rockchip: dts: Add mipi dsi support for rk3399

Add dts config for mipi display, include vop, mipi controller, panel, backlight
. And Enable rk808 for lcd_3v3 in another patch.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This commit is contained in:
Eric Gao 2017-05-02 18:23:56 +08:00 committed by Simon Glass
parent 028d684901
commit df8fe99cf2
2 changed files with 148 additions and 0 deletions

View file

@ -66,6 +66,59 @@
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vccsys>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55
56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103
104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135
136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151
152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167
168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183
184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215
216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
pwms = <&pwm0 0 25000 0>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
pwm-delay-us = <10000>;
status = "disabled";
};
panel:panel {
compatible = "simple-panel";
power-supply = <&vcc33_lcd>;
backlight = <&backlight>;
/*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/
status = "disabled";
};
};
&emmc_phy {
@ -148,6 +201,7 @@
status = "okay";
vcc12-supply = <&vcc3v3_sys>;
regulators {
vcc33_lcd: SWITCH_REG2 {
regulator-always-on;
@ -158,6 +212,29 @@
};
};
&mipi_dsi {
status = "disabled";
rockchip,panel = <&panel>;
display-timings {
timing0 {
bits-per-pixel = <24>;
clock-frequency = <160000000>;
hfront-porch = <120>;
hsync-len = <20>;
hback-porch = <21>;
hactive = <1200>;
vfront-porch = <21>;
vsync-len = <3>;
vback-porch = <18>;
vactive = <1920>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {

View file

@ -1402,6 +1402,77 @@
status = "disabled";
};
vopl: vop@ff8f0000 {
u-boot,dm-pre-reloc;
compatible = "rockchip,rk3399-vop-lit";
reg = <0x0 0xff8f0000 0x0 0x3efc>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopl_out_mipi: endpoint@0 {
reg = <3>;
remote-endpoint = <&mipi_in_vopl>;
};
};
};
vopb: vop@ff900000 {
u-boot,dm-pre-reloc;
compatible = "rockchip,rk3399-vop-big";
reg = <0x0 0xff900000 0x0 0x3efc>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
#clock-cells = <0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopb_out_mipi: endpoint@0 {
reg = <3>;
remote-endpoint = <&mipi_in_vopb>;
};
};
};
mipi_dsi: mipi@ff960000 {
compatible = "rockchip,rk3399_mipi_dsi";
reg = <0x0 0xff960000 0x0 0x8000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
<&cru SCLK_DPHY_TX0_CFG>;
clock-names = "ref", "pclk", "phy_cfg";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
mipi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_mipi>;
};
mipi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_mipi>;
};
};
};
};
pinctrl: pinctrl {
u-boot,dm-pre-reloc;
compatible = "rockchip,rk3399-pinctrl";