arm: K3: am654: Add support for boot device detection

AM654 allows for booting from primary or backup boot media.
Both media can be chosen individually based on switch settings.
ROM looks for a valid image in primary boot media, if not found
then looks in backup boot media. In order to pass this boot media
information to boot loader, ROM stores a value at a particular
address. Add support for reading this information and determining
the boot media correctly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Lokesh Vutla 2018-08-27 15:57:11 +05:30 committed by Tom Rini
parent f70b72e353
commit e00646099f
7 changed files with 148 additions and 2 deletions

View file

@ -8,7 +8,7 @@
#if defined(CONFIG_ARCH_OMAP2PLUS) \
|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
|| defined(CONFIG_EXYNOS4210)
|| defined(CONFIG_EXYNOS4210) || defined(CONFIG_ARCH_K3)
/* Platform-specific defines */
#include <asm/arch/spl.h>

View file

@ -40,4 +40,11 @@ config SYS_K3_MCU_SCRATCHPAD_SIZE
help
Describes the size of MCU Scratchpad RAM.
config SYS_K3_BOOT_PARAM_TABLE_INDEX
hex
default 0x41c7fbfc if SOC_K3_AM6
help
Address at which ROM stores the value which determines if SPL
is booted up by primary boot media or secondary boot media.
endif

View file

@ -7,11 +7,26 @@
*/
#include <common.h>
#include <asm/io.h>
#include <spl.h>
#include <asm/arch/hardware.h>
#ifdef CONFIG_SPL_BUILD
static void store_boot_index_from_rom(void)
{
u32 *boot_index = (u32 *)K3_BOOT_PARAM_TABLE_INDEX_VAL;
*boot_index = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
}
void board_init_f(ulong dummy)
{
/*
* Cannot delay this further as there is a chance that
* K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
*/
store_boot_index_from_rom();
/* Init DM early in-order to invoke system controller */
spl_early_init();
@ -19,9 +34,50 @@ void board_init_f(ulong dummy)
preloader_console_init();
}
static u32 __get_backup_bootmedia(u32 devstat)
{
u32 bkup_boot = (devstat & CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
switch (bkup_boot) {
case BACKUP_BOOT_DEVICE_USB:
return BOOT_DEVICE_USB;
case BACKUP_BOOT_DEVICE_UART:
return BOOT_DEVICE_UART;
case BACKUP_BOOT_DEVICE_ETHERNET:
return BOOT_DEVICE_ETHERNET;
case BACKUP_BOOT_DEVICE_MMC2:
return BOOT_DEVICE_MMC2;
case BACKUP_BOOT_DEVICE_SPI:
return BOOT_DEVICE_SPI;
case BACKUP_BOOT_DEVICE_HYPERFLASH:
return BOOT_DEVICE_HYPERFLASH;
case BACKUP_BOOT_DEVICE_I2C:
return BOOT_DEVICE_I2C;
};
return BOOT_DEVICE_RAM;
}
static u32 __get_primary_bootmedia(u32 devstat)
{
u32 bootmode = devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK;
if (bootmode == BOOT_DEVICE_OSPI || bootmode == BOOT_DEVICE_QSPI)
bootmode = BOOT_DEVICE_SPI;
return bootmode;
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_RAM;
u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL);
if (bootindex == K3_PRIMARY_BOOTMODE)
return __get_primary_bootmedia(devstat);
else
return __get_backup_bootmedia(devstat);
}
#endif

View file

@ -0,0 +1,23 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* K3: AM6 SoC definitions, structures etc.
*
* (C) Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*/
#ifndef __ASM_ARCH_AM6_HARDWARE_H
#define __ASM_ARCH_AM6_HARDWARE_H
#include <config.h>
#define CTRL_MMR0_BASE 0x00100000
#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK GENMASK(3, 0)
#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT 0
#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(6, 4)
#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT 4
/* MCU SCRATCHPAD usage */
#define K3_BOOT_PARAM_TABLE_INDEX_VAL CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
#endif /* __ASM_ARCH_AM6_HARDWARE_H */

View file

@ -0,0 +1,36 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef _ASM_ARCH_AM6_SPL_H_
#define _ASM_ARCH_AM6_SPL_H_
#define BOOT_DEVICE_RAM 0x00
#define BOOT_DEVICE_OSPI 0x01
#define BOOT_DEVICE_QSPI 0x02
#define BOOT_DEVICE_HYPERFLASH 0x03
#define BOOT_DEVICE_SPI 0x04
#define BOOT_DEVICE_I2C 0x05
#define BOOT_DEVICE_MMC2 0x06
#define BOOT_DEVICE_ETHERNET 0x07
#define BOOT_DEVICE_USB 0x08
#define BOOT_DEVICE_PCIE 0x09
#define BOOT_DEVICE_UART 0x0a
#define BOOT_DEVICE_NAND 0x0c
#define BOOT_DEVICE_MMC1 0x0d
#define BOOT_DEVICE_MMC2_2 0x0e
#define BACKUP_BOOT_DEVICE_RAM 0x0
#define BACKUP_BOOT_DEVICE_USB 0x1
#define BACKUP_BOOT_DEVICE_UART 0x2
#define BACKUP_BOOT_DEVICE_ETHERNET 0x3
#define BACKUP_BOOT_DEVICE_MMC2 0x4
#define BACKUP_BOOT_DEVICE_SPI 0x5
#define BACKUP_BOOT_DEVICE_HYPERFLASH 0x6
#define BACKUP_BOOT_DEVICE_I2C 0x7
#define K3_PRIMARY_BOOTMODE 0x0
#define K3_BACKUP_BOOTMODE 0x1
#endif

View file

@ -0,0 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef _ASM_ARCH_HARDWARE_H_
#define _ASM_ARCH_HARDWARE_H_
#ifdef CONFIG_SOC_K3_AM6
#include "am6_hardware.h"
#endif
#endif /* _ASM_ARCH_HARDWARE_H_ */

View file

@ -0,0 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_ARCH_SPL_H_
#ifdef CONFIG_SOC_K3_AM6
#include "am6_spl.h"
#endif
#endif /* _ASM_ARCH_SPL_H_ */