 0x0208 */
u32 addrmap3; /* 0x020c */
u32 addrmap4; /* 0x0210 */
u32 addrmap5; /* 0x0214 */
u32 addrmap6; /* 0x0218 */
u32 reserved12[0x09];
u32 odtcfg; /* 0x0240 */
u32 odtmap; /* 0x0244 */
};
/* DDRC_MSTR fields */
#define MSTR_DATA_BUS_WIDTH_MASK 0x3 << 12
#define MSTR_DATA_BUS_WIDTH_SHIFT 12
#define MSTR_DATA_ACTIVE_RANKS_MASK 0xf << 24
#define MSTR_DATA_ACTIVE_RANKS_SHIFT 24
/* DDRC_ADDRMAP1 fields */
#define ADDRMAP1_BANK_B0_MASK 0x1f << 0
#define ADDRMAP1_BANK_B0_SHIFT 0
#define ADDRMAP1_BANK_B1_MASK 0x1f << 8
#define ADDRMAP1_BANK_B1_SHIFT 8
#define ADDRMAP1_BANK_B2_MASK 0x1f << 16
#define ADDRMAP1_BANK_B2_SHIFT 16
/* DDRC_ADDRMAP2 fields */
#define ADDRMAP2_COL_B2_MASK 0xF << 0
#define ADDRMAP2_COL_B2_SHIFT 0
#define ADDRMAP2_COL_B3_MASK 0xF << 8
#define ADDRMAP2_COL_B3_SHIFT 8
#define ADDRMAP2_COL_B4_MASK 0xF << 16
#define ADDRMAP2_COL_B4_SHIFT 16
#define ADDRMAP2_COL_B5_MASK 0xF << 24
#define ADDRMAP2_COL_B5_SHIFT 24
/* DDRC_ADDRMAP3 fields */
#define ADDRMAP3_COL_B6_MASK 0xF << 0
#define ADDRMAP3_COL_B6_SHIFT 0
#define ADDRMAP3_COL_B7_MASK 0xF << 8
#define ADDRMAP3_COL_B7_SHIFT 8
#define ADDRMAP3_COL_B8_MASK 0xF << 16
#define ADDRMAP3_COL_B8_SHIFT 16
#define ADDRMAP3_COL_B9_MASK 0xF << 24
#define ADDRMAP3_COL_B9_SHIFT 24
/* DDRC_ADDRMAP4 fields */
#define ADDRMAP4_COL_B10_MASK 0xF << 0
#define ADDRMAP4_COL_B10_SHIFT 0
#define ADDRMAP4_COL_B11_MASK 0xF << 8
#define ADDRMAP4_COL_B11_SHIFT 8
/* DDRC_ADDRMAP5 fields */
#define ADDRMAP5_ROW_B0_MASK 0xF << 0
#define ADDRMAP5_ROW_B0_SHIFT 0
#define ADDRMAP5_ROW_B1_MASK 0xF << 8
#define ADDRMAP5_ROW_B1_SHIFT 8
#define ADDRMAP5_ROW_B2_10_MASK 0xF << 16
#define ADDRMAP5_ROW_B2_10_SHIFT 16
#define ADDRMAP5_ROW_B11_MASK 0xF << 24
#define ADDRMAP5_ROW_B11_SHIFT 24
/* DDRC_ADDRMAP6 fields */
#define ADDRMAP6_ROW_B12_MASK 0xF << 0
#define ADDRMAP6_ROW_B12_SHIFT 0
#define ADDRMAP6_ROW_B13_MASK 0xF << 8
#define ADDRMAP6_ROW_B13_SHIFT 8
#define ADDRMAP6_ROW_B14_MASK 0xF << 16
#define ADDRMAP6_ROW_B14_SHIFT 16
#define ADDRMAP6_ROW_B15_MASK 0xF << 24
#define ADDRMAP6_ROW_B15_SHIFT 24
/* DDRC_MP Registers */
#define DDRC_MP_BASE_ADDR (DDRC_IPS_BASE_ADDR + 0x03fc)
struct ddrc_mp {
u32 reserved1[0x25];
u32 pctrl_0; /* 0x0094 */
};
/* DDR_PHY registers */
struct ddr_phy {
u32 phy_con0; /* 0x0000 */
u32 phy_con1; /* 0x0004 */
u32 reserved1[0x02];
u32 phy_con4; /* 0x0010 */
u32 reserved2;
u32 offset_lp_con0; /* 0x0018 */
u32 reserved3;
u32 offset_rd_con0; /* 0x0020 */
u32 reserved4[0x03];
u32 offset_wr_con0; /* 0x0030 */
u32 reserved5[0x07];
u32 cmd_sdll_con0; /* 0x0050 */
u32 reserved6[0x12];
u32 drvds_con0; /* 0x009c */
u32 reserved7[0x04];
u32 mdll_con0; /* 0x00b0 */
u32 reserved8[0x03];
u32 zq_con0; /* 0x00c0 */
};
#define DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK BIT(24)
#define MX7_CAL_VAL_MAX 5
/* Calibration parameters */
struct mx7_calibration {
int num_val; /* Number of calibration values */
u32 values[MX7_CAL_VAL_MAX]; /* calibration values */
};
void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
struct ddr_phy *ddr_phy_regs_val,
struct mx7_calibration *calib_param);
#endif /*__ASM_ARCH_MX7_DDR_H__ */

1
arch/arm/include/asm/arch-mx7/sys_proto.h
View file

@ -7,3 +7,4 @@
#include <asm/mach-imx/sys_proto.h>
void set_wdog_reset(struct wdog_regs *wdog);
enum boot_device get_boot_device(void);

2
arch/arm/include/asm/mach-imx/sys_proto.h
View file

@ -107,6 +107,8 @@ void init_aips(void);
void init_src(void);
void imx_set_wdog_powerdown(bool enable);
int board_mmc_get_env_dev(int devno);
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()

4
arch/arm/mach-imx/cpu.c
View file

@ -25,7 +25,7 @@
#include <fsl_esdhc.h>
#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD)
static u32 reset_cause = -1;
static char *get_reset_cause(void)
@ -132,7 +132,7 @@ unsigned imx_ddr_size(void)
}
#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD)
const char *get_imx_type(u32 imxtype)
{

10
arch/arm/mach-imx/mx6/Kconfig
View file

@ -129,6 +129,15 @@ config TARGET_COLIBRI_IMX6
select DM_SERIAL
select DM_THERMAL
config TARGET_DHCOMIMX6
bool "dh_imx6"
select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
select SUPPORT_SPL
select DM
select DM_THERMAL
imply CMD_SPL
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
@ -428,6 +437,7 @@ source "board/boundary/nitrogen6x/Kconfig"
source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/engicam/geam6ul/Kconfig"

30
arch/arm/mach-imx/mx6/clock.c
View file

@ -1220,6 +1220,20 @@ void enable_thermal_clk(void)
enable_pll3();
}
#ifdef CONFIG_MTD_NOR_FLASH
void enable_eim_clk(unsigned char enable)
{
u32 reg;
reg = __raw_readl(&imx_ccm->CCGR6);
if (enable)
reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
else
reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
__raw_writel(reg, &imx_ccm->CCGR6);
}
#endif
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
@ -1262,6 +1276,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
return 0;
}
#ifndef CONFIG_SPL_BUILD
/*
* Dump some core clockes.
*/
@ -1463,20 +1478,6 @@ void select_ldb_di_clock_source(enum ldb_di_clock clk)
}
#endif
#ifdef CONFIG_MTD_NOR_FLASH
void enable_eim_clk(unsigned char enable)
{
u32 reg;
reg = __raw_readl(&imx_ccm->CCGR6);
if (enable)
reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
else
reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
__raw_writel(reg, &imx_ccm->CCGR6);
}
#endif
/***************************************************/
U_BOOT_CMD(
@ -1484,3 +1485,4 @@ U_BOOT_CMD(
"display clocks",
""
);
#endif

1
arch/arm/mach-imx/mx6/soc.c
View file

@ -13,6 +13,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/bootm.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/dma.h>
#include <asm/mach-imx/hab.h>

8
arch/arm/mach-imx/mx7/Kconfig
View file

@ -18,6 +18,13 @@ choice
prompt "MX7 board select"
optional
config TARGET_CL_SOM_IMX7
bool "CL-SOM-iMX7"
select MX7D
select DM
select DM_THERMAL
select SUPPORT_SPL
config TARGET_MX7DSABRESD
bool "mx7dsabresd"
select BOARD_LATE_INIT
@ -51,6 +58,7 @@ endchoice
config SYS_SOC
default "mx7"
source "board/compulab/cl-som-imx7/Kconfig"
source "board/freescale/mx7dsabresd/Kconfig"
source "board/technexion/pico-imx7d/Kconfig"
source "board/toradex/colibri_imx7/Kconfig"

2
arch/arm/mach-imx/mx7/Makefile
View file

@ -5,7 +5,7 @@
#
#
obj-y := soc.o clock.o clock_slice.o
obj-y := soc.o clock.o clock_slice.o ddr.o
ifdef CONFIG_ARMV7_PSCI
obj-y += psci-mx7.o psci.o

201
arch/arm/mach-imx/mx7/ddr.c Normal file
View file

@ -0,0 +1,201 @@
/*
* DDR controller configuration for the i.MX7 architecture
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/types.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx7-ddr.h>
#include <common.h>
/*
* Routine: mx7_dram_cfg
* Description: DDR controller configuration
*
* @ddrc_regs_val: DDRC registers value
* @ddrc_mp_val: DDRC_MP registers value
* @ddr_phy_regs_val: DDR_PHY registers value
* @calib_param: calibration parameters
*
*/
void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
struct ddr_phy *ddr_phy_regs_val,
struct mx7_calibration *calib_param)
{
struct src *const src_regs = (struct src *)SRC_BASE_ADDR;
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
struct ddrc_mp *const ddrc_mp_reg = (struct ddrc_mp *)DDRC_MP_BASE_ADDR;
struct ddr_phy *const ddr_phy_regs =
(struct ddr_phy *)DDRPHY_IPS_BASE_ADDR;
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
int i;
/* Assert DDR Controller preset and DDR PHY reset */
writel(SRC_DDRC_RCR_DDRC_CORE_RST_MASK, &src_regs->ddrc_rcr);
/* DDR controller configuration */
writel(ddrc_regs_val->mstr, &ddrc_regs->mstr);
writel(ddrc_regs_val->rfshtmg, &ddrc_regs->rfshtmg);
writel(ddrc_mp_val->pctrl_0, &ddrc_mp_reg->pctrl_0);
writel(ddrc_regs_val->init1, &ddrc_regs->init1);
writel(ddrc_regs_val->init0, &ddrc_regs->init0);
writel(ddrc_regs_val->init3, &ddrc_regs->init3);
writel(ddrc_regs_val->init4, &ddrc_regs->init4);
writel(ddrc_regs_val->init5, &ddrc_regs->init5);
writel(ddrc_regs_val->rankctl, &ddrc_regs->rankctl);
writel(ddrc_regs_val->dramtmg0, &ddrc_regs->dramtmg0);
writel(ddrc_regs_val->dramtmg1, &ddrc_regs->dramtmg1);
writel(ddrc_regs_val->dramtmg2, &ddrc_regs->dramtmg2);
writel(ddrc_regs_val->dramtmg3, &ddrc_regs->dramtmg3);
writel(ddrc_regs_val->dramtmg4, &ddrc_regs->dramtmg4);
writel(ddrc_regs_val->dramtmg5, &ddrc_regs->dramtmg5);
writel(ddrc_regs_val->dramtmg8, &ddrc_regs->dramtmg8);
writel(ddrc_regs_val->zqctl0, &ddrc_regs->zqctl0);
writel(ddrc_regs_val->dfitmg0, &ddrc_regs->dfitmg0);
writel(ddrc_regs_val->dfitmg1, &ddrc_regs->dfitmg1);
writel(ddrc_regs_val->dfiupd0, &ddrc_regs->dfiupd0);
writel(ddrc_regs_val->dfiupd1, &ddrc_regs->dfiupd1);
writel(ddrc_regs_val->dfiupd2, &ddrc_regs->dfiupd2);
writel(ddrc_regs_val->addrmap0, &ddrc_regs->addrmap0);
writel(ddrc_regs_val->addrmap1, &ddrc_regs->addrmap1);
writel(ddrc_regs_val->addrmap4, &ddrc_regs->addrmap4);
writel(ddrc_regs_val->addrmap5, &ddrc_regs->addrmap5);
writel(ddrc_regs_val->addrmap6, &ddrc_regs->addrmap6);
writel(ddrc_regs_val->odtcfg, &ddrc_regs->odtcfg);
writel(ddrc_regs_val->odtmap, &ddrc_regs->odtmap);
/* De-assert DDR Controller preset and DDR PHY reset */
clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_CORE_RST_MASK);
/* PHY configuration */
writel(ddr_phy_regs_val->phy_con0, &ddr_phy_regs->phy_con0);
writel(ddr_phy_regs_val->phy_con1, &ddr_phy_regs->phy_con1);
writel(ddr_phy_regs_val->phy_con4, &ddr_phy_regs->phy_con4);
writel(ddr_phy_regs_val->mdll_con0, &ddr_phy_regs->mdll_con0);
writel(ddr_phy_regs_val->drvds_con0, &ddr_phy_regs->drvds_con0);
writel(ddr_phy_regs_val->offset_wr_con0, &ddr_phy_regs->offset_wr_con0);
writel(ddr_phy_regs_val->offset_rd_con0, &ddr_phy_regs->offset_rd_con0);
writel(ddr_phy_regs_val->cmd_sdll_con0 |
DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
&ddr_phy_regs->cmd_sdll_con0);
writel(ddr_phy_regs_val->cmd_sdll_con0 &
~DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
&ddr_phy_regs->cmd_sdll_con0);
writel(ddr_phy_regs_val->offset_lp_con0, &ddr_phy_regs->offset_lp_con0);
/* calibration */
for (i = 0; i < calib_param->num_val; i++)
writel(calib_param->values[i], &ddr_phy_regs->zq_con0);
/* Wake_up DDR PHY */
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_N_N);
writel(IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(0xf) |
IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK,
&iomuxc_gpr_regs->gpr[8]);
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_R_W);
}
/*
* Routine: imx_ddr_size
* Description: extract the current DRAM size from the DDRC registers
*
* @return: DRAM size
*/
unsigned int imx_ddr_size(void)
{
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
u32 reg_val, field_val;
int bits = 0;/* Number of address bits */
/* Count data bus width bits */
reg_val = readl(&ddrc_regs->mstr);
field_val = (reg_val & MSTR_DATA_BUS_WIDTH_MASK) >> MSTR_DATA_BUS_WIDTH_SHIFT;
bits += 2 - field_val;
/* Count rank address bits */
field_val = (reg_val & MSTR_DATA_ACTIVE_RANKS_MASK) >> MSTR_DATA_ACTIVE_RANKS_SHIFT;
if (field_val > 1)
bits += field_val - 1;
/* Count column address bits */
bits += 2;/* Column address 0 and 1 are fixed mapped */
reg_val = readl(&ddrc_regs->addrmap2);
field_val = (reg_val & ADDRMAP2_COL_B2_MASK) >> ADDRMAP2_COL_B2_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B3_MASK) >> ADDRMAP2_COL_B3_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B4_MASK) >> ADDRMAP2_COL_B4_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B5_MASK) >> ADDRMAP2_COL_B5_SHIFT;
if (field_val <= 7)
bits++;
reg_val = readl(&ddrc_regs->addrmap3);
field_val = (reg_val & ADDRMAP3_COL_B6_MASK) >> ADDRMAP3_COL_B6_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B7_MASK) >> ADDRMAP3_COL_B7_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B8_MASK) >> ADDRMAP3_COL_B8_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B9_MASK) >> ADDRMAP3_COL_B9_SHIFT;
if (field_val <= 7)
bits++;
reg_val = readl(&ddrc_regs->addrmap4);
field_val = (reg_val & ADDRMAP4_COL_B10_MASK) >> ADDRMAP4_COL_B10_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP4_COL_B11_MASK) >> ADDRMAP4_COL_B11_SHIFT;
if (field_val <= 7)
bits++;
/* Count row address bits */
reg_val = readl(&ddrc_regs->addrmap5);
field_val = (reg_val & ADDRMAP5_ROW_B0_MASK) >> ADDRMAP5_ROW_B0_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP5_ROW_B1_MASK) >> ADDRMAP5_ROW_B1_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP5_ROW_B2_10_MASK) >> ADDRMAP5_ROW_B2_10_SHIFT;
if (field_val <= 11)
bits += 9;
field_val = (reg_val & ADDRMAP5_ROW_B11_MASK) >> ADDRMAP5_ROW_B11_SHIFT;
if (field_val <= 11)
bits++;
reg_val = readl(&ddrc_regs->addrmap6);
field_val = (reg_val & ADDRMAP6_ROW_B12_MASK) >> ADDRMAP6_ROW_B12_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B13_MASK) >> ADDRMAP6_ROW_B13_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B14_MASK) >> ADDRMAP6_ROW_B14_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B15_MASK) >> ADDRMAP6_ROW_B15_SHIFT;
if (field_val <= 11)
bits++;
/* Count bank bits */
reg_val = readl(&ddrc_regs->addrmap1);
field_val = (reg_val & ADDRMAP1_BANK_B0_MASK) >> ADDRMAP1_BANK_B0_SHIFT;
if (field_val <= 30)
bits++;
field_val = (reg_val & ADDRMAP1_BANK_B1_MASK) >> ADDRMAP1_BANK_B1_SHIFT;
if (field_val <= 30)
bits++;
field_val = (reg_val & ADDRMAP1_BANK_B2_MASK) >> ADDRMAP1_BANK_B2_SHIFT;
if (field_val <= 29)
bits++;
return 1 << bits;
}

23
arch/arm/mach-imx/spl.c
View file

@ -14,6 +14,7 @@
#include <asm/spl.h>
#include <spl.h>
#include <asm/mach-imx/hab.h>
#include <asm/mach-imx/boot_mode.h>
#include <g_dnl.h>
DECLARE_GLOBAL_DATA_PTR;
@ -96,6 +97,27 @@ u32 spl_boot_device(void)
return BOOT_DEVICE_NONE;
}
#elif defined(CONFIG_MX7)
/* Translate iMX7 boot device to the SPL boot device enumeration */
u32 spl_boot_device(void)
{
enum boot_device boot_device_spl = get_boot_device();
switch (boot_device_spl) {
case SD1_BOOT:
case MMC1_BOOT:
return BOOT_DEVICE_MMC1;
case SD2_BOOT:
case MMC2_BOOT:
return BOOT_DEVICE_MMC2;
case SPI_NOR_BOOT:
return BOOT_DEVICE_SPI;
default:
return BOOT_DEVICE_NONE;
}
}
#endif /* CONFIG_MX6 || CONFIG_MX7 */
#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
@ -104,7 +126,6 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
return 0;
}
#endif
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */

1
board/advantech/dms-ba16/dms-ba16.c
View file

@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <pwm.h>
DECLARE_GLOBAL_DATA_PTR;

1
board/aristainetos/aristainetos.c
View file

@ -28,6 +28,7 @@
#include <asm/arch/crm_regs.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#include <input.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <pwm.h>

1
board/beckhoff/mx53cx9020/mx53cx9020.c
View file

@ -26,6 +26,7 @@
#include <asm/gpio.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#include <input.h>
#include <fs.h>
#include <dm/platform_data/serial_mxc.h>

14
board/ccv/xpress/xpress.c
View file

@ -108,6 +108,8 @@ int dram_init(void)
static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART1_CTS_B__UART1_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART1_RTS_B__UART1_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart4_pads[] = {
@ -122,11 +124,14 @@ static iomux_v3_cfg_t const uart5_pads[] = {
MX6_PAD_GPIO1_IO08__UART5_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart7_pads[] = {
MX6_PAD_ENET2_RX_EN__UART7_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart8_pads[] = {
MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_ENET2_TX_EN__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_LCD_DATA20__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_LCD_DATA21__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static void setup_iomux_uart(void)
@ -134,6 +139,7 @@ static void setup_iomux_uart(void)
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
imx_iomux_v3_setup_multiple_pads(uart7_pads, ARRAY_SIZE(uart7_pads));
imx_iomux_v3_setup_multiple_pads(uart8_pads, ARRAY_SIZE(uart8_pads));
}

28
board/compulab/cl-som-imx7/Kconfig Normal file
View file

@ -0,0 +1,28 @@
if TARGET_CL_SOM_IMX7
config SYS_BOARD
default "cl-som-imx7"
config SYS_VENDOR
default "compulab"
config SYS_CONFIG_NAME
default "cl-som-imx7"
config SYS_MMC_DEV
int
default 0
config SYS_USB_DEV
int
default 0
config SYS_MMC_IMG_LOAD_PART
int
default 1
config SYS_USB_IMG_LOAD_PART
int
default 1
endif

6
board/compulab/cl-som-imx7/MAINTAINERS Normal file
View file

@ -0,0 +1,6 @@
CL-SOM-IMX7 BOARD
M: Uri Mashiach <uri.mashiach@compulab.co.il>
S: Maintained
F: board/compulab/cl-som-imx7
F: include/configs/cl-som-imx7.h
F: configs/cl-som-imx7_defconfig

17
board/compulab/cl-som-imx7/Makefile Normal file
View file

@ -0,0 +1,17 @@
#
# Makefile
#
# (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
#
# Author: Uri Mashiach <uri.mashiach@compulab.co.il>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := mux.o common.o
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
else
obj-y += cl-som-imx7.o
endif

331
board/compulab/cl-som-imx7/cl-som-imx7.c Normal file
View file

@ -0,0 +1,331 @@
/*
* U-Boot board functions for CompuLab CL-SOM-iMX7 module
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mmc.h>
#include <phy.h>
#include <netdev.h>
#include <fsl_esdhc.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/arch-mx7/mx7-pins.h>
#include <asm/arch-mx7/sys_proto.h>
#include <asm/arch-mx7/clock.h>
#include "../common/eeprom.h"
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SYS_I2C_MXC
#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS)
#define CL_SOM_IMX7_GPIO_I2C2_SCL IMX_GPIO_NR(1, 6)
#define CL_SOM_IMX7_GPIO_I2C2_SDA IMX_GPIO_NR(1, 7)
static struct i2c_pads_info cl_som_imx7_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX7D_PAD_GPIO1_IO06__I2C2_SCL |
MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX7D_PAD_GPIO1_IO06__GPIO1_IO6 |
MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = CL_SOM_IMX7_GPIO_I2C2_SCL,
},
.sda = {
.i2c_mode = MX7D_PAD_GPIO1_IO07__I2C2_SDA |
MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX7D_PAD_GPIO1_IO07__GPIO1_IO7 |
MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = CL_SOM_IMX7_GPIO_I2C2_SDA,
},
};
/*
* cl_som_imx7_setup_i2c() - I2C pinmux configuration.
*/
static void cl_som_imx7_setup_i2c(void)
{
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &cl_som_imx7_i2c_pad_info2);
}
#else /* !CONFIG_SYS_I2C_MXC */
static void cl_som_imx7_setup_i2c(void) {}
#endif /* CONFIG_SYS_I2C_MXC */
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
#ifdef CONFIG_FSL_ESDHC
#define CL_SOM_IMX7_GPIO_USDHC3_PWR IMX_GPIO_NR(6, 11)
static struct fsl_esdhc_cfg cl_som_imx7_usdhc_cfg[3] = {
{USDHC1_BASE_ADDR, 0, 4},
{USDHC3_BASE_ADDR},
};
int board_mmc_init(bd_t *bis)
{
int i, ret;
/*
* According to the board_mmc_init() the following map is done:
* (U-boot device node) (Physical Port)
* mmc0 USDHC1
* mmc2 USDHC3 (eMMC)
*/
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
cl_som_imx7_usdhc1_pads_set();
gpio_request(CL_SOM_IMX7_GPIO_USDHC1_CD, "usdhc1_cd");
cl_som_imx7_usdhc_cfg[0].sdhc_clk =
mxc_get_clock(MXC_ESDHC_CLK);
break;
case 1:
cl_som_imx7_usdhc3_emmc_pads_set();
gpio_request(CL_SOM_IMX7_GPIO_USDHC3_PWR, "usdhc3_pwr");
gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 0);
udelay(500);
gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 1);
cl_som_imx7_usdhc_cfg[1].sdhc_clk =
mxc_get_clock(MXC_ESDHC3_CLK);
break;
default:
printf("Warning: you configured more USDHC controllers "
"(%d) than supported by the board\n", i + 1);
return -EINVAL;
}
ret = fsl_esdhc_initialize(bis, &cl_som_imx7_usdhc_cfg[i]);
if (ret)
return ret;
}
return 0;
}
#endif /* CONFIG_FSL_ESDHC */
#ifdef CONFIG_FEC_MXC
#define CL_SOM_IMX7_ETH1_PHY_NRST IMX_GPIO_NR(1, 4)
/*
* cl_som_imx7_rgmii_rework() - Ethernet PHY configuration.
*/
static void cl_som_imx7_rgmii_rework(struct phy_device *phydev)
{
unsigned short val;
/* Ar8031 phy SmartEEE feature cause link status generates glitch,
* which cause ethernet link down/up issue, so disable SmartEEE
*/
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x3);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= ~(0x1 << 8);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= 0xffe3;
val |= 0x18;
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
/* introduce tx clock delay */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
val |= 0x0100;
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
}
int board_phy_config(struct phy_device *phydev)
{
cl_som_imx7_rgmii_rework(phydev);
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
/*
* cl_som_imx7_handle_mac_address() - set Ethernet MAC address environment.
*
* @env_var: MAC address environment variable
* @eeprom_bus: I2C bus of the environment EEPROM
*
* @return: 0 on success, < 0 on failure
*/
static int cl_som_imx7_handle_mac_address(char *env_var, uint eeprom_bus)
{
int ret;
unsigned char enetaddr[6];
ret = eth_env_get_enetaddr(env_var, enetaddr);
if (ret)
return 0;
ret = cl_eeprom_read_mac_addr(enetaddr, eeprom_bus);
if (ret)
return ret;
ret = is_valid_ethaddr(enetaddr);
if (!ret)
return -1;
return eth_env_set_enetaddr(env_var, enetaddr);
}
#define CL_SOM_IMX7_FEC_DEV_ID_PRI 0
int board_eth_init(bd_t *bis)
{
/* set Ethernet MAC address environment */
cl_som_imx7_handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS);
/* Ethernet interface pinmux configuration */
cl_som_imx7_phy1_rst_pads_set();
cl_som_imx7_fec1_pads_set();
/* PHY reset */
gpio_request(CL_SOM_IMX7_ETH1_PHY_NRST, "eth1_phy_nrst");
gpio_direction_output(CL_SOM_IMX7_ETH1_PHY_NRST, 0);
mdelay(10);
gpio_set_value(CL_SOM_IMX7_ETH1_PHY_NRST, 1);
/* MAC initialization */
return fecmxc_initialize_multi(bis, CL_SOM_IMX7_FEC_DEV_ID_PRI,
CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
}
/*
* cl_som_imx7_setup_fec() - Ethernet MAC 1 clock configuration.
* - ENET1 reference clock mode select.
* - ENET1_TX_CLK output driver is disabled when configured for ALT1.
*/
static void cl_som_imx7_setup_fec(void)
{
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
/* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
set_clk_enet(ENET_125MHZ);
}
#else /* !CONFIG_FEC_MXC */
static void cl_som_imx7_setup_fec(void) {}
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_SPI
static void cl_som_imx7_spi_init(void)
{
cl_som_imx7_espi1_pads_set();
}
#else /* !CONFIG_SPI */
static void cl_som_imx7_spi_init(void) {}
#endif /* CONFIG_SPI */
int board_early_init_f(void)
{
cl_som_imx7_uart1_pads_set();
cl_som_imx7_usb_otg1_pads_set();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
cl_som_imx7_setup_i2c();
cl_som_imx7_setup_fec();
cl_som_imx7_spi_init();
return 0;
}
#ifdef CONFIG_POWER
#define I2C_PMIC 0
int power_init_board(void)
{
struct pmic *p;
int ret;
unsigned int reg, rev_id;
ret = power_pfuze3000_init(I2C_PMIC);
if (ret)
return ret;
p = pmic_get("PFUZE3000");
ret = pmic_probe(p);
if (ret)
return ret;
pmic_reg_read(p, PFUZE3000_DEVICEID, &reg);
pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
/* disable Low Power Mode during standby mode */
pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
return 0;
}
#endif /* CONFIG_POWER */
/*
* cl_som_imx7_setup_wdog() - watchdog configuration.
* - Output WDOG_B signal to reset external pmic.
* - Suspend the watchdog timer during low-power modes.
*/
void cl_som_imx7_setup_wdog(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
cl_som_imx7_wdog_pads_set();
set_wdog_reset(wdog);
/*
* Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
* since we use PMIC_PWRON to reset the board.
*/
clrsetbits_le16(&wdog->wcr, 0, 0x10);
}
int board_late_init(void)
{
env_set("board_name", "CL-SOM-iMX7");
cl_som_imx7_setup_wdog();
return 0;
}
int checkboard(void)
{
char *mode;
if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT))
mode = "secure";
else
mode = "non-secure";
printf("Board: CL-SOM-iMX7 in %s mode\n", mode);
return 0;
}

46
board/compulab/cl-som-imx7/common.c Normal file
View file

@ -0,0 +1,46 @@
/*
* SPL/U-Boot common functions for CompuLab CL-SOM-iMX7 module
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fsl_esdhc.h>
#include <asm-generic/gpio.h>
#include "common.h"
#ifdef CONFIG_SPI
#define CL_SOM_IMX7_GPIO_SPI_CS IMX_GPIO_NR(4, 19)
int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
{
return CL_SOM_IMX7_GPIO_SPI_CS;
}
#endif /* CONFIG_SPI */
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
switch (cfg->esdhc_base) {
case USDHC1_BASE_ADDR:
ret = !gpio_get_value(CL_SOM_IMX7_GPIO_USDHC1_CD);
break;
case USDHC3_BASE_ADDR:
ret = 1; /* Assume uSDHC3 emmc is always present */
break;
}
return ret;
}
#endif /* CONFIG_FSL_ESDHC */

32
board/compulab/cl-som-imx7/common.h Normal file
View file

@ -0,0 +1,32 @@
/*
* SPL/U-Boot common header file for CompuLab CL-SOM-iMX7 module
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#define PADS_SET_PROT(pads_array) void cl_som_imx7_##pads_array##_set(void)
#ifdef CONFIG_FSL_ESDHC
#define CL_SOM_IMX7_GPIO_USDHC1_CD IMX_GPIO_NR(5, 0)
PADS_SET_PROT(usdhc1_pads);
#endif /* CONFIG_FSL_ESDHC */
PADS_SET_PROT(uart1_pads);
#ifdef CONFIG_SPI
PADS_SET_PROT(espi1_pads);
#endif /* CONFIG_SPI */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_FSL_ESDHC
PADS_SET_PROT(usdhc3_emmc_pads);
#endif /* CONFIG_FSL_ESDHC */
#ifdef CONFIG_FEC_MXC
PADS_SET_PROT(phy1_rst_pads);
PADS_SET_PROT(fec1_pads);
#endif /* CONFIG_FEC_MXC */
PADS_SET_PROT(usb_otg1_pads);
PADS_SET_PROT(wdog_pads);
#endif /* !CONFIG_SPL_BUILD */

142
board/compulab/cl-som-imx7/mux.c Normal file
View file

@ -0,0 +1,142 @@
/*
* SPL/U-Boot mux functions for CompuLab CL-SOM-iMX7 module
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/arch-mx7/mx7-pins.h>
#define PADS_SET(pads_array) \
void cl_som_imx7_##pads_array##_set(void) \
{ \
imx_iomux_v3_setup_multiple_pads(pads_array, ARRAY_SIZE(pads_array)); \
}
#ifdef CONFIG_FSL_ESDHC
#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS | PAD_CTL_PUE | \
PAD_CTL_PUS_PU47KOHM)
static iomux_v3_cfg_t const usdhc1_pads[] = {
MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
PADS_SET(usdhc1_pads)
#endif /* CONFIG_FSL_ESDHC */
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
static iomux_v3_cfg_t const uart1_pads[] = {
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
PADS_SET(uart1_pads)
#ifdef CONFIG_SPI
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SRE_SLOW | \
PAD_CTL_DSE_3P3V_32OHM)
#define GPIO_PAD_CTRL (PAD_CTL_PUS_PU5KOHM | PAD_CTL_PUE | \
PAD_CTL_SRE_SLOW)
static iomux_v3_cfg_t const espi1_pads[] = {
MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
};
PADS_SET(espi1_pads)
#endif /* CONFIG_SPI */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_FSL_ESDHC
static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
PADS_SET(usdhc3_emmc_pads)
#endif /* CONFIG_FSL_ESDHC */
#ifdef CONFIG_FEC_MXC
#define ENET_PAD_CTRL (PAD_CTL_PUS_PD100KOHM | PAD_CTL_DSE_3P3V_49OHM)
#define ENET_PAD_CTRL_MII (PAD_CTL_PUS_PU5KOHM)
static iomux_v3_cfg_t const phy1_rst_pads[] = {
/* PHY1 RST */
MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
};
PADS_SET(phy1_rst_pads)
static iomux_v3_cfg_t const fec1_pads[] = {
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
};
PADS_SET(fec1_pads)
#endif /* CONFIG_FEC_MXC */
static iomux_v3_cfg_t const usb_otg1_pads[] = {
MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
PADS_SET(usb_otg1_pads)
static iomux_v3_cfg_t const wdog_pads[] = {
MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
};
PADS_SET(wdog_pads)
#endif /* !CONFIG_SPL_BUILD */

211
board/compulab/cl-som-imx7/spl.c Normal file
View file

@ -0,0 +1,211 @@
/*
* SPL board functions for CompuLab CL-SOM-iMX7 module
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
#include <fsl_esdhc.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/arch-mx7/mx7-pins.h>
#include <asm/arch-mx7/clock.h>
#include <asm/arch-mx7/mx7-ddr.h>
#include "common.h"
#ifdef CONFIG_FSL_ESDHC
static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
USDHC1_BASE_ADDR, 0, 4};
int board_mmc_init(bd_t *bis)
{
cl_som_imx7_usdhc1_pads_set();
cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg);
}
#endif /* CONFIG_FSL_ESDHC */
static iomux_v3_cfg_t const led_pads[] = {
MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM |
PAD_CTL_PUE | PAD_CTL_SRE_SLOW)
};
static struct ddrc cl_som_imx7_spl_ddrc_regs_val = {
.init1 = 0x00690000,
.init0 = 0x00020083,
.init3 = 0x09300004,
.init4 = 0x04080000,
.init5 = 0x00100004,
.rankctl = 0x0000033F,
.dramtmg1 = 0x0007020E,
.dramtmg2 = 0x03040407,
.dramtmg3 = 0x00002006,
.dramtmg4 = 0x04020305,
.dramtmg5 = 0x03030202,
.dramtmg8 = 0x00000803,
.zqctl0 = 0x00810021,
.dfitmg0 = 0x02098204,
.dfitmg1 = 0x00030303,
.dfiupd0 = 0x80400003,
.dfiupd1 = 0x00100020,
.dfiupd2 = 0x80100004,
.addrmap4 = 0x00000F0F,
.odtcfg = 0x06000604,
.odtmap = 0x00000001,
};
static struct ddrc_mp cl_som_imx7_spl_ddrc_mp_val = {
.pctrl_0 = 0x00000001,
};
static struct ddr_phy cl_som_imx7_spl_ddr_phy_regs_val = {
.phy_con0 = 0x17420F40,
.phy_con1 = 0x10210100,
.phy_con4 = 0x00060807,
.mdll_con0 = 0x1010007E,
.drvds_con0 = 0x00000D6E,
.cmd_sdll_con0 = 0x00000010,
.offset_lp_con0 = 0x0000000F,
};
struct mx7_calibration cl_som_imx7_spl_calib_param = {
.num_val = 5,
.values = {
0x0E407304,
0x0E447304,
0x0E447306,
0x0E447304,
0x0E407304,
},
};
static void cl_som_imx7_spl_dram_cfg_size(u32 ram_size)
{
switch (ram_size) {
case SZ_256M:
cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01041001;
cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000014;
cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00151515;
cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x03030303;
cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0303;
cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C;
cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
break;
case SZ_512M:
cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000015;
cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00161616;
cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0404;
cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C;
cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
break;
case SZ_1G:
cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000016;
cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00171717;
cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F040404;
cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A;
cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x02020202;
break;
case SZ_2G:
cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x0040005E;
cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E110A;
cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000018;
cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00181818;
cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x04040404;
cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A;
cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
break;
}
mx7_dram_cfg(&cl_som_imx7_spl_ddrc_regs_val,
&cl_som_imx7_spl_ddrc_mp_val,
&cl_som_imx7_spl_ddr_phy_regs_val,
&cl_som_imx7_spl_calib_param);
}
static void cl_som_imx7_spl_dram_cfg(void)
{
ulong ram_size_test, ram_size = 0;
for (ram_size = SZ_2G; ram_size >= SZ_256M; ram_size >>= 1) {
cl_som_imx7_spl_dram_cfg_size(ram_size);
ram_size_test = get_ram_size((long int *)PHYS_SDRAM, ram_size);
if (ram_size_test == ram_size)
break;
}
if (ram_size < SZ_256M) {
puts("!!!ERROR!!! DRAM detection failed!!!\n");
hang();
}
}
#ifdef CONFIG_SPL_SPI_SUPPORT
static void cl_som_imx7_spl_spi_init(void)
{
cl_som_imx7_espi1_pads_set();
}
#else /* !CONFIG_SPL_SPI_SUPPORT */
static void cl_som_imx7_spl_spi_init(void) {}
#endif /* CONFIG_SPL_SPI_SUPPORT */
void board_init_f(ulong dummy)
{
imx_iomux_v3_setup_multiple_pads(led_pads, 1);
/* setup AIPS and disable watchdog */
arch_cpu_init();
/* setup GP timer */
timer_init();
cl_som_imx7_spl_spi_init();
cl_som_imx7_uart1_pads_set();
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
/* DRAM detection */
cl_som_imx7_spl_dram_cfg();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
void spl_board_init(void)
{
u32 boot_device = spl_boot_device();
if (boot_device == BOOT_DEVICE_SPI)
puts("Booting from SPI flash\n");
else if (boot_device == BOOT_DEVICE_MMC1)
puts("Booting from SD card\n");
else
puts("Unknown boot device\n");
}
void board_boot_order(u32 *spl_boot_list)
{
spl_boot_list[0] = spl_boot_device();
switch (spl_boot_list[0]) {
case BOOT_DEVICE_SPI:
spl_boot_list[1] = BOOT_DEVICE_MMC1;
break;
case BOOT_DEVICE_MMC1:
spl_boot_list[1] = BOOT_DEVICE_SPI;
break;
}
}

5
board/congatec/cgtqmx6eval/cgtqmx6eval.c
View file

@ -24,6 +24,7 @@
#include <mmc.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <linux/fb.h>
@ -683,8 +684,6 @@ int overwrite_console(void)
int board_early_init_f(void)
{
setup_iomux_uart();
setup_display();
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
@ -702,6 +701,8 @@ int board_init(void)
else
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
setup_display();
#ifdef CONFIG_SATA
setup_sata();
#endif

12
board/dhelectronics/dh_imx6/Kconfig Normal file
View file

@ -0,0 +1,12 @@
if TARGET_DHCOMIMX6
config SYS_BOARD
default "dh_imx6"
config SYS_VENDOR
default "dhelectronics"
config SYS_CONFIG_NAME
default "dh_imx6"
endif

7
board/dhelectronics/dh_imx6/MAINTAINERS Normal file
View file

@ -0,0 +1,7 @@
DH_IMX6 BOARD
M: Andreas Geisreiter <ageisreiter@dh-electronics.de>, Ludwig Zenz <lzenz@dh-electronics.de>
S: Maintained
F: board/dhelectronics/dh_imx6/
F: include/configs/dh_imx6.h
F: configs/dh_mx6q_defconfig
F: configs/dh_mx6dl_defconfig

11
board/dhelectronics/dh_imx6/Makefile Normal file
View file

@ -0,0 +1,11 @@
#
# Copyright (C) 2017 Marek Vasut <marex@denx.de>
#
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
obj-y := dh_imx6_spl.o
else
obj-y := dh_imx6.o
endif

437
board/dhelectronics/dh_imx6/dh_imx6.c Normal file
View file

@ -0,0 +1,437 @@
/*
* DHCOM DH-iMX6 PDK board support
*
* Copyright (C) 2017 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <errno.h>
#include <fsl_esdhc.h>
#include <fuse.h>
#include <i2c.h>
#include <miiphy.h>
#include <mmc.h>
#include <net.h>
#include <netdev.h>
#include <usb.h>
#include <usb/ehci-ci.h>
DECLARE_GLOBAL_DATA_PTR;
#define I2C_PAD_CTRL \
(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define EEPROM_I2C_ADDRESS 0x50
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
static struct i2c_pads_info dh6sdl_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static struct i2c_pads_info dh6sdl_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
static struct i2c_pads_info dh6sdl_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
#ifdef CONFIG_FEC_MXC
static void eth_phy_reset(void)
{
/* Reset PHY */
gpio_direction_output(IMX_GPIO_NR(5, 0) , 0);
udelay(500);
gpio_set_value(IMX_GPIO_NR(5, 0), 1);
/* Enable VIO */
gpio_direction_output(IMX_GPIO_NR(1, 7) , 0);
/*
* KSZ9021 PHY needs at least 10 mSec after PHY reset
* is released to stabilize
*/
mdelay(10);
}
static int setup_fec_clock(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
/* set gpr1[21] to select anatop clock */
clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 << 21);
return enable_fec_anatop_clock(0, ENET_50MHZ);
}
int board_eth_init(bd_t *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
setup_fec_clock();
eth_phy_reset();
bus = fec_get_miibus(base, -1);
if (!bus)
return -EINVAL;
/* Scan PHY 0 */
phydev = phy_find_by_mask(bus, 0xf, PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
printf("Ethernet PHY not found!\n");
return -EINVAL;
}
return fec_probe(bis, -1, base, bus, phydev);
}
#endif
#ifdef CONFIG_FSL_ESDHC
#define USDHC2_CD_GPIO IMX_GPIO_NR(6, 16)
#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 8)
static struct fsl_esdhc_cfg usdhc_cfg[3] = {
{ USDHC2_BASE_ADDR },
{ USDHC3_BASE_ADDR },
{ USDHC4_BASE_ADDR },
};
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
switch (cfg->esdhc_base) {
case USDHC2_BASE_ADDR:
return gpio_get_value(USDHC2_CD_GPIO);
case USDHC3_BASE_ADDR:
return !gpio_get_value(USDHC3_CD_GPIO);
case USDHC4_BASE_ADDR:
return 1; /* eMMC/uSDHC4 is always present */
}
return 0;
}
int board_mmc_init(bd_t *bis)
{
int i, ret;
/*
* According to the board_mmc_init() the following map is done:
* (U-Boot device node) (Physical Port)
* mmc0 SD interface
* mmc1 micro SD
* mmc2 eMMC
*/
gpio_direction_input(USDHC2_CD_GPIO);
gpio_direction_input(USDHC3_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
if (ret)
return ret;
}
return 0;
}
#endif
#ifdef CONFIG_USB_EHCI_MX6
static void setup_usb(void)
{
/*
* Set daisy chain for otg_pin_id on MX6Q.
* For MX6DL, this bit is reserved.
*/
imx_iomux_set_gpr_register(1, 13, 1, 0);
}
int board_usb_phy_mode(int port)
{
return USB_INIT_HOST;
}
/* Use only Port 1 == DHCOM USB Host 1 */
int board_ehci_hcd_init(int port)
{
if (port == 1)
return 0;
else
return -ENODEV;
}
int board_ehci_power(int port, int on)
{
switch (port) {
case 0:
break;
case 1:
gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
break;
default:
printf("MXC USB port %d not yet supported\n", port);
return -EINVAL;
}
return 0;
}
#endif
static int setup_dhcom_mac_from_fuse(void)
{
unsigned char enetaddr[6];
int ret;
ret = eth_env_get_enetaddr("ethaddr", enetaddr);
if (ret) /* ethaddr is already set */
return 0;
imx_get_mac_from_fuse(0, enetaddr);
if (is_valid_ethaddr(enetaddr)) {
eth_env_set_enetaddr("ethaddr", enetaddr);
return 0;
}
ret = i2c_set_bus_num(2);
if (ret) {
printf("Error switching I2C bus!\n");
return ret;
}
ret = i2c_read(EEPROM_I2C_ADDRESS, 0xfa, 0x1, enetaddr, 0x6);
if (ret) {
printf("Error reading configuration EEPROM!\n");
return ret;
}
if (is_valid_ethaddr(enetaddr))
eth_env_set_enetaddr("ethaddr", enetaddr);
return 0;
}
int board_early_init_f(void)
{
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif
return 0;
}
#ifdef CONFIG_MXC_SPI
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
if (bus == 0 && cs == 0)
return IMX_GPIO_NR(2, 30);
else
return -1;
}
#endif
int board_init(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* Enable eim_slow clocks */
setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
#ifdef CONFIG_SYS_I2C_MXC
if (is_mx6dq()) {
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info2);
} else {
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info2);
}
#endif
#ifdef CONFIG_SATA
setup_sata();
#endif
setup_dhcom_mac_from_fuse();
return 0;
}
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
/* 8 bit bus width */
{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
#endif
#define HW_CODE_BIT_0 IMX_GPIO_NR(2, 19)
#define HW_CODE_BIT_1 IMX_GPIO_NR(6, 6)
#define HW_CODE_BIT_2 IMX_GPIO_NR(2, 16)
static int board_get_hwcode(void)
{
int hw_code;
gpio_direction_input(HW_CODE_BIT_0);
gpio_direction_input(HW_CODE_BIT_1);
gpio_direction_input(HW_CODE_BIT_2);
/* HW 100 + HW 200 = 00b; HW 300 = 01b */
hw_code = ((gpio_get_value(HW_CODE_BIT_2) << 2) |
(gpio_get_value(HW_CODE_BIT_1) << 1) |
gpio_get_value(HW_CODE_BIT_0)) + 2;
return hw_code;
}
int board_late_init(void)
{
u32 hw_code;
char buf[16];
hw_code = board_get_hwcode();
switch (get_cpu_type()) {
case MXC_CPU_MX6SOLO:
snprintf(buf, sizeof(buf), "imx6s-dhcom%1d", hw_code);
break;
case MXC_CPU_MX6DL:
snprintf(buf, sizeof(buf), "imx6dl-dhcom%1d", hw_code);
break;
case MXC_CPU_MX6D:
snprintf(buf, sizeof(buf), "imx6d-dhcom%1d", hw_code);
break;
case MXC_CPU_MX6Q:
snprintf(buf, sizeof(buf), "imx6q-dhcom%1d", hw_code);
break;
default:
snprintf(buf, sizeof(buf), "UNKNOWN%1d", hw_code);
break;
}
env_set("dhcom", buf);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
return 0;
}
int checkboard(void)
{
puts("Board: DHCOM i.MX6\n");
return 0;
}

399
board/dhelectronics/dh_imx6/dh_imx6_spl.c Normal file
View file

@ -0,0 +1,399 @@
/*
* DHCOM DH-iMX6 PDK SPL support
*
* Copyright (C) 2017 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/io.h>
#include <errno.h>
#include <fuse.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <mmc.h>
#include <spl.h>
#define ENET_PAD_CTRL \
(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS)
#define GPIO_PAD_CTRL \
(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
#define SPI_PAD_CTRL \
(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST)
#define UART_PAD_CTRL \
(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL \
(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
DECLARE_GLOBAL_DATA_PTR;
static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = {
.dram_sdclk_0 = 0x00020030,
.dram_sdclk_1 = 0x00020030,
.dram_cas = 0x00020030,
.dram_ras = 0x00020030,
.dram_reset = 0x00020030,
.dram_sdcke0 = 0x00003000,
.dram_sdcke1 = 0x00003000,
.dram_sdba2 = 0x00000000,
.dram_sdodt0 = 0x00003030,
.dram_sdodt1 = 0x00003030,
.dram_sdqs0 = 0x00000030,
.dram_sdqs1 = 0x00000030,
.dram_sdqs2 = 0x00000030,
.dram_sdqs3 = 0x00000030,
.dram_sdqs4 = 0x00000030,
.dram_sdqs5 = 0x00000030,
.dram_sdqs6 = 0x00000030,
.dram_sdqs7 = 0x00000030,
.dram_dqm0 = 0x00020030,
.dram_dqm1 = 0x00020030,
.dram_dqm2 = 0x00020030,
.dram_dqm3 = 0x00020030,
.dram_dqm4 = 0x00020030,
.dram_dqm5 = 0x00020030,
.dram_dqm6 = 0x00020030,
.dram_dqm7 = 0x00020030,
};
static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = {
.grp_ddr_type = 0x000C0000,
.grp_ddrmode_ctl = 0x00020000,
.grp_ddrpke = 0x00000000,
.grp_addds = 0x00000030,
.grp_ctlds = 0x00000030,
.grp_ddrmode = 0x00020000,
.grp_b0ds = 0x00000030,
.grp_b1ds = 0x00000030,
.grp_b2ds = 0x00000030,
.grp_b3ds = 0x00000030,
.grp_b4ds = 0x00000030,
.grp_b5ds = 0x00000030,
.grp_b6ds = 0x00000030,
.grp_b7ds = 0x00000030,
};
static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = {
.dram_sdclk_0 = 0x00020030,
.dram_sdclk_1 = 0x00020030,
.dram_cas = 0x00020030,
.dram_ras = 0x00020030,
.dram_reset = 0x00020030,
.dram_sdcke0 = 0x00003000,
.dram_sdcke1 = 0x00003000,
.dram_sdba2 = 0x00000000,
.dram_sdodt0 = 0x00003030,
.dram_sdodt1 = 0x00003030,
.dram_sdqs0 = 0x00000030,
.dram_sdqs1 = 0x00000030,
.dram_sdqs2 = 0x00000030,
.dram_sdqs3 = 0x00000030,
.dram_sdqs4 = 0x00000030,
.dram_sdqs5 = 0x00000030,
.dram_sdqs6 = 0x00000030,
.dram_sdqs7 = 0x00000030,
.dram_dqm0 = 0x00020030,
.dram_dqm1 = 0x00020030,
.dram_dqm2 = 0x00020030,
.dram_dqm3 = 0x00020030,
.dram_dqm4 = 0x00020030,
.dram_dqm5 = 0x00020030,
.dram_dqm6 = 0x00020030,
.dram_dqm7 = 0x00020030,
};
static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = {
.grp_ddr_type = 0x000C0000,
.grp_ddrmode_ctl = 0x00020000,
.grp_ddrpke = 0x00000000,
.grp_addds = 0x00000030,
.grp_ctlds = 0x00000030,
.grp_ddrmode = 0x00020000,
.grp_b0ds = 0x00000030,
.grp_b1ds = 0x00000030,
.grp_b2ds = 0x00000030,
.grp_b3ds = 0x00000030,
.grp_b4ds = 0x00000030,
.grp_b5ds = 0x00000030,
.grp_b6ds = 0x00000030,
.grp_b7ds = 0x00000030,
};
static const struct mx6_mmdc_calibration dhcom_mmdc_calib = {
.p0_mpwldectrl0 = 0x001F001F,
.p0_mpwldectrl1 = 0x001F001F,
.p1_mpwldectrl0 = 0x00440044,
.p1_mpwldectrl1 = 0x00440044,
.p0_mpdgctrl0 = 0x434B0350,
.p0_mpdgctrl1 = 0x034C0359,
.p1_mpdgctrl0 = 0x434B0350,
.p1_mpdgctrl1 = 0x03650348,
.p0_mprddlctl = 0x4436383B,
.p1_mprddlctl = 0x39393341,
.p0_mpwrdlctl = 0x35373933,
.p1_mpwrdlctl = 0x48254A36,
};
static const struct mx6_ddr3_cfg dhcom_mem_ddr = {
.mem_speed = 1600,
.density = 4,
.width = 64,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
.trcd = 1375,
.trcmin = 4875,
.trasmin = 3500,
};
static const struct mx6_ddr_sysinfo dhcom_ddr_info = {
/* width of data bus:0=16,1=32,2=64 */
.dsize = 2,
/* config for full 4GB range so that get_mem_size() works */
.cs_density = 32, /* 32Gb per CS */
.ncs = 1, /* single chip select */
.cs1_mirror = 0,
.rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
.rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
.walat = 1, /* Write additional latency */
.ralat = 5, /* Read additional latency */
.mif3_mode = 3, /* Command prediction working mode */
.bi_on = 1, /* Bank interleaving enabled */
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
};
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
writel(0x00C03F3F, &ccm->CCGR0);
writel(0x0030FC03, &ccm->CCGR1);
writel(0x0FFFC000, &ccm->CCGR2);
writel(0x3FF00000, &ccm->CCGR3);
writel(0x00FFF300, &ccm->CCGR4);
writel(0x0F0000C3, &ccm->CCGR5);
writel(0x000003FF, &ccm->CCGR6);
}
/* Board ID */
static iomux_v3_cfg_t const hwcode_pads[] = {
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
};
static void setup_iomux_boardid(void)
{
/* HW code pins: Setup alternate function and configure pads */
SETUP_IOMUX_PADS(hwcode_pads);
}
/* GPIO */
static iomux_v3_cfg_t const gpio_pads[] = {
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
};
static void setup_iomux_gpio(void)
{
SETUP_IOMUX_PADS(gpio_pads);
}
/* Ethernet */
static iomux_v3_cfg_t const enet_pads[] = {
IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* SMSC PHY Reset */
IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* ENET_VIO_GPIO */
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* ENET_Interrupt - (not used) */
IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_iomux_enet(void)
{
SETUP_IOMUX_PADS(enet_pads);
}
/* SD interface */
static iomux_v3_cfg_t const usdhc2_pads[] = {
IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
};
/* onboard microSD */
static iomux_v3_cfg_t const usdhc3_pads[] = {
IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
};
/* eMMC */
static iomux_v3_cfg_t const usdhc4_pads[] = {
IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
};
/* SD */
static void setup_iomux_sd(void)
{
SETUP_IOMUX_PADS(usdhc2_pads);
SETUP_IOMUX_PADS(usdhc3_pads);
SETUP_IOMUX_PADS(usdhc4_pads);
}
/* SPI */
static iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS0 */
IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
};
static void setup_iomux_spi(void)
{
SETUP_IOMUX_PADS(ecspi1_pads);
}
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
if (bus == 0 && cs == 0)
return IMX_GPIO_NR(2, 30);
else
return -1;
}
/* UART */
static iomux_v3_cfg_t const uart1_pads[] = {
IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static void setup_iomux_uart(void)
{
SETUP_IOMUX_PADS(uart1_pads);
}
/* USB */
static iomux_v3_cfg_t const usb_pads[] = {
IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_iomux_usb(void)
{
SETUP_IOMUX_PADS(usb_pads);
}
void board_init_f(ulong dummy)
{
/* setup AIPS and disable watchdog */
arch_cpu_init();
ccgr_init();
gpr_init();
/* setup GP timer */
timer_init();
setup_iomux_boardid();
setup_iomux_gpio();
setup_iomux_enet();
setup_iomux_sd();
setup_iomux_spi();
setup_iomux_uart();
setup_iomux_usb();
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
/* Start the DDR DRAM */
if (is_mx6dq())
mx6dq_dram_iocfg(dhcom_mem_ddr.width, &dhcom6dq_ddr_ioregs,
&dhcom6dq_grp_ioregs);
else
mx6sdl_dram_iocfg(dhcom_mem_ddr.width, &dhcom6sdl_ddr_ioregs,
&dhcom6sdl_grp_ioregs);
mx6_dram_cfg(&dhcom_ddr_info, &dhcom_mmdc_calib, &dhcom_mem_ddr);
/* Perform DDR DRAM calibration */
udelay(100);
mmdc_do_write_level_calibration(&dhcom_ddr_info);
mmdc_do_dqs_calibration(&dhcom_ddr_info);
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}

1
board/el/el6x/el6x.c
View file

@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <asm/arch/mx6-ddr.h>

1
board/embest/mx6boards/mx6boards.c
View file

@ -26,6 +26,7 @@
#include <asm/mach-imx/spi.h>
#include <asm/mach-imx/video.h>
#include <i2c.h>
#include <input.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>

3
board/engicam/icorem6_rqs/icorem6_rqs.c
View file

@ -27,8 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
{
/* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
return (devno == 3) ? 1 : 0;
return devno;
}
#endif

1
board/freescale/mx51evk/mx51evk.c
View file

@ -15,6 +15,7 @@
#include <asm/arch/clock.h>
#include <asm/mach-imx/mx5_video.h>
#include <i2c.h>
#include <input.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <power/pmic.h>

1
board/freescale/mx53loco/mx53loco.c
View file

@ -17,6 +17,7 @@
#include <asm/mach-imx/mx5_video.h>
#include <netdev.h>
#include <i2c.h>
#include <input.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>

1
board/freescale/mx6sabreauto/mx6sabreauto.c
View file

@ -24,6 +24,7 @@
#include <netdev.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/mach-imx/video.h>
#include <asm/arch/crm_regs.h>

9
board/freescale/mx6sabresd/mx6sabresd.c
View file

@ -10,6 +10,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/mach-imx/spi.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
@ -25,10 +26,12 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
#include <usb.h>
#include <usb/ehci-ci.h>
DECLARE_GLOBAL_DATA_PTR;
@ -620,9 +623,6 @@ int board_ehci_power(int port, int on)
int board_early_init_f(void)
{
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
@ -639,6 +639,9 @@ int board_init(void)
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
else
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif

1
board/ge/bx50v3/bx50v3.c
View file

@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <pwm.h>
#include <stdlib.h>
#include "vpd_reader.h"

1
board/logicpd/imx6/imx6logic.c
View file

@ -11,6 +11,7 @@
#include <common.h>
#include <miiphy.h>
#include <input.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/io.h>

15
board/solidrun/mx6cuboxi/mx6cuboxi.c
View file

@ -308,13 +308,8 @@ int board_ehci_hcd_init(int port)
int board_early_init_f(void)
{
int ret = 0;
setup_iomux_uart();
#ifdef CONFIG_VIDEO_IPUV3
ret = setup_display();
#endif
#ifdef CONFIG_CMD_SATA
setup_sata();
#endif
@ -322,15 +317,21 @@ int board_early_init_f(void)
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif
return ret;
return 0;
}
int board_init(void)
{
int ret = 0;
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
#ifdef CONFIG_VIDEO_IPUV3
ret = setup_display();
#endif
return ret;
}
static bool is_hummingboard(void)

1
board/technologic/ts4800/ts4800.c
View file

@ -18,6 +18,7 @@
#include <asm/arch/clock.h>
#include <asm/mach-imx/mx5_video.h>
#include <mmc.h>
#include <input.h>
#include <fsl_esdhc.h>
#include <mc13892.h>

9
board/toradex/apalis_imx6/apalis_imx6.c
View file

@ -30,6 +30,7 @@
#include <dm/platdata.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
#include <imx_thermal.h>
#include <linux/errno.h>
#include <malloc.h>
@ -756,10 +757,6 @@ int board_early_init_f(void)
#else
setup_iomux_dce_uart();
#endif
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
@ -781,6 +778,10 @@ int board_init(void)
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
#ifdef CONFIG_TDX_CMD_IMX_MFGR
(void) pmic_init();
#endif

8
board/toradex/colibri_imx6/colibri_imx6.c
View file

@ -29,6 +29,7 @@
#include <dm/platdata.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
#include <imx_thermal.h>
#include <linux/errno.h>
#include <malloc.h>
@ -630,9 +631,6 @@ int board_early_init_f(void)
ARRAY_SIZE(pwr_intb_pads));
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
@ -653,6 +651,10 @@ int board_init(void)
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
#ifdef CONFIG_TDX_CMD_IMX_MFGR
(void) pmic_init();
#endif

113
board/wandboard/wandboard.c
View file

@ -30,6 +30,8 @@
#include <phy.h>
#include <input.h>
#include <i2c.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@ -51,8 +53,11 @@ DECLARE_GLOBAL_DATA_PTR;
#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2)
#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9)
#define ETH_PHY_RESET IMX_GPIO_NR(3, 29)
#define ETH_PHY_AR8035_POWER IMX_GPIO_NR(7, 13)
#define REV_DETECTION IMX_GPIO_NR(2, 28)
static bool with_pmic;
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@ -107,6 +112,11 @@ static iomux_v3_cfg_t const enet_pads[] = {
IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const enet_ar8035_power_pads[] = {
/* AR8035 POWER */
IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const rev_detection_pad[] = {
IOMUX_PADS(PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
@ -120,6 +130,14 @@ static void setup_iomux_enet(void)
{
SETUP_IOMUX_PADS(enet_pads);
if (with_pmic) {
SETUP_IOMUX_PADS(enet_ar8035_power_pads);
/* enable AR8035 POWER */
gpio_direction_output(ETH_PHY_AR8035_POWER, 0);
}
/* wait until 3.3V of PHY and clock become stable */
mdelay(10);
/* Reset AR8031 PHY */
gpio_direction_output(ETH_PHY_RESET, 0);
mdelay(10);
@ -192,6 +210,7 @@ int board_mmc_init(bd_t *bis)
static int ar8031_phy_fixup(struct phy_device *phydev)
{
unsigned short val;
int mask;
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
@ -199,7 +218,12 @@ static int ar8031_phy_fixup(struct phy_device *phydev)
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= 0xffe3;
if (with_pmic)
mask = 0xffe7; /* AR8035 */
else
mask = 0xffe3; /* AR8031 */
val &= mask;
val |= 0x18;
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
@ -257,6 +281,40 @@ struct i2c_pads_info mx6dl_i2c2_pad_info = {
}
};
struct i2c_pads_info mx6q_i2c3_pad_info = {
.scl = {
.i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX6Q_PAD_GPIO_5__GPIO1_IO05
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(1, 5)
},
.sda = {
.i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX6Q_PAD_GPIO_16__GPIO7_IO11
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(7, 11)
}
};
struct i2c_pads_info mx6dl_i2c3_pad_info = {
.scl = {
.i2c_mode = MX6DL_PAD_GPIO_5__I2C3_SCL
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX6DL_PAD_GPIO_5__GPIO1_IO05
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(1, 5)
},
.sda = {
.i2c_mode = MX6DL_PAD_GPIO_16__I2C3_SDA
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gpio_mode = MX6DL_PAD_GPIO_16__GPIO7_IO11
| MUX_PAD_CTRL(I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(7, 11)
}
};
static iomux_v3_cfg_t const fwadapt_7wvga_pads[] = {
IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK),
IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* HSync */
@ -376,9 +434,6 @@ int board_eth_init(bd_t *bis)
int board_early_init_f(void)
{
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
#ifdef CONFIG_SATA
/* Only mx6q wandboard has SATA */
if (is_cpu_type(MXC_CPU_MX6Q))
@ -388,6 +443,31 @@ int board_early_init_f(void)
return 0;
}
#define PMIC_I2C_BUS 2
int power_init_board(void)
{
struct pmic *p;
u32 reg;
/* configure PFUZE100 PMIC */
power_pfuze100_init(PMIC_I2C_BUS);
p = pmic_get("PFUZE100");
if (p && !pmic_probe(p)) {
pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
with_pmic = true;
/* Set VGEN2 to 1.5V and enable */
pmic_reg_read(p, PFUZE100_VGEN2VOL, &reg);
reg &= ~(LDO_VOL_MASK);
reg |= (LDOA_1_50V | (1 << (LDO_EN)));
pmic_reg_write(p, PFUZE100_VGEN2VOL, reg);
}
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
@ -417,6 +497,14 @@ static bool is_revc1(void)
return false;
}
static bool is_revd1(void)
{
if (with_pmic)
return true;
else
return false;
}
int board_late_init(void)
{
#ifdef CONFIG_CMD_BMODE
@ -429,7 +517,9 @@ int board_late_init(void)
else
env_set("board_rev", "MX6DL");
if (is_revc1())
if (is_revd1())
env_set("board_name", "D1");
else if (is_revc1())
env_set("board_name", "C1");
else
env_set("board_name", "B1");
@ -444,10 +534,15 @@ int board_init(void)
#if defined(CONFIG_VIDEO_IPUV3)
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
if (is_mx6dq())
if (is_mx6dq()) {
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info);
else
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c3_pad_info);
} else {
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c3_pad_info);
}
setup_display();
#endif
return 0;
@ -455,7 +550,9 @@ int board_init(void)
int checkboard(void)
{
if (is_revc1())
if (is_revd1())
puts("Board: Wandboard rev D1\n");
else if (is_revc1())
puts("Board: Wandboard rev C1\n");
else
puts("Board: Wandboard rev B1\n");

54
configs/cl-som-imx7_defconfig Normal file
View file

@ -0,0 +1,54 @@
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_CL_SOM_IMX7=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="CL-SOM-iMX7 # "
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_OF_LIBFDT=y

51
configs/dh_imx6_defconfig Normal file
View file

@ -0,0 +1,51 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_DHCOMIMX6=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MXC=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

1
configs/imx6qdl_icore_mmc_defconfig
View file

@ -36,7 +36,6 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_LIST="imx6q-icore imx6dl-icore"
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_BLK is not set
CONFIG_SYS_I2C_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_SMSC=y

1
configs/imx6qdl_icore_rqs_defconfig
View file

@ -33,7 +33,6 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_LIST="imx6q-icore-rqs imx6dl-icore-rqs"
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_BLK is not set
CONFIG_SYS_I2C_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y

5
configs/mx25pdk_defconfig
View file

@ -14,7 +14,8 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FS_FAT=y
CONFIG_OF_LIBFDT=y

1
configs/mx53loco_defconfig
View file

@ -8,7 +8,6 @@ CONFIG_BOOTDELAY=1
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MMC=y

1
configs/mx6slevk_defconfig
View file

@ -12,6 +12,7 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set

1
configs/mx6slevk_spl_defconfig
View file

@ -20,6 +20,7 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y

1
configs/mx7ulp_evk_defconfig
View file

@ -4,6 +4,7 @@ CONFIG_TARGET_MX7ULP_EVK=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y

1
configs/wandboard_defconfig
View file

@ -15,6 +15,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y

30
doc/README.imx6
View file

@ -110,34 +110,8 @@ issue the command:
sudo ../imx_usb_loader/imx_usb -v u-boot.imx
Getting U-Boot when SPL support is active, it requires
two downloads. imx_usb_loader downloads the SPL into
OCRAM and starts it. SPL will check for a valid u-boot.img, and
because it is not found, it will wait for it using the y-modem
protocol via the console.
A first install is then possible by combining imx_usb_loader with
another tool such as kermit.
sudo ../imx_usb_loader/imx_usb -v SPL
kermit kermit_uboot
and kermit_uboot contains something like this (set line should be adjusted):
set line /dev/ttyUSB1
set speed 115200
SET CARRIER-WATCH OFF
set flow-control none
set handshake none
set prefixing all
set file type bin
set protocol ymodem
send u-boot.img
c
The last "c" command tells kermit (from ckermit package in most distros)
to switch from command line mode to communication mode, and when the
script is finished, the U-Boot prompt is shown in the same shell.
In order to load SPL and u-boot.img via imx_usb_loader tool,
please refer to doc/README.sdp.
3. Using Secure Boot on i.MX6 machines with SPL support
-------------------------------------------------------

2
doc/README.sdp
View file

@ -14,7 +14,7 @@ SoC's recovery mechanism is using.
The SDP protocol over USB is a USB HID class protocol. USB HID class
protocols allow to access a USB device without OS specific drivers. The
U-Boot implementation has primarly been tested using the open source
imx_loader utility (https://github.com/toradex/imx_loader).
imx_loader utility (https://github.com/boundarydevices/imx_usb_loader).
The host side utilities are typically capable to interpret the i.MX
specific image header (see doc/README.imximage). There are extensions

8
drivers/pci/pcie_imx.c
View file

@ -431,7 +431,7 @@ static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
/*
* Initial bus setup
*/
static int imx6_pcie_assert_core_reset(void)
static int imx6_pcie_assert_core_reset(bool prepare_for_boot)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
@ -459,7 +459,7 @@ static int imx6_pcie_assert_core_reset(void)
* If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
* indication that the bootloader activated the link.
*/
if (is_mx6dq()) {
if (is_mx6dq() && prepare_for_boot) {
u32 val, gpr1, gpr12;
gpr1 = readl(&iomuxc_regs->gpr[1]);
@ -605,7 +605,7 @@ static int imx_pcie_link_up(void)
uint32_t tmp;
int count = 0;
imx6_pcie_assert_core_reset();
imx6_pcie_assert_core_reset(false);
imx6_pcie_init_phy();
imx6_pcie_deassert_core_reset();
@ -687,7 +687,7 @@ void imx_pcie_init(void)
void imx_pcie_remove(void)
{
imx6_pcie_assert_core_reset();
imx6_pcie_assert_core_reset(true);
}
/* Probe function. */

1
include/configs/apalis_imx6.h
View file

@ -23,7 +23,6 @@
#ifdef CONFIG_SPL
#include "imx6_spl.h"
#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
#endif
#define CONFIG_CMDLINE_TAG

192
include/configs/cl-som-imx7.h Normal file
View file

@ -0,0 +1,192 @@
/*
* Copyright (C) 2015 CompuLab, Ltd.
*
* Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CL_SOM_IMX7_CONFIG_H
#define __CL_SOM_IMX7_CONFIG_H
#include "mx7_common.h"
#define CONFIG_DBG_MONITOR
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
#define CONFIG_BOARD_LATE_INIT
/* Uncomment to enable secure boot support */
/* #define CONFIG_SECURE_BOOT */
#define CONFIG_CSF_SIZE 0x4000
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
/* ENET1 */
#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
#undef CONFIG_BOOTM_NETBSD
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS
/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C2 /* Enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED 100000
#define SYS_I2C_BUS_SOM 0
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_BUS SYS_I2C_BUS_SOM
#define CONFIG_PCA953X
#define CONFIG_CMD_PCA953X
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
#undef CONFIG_SYS_AUTOLOAD
#undef CONFIG_EXTRA_ENV_SETTINGS
#undef CONFIG_BOOTCOMMAND
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTDELAY 3
#define CONFIG_SYS_AUTOLOAD "no"
#define CONFIG_EXTRA_ENV_SETTINGS \
"autoload=off\0" \
"script=boot.scr\0" \
"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${fdtfile};\0" \
"bootscript=echo Running bootscript from ${storagetype} ...; source ${loadaddr};\0" \
"storagebootcmd=echo Booting from ${storagetype} ...; run ${storagetype}args; run doboot;\0" \
"kernel=zImage\0" \
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdtfile=imx7d-sbc-imx7.dtb\0" \
"fdtaddr=0x83000000\0" \
"mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \
"usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \
"doboot=bootz ${loadaddr} - ${fdtaddr}\0" \
"mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/mmcblk${mmcblk}p2 rootwait rw\0" \
"mmcbootscript=" \
"if run mmc_config; then " \
"setenv storagetype mmc;" \
"setenv storagedev ${mmcdev}:${mmcpart};" \
"if run loadscript; then " \
"run bootscript; " \
"fi; " \
"fi;\0" \
"mmcboot=" \
"if run mmc_config; then " \
"setenv storagetype mmc;" \
"setenv storagedev ${mmcdev}:${mmcpart};" \
"if run loadkernel; then " \
"if run loadfdt; then " \
"run storagebootcmd;" \
"fi; " \
"fi; " \
"fi;\0" \
"sdbootscript=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; " \
"run mmcbootscript\0" \
"usbbootscript=setenv usbdev ${usbdev_def}; " \
"setenv storagetype usb;" \
"setenv storagedev ${usbdev}:${usbpart};" \
"if run loadscript; then " \
"run bootscript; " \
"fi; " \
"sdboot=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; run mmcboot\0" \
"emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \
"emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \
#define CONFIG_BOOTCOMMAND \
"echo SD boot attempt ...; run sdbootscript; run sdboot; " \
"echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
"echo USB boot attempt ...; run usbbootscript; "
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* SPI Flash support */
#define CONFIG_SPI
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
/* FLASH and environment organization */
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_OFFSET (768 * 1024)
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
/* MMC Config*/
#define CONFIG_FSL_USDHC
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#endif
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/* Uncomment to enable iMX thermal driver support */
/*#define CONFIG_IMX_THERMAL*/
/* SPL */
#include "imx7_spl.h"
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
#endif /* CONFIG_SPL_BUILD */
#endif /* __CONFIG_H */

1
include/configs/colibri_imx6.h
View file

@ -21,7 +21,6 @@
#ifdef CONFIG_SPL
#include "imx6_spl.h"
#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
#endif
#define CONFIG_CMDLINE_TAG

191
include/configs/dh_imx6.h Normal file
View file

@ -0,0 +1,191 @@
/*
* DHCOM DH-iMX6 PDK board configuration
*
* Copyright (C) 2017 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __DH_IMX6_CONFIG_H
#define __DH_IMX6_CONFIG_H
#include <asm/arch/imx-regs.h>
#include <config_distro_defaults.h>
#include "mx6_common.h"
/*
* SPI NOR layout:
* 0x00_0000-0x00_ffff ... U-Boot SPL
* 0x01_0000-0x0f_ffff ... U-Boot
* 0x10_0000-0x10_ffff ... U-Boot env #1
* 0x11_0000-0x11_ffff ... U-Boot env #2
* 0x12_0000-0x1f_ffff ... UNUSED
*/
/* SPL */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x11400
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_TARGET "u-boot-with-spl.imx"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_BZIP2
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/* Bootcounter */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_BOOTCOUNT_BE
/* FEC ethernet */
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_ARP_TIMEOUT 200UL
/* Fuses */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif
/* GPIO */
#define CONFIG_MXC_GPIO
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_SYS_MMC_ENV_DEV 2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */
/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif
/* SPI Flash Configs */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif
/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
#endif
/* Watchdog */
#define CONFIG_HW_WATCHDOG
#define CONFIG_IMX_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_TEXT_BASE 0x17800000
#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_addr=0x18000000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x10008000\0" \
"fdt_addr_r=0x13000000\0" \
"ramdisk_addr_r=0x18000000\0" \
"scriptaddr=0x14000000\0" \
"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
BOOTENV
#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 2) \
func(USB, usb, 1) \
func(SATA, sata, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#endif
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
/* Environment */
#define CONFIG_ENV_SIZE (16 * 1024)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET (1024 * 1024)
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
#endif /* __DH_IMX6_CONFIG_H */

61
include/configs/imx7_spl.h Normal file
View file

@ -0,0 +1,61 @@
/*
* SPL definitions for the i.MX7 SPL
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __IMX7_SPL_CONFIG_H
#define __IMX7_SPL_CONFIG_H
#ifdef CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
/*
* see figure 6-22 in i.MX 7Dual/Solo Reference manuals:
* - IMX7D/S OCRAM free area RAM (OCRAM) is from 0x00910000 to
* 0x00946C00.
* - Set the stack at the end of the free area section, at 0x00946BB8.
* - The BOOT ROM loads what they consider the firmware image
* which consists of a 4K header in front of us that contains the IVT, DCD
* and some padding thus 'our' max size is really 0x00946BB8 - 0x00911000.
* 64KB is more then enough for the SPL.
*/
#define CONFIG_SPL_TEXT_BASE 0x00911000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_STACK 0x00946BB8
/*
* Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
* SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
* boot media (given that boot media specific offset is configured properly).
*/
#define CONFIG_SPL_PAD_TO 0x11000
/* MMC support */
#if defined(CONFIG_SPL_MMC_SUPPORT)
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
#endif
/* Define the payload for FAT/EXT support */
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
# ifdef CONFIG_OF_CONTROL
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
# else
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
# endif
#endif
#define CONFIG_SPL_BSS_START_ADDR 0x88200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_TEXT_BASE 0x87800000
#endif /* CONFIG_SPL */
#endif /* __IMX7_SPL_CONFIG_H */

11
include/configs/mx25pdk.h
View file

@ -58,8 +58,6 @@
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_DEV 0
/* U-Boot general configuration */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
@ -70,6 +68,9 @@
/* U-Boot commands */
/* Filesystem support */
#define CONFIG_FS_EXT4
/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR 0x1f
@ -138,11 +139,11 @@
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \

5
include/configs/mx6slevk.h
View file

@ -53,9 +53,9 @@
"ip_dyn=yes\0" \
"mmcdev=1\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"finduuid=part uuid mmc 1:2 uuid\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"root=PARTUUID=${uuid} rootwait rw\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
@ -63,6 +63,7 @@
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run finduuid; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \

1
include/configs/mx7ulp_evk.h
View file

@ -89,7 +89,6 @@
#define PHYS_SDRAM_SIZE SZ_1G
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_CMD_BOOTZ
#define CONFIG_LOADADDR 0x60800000

1
include/configs/topic_miami.h
View file

@ -134,7 +134,6 @@
#undef CONFIG_DISPLAY_BOARDINFO
/* Further tweaks to reduce image size */
#undef CONFIG_CMD_BOOTZ
#undef CONFIG_CMD_NET
#endif /* __CONFIG_TOPIC_MIAMI_H */

11
include/configs/wandboard.h
View file

@ -13,6 +13,7 @@
#include "mx6_common.h"
#include "imx6_spl.h"
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD_IMX6
@ -44,6 +45,12 @@
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
@ -102,6 +109,10 @@
"fi; " \
"fi\0" \
"findfdt="\
"if test $board_name = D1 && test $board_rev = MX6Q ; then " \
"setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
"if test $board_name = D1 && test $board_rev = MX6DL ; then " \
"setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
"setenv fdtfile imx6q-wandboard.dtb; fi; " \
"if test $board_name = C1 && test $board_rev = MX6DL ; then " \

4
include/configs/xpress.h
View file

@ -18,7 +18,7 @@
#define CONFIG_SYS_MALLOC_LEN (16 << 20)
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
@ -87,7 +87,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
"console=ttymxc6\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=undefined\0" \

1
include/usb/ehci-ci.h
View file

@ -280,6 +280,7 @@ struct usb_ehci {
int usb_phy_mode(int port);
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
int board_ehci_power(int port, int on);
int board_usb_phy_mode(int port);
#endif /* _EHCI_CI_H */