Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'

arch/arm/cpu/arm720t/tegra-common/cpu.c

@@ -378,8 +378,7 @@ void clock_enable_coresight(int enable)
 void halt_avp(void)
 {
 	for (;;) {
-		writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \
+		writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29),
-			| HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)),
+		       FLOW_CTLR_HALT_COP_EVENTS);
-			FLOW_CTLR_HALT_COP_EVENTS);
 	}
 }

arch/arm/cpu/arm720t/tegra124/cpu.c

@@ -252,8 +252,8 @@ void start_cpu(u32 reset_vector)
 	tegra124_init_clocks();
 
 	/* Set power-gating timer multiplier */
-	clrbits_le32(&pmc->pmc_pwrgate_timer_mult, TIMER_MULT_MASK);
+	writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT),
-	setbits_le32(&pmc->pmc_pwrgate_timer_mult, MULT_8);
+	       &pmc->pmc_pwrgate_timer_mult);
 
 	enable_cpu_power_rail();
 	enable_cpu_clocks();

arch/arm/include/asm/arch-tegra/pmc.h

@@ -298,14 +298,25 @@ struct pmc_ctlr {
 #define PMC_XOFS_SHIFT	1
 #define PMC_XOFS_MASK	(0x3F << PMC_XOFS_SHIFT)
 
+#if defined(CONFIG_TEGRA114)
 #define TIMER_MULT_SHIFT	0
 #define TIMER_MULT_MASK		(3 << TIMER_MULT_SHIFT)
 #define TIMER_MULT_CPU_SHIFT	2
 #define TIMER_MULT_CPU_MASK	(3 << TIMER_MULT_CPU_SHIFT)
+#elif defined(CONFIG_TEGRA124)
+#define TIMER_MULT_SHIFT	0
+#define TIMER_MULT_MASK		(7 << TIMER_MULT_SHIFT)
+#define TIMER_MULT_CPU_SHIFT	3
+#define TIMER_MULT_CPU_MASK	(7 << TIMER_MULT_CPU_SHIFT)
+#endif
+
 #define MULT_1			0
 #define MULT_2			1
 #define MULT_4			2
 #define MULT_8			3
+#if defined(CONFIG_TEGRA124)
+#define MULT_16			4
+#endif
 
 #define AMAP_WRITE_SHIFT	20
 #define AMAP_WRITE_ON		(1 << AMAP_WRITE_SHIFT)

arch/arm/include/asm/arch-tegra/tegra.h

@@ -34,7 +34,12 @@
 #define NV_PA_PMC_BASE		(NV_PA_APB_MISC_BASE + 0xE400)
 #define NV_PA_EMC_BASE		(NV_PA_APB_MISC_BASE + 0xF400)
 #define NV_PA_FUSE_BASE		(NV_PA_APB_MISC_BASE + 0xF800)
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \
+	defined(CONFIG_TEGRA114)
 #define NV_PA_CSITE_BASE	0x70040000
+#else
+#define NV_PA_CSITE_BASE	0x70800000
+#endif
 #define TEGRA_USB_ADDR_MASK	0xFFFFC000
 
 #define NV_PA_SDRC_CS0		NV_PA_SDRAM_BASE

arch/arm/include/asm/arch-tegra114/tegra.h

@@ -17,6 +17,8 @@
 #ifndef _TEGRA114_H_
 #define _TEGRA114_H_
 
+#define CONFIG_TEGRA114
+
 #define NV_PA_SDRAM_BASE	0x80000000	/* 0x80000000 for real T114 */
 #define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
 

arch/arm/include/asm/arch-tegra124/tegra.h

@@ -8,6 +8,8 @@
 #ifndef _TEGRA124_H_
 #define _TEGRA124_H_
 
+#define CONFIG_TEGRA124
+
 #define NV_PA_SDRAM_BASE	0x80000000
 #define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
 #define NV_PA_MC_BASE		0x70019000	/* Mem Ctlr regs (MCB, etc.) */

arch/arm/include/asm/arch-tegra20/tegra.h

@@ -8,6 +8,8 @@
 #ifndef _TEGRA20_H_
 #define _TEGRA20_H_
 
+#define CONFIG_TEGRA20
+
 #define NV_PA_SDRAM_BASE	0x00000000
 
 #include <asm/arch-tegra/tegra.h>

arch/arm/include/asm/arch-tegra30/tegra.h

@@ -17,6 +17,8 @@
 #ifndef _TEGRA30_H_
 #define _TEGRA30_H_
 
+#define CONFIG_TEGRA30
+
 #define NV_PA_SDRAM_BASE	0x80000000	/* 0x80000000 for real T30 */
 
 #include <asm/arch-tegra/tegra.h>

include/configs/tegra-common-post.h

@@ -66,27 +66,63 @@
 #define BOOT_TARGETS_DHCP ""
 #endif
 
+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
+#define BOOTCMDS_PXE \
+	"bootcmd_pxe=" \
+		BOOTCMD_INIT_USB \
+		"dhcp; " \
+		"if pxe get; then " \
+			"pxe boot; " \
+		"fi\0"
+#define BOOT_TARGETS_PXE "pxe"
+#else
+#define BOOTCMDS_PXE ""
+#define BOOT_TARGETS_PXE ""
+#endif
+
 #define BOOTCMDS_COMMON \
 	"rootpart=1\0" \
 	\
+	"do_script_boot="                                                 \
+		"load ${devtype} ${devnum}:${rootpart} "                  \
+			"${scriptaddr} ${prefix}${script}; "              \
+		"source ${scriptaddr}\0"                                  \
+	\
 	"script_boot="                                                    \
-		"if load ${devtype} ${devnum}:${rootpart} "               \
+		"for script in ${boot_scripts}; do "                      \
-				"${scriptaddr} ${prefix}${script}; then " \
+			"if test -e ${devtype} ${devnum}:${rootpart} "    \
-			"echo ${script} found! Executing ...;"            \
+					"${prefix}${script}; then "       \
-			"source ${scriptaddr};"                           \
+				"echo Found U-Boot script "               \
-		"fi;\0"                                                   \
+					"${prefix}${script}; "            \
+				"run do_script_boot; "                    \
+				"echo SCRIPT FAILED: continuing...; "     \
+			"fi; "                                            \
+		"done\0"                                                  \
+	\
+	"do_sysboot_boot="                                                \
+		"sysboot ${devtype} ${devnum}:${rootpart} any "           \
+			"${scriptaddr} ${prefix}extlinux.conf\0"          \
+	\
+	"sysboot_boot="                                                   \
+		"if test -e ${devtype} ${devnum}:${rootpart} "            \
+				"${prefix}extlinux.conf; then "           \
+			"echo Found extlinux config "                     \
+				"${prefix}extlinux.conf; "                \
+			"run do_sysboot_boot; "                           \
+			"echo SCRIPT FAILED: continuing...; "             \
+		"fi\0"                                                    \
 	\
 	"scan_boot="                                                      \
 		"echo Scanning ${devtype} ${devnum}...; "                 \
 		"for prefix in ${boot_prefixes}; do "                     \
-			"for script in ${boot_scripts}; do "              \
+			"run sysboot_boot; "                              \
-				"run script_boot; "                       \
+			"run script_boot; "                               \
-			"done; "                                          \
+		"done\0"                                                  \
-		"done;\0"                                                 \
 	\
 	"boot_targets=" \
 		BOOT_TARGETS_MMC " " \
 		BOOT_TARGETS_USB " " \
+		BOOT_TARGETS_PXE " " \
 		BOOT_TARGETS_DHCP " " \
 		"\0" \
 	\
@@ -96,7 +132,8 @@
 	\
 	BOOTCMDS_MMC \
 	BOOTCMDS_USB \
-	BOOTCMDS_DHCP
+	BOOTCMDS_DHCP \
+	BOOTCMDS_PXE
 
 #define CONFIG_BOOTCOMMAND \
 	"set usb_need_init; " \

include/configs/tegra-common.h

@@ -29,7 +29,6 @@
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 
 /* Environment */
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
@@ -69,33 +68,20 @@
 #undef CONFIG_CMD_NET		/* network support */
 
 /* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
 
 /* turn on commonly used storage-related commands */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_PART
 
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT		V_PROMPT
 /*
  * Increasing the size of the IO buffer as default nfsargs size is more
@@ -133,8 +119,6 @@
 #define CONFIG_TEGRA_GPIO
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
 
 /* Defines for SPL */
 #define CONFIG_SPL
@@ -157,4 +141,8 @@
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CRC32_VERIFY
 
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
 #endif /* _TEGRA_COMMON_H_ */

include/configs/tegra114-common.h

@@ -26,11 +26,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA114			/* in a NVidia Tegra114 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -51,6 +46,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -68,6 +66,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"ramdisk_addr_r=0x82100000\0"
@@ -83,5 +82,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA114_COMMON_H_ */

include/configs/tegra124-common.h

@@ -18,11 +18,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA124			/* is an NVIDIA Tegra124 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -79,5 +74,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA124_COMMON_H_ */

include/configs/tegra20-common.h

@@ -24,11 +24,6 @@
  */
 #define V_NS16550_CLK		216000000	/* 216MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA20				/* in a NVidia Tegra20 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x00408000	/* def. location for kernel */
 
@@ -49,6 +44,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -66,6 +64,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x10000000\0" \
+	"pxefile_addr_r=0x10100000\0" \
 	"kernel_addr_r=0x01000000\0" \
 	"fdt_addr_r=0x02000000\0" \
 	"ramdisk_addr_r=0x02100000\0"
@@ -96,6 +95,7 @@
  */
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	10
 #define CONFIG_EHCI_IS_TDI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* Total I2C ports on Tegra20 */
 #define TEGRA_I2C_NUM_CONTROLLERS	4

include/configs/tegra30-common.h

@@ -23,11 +23,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA30			/* in a NVidia Tegra30 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -48,6 +43,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -65,6 +63,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"ramdisk_addr_r=0x82100000\0"
@@ -80,5 +79,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA30_COMMON_H_ */