mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
imx: nandbcb: add support for i.MX7
Add support for updating FCB/DBBT on i.MX7: - additional new fields in FCB structure - Leverage hardware BCH/randomizer for writing FCB Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
This commit is contained in:
parent
9ab5f221a5
commit
dad30dd72b
3 changed files with 103 additions and 46 deletions
|
@ -106,6 +106,18 @@ struct fcb_block {
|
|||
|
||||
/* The swap position of main area in spare area */
|
||||
u32 spare_offset;
|
||||
|
||||
/* Actual for iMX7 only */
|
||||
u32 onfi_sync_enable;
|
||||
u32 onfi_sync_speed;
|
||||
u32 onfi_sync_nand_data;
|
||||
u32 reserved2[6];
|
||||
u32 disbbm_search;
|
||||
u32 disbbm_search_limit;
|
||||
u32 reserved3[15];
|
||||
u32 read_retry_enable;
|
||||
u32 reserved4[1];
|
||||
u32 fill_to_1024[183];
|
||||
};
|
||||
|
||||
#endif /* _IMX_NAND_BCB_H_ */
|
||||
|
|
|
@ -82,7 +82,7 @@ config CMD_NANDBCB
|
|||
bool "i.MX6 NAND Boot Control Block(BCB) command"
|
||||
depends on NAND && CMD_MTDPARTS
|
||||
select BCH if MX6UL || MX6ULL
|
||||
default y if ARCH_MX6 && NAND_MXS
|
||||
default y if (ARCH_MX6 && NAND_MXS) || (ARCH_MX7 && NAND_MXS)
|
||||
help
|
||||
Unlike normal 'nand write/erase' commands, this command update
|
||||
Boot Control Block(BCB) for i.MX6 platform NAND IP's.
|
||||
|
|
|
@ -17,6 +17,7 @@
|
|||
#include <linux/bch.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/mach-imx/imx-nandbcb.h>
|
||||
#include <asm/mach-imx/imximage.cfg>
|
||||
#include <mxs_nand.h>
|
||||
|
@ -131,26 +132,36 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
|
|||
{
|
||||
struct nand_chip *chip = mtd_to_nand(mtd);
|
||||
struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
|
||||
struct mxs_nand_layout l;
|
||||
|
||||
mxs_nand_get_layout(mtd, &l);
|
||||
|
||||
fcb->fingerprint = FCB_FINGERPRINT;
|
||||
fcb->version = FCB_VERSION_1;
|
||||
|
||||
fcb->pagesize = mtd->writesize;
|
||||
fcb->oob_pagesize = mtd->writesize + mtd->oobsize;
|
||||
fcb->sectors = mtd->erasesize / mtd->writesize;
|
||||
|
||||
/* Divide ECC strength by two and save the value into FCB structure. */
|
||||
fcb->ecc_level = nand_info->bch_geometry.ecc_strength >> 1;
|
||||
|
||||
fcb->ecc_type = fcb->ecc_level;
|
||||
fcb->meta_size = l.meta_size;
|
||||
fcb->nr_blocks = l.nblocks;
|
||||
fcb->ecc_nr = l.data0_size;
|
||||
fcb->ecc_level = l.ecc0;
|
||||
fcb->ecc_size = l.datan_size;
|
||||
fcb->ecc_type = l.eccn;
|
||||
|
||||
/* Also hardcoded in kobs-ng */
|
||||
fcb->ecc_nr = 0x00000200;
|
||||
fcb->ecc_size = 0x00000200;
|
||||
fcb->datasetup = 80;
|
||||
fcb->datahold = 60;
|
||||
fcb->addr_setup = 25;
|
||||
fcb->dsample_time = 6;
|
||||
fcb->meta_size = 10;
|
||||
if (is_mx6()) {
|
||||
fcb->datasetup = 80;
|
||||
fcb->datahold = 60;
|
||||
fcb->addr_setup = 25;
|
||||
fcb->dsample_time = 6;
|
||||
} else if (is_mx7()) {
|
||||
fcb->datasetup = 10;
|
||||
fcb->datahold = 7;
|
||||
fcb->addr_setup = 15;
|
||||
fcb->dsample_time = 6;
|
||||
}
|
||||
|
||||
/* DBBT search area starts at second page on first block */
|
||||
fcb->dbbt_start = 1;
|
||||
|
@ -162,6 +173,9 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
|
|||
|
||||
fcb->nr_blocks = mtd->writesize / fcb->ecc_nr - 1;
|
||||
|
||||
fcb->disbbm = 0;
|
||||
fcb->disbbm_search = 0;
|
||||
|
||||
fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
|
||||
}
|
||||
|
||||
|
@ -197,6 +211,7 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
|
|||
size_t fwsize, dummy;
|
||||
int i, ret;
|
||||
|
||||
fcb_raw_page = 0;
|
||||
/* erase */
|
||||
memset(&opts, 0, sizeof(opts));
|
||||
opts.offset = off;
|
||||
|
@ -287,50 +302,79 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
|
|||
else if (ret > 0)
|
||||
dbbt->dbbtpages = 1;
|
||||
|
||||
/* write fcb/dbbt */
|
||||
fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
|
||||
if (!fcb_raw_page) {
|
||||
debug("failed to allocate fcb_raw_page\n");
|
||||
ret = -ENOMEM;
|
||||
goto dbbt_data_page_err;
|
||||
}
|
||||
/*
|
||||
* We prepare raw page only for i.MX6, for i.MX7 we
|
||||
* leverage BCH hw module instead
|
||||
*/
|
||||
if (is_mx6()) {
|
||||
/* write fcb/dbbt */
|
||||
fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
|
||||
GFP_KERNEL);
|
||||
if (!fcb_raw_page) {
|
||||
debug("failed to allocate fcb_raw_page\n");
|
||||
ret = -ENOMEM;
|
||||
goto dbbt_data_page_err;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
|
||||
/* 40 bit BCH, for i.MX6UL(L) */
|
||||
encode_bch_ecc(fcb_raw_page + 32, fcb, 40);
|
||||
/* 40 bit BCH, for i.MX6UL(L) */
|
||||
encode_bch_ecc(fcb_raw_page + 32, fcb, 40);
|
||||
#else
|
||||
memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
|
||||
encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + 12 + 512, 512);
|
||||
memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
|
||||
encode_hamming_13_8(fcb_raw_page + 12,
|
||||
fcb_raw_page + 12 + 512, 512);
|
||||
#endif
|
||||
/*
|
||||
* Set the first and second byte of OOB data to 0xFF, not 0x00. These
|
||||
* bytes are used as the Manufacturers Bad Block Marker (MBBM). Since
|
||||
* the FCB is mostly written to the first page in a block, a scan for
|
||||
* factory bad blocks will detect these blocks as bad, e.g. when
|
||||
* function nand_scan_bbt() is executed to build a new bad block table.
|
||||
*/
|
||||
memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
|
||||
|
||||
/*
|
||||
* Set the first and second byte of OOB data to 0xFF,
|
||||
* not 0x00. These bytes are used as the Manufacturers Bad
|
||||
* Block Marker (MBBM). Since the FCB is mostly written to
|
||||
* the first page in a block, a scan for
|
||||
* factory bad blocks will detect these blocks as bad, e.g.
|
||||
* when function nand_scan_bbt() is executed to build a new
|
||||
* bad block table.
|
||||
*/
|
||||
memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
|
||||
}
|
||||
for (i = 0; i < nr_blks_fcb; i++) {
|
||||
if (mtd_block_isbad(mtd, off)) {
|
||||
printf("Block %d is bad, skipped\n", i);
|
||||
continue;
|
||||
}
|
||||
|
||||
/* raw write */
|
||||
mtd_oob_ops_t ops = {
|
||||
.datbuf = (u8 *)fcb_raw_page,
|
||||
.oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize,
|
||||
.len = mtd->writesize,
|
||||
.ooblen = mtd->oobsize,
|
||||
.mode = MTD_OPS_RAW
|
||||
};
|
||||
/*
|
||||
* User BCH ECC hardware module for i.MX7
|
||||
*/
|
||||
if (is_mx7()) {
|
||||
u32 off = i * mtd->erasesize;
|
||||
size_t rwsize = sizeof(*fcb);
|
||||
|
||||
ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
|
||||
if (ret)
|
||||
goto fcb_raw_page_err;
|
||||
debug("NAND fcb write: 0x%x offset, 0x%x bytes written: %s\n",
|
||||
mtd->erasesize * i, ops.len, ret ? "ERROR" : "OK");
|
||||
printf("Writing %d bytes to 0x%x: ", rwsize, off);
|
||||
|
||||
/* switch nand BCH to FCB compatible settings */
|
||||
mxs_nand_mode_fcb(mtd);
|
||||
ret = nand_write(mtd, off, &rwsize,
|
||||
(unsigned char *)fcb);
|
||||
mxs_nand_mode_normal(mtd);
|
||||
|
||||
printf("%s\n", ret ? "ERROR" : "OK");
|
||||
} else if (is_mx6()) {
|
||||
/* raw write */
|
||||
mtd_oob_ops_t ops = {
|
||||
.datbuf = (u8 *)fcb_raw_page,
|
||||
.oobbuf = ((u8 *)fcb_raw_page) +
|
||||
mtd->writesize,
|
||||
.len = mtd->writesize,
|
||||
.ooblen = mtd->oobsize,
|
||||
.mode = MTD_OPS_RAW
|
||||
};
|
||||
|
||||
ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
|
||||
if (ret)
|
||||
goto fcb_raw_page_err;
|
||||
debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
|
||||
mtd->erasesize * i, ops.len, ret ?
|
||||
"ERROR" : "OK");
|
||||
}
|
||||
|
||||
ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
|
||||
mtd->writesize, &dummy, dbbt_page);
|
||||
|
@ -352,7 +396,8 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
|
|||
}
|
||||
|
||||
fcb_raw_page_err:
|
||||
kfree(fcb_raw_page);
|
||||
if (is_mx6())
|
||||
kfree(fcb_raw_page);
|
||||
dbbt_data_page_err:
|
||||
kfree(dbbt_data_page);
|
||||
dbbt_page_err:
|
||||
|
|
Loading…
Reference in a new issue