From f0ff4692ff3372dec55074a8eb444943ab095abb Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 15 Aug 2006 14:15:51 +0200 Subject: [PATCH 01/72] Add FPGA Altera Cyclone 2 support Patch by Heiko Schocher, 15 Aug 2006 --- CHANGELOG | 3 + common/Makefile | 2 +- common/altera.c | 19 +++ common/cmd_fpga.c | 21 ++++ common/cyclon2.c | 305 ++++++++++++++++++++++++++++++++++++++++++++++ include/ACEX1K.h | 19 +++ include/altera.h | 4 + 7 files changed, 372 insertions(+), 1 deletion(-) create mode 100644 common/cyclon2.c diff --git a/CHANGELOG b/CHANGELOG index 24499c5621..43b8678745 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add FPGA Altera Cyclone 2 support + Patch by Heiko Schocher, 15 Aug 2006 + * Fix control-c handing in CONFIG_CMDLINE_EDITING Properly pass break code back from readline. Patch by Roger Blofeld, 31 Jul 2006 diff --git a/common/Makefile b/common/Makefile index eb0b5dadfe..7e446ec6f6 100644 --- a/common/Makefile +++ b/common/Makefile @@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ cmd_pci.o cmd_pcmcia.o cmd_portio.o \ cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \ cmd_usb.o cmd_vfd.o \ - command.o console.o devices.o dlmalloc.o docecc.o \ + command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o \ env_nvram.o env_nowhere.o \ diff --git a/common/altera.c b/common/altera.c index ebd50382c6..357d70234c 100644 --- a/common/altera.c +++ b/common/altera.c @@ -55,10 +55,15 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize ) } else { switch (desc->family) { case Altera_ACEX1K: + case Altera_CYC2: #if (CONFIG_FPGA & CFG_ACEX1K) PRINTF ("%s: Launching the ACEX1K Loader...\n", __FUNCTION__); ret_val = ACEX1K_load (desc, buf, bsize); +#elif (CONFIG_FPGA & CFG_CYCLON2) + PRINTF ("%s: Launching the CYCLON II Loader...\n", + __FUNCTION__); + ret_val = CYC2_load (desc, buf, bsize); #else printf ("%s: No support for ACEX1K devices.\n", __FUNCTION__); @@ -113,6 +118,9 @@ int altera_info( Altera_desc *desc ) printf ("ACEX1K\n"); break; /* Add new family types here */ + case Altera_CYC2: + printf ("CYCLON II\n"); + break; default: printf ("Unknown family type, %d\n", desc->family); } @@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc ) printf ("Device Function Table @ 0x%p\n", desc->iface_fns); switch (desc->family) { case Altera_ACEX1K: + case Altera_CYC2: #if (CONFIG_FPGA & CFG_ACEX1K) ACEX1K_info (desc); +#elif (CONFIG_FPGA & CFG_CYCLON2) + CYC2_info (desc); #else /* just in case */ printf ("%s: No support for ACEX1K devices.\n", @@ -186,6 +197,14 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset) #else printf ("%s: No support for ACEX devices.\n", __FUNCTION__); +#endif + break; + case Altera_CYC2: +#if (CONFIG_FPGA & CFG_CYCLON2) + ret_val = CYC2_reloc (desc, reloc_offset); +#else + printf ("%s: No support for CYCLON II devices.\n", + __FUNCTION__); #endif break; /* Add new family types here */ diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 9a01e7df8b..df859bd987 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr); #define FPGA_LOAD 1 #define FPGA_LOADB 2 #define FPGA_DUMP 3 +#define FPGA_LOADMK 4 /* Convert bitstream data and load into the fpga */ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) @@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) rc = fpga_loadbitstream(dev, fpga_data, data_size); break; + case FPGA_LOADMK: + { + image_header_t header; + image_header_t *hdr = &header; + ulong data; + + memmove (&header, (char *)fpga_data, sizeof(image_header_t)); + if (ntohl(hdr->ih_magic) != IH_MAGIC) { + puts ("Bad Magic Number\n"); + return 1; + } + data = (char *)(fpga_data + sizeof(image_header_t)); + data_size = ntohl(hdr->ih_size); + rc = fpga_load (dev, data, data_size); + } + break; + case FPGA_DUMP: rc = fpga_dump (dev, fpga_data, data_size); break; @@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr) op = FPGA_LOADB; } else if (!strcmp ("load", opstr)) { op = FPGA_LOAD; + } else if (!strcmp ("loadmk", opstr)) { + op = FPGA_LOADMK; } else if (!strcmp ("dump", opstr)) { op = FPGA_DUMP; } @@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga, "\tinfo\tlist known device information\n" "\tload\tLoad device from memory buffer\n" "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n" + "\tloadmk\tLoad device generated with mkimage\n" "\tdump\tLoad device to memory buffer\n"); #endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */ diff --git a/common/cyclon2.c b/common/cyclon2.c new file mode 100644 index 0000000000..dce13b50d0 --- /dev/null +++ b/common/cyclon2.c @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, hs@denx.de + * Based on ACE1XK.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include /* core U-Boot definitions */ +#include +#include /* ACEX device family */ + +#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) + +/* Define FPGA_DEBUG to get debug printf's */ +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* Note: The assumption is that we cannot possibly run fast enough to + * overrun the device (the Slave Parallel mode can free run at 50MHz). + * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * the board config file to slow things down. + */ +#ifndef CONFIG_FPGA_DELAY +#define CONFIG_FPGA_DELAY() +#endif + +#ifndef CFG_FPGA_WAIT +#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */ +#endif + +static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize ); +static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); +/* static int CYC2_ps_info( Altera_desc *desc ); */ +static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset ); + +/* ------------------------------------------------------------------------- */ +/* CYCLON2 Generic Implementation */ +int CYC2_load (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case passive_serial: + PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); + ret_val = CYC2_ps_load (desc, buf, bsize); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case passive_serial: + PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); + ret_val = CYC2_ps_dump (desc, buf, bsize); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +int CYC2_info( Altera_desc *desc ) +{ + return FPGA_SUCCESS; +} + +int CYC2_reloc (Altera_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; /* assume a failure */ + + if (desc->family != Altera_CYC2) { + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + return FPGA_FAIL; + } else + switch (desc->iface) { + case passive_serial: + ret_val = CYC2_ps_reloc (desc, reloc_offset); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +/* ------------------------------------------------------------------------- */ +/* CYCLON2 Passive Serial Generic Implementation */ +static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; /* assume the worst */ + Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns; + int ret = 0; + + PRINTF ("%s: start with interface functions @ 0x%p\n", + __FUNCTION__, fn); + + if (fn) { + int cookie = desc->cookie; /* make a local copy */ + unsigned long ts; /* timestamp */ + + PRINTF ("%s: Function Table:\n" + "ptr:\t0x%p\n" + "struct: 0x%p\n" + "config:\t0x%p\n" + "status:\t0x%p\n" + "write:\t0x%p\n" + "done:\t0x%p\n\n", + __FUNCTION__, &fn, fn, fn->config, fn->status, + fn->write, fn->done); +#ifdef CFG_FPGA_PROG_FEEDBACK + printf ("Loading FPGA Device %d...", cookie); +#endif + + /* + * Run the pre configuration function if there is one. + */ + if (*fn->pre) { + (*fn->pre) (cookie); + } + + /* Establish the initial state */ + (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ + + udelay(2); /* T_cfg > 2us */ + + /* Wait for nSTATUS to be asserted */ + ts = get_timer (0); /* get current time */ + do { + CONFIG_FPGA_DELAY (); + if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */ + puts ("** Timeout waiting for STATUS to go high.\n"); + (*fn->abort) (cookie); + return FPGA_FAIL; + } + } while (!(*fn->status) (cookie)); + + /* Get ready for the burn */ + CONFIG_FPGA_DELAY (); + + ret = (*fn->write) (buf, bsize, TRUE, cookie); + if (ret) { + puts ("** Write failed.\n"); + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#ifdef CFG_FPGA_PROG_FEEDBACK + puts(" OK? ..."); +#endif + + CONFIG_FPGA_DELAY (); + +#ifdef CFG_FPGA_PROG_FEEDBACK + putc (' '); /* terminate the dotted line */ +#endif + + /* + * Checking FPGA's CONF_DONE signal - correctly booted ? + */ + + if ( ! (*fn->done) (cookie) ) { + puts ("** Booting failed! CONF_DONE is still deasserted.\n"); + (*fn->abort) (cookie); + return (FPGA_FAIL); + } +#ifdef CFG_FPGA_PROG_FEEDBACK + puts(" OK\n"); +#endif + + ret_val = FPGA_SUCCESS; + +#ifdef CFG_FPGA_PROG_FEEDBACK + if (ret_val == FPGA_SUCCESS) { + puts ("Done.\n"); + } + else { + puts ("Fail.\n"); + } +#endif + (*fn->post) (cookie); + + } else { + printf ("%s: NULL Interface function table!\n", __FUNCTION__); + } + + return ret_val; +} + +static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize) +{ + /* Readback is only available through the Slave Parallel and */ + /* boundary-scan interfaces. */ + printf ("%s: Passive Serial Dumping is unavailable\n", + __FUNCTION__); + return FPGA_FAIL; +} + +static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; /* assume the worst */ + Altera_CYC2_Passive_Serial_fns *fn_r, *fn = + (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns); + + if (fn) { + ulong addr; + + /* Get the relocated table address */ + addr = (ulong) fn + reloc_offset; + fn_r = (Altera_CYC2_Passive_Serial_fns *) addr; + + if (!fn_r->relocated) { + + if (memcmp (fn_r, fn, + sizeof (Altera_CYC2_Passive_Serial_fns)) + == 0) { + /* good copy of the table, fix the descriptor pointer */ + desc->iface_fns = fn_r; + } else { + PRINTF ("%s: Invalid function table at 0x%p\n", + __FUNCTION__, fn_r); + return FPGA_FAIL; + } + + PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, + desc); + + addr = (ulong) (fn->pre) + reloc_offset; + fn_r->pre = (Altera_pre_fn) addr; + + addr = (ulong) (fn->config) + reloc_offset; + fn_r->config = (Altera_config_fn) addr; + + addr = (ulong) (fn->status) + reloc_offset; + fn_r->status = (Altera_status_fn) addr; + + addr = (ulong) (fn->done) + reloc_offset; + fn_r->done = (Altera_done_fn) addr; + + addr = (ulong) (fn->write) + reloc_offset; + fn_r->write = (Altera_write_fn) addr; + + addr = (ulong) (fn->abort) + reloc_offset; + fn_r->abort = (Altera_abort_fn) addr; + + addr = (ulong) (fn->post) + reloc_offset; + fn_r->post = (Altera_post_fn) addr; + + fn_r->relocated = TRUE; + + } else { + /* this table has already been moved */ + /* XXX - should check to see if the descriptor is correct */ + desc->iface_fns = fn_r; + } + + ret_val = FPGA_SUCCESS; + } else { + printf ("%s: NULL Interface function table!\n", __FUNCTION__); + } + + return ret_val; +} + +#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */ diff --git a/include/ACEX1K.h b/include/ACEX1K.h index f75c463f33..f249d6402d 100644 --- a/include/ACEX1K.h +++ b/include/ACEX1K.h @@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize ); extern int ACEX1K_info( Altera_desc *desc ); extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off ); +extern int CYC2_load( Altera_desc *desc, void *image, size_t size ); +extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize ); +extern int CYC2_info( Altera_desc *desc ); +extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off ); + /* Slave Serial Implementation function table */ typedef struct { Altera_pre_fn pre; @@ -48,6 +53,18 @@ typedef struct { int relocated; } Altera_ACEX1K_Passive_Serial_fns; +/* Slave Serial Implementation function table */ +typedef struct { + Altera_pre_fn pre; + Altera_config_fn config; + Altera_status_fn status; + Altera_done_fn done; + Altera_write_fn write; + Altera_abort_fn abort; + Altera_post_fn post; + int relocated; +} Altera_CYC2_Passive_Serial_fns; + /* Device Image Sizes *********************************************************************/ /* ACEX1K */ @@ -60,6 +77,8 @@ typedef struct { #endif #define Altera_EP1K100_SIZE (166965*8) +#define Altera_EP2C35_SIZE 883905 + /* Descriptor Macros *********************************************************************/ /* ACEX1K devices */ diff --git a/include/altera.h b/include/altera.h index 74b6729f90..7b8cb4a55d 100644 --- a/include/altera.h +++ b/include/altera.h @@ -34,8 +34,10 @@ /* Altera Model definitions *********************************************************************/ #define CFG_ACEX1K CFG_FPGA_DEV( 0x1 ) +#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 ) #define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K) +#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2) /* Add new models here */ /* Altera Interface definitions @@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_iface */ typedef enum { /* typedef Altera_Family */ min_altera_type, /* insert all new types after this */ Altera_ACEX1K, /* ACEX1K Family */ + Altera_CYC2, /* CYCLONII Family */ /* Add new models here */ max_altera_type /* insert all new types before this */ } Altera_Family; /* end, typedef Altera_Family */ @@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int cookie ); typedef int (*Altera_done_fn)( int cookie ); typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie ); typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie ); +typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie); typedef int (*Altera_abort_fn)( int cookie ); typedef int (*Altera_post_fn)( int cookie ); From 899620c2d66d4eef3b2a0034d062e71d45d886c9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 15 Aug 2006 14:22:35 +0200 Subject: [PATCH 02/72] Add initial support for the ALPR board from Prodrive NAND needs some additional testing Patch by Heiko Schocher, 15 Aug 2006 --- CHANGELOG | 4 + Makefile | 3 + board/prodrive/alpr/Makefile | 47 ++++ board/prodrive/alpr/alpr.c | 283 ++++++++++++++++++++++++ board/prodrive/alpr/config.mk | 44 ++++ board/prodrive/alpr/fpga.c | 264 ++++++++++++++++++++++ board/prodrive/alpr/init.S | 109 +++++++++ board/prodrive/alpr/nand.c | 271 +++++++++++++++++++++++ board/prodrive/alpr/u-boot.lds | 157 +++++++++++++ cpu/ppc4xx/405gp_pci.c | 4 + cpu/ppc4xx/4xx_enet.c | 15 ++ cpu/ppc4xx/sdram.c | 8 + include/configs/alpr.h | 393 +++++++++++++++++++++++++++++++++ include/ppc440.h | 2 +- 14 files changed, 1603 insertions(+), 1 deletion(-) create mode 100644 board/prodrive/alpr/Makefile create mode 100644 board/prodrive/alpr/alpr.c create mode 100644 board/prodrive/alpr/config.mk create mode 100644 board/prodrive/alpr/fpga.c create mode 100644 board/prodrive/alpr/init.S create mode 100644 board/prodrive/alpr/nand.c create mode 100644 board/prodrive/alpr/u-boot.lds create mode 100644 include/configs/alpr.h diff --git a/CHANGELOG b/CHANGELOG index 43b8678745..f01ad9eaba 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add initial support for the ALPR board from Prodrive + NAND needs some additional testing + Patch by Heiko Schocher, 15 Aug 2006 + * Add FPGA Altera Cyclone 2 support Patch by Heiko Schocher, 15 Aug 2006 diff --git a/Makefile b/Makefile index 128ae59a06..fc4ffd848c 100644 --- a/Makefile +++ b/Makefile @@ -818,6 +818,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$( ADCIOP_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx adciop esd +alpr_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive + AP1000_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile new file mode 100644 index 0000000000..8fc60095e1 --- /dev/null +++ b/board/prodrive/alpr/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o fpga.o nand.o +SOBJS = init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c new file mode 100644 index 0000000000..4f250c4f2f --- /dev/null +++ b/board/prodrive/alpr/alpr.c @@ -0,0 +1,283 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +extern int alpr_fpga_init(void); + +int board_early_init_f (void) +{ + unsigned long mfr; + + /*-------------------------------------------------------------------------+ + | Initialize EBC CONFIG + +-------------------------------------------------------------------------*/ + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + mtdcr (uic0er, 0x00000000); /* disable all */ + mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */ + mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */ + mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + + mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (uic1er, 0x00000000); /* disable all */ + mtdcr (uic1cr, 0x00000000); /* all non-critical */ + mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */ + mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */ + mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic1sr, 0xffffffff); /* clear all */ + + mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (uic2er, 0x00000000); /* disable all */ + mtdcr (uic2cr, 0x00000000); /* all non-critical */ + mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic2sr, 0xffffffff); /* clear all */ + + mtdcr (uicb0sr, 0xfc000000); /* clear all */ + mtdcr (uicb0er, 0x00000000); /* disable all */ + mtdcr (uicb0cr, 0x00000000); /* all non-critical */ + mtdcr (uicb0pr, 0xfc000000); /* */ + mtdcr (uicb0tr, 0x00000000); /* */ + mtdcr (uicb0vr, 0x00000001); /* */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ECS_MASK; + + return 0; +} + +int checkboard (void) +{ + char *s = getenv ("serial#"); + + printf ("Board: ALPR"); + if (s != NULL) { + puts (", serial# "); + puts (s); + } + putc ('\n'); + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * The ocotea board is always configured as the host & requires the + * PCI arbiter to be enabled. + *--------------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + /* FPGA Init */ + alpr_fpga_init (); + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The ocotea board is always configured as host. */ + return(1); +} +#endif /* defined(CONFIG_PCI) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; +#if 0 + /*--------------------------------------------------------------------------+ + | Write the PowerPC440 PCI Configuration regs. + | Enable PowerPC440 to be a master on the PCI bus (PMM). + | Enable PowerPC440 to act as a PCI memory target (PTM). + +--------------------------------------------------------------------------*/ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +#endif +#if 1 + /*--------------------------------------------------------------------------+ + | PowerPC440 PCI Master configuration. + | Map PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r( PCIX0_POM0SA, 0 ); /* disable */ + out32r( PCIX0_POM1SA, 0 ); /* disable */ + out32r( PCIX0_POM2SA, 0 ); /* disable */ + + out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ + + out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ + +#endif +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + + return (ctrlc()); +} +#endif diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk new file mode 100644 index 0000000000..9e1833591a --- /dev/null +++ b/board/prodrive/alpr/config.mk @@ -0,0 +1,44 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AMCC 440GX Reference Platform (Ocotea) board +# + +#TEXT_BASE = 0xFFFE0000 + +ifeq ($(ramsym),1) +TEXT_BASE = 0x07FD0000 +else +TEXT_BASE = 0xFFFC0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c new file mode 100644 index 0000000000..78307b486b --- /dev/null +++ b/board/prodrive/alpr/fpga.c @@ -0,0 +1,264 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Altera FPGA configuration support for the ALPR computer from prodrive + */ + +#include +#include +#include +#include +#include +#include +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_FPGA) + +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +static unsigned long regval; + +#define SET_GPIO_REG_0(reg, bit) {\ + regval = in32(reg);\ + regval &= ~(0x80000000 >> bit);\ + out32(reg, regval);\ + } + +#define SET_GPIO_REG_1(reg, bit) {\ + regval = in32(reg);\ + regval |= (0x80000000 >> bit);\ + out32(reg, regval);\ + } + +#define GPIO_CLK_PIN 0x00002000 +#define GPIO_CLK_PIN_I 0xffffdfff +#define GPIO_DAT_PIN 0x00001000 +#define GPIO_DAT_PIN_I 0xffffefff +#define GPIO_CLKDAT_PIN_I 0xffffcfff + +#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I); +#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN); +#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I); +#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN); + +#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) +#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) + +#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN); +#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I); + +#define FPGA_WRITE_1 { \ + SET_GPIO_CLK_0_Z1\ + SET_GPIO_CLK_1} + +#define FPGA_WRITE_0 { \ + SET_GPIO_CLK_0_Z0\ + SET_GPIO_CLK_1} + +#define P_GP(reg) (reg & 0x00023f00) + +/* Plattforminitializations */ +/* Here we have to set the FPGA Chain */ +/* PROGRAM_PROG_EN = HIGH */ +/* PROGRAM_SEL_DPR = LOW */ +int fpga_pre_fn (int cookie) +{ + unsigned long reg; + + reg = in32(GPIO0_IR); + /* Enable the FPGA Chain */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN); + SET_GPIO_1(CFG_GPIO_PROG_EN); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR); + SET_GPIO_0((CFG_GPIO_SEL_DPR)); + + /* initialize the GPIO Pins */ + /* output */ + SET_GPIO_0(CFG_GPIO_CLK); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK); + + /* output */ + SET_GPIO_0(CFG_GPIO_DATA); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA); + + /* First we set STATUS to 0 then as an input */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); + SET_GPIO_0(CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); + + /* output */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG); + SET_GPIO_0(CFG_GPIO_CONFIG); + + /* input */ + SET_GPIO_0(CFG_GPIO_CON_DON); + SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON); + + /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ + SET_GPIO_0(CFG_GPIO_CONFIG); + return FPGA_SUCCESS; +} + +/* Set the state of CONFIG Pin */ +int fpga_config_fn (int assert_config, int flush, int cookie) +{ + if (assert_config) { + SET_GPIO_1(CFG_GPIO_CONFIG); + } else { + SET_GPIO_0(CFG_GPIO_CONFIG); + } + return FPGA_SUCCESS; +} + +/* Returns the state of STATUS Pin */ +int fpga_status_fn (int cookie) +{ + unsigned long reg; + + reg = in32(GPIO0_IR); + if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) { + PRINTF("STATUS = HIGH\n"); + return FPGA_FAIL; + } + PRINTF("STATUS = LOW\n"); + return FPGA_SUCCESS; +} + +/* Returns the state of CONF_DONE Pin */ +int fpga_done_fn (int cookie) +{ + unsigned long reg; + reg = in32(GPIO0_IR); + if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) { + PRINTF("CONF_DON = HIGH\n"); + return FPGA_FAIL; + } + PRINTF("CONF_DON = LOW\n"); + return FPGA_SUCCESS; +} + +/* writes the complete buffer to the FPGA + writing the complete buffer in one function is very faster, + then calling it for every bit */ +int fpga_write_fn (void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + unsigned char *data = (unsigned char *) buf; + unsigned char val=0; + int i; + + while (bytecount < len) { +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) { + return FPGA_FAIL; + } +#endif + val = data[bytecount ++ ]; + i = 8; + do { + if (val & 0x01) { + FPGA_WRITE_1; + } else { + FPGA_WRITE_0; + } + val >>= 1; + i --; + } while (i > 0); + +#ifdef CFG_FPGA_PROG_FEEDBACK + if (bytecount % (len / 40) == 0) + putc ('.'); /* let them know we are alive */ +#endif + } + return FPGA_SUCCESS; +} + +/* called, when programming is aborted */ +int fpga_abort_fn (int cookie) +{ + SET_GPIO_1((CFG_GPIO_SEL_DPR)); + return FPGA_SUCCESS; +} + +/* called, when programming was succesful */ +int fpga_post_fn (int cookie) +{ + return fpga_abort_fn (cookie); +} + +/* Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + */ +Altera_CYC2_Passive_Serial_fns fpga_fns = { + fpga_pre_fn, + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_write_fn, + fpga_abort_fn, + fpga_post_fn +}; + +Altera_desc fpga[CONFIG_FPGA_COUNT] = { + {Altera_CYC2, + passive_serial, + Altera_EP2C35_SIZE, + (void *) &fpga_fns, + NULL, + 0} +}; + +/* + * Initialize the fpga. Return 1 on success, 0 on failure. + */ +int alpr_fpga_init (void) +{ + int i; + + PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off); + fpga_init (gd->reloc_off); + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i); + fpga_add (fpga_altera, &fpga[i]); + } + return 1; +} + +#endif diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S new file mode 100644 index 0000000000..59d3ab634e --- /dev/null +++ b/board/prodrive/alpr/init.S @@ -0,0 +1,109 @@ +/* +* Copyright (C) 2002 Scott McNutt +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include +#include + +/* General */ +#define TLB_VALID 0x00000200 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) +#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) +#define TLB2(a) ( (a)&0x00000fbf ) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ; \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) + + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) +#if 1 + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) +#endif +#if 0 + tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 3, AC_R|AC_W|SA_G|SA_I ) +#endif + + /* NAND */ + tlbentry( CFG_NAND_BASE, SZ_16M, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbtab_end diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c new file mode 100644 index 0000000000..bd9ba3560e --- /dev/null +++ b/board/prodrive/alpr/nand.c @@ -0,0 +1,271 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include + +#if 0 +#define HS_printf(fmt,arg...) \ + printf("HS %s %s: " fmt,__FILE__, __FUNCTION__, ##arg) +#else +#define HS_printf(fmt,arg...) \ + do { } while (0) +#endif + +#if 0 +#define CPLD_REG uchar +#else +#define CPLD_REG u16 +#endif + +struct alpr_ndfc_regs { + CPLD_REG cmd[4]; + CPLD_REG addr_wait; + CPLD_REG term; + CPLD_REG dummy; + uchar dum2[2]; + CPLD_REG data; +}; + +static u8 hwctl; +static struct alpr_ndfc_regs *alpr_ndfc; +static int alpr_chip = 0; + +#if 1 +static int pdnb3_nand_dev_ready(struct mtd_info *mtd); + +#if 1 +static u_char alpr_read (void *padr) { + return (u_char )*((u16 *)(padr)); +} +#else +static u_char alpr_read (void *padr) { + u16 hilf; + u_char ret = 0; + hilf = *((u16 *)(padr)); + ret = hilf; +printf("%p hilf: %x ret: %x\n", padr, hilf, ret); + return ret; +} +#endif + +static void alpr_write (u_char byte, void *padr) { +HS_printf("%p Byte: %x\n", padr, byte); + *(volatile u16 *)padr = (u16)(byte); +} + +#elif 0 +#define alpr_read(a) (*(volatile u16 *) (a)) +#define alpr_write(a, b) ((*(volatile u16 *) (a)) = (b)) +#else +#define alpr_read(a) readw(a) +#define alpr_write(a, b) writew(a, b) +#endif +/* + * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to + * the NAND devices. The NDFC has command, address and data registers that + * when accessed will set up the NAND flash pins appropriately. We'll use the + * hwcontrol function to save the configuration in a global variable. + * We can then use this information in the read and write functions to + * determine which NDFC register to access. + * + * There are 2 NAND devices on the board, a Hynix HY27US08561A (32 MByte). + */ +static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ +HS_printf("cmd: %x\n", cmd); + switch (cmd) { + case NAND_CTL_SETCLE: + hwctl |= 0x1; + break; + case NAND_CTL_CLRCLE: + hwctl &= ~0x1; + break; + case NAND_CTL_SETALE: + hwctl |= 0x2; + break; + case NAND_CTL_CLRALE: + hwctl &= ~0x2; + break; + case NAND_CTL_SETNCE: + break; + case NAND_CTL_CLRNCE: + alpr_write(0x00, &(alpr_ndfc->term)); + break; + } +} + +static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte) +{ +HS_printf("hwctl: %x %x %x %x\n", hwctl, byte, &(alpr_ndfc->cmd[alpr_chip]), &(alpr_ndfc->addr_wait)); + if (hwctl & 0x1) + alpr_write(byte, &(alpr_ndfc->cmd[alpr_chip])); + else if (hwctl & 0x2) { + alpr_write(byte, &(alpr_ndfc->addr_wait)); + } else + alpr_write(byte, &(alpr_ndfc->data)); +} + +static u_char pdnb3_nand_read_byte(struct mtd_info *mtd) +{ + return alpr_read(&(alpr_ndfc->data)); +} + +static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + +/*printf("%s chip:%d hwctl:%x size:%d\n", __FUNCTION__, alpr_chip, hwctl, len);*/ + for (i = 0; i < len; i++) { + if (hwctl & 0x1) + alpr_write(buf[i], &(alpr_ndfc->cmd[alpr_chip])); + else if (hwctl & 0x2) { + alpr_write(buf[i], &(alpr_ndfc->addr_wait)); + } else { + alpr_write(buf[i], &(alpr_ndfc->data)); + /*printf("i: %d\n", i);*/ + } + } +} + +static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) { + buf[i] = alpr_read(&(alpr_ndfc->data)); + } +} + +static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + if (buf[i] != alpr_read(&(alpr_ndfc->data))) + return i; + + return 0; +} + +static int pdnb3_nand_dev_ready(struct mtd_info *mtd) +{ +#if 1 + volatile u_char val; + +/*printf("%s aufruf\n", __FUNCTION__);*/ + /* + * Blocking read to wait for NAND to be ready + */ + val = alpr_read(&(alpr_ndfc->addr_wait)); + + /* + * Return always true + */ + return 1; +#else + u8 hwctl_org = hwctl; + unsigned long timeo; + u8 val; + + hwctl = 0x01; + pdnb3_nand_write_byte (mtd, NAND_CMD_STATUS); + hwctl = hwctl_org; + + reset_timer(); + while (1) { + if (get_timer(0) > timeo) { + printf("Timeout!"); + return 0; + } + +val = pdnb3_nand_read_byte(mtd); +/*printf("%s val: %x\n", __FUNCTION__, val);*/ + if (val & NAND_STATUS_READY) + break; + } + return 1; +#endif + +} + +static void alpr_select_chip(struct mtd_info *mtd, int chip) +{ + alpr_chip = chip; +} + +static int alpr_nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +{ + unsigned long timeo; + + if (state == FL_ERASING) + timeo = CFG_HZ * 400; + else + timeo = CFG_HZ * 20; + + if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) + this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); + else + this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + + reset_timer(); + + while (1) { + if (get_timer(0) > timeo) { + printf("Timeout!"); + return 0; + } + + if (this->read_byte(mtd) & NAND_STATUS_READY) + break; + } + return this->read_byte(mtd); +} + +void board_nand_init(struct nand_chip *nand) +{ + alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE; + + nand->eccmode = NAND_ECC_SOFT; + + /* Set address of NAND IO lines (Using Linear Data Access Region) */ + nand->IO_ADDR_R = (void __iomem *) ((ulong) alpr_ndfc + 0x10); + nand->IO_ADDR_W = (void __iomem *) ((ulong) alpr_ndfc + 0x10); + /* Reference hardware control function */ + nand->hwcontrol = pdnb3_nand_hwcontrol; + /* Set command delay time */ + nand->hwcontrol = pdnb3_nand_hwcontrol; + nand->write_byte = pdnb3_nand_write_byte; + nand->read_byte = pdnb3_nand_read_byte; + nand->write_buf = pdnb3_nand_write_buf; + nand->read_buf = pdnb3_nand_read_buf; + nand->verify_buf = pdnb3_nand_verify_buf; + nand->dev_ready = pdnb3_nand_dev_ready; + nand->select_chip = alpr_select_chip; + nand->waitfunc = alpr_nand_wait; +} +#endif diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds new file mode 100644 index 0000000000..4f04089c94 --- /dev/null +++ b/board/prodrive/alpr/u-boot.lds @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/prodrive/alpr/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 0b0686bcf7..7e2c7c1a9c 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller *hose) pci_set_region(hose->regions + reg_num++, CFG_PCI_TARGBASE, CFG_PCI_MEMBASE, +#ifdef CFG_PCI_MEMSIZE + CFG_PCI_MEMSIZE, +#else 0x10000000, +#endif PCI_REGION_MEM ); #if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index fab65aff78..d166993a10 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -502,6 +502,21 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { +#if defined(CONFIG_88E1111_CLK_DELAY) + /* + * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs + * the "RGMII transmit timing control" and "RGMII receive + * timing control" bits set, so that Gbit communication works + * without problems. + * Also set the "Transmitter disable" to 1 to enable the + * transmitter. + * After setting these bits a soft-reset must occur for this + * change to become active. + */ + miiphy_read (dev->name, reg, 0x14, ®_short); + reg_short |= (1 << 7) | (1 << 1) | (1 << 0); + miiphy_write (dev->name, reg, 0x14, reg_short); +#endif miiphy_reset (dev->name, reg); #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index faeea5c91e..f06038e998 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -351,6 +351,14 @@ long int initdram(int board_type) int i; int tr1_bank1; +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) + /* + * Soft-reset SDRAM controller. + */ + mtsdr(sdr_srst, SDR0_SRST_DMC); + mtsdr(sdr_srst, 0x00000000); +#endif + for (i=0; i + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ + +/*----------------------------------------------------------------------- + * FPGA stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#undef CFG_FPGA_CHECK_CTRLC +#undef CFG_FPGA_PROG_FEEDBACK +#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in + Reihe geschaltet -> sollte gehen, + aufpassen mit Datasize ist jetzt + halt doppelt so gross ... Seite 306 + ist das mit den multiple Device in PS + Mode erklaert ...*/ + + +/* FPGA program pin configuration */ +#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ +#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */ +#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */ +#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */ +#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */ + +#define CFG_GPIO_SEL_DPR 14 /* cpu output */ +#define CFG_GPIO_SEL_AVR 15 /* cpu output */ +#define CFG_GPIO_PROG_EN 23 /* cpu output */ + +/* + * NAND-FLASH stuff + */ +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS 2 +#define CFG_NAND_BASE 0x50000000 /* NAND FLASH Base Address */ + +#if 0 +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 4 +#endif + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x92015480 +#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ +/* Memory Bank 1 (NAND-FLASH) initialization */ +/*#define CFG_EBC_PB1AP 0x108f4380 */ /* TODO */ +/*#define CFG_EBC_PB1AP 0x7f854380 */ /* TODO */ +/*#define CFG_EBC_PB1AP 0x108553c0 */ +/*#define CFG_EBC_PB1AP 0x108053c0 */ +#define CFG_EBC_PB1AP 0x10810180 + +/*#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) *//* BS=1MB,BU=R/W,BW=8bit */ +#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/ppc440.h b/include/ppc440.h index d5a9f66a41..b81e34d42e 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -2631,7 +2631,7 @@ #define GPIO0 0 #define GPIO1 1 -#if defined(CONFIG_440GP) +#if defined(CONFIG_440GP) || defined(CONFIG_440GX) #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700) #define GPIO0_OR (GPIO0_BASE+0x0) From f3443867e90d2979a7dd1c65b0d537777e1f9850 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 7 Oct 2006 11:30:52 +0200 Subject: [PATCH 03/72] Add CONFIG_BOARD_RESET to configure board specific reset function Patch by Stefan Roese, 07 Oct 2006 --- CHANGELOG | 3 +++ board/amcc/yellowstone/yellowstone.c | 6 ++++++ board/amcc/yosemite/yosemite.c | 6 ++++++ cpu/ppc4xx/cpu.c | 20 ++++++++------------ include/configs/yellowstone.h | 1 + include/configs/yosemite.h | 1 + 6 files changed, 25 insertions(+), 12 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e5fa93bc05..4af02002ab 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add CONFIG_BOARD_RESET to configure board specific reset function + Patch by Stefan Roese, 07 Oct 2006 + * Remove compile warnings in fpga code Patch by Stefan Roese, 18 Sep 2006 diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 92dc9d4c02..754ae449c1 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -552,3 +552,9 @@ void hw_watchdog_reset(void) } #endif + +void board_reset(void) +{ + /* give reset to BCSR */ + *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; +} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 7f2e718203..588ee900da 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -548,3 +548,9 @@ void hw_watchdog_reset(void) } #endif + +void board_reset(void) +{ + /* give reset to BCSR */ + *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; +} diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 94478dbb10..4e81ce2401 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -41,6 +41,10 @@ DECLARE_GLOBAL_DATA_PTR; #endif +#if defined(CONFIG_BOARD_RESET) +void board_reset(void); +#endif + #if defined(CONFIG_440) #define FREQ_EBC (sys_info.freqEPB) #else @@ -414,23 +418,15 @@ int ppc440spe_revB() { int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { -#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE) - /*give reset to BCSR*/ - *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09; - +#if defined(CONFIG_BOARD_RESET) + board_reset(); #else - /* * Initiate system reset in debug control register DBCR */ - __asm__ __volatile__("lis 3, 0x3000" ::: "r3"); -#if defined(CONFIG_440) - __asm__ __volatile__("mtspr 0x134, 3"); -#else - __asm__ __volatile__("mtspr 0x3f2, 3"); -#endif + mtspr(dbcr0, 0x30000000); +#endif /* defined(CONFIG_BOARD_RESET) */ -#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/ return 1; } diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index ba27f37f6e..58717f8a60 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -37,6 +37,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 3d7b4a2f4b..6e942abcaa 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -37,6 +37,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the From 77d5034847d328753b80c46b83f960a14a26f40e Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 7 Oct 2006 11:33:03 +0200 Subject: [PATCH 04/72] Remove compile warnings in fpga code Patch by Stefan Roese, 07 Oct 2006 --- CHANGELOG | 3 +++ common/cmd_fpga.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 4af02002ab..7ed5e668fb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Remove compile warnings in fpga code + Patch by Stefan Roese, 07 Oct 2006 + * Add CONFIG_BOARD_RESET to configure board specific reset function Patch by Stefan Roese, 07 Oct 2006 diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index df859bd987..3444091858 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -263,9 +263,9 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) puts ("Bad Magic Number\n"); return 1; } - data = (char *)(fpga_data + sizeof(image_header_t)); + data = ((ulong)fpga_data + sizeof(image_header_t)); data_size = ntohl(hdr->ih_size); - rc = fpga_load (dev, data, data_size); + rc = fpga_load (dev, (void *)data, data_size); } break; From 5bc528fa4da751d472397b308137238a6465afd2 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 7 Oct 2006 11:35:25 +0200 Subject: [PATCH 05/72] Update ALPR code (NAND support working now) Patch by Stefan Roese, 07 Oct 2006 --- CHANGELOG | 3 + board/prodrive/alpr/Makefile | 2 +- board/prodrive/alpr/alpr.c | 31 +++--- board/prodrive/alpr/flash.c | 70 ++++++++++++ board/prodrive/alpr/init.S | 87 +++++++-------- board/prodrive/alpr/nand.c | 202 +++++++++------------------------- board/prodrive/common/flash.c | 4 + include/configs/alpr.h | 99 +++++------------ 8 files changed, 216 insertions(+), 282 deletions(-) create mode 100644 board/prodrive/alpr/flash.c diff --git a/CHANGELOG b/CHANGELOG index 7ed5e668fb..a21526b971 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 + * Remove compile warnings in fpga code Patch by Stefan Roese, 07 Oct 2006 diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile index 993ad1995d..1024a41a07 100644 --- a/board/prodrive/alpr/Makefile +++ b/board/prodrive/alpr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o fpga.o nand.o +COBJS = $(BOARD).o flash.o fpga.o nand.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 4f250c4f2f..e8435bf63c 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -38,11 +38,19 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------------*/ +#if 0 mtebc(xbcfg, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#else + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -230,19 +238,6 @@ int is_pci_host(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; -#if 0 - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 PCI Configuration regs. - | Enable PowerPC440 to be a master on the PCI bus (PMM). - | Enable PowerPC440 to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -#endif -#if 1 /*--------------------------------------------------------------------------+ | PowerPC440 PCI Master configuration. | Map PLB/processor addresses to PCI memory space. @@ -265,8 +260,6 @@ void pci_master_init(struct pci_controller *hose) out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ - -#endif } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ @@ -281,3 +274,11 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +void board_reset(void) +{ + /* + * Initiate chip reset in debug control register DBCR + */ + mtspr(dbcr0, 0x20000000); +} diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c new file mode 100644 index 0000000000..8fa008430a --- /dev/null +++ b/board/prodrive/alpr/flash.c @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* + * include common flash code (for esd boards) + */ +#include "../common/flash.c" + +/* + * Prototypes + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info); + +unsigned long flash_init(void) +{ + unsigned long size; + int i; + + /* Init: no FLASHes known */ + for (i=0; i -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include #include @@ -27,15 +28,15 @@ #define TLB_VALID 0x00000200 /* Supported page sizes */ - #define SZ_1K 0x00000000 #define SZ_4K 0x00000010 #define SZ_16K 0x00000020 #define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 +#define SZ_256K 0x00000040 #define SZ_1M 0x00000050 +#define SZ_8M 0x00000060 #define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 +#define SZ_256M 0x00000090 /* Storage attributes */ #define SA_W 0x00000800 /* Write-through */ @@ -81,29 +82,23 @@ * *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab + .section .bootpg,"ax" + .globl tlbtab tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) -#if 1 - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) -#endif -#if 0 - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 3, AC_R|AC_W|SA_G|SA_I ) -#endif + tlbtab_start + tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) - /* NAND */ - tlbentry( CFG_NAND_BASE, SZ_16M, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbtab_end + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) + + /* NAND */ + tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbtab_end diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index bd9ba3560e..20a8098307 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -2,6 +2,9 @@ * (C) Copyright 2006 * Heiko Schocher, DENX Software Engineering, hs@denx.de * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * * See file CREDITS for list of people who contributed to this * project. * @@ -22,69 +25,27 @@ */ #include -#include #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include #include -#if 0 -#define HS_printf(fmt,arg...) \ - printf("HS %s %s: " fmt,__FILE__, __FUNCTION__, ##arg) -#else -#define HS_printf(fmt,arg...) \ - do { } while (0) -#endif - -#if 0 -#define CPLD_REG uchar -#else -#define CPLD_REG u16 -#endif - struct alpr_ndfc_regs { - CPLD_REG cmd[4]; - CPLD_REG addr_wait; - CPLD_REG term; - CPLD_REG dummy; - uchar dum2[2]; - CPLD_REG data; + u16 cmd[4]; + u16 addr_wait; + u16 term; + u16 dummy; + u16 dummy2; + u16 data; }; static u8 hwctl; -static struct alpr_ndfc_regs *alpr_ndfc; -static int alpr_chip = 0; +static struct alpr_ndfc_regs *alpr_ndfc = NULL; -#if 1 -static int pdnb3_nand_dev_ready(struct mtd_info *mtd); +#define readb(addr) (u8)(*(volatile u16 *)(addr)) +#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d)) -#if 1 -static u_char alpr_read (void *padr) { - return (u_char )*((u16 *)(padr)); -} -#else -static u_char alpr_read (void *padr) { - u16 hilf; - u_char ret = 0; - hilf = *((u16 *)(padr)); - ret = hilf; -printf("%p hilf: %x ret: %x\n", padr, hilf, ret); - return ret; -} -#endif - -static void alpr_write (u_char byte, void *padr) { -HS_printf("%p Byte: %x\n", padr, byte); - *(volatile u16 *)padr = (u16)(byte); -} - -#elif 0 -#define alpr_read(a) (*(volatile u16 *) (a)) -#define alpr_write(a, b) ((*(volatile u16 *) (a)) = (b)) -#else -#define alpr_read(a) readw(a) -#define alpr_write(a, b) writew(a, b) -#endif /* * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to * the NAND devices. The NDFC has command, address and data registers that @@ -93,11 +54,10 @@ HS_printf("%p Byte: %x\n", padr, byte); * We can then use this information in the read and write functions to * determine which NDFC register to access. * - * There are 2 NAND devices on the board, a Hynix HY27US08561A (32 MByte). + * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte). */ -static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd) { -HS_printf("cmd: %x\n", cmd); switch (cmd) { case NAND_CTL_SETCLE: hwctl |= 0x1; @@ -114,136 +74,84 @@ HS_printf("cmd: %x\n", cmd); case NAND_CTL_SETNCE: break; case NAND_CTL_CLRNCE: - alpr_write(0x00, &(alpr_ndfc->term)); + writeb(0x00, &(alpr_ndfc->term)); break; } } -static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte) +static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte) { -HS_printf("hwctl: %x %x %x %x\n", hwctl, byte, &(alpr_ndfc->cmd[alpr_chip]), &(alpr_ndfc->addr_wait)); + struct nand_chip *nand = mtd->priv; + if (hwctl & 0x1) - alpr_write(byte, &(alpr_ndfc->cmd[alpr_chip])); + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(byte, nand->IO_ADDR_W); else if (hwctl & 0x2) { - alpr_write(byte, &(alpr_ndfc->addr_wait)); + writeb(byte, &(alpr_ndfc->addr_wait)); } else - alpr_write(byte, &(alpr_ndfc->data)); + writeb(byte, &(alpr_ndfc->data)); } -static u_char pdnb3_nand_read_byte(struct mtd_info *mtd) +static u_char alpr_nand_read_byte(struct mtd_info *mtd) { - return alpr_read(&(alpr_ndfc->data)); + return readb(&(alpr_ndfc->data)); } -static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { + struct nand_chip *nand = mtd->priv; int i; -/*printf("%s chip:%d hwctl:%x size:%d\n", __FUNCTION__, alpr_chip, hwctl, len);*/ for (i = 0; i < len; i++) { if (hwctl & 0x1) - alpr_write(buf[i], &(alpr_ndfc->cmd[alpr_chip])); - else if (hwctl & 0x2) { - alpr_write(buf[i], &(alpr_ndfc->addr_wait)); - } else { - alpr_write(buf[i], &(alpr_ndfc->data)); - /*printf("i: %d\n", i);*/ - } + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(buf[i], nand->IO_ADDR_W); + else if (hwctl & 0x2) + writeb(buf[i], &(alpr_ndfc->addr_wait)); + else + writeb(buf[i], &(alpr_ndfc->data)); } } -static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { int i; for (i = 0; i < len; i++) { - buf[i] = alpr_read(&(alpr_ndfc->data)); + buf[i] = readb(&(alpr_ndfc->data)); } } -static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) { int i; for (i = 0; i < len; i++) - if (buf[i] != alpr_read(&(alpr_ndfc->data))) + if (buf[i] != readb(&(alpr_ndfc->data))) return i; return 0; } -static int pdnb3_nand_dev_ready(struct mtd_info *mtd) +static int alpr_nand_dev_ready(struct mtd_info *mtd) { -#if 1 volatile u_char val; -/*printf("%s aufruf\n", __FUNCTION__);*/ /* * Blocking read to wait for NAND to be ready */ - val = alpr_read(&(alpr_ndfc->addr_wait)); + val = readb(&(alpr_ndfc->addr_wait)); /* * Return always true */ return 1; -#else - u8 hwctl_org = hwctl; - unsigned long timeo; - u8 val; - - hwctl = 0x01; - pdnb3_nand_write_byte (mtd, NAND_CMD_STATUS); - hwctl = hwctl_org; - - reset_timer(); - while (1) { - if (get_timer(0) > timeo) { - printf("Timeout!"); - return 0; - } - -val = pdnb3_nand_read_byte(mtd); -/*printf("%s val: %x\n", __FUNCTION__, val);*/ - if (val & NAND_STATUS_READY) - break; - } - return 1; -#endif - -} - -static void alpr_select_chip(struct mtd_info *mtd, int chip) -{ - alpr_chip = chip; -} - -static int alpr_nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) -{ - unsigned long timeo; - - if (state == FL_ERASING) - timeo = CFG_HZ * 400; - else - timeo = CFG_HZ * 20; - - if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) - this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); - else - this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); - - reset_timer(); - - while (1) { - if (get_timer(0) > timeo) { - printf("Timeout!"); - return 0; - } - - if (this->read_byte(mtd) & NAND_STATUS_READY) - break; - } - return this->read_byte(mtd); } void board_nand_init(struct nand_chip *nand) @@ -252,20 +160,14 @@ void board_nand_init(struct nand_chip *nand) nand->eccmode = NAND_ECC_SOFT; - /* Set address of NAND IO lines (Using Linear Data Access Region) */ - nand->IO_ADDR_R = (void __iomem *) ((ulong) alpr_ndfc + 0x10); - nand->IO_ADDR_W = (void __iomem *) ((ulong) alpr_ndfc + 0x10); /* Reference hardware control function */ - nand->hwcontrol = pdnb3_nand_hwcontrol; + nand->hwcontrol = alpr_nand_hwcontrol; /* Set command delay time */ - nand->hwcontrol = pdnb3_nand_hwcontrol; - nand->write_byte = pdnb3_nand_write_byte; - nand->read_byte = pdnb3_nand_read_byte; - nand->write_buf = pdnb3_nand_write_buf; - nand->read_buf = pdnb3_nand_read_buf; - nand->verify_buf = pdnb3_nand_verify_buf; - nand->dev_ready = pdnb3_nand_dev_ready; - nand->select_chip = alpr_select_chip; - nand->waitfunc = alpr_nand_wait; + nand->write_byte = alpr_nand_write_byte; + nand->read_byte = alpr_nand_read_byte; + nand->write_buf = alpr_nand_write_buf; + nand->read_buf = alpr_nand_read_buf; + nand->verify_buf = alpr_nand_verify_buf; + nand->dev_ready = alpr_nand_dev_ready; } #endif diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c index 8630cc1664..363631fd84 100644 --- a/board/prodrive/common/flash.c +++ b/board/prodrive/common/flash.c @@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("ST "); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; default: printf ("Unknown Vendor "); break; } @@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; diff --git a/include/configs/alpr.h b/include/configs/alpr.h index eeafcd6119..c6731ba4d7 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -31,8 +31,9 @@ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_CLK_FREQ 33333000 /* external freq to pll */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -80,45 +81,29 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -#if 0 /* test-only */ -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ -#endif - /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ @@ -177,7 +162,7 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ "flash_nfs=run nfsargs addip addtty;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty;" \ @@ -216,24 +201,10 @@ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_88E1111_CLK_DELAY 1 /* set CLK delay on ALPR */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ -#if 0 /* test-only */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) -#else #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ @@ -250,7 +221,6 @@ CFG_CMD_FPGA | \ CFG_CMD_NAND | \ CFG_CMD_REGINFO) -#endif /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -279,15 +249,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- @@ -321,7 +288,6 @@ ist das mit den multiple Device in PS Mode erklaert ...*/ - /* FPGA program pin configuration */ #define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ #define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */ @@ -336,14 +302,12 @@ /* * NAND-FLASH stuff */ -#define CFG_MAX_NAND_DEVICE 2 -#define NAND_MAX_CHIPS 2 -#define CFG_NAND_BASE 0x50000000 /* NAND FLASH Base Address */ - -#if 0 -#define CONFIG_MTD_DEBUG -#define CONFIG_MTD_DEBUG_VERBOSE 4 -#endif +#define CFG_MAX_NAND_DEVICE 4 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE +#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \ + CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 } +#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup @@ -353,14 +317,9 @@ /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x92015480 #define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ -/* Memory Bank 1 (NAND-FLASH) initialization */ -/*#define CFG_EBC_PB1AP 0x108f4380 */ /* TODO */ -/*#define CFG_EBC_PB1AP 0x7f854380 */ /* TODO */ -/*#define CFG_EBC_PB1AP 0x108553c0 */ -/*#define CFG_EBC_PB1AP 0x108053c0 */ -#define CFG_EBC_PB1AP 0x10810180 -/*#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) *//* BS=1MB,BU=R/W,BW=8bit */ +/* Memory Bank 1 (NAND-FLASH) initialization */ +#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */ #define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ /* From 5c912cb1c31266c66ca59b36f9b6f87296421d75 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 7 Oct 2006 11:36:51 +0200 Subject: [PATCH 06/72] CFG_NAND_QUIET_TEST added to not warn upon missing NAND device Patch by Stefan Roese, 07 Oct 2006 --- CHANGELOG | 3 +++ drivers/nand/nand_base.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index a21526b971..d2d5324c11 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* CFG_NAND_QUIET_TEST added to not warn upon missing NAND device + Patch by Stefan Roese, 07 Oct 2006 + * Update ALPR code (NAND support working now) Patch by Stefan Roese, 07 Oct 2006 diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index b7a5d32fb3..b0030857c6 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -2407,7 +2407,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips) } if (!nand_flash_ids[i].name) { +#ifndef CFG_NAND_QUIET_TEST printk (KERN_WARNING "No NAND device found!!!\n"); +#endif this->select_chip(mtd, -1); return 1; } From f484dc791a3932537213c43c654cc1295c64b84c Mon Sep 17 00:00:00 2001 From: Nick Spence Date: Thu, 7 Sep 2006 07:39:46 -0700 Subject: [PATCH 07/72] Added RGMII support to the TSECs and Marvell 881111 Phy Added a phy initialization to adjust the RGMII RX and TX timing Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode Signed-off-by: Nick Spence --- drivers/tsec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tsec.c b/drivers/tsec.c index 400e593adf..6815c153d8 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -610,11 +610,10 @@ static void adjust_link(struct eth_device *dev) regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF)) | MACCFG2_MII); - /* If We're in reduced mode, we need - * to say whether we're 10 or 100 MB. + /* Set R100 bit in all modes although + * it is only used in RGMII mode */ - if ((priv->speed == 100) - && (priv->flags & TSEC_REDUCED)) + if (priv->speed == 100) regs->ecntrl |= ECNTRL_R100; else regs->ecntrl &= ~(ECNTRL_R100); @@ -816,6 +815,7 @@ struct phy_info phy_info_M88E1111S = { {0x1d, 0x5, NULL}, {0x1e, 0x0, NULL}, {0x1e, 0x100, NULL}, + {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, From 04f899fc465c3e44f2b55ecc70618f5696fc0ddf Mon Sep 17 00:00:00 2001 From: Nick Spence Date: Sat, 30 Sep 2006 00:32:59 -0700 Subject: [PATCH 08/72] NAND Flash verify across block boundaries This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is defined and the write crosses a block boundary. The pointer to the verification buffer (bufstart) is not being updated to reflect the starting of the new block so the verification of the second block fails. CHANGELOG: * Fix NAND FLASH page verification across block boundaries --- drivers/nand/nand_base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index b7a5d32fb3..6b13c4e0e3 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -1713,6 +1713,7 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, goto out; } *retlen = written; + bufstart = (u_char*) &buf[written]; ofs = autoplace ? mtd->oobavail : mtd->oobsize; if (eccbuf) From 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 Mon Sep 17 00:00:00 2001 From: Tanya Jiang Date: Thu, 3 Aug 2006 18:39:49 +0800 Subject: [PATCH 09/72] mpc83xx: Removed unused file resetvec.S for mpc83xx cpu Removed unused file resetvec.S for mpc83xx cpu Signed-off-by: Tanya Jiang --- Makefile | 3 --- cpu/mpc83xx/Makefile | 2 +- cpu/mpc83xx/resetvec.S | 6 ------ 3 files changed, 1 insertion(+), 10 deletions(-) delete mode 100644 cpu/mpc83xx/resetvec.S diff --git a/Makefile b/Makefile index 5316504be5..782893b75f 100644 --- a/Makefile +++ b/Makefile @@ -174,9 +174,6 @@ endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o endif -ifeq ($(CPU),mpc83xx) -OBJS += cpu/$(CPU)/resetvec.o -endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index b2a6b3e9c5..1aa0005d4d 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o resetvec.o +START = start.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ i2c.o spd_sdram.o diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S deleted file mode 100644 index 3dfcd0dcd5..0000000000 --- a/cpu/mpc83xx/resetvec.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .resetvec,"ax" -#ifndef FIXME -#if 0 - b _start_e500 -#endif -#endif From 3894c46c27c64891f93ac04edde86a9fa9758d92 Mon Sep 17 00:00:00 2001 From: Tanya Jiang Date: Thu, 3 Aug 2006 18:36:02 +0800 Subject: [PATCH 10/72] mpc83xx: Fix missing build for mpc8349emds pci.c Make pci build for mpc8349emds Signed-off-by: Tanya Jiang --- board/mpc8349emds/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile index acc954488f..5ec7a871d4 100644 --- a/board/mpc8349emds/Makefile +++ b/board/mpc8349emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) From f6eda7f80ccc13d658020268c507d7173cf2e8aa Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 25 Oct 2006 14:41:21 -0500 Subject: [PATCH 11/72] mpc83xx: Changed to unified mpx83xx names and added common 83xx changes Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: Dave Liu --- board/mpc8349emds/mpc8349emds.c | 6 +- cpu/mpc83xx/cpu.c | 8 +- cpu/mpc83xx/i2c.c | 8 +- cpu/mpc83xx/spd_sdram.c | 311 +++++++++++++++++++------------- cpu/mpc83xx/speed.c | 6 + include/asm-ppc/i2c.h | 4 +- include/asm-ppc/immap_83xx.h | 227 +++++++++++++---------- include/mpc83xx.h | 40 +++- 8 files changed, 383 insertions(+), 227 deletions(-) diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index b5ccb53604..6b3dedcbd9 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -168,7 +168,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile lbus8349_t *lbc= &immap->lbus; + volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; puts("\n SDRAM on Local Bus: "); @@ -246,7 +246,7 @@ void sdram_init(void) void ecc_print_status(void) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile ddr8349_t *ddr = &immap->ddr; + volatile ddr83xx_t *ddr = &immap->ddr; printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); @@ -321,7 +321,7 @@ void ecc_print_status(void) int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile ddr8349_t *ddr = &immap->ddr; + volatile ddr83xx_t *ddr = &immap->ddr; volatile u32 val; u64 *addr, count, val64; register u64 *i; diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 20bba6c66b..8d543d5c99 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -195,7 +195,7 @@ ft_cpu_setup(void *blob, bd_t *bd) void dma_init(void) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile dma8349_t *dma = &immap->dma; + volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 dmamr0 = swab32(dma->dmamr0); @@ -226,7 +226,7 @@ void dma_init(void) uint dma_check(void) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile dma8349_t *dma = &immap->dma; + volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 byte_count = swab32(dma->dmabcr0); @@ -245,7 +245,7 @@ uint dma_check(void) int dma_xfer(void *dest, u32 count, void *src) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile dma8349_t *dma = &immap->dma; + volatile dma83xx_t *dma = &immap->dma; volatile u32 dmamr0; /* initialize DMASARn, DMADAR and DMAABCRn */ diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c index 70450f9e49..723feeb44f 100644 --- a/cpu/mpc83xx/i2c.c +++ b/cpu/mpc83xx/i2c.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2006 Freescale Semiconductor, Inc. + * * (C) Copyright 2003,Motorola Inc. * Xianghua Xiao * Adapted for Motorola 85xx chip. @@ -31,6 +33,8 @@ * * 20050101: Eran Liberty (liberty@freescale.com) * Initial file creating (porting from 85XX & 8260) + * 20060601: Dave Liu (daveliu@freescale.com) + * Unified variable names for mpc83xx */ #include @@ -42,7 +46,7 @@ #include #if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) -i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET); +i2c_t * mpc83xx_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET); #endif void @@ -52,7 +56,7 @@ i2c_init(int speed, int slaveadd) writeb(0x00 , &I2C->cr); /* set clock */ - writeb(0x3f, &I2C->fdr); + writeb(speed, &I2C->fdr); /* set default filter */ writeb(0x10,&I2C->dfsrr); diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 48624feca6..153848d343 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2006 Freescale Semiconductor, Inc. + * * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -28,6 +30,10 @@ * * 20050101: Eran Liberty (liberty@freescale.com) * Initial file creating (porting from 85XX & 8260) + * 20060601: Dave Liu (daveliu@freescale.com) + * DDR ECC support + * unify variable names for 83xx + * code cleanup */ #include @@ -39,7 +45,7 @@ #ifdef CONFIG_SPD_EEPROM -#if defined(CONFIG_DDR_ECC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); extern int dma_xfer(void *dest, uint count, void *src); @@ -52,15 +58,18 @@ extern int dma_xfer(void *dest, uint count, void *src); /* * Convert picoseconds into clock cycles (rounding up if needed). */ +extern ulong get_ddr_clk(ulong dummy); int picos_to_clk(int picos) { + unsigned int ddr_bus_clk; int clks; - clks = picos / (2000000000 / (get_bus_freq(0) / 1000)); - if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) { - clks++; + ddr_bus_clk = get_ddr_clk(0) >> 1; + clks = picos / ((1000000000 / ddr_bus_clk) * 1000); + if (picos % ((1000000000 / ddr_bus_clk) * 1000) !=0) { + clks++; } return clks; @@ -104,32 +113,53 @@ static void spd_debug(spd_eeprom_t *spd) long int spd_sdram() { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile ddr8349_t *ddr = &immap->ddr; - volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0]; + volatile ddr83xx_t *ddr = &immap->ddr; + volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; spd_eeprom_t spd; - unsigned tmp, tmp1; + unsigned tmp; unsigned int memsize; unsigned int law_size; - unsigned char caslat; - unsigned int trfc, trfc_clk, trfc_low; + unsigned char caslat, caslat_ctrl; + unsigned char burstlen; + unsigned int max_bus_clk; + unsigned int max_data_rate, effective_data_rate; + unsigned int ddrc_clk; + unsigned int refresh_clk; + unsigned sdram_cfg; + unsigned int ddrc_ecc_enable; + + /* Read SPD parameters with I2C */ CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); #ifdef SPD_DEBUG spd_debug(&spd); #endif + /* Check the memory type */ + if (spd.mem_type != SPD_MEMTYPE_DDR) { + printf("DDR: Module mem type is %02X\n", spd.mem_type); + return 0; + } + + /* Check the number of physical bank */ if (spd.nrows > 2) { - puts("DDR:Only two chip selects are supported on ADS.\n"); + printf("DDR: The number of physical bank is %02X\n", spd.nrows); return 0; } - if (spd.nrow_addr < 12 - || spd.nrow_addr > 14 - || spd.ncol_addr < 8 - || spd.ncol_addr > 11) { - puts("DDR:Row or Col number unsupported.\n"); + /* Check if the number of row of the module is in the range of DDRC */ + if (spd.nrow_addr < 12 || spd.nrow_addr > 14) { + printf("DDR: Row number is out of range of DDRC, row=%02X\n", + spd.nrow_addr); return 0; } + /* Check if the number of col of the module is in the range of DDRC */ + if (spd.ncol_addr < 8 || spd.ncol_addr > 11) { + printf("DDR: Col number is out of range of DDRC, col=%02X\n", + spd.ncol_addr); + return 0; + } + /* Setup DDR chip select register */ ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1; ddr->cs_config[2] = ( 1 << 31 | (spd.nrow_addr - 12) << 8 @@ -172,54 +202,84 @@ long int spd_sdram() debug("DDR:ar=0x%08x\n", ecm->ar); /* - * find the largest CAS + * Find the largest CAS by locating the highest 1 bit + * in the spd.cas_lat field. Translate it to a DDR + * controller field value: + * + * CAS Lat DDR I Ctrl + * Clocks SPD Bit Value + * -------+--------+--------- + * 1.0 0 001 + * 1.5 1 010 + * 2.0 2 011 + * 2.5 3 100 + * 3.0 4 101 + * 3.5 5 110 + * 4.0 6 111 */ - if(spd.cas_lat & 0x40) { - caslat = 7; - } else if (spd.cas_lat & 0x20) { - caslat = 6; - } else if (spd.cas_lat & 0x10) { - caslat = 5; - } else if (spd.cas_lat & 0x08) { - caslat = 4; - } else if (spd.cas_lat & 0x04) { - caslat = 3; - } else if (spd.cas_lat & 0x02) { - caslat = 2; - } else if (spd.cas_lat & 0x01) { - caslat = 1; - } else { - puts("DDR:no valid CAS Latency information.\n"); + caslat = __ilog2(spd.cas_lat); + + if (caslat > 4 ) { + printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat); return 0; } + max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10 + + (spd.clk_cycle & 0x0f)); + max_data_rate = max_bus_clk * 2; - tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10 - + (spd.clk_cycle & 0x0f)); - debug("DDR:Module maximum data rate is: %dMhz\n", tmp); + debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - tmp1 = get_bus_freq(0) / 1000000; - if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) { - /* 90~230 range, treated as DDR 200 */ - if (spd.clk_cycle3 == 0xa0) - caslat -= 2; - else if(spd.clk_cycle2 == 0xa0) - caslat--; - } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) { - /* 230-280 range, treated as DDR 266 */ - if (spd.clk_cycle3 == 0x75) - caslat -= 2; - else if (spd.clk_cycle2 == 0x75) - caslat--; - } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) { - /* 280~350 range, treated as DDR 333 */ - if (spd.clk_cycle3 == 0x60) - caslat -= 2; - else if (spd.clk_cycle2 == 0x60) - caslat--; - } else if (tmp1 < 90 || tmp1 >= 350) { - /* DDR rate out-of-range */ - puts("DDR:platform frequency is not fit for DDR rate\n"); + ddrc_clk = get_ddr_clk(0) / 1000000; + + if (max_data_rate >= 390) { /* it is DDR 400 */ + printf("DDR: platform not support DDR 400\n"); return 0; + } else if (max_data_rate >= 323) { /* it is DDR 333 */ + if (ddrc_clk <= 350 && ddrc_clk > 280) { + /* DDRC clk at 280~350 */ + effective_data_rate = 333; /* 6ns */ + caslat = caslat; + } else if (ddrc_clk <= 280 && ddrc_clk > 230) { + /* DDRC clk at 230~280 */ + if (spd.clk_cycle2 == 0x75) { + effective_data_rate = 266; /* 7.5ns */ + caslat = caslat - 1; + } + } else if (ddrc_clk <= 230 && ddrc_clk > 90) { + /* DDRC clk at 90~230 */ + if (spd.clk_cycle3 == 0xa0) { + effective_data_rate = 200; /* 10ns */ + caslat = caslat - 2; + } + } + } else if (max_data_rate >= 256) { /* it is DDR 266 */ + if (ddrc_clk <= 350 && ddrc_clk > 280) { + /* DDRC clk at 280~350 */ + printf("DDR: DDR controller freq is more than " + "max data rate of the module\n"); + return 0; + } else if (ddrc_clk <= 280 && ddrc_clk > 230) { + /* DDRC clk at 230~280 */ + effective_data_rate = 266; /* 7.5ns */ + caslat = caslat; + } else if (ddrc_clk <= 230 && ddrc_clk > 90) { + /* DDRC clk at 90~230 */ + if (spd.clk_cycle2 == 0xa0) { + effective_data_rate = 200; /* 10ns */ + caslat = caslat - 1; + } + } + } else if (max_data_rate >= 190) { /* it is DDR 200 */ + if (ddrc_clk <= 350 && ddrc_clk > 230) { + /* DDRC clk at 230~350 */ + printf("DDR: DDR controller freq is more than " + "max data rate of the module\n"); + return 0; + } else if (ddrc_clk <= 230 && ddrc_clk > 90) { + /* DDRC clk at 90~230 */ + effective_data_rate = 200; /* 10ns */ + caslat = caslat; + } } /* @@ -229,16 +289,14 @@ long int spd_sdram() * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD, * use conservative value here. */ - trfc = spd.trfc * 1000; /* up to ps */ - trfc_clk = picos_to_clk(trfc); - trfc_low = (trfc_clk - 8) & 0xf; + caslat_ctrl = (caslat + 1) & 0x07; /* see as above */ ddr->timing_cfg_1 = (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) | - ((caslat & 0x07) << 16 ) | - (trfc_low << 12 ) | + ((caslat_ctrl & 0x07) << 16 ) | + (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) | ( 0x300 ) | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1); @@ -246,36 +304,49 @@ long int spd_sdram() debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1); debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2); + /* Setup init value, but not enable */ + ddr->sdram_cfg = 0x42000000; - /* - * Only DDR I is supported - * DDR I and II have different mode-register-set definition + /* Check DIMM data bus width */ + if (spd.dataw_lsb == 0x20) + { + burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ + printf("\n DDR DIMM: data bus width is 32 bit"); + } + else + { + burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ + printf("\n DDR DIMM: data bus width is 64 bit"); + } + + /* Is this an ECC DDR chip? */ + if (spd.config == 0x02) { + printf(" with ECC\n"); + } + else + printf(" without ECC\n"); + + /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, + Burst type is sequential */ switch(caslat) { + case 1: + ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */ + break; case 2: - tmp = 0x50; /* 1.5 */ + ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */ break; case 3: - tmp = 0x20; /* 2.0 */ + ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */ break; case 4: - tmp = 0x60; /* 2.5 */ - break; - case 5: - tmp = 0x30; /* 3.0 */ + ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */ break; default: - puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n"); + printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 " + "is supported.\n"); return 0; } -#if defined (CONFIG_DDR_32BIT) - /* set burst length to 8 for 32-bit data path */ - tmp |= 0x03; -#else - /* set burst length to 4 - default for 64-bit data path */ - tmp |= 0x02; -#endif - ddr->sdram_mode = tmp; debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode); switch(spd.refresh) { @@ -315,33 +386,15 @@ long int spd_sdram() ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100; debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval); - /* - * Is this an ECC DDR chip? - */ -#if defined(CONFIG_DDR_ECC) - if (spd.config == 0x02) { - /* disable error detection */ - ddr->err_disable = ~ECC_ERROR_ENABLE; + /* SS_EN = 0, source synchronous disable + * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd + */ + ddr->sdram_clk_cntl = 0x00000000; + debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); - /* set single bit error threshold to maximum value, - * reset counter to zero */ - ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | - (0 << ECC_ERROR_MAN_SBEC_SHIFT); - } - debug("DDR:err_disable=0x%08x\n", ddr->err_disable); - debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); -#endif asm("sync;isync"); - udelay(500); - - /* - * SS_EN=1, - * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM - * clock cycle after address/command - */ - /*ddr->sdram_clk_cntl = 0x82000000;*/ - ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05); + udelay(600); /* * Figure out the settings for the sdram_cfg register. Build up @@ -352,38 +405,48 @@ long int spd_sdram() * sdram_cfg[0] = 1 (ddr sdram logic enable) * sdram_cfg[1] = 1 (self-refresh-enable) * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM) + * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode) + * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) */ - tmp = 0xc2000000; + sdram_cfg = 0xC2000000; -#if defined (CONFIG_DDR_32BIT) - /* in 32-Bit mode burst len is 8 beats */ - tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); -#endif - /* - * sdram_cfg[3] = RD_EN - registered DIMM enable - * A value of 0x26 indicates micron registered DIMMS (micron.com) - */ - if (spd.mod_attr == 0x26) { - tmp |= 0x10000000; + /* sdram_cfg[3] = RD_EN - registered DIMM enable */ + if (spd.mod_attr & 0x02) { + sdram_cfg |= 0x10000000; } + /* The DIMM is 32bit width */ + if (spd.dataw_lsb == 0x20) { + sdram_cfg |= 0x000C0000; + } + ddrc_ecc_enable = 0; + #if defined(CONFIG_DDR_ECC) - /* - * If the user wanted ECC (enabled via sdram_cfg[2]) - */ + /* Enable ECC with sdram_cfg[2] */ if (spd.config == 0x02) { - tmp |= SDRAM_CFG_ECC_EN; + sdram_cfg |= 0x20000000; + ddrc_ecc_enable = 1; + /* disable error detection */ + ddr->err_disable = ~ECC_ERROR_ENABLE; + /* set single bit error threshold to maximum value, + * reset counter to zero */ + ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | + (0 << ECC_ERROR_MAN_SBEC_SHIFT); } + + debug("DDR:err_disable=0x%08x\n", ddr->err_disable); + debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif + printf(" DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* * Enable 2T timing by setting sdram_cfg[16]. */ - tmp |= SDRAM_CFG_2T_EN; + sdram_cfg |= SDRAM_CFG_2T_EN; #endif - - ddr->sdram_cfg = tmp; + /* Enable controller, and GO! */ + ddr->sdram_cfg = sdram_cfg; asm("sync;isync"); udelay(500); @@ -393,7 +456,7 @@ long int spd_sdram() #endif /* CONFIG_SPD_EEPROM */ -#if defined(CONFIG_DDR_ECC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) /* * Use timebase counter, get_timer() is not availabe * at this point of initialization yet. @@ -431,7 +494,7 @@ void ddr_enable_ecc(unsigned int dram_size) { uint *p; volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile ddr8349_t *ddr = &immap->ddr; + volatile ddr83xx_t *ddr= &immap->ddr; unsigned long t_start, t_end; #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) uint i; diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index ad6b3f669f..412713f322 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -337,6 +337,12 @@ int get_clocks (void) return 0; } +ulong get_ddr_clk(ulong dummy) +{ + return gd->ddr_clk; +} + + /******************************************** * get_bus_freq * return system bus freq in Hz diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h index 1680d3a7c1..2ae33670fd 100644 --- a/include/asm-ppc/i2c.h +++ b/include/asm-ppc/i2c.h @@ -91,8 +91,8 @@ typedef struct i2c /* * MPC8349 have two i2c bus */ -extern i2c_t * mpc8349_i2c; -#define I2C mpc8349_i2c +extern i2c_t * mpc83xx_i2c; +#define I2C mpc83xx_i2c #else #define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) #endif diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index c2b4c5c6ab..40624e8291 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -1,25 +1,50 @@ /* - * MPC8349 Internal Memory Map - * Copyright (c) 2004 Freescale Semiconductor. - * Eran Liberty (liberty@freescale.com) + * (C) Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * MPC83xx Internal Memory Map + * + * History : + * 20060601: Daveliu (daveliu@freescale.com) + * TanyaJiang (tanya.jiang@freescale.com) + * Unified variable names for mpc83xx + * 2005 : Mandy Lavi (mandy.lavi@freescale.com) + * support for mpc8360e + * 2004 : Eran Liberty (liberty@freescale.com) + * Initialized for mpc8349 + * based on: + * MPC8260 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * MPC85xx Internal Memory Map + * Copyright(c) 2002,2003 Motorola Inc. + * Xianghua Xiao (x.xiao@motorola.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA * - * based on: - * - MPC8260 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - MPC85xx Internal Memory Map - * Copyright(c) 2002,2003 Motorola Inc. - * Xianghua Xiao (x.xiao@motorola.com) */ -#ifndef __IMMAP_8349__ -#define __IMMAP_8349__ +#ifndef __IMMAP_83xx__ +#define __IMMAP_83xx__ +#include #include #include /* * Local Access Window. */ -typedef struct law8349 { +typedef struct law83xx { u32 bar; /* LBIU local access window base address register */ /* Identifies the 20 most-significant address bits of the base of local * access window n. The specified base address should be aligned to the @@ -28,12 +53,12 @@ typedef struct law8349 { #define LAWBAR_BAR 0xFFFFF000 #define LAWBAR_RES ~(LAWBAR_BAR) u32 ar; /* LBIU local access window attribute register */ -} law8349_t; +} law83xx_t; /* * System configuration registers. */ -typedef struct sysconf8349 { +typedef struct sysconf83xx { u32 immrbar; /* Internal memory map base address register */ u8 res0[0x04]; u32 altcbar; /* Alternate configuration base address register */ @@ -43,11 +68,11 @@ typedef struct sysconf8349 { #define ALTCBAR_BASE_ADDR 0xFFF00000 #define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ u8 res1[0x14]; - law8349_t lblaw[4]; /* LBIU local access window */ + law83xx_t lblaw[4]; /* LBIU local access window */ u8 res2[0x20]; - law8349_t pcilaw[2]; /* PCI local access window */ + law83xx_t pcilaw[2]; /* PCI local access window */ u8 res3[0x30]; - law8349_t ddrlaw[2]; /* DDR local access window */ + law83xx_t ddrlaw[2]; /* DDR local access window */ u8 res4[0x50]; u32 sgprl; /* System General Purpose Register Low */ u32 sgprh; /* System General Purpose Register High */ @@ -117,7 +142,7 @@ typedef struct sysconf8349 { #define SICRH_GPIO2_H 0x00000060 #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 -#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ +#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \ | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \ | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \ @@ -127,12 +152,12 @@ typedef struct sysconf8349 { | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ | SICRH_TSOBI2) u8 res6[0xE4]; -} sysconf8349_t; +} sysconf83xx_t; /* * Watch Dog Timer (WDT) Registers */ -typedef struct wdt8349 { +typedef struct wdt83xx { u8 res0[4]; u32 swcrr; /* System watchdog control register */ u32 swcnr; /* System watchdog count register */ @@ -140,13 +165,14 @@ typedef struct wdt8349 { #define SWCNR_RES ~(SWCNR_SWCN) u8 res1[2]; u16 swsrr; /* System watchdog service register */ +#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field.*/ u8 res2[0xF0]; -} wdt8349_t; +} wdt83xx_t; /* * RTC/PIT Module Registers */ -typedef struct rtclk8349 { +typedef struct rtclk83xx { u32 cnr; /* control register */ #define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ #define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ @@ -154,21 +180,27 @@ typedef struct rtclk8349 { #define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ #define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) u32 ldr; /* load register */ +#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be + * loaded in a 32-bit RTC counter.*/ u32 psr; /* prescale register */ - u32 ctr; /* register */ +#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits.*/ + u32 ctr; /* Counter value field register */ +#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field.*/ u32 evr; /* event register */ #define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ #define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ -#define RTEVR_RES ~(EVR_SIF | EVR_AIF) +#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) +#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit.*/ +#define PTEVR_RES ~(PTEVR_PIF) u32 alr; /* alarm register */ u8 res0[0xE8]; -} rtclk8349_t; +} rtclk83xx_t; /* * Global timper module */ -typedef struct gtm8349 { +typedef struct gtm83xx { u8 cfr1; /* Timer1/2 Configuration */ #define CFR1_PCAS 0x80 /* Pair Cascade mode */ #define CFR1_BCM 0x40 /* Backward compatible mode */ @@ -178,6 +210,8 @@ typedef struct gtm8349 { #define CFR1_GM1 0x04 /* Gate mode for pin 1 */ #define CFR1_STP1 0x02 /* Stop timer */ #define CFR1_RST1 0x01 /* Reset timer */ +#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ + CFR1_GM1 | CFR1_STP1 | CFR1_RST1) u8 res0[3]; u8 cfr2; /* Timer3/4 Configuration */ #define CFR2_PCAS 0x80 /* Pair Cascade mode */ @@ -223,13 +257,15 @@ typedef struct gtm8349 { u16 psr2; /* Timer2 Prescaler Register */ u16 psr3; /* Timer3 Prescaler Register */ u16 psr4; /* Timer4 Prescaler Register */ +#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ +#define GTPSR_RES ~(GTPSR_PPS) u8 res[0xC0]; -} gtm8349_t; +} gtm83xx_t; /* * Integrated Programmable Interrupt Controller */ -typedef struct ipic8349 { +typedef struct ipic83xx { u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ #define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ #define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ @@ -255,7 +291,7 @@ typedef struct ipic8349 { #define SIIH_UART2 0x00000040 /* UART2 interrupt */ #define SIIH_SEC 0x00000020 /* SEC interrupt */ #define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ -#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */ +#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ #define SIIH_SPI 0x00000001 /* SPI interrupt */ #define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ @@ -361,13 +397,23 @@ typedef struct ipic8349 { u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ u32 sefcr; /* System External Interrupt Force Register (SEI) */ u32 serfr; /* System Error Force Register (SERR) */ - u8 res3[0xA0]; -} ipic8349_t; + u32 scvcr; /* System Critical Interrupt Vector Register */ +#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ +#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) + u32 smvcr; /* System Management Interrupt Vector Register */ +#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ +#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) + u8 res3[0x98]; +} ipic83xx_t; /* * System Arbiter Registers */ -typedef struct arbiter8349 { +typedef struct arbiter83xx { u32 acr; /* Arbiter Configuration Register */ #define ACR_COREDIS 0x10000000 /* Core disable. */ #define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ @@ -401,12 +447,12 @@ typedef struct arbiter8349 { #define AE_ATO 0x00000001 /* Address time out. */ #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) u8 res1[0xDC]; -} arbiter8349_t; +} arbiter83xx_t; /* * Reset Module */ -typedef struct reset8349 { +typedef struct reset83xx { u32 rcwl; /* RCWL Register */ #define RCWL_LBIUCM 0x80000000 /* LBIUCM */ #define RCWL_LBIUCM_SHIFT 31 @@ -420,7 +466,7 @@ typedef struct reset8349 { #define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ #define RCWL_CEPDF 0x00000020 /* CEPDF */ #define RCWL_CEPMF 0x0000001F /* CEPMF */ -#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) +#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) u32 rcwh; /* RCHL Register */ #define RCWH_PCIHOST 0x80000000 /* PCIHOST */ #define RCWH_PCIHOST_SHIFT 31 @@ -480,9 +526,9 @@ typedef struct reset8349 { #define RCER_CRE 0x00000001 /* software hard reset */ #define RCER_RES ~(RCER_CRE) u8 res1[0xDC]; -} reset8349_t; +} reset83xx_t; -typedef struct clk8349 { +typedef struct clk83xx { u32 spmr; /* system PLL mode Register */ #define SPMR_LBIUCM 0x80000000 /* LBIUCM */ #define SPMR_DDRCM 0x40000000 /* DDRCM */ @@ -537,16 +583,16 @@ typedef struct clk8349 { #define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) u8 res0[0xF4]; -} clk8349_t; +} clk83xx_t; /* * Power Management Control Module */ -typedef struct pmc8349 { +typedef struct pmc83xx { u32 pmccr; /* PMC Configuration Register */ #define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ #define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ -#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) +#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) u32 pmcer; /* PMC Event Register */ #define PMCER_PMCI 0x00000001 /* PMC Interrupt */ #define PMCER_RES ~(PMCER_PMCI) @@ -554,13 +600,12 @@ typedef struct pmc8349 { #define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ #define PMCMR_RES ~(PMCMR_PMCIE) u8 res0[0xF4]; -} pmc8349_t; - +} pmc83xx_t; /* * general purpose I/O module */ -typedef struct gpio8349 { +typedef struct gpio83xx { u32 dir; /* direction register */ u32 odr; /* open drain register */ u32 dat; /* data register */ @@ -568,7 +613,7 @@ typedef struct gpio8349 { u32 imr; /* interrupt mask register */ u32 icr; /* external interrupt control register */ u8 res0[0xE8]; -} gpio8349_t; +} gpio83xx_t; /* * DDR Memory Controller Memory Map @@ -582,7 +627,7 @@ typedef struct ddr_cs_bnds{ u8 res0[4]; } ddr_cs_bnds_t; -typedef struct ddr8349{ +typedef struct ddr83xx { ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ u8 res0[0x60]; u32 cs_config[4]; /**< Chip Select x Configuration */ @@ -748,7 +793,7 @@ typedef struct ddr8349{ u8 res7[0xA4]; u32 debug_reg; u8 res8[0xFC]; -} ddr8349_t; +} ddr83xx_t; /* * I2C1 Controller @@ -758,7 +803,7 @@ typedef struct ddr8349{ /* * DUART */ -typedef struct duart8349{ +typedef struct duart83xx{ u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ u8 uier_udmb; /**< combined register for UIER and UDMB */ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ @@ -771,7 +816,7 @@ typedef struct duart8349{ u8 udsr; /**< DMA status register */ u8 res1[3]; u8 res2[0xEC]; -} duart8349_t; +} duart83xx_t; /* * Local Bus Controller Registers @@ -781,7 +826,7 @@ typedef struct lbus_bank{ u32 or; /**< Base Register */ } lbus_bank_t; -typedef struct lbus8349 { +typedef struct lbus83xx { lbus_bank_t bank[8]; u8 res0[0x28]; u32 mar; /**< UPM Address Register */ @@ -830,12 +875,12 @@ typedef struct lbus8349 { u8 res7[0x28]; u8 res8[0xF00]; -} lbus8349_t; +} lbus83xx_t; /* * Serial Peripheral Interface */ -typedef struct spi8349 +typedef struct spi83xx { u32 mode; /**< mode register */ u32 event; /**< event register */ @@ -845,13 +890,13 @@ typedef struct spi8349 u32 tx; /**< transmit register */ u32 rx; /**< receive register */ u8 res1[0xD8]; -} spi8349_t; +} spi83xx_t; /* * DMA/Messaging Unit */ -typedef struct dma8349 { +typedef struct dma83xx { u32 res0[0xC]; /* 0x0-0x29 reseverd */ u32 omisr; /* 0x30 Outbound message interrupt status register */ u32 omimr; /* 0x34 Outbound message interrupt mask register */ @@ -920,7 +965,7 @@ typedef struct dma8349 { u32 dmagsr; /* 0x2A8 DMA general status register */ u32 res20[0x15];/* 0x2AC-0x2FF reserved */ -} dma8349_t; +} dma83xx_t; /* DMAMRn bits */ #define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ @@ -939,7 +984,7 @@ typedef struct dma8349 { /* * PCI Software Configuration Registers */ -typedef struct pciconf8349 { +typedef struct pciconf83xx { u32 config_address; #define PCI_CONFIG_ADDRESS_EN 0x80000000 #define PCI_CONFIG_ADDRESS_BN_SHIFT 16 @@ -953,7 +998,7 @@ typedef struct pciconf8349 { u32 config_data; u32 int_ack; u8 res[116]; -} pciconf8349_t; +} pciconf83xx_t; /* * PCI Outbound Translation Register @@ -965,12 +1010,12 @@ typedef struct pci_outbound_window { u8 res1[4]; u32 pocmr; u8 res2[4]; -} pot8349_t; +} pot83xx_t; /* * Sequencer */ -typedef struct ios8349 { - pot8349_t pot[6]; +typedef struct ios83xx { + pot83xx_t pot[6]; #define POTAR_TA_MASK 0x000fffff #define POBAR_BA_MASK 0x000fffff #define POCMR_EN 0x80000000 @@ -1004,12 +1049,12 @@ typedef struct ios8349 { u8 res1[4]; u32 dtcr; u8 res2[4]; -} ios8349_t; +} ios83xx_t; /* * PCI Controller Control and Status Registers */ -typedef struct pcictrl8349 { +typedef struct pcictrl83xx { u32 esr; #define ESR_MERR 0x80000000 #define ESR_APAR 0x00000400 @@ -1124,63 +1169,63 @@ typedef struct pcictrl8349 { #define PIWAR_IWS_512M 0x0000001C #define PIWAR_IWS_1G 0x0000001D #define PIWAR_IWS_2G 0x0000001E -} pcictrl8349_t; +} pcictrl83xx_t; /* * USB */ -typedef struct usb8349 { +typedef struct usb83xx { u8 fixme[0x2000]; -} usb8349_t; +} usb83xx_t; /* * TSEC */ -typedef struct tsec8349 { +typedef struct tsec83xx { u8 fixme[0x1000]; -} tsec8349_t; +} tsec83xx_t; /* * Security */ -typedef struct security8349 { +typedef struct security83xx { u8 fixme[0x10000]; -} security8349_t; +} security83xx_t; typedef struct immap { - sysconf8349_t sysconf; /* System configuration */ - wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */ - rtclk8349_t rtc; /* Real Time Clock Module Registers */ - rtclk8349_t pit; /* Periodic Interval Timer */ - gtm8349_t gtm[2]; /* Global Timers Module */ - ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter8349_t arbiter; /* System Arbiter Registers */ - reset8349_t reset; /* Reset Module */ - clk8349_t clk; /* System Clock Module */ - pmc8349_t pmc; /* Power Management Control Module */ - gpio8349_t pgio[2]; /* general purpose I/O module */ + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t pgio[2]; /* general purpose I/O module */ u8 res0[0x200]; u8 DDL_DDR[0x100]; u8 DDL_LBIU[0x100]; u8 res1[0xE00]; - ddr8349_t ddr; /* DDR Memory Controller Memory */ + ddr83xx_t ddr; /* DDR Memory Controller Memory */ i2c_t i2c[2]; /* I2C1 Controller */ u8 res2[0x1300]; - duart8349_t duart[2];/* DUART */ + duart83xx_t duart[2];/* DUART */ u8 res3[0x900]; - lbus8349_t lbus; /* Local Bus Controller Registers */ + lbus83xx_t lbus; /* Local Bus Controller Registers */ u8 res4[0x1000]; - spi8349_t spi; /* Serial Peripheral Interface */ + spi83xx_t spi; /* Serial Peripheral Interface */ u8 res5[0xF00]; - dma8349_t dma; /* DMA */ - pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */ - ios8349_t ios; /* Sequencer */ - pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ u8 res6[0x19900]; - usb8349_t usb; - tsec8349_t tsec[2]; + usb83xx_t usb; + tsec83xx_t tsec[2]; u8 res7[0xA000]; - security8349_t security; + security83xx_t security; } immap_t; -#endif /* __IMMAP_8349__ */ +#endif /* __IMMAP_83xx__ */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index ea40bad395..d5b7bcabf4 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -29,6 +29,7 @@ #ifndef __MPC83XX_H__ #define __MPC83XX_H__ +#include #if defined(CONFIG_E300) #include #endif @@ -85,6 +86,11 @@ #define LBLAWBAR3 0x0038 #define LBLAWAR3 0x003C +/* + * The device ID and revision numbers + */ +#define SPR_8349E_REV10 0x80300100 +#define SPR_8349E_REV11 0x80300101 /* * Base Registers & Option Registers @@ -243,6 +249,12 @@ #define HRCWH_BIG_ENDIAN 0x00000000 #define HRCWH_LITTLE_ENDIAN 0x00000008 +#define HRCWH_LALE_NORMAL 0x00000000 +#define HRCWH_LALE_EARLY 0x00000004 + +#define HRCWH_LDP_SET 0x00000000 +#define HRCWH_LDP_CLEAR 0x00000002 + /* * Hard Reset Configration Word - Low */ @@ -310,4 +322,30 @@ #define LCRR_CLKDIV_8 0x00000008 #define LCRR_CLKDIV_SHIFT 0 +/* + * SCCR-System Clock Control Register + */ +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 +#define SCCR_ENCCM_0 0x00000000 +#define SCCR_ENCCM_1 0x01000000 +#define SCCR_ENCCM_2 0x02000000 +#define SCCR_ENCCM_3 0x03000000 +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + +#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ + | SCCR_TSEC2CM_3 \ + | SCCR_ENCCM_3 \ + | SCCR_USBCM_3 ) +#define SCCR_DEFAULT 0xFFFFFFFF + #endif /* __MPC83XX_H__ */ From 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 Mon Sep 17 00:00:00 2001 From: Tanya Jiang Date: Thu, 3 Aug 2006 18:38:13 +0800 Subject: [PATCH 12/72] mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros Unified TQM834x variable names with 83xx and consolidated macro in preparation for the 8360 and other upcoming 83xx devices. Signed-off-by: Tanya Jiang --- board/tqm834x/pci.c | 12 ++++++------ include/configs/TQM834x.h | 12 ++++++++++++ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c index 5a23e6c55e..d01277f808 100644 --- a/board/tqm834x/pci.c +++ b/board/tqm834x/pci.c @@ -69,17 +69,17 @@ void pci_init_board(void) { volatile immap_t * immr; - volatile clk8349_t * clk; - volatile law8349_t * pci_law; - volatile pot8349_t * pci_pot; - volatile pcictrl8349_t * pci_ctrl; - volatile pciconf8349_t * pci_conf; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; u16 reg16; u32 reg32; struct pci_controller * hose; immr = (immap_t *)CFG_IMMRBAR; - clk = (clk8349_t *)&immr->clk; + clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 4bbee97db5..b1f033d19f 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -36,6 +36,7 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC834X 1 /* MPC834X specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ @@ -56,6 +57,17 @@ */ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F From 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 22 Aug 2006 17:07:00 -0500 Subject: [PATCH 13/72] mpc83xx: Add support for variable flash memory sizes on 83xx systems CHANGELOG: * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access window registers, instead of using a hard-coded value of 8MB. Signed-off-by: Timur Tabi --- cpu/mpc83xx/start.S | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 6e02cce799..a7ed3c5b2c 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -2,7 +2,7 @@ * Copyright (C) 1998 Dan Malek * Copyright (C) 1999 Magnus Damm * Copyright (C) 2000, 2001,2002 Wolfgang Denk - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved. * * See file CREDITS for list of people who contributed to this * project. @@ -1214,8 +1214,15 @@ map_flash_by_law1: lis r4, (CFG_FLASH_BASE)@h ori r4, r4, (CFG_FLASH_BASE)@l stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */ - lis r4, (0x80000016)@h - ori r4, r4, (0x80000016)@l + + /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */ + lis r4, (0x80000012)@h + ori r4, r4, (0x80000012)@l + li r5, CFG_FLASH_SIZE +1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ + addi r4, r4, 1 + bne 1b + stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */ blr @@ -1234,17 +1241,23 @@ remap_flash_by_law0: stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */ lwz r4, OR0(r3) - lis r5, 0xFF80 /* 8M */ + lis r5, ~((CFG_FLASH_SIZE << 4) - 1) or r4, r4, r5 - stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */ + stw r4, OR0(r3) lis r4, (CFG_FLASH_BASE)@h ori r4, r4, (CFG_FLASH_BASE)@l stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */ - lis r4, (0x80000016)@h - ori r4, r4, (0x80000016)@l - stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */ + /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */ + lis r4, (0x80000012)@h + ori r4, r4, (0x80000012)@l + li r5, CFG_FLASH_SIZE +1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ + addi r4, r4, 1 + bne 1b + stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */ + xor r4, r4, r4 stw r4, LBLAWBAR1(r3) From afd6e470f639883002c7c59d562690a5cb0f4865 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 25 Oct 2006 18:45:23 -0500 Subject: [PATCH 14/72] mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it --- include/configs/TQM834x.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index b1f033d19f..f0e49007d0 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -95,6 +95,7 @@ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_BASE 0x80000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ /* buffered writes in the AMD chip set is not supported yet */ #undef CFG_FLASH_USE_BUFFER_WRITE From bed85caf872714ebf53013967a695c9d63acfc68 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 31 Oct 2006 18:13:36 -0600 Subject: [PATCH 15/72] mpc83xx: Add support for Errata DDR6 on MPC 834x systems CHANGELOG: * Errata DDR6, which affects all current MPC 834x processors, lists changes required to maintain compatibility with various types of DDR memory. This patch implements those changes. Signed-off-by: Timur Tabi --- cpu/mpc83xx/spd_sdram.c | 43 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 153848d343..8ee4234631 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -112,11 +112,14 @@ static void spd_debug(spd_eeprom_t *spd) long int spd_sdram() { +#ifdef CONFIG_MPC834X + int caslat_83xx; /* For Errata DDR6 */ +#endif volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; volatile ddr83xx_t *ddr = &immap->ddr; volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; spd_eeprom_t spd; - unsigned tmp; + unsigned int tmp, tmp1; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -282,6 +285,40 @@ long int spd_sdram() } } +#ifdef CONFIG_MPC834X +/* Errata DDR6 + This errata affects all MPC8349E, MPC8343E and MPC8347E processors. +*/ + if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */ + { + if (spd.mid[0] == 0x2c) { + /* Micron memory running at 333 MHz */ + /* Chances are, U-Boot will crash before we get here, + but just in case, display a message and return error. */ + printf("Micron DDR not supported at 333MHz CSB\n"); + return 0; + } else if (spd.mid[0] == 0xad) { + printf("Hynix DDR does not require Errata DDR6\n"); + } else { + /* enable 2 cycle Earlier for CL=2.5 or 3 */ + ddr->debug_reg = 0x202c0000; + printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg); + } + caslat_83xx = caslat; + } + + if ((tmp1 >= 230) && (tmp1 < 280)) { /* CSB=266 */ + if (spd.mid[0] != 0x2c) /* non-Micron */ + caslat_83xx = caslat - 1; + + } + + if ((tmp1 >= 90) && (tmp1 < 230)) { /* CSB=200 */ + caslat = 3; + caslat_83xx = 2; + } +#endif + /* * note: caslat must also be programmed into ddr->sdram_mode * register. @@ -295,7 +332,11 @@ long int spd_sdram() (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) | +#ifdef CONFIG_MPC834x + ((caslat_83xx & 0x07) << 16 ) | +#else ((caslat_ctrl & 0x07) << 16 ) | +#endif (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) | ( 0x300 ) | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1); From bb99ad6d8257bf828f150d40f507b30d80a4a7ae Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Thu, 7 Sep 2006 16:50:54 -0400 Subject: [PATCH 16/72] Add support for multiple I2C buses Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: Ben Warren Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben --- README | 42 ++++++++++++- common/cmd_i2c.c | 159 +++++++++++++++++++++++++++++++++++++++++++++-- include/i2c.h | 45 ++++++++++++++ 3 files changed, 240 insertions(+), 6 deletions(-) diff --git a/README b/README index b78ea6124d..6b94f8482c 100644 --- a/README +++ b/README @@ -1207,7 +1207,12 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_I2C_CMD_TREE is a recommended option that places + all I2C commands under a single 'i2c' root command. The + older 'imm', 'imd', 'iprobe' etc. commands are considered + deprecated and may disappear in the future. + + CONFIG_HARD_I2C selects a hardware I2C controller. CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware @@ -1312,6 +1317,31 @@ The following options need to be configured: in u-boot bd_info structure based on u-boot environment variable "i2cfast". (see also i2cfast) + CONFIG_I2C_MULTI_BUS + + This option allows the use of multiple I2C buses, each of which + must have a controller. At any point in time, only one bus is + active. To switch to a different bus, use the 'i2c dev' command. + Note that bus numbering is zero-based. + + CFG_I2C_NOPROBES + + This option specifies a list of I2C devices that will be skipped + when the 'i2c probe' command is issued (or 'iprobe' using the legacy + command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device + pairs. Otherwise, specify a 1D array of device addresses + + e.g. + #undef CONFIG_I2C_MULTI_BUS + #define CFG_I2C_NOPROBES {0x50,0x68} + + will skip addresses 0x50 and 0x68 on a board with one I2C bus + + #define CONFIG_I2C_MULTI_BUS + #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} + + will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with @@ -2209,6 +2239,16 @@ Low Level (hardware related) configuration options: CFG_POCMR2_MASK_ATTRIB: (MPC826x only) Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. +- CONFIG_SPD_EEPROM + Get DDR timing information from an I2C EEPROM. Common with pluggable + memory modules such as SODIMMs + SPD_EEPROM_ADDRESS + I2C address of the SPD EEPROM + +- CFG_SPD_BUS_NUM + If SPD EEPROM is on an I2C bus other than the first one, specify here. + Note that the value must resolve to something your driver can deal with. + - CONFIG_ETHER_ON_FEC[12] Define to enable FEC[12] on a 8xx series processor. diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index c543bb5314..62378af8a2 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -101,8 +101,31 @@ static uchar i2c_mm_last_chip; static uint i2c_mm_last_addr; static uint i2c_mm_last_alen; +/* If only one I2C bus is present, the list of devices to ignore when + * the probe command is issued is represented by a 1D array of addresses. + * When multiple buses are present, the list is an array of bus-address + * pairs. The following macros take care of this */ + #if defined(CFG_I2C_NOPROBES) +#if defined(CONFIG_I2C_MULTI_BUS) +static struct +{ + uchar bus; + uchar addr; +} i2c_no_probes[] = CFG_I2C_NOPROBES; +#define GET_BUS_NUM i2c_get_bus_num() +#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b)) +#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a)) +#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr +#else /* single bus */ static uchar i2c_no_probes[] = CFG_I2C_NOPROBES; +#define GET_BUS_NUM 0 +#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ +#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) +#define NO_PROBE_ADDR(i) i2c_no_probes[(i)] +#endif /* CONFIG_MULTI_BUS */ + +#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) #endif static int @@ -538,14 +561,17 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int j; #if defined(CFG_I2C_NOPROBES) int k, skip; -#endif + uchar bus = GET_BUS_NUM; +#endif /* NOPROBES */ puts ("Valid chip addresses:"); for(j = 0; j < 128; j++) { #if defined(CFG_I2C_NOPROBES) skip = 0; - for (k = 0; k < sizeof(i2c_no_probes); k++){ - if (j == i2c_no_probes[k]){ + for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) + { + if(COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) + { skip = 1; break; } @@ -561,8 +587,11 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CFG_I2C_NOPROBES) puts ("Excluded chip addresses:"); - for( k = 0; k < sizeof(i2c_no_probes); k++ ) - printf(" %02X", i2c_no_probes[k] ); + for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) + { + if(COMPARE_BUS(bus,k)) + printf(" %02X", NO_PROBE_ADDR(k)); + } putc ('\n'); #endif @@ -873,6 +902,104 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #endif /* CFG_CMD_SDRAM */ +#if defined(CONFIG_I2C_CMD_TREE) +#if defined(CONFIG_I2C_MULTI_BUS) +int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int bus_idx, ret=0; + + if (argc == 1) /* querying current setting */ + { + printf("Current bus is %d\n", i2c_get_bus_num()); + } + else + { + bus_idx = simple_strtoul(argv[1], NULL, 10); + printf("Setting bus to %d\n", bus_idx); + ret = i2c_set_bus_num(bus_idx); + if(ret) + { + printf("Failure changing bus number (%d)\n", ret); + } + } + return ret; +} +#endif /* CONFIG_I2C_MULTI_BUS */ + +int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int speed, ret=0; + + if (argc == 1) /* querying current speed */ + { + printf("Current bus speed=%d\n", i2c_get_bus_speed()); + } + else + { + speed = simple_strtoul(argv[1], NULL, 10); + printf("Setting bus speed to %d Hz\n", speed); + ret = i2c_set_bus_speed(speed); + if(ret) + { + printf("Failure changing bus speed (%d)\n", ret); + } + } + return ret; +} + +int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ +#if defined(CONFIG_I2C_MULTI_BUS) + if(!strncmp(argv[1], "de", 2)) + { + return do_i2c_bus_num(cmdtp, flag, --argc, ++argv); + } +#endif /* CONFIG_I2C_MULTI_BUS */ + if(!strncmp(argv[1], "sp", 2)) + { + return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "md", 2)) + { + return do_i2c_md(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "mm", 2)) + { + return do_i2c_mm(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "mw", 2)) + { + return do_i2c_mw(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "nm", 2)) + { + return do_i2c_nm(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "cr", 2)) + { + return do_i2c_crc(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "pr", 2)) + { + return do_i2c_probe(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "lo", 2)) + { + return do_i2c_loop(cmdtp, flag, --argc, ++argv); + } +#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) + if(!strncmp(argv[1], "sd", 2)) + { + return do_sdram(cmdtp, flag, --argc, ++argv); + } +#endif /* CFG_CMD_SDRAM */ + else + { + printf ("Usage:\n%s\n", cmdtp->usage); + } + return 0; +} +#endif /* CONFIG_I2C_CMD_TREE */ /***************************************************/ @@ -930,4 +1057,26 @@ U_BOOT_CMD( " (valid chip values 50..57)\n" ); #endif + +#if defined(CONFIG_I2C_CMD_TREE) +U_BOOT_CMD( + i2c, 6, 1, do_i2c, + "i2c - I2C sub-system\n", +#if defined(CONFIG_I2C_MULTI_BUS) + "dev [dev] - show or set current I2C bus\n" +#endif /* CONFIG_I2C_MULTI_BUS */ + "i2c speed [speed] - show or set I2C bus speed\n" + "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n" + "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" + "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" + "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" + "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" + "i2c probe - show devices on the I2C bus\n" + "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" +#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) + "i2c sdram chip - print SDRAM configuration information\n" +#endif /* CFG_CMD_SDRAM */ +); +#endif /* CONFIG_I2C_CMD_TREE */ + #endif /* CFG_CMD_I2C */ diff --git a/include/i2c.h b/include/i2c.h index 6d39080d8f..97e006163a 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -82,4 +82,49 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len); uchar i2c_reg_read (uchar chip, uchar reg); void i2c_reg_write(uchar chip, uchar reg, uchar val); +/* + * Functions for setting the current I2C bus and its speed + */ + +/* + * i2c_set_bus_num: + * + * Change the active I2C bus. Subsequent read/write calls will + * go to this one. + * + * bus - bus index, zero based + * + * Returns: 0 on success, not 0 on failure + * + */ +int i2c_set_bus_num(uchar bus); + +/* + * i2c_get_bus_num: + * + * Returns index of currently active I2C bus. Zero-based. + */ + +uchar i2c_get_bus_num(void); + +/* + * i2c_set_bus_speed: + * + * Change the speed of the active I2C bus + * + * speed - bus speed in Hz + * + * Returns: 0 on success, not 0 on failure + * + */ +int i2c_set_bus_speed(int); + +/* + * i2c_get_bus_speed: + * + * Returns speed of currently active I2C bus in Hz + */ + +int i2c_get_bus_speed(void); + #endif /* _I2C_H_ */ From b24f119d672b709d153ff2ac091d4aa63ec6877d Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Thu, 7 Sep 2006 16:51:04 -0400 Subject: [PATCH 17/72] Multi-bus I2C implementation of MPC834x Hello, Attached is a patch implementing multiple I2C buses on the MPC834x CPU family and the MPC8349EMDS board in particular. This patch requires Patch 1 (Add support for multiple I2C buses). Testing was performed on a 533MHz board. /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ Signed-off-by: Ben Warren CHANGELOG: Implemented driver-level code to support two I2C buses on the MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds are 50kHz, 100kHz and 400kHz on each bus. regards, Ben --- cpu/mpc83xx/i2c.c | 168 +++++++++++++++++++++++++++++----- include/asm-ppc/i2c.h | 21 +++-- include/configs/MPC8349EMDS.h | 6 +- 3 files changed, 160 insertions(+), 35 deletions(-) diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c index 723feeb44f..fc89fb1e25 100644 --- a/cpu/mpc83xx/i2c.c +++ b/cpu/mpc83xx/i2c.c @@ -45,37 +45,123 @@ #include #include -#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) -i2c_t * mpc83xx_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET); +DECLARE_GLOBAL_DATA_PTR; + +/* Three I2C bus speeds are supported here (50kHz, 100kHz + * and 400kHz). It should be easy to add more. Note that + * the maximum bus speed for I2C bus 1 is CSB/3, while I2C + * bus 2 can go as high as CSB. + * Typical values for CSB are 266MHz and 200MHz. */ + + /* 50kH 100kHz 400kHz */ +static const uchar speed_map_266[][3] = + {{0x2e, 0x2a, 0x20}, /* base 88MHz */ + {0x34, 0x30, 0x28}}; /* base 266 MHz */ + +static const uchar speed_map_200[][3] = + {{0x2c, 0x28, 0x20}, /* base 66 MHz */ + {0x33, 0x2f, 0x26}}; /* base 200 MHz */ + +/* Initialize the bus pointer to whatever one the SPD EEPROM is on. + * Default is bus 1. This is necessary because the DDR initialization + * runs from ROM, and we can't switch buses because we can't modify + * the i2c_dev variable. Everything gets straightened out once i2c_init + * is called from RAM. */ + +#if defined CFG_SPD_BUS_NUM +static i2c_t *i2c_dev = CFG_SPD_BUS_NUM; +#else +static i2c_t *i2c_dev = I2C_1; #endif -void -i2c_init(int speed, int slaveadd) +static uchar busNum = I2C_BUS_1 ; +static int bus_speed[2] = {0, 0}; + +static int set_speed(int speed) +{ + uchar value; + const uchar *spdPtr; + + /* Global data contains maximum I2C bus 1 speed, which is CSB/3 */ + if(gd->i2c_clk == 88000000) + { + spdPtr = speed_map_266[busNum]; + } + else if(gd->i2c_clk == 66000000) + { + spdPtr = speed_map_200[busNum]; + } + else + { + printf("Max I2C bus speed %d not supported\n", gd->i2c_clk); + return -1; + } + + switch(speed) + { + case 50000: + value = *(spdPtr + 0); + break; + case 100000: + value = *(spdPtr + 1); + break; + case 400000: + value = *(spdPtr + 2); + break; + default: + printf("I2C bus speed %d not supported\n", speed); + return -2; + } + /* set clock */ + writeb(value, &i2c_dev->fdr); + bus_speed[busNum] = speed; + return 0; +} + + +static void _i2c_init(int speed, int slaveadd) { /* stop I2C controller */ - writeb(0x00 , &I2C->cr); + writeb(0x00 , &i2c_dev->cr); /* set clock */ - writeb(speed, &I2C->fdr); + writeb(speed, &i2c_dev->fdr); /* set default filter */ - writeb(0x10,&I2C->dfsrr); + writeb(0x10,&i2c_dev->dfsrr); /* write slave address */ - writeb(slaveadd, &I2C->adr); + writeb(slaveadd, &i2c_dev->adr); /* clear status register */ - writeb(0x00, &I2C->sr); + writeb(0x00, &i2c_dev->sr); /* start I2C controller */ - writeb(I2C_CR_MEN, &I2C->cr); + writeb(I2C_CR_MEN, &i2c_dev->cr); +} + +void i2c_init(int speed, int slaveadd) +{ + /* Set both interfaces to the same speed and slave address */ + /* Note: This function gets called twice - before and after + * relocation to RAM. The first time it's called, we are unable + * to change buses, so whichever one 'i2c_dev' was initialized to + * gets set twice. When run from RAM both buses get set properly */ + + i2c_set_bus_num(I2C_BUS_1); + _i2c_init(speed, slaveadd); +#ifdef CFG_I2C2_OFFSET + i2c_set_bus_num(I2C_BUS_2); + _i2c_init(speed, slaveadd); + i2c_set_bus_num(I2C_BUS_1); +#endif /* CFG_I2C2_OFFSET */ } static __inline__ int i2c_wait4bus (void) { ulong timeval = get_timer (0); - while (readb(&I2C->sr) & I2C_SR_MBB) { + while (readb(&i2c_dev->sr) & I2C_SR_MBB) { if (get_timer (timeval) > I2C_TIMEOUT) { return -1; } @@ -89,12 +175,12 @@ i2c_wait (int write) u32 csr; ulong timeval = get_timer(0); do { - csr = readb(&I2C->sr); + csr = readb(&i2c_dev->sr); if (!(csr & I2C_SR_MIF)) continue; - writeb(0x0, &I2C->sr); + writeb(0x0, &i2c_dev->sr); if (csr & I2C_SR_MAL) { debug("i2c_wait: MAL\n"); @@ -123,9 +209,9 @@ i2c_write_addr (u8 dev, u8 dir, int rsta) { writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | (rsta?I2C_CR_RSTA:0), - &I2C->cr); + &i2c_dev->cr); - writeb((dev << 1) | dir, &I2C->dr); + writeb((dev << 1) | dir, &i2c_dev->dr); if (i2c_wait (I2C_WRITE) < 0) return 0; @@ -138,10 +224,10 @@ __i2c_write (u8 *data, int length) int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, - &I2C->cr); + &i2c_dev->cr); for (i=0; i < length; i++) { - writeb(data[i], &I2C->dr); + writeb(data[i], &i2c_dev->dr); if (i2c_wait (I2C_WRITE) < 0) break; @@ -156,10 +242,10 @@ __i2c_read (u8 *data, int length) writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), - &I2C->cr); + &i2c_dev->cr); /* dummy read */ - readb(&I2C->dr); + readb(&i2c_dev->dr); for (i=0; i < length; i++) { if (i2c_wait (I2C_READ) < 0) @@ -169,13 +255,13 @@ __i2c_read (u8 *data, int length) if (i == length - 2) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, - &I2C->cr); + &i2c_dev->cr); /* Generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr); + writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr); - data[i] = readb(&I2C->dr); + data[i] = readb(&i2c_dev->dr); } return i; } @@ -201,7 +287,7 @@ i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) i = __i2c_read (data, length); exit: - writeb(I2C_CR_MEN, &I2C->cr); + writeb(I2C_CR_MEN, &i2c_dev->cr); return !(i == length); } @@ -223,7 +309,7 @@ i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) i = __i2c_write (data, length); exit: - writeb(I2C_CR_MEN, &I2C->cr); + writeb(I2C_CR_MEN, &i2c_dev->cr); return !(i == length); } @@ -254,4 +340,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) i2c_write (i2c_addr, reg, 1, &val, 1); } +int i2c_set_bus_num(uchar bus) +{ + if(bus == I2C_BUS_1) + { + i2c_dev = I2C_1; + } +#ifdef CFG_I2C2_OFFSET + else if(bus == I2C_BUS_2) + { + i2c_dev = I2C_2; + } +#endif /* CFG_I2C2_OFFSET */ + else + { + return -1; + } + busNum = bus; + return 0; +} + +int i2c_set_bus_speed(int speed) +{ + return set_speed(speed); +} + +uchar i2c_get_bus_num(void) +{ + return busNum; +} + +int i2c_get_bus_speed(void) +{ + return bus_speed[busNum]; +} #endif /* CONFIG_HARD_I2C */ diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h index 2ae33670fd..baf9d9a262 100644 --- a/include/asm-ppc/i2c.h +++ b/include/asm-ppc/i2c.h @@ -79,6 +79,12 @@ typedef struct i2c #endif #define I2C_TIMEOUT (CFG_HZ/4) +enum I2C_BUS_NUM +{ + I2C_BUS_1 = 0, + I2C_BUS_2, +}; + #ifndef CFG_IMMRBAR #error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h #endif @@ -87,15 +93,12 @@ typedef struct i2c #error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h #endif -#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) -/* - * MPC8349 have two i2c bus - */ -extern i2c_t * mpc83xx_i2c; -#define I2C mpc83xx_i2c -#else -#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) -#endif +#define I2C_1 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) + +/* Optional support for second I2C bus */ +#ifdef CFG_I2C2_OFFSET +#define I2C_2 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET)) +#endif /* CFG_I2C2_OFFSET */ #define I2C_READ 1 #define I2C_WRITE 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 66f164660e..4d5ad57192 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -35,7 +35,7 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC834X 1 /* MPC834X family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ @@ -311,9 +311,11 @@ /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 From 183da6d9b446cc12123455844ad1187e2375626f Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Tue, 12 Sep 2006 10:15:53 -0400 Subject: [PATCH 18/72] Additional MPC8349 support for multibus i2c Hello, Here is a patch for a file that was accidentally left out of a previous attempt. It accompanies the patch with ticket DNX#2006090742000024 CHANGELOG: Change PCI initialization to use new multi-bus I2C API. regards, Ben --- board/mpc8349emds/pci.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index 63e4405578..a4d6508bb0 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -68,11 +68,16 @@ static struct pci_controller pci_hose[] = { void pib_init(void) { - u8 val8; + u8 val8, orig_i2c_bus; /* * Assign PIB PMC slot to desired PCI bus */ - mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET); + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + + if(orig_i2c_bus != I2C_BUS_2) + i2c_set_bus_num(I2C_BUS_2); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); val8 = 0; @@ -118,6 +123,9 @@ pib_init(void) printf("PCI1: 32-bit on PMC1, PMC2\n"); printf("PCI2: 32-bit on PMC3\n"); #endif + /* Reset to original I2C bus */ + if(orig_i2c_bus != I2C_BUS_2) + i2c_set_bus_num(orig_i2c_bus); } /************************************************************************** From 2ad6b513b31070bd0c003792ed1c3e7f5d740357 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 31 Oct 2006 18:44:42 -0600 Subject: [PATCH 19/72] mpc83xx: Add support for the MPC8349E-mITX PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi --- CREDITS | 5 + MAINTAINERS | 4 + MAKEALL | 2 +- Makefile | 3 + README | 8 + board/mpc8349emds/pci.c | 12 +- board/mpc8349itx/Makefile | 48 +++ board/mpc8349itx/config.mk | 33 ++ board/mpc8349itx/mpc8349itx.c | 461 +++++++++++++++++++++ board/mpc8349itx/pci.c | 337 +++++++++++++++ board/mpc8349itx/u-boot.lds | 120 ++++++ cpu/mpc83xx/cpu.c | 81 +++- cpu/mpc83xx/cpu_init.c | 31 ++ cpu/mpc83xx/spd_sdram.c | 21 + drivers/tsec.c | 4 +- include/asm-ppc/immap_83xx.h | 16 + include/configs/MPC8349ITX.h | 753 ++++++++++++++++++++++++++++++++++ 17 files changed, 1926 insertions(+), 13 deletions(-) create mode 100644 board/mpc8349itx/Makefile create mode 100644 board/mpc8349itx/config.mk create mode 100644 board/mpc8349itx/mpc8349itx.c create mode 100644 board/mpc8349itx/pci.c create mode 100644 board/mpc8349itx/u-boot.lds create mode 100644 include/configs/MPC8349ITX.h diff --git a/CREDITS b/CREDITS index 3f7b510556..802158879f 100644 --- a/CREDITS +++ b/CREDITS @@ -465,3 +465,8 @@ N: James MacAulay E: james.macaulay@amirix.com D: Suppport for Amirix AP1000 W: www.amirix.com + +N: Timur Tabi +E: timur@freescale.com +D: Support for MPC8349E-mITX +W: www.freescale.com diff --git a/MAINTAINERS b/MAINTAINERS index 8bb38b5f2e..aaa0825090 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -339,6 +339,10 @@ John Zhan svm_sc8xx MPC8xx +Timur Tabi + + MPC8349E-mITX MPC8349 + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 879a17f9cc..c29dd54f93 100755 --- a/MAKEALL +++ b/MAKEALL @@ -130,7 +130,7 @@ LIST_8260=" \ ######################################################################### LIST_83xx=" \ - TQM834x MPC8349EMDS \ + TQM834x MPC8349EMDS MPC8349ITX \ " diff --git a/Makefile b/Makefile index 782893b75f..ac7ca4a561 100644 --- a/Makefile +++ b/Makefile @@ -1591,6 +1591,9 @@ TQM834x_config: unconfig MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds +MPC8349ITX_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx + ######################################################################### ## MPC85xx Systems ######################################################################### diff --git a/README b/README index 6b94f8482c..5c907c8f07 100644 --- a/README +++ b/README @@ -2249,6 +2249,14 @@ Low Level (hardware related) configuration options: If SPD EEPROM is on an I2C bus other than the first one, specify here. Note that the value must resolve to something your driver can deal with. +- CFG_83XX_DDR_USES_CS0 + Only for 83xx systems. If specified, then DDR should be configured + using CS0 and CS1 instead of CS2 and CS3. + +- CFG_83XX_DDR_USES_CS0 + Only for 83xx systems. If specified, then DDR should be configured + using CS0 and CS1 instead of CS2 and CS3. + - CONFIG_ETHER_ON_FEC[12] Define to enable FEC[12] on a 8xx series processor. diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index a4d6508bb0..a916245aea 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -138,18 +138,18 @@ void pci_init_board(void) { volatile immap_t * immr; - volatile clk8349_t * clk; - volatile law8349_t * pci_law; - volatile pot8349_t * pci_pot; - volatile pcictrl8349_t * pci_ctrl; - volatile pciconf8349_t * pci_conf; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; u16 reg16; u32 reg32; u32 dev; struct pci_controller * hose; immr = (immap_t *)CFG_IMMRBAR; - clk = (clk8349_t *)&immr->clk; + clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile new file mode 100644 index 0000000000..31bcdb8642 --- /dev/null +++ b/board/mpc8349itx/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk new file mode 100644 index 0000000000..2e113118bd --- /dev/null +++ b/board/mpc8349itx/config.mk @@ -0,0 +1,33 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349ITX +# + +TEXT_BASE = 0xFEF00000 + +ifneq ($(OBJTREE),$(SRCTREE)) +# We are building u-boot in a separate directory, use generated +# .lds script from OBJTREE directory. +LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds +endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c new file mode 100644 index 0000000000..9a5cbec858 --- /dev/null +++ b/board/mpc8349itx/mpc8349itx.c @@ -0,0 +1,461 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PCI +#include +#include +#endif + +#ifdef CONFIG_SPD_EEPROM +#include +#else +#include +#endif + +#ifndef CONFIG_SPD_EEPROM +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 ddr_size; /* The size of RAM, in bytes */ + u32 ddr_size_log2 = 0; + + for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + if (ddr_size & 1) { + return -1; + } + ddr_size_log2++; + } + + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + + /* Only one CS0 for DDR */ + im->ddr.csbnds[0].csbnds = 0x0000000f; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); + + debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); + debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_mode = + (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); + im->ddr.sdram_interval = + (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << + SDRAM_INTERVAL_BSTOPRE_SHIFT); + im->ddr.sdram_clk_cntl = + DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05; + + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); + debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); + debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); + debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); + + return CFG_DDR_SIZE; +} +#endif + +#ifdef CONFIG_PCI +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxmitx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + 0x0f, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif + +volatile static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + } +}; +#endif /* CONFIG_PCI */ + +/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. +*/ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbc = &immap->lbus; + +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) \ + && !defined(CONFIG_COMPACT_FLASH) + + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); + print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733; precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /*0x48636733; auto refresh */ + asm("sync"); + *sdram_addr = 0xff; /*1 time*/ + udelay(100); + *sdram_addr = 0xff; /*2 times*/ + udelay(100); + *sdram_addr = 0xff; /*3 times*/ + udelay(100); + *sdram_addr = 0xff; /*4 times*/ + udelay(100); + *sdram_addr = 0xff; /*5 times*/ + udelay(100); + *sdram_addr = 0xff; /*6 times*/ + udelay(100); + *sdram_addr = 0xff; /*7 times*/ + udelay(100); + *sdram_addr = 0xff; /*8 times*/ + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_4; /*0x58636733;mode register write operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /*0x40636733;normal operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + +#else + puts("SDRAM on Local Bus is NOT available!\n"); + +#ifdef CFG_BR2_PRELIM + lbc->bank[2].br = CFG_BR2_PRELIM; + lbc->bank[2].or = CFG_OR2_PRELIM; +#endif + +#ifdef CFG_BR3_PRELIM + lbc->bank[3].br = CFG_BR3_PRELIM; + lbc->bank[3].or = CFG_OR3_PRELIM; +#endif +#endif +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 msize = 0; +#ifdef CONFIG_DDR_ECC + volatile ddr83xx_t *ddr = &im->ddr; +#endif + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#ifdef CONFIG_SPD_EEPROM + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#ifdef CONFIG_DDR_ECC + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + /* Unlike every other board, on the 83xx spd_sdram() returns + megabytes instead of just bytes. That's why we need to + multiple by 1MB when calling ddr_enable_ecc(). */ + ddr_enable_ecc(msize * 1048576); +#endif + + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef CONFIG_HARD_I2C + u8 i2c_data; +#endif + + puts("Board: Freescale MPC8349E-mITX"); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(I2C_BUS_2); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == + 0) + printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1, + i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) + == 0) + printf(" %u.%u (PCF8475)", (i2c_data & 0x02) >> 1, + i2c_data & 0x01); + else + printf(" ?.?"); +#endif + + puts("\n"); + + return 0; +} + +/** + * Implement a work-around for a hardware problem with compact + * flash. + * + * Program the UPM if compact flash is enabled. + */ +int misc_init_f(void) +{ + volatile u32 *vsc7385_cpuctrl; + + /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up + default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That + means it is 0 when the IRQ is not active. This makes the wire-AND + logic always assert IRQ7 to CPU even if there is no request from the + switch. Since the compact flash and the switch share the same IRQ, + the Linux kernel will think that the compact flash is requesting irq + and get stuck when it tries to clear the IRQ. Thus we need to set + the L2_IRQ0 and L2_IRQ1 to active low. + + The following code sets the L1_IRQ and L2_IRQ polarity to active low. + Without this code, compact flash will not work in Linux because + unlike U-Boot, Linux uses the IRQ, so this code is necessary if we + don't enable compact flash for U-Boot. + */ + + vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); + *vsc7385_cpuctrl |= 0x0c; + +#ifdef CONFIG_COMPACT_FLASH + /* UPM Table Configuration Code */ + static uint UPMATable[] = { + 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, + 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, + 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + }; + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbus = &immap->lbus; + + lbus->bank[3].br = CFG_BR3_PRELIM; + lbus->bank[3].or = CFG_OR3_PRELIM; + + /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, + GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 + */ + lbus->mamr = 0x08404440; + + upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + puts("UPMA: Configured for compact flash\n"); +#endif + + return 0; +} + +/** + * Make sure the EEPROM has the HRCW correctly programmed. + * Make sure the RTC is correctly programmed. + * + * The MPC8349E-mITX can be configured to load the HRCW from + * EEPROM instead of flash. This is controlled via jumpers + * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all + * jumpered), but if they're set to 001 or 010, then the HRCW is + * read from the "I2C EEPROM". + * + * This function makes sure that the I2C EEPROM is programmed + * correctly. + */ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_HARD_I2C + + uchar orig_bus = i2c_get_bus_num();; + +#ifdef CFG_I2C_RTC_ADDR + char ds1339_data[17]; +#endif + +#ifdef CFG_I2C_EEPROM_ADDR + static u8 eeprom_data[] = /* HRCW data */ + { + 0xaa, 0x55, 0xaa, + 0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00, + 0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00, + }; + + u8 data[sizeof(eeprom_data)]; + + i2c_set_bus_num(I2C_BUS_1); + + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (memcmp(data, eeprom_data, sizeof(data)) != 0) { + if (i2c_write + (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, + sizeof(eeprom_data)) != 0) { + puts("Failure writing the HRCW to EEPROM via I2C.\n"); + rc = 1; + } + } + } else { + puts("Failure reading the HRCW from EEPROM via I2C.\n"); + rc = 1; + } +#endif + +#ifdef CFG_I2C_RTC_ADDR + i2c_set_bus_num(I2C_BUS_2); + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) + == 0) { + + /* Work-around for MPC8349E-mITX bug #13601. + If the RTC does not contain valid register values, the DS1339 + Linux driver will not work. + */ + + /* Make sure status register bits 6-2 are zero */ + ds1339_data[0x0f] &= ~0x7c; + + /* Check for a valid day register value */ + ds1339_data[0x03] &= ~0xf8; + if (ds1339_data[0x03] == 0) { + ds1339_data[0x03] = 1; + } + + /* Check for a valid date register value */ + ds1339_data[0x04] &= ~0xc0; + if ((ds1339_data[0x04] == 0) || + ((ds1339_data[0x04] & 0x0f) > 9) || + (ds1339_data[0x04] >= 0x32)) { + ds1339_data[0x04] = 1; + } + + /* Check for a valid month register value */ + ds1339_data[0x05] &= ~0x60; + + if ((ds1339_data[0x05] == 0) || + ((ds1339_data[0x05] & 0x0f) > 9) || + ((ds1339_data[0x05] >= 0x13) + && (ds1339_data[0x05] <= 0x19))) { + ds1339_data[0x05] = 1; + } + + /* Enable Oscillator and rate select */ + ds1339_data[0x0e] = 0x1c; + + /* Work-around for MPC8349E-mITX bug #13330. + Ensure that the RTC control register contains the value 0x1c. + This affects SATA performance. + */ + + if (i2c_write + (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, + sizeof(ds1339_data))) { + puts("Failure writing to the RTC via I2C.\n"); + rc = 1; + } + } else { + puts("Failure reading from the RTC via I2C.\n"); + rc = 1; + } +#endif + + i2c_set_bus_num(orig_bus); +#endif + + return rc; +} diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c new file mode 100644 index 0000000000..247b3a6ecc --- /dev/null +++ b/board/mpc8349itx/pci.c @@ -0,0 +1,337 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_PCI + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349itx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_IDSEL_NUMBER, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void pci_init_board(void) +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + u8 reg8; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller *hose; + + immr = (immap_t *) CFG_IMMRBAR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(I2C_BUS_2); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if (reg8 & I2C_8574_PCI66) + clk->occr = 0xff000000; /* 66 MHz PCI */ + else + clk->occr = 0xff600001; /* 33 MHz PCI */ + } else { + clk->occr = 0xff600001; /* 33 MHz PCI */ + } +#else + clk->occr = 0xff000000; /* 66 MHz PCI */ +#endif + + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; i++) + udelay(1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = + POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & + POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = + POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = + POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR + 0x8380), (CFG_IMMRBAR + 0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif +} + +#endif /* CONFIG_PCI */ diff --git a/board/mpc8349itx/u-boot.lds b/board/mpc8349itx/u-boot.lds new file mode 100644 index 0000000000..f044c0f00e --- /dev/null +++ b/board/mpc8349itx/u-boot.lds @@ -0,0 +1,120 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 8d543d5c99..4e82a8b789 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -69,9 +69,72 @@ int checkcpu(void) } +/** + * Program a UPM with the code supplied in the table. + * + * The 'dummy' variable is used to increment the MAD. 'dummy' is + * supposed to be a pointer to the memory of the device being + * programmed by the UPM. The data in the MDR is written into + * memory and the MAD is incremented every time there's a read + * from 'dummy'. Unfortunately, the current prototype for this + * function doesn't allow for passing the address of this + * device, and changing the prototype will break a number lots + * of other code, so we need to use a round-about way of finding + * the value for 'dummy'. + * + * The value can be extracted from the base address bits of the + * Base Register (BR) associated with the specific UPM. To find + * that BR, we need to scan all 8 BRs until we find the one that + * has its MSEL bits matching the UPM we want. Once we know the + * right BR, we can extract the base address bits from it. + * + * The MxMR and the BR and OR of the chosen bank should all be + * configured before calling this function. + * + * Parameters: + * upm: 0=UPMA, 1=UPMB, 2=UPMC + * table: Pointer to an array of values to program + * size: Number of elements in the array. Must be 64 or less. +*/ void upmconfig (uint upm, uint *table, uint size) { - hang(); /* FIXME: upconfig() needed? */ +#if defined(CONFIG_MPC834X) + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbus = &immap->lbus; + volatile uchar *dummy = NULL; + const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ + volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ + uint i; + + /* Scan all the banks to determine the base address of the device */ + for (i = 0; i < 8; i++) { + if ((lbus->bank[i].br & BR_MSEL) == msel) { + dummy = (uchar *) (lbus->bank[i].br & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() could not find matching BR\n", __FUNCTION__); + hang(); + } + + /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ + *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; + + for (i = 0; i < size; i++) { + lbus->mdr = table[i]; + __asm__ __volatile__ ("sync"); + *dummy; /* Write the value to memory and increment MAD */ + __asm__ __volatile__ ("sync"); + } + + /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ + *mxmr &= 0xCFFFFFC0; +#else + printf("Error: %s() not defined for this configuration.\n", __FUNCTION__); + hang(); +#endif } @@ -150,9 +213,21 @@ unsigned long get_tbclk(void) #if defined(CONFIG_WATCHDOG) void watchdog_reset (void) { - hang(); /* FIXME: implement watchdog_reset()? */ +#ifdef CONFIG_MPC834X + int re_enable = disable_interrupts(); + + /* Reset the 83xx watchdog */ + volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + immr->wdt.swsrr = 0x556c; + immr->wdt.swsrr = 0xaa39; + + if (re_enable) + enable_interrupts (); +#else + hang(); +#endif } -#endif /* CONFIG_WATCHDOG */ +#endif #if defined(CONFIG_OF_FLAT_TREE) void diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 6ed0992c07..999fe71964 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -46,6 +46,37 @@ void cpu_init_f (volatile immap_t * im) /* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t)); + /* system performance tweaking */ + +#ifdef CFG_ACR_PIPE_DEP + /* Arbiter pipeline depth */ + im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT); +#endif + +#ifdef CFG_SPCR_TSEC1EP + /* TSEC1 Emergency priority */ + im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT); +#endif + +#ifdef CFG_SPCR_TSEC2EP + /* TSEC2 Emergency priority */ + im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT); +#endif + +#ifdef CFG_SCCR_TSEC1CM + /* TSEC1 clock mode */ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT); +#endif +#ifdef CFG_SCCR_TSEC2CM + /* TSEC2 & I2C1 clock mode */ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT); +#endif + +#ifdef CFG_ACR_RPTCNT + /* Arbiter repeat count */ + im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT)); +#endif + /* RSR - Reset Status Register - clear all status (4.6.1.3) */ gd->reset_status = im->reset.rsr; im->reset.rsr = ~(RSR_RES); diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 8ee4234631..3dfde8ac04 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -133,6 +133,26 @@ long int spd_sdram() /* Read SPD parameters with I2C */ +#ifdef CFG_83XX_DDR_USES_CS0 + ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; + ddr->cs_config[0] = ( 1 << 31 + | (spd.nrow_addr - 12) << 8 + | (spd.ncol_addr - 8) ); + debug("\n"); + debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n",ddr->cs_config[0]); + + if (spd.nrows == 2) { + ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8) + | ((banksize(spd.row_dens) >> 23) - 1) ); + ddr->cs_config[1] = ( 1<<31 + | (spd.nrow_addr-12) << 8 + | (spd.ncol_addr-8) ); + debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds); + debug("cs1_config = 0x%08x\n",ddr->cs_config[1]); + } + +#else CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); #ifdef SPD_DEBUG spd_debug(&spd); @@ -180,6 +200,7 @@ long int spd_sdram() debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds); debug("cs3_config = 0x%08x\n",ddr->cs_config[3]); } +#endif if (spd.mem_type != 0x07) { puts("No DDR module found!\n"); diff --git a/drivers/tsec.c b/drivers/tsec.c index 6815c153d8..2524e4f6d2 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -1110,10 +1110,8 @@ struct phy_info phy_info_dp83865 = { }; struct phy_info *phy_info[] = { -#if 0 - &phy_info_cis8201, -#endif &phy_info_cis8204, + &phy_info_cis8201, &phy_info_M88E1011S, &phy_info_M88E1111S, &phy_info_M88E1145, diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 40624e8291..bc6196cc88 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -82,15 +82,25 @@ typedef struct sysconf83xx { u8 res5[0x04]; u32 spcr; /* System Priority Configuration Register */ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ +#define SPCR_PCIHPE_SHIFT (31-3) #define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ +#define SPCR_PCIPR_SHIFT (31-7) #define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ +#define SPCR_TBEN_SHIFT (31-9) #define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ +#define SPCR_COREPR_SHIFT (31-11) #define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ +#define SPCR_TSEC1DP_SHIFT (31-19) #define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ +#define SPCR_TSEC1BDP_SHIFT (31-21) #define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ +#define SPCR_TSEC1EP_SHIFT (31-23) #define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ +#define SPCR_TSEC2DP_SHIFT (31-27) #define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ +#define SPCR_TSEC2BDP_SHIFT (31-29) #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ +#define SPCR_TSEC2EP_SHIFT (31-31) #define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) @@ -416,11 +426,17 @@ typedef struct ipic83xx { typedef struct arbiter83xx { u32 acr; /* Arbiter Configuration Register */ #define ACR_COREDIS 0x10000000 /* Core disable. */ +#define ACR_COREDIS_SHIFT (31-7) #define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ +#define ACR_PIPE_DEP_SHIFT (31-15) #define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ +#define ACR_PCI_RPTCNT_SHIFT (31-19) #define ACR_RPTCNT 0x00000700 /* Repeat count. */ +#define ACR_RPTCNT_SHIFT (31-23) #define ACR_APARK 0x00000030 /* Address parking. */ +#define ACR_APARK_SHIFT (31-27) #define ACR_PARKM 0x0000000F /* Parking master. */ +#define ACR_PARKM_SHIFT (31-31) #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) u32 atr; /* Arbiter Timers Register */ #define ATR_DTO 0x00FF0000 /* Data time out. */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h new file mode 100644 index 0000000000..aed350fe09 --- /dev/null +++ b/include/configs/MPC8349ITX.h @@ -0,0 +1,753 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + MPC8349E-mITX board configuration file + + Memory map: + + 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) + 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) + 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) + 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) + 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) + 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) + 0xF000_0000-0xF000_FFFF Compact Flash + 0xF001_0000-0xF001_FFFF Local bus expansion slot + 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385 + 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB) + 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) + + I2C address list: + Align. Board + Bus Addr Part No. Description Length Location + ---------------------------------------------------------------- + I2C1 0x50 M24256-BWMN6P Board EEPROM 2 U64 + + I2C2 0x20 PCF8574 I2C Expander 0 U8 + I2C2 0x21 PCF8574 I2C Expander 0 U10 + I2C2 0x38 PCF8574A I2C Expander 0 U8 + I2C2 0x39 PCF8574A I2C Expander 0 U10 + I2C2 0x51 (DDR) DDR EEPROM 1 U1 + I2C2 0x68 DS1339 RTC 1 U68 + + Note that a given board has *either* a pair of 8574s or a pair of 8574As. +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ +#define CONFIG_MPC8349 /* MPC8349 specific */ + +#define CONFIG_PCI + +#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ +#define CONFIG_RTC_DS1337 + +/* I2C */ +#define CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C + +#define CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R + +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 +#define CFG_SPD_BUS_NUM I2C_2 + +#define CFG_I2C_8574_ADDR1 0x20 /* I2C2, PCF8574 */ +#define CFG_I2C_8574_ADDR2 0x21 /* I2C2, PCF8574 */ +#define CFG_I2C_8574A_ADDR1 0x38 /* I2C2, PCF8574A */ +#define CFG_I2C_8574A_ADDR2 0x39 /* I2C2, PCF8574A */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C1, Board EEPROM */ +#define CFG_I2C_RTC_ADDR 0x68 /* I2C2, DS1339 RTC*/ +#define SPD_EEPROM_ADDRESS 0x51 /* I2C2, DDR */ + +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* Don't probe these addresses: */ +#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ + {1, CFG_I2C_8574_ADDR2}, \ + {1, CFG_I2C_8574A_ADDR1}, \ + {1, CFG_I2C_8574A_ADDR2}} +/* Bit definitions for the 8574[A] I2C expander */ +#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ +#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ +#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ +#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ +#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ + +#undef CONFIG_SOFT_I2C + +#endif + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66666666 +#else +#define CONFIG_SYS_CLK_FREQ 33333333 +#endif +#endif + +#define CFG_IMMRBAR 0xE0000000 /* The IMMR is relocated to here */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00003000 /* memtest region */ +#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ + +/* + * DDR Setup + */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#undef CONFIG_DDR_2T_TIMING +#define CFG_83XX_DDR_USES_CS0 + +#ifndef CONFIG_SPD_EEPROM +/* + * Manually set up DDR parameters + */ + #define CFG_DDR_SIZE 256 /* Mb */ + #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + + #define CFG_DDR_TIMING_1 0x26242321 + #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ +#endif + +/* FLASH on the Local Bus */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */ + +/* VSC7385 on the Local Bus */ +#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */ + +#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) +#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \ + OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */ +#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */ + +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */ +#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) +#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \ + OR_GPCM_SCY_9 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#ifdef CONFIG_COMPACT_FLASH + +#define CFG_CF_BASE 0xF0000000 + +#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) +#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) + +#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ +#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ + +#undef CONFIG_IDE_RESET +#undef CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_BASE_ADDR CFG_CF_BASE +#define CFG_ATA_DATA_OFFSET 0x0000 +#define CFG_ATA_REG_OFFSET 0 +#define CFG_ATA_ALT_OFFSET 0x0200 +#define CFG_ATA_STRIDE 2 + +#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ + +#endif + +#define CONFIG_DOS_PARTITION + +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + */ + +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ + +#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V) +#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \ + OR_SDRAM_XAM | \ + ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \ + ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \ + OR_SDRAM_EAD) + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) +#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) +#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) +#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) +#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) +#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) +#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) +#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) + +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ + | CFG_LBC_LSDMR_BSMA1516 \ + | CFG_LBC_LSDMR_RFCR8 \ + | CFG_LBC_LSDMR_PRETOACT6 \ + | CFG_LBC_LSDMR_ACTTORW3 \ + | CFG_LBC_LSDMR_BL8 \ + | CFG_LBC_LSDMR_WRC3 \ + | CFG_LBC_LSDMR_CL3 \ + ) + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + + +#ifdef CONFIG_PCI + +#define CONFIG_MPC83XX_PCI2 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) +#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ +#endif + +#define _IO_BASE 0x00000000 /* points to PCI I/O space */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#ifdef CONFIG_RTL8139 +/* This macro is used by RTL8139 but not defined in PPC architecture */ +#define KSEG1ADDR(x) (x) +#endif + +#ifndef CONFIG_PCI_PNP + #define PCI_ENET0_IOADDR 0x00000000 + #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE + #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#endif + +/* TSEC */ + +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII +#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ + +#define CONFIG_MPC83XX_TSEC1 + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CFG_TSEC2_OFFSET 0x25000 +#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ +#define TSEC2_PHY_ADDR 4 +#define TSEC2_PHYIDX 0 +#endif + +#define CONFIG_ETHPRIME "Freescale TSEC" + +#endif + + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* CONFIG_COMMANDS */ + +#ifdef CONFIG_COMPACT_FLASH +#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) +#else +#define CONFIG_COMMANDS_CF 0 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_COMMANDS_PCI CFG_CMD_PCI +#else +#define CONFIG_COMMANDS_PCI 0 +#endif + +#ifdef CONFIG_HARD_I2C +#define CONFIG_COMMANDS_I2C CFG_CMD_I2C +#else +#define CONFIG_COMMANDS_I2C 0 +#endif + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CONFIG_COMMANDS_CF | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CONFIG_COMMANDS_I2C | \ + CONFIG_COMMANDS_PCI | \ + CFG_CMD_SDRAM | \ + CFG_CMD_DATE | \ + CFG_CMD_CACHE | \ + CFG_CMD_IRQ) +#include + +/* Watchdog */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#ifdef CONFIG_WATCHDOG +#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ +#endif + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef PCI_64BIT +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#endif + +/* System performance */ +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ +#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ +#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C1 clock mode (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ + +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ +#define CFG_SICRL SICRL_LDP_A + +#define CFG_HID0_INIT 0x000000000 + +#define CFG_HID0_FINAL CFG_HID0_INIT + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L 0 +#define CFG_IBAT1U 0 +#define CFG_IBAT2L 0 +#define CFG_IBAT2U 0 +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L 0 +#define CFG_IBAT3U 0 +#define CFG_IBAT4L 0 +#define CFG_IBAT4U 0 +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L 0 +#define CFG_IBAT7U 0 + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 +#endif + +#define CONFIG_IPADDR 10.82.19.159 +#define CONFIG_SERVERIP 10.82.48.106 +#define CONFIG_GATEWAYIP 10.82.19.254 +#define CONFIG_NETMASK 255.255.252.0 + + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs +#define CONFIG_BOOTFILE timur/uImage + +#define CONFIG_UBOOTPATH timur/u-boot.bin +#define CONFIG_UBOOTSTART fe700000 +#define CONFIG_UBOOTEND fe77ffff + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTDELAY 6 +#else +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#endif + +#define CONFIG_BOOTARGS \ + "root=/dev/nfs rw nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=ttyS0,$baudrate $othbootargs" + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ + "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \ + "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "protect off FEF00000 FEF7FFFF; " \ + "erase FEF00000 FEF7FFFF; " \ + "cp.b $loadaddr FEF00000 $filesize; " \ + "protect on FEF00000 FEF7FFFF; " \ + "cmp.b $loadaddr FEF00000 $filesize\0" \ + "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ + "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" + + +#undef MK_STR +#undef XMK_STR + +#endif From 988833324a7fda482c8ac3ca23eb539f8232e404 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 31 Oct 2006 19:14:41 -0600 Subject: [PATCH 20/72] mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" CHANGELOG: * For the 8349E-mITX, fix some size values in pci_init_board(), enable the clock for the 2nd USB board (Linux kernel will hang otherwise), and fix the CONFIG_BOOTARGS macro. Signed-off-by: Timur Tabi --- board/mpc8349itx/pci.c | 19 +++++++------------ include/configs/MPC8349ITX.h | 19 +++++++++++-------- 2 files changed, 18 insertions(+), 20 deletions(-) diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index 247b3a6ecc..acac185d54 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -150,7 +150,7 @@ void pci_init_board(void) pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; /* * Configure PCI Outbound Translation Windows @@ -159,18 +159,17 @@ void pci_init_board(void) /* PCI1 mem space - prefetch */ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = - POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; /* PCI1 IO space */ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; /* PCI1 mmio - non-prefetch mem space */ pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; /* * Configure PCI Inbound Translation Windows @@ -250,21 +249,17 @@ void pci_init_board(void) /* PCI2 mem space - prefetch */ pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[3].pocmr = - POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & - POCMR_CM_MASK); + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; /* PCI2 IO space */ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[4].pocmr = - POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; /* PCI2 mmio - non-prefetch mem space */ pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[5].pocmr = - POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; /* * Configure PCI Inbound Translation Windows diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index aed350fe09..20f3c6d399 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -604,7 +604,7 @@ /* System IO Config */ #define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CFG_SICRL SICRL_LDP_A +#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) #define CFG_HID0_INIT 0x000000000 @@ -701,7 +701,7 @@ #define CONFIG_SERVERIP 10.82.48.106 #define CONFIG_GATEWAYIP 10.82.19.254 #define CONFIG_NETMASK 255.255.252.0 - +#define CONFIG_NETDEV eth0 #define CONFIG_HOSTNAME mpc8349emitx #define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs @@ -722,16 +722,19 @@ #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #endif -#define CONFIG_BOOTARGS \ - "root=/dev/nfs rw nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=ttyS0,$baudrate $othbootargs" - #define XMK_STR(x) #x #define MK_STR(x) XMK_STR(x) +#define CONFIG_BOOTARGS \ + "root=/dev/nfs rw" \ + " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ + " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ + MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ + MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ + " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ From b701652a4992bdcc62fb1a6038a85beef9e55da4 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Tue, 31 Oct 2006 19:25:38 -0600 Subject: [PATCH 21/72] mpc83xx: Add 8360 specifics to 83xx immap Mainly add QE device dependencies, with appropriate 8360 protection. Lindent also run. --- include/asm-ppc/immap_83xx.h | 1959 ++++++++++++++++++++++++---------- 1 file changed, 1396 insertions(+), 563 deletions(-) diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index bc6196cc88..09e08ba0a4 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -45,66 +45,72 @@ * Local Access Window. */ typedef struct law83xx { - u32 bar; /* LBIU local access window base address register */ + u32 bar; /* LBIU local access window base address register */ /* Identifies the 20 most-significant address bits of the base of local * access window n. The specified base address should be aligned to the * window size, as defined by LBLAWARn[SIZE]. */ #define LAWBAR_BAR 0xFFFFF000 #define LAWBAR_RES ~(LAWBAR_BAR) - u32 ar; /* LBIU local access window attribute register */ + u32 ar; /* LBIU local access window attribute register */ } law83xx_t; /* * System configuration registers. */ typedef struct sysconf83xx { - u32 immrbar; /* Internal memory map base address register */ + u32 immrbar; /* Internal memory map base address register */ u8 res0[0x04]; - u32 altcbar; /* Alternate configuration base address register */ + u32 altcbar; /* Alternate configuration base address register */ /* Identifies the12 most significant address bits of an alternate base * address used for boot sequencer configuration accesses. */ #define ALTCBAR_BASE_ADDR 0xFFF00000 -#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ +#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ u8 res1[0x14]; - law83xx_t lblaw[4]; /* LBIU local access window */ + law83xx_t lblaw[4]; /* LBIU local access window */ u8 res2[0x20]; - law83xx_t pcilaw[2]; /* PCI local access window */ + law83xx_t pcilaw[2]; /* PCI local access window */ u8 res3[0x30]; - law83xx_t ddrlaw[2]; /* DDR local access window */ + law83xx_t ddrlaw[2]; /* DDR local access window */ u8 res4[0x50]; - u32 sgprl; /* System General Purpose Register Low */ - u32 sgprh; /* System General Purpose Register High */ - u32 spridr; /* System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ + u32 sgprl; /* System General Purpose Register Low */ + u32 sgprh; /* System General Purpose Register High */ + u32 spridr; /* System Part and Revision ID Register */ +#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ u8 res5[0x04]; - u32 spcr; /* System Priority Configuration Register */ -#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ + u32 spcr; /* System Priority Configuration Register */ +#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ #define SPCR_PCIHPE_SHIFT (31-3) -#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ +#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ #define SPCR_PCIPR_SHIFT (31-7) -#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ +#define SPCR_OPT 0x00800000 /* Optimize */ +#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ #define SPCR_TBEN_SHIFT (31-9) -#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ +#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ #define SPCR_COREPR_SHIFT (31-11) -#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ +#if defined (CONFIG_MPC8349) +#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ #define SPCR_TSEC1DP_SHIFT (31-19) -#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ +#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ #define SPCR_TSEC1BDP_SHIFT (31-21) -#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ +#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ #define SPCR_TSEC1EP_SHIFT (31-23) -#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ +#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ #define SPCR_TSEC2DP_SHIFT (31-27) -#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ +#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ #define SPCR_TSEC2BDP_SHIFT (31-29) -#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ +#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ #define SPCR_TSEC2EP_SHIFT (31-31) #define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) - u32 sicrl; /* System General Purpose Register Low */ +#elif defined (CONFIG_MPC8360) +#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR) +#endif + u32 sicrl; /* System General Purpose Register Low */ +#if defined (CONFIG_MPC8349) #define SICRL_LDP_A 0x80000000 #define SICRL_USB1 0x40000000 #define SICRL_USB0 0x20000000 @@ -126,8 +132,18 @@ typedef struct sysconf83xx { | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \ | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \ | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L ) - u32 sicrh; /* System General Purpose Register High */ +#elif defined (CONFIG_MPC8360) +#define SICRL_LDP_A 0xC0000000 +#define SICRL_LCLK_1 0x10000000 +#define SICRL_LCLK_2 0x08000000 +#define SICRL_SRCID_A 0x03000000 +#define SICRL_IRQ_CKSTP_A 0x00C00000 +#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \ + SICRL_SRCID_A | SICRL_IRQ_CKSTP_A) +#endif + u32 sicrh; /* System General Purpose Register High */ #define SICRH_DDR 0x80000000 +#if defined (CONFIG_MPC8349) #define SICRH_TSEC1_A 0x10000000 #define SICRH_TSEC1_B 0x08000000 #define SICRH_TSEC1_C 0x04000000 @@ -161,6 +177,15 @@ typedef struct sysconf83xx { | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \ | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ | SICRH_TSOBI2) +#elif defined (CONFIG_MPC8360) +#define SICRH_SECONDARY_DDR 0x40000000 +#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */ +#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */ +#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ +#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ +#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ + SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) +#endif u8 res6[0xE4]; } sysconf83xx_t; @@ -169,13 +194,13 @@ typedef struct sysconf83xx { */ typedef struct wdt83xx { u8 res0[4]; - u32 swcrr; /* System watchdog control register */ - u32 swcnr; /* System watchdog count register */ + u32 swcrr; /* System watchdog control register */ + u32 swcnr; /* System watchdog count register */ #define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. #define SWCNR_RES ~(SWCNR_SWCN) u8 res1[2]; - u16 swsrr; /* System watchdog service register */ -#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field.*/ + u16 swsrr; /* System watchdog service register */ +#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */ u8 res2[0xF0]; } wdt83xx_t; @@ -183,26 +208,26 @@ typedef struct wdt83xx { * RTC/PIT Module Registers */ typedef struct rtclk83xx { - u32 cnr; /* control register */ -#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ -#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ -#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ -#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ + u32 cnr; /* control register */ +#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ +#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ +#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ +#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ #define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) - u32 ldr; /* load register */ -#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be - * loaded in a 32-bit RTC counter.*/ - u32 psr; /* prescale register */ -#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits.*/ - u32 ctr; /* Counter value field register */ -#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field.*/ - u32 evr; /* event register */ -#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ -#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ + u32 ldr; /* load register */ +#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be + * loaded in a 32-bit RTC counter.*/ + u32 psr; /* prescale register */ +#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */ + u32 ctr; /* Counter value field register */ +#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */ + u32 evr; /* event register */ +#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ +#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ #define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) -#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit.*/ +#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */ #define PTEVR_RES ~(PTEVR_PIF) - u32 alr; /* alarm register */ + u32 alr; /* alarm register */ u8 res0[0xE8]; } rtclk83xx_t; @@ -211,256 +236,297 @@ typedef struct rtclk83xx { */ typedef struct gtm83xx { - u8 cfr1; /* Timer1/2 Configuration */ -#define CFR1_PCAS 0x80 /* Pair Cascade mode */ -#define CFR1_BCM 0x40 /* Backward compatible mode */ -#define CFR1_STP2 0x20 /* Stop timer */ -#define CFR1_RST2 0x10 /* Reset timer */ -#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ -#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ -#define CFR1_STP1 0x02 /* Stop timer */ -#define CFR1_RST1 0x01 /* Reset timer */ + u8 cfr1; /* Timer1/2 Configuration */ +#define CFR1_PCAS 0x80 /* Pair Cascade mode */ +#define CFR1_BCM 0x40 /* Backward compatible mode */ +#define CFR1_STP2 0x20 /* Stop timer */ +#define CFR1_RST2 0x10 /* Reset timer */ +#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ +#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ +#define CFR1_STP1 0x02 /* Stop timer */ +#define CFR1_RST1 0x01 /* Reset timer */ #define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ CFR1_GM1 | CFR1_STP1 | CFR1_RST1) - u8 res0[3]; - u8 cfr2; /* Timer3/4 Configuration */ -#define CFR2_PCAS 0x80 /* Pair Cascade mode */ -#define CFR2_SCAS 0x40 /* Super Cascade mode */ -#define CFR2_STP4 0x20 /* Stop timer */ -#define CFR2_RST4 0x10 /* Reset timer */ -#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ -#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ -#define CFR2_STP3 0x02 /* Stop timer */ -#define CFR2_RST3 0x01 /* Reset timer */ - u8 res1[10]; - u16 mdr1; /* Timer1 Mode Register */ -#define MDR_SPS 0xff00 /* Secondary Prescaler value */ -#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ -#define MDR_OM 0x0020 /* Output mode */ -#define MDR_ORI 0x0010 /* Output reference interrupt enable */ -#define MDR_FRR 0x0008 /* Free run/restart */ -#define MDR_ICLK 0x0006 /* Input clock source for the timer */ -#define MDR_GE 0x0001 /* Gate enable */ - u16 mdr2; /* Timer2 Mode Register */ - u16 rfr1; /* Timer1 Reference Register */ - u16 rfr2; /* Timer2 Reference Register */ - u16 cpr1; /* Timer1 Capture Register */ - u16 cpr2; /* Timer2 Capture Register */ - u16 cnr1; /* Timer1 Counter Register */ - u16 cnr2; /* Timer2 Counter Register */ - u16 mdr3; /* Timer3 Mode Register */ - u16 mdr4; /* Timer4 Mode Register */ - u16 rfr3; /* Timer3 Reference Register */ - u16 rfr4; /* Timer4 Reference Register */ - u16 cpr3; /* Timer3 Capture Register */ - u16 cpr4; /* Timer4 Capture Register */ - u16 cnr3; /* Timer3 Counter Register */ - u16 cnr4; /* Timer4 Counter Register */ - u16 evr1; /* Timer1 Event Register */ - u16 evr2; /* Timer2 Event Register */ - u16 evr3; /* Timer3 Event Register */ - u16 evr4; /* Timer4 Event Register */ -#define GTEVR_REF 0x0002 /* Output reference event */ -#define GTEVR_CAP 0x0001 /* Counter Capture event */ + u8 res0[3]; + u8 cfr2; /* Timer3/4 Configuration */ +#define CFR2_PCAS 0x80 /* Pair Cascade mode */ +#define CFR2_SCAS 0x40 /* Super Cascade mode */ +#define CFR2_STP4 0x20 /* Stop timer */ +#define CFR2_RST4 0x10 /* Reset timer */ +#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ +#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ +#define CFR2_STP3 0x02 /* Stop timer */ +#define CFR2_RST3 0x01 /* Reset timer */ + u8 res1[10]; + u16 mdr1; /* Timer1 Mode Register */ +#define MDR_SPS 0xff00 /* Secondary Prescaler value */ +#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ +#define MDR_OM 0x0020 /* Output mode */ +#define MDR_ORI 0x0010 /* Output reference interrupt enable */ +#define MDR_FRR 0x0008 /* Free run/restart */ +#define MDR_ICLK 0x0006 /* Input clock source for the timer */ +#define MDR_GE 0x0001 /* Gate enable */ + u16 mdr2; /* Timer2 Mode Register */ + u16 rfr1; /* Timer1 Reference Register */ + u16 rfr2; /* Timer2 Reference Register */ + u16 cpr1; /* Timer1 Capture Register */ + u16 cpr2; /* Timer2 Capture Register */ + u16 cnr1; /* Timer1 Counter Register */ + u16 cnr2; /* Timer2 Counter Register */ + u16 mdr3; /* Timer3 Mode Register */ + u16 mdr4; /* Timer4 Mode Register */ + u16 rfr3; /* Timer3 Reference Register */ + u16 rfr4; /* Timer4 Reference Register */ + u16 cpr3; /* Timer3 Capture Register */ + u16 cpr4; /* Timer4 Capture Register */ + u16 cnr3; /* Timer3 Counter Register */ + u16 cnr4; /* Timer4 Counter Register */ + u16 evr1; /* Timer1 Event Register */ + u16 evr2; /* Timer2 Event Register */ + u16 evr3; /* Timer3 Event Register */ + u16 evr4; /* Timer4 Event Register */ +#define GTEVR_REF 0x0002 /* Output reference event */ +#define GTEVR_CAP 0x0001 /* Counter Capture event */ #define GTEVR_RES ~(EVR_CAP|EVR_REF) - u16 psr1; /* Timer1 Prescaler Register */ - u16 psr2; /* Timer2 Prescaler Register */ - u16 psr3; /* Timer3 Prescaler Register */ - u16 psr4; /* Timer4 Prescaler Register */ -#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ + u16 psr1; /* Timer1 Prescaler Register */ + u16 psr2; /* Timer2 Prescaler Register */ + u16 psr3; /* Timer3 Prescaler Register */ + u16 psr4; /* Timer4 Prescaler Register */ +#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ #define GTPSR_RES ~(GTPSR_PPS) - u8 res[0xC0]; + u8 res[0xC0]; } gtm83xx_t; /* * Integrated Programmable Interrupt Controller */ typedef struct ipic83xx { - u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ -#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ -#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ -#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ -#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ -#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ -#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ + u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ +#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ +#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ +#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ +#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ +#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ +#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ #define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT) - u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ -#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ -#define SICVR_IVEC 0x0000007f /* Interrupt vector */ + u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ +#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ +#define SICVR_IVEC 0x0000007f /* Interrupt vector */ #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) - u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ -#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ -#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ -#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ -#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ -#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ -#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ -#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ -#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ -#define SIIH_UART1 0x00000080 /* UART1 interrupt */ -#define SIIH_UART2 0x00000040 /* UART2 interrupt */ -#define SIIH_SEC 0x00000020 /* SEC interrupt */ -#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ -#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ -#define SIIH_SPI 0x00000001 /* SPI interrupt */ + u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ +#if defined (CONFIG_MPC8349) +#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ +#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ +#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ +#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ +#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ +#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ +#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ +#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ +#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ +#endif +#define SIIH_UART1 0x00000080 /* UART1 interrupt */ +#define SIIH_UART2 0x00000040 /* UART2 interrupt */ +#define SIIH_SEC 0x00000020 /* SEC interrupt */ +#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ +#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIH_SPI 0x00000001 /* SPI interrupt */ #define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \ | SIIH_I2C2 | SIIH_SPI) - u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ -#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ -#define SIIL_PIT 0x40000000 /* PIT interrupt */ -#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ -#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ -#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ -#define SIIL_MU 0x04000000 /* Message Unit interrupt */ -#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ -#define SIIL_DMA 0x01000000 /* DMA interrupt */ -#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ -#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ -#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ -#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ -#define SIIL_DDR 0x00080000 /* DDR interrupt */ -#define SIIL_LBC 0x00040000 /* LBC interrupt */ -#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ -#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ -#define SIIL_PMC 0x00008000 /* PMC interrupt */ -#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ -#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ -#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ -#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ -#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ + SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) +#endif + u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ +#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ +#define SIIL_PIT 0x40000000 /* PIT interrupt */ +#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ +#endif +#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ +#define SIIL_MU 0x04000000 /* Message Unit interrupt */ +#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ +#define SIIL_DMA 0x01000000 /* DMA interrupt */ +#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ +#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ +#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIL_QEP 0x00200000 /* QE ports interrupt */ +#define SIIL_SDDR 0x00100000 /* SDDR interrupt */ +#endif +#define SIIL_DDR 0x00080000 /* DDR interrupt */ +#define SIIL_LBC 0x00040000 /* LBC interrupt */ +#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ +#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ +#define SIIL_PMC 0x00008000 /* PMC interrupt */ +#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ +#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ +#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ +#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ +#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +#if defined (CONFIG_MPC8349) #define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \ | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \ | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \ | SIIL_GTM5 |SIIL_DPTC ) - u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ - u8 res0[8]; - u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ - u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ - u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ - u8 res1[4]; - u32 sepnr; /* System External Interrupt Pending Register (SEI) */ - u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ - u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ -#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ -#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ -#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ -#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ -#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ -#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ -#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ -#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ + |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ + |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ + |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ + |SIIL_GTM5 ) +#endif + u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ + u8 res0[8]; + u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ + u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ + u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ + u8 res1[4]; + u32 sepnr; /* System External Interrupt Pending Register (SEI) */ + u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ + u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ +#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ +#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ +#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ +#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ +#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ +#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ +#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ +#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ #define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7) - u32 semsr; /* System External Interrupt Mask Register (SEI) */ -#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ -#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ -#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ -#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ -#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ -#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ -#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ -#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ -#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ + u32 semsr; /* System External Interrupt Mask Register (SEI) */ +#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ +#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ +#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ +#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ +#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ +#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ +#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ +#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ +#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ #define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \ | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ | SEI_SIRQ0) - u32 secnr; /* System External Interrupt Control Register (SECNR) */ -#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ -#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ -#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ -#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ -#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ -#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ -#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ -#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ -#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ -#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ -#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ -#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ + u32 secnr; /* System External Interrupt Control Register (SECNR) */ +#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ +#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ +#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ +#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ +#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ +#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ +#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ +#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ +#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ +#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ +#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ +#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ #define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \ | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) - u32 sersr; /* System Error Status Register (SERR) */ - u32 sermr; /* System Error Mask Register (SERR) */ -#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ -#define SERR_WDT 0x40000000 /* WDT MCP request */ -#define SERR_SBA 0x20000000 /* SBA MCP request */ -#define SERR_DDR 0x10000000 /* DDR MCP request */ -#define SERR_LBC 0x08000000 /* LBC MCP request */ -#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ -#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ -#define SERR_MU 0x01000000 /* MU MCP request */ -#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ + u32 sersr; /* System Error Status Register (SERR) */ + u32 sermr; /* System Error Mask Register (SERR) */ +#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ +#define SERR_WDT 0x40000000 /* WDT MCP request */ +#define SERR_SBA 0x20000000 /* SBA MCP request */ +#if defined (CONFIG_MPC8349) +#define SERR_DDR 0x10000000 /* DDR MCP request */ +#define SERR_LBC 0x08000000 /* LBC MCP request */ +#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ +#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ +#endif +#if defined (CONFIG_MPC8360) +#define SERR_CIEE 0x10000000 /* CIEE MCP request */ +#define SERR_CMEE 0x08000000 /* CMEEMCP request */ +#define SERR_PCI 0x04000000 /* PCI MCP request */ +#endif +#define SERR_MU 0x01000000 /* MU MCP request */ +#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ +#if defined (CONFIG_MPC8349) #define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ |SERR_RNC ) - u32 sercr; /* System Error Control Register (SERCR) */ -#define SERCR_MCPR 0x00000001 /* MCP Route */ +#elif defined (CONFIG_MPC8360) +#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ + |SERR_CMEE|SERR_PCI|SERR_MU) +#endif + u32 sercr; /* System Error Control Register (SERCR) */ +#define SERCR_MCPR 0x00000001 /* MCP Route */ #define SERCR_RES ~(SERCR_MCPR) - u8 res2[4]; - u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ - u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ - u32 sefcr; /* System External Interrupt Force Register (SEI) */ - u32 serfr; /* System Error Force Register (SERR) */ - u32 scvcr; /* System Critical Interrupt Vector Register */ -#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible - critical interrupt vector. */ -#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ + u8 res2[4]; + u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ + u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ + u32 sefcr; /* System External Interrupt Force Register (SEI) */ + u32 serfr; /* System Error Force Register (SERR) */ + u32 scvcr; /* System Critical Interrupt Vector Register */ +#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ #define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) - u32 smvcr; /* System Management Interrupt Vector Register */ -#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible - critical interrupt vector. */ -#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ + u32 smvcr; /* System Management Interrupt Vector Register */ +#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ #define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) - u8 res3[0x98]; + u8 res3[0x98]; } ipic83xx_t; /* * System Arbiter Registers */ typedef struct arbiter83xx { - u32 acr; /* Arbiter Configuration Register */ -#define ACR_COREDIS 0x10000000 /* Core disable. */ + u32 acr; /* Arbiter Configuration Register */ +#define ACR_COREDIS 0x10000000 /* Core disable. */ #define ACR_COREDIS_SHIFT (31-7) -#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ +#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ #define ACR_PIPE_DEP_SHIFT (31-15) -#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ +#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ #define ACR_PCI_RPTCNT_SHIFT (31-19) -#define ACR_RPTCNT 0x00000700 /* Repeat count. */ +#define ACR_RPTCNT 0x00000700 /* Repeat count. */ #define ACR_RPTCNT_SHIFT (31-23) -#define ACR_APARK 0x00000030 /* Address parking. */ +#define ACR_APARK 0x00000030 /* Address parking. */ #define ACR_APARK_SHIFT (31-27) -#define ACR_PARKM 0x0000000F /* Parking master. */ +#define ACR_PARKM 0x0000000F /* Parking master. */ #define ACR_PARKM_SHIFT (31-31) #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) - u32 atr; /* Arbiter Timers Register */ -#define ATR_DTO 0x00FF0000 /* Data time out. */ -#define ATR_ATO 0x000000FF /* Address time out. */ + u32 atr; /* Arbiter Timers Register */ +#define ATR_DTO 0x00FF0000 /* Data time out. */ +#define ATR_ATO 0x000000FF /* Address time out. */ #define ATR_RES ~(ATR_DTO|ATR_ATO) u8 res[4]; - u32 aer; /* Arbiter Event Register (AE)*/ - u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ - u32 amr; /* Arbiter Mask Register (AE) */ - u32 aeatr; /* Arbiter Event Attributes Register */ -#define AEATR_EVENT 0x07000000 /* Event type. */ -#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ -#define AEATR_TBST 0x00000800 /* Transfer burst. */ -#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ -#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ + u32 aer; /* Arbiter Event Register (AE) */ + u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ + u32 amr; /* Arbiter Mask Register (AE) */ + u32 aeatr; /* Arbiter Event Attributes Register */ +#define AEATR_EVENT 0x07000000 /* Event type. */ +#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ +#define AEATR_TBST 0x00000800 /* Transfer burst. */ +#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ +#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ #define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE) - u32 aeadr; /* Arbiter Event Address Register */ - u32 aerr; /* Arbiter Event Response Register (AE)*/ -#define AE_ETEA 0x00000020 /* Transfer error. */ -#define AE_RES_ 0x00000010 /* Reserved transfer type. */ -#define AE_ECW 0x00000008 /* External control word transfer type. */ -#define AE_AO 0x00000004 /* Address Only transfer type. */ -#define AE_DTO 0x00000002 /* Data time out. */ -#define AE_ATO 0x00000001 /* Address time out. */ + u32 aeadr; /* Arbiter Event Address Register */ + u32 aerr; /* Arbiter Event Response Register (AE) */ +#define AE_ETEA 0x00000020 /* Transfer error. */ +#define AE_RES_ 0x00000010 /* Reserved transfer type. */ +#define AE_ECW 0x00000008 /* External control word transfer type. */ +#define AE_AO 0x00000004 /* Address Only transfer type. */ +#define AE_DTO 0x00000002 /* Data time out. */ +#define AE_ATO 0x00000001 /* Address time out. */ #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) u8 res1[0xDC]; } arbiter83xx_t; @@ -469,184 +535,400 @@ typedef struct arbiter83xx { * Reset Module */ typedef struct reset83xx { - u32 rcwl; /* RCWL Register */ -#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ + u32 rcwl; /* RCWL Register */ +#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ #define RCWL_LBIUCM_SHIFT 31 -#define RCWL_DDRCM 0x40000000 /* DDRCM */ +#define RCWL_DDRCM 0x40000000 /* DDRCM */ #define RCWL_DDRCM_SHIFT 30 -#define RCWL_SVCOD 0x30000000 /* SVCOD */ -#define RCWL_SPMF 0x0f000000 /* SPMF */ +#if defined (CONFIG_MPC8349) +#define RCWL_SVCOD 0x30000000 /* SVCOD */ +#endif +#define RCWL_SPMF 0x0f000000 /* SPMF */ #define RCWL_SPMF_SHIFT 24 -#define RCWL_COREPLL 0x007F0000 /* COREPLL */ +#define RCWL_COREPLL 0x007F0000 /* COREPLL */ #define RCWL_COREPLL_SHIFT 16 -#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ -#define RCWL_CEPDF 0x00000020 /* CEPDF */ -#define RCWL_CEPMF 0x0000001F /* CEPMF */ +#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ +#define RCWL_CEPDF 0x00000020 /* CEPDF */ +#define RCWL_CEPDF_SHIFT 5 +#define RCWL_CEPMF 0x0000001F /* CEPMF */ +#define RCWL_CEPMF_SHIFT 0 +#if defined (CONFIG_MPC8349) #define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) - u32 rcwh; /* RCHL Register */ -#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#elif defined (CONFIG_MPC8360) +#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) +#endif + u32 rcwh; /* RCHL Register */ +#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ #define RCWH_PCIHOST_SHIFT 31 -#define RCWH_PCI64 0x40000000 /* PCI64 */ -#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ -#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ -#define RCWH_COREDIS 0x08000000 /* COREDIS */ -#define RCWH_BMS 0x04000000 /* BMS */ -#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ -#define RCWH_SWEN 0x00800000 /* SWEN */ -#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ -#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ -#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ -#define RCWH_TPR 0x00000100 /* TPR */ -#define RCWH_TLE 0x00000008 /* TLE */ -#define RCWH_LALE 0x00000004 /* LALE */ +#if defined (CONFIG_MPC8349) +#define RCWH_PCI64 0x40000000 /* PCI64 */ +#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ +#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ +#elif defined (CONFIG_MPC8360) +#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ +#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ +#endif +#define RCWH_COREDIS 0x08000000 /* COREDIS */ +#define RCWH_BMS 0x04000000 /* BMS */ +#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ +#define RCWH_SWEN 0x00800000 /* SWEN */ +#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ +#if defined (CONFIG_MPC8349) +#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ +#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ +#define RCWH_TPR 0x00000100 /* TPR */ +#elif defined (CONFIG_MPC8360) +#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ +#endif +#define RCWH_TLE 0x00000008 /* TLE */ +#define RCWH_LALE 0x00000004 /* LALE */ +#if defined (CONFIG_MPC8349) #define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \ | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \ | RCWH_TLE | RCWH_LALE) - u8 res0[8]; - u32 rsr; /* Reset status Register */ -#define RSR_RSTSRC 0xE0000000 /* Reset source */ +#elif defined (CONFIG_MPC8360) +#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \ + |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \ + |RCWH_SDDRIOE |RCWH_TLE) +#endif + u8 res0[8]; + u32 rsr; /* Reset status Register */ +#define RSR_RSTSRC 0xE0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 29 -#define RSR_BSF 0x00010000 /* Boot seq. fail */ +#define RSR_BSF 0x00010000 /* Boot seq. fail */ #define RSR_BSF_SHIFT 16 -#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWSR 0x00002000 /* software soft reset */ #define RSR_SWSR_SHIFT 13 -#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_SWHR 0x00001000 /* software hard reset */ #define RSR_SWHR_SHIFT 12 -#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JHRS 0x00000200 /* jtag hreset */ #define RSR_JHRS_SHIFT 9 -#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_JSRS 0x00000100 /* jtag sreset status */ #define RSR_JSRS_SHIFT 8 -#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_CSHR 0x00000010 /* checkstop reset status */ #define RSR_CSHR_SHIFT 4 -#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ #define RSR_SWRS_SHIFT 3 -#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ #define RSR_BMRS_SHIFT 2 -#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_SRS 0x00000002 /* soft reset status */ #define RSR_SRS_SHIFT 1 -#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_HRS 0x00000001 /* hard reset status */ #define RSR_HRS_SHIFT 0 #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) - u32 rmr; /* Reset mode Register */ -#define RMR_CSRE 0x00000001 /* checkstop reset enable */ + u32 rmr; /* Reset mode Register */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ #define RMR_CSRE_SHIFT 0 #define RMR_RES ~(RMR_CSRE) - u32 rpr; /* Reset protection Register */ - u32 rcr; /* Reset Control Register */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ + u32 rpr; /* Reset protection Register */ + u32 rcr; /* Reset Control Register */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ #define RCR_RES ~(RCR_SWHR | RCR_SWSR) - u32 rcer; /* Reset Control Enable Register */ -#define RCER_CRE 0x00000001 /* software hard reset */ + u32 rcer; /* Reset Control Enable Register */ +#define RCER_CRE 0x00000001 /* software hard reset */ #define RCER_RES ~(RCER_CRE) - u8 res1[0xDC]; + u8 res1[0xDC]; } reset83xx_t; typedef struct clk83xx { - u32 spmr; /* system PLL mode Register */ -#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ -#define SPMR_DDRCM 0x40000000 /* DDRCM */ -#define SPMR_SVCOD 0x30000000 /* SVCOD */ -#define SPMR_SPMF 0x0F000000 /* SPMF */ -#define SPMR_CKID 0x00800000 /* CKID */ + u32 spmr; /* system PLL mode Register */ +#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ +#define SPMR_DDRCM 0x40000000 /* DDRCM */ +#if defined (CONFIG_MPC8349) +#define SPMR_SVCOD 0x30000000 /* SVCOD */ +#endif +#define SPMR_SPMF 0x0F000000 /* SPMF */ +#define SPMR_CKID 0x00800000 /* CKID */ #define SPMR_CKID_SHIFT 23 -#define SPMR_COREPLL 0x007F0000 /* COREPLL */ -#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ -#define SPMR_CEPDF 0x00000020 /* CEPDF */ -#define SPMR_CEPMF 0x0000001F /* CEPMF */ +#define SPMR_COREPLL 0x007F0000 /* COREPLL */ +#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ +#define SPMR_CEPDF 0x00000020 /* CEPDF */ +#define SPMR_CEPMF 0x0000001F /* CEPMF */ +#if defined (CONFIG_MPC8349) #define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF) - u32 occr; /* output clock control Register */ -#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ -#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ -#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ -#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ -#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ -#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ -#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ -#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ -#define OCCR_PCICD0 0x00800000 /* PCICD0 */ -#define OCCR_PCICD1 0x00400000 /* PCICD1 */ -#define OCCR_PCICD2 0x00200000 /* PCICD2 */ -#define OCCR_PCICD3 0x00100000 /* PCICD3 */ -#define OCCR_PCICD4 0x00080000 /* PCICD4 */ -#define OCCR_PCICD5 0x00040000 /* PCICD5 */ -#define OCCR_PCICD6 0x00020000 /* PCICD6 */ -#define OCCR_PCICD7 0x00010000 /* PCICD7 */ -#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ -#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ +#elif defined (CONFIG_MPC8360) +#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \ + | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \ + | SPMR_CEPDF | SPMR_CEPMF) +#endif + u32 occr; /* output clock control Register */ +#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ +#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ +#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ +#if defined (CONFIG_MPC8349) +#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ +#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ +#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ +#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ +#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ +#endif +#define OCCR_PCICD0 0x00800000 /* PCICD0 */ +#define OCCR_PCICD1 0x00400000 /* PCICD1 */ +#define OCCR_PCICD2 0x00200000 /* PCICD2 */ +#if defined (CONFIG_MPC8349) +#define OCCR_PCICD3 0x00100000 /* PCICD3 */ +#define OCCR_PCICD4 0x00080000 /* PCICD4 */ +#define OCCR_PCICD5 0x00040000 /* PCICD5 */ +#define OCCR_PCICD6 0x00020000 /* PCICD6 */ +#define OCCR_PCICD7 0x00010000 /* PCICD7 */ +#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ +#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ #define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \ | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \ | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \ | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \ | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \ | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR ) - u32 sccr; /* system clock control Register */ -#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ +#endif +#if defined (CONFIG_MPC8360) +#define OCCR_PCICR 0x00000002 /* PCI clock rate */ +#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \ + |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR ) +#endif + u32 sccr; /* system clock control Register */ +#if defined (CONFIG_MPC8349) +#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ #define SCCR_TSEC1CM_SHIFT 30 -#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ +#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ #define SCCR_TSEC2CM_SHIFT 28 -#define SCCR_ENCCM 0x03000000 /* ENCCM */ +#endif +#define SCCR_ENCCM 0x03000000 /* ENCCM */ #define SCCR_ENCCM_SHIFT 24 -#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ +#if defined (CONFIG_MPC8349) +#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ #define SCCR_USBMPHCM_SHIFT 22 -#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ +#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ #define SCCR_USBDRCM_SHIFT 20 -#define SCCR_PCICM 0x00010000 /* PCICM */ +#endif +#define SCCR_PCICM 0x00010000 /* PCICM */ +#if defined (CONFIG_MPC8349) #define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) - u8 res0[0xF4]; +#endif +#if defined (CONFIG_MPC8360) +#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM) +#endif + u8 res0[0xF4]; } clk83xx_t; /* * Power Management Control Module */ typedef struct pmc83xx { - u32 pmccr; /* PMC Configuration Register */ -#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ -#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ + u32 pmccr; /* PMC Configuration Register */ +#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ +#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ +#if defined (CONFIG_MPC8360) +#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ +#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) +#elif defined (CONFIG_MPC8349) #define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) - u32 pmcer; /* PMC Event Register */ -#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ +#endif + u32 pmcer; /* PMC Event Register */ +#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ #define PMCER_RES ~(PMCER_PMCI) - u32 pmcmr; /* PMC Mask Register */ -#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ + u32 pmcmr; /* PMC Mask Register */ +#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ #define PMCMR_RES ~(PMCMR_PMCIE) u8 res0[0xF4]; } pmc83xx_t; +#if defined (CONFIG_MPC8349) /* * general purpose I/O module */ typedef struct gpio83xx { - u32 dir; /* direction register */ - u32 odr; /* open drain register */ - u32 dat; /* data register */ - u32 ier; /* interrupt event register */ - u32 imr; /* interrupt mask register */ - u32 icr; /* external interrupt control register */ + u32 dir; /* direction register */ + u32 odr; /* open drain register */ + u32 dat; /* data register */ + u32 ier; /* interrupt event register */ + u32 imr; /* interrupt mask register */ + u32 icr; /* external interrupt control register */ u8 res0[0xE8]; } gpio83xx_t; +#endif + +#if defined (CONFIG_MPC8360) +/* + * QE Ports Interrupts Registers + */ +typedef struct qepi83xx { + u8 res0[0xC]; + u32 qepier; /* QE Ports Interrupt Event Register */ +#define QEPIER_PA15 0x80000000 +#define QEPIER_PA16 0x40000000 +#define QEPIER_PA29 0x20000000 +#define QEPIER_PA30 0x10000000 +#define QEPIER_PB3 0x08000000 +#define QEPIER_PB5 0x04000000 +#define QEPIER_PB12 0x02000000 +#define QEPIER_PB13 0x01000000 +#define QEPIER_PB26 0x00800000 +#define QEPIER_PB27 0x00400000 +#define QEPIER_PC27 0x00200000 +#define QEPIER_PC28 0x00100000 +#define QEPIER_PC29 0x00080000 +#define QEPIER_PD12 0x00040000 +#define QEPIER_PD13 0x00020000 +#define QEPIER_PD16 0x00010000 +#define QEPIER_PD17 0x00008000 +#define QEPIER_PD26 0x00004000 +#define QEPIER_PD27 0x00002000 +#define QEPIER_PE12 0x00001000 +#define QEPIER_PE13 0x00000800 +#define QEPIER_PE24 0x00000400 +#define QEPIER_PE25 0x00000200 +#define QEPIER_PE26 0x00000100 +#define QEPIER_PE27 0x00000080 +#define QEPIER_PE31 0x00000040 +#define QEPIER_PF20 0x00000020 +#define QEPIER_PG31 0x00000010 +#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \ + |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \ + |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \ + |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \ + |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \ + |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31) + u32 qepimr; /* QE Ports Interrupt Mask Register */ +#define QEPIMR_PA15 0x80000000 +#define QEPIMR_PA16 0x40000000 +#define QEPIMR_PA29 0x20000000 +#define QEPIMR_PA30 0x10000000 +#define QEPIMR_PB3 0x08000000 +#define QEPIMR_PB5 0x04000000 +#define QEPIMR_PB12 0x02000000 +#define QEPIMR_PB13 0x01000000 +#define QEPIMR_PB26 0x00800000 +#define QEPIMR_PB27 0x00400000 +#define QEPIMR_PC27 0x00200000 +#define QEPIMR_PC28 0x00100000 +#define QEPIMR_PC29 0x00080000 +#define QEPIMR_PD12 0x00040000 +#define QEPIMR_PD13 0x00020000 +#define QEPIMR_PD16 0x00010000 +#define QEPIMR_PD17 0x00008000 +#define QEPIMR_PD26 0x00004000 +#define QEPIMR_PD27 0x00002000 +#define QEPIMR_PE12 0x00001000 +#define QEPIMR_PE13 0x00000800 +#define QEPIMR_PE24 0x00000400 +#define QEPIMR_PE25 0x00000200 +#define QEPIMR_PE26 0x00000100 +#define QEPIMR_PE27 0x00000080 +#define QEPIMR_PE31 0x00000040 +#define QEPIMR_PF20 0x00000020 +#define QEPIMR_PG31 0x00000010 +#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \ + |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \ + |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \ + |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \ + |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \ + |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31) + u32 qepicr; /* QE Ports Interrupt Control Register */ +#define QEPICR_PA15 0x80000000 +#define QEPICR_PA16 0x40000000 +#define QEPICR_PA29 0x20000000 +#define QEPICR_PA30 0x10000000 +#define QEPICR_PB3 0x08000000 +#define QEPICR_PB5 0x04000000 +#define QEPICR_PB12 0x02000000 +#define QEPICR_PB13 0x01000000 +#define QEPICR_PB26 0x00800000 +#define QEPICR_PB27 0x00400000 +#define QEPICR_PC27 0x00200000 +#define QEPICR_PC28 0x00100000 +#define QEPICR_PC29 0x00080000 +#define QEPICR_PD12 0x00040000 +#define QEPICR_PD13 0x00020000 +#define QEPICR_PD16 0x00010000 +#define QEPICR_PD17 0x00008000 +#define QEPICR_PD26 0x00004000 +#define QEPICR_PD27 0x00002000 +#define QEPICR_PE12 0x00001000 +#define QEPICR_PE13 0x00000800 +#define QEPICR_PE24 0x00000400 +#define QEPICR_PE25 0x00000200 +#define QEPICR_PE26 0x00000100 +#define QEPICR_PE27 0x00000080 +#define QEPICR_PE31 0x00000040 +#define QEPICR_PF20 0x00000020 +#define QEPICR_PG31 0x00000010 +#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \ + |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \ + |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \ + |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \ + |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \ + |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31) + u8 res1[0xE8]; +} qepi83xx_t; + +/* + * general purpose I/O module + */ +typedef struct gpio_n { + u32 podr; /* Open Drain Register */ + u32 pdat; /* Data Register */ + u32 dir1; /* direction register 1 */ + u32 dir2; /* direction register 2 */ + u32 ppar1; /* Pin Assignment Register 1 */ + u32 ppar2; /* Pin Assignment Register 2 */ +} gpio_n_t; + +typedef struct gpio83xx { + gpio_n_t ioport[0x7]; + u8 res0[0x358]; +} gpio83xx_t; + +/* + * QE Secondary Bus Access Windows + */ + +typedef struct qesba83xx { + u32 lbmcsar; /* Local bus memory controller start address */ +#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +#define LBMCSAR_RES ~(LBMCSAR_SA) + u32 sdmcsar; /* Secondary DDR memory controller start address */ +#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +#define SDMCSAR_RES ~(SDMCSAR_SA) + u8 res0[0x38]; + u32 lbmcear; /* Local bus memory controller end address */ +#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +#define LBMCEAR_RES ~(LBMCEAR_EA) + u32 sdmcear; /* Secondary DDR memory controller end address */ +#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +#define SDMCEAR_RES ~(SDMCEAR_EA) + u8 res1[0x38]; + u32 lbmcar; /* Local bus memory controller attributes */ +#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */ +#define LBMCAR_RES ~(LBMCAR_WEN) + u32 sdmcar; /* Secondary DDR memory controller attributes */ +#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */ +#define SDMCAR_RES ~(SDMCAR_WEN) + u8 res2[0x778]; +} qesba83xx_t; +#endif /* * DDR Memory Controller Memory Map */ -typedef struct ddr_cs_bnds{ +typedef struct ddr_cs_bnds { u32 csbnds; #define CSBNDS_SA 0x00FF0000 #define CSBNDS_SA_SHIFT 8 #define CSBNDS_EA 0x000000FF #define CSBNDS_EA_SHIFT 24 - u8 res0[4]; + u8 res0[4]; } ddr_cs_bnds_t; typedef struct ddr83xx { - ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ + ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ u8 res0[0x60]; - u32 cs_config[4]; /**< Chip Select x Configuration */ + u32 cs_config[4]; /**< Chip Select x Configuration */ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 #define CSCONFIG_ROW_BIT 0x00000700 @@ -659,7 +941,7 @@ typedef struct ddr83xx { #define CSCONFIG_COL_BIT_10 0x00000002 #define CSCONFIG_COL_BIT_11 0x00000003 u8 res1[0x78]; - u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ + u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ #define TIMING_CFG1_PRETOACT 0x70000000 #define TIMING_CFG1_PRETOACT_SHIFT 28 #define TIMING_CFG1_ACTTOPRE 0x0F000000 @@ -676,18 +958,18 @@ typedef struct ddr83xx { #define TIMING_CFG1_ACTTOACT_SHIFT 4 #define TIMING_CFG1_WRTORD 0x00000007 #define TIMING_CFG1_WRTORD_SHIFT 0 -#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ -#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ +#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ +#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ - u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ + u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ #define TIMING_CFG2_CPO 0x0F000000 #define TIMING_CFG2_CPO_SHIFT 24 #define TIMING_CFG2_ACSM 0x00080000 #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 #define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 -#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ - u32 sdram_cfg; /**< SDRAM Control Configuration */ + u32 sdram_cfg; /**< SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 @@ -702,39 +984,39 @@ typedef struct ddr83xx { #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 u8 res2[4]; - u32 sdram_mode; /**< SDRAM Mode Configuration */ + u32 sdram_mode; /**< SDRAM Mode Configuration */ #define SDRAM_MODE_ESD 0xFFFF0000 #define SDRAM_MODE_ESD_SHIFT 16 #define SDRAM_MODE_SD 0x0000FFFF #define SDRAM_MODE_SD_SHIFT 0 -#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ -#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ -#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ -#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ -#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ -#define DDR_MODE_WEAK 0x0002 /* weak drivers */ -#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ -#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ -#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ -#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ -#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ -#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ -#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ -#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ -#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ -#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ -#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ -#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ -#define DDR_MODE_MODEREG 0x0000 /* select mode register */ +#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ +#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +#define DDR_MODE_MODEREG 0x0000 /* select mode register */ u8 res3[8]; - u32 sdram_interval; /**< SDRAM Interval Configuration */ + u32 sdram_interval; /**< SDRAM Interval Configuration */ #define SDRAM_INTERVAL_REFINT 0x3FFF0000 #define SDRAM_INTERVAL_REFINT_SHIFT 16 #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF #define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 - u8 res9[8]; - u32 sdram_clk_cntl; + u8 res9[8]; + u32 sdram_clk_cntl; #define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 @@ -742,39 +1024,39 @@ typedef struct ddr83xx { #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 u8 res4[0xCCC]; - u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ - u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ - u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ + u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ + u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ #define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ #define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ #define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ #define ECC_ERR_INJECT_EEIM_SHIFT 0 u8 res5[0x14]; - u32 capture_data_hi; /**< Memory Data Path Read Capture High */ - u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ - u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ + u32 capture_data_hi; /**< Memory Data Path Read Capture High */ + u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ + u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ #define CAPTURE_ECC_ECE (0xff000000>>24) #define CAPTURE_ECC_ECE_SHIFT 0 u8 res6[0x14]; - u32 err_detect; /**< Memory Error Detect */ -#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ + u32 err_detect; /**< Memory Error Detect */ +#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ #define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ #define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ #define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ - u32 err_disable; /**< Memory Error Disable */ + u32 err_disable; /**< Memory Error Disable */ #define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ #define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ #define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ #define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) - u32 err_int_en; /**< Memory Error Interrupt Enable */ + u32 err_int_en; /**< Memory Error Interrupt Enable */ #define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ #define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ #define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ #define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) - u32 capture_attributes; /**< Memory Error Attributes Capture */ -#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ + u32 capture_attributes; /**< Memory Error Attributes Capture */ +#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ #define ECC_CAPT_ATTR_BNUM_SHIFT 28 -#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ #define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 #define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 #define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 @@ -799,12 +1081,12 @@ typedef struct ddr83xx { #define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 #define ECC_CAPT_ATTR_TTYP_SHIFT 12 #define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ - u32 capture_address; /**< Memory Error Address Capture */ + u32 capture_address; /**< Memory Error Address Capture */ u32 capture_ext_address;/**< Memory Error Extended Address Capture */ - u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ -#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255*/ + u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ +#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ #define ECC_ERROR_MAN_SBET_SHIFT 16 -#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255*/ +#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ #define ECC_ERROR_MAN_SBEC_SHIFT 0 u8 res7[0xA4]; u32 debug_reg; @@ -815,21 +1097,20 @@ typedef struct ddr83xx { * I2C1 Controller */ - /* * DUART */ -typedef struct duart83xx{ +typedef struct duart83xx { u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ - u8 uier_udmb; /**< combined register for UIER and UDMB */ + u8 uier_udmb; /**< combined register for UIER and UDMB */ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ - u8 ulcr; /**< line control register */ - u8 umcr; /**< MODEM control register */ - u8 ulsr; /**< line status register */ - u8 umsr; /**< MODEM status register */ - u8 uscr; /**< scratch register */ + u8 ulcr; /**< line control register */ + u8 umcr; /**< MODEM control register */ + u8 ulsr; /**< line status register */ + u8 umsr; /**< MODEM status register */ + u8 uscr; /**< scratch register */ u8 res0[8]; - u8 udsr; /**< DMA status register */ + u8 udsr; /**< DMA status register */ u8 res1[3]; u8 res2[0xEC]; } duart83xx_t; @@ -837,35 +1118,35 @@ typedef struct duart83xx{ /* * Local Bus Controller Registers */ -typedef struct lbus_bank{ - u32 br; /**< Base Register */ - u32 or; /**< Base Register */ +typedef struct lbus_bank { + u32 br; /**< Base Register */ + u32 or; /**< Base Register */ } lbus_bank_t; typedef struct lbus83xx { lbus_bank_t bank[8]; u8 res0[0x28]; - u32 mar; /**< UPM Address Register */ + u32 mar; /**< UPM Address Register */ u8 res1[0x4]; - u32 mamr; /**< UPMA Mode Register */ - u32 mbmr; /**< UPMB Mode Register */ - u32 mcmr; /**< UPMC Mode Register */ + u32 mamr; /**< UPMA Mode Register */ + u32 mbmr; /**< UPMB Mode Register */ + u32 mcmr; /**< UPMC Mode Register */ u8 res2[0x8]; - u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ - u32 mdr; /**< UPM Data Register */ + u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + u32 mdr; /**< UPM Data Register */ u8 res3[0x8]; - u32 lsdmr; /**< SDRAM Mode Register */ + u32 lsdmr; /**< SDRAM Mode Register */ u8 res4[0x8]; - u32 lurt; /**< UPM Refresh Timer */ - u32 lsrt; /**< SDRAM Refresh Timer */ + u32 lurt; /**< UPM Refresh Timer */ + u32 lsrt; /**< SDRAM Refresh Timer */ u8 res5[0x8]; - u32 ltesr; /**< Transfer Error Status Register */ - u32 ltedr; /**< Transfer Error Disable Register */ - u32 lteir; /**< Transfer Error Interrupt Register */ - u32 lteatr; /**< Transfer Error Attributes Register */ - u32 ltear; /**< Transfer Error Address Register */ + u32 ltesr; /**< Transfer Error Status Register */ + u32 ltedr; /**< Transfer Error Disable Register */ + u32 lteir; /**< Transfer Error Interrupt Register */ + u32 lteatr; /**< Transfer Error Attributes Register */ + u32 ltear; /**< Transfer Error Address Register */ u8 res6[0xC]; - u32 lbcr; /**< Configuration Register */ + u32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 #define LBCR_LDIS_SHIFT 31 #define LBCR_BCTLC 0x00C00000 @@ -876,7 +1157,7 @@ typedef struct lbus83xx { #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 - u32 lcrr; /**< Clock Ratio Register */ + u32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 #define LCRR_DBYP_SHIFT 31 #define LCRR_BUFCMDC 0x30000000 @@ -888,120 +1169,119 @@ typedef struct lbus83xx { #define LCRR_CLKDIV 0x0000000F #define LCRR_CLKDIV_SHIFT 0 - u8 res7[0x28]; u8 res8[0xF00]; } lbus83xx_t; +#if defined (CONFIG_MPC8349) /* * Serial Peripheral Interface */ -typedef struct spi83xx -{ +typedef struct spi83xx { u32 mode; /**< mode register */ u32 event; /**< event register */ u32 mask; /**< mask register */ u32 com; /**< command register */ u8 res0[0x10]; - u32 tx; /**< transmit register */ - u32 rx; /**< receive register */ + u32 tx; /**< transmit register */ + u32 rx; /**< receive register */ u8 res1[0xD8]; } spi83xx_t; - +#endif /* * DMA/Messaging Unit */ typedef struct dma83xx { - u32 res0[0xC]; /* 0x0-0x29 reseverd */ - u32 omisr; /* 0x30 Outbound message interrupt status register */ - u32 omimr; /* 0x34 Outbound message interrupt mask register */ - u32 res1[0x6]; /* 0x38-0x49 reserved */ + u32 res0[0xC]; /* 0x0-0x29 reseverd */ + u32 omisr; /* 0x30 Outbound message interrupt status register */ + u32 omimr; /* 0x34 Outbound message interrupt mask register */ + u32 res1[0x6]; /* 0x38-0x49 reserved */ - u32 imr0; /* 0x50 Inbound message register 0 */ - u32 imr1; /* 0x54 Inbound message register 1 */ - u32 omr0; /* 0x58 Outbound message register 0 */ - u32 omr1; /* 0x5C Outbound message register 1 */ + u32 imr0; /* 0x50 Inbound message register 0 */ + u32 imr1; /* 0x54 Inbound message register 1 */ + u32 omr0; /* 0x58 Outbound message register 0 */ + u32 omr1; /* 0x5C Outbound message register 1 */ - u32 odr; /* 0x60 Outbound doorbell register */ - u32 res2; /* 0x64-0x67 reserved */ - u32 idr; /* 0x68 Inbound doorbell register */ - u32 res3[0x5]; /* 0x6C-0x79 reserved */ + u32 odr; /* 0x60 Outbound doorbell register */ + u32 res2; /* 0x64-0x67 reserved */ + u32 idr; /* 0x68 Inbound doorbell register */ + u32 res3[0x5]; /* 0x6C-0x79 reserved */ - u32 imisr; /* 0x80 Inbound message interrupt status register */ - u32 imimr; /* 0x84 Inbound message interrupt mask register */ - u32 res4[0x1E]; /* 0x88-0x99 reserved */ + u32 imisr; /* 0x80 Inbound message interrupt status register */ + u32 imimr; /* 0x84 Inbound message interrupt mask register */ + u32 res4[0x1E]; /* 0x88-0x99 reserved */ - u32 dmamr0; /* 0x100 DMA 0 mode register */ - u32 dmasr0; /* 0x104 DMA 0 status register */ - u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ - u32 res5; /* 0x10C reserved */ - u32 dmasar0; /* 0x110 DMA 0 source address register */ - u32 res6; /* 0x114 reserved */ - u32 dmadar0; /* 0x118 DMA 0 destination address register */ - u32 res7; /* 0x11C reserved */ - u32 dmabcr0; /* 0x120 DMA 0 byte count register */ - u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ - u32 res8[0x16]; /* 0x128-0x179 reserved */ + u32 dmamr0; /* 0x100 DMA 0 mode register */ + u32 dmasr0; /* 0x104 DMA 0 status register */ + u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ + u32 res5; /* 0x10C reserved */ + u32 dmasar0; /* 0x110 DMA 0 source address register */ + u32 res6; /* 0x114 reserved */ + u32 dmadar0; /* 0x118 DMA 0 destination address register */ + u32 res7; /* 0x11C reserved */ + u32 dmabcr0; /* 0x120 DMA 0 byte count register */ + u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ + u32 res8[0x16]; /* 0x128-0x179 reserved */ - u32 dmamr1; /* 0x180 DMA 1 mode register */ - u32 dmasr1; /* 0x184 DMA 1 status register */ - u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ - u32 res9; /* 0x18C reserved */ - u32 dmasar1; /* 0x190 DMA 1 source address register */ - u32 res10; /* 0x194 reserved */ - u32 dmadar1; /* 0x198 DMA 1 destination address register */ - u32 res11; /* 0x19C reserved */ - u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ - u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ - u32 res12[0x16];/* 0x1A8-0x199 reserved */ + u32 dmamr1; /* 0x180 DMA 1 mode register */ + u32 dmasr1; /* 0x184 DMA 1 status register */ + u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ + u32 res9; /* 0x18C reserved */ + u32 dmasar1; /* 0x190 DMA 1 source address register */ + u32 res10; /* 0x194 reserved */ + u32 dmadar1; /* 0x198 DMA 1 destination address register */ + u32 res11; /* 0x19C reserved */ + u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ + u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ + u32 res12[0x16]; /* 0x1A8-0x199 reserved */ - u32 dmamr2; /* 0x200 DMA 2 mode register */ - u32 dmasr2; /* 0x204 DMA 2 status register */ - u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ - u32 res13; /* 0x20C reserved */ - u32 dmasar2; /* 0x210 DMA 2 source address register */ - u32 res14; /* 0x214 reserved */ - u32 dmadar2; /* 0x218 DMA 2 destination address register */ - u32 res15; /* 0x21C reserved */ - u32 dmabcr2; /* 0x220 DMA 2 byte count register */ - u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ - u32 res16[0x16];/* 0x228-0x279 reserved */ + u32 dmamr2; /* 0x200 DMA 2 mode register */ + u32 dmasr2; /* 0x204 DMA 2 status register */ + u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ + u32 res13; /* 0x20C reserved */ + u32 dmasar2; /* 0x210 DMA 2 source address register */ + u32 res14; /* 0x214 reserved */ + u32 dmadar2; /* 0x218 DMA 2 destination address register */ + u32 res15; /* 0x21C reserved */ + u32 dmabcr2; /* 0x220 DMA 2 byte count register */ + u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ + u32 res16[0x16]; /* 0x228-0x279 reserved */ - u32 dmamr3; /* 0x280 DMA 3 mode register */ - u32 dmasr3; /* 0x284 DMA 3 status register */ - u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ - u32 res17; /* 0x28C reserved */ - u32 dmasar3; /* 0x290 DMA 3 source address register */ - u32 res18; /* 0x294 reserved */ - u32 dmadar3; /* 0x298 DMA 3 destination address register */ - u32 res19; /* 0x29C reserved */ - u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ - u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ + u32 dmamr3; /* 0x280 DMA 3 mode register */ + u32 dmasr3; /* 0x284 DMA 3 status register */ + u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ + u32 res17; /* 0x28C reserved */ + u32 dmasar3; /* 0x290 DMA 3 source address register */ + u32 res18; /* 0x294 reserved */ + u32 dmadar3; /* 0x298 DMA 3 destination address register */ + u32 res19; /* 0x29C reserved */ + u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ + u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ - u32 dmagsr; /* 0x2A8 DMA general status register */ - u32 res20[0x15];/* 0x2AC-0x2FF reserved */ + u32 dmagsr; /* 0x2A8 DMA general status register */ + u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ } dma83xx_t; /* DMAMRn bits */ -#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ -#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ -#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ -#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ +#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ +#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ +#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ +#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ /* DMASRn bits */ -#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ -#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ +#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ /* * PCI Software Configuration Registers */ typedef struct pciconf83xx { - u32 config_address; + u32 config_address; #define PCI_CONFIG_ADDRESS_EN 0x80000000 #define PCI_CONFIG_ADDRESS_BN_SHIFT 16 #define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 @@ -1013,31 +1293,32 @@ typedef struct pciconf83xx { #define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc u32 config_data; u32 int_ack; - u8 res[116]; + u8 res[116]; } pciconf83xx_t; /* * PCI Outbound Translation Register */ typedef struct pci_outbound_window { - u32 potar; - u8 res0[4]; - u32 pobar; - u8 res1[4]; - u32 pocmr; - u8 res2[4]; + u32 potar; + u8 res0[4]; + u32 pobar; + u8 res1[4]; + u32 pocmr; + u8 res2[4]; } pot83xx_t; + /* * Sequencer */ typedef struct ios83xx { - pot83xx_t pot[6]; + pot83xx_t pot[6]; #define POTAR_TA_MASK 0x000fffff #define POBAR_BA_MASK 0x000fffff #define POCMR_EN 0x80000000 #define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ #define POCMR_SE 0x20000000 /* streaming enable */ -#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/ +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ #define POCMR_CM_MASK 0x000fffff #define POCMR_CM_4G 0x00000000 #define POCMR_CM_2G 0x00080000 @@ -1060,18 +1341,18 @@ typedef struct ios83xx { #define POCMR_CM_16K 0x000FFFFC #define POCMR_CM_8K 0x000FFFFE #define POCMR_CM_4K 0x000FFFFF - u8 res0[0x60]; - u32 pmcr; - u8 res1[4]; - u32 dtcr; - u8 res2[4]; + u8 res0[0x60]; + u32 pmcr; + u8 res1[4]; + u32 dtcr; + u8 res2[4]; } ios83xx_t; /* * PCI Controller Control and Status Registers */ typedef struct pcictrl83xx { - u32 esr; + u32 esr; #define ESR_MERR 0x80000000 #define ESR_APAR 0x00000400 #define ESR_PCISERR 0x00000200 @@ -1079,7 +1360,7 @@ typedef struct pcictrl83xx { #define ESR_TPERR 0x00000080 #define ESR_NORSP 0x00000040 #define ESR_TABT 0x00000020 - u32 ecdr; + u32 ecdr; #define ECDR_APAR 0x00000400 #define ECDR_PCISERR 0x00000200 #define ECDR_MPERR 0x00000100 @@ -1093,7 +1374,7 @@ typedef struct pcictrl83xx { #define EER_TPERR 0x00000080 #define EER_NORSP 0x00000040 #define EER_TABT 0x00000020 - u32 eatcr; + u32 eatcr; #define EATCR_ERRTYPR_MASK 0x70000000 #define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ #define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ @@ -1122,37 +1403,46 @@ typedef struct pcictrl83xx { #define EATCR_ES_EM 0x00000000 /* external master */ #define EATCR_ES_DMA 0x00050000 #define EATCR_CMD_MASK 0x0000f000 -#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/ +#if defined (CONFIG_MPC8349) +#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ +#endif #define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ +#if defined (CONFIG_MPC8349) #define EATCR_HPB 0x00000004 /* high parity bit */ -#define EATCR_PB 0x00000002 /* parity bit*/ +#endif +#define EATCR_PB 0x00000002 /* parity bit */ #define EATCR_VI 0x00000001 /* error information valid */ - u32 eacr; - u32 eeacr; - u32 edlcr; - u32 edhcr; - u32 gcr; - u32 ecr; - u32 gsr; - u8 res0[12]; - u32 pitar2; - u8 res1[4]; - u32 pibar2; - u32 piebar2; - u32 piwar2; - u8 res2[4]; - u32 pitar1; - u8 res3[4]; - u32 pibar1; - u32 piebar1; - u32 piwar1; - u8 res4[4]; - u32 pitar0; - u8 res5[4]; - u32 pibar0; - u8 res6[4]; - u32 piwar0; - u8 res7[132]; + u32 eacr; + u32 eeacr; +#if defined (CONFIG_MPC8349) + u32 edlcr; + u32 edhcr; +#elif defined (CONFIG_MPC8360) + u32 edcr; /* was edlcr */ + u8 res_edcr[0x4]; +#endif + u32 gcr; + u32 ecr; + u32 gsr; + u8 res0[12]; + u32 pitar2; + u8 res1[4]; + u32 pibar2; + u32 piebar2; + u32 piwar2; + u8 res2[4]; + u32 pitar1; + u8 res3[4]; + u32 pibar1; + u32 piebar1; + u32 piwar1; + u8 res4[4]; + u32 pitar0; + u8 res5[4]; + u32 pibar0; + u8 res6[4]; + u32 piwar0; + u8 res7[132]; #define PITAR_TA_MASK 0x000fffff #define PIBAR_MASK 0xffffffff #define PIEBAR_EBA_MASK 0x000fffff @@ -1187,6 +1477,7 @@ typedef struct pcictrl83xx { #define PIWAR_IWS_2G 0x0000001E } pcictrl83xx_t; +#if defined (CONFIG_MPC8349) /* * USB */ @@ -1200,6 +1491,7 @@ typedef struct usb83xx { typedef struct tsec83xx { u8 fixme[0x1000]; } tsec83xx_t; +#endif /* * Security @@ -1208,40 +1500,581 @@ typedef struct security83xx { u8 fixme[0x10000]; } security83xx_t; +#if defined (CONFIG_MPC8360) +/* + * iram + */ +typedef struct iram83xx { + u32 iadd; /* I-RAM address register */ + u32 idata; /* I-RAM data register */ + u8 res0[0x78]; +} iram83xx_t; + +/* + * Interrupt Controller + */ +typedef struct irq83xx { + u32 cicr; /* QE system interrupt configuration */ + u32 civec; /* QE system interrupt vector register */ + u32 cripnr; /* QE RISC interrupt pending register */ + u32 cipnr; /* QE system interrupt pending register */ + u32 cipxcc; /* QE interrupt priority register */ + u32 cipycc; /* QE interrupt priority register */ + u32 cipwcc; /* QE interrupt priority register */ + u32 cipzcc; /* QE interrupt priority register */ + u32 cimr; /* QE system interrupt mask register */ + u32 crimr; /* QE RISC interrupt mask register */ + u32 cicnr; /* QE system interrupt control register */ + u8 res0[0x4]; + u32 ciprta; /* QE system interrupt priority register for RISC tasks A */ + u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */ + u8 res1[0x4]; + u32 cricr; /* QE system RISC interrupt control */ + u8 res2[0x20]; + u32 chivec; /* QE high system interrupt vector */ + u8 res3[0x1C]; +} irq83xx_t; + +/* + * Communications Processor + */ +typedef struct cp83xx { + u32 cecr; /* QE command register */ + u32 ceccr; /* QE controller configuration register */ + u32 cecdr; /* QE command data register */ + u8 res0[0xA]; + u16 ceter; /* QE timer event register */ + u8 res1[0x2]; + u16 cetmr; /* QE timers mask register */ + u32 cetscr; /* QE time-stamp timer control register */ + u32 cetsr1; /* QE time-stamp register 1 */ + u32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + u32 cevter; /* QE virtual tasks event register */ + u32 cevtmr; /* QE virtual tasks mask register */ + u16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + u16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + u16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + u16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + u16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + u16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + u16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + u16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + u16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x2]; + u8 res13[0x280]; +} cp83xx_t; + +/* + * QE Multiplexer + */ + +typedef struct qmx83xx { + u32 cmxgcr; /* CMX general clock route register */ + u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + u32 cmxsi1syr; /* CMX SI1 SYNC route register */ + u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ + u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ + u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ + u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + u32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} qmx83xx_t; + +/* +* QE Timers +*/ + +typedef struct qet83xx { + u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */ + u8 res1[0xB]; + u16 gtmdr1; /* Timer 1 mode register */ + u16 gtmdr2; /* Timer 2 mode register */ + u16 gtrfr1; /* Timer 1 reference register */ + u16 gtrfr2; /* Timer 2 reference register */ + u16 gtcpr1; /* Timer 1 capture register */ + u16 gtcpr2; /* Timer 2 capture register */ + u16 gtcnr1; /* Timer 1 counter */ + u16 gtcnr2; /* Timer 2 counter */ + u16 gtmdr3; /* Timer 3 mode register */ + u16 gtmdr4; /* Timer 4 mode register */ + u16 gtrfr3; /* Timer 3 reference register */ + u16 gtrfr4; /* Timer 4 reference register */ + u16 gtcpr3; /* Timer 3 capture register */ + u16 gtcpr4; /* Timer 4 capture register */ + u16 gtcnr3; /* Timer 3 counter */ + u16 gtcnr4; /* Timer 4 counter */ + u16 gtevr1; /* Timer 1 event register */ + u16 gtevr2; /* Timer 2 event register */ + u16 gtevr3; /* Timer 3 event register */ + u16 gtevr4; /* Timer 4 event register */ + u16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} qet83xx_t; + +/* +* spi +*/ + +typedef struct spi83xx { + u8 res0[0x20]; + u32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + u32 spitd; /* SPI transmit data register (cpu mode) */ + u32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} spi83xx_t; + +/* +* mcc +*/ + +typedef struct mcc83xx { + u32 mcce; /* MCC event register */ + u32 mccm; /* MCC mask register */ + u32 mccf; /* MCC configuration register */ + u32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} mcc83xx_t; + +/* +* brg +*/ + +typedef struct brg83xx { + u32 brgc1; /* BRG1 configuration register */ + u32 brgc2; /* BRG2 configuration register */ + u32 brgc3; /* BRG3 configuration register */ + u32 brgc4; /* BRG4 configuration register */ + u32 brgc5; /* BRG5 configuration register */ + u32 brgc6; /* BRG6 configuration register */ + u32 brgc7; /* BRG7 configuration register */ + u32 brgc8; /* BRG8 configuration register */ + u32 brgc9; /* BRG9 configuration register */ + u32 brgc10; /* BRG10 configuration register */ + u32 brgc11; /* BRG11 configuration register */ + u32 brgc12; /* BRG12 configuration register */ + u32 brgc13; /* BRG13 configuration register */ + u32 brgc14; /* BRG14 configuration register */ + u32 brgc15; /* BRG15 configuration register */ + u32 brgc16; /* BRG16 configuration register */ + u8 res0[0x40]; +} brg83xx_t; + +/* +* USB +*/ + +typedef struct usb83xx { + u8 usmod; /* USB mode register */ + u8 usadd; /* USB address register */ + u8 uscom; /* USB command register */ + u8 res0[0x1]; + u16 usep0; /* USB endpoint register 0 */ + u16 usep1; /* USB endpoint register 1 */ + u16 usep2; /* USB endpoint register 2 */ + u16 usep3; /* USB endpoint register 3 */ + u8 res1[0x4]; + u16 usber; /* USB event register */ + u8 res2[0x2]; + u16 usbmr; /* USB mask register */ + u8 res3[0x1]; + u8 usbs; /* USB status register */ + u32 ussft; /* USB start of frame timer */ + u8 res4[0x24]; +} usb83xx_t; + +/* +* SI +*/ + +typedef struct si1_83xx { + u16 siamr1; /* SI1 TDMA mode register */ + u16 sibmr1; /* SI1 TDMB mode register */ + u16 sicmr1; /* SI1 TDMC mode register */ + u16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + u16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + u16 siemr1; /* SI1 TDME mode register 16 bits */ + u16 sifmr1; /* SI1 TDMF mode register 16 bits */ + u16 sigmr1; /* SI1 TDMG mode register 16 bits */ + u16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + u32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} si1_83xx_t; + +/* +* SI Routing Tables +*/ + +typedef struct sir83xx { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} sir83xx_t; + +/* +* ucc +*/ + +typedef struct uslow { + u32 gumr_l; /* UCCx general mode register (low) */ + u32 gumr_h; /* UCCx general mode register (high) */ + u16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + u16 utodr; /* UCCx transmit on demand register */ + u16 udsr; /* UCCx data synchronization register */ + u16 ucce; /* UCCx event register */ + u8 res1[0x2]; + u16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x1E8]; +} uslow_t; + +typedef struct ufast { + u32 gumr; /* UCCx general mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ + u16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + u16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + u32 ucce; /* UCCx event register */ + u32 uccm; /* UCCx mask register. */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + u32 urfb; /* UCC receive FIFO base */ + u16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency threshold */ + u32 utfb; /* UCC transmit FIFO base */ + u16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + u16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + u16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + u16 utpt; /* UCC transmit polling timer */ + u32 urtry; /* UCC retry counter register */ + u8 res7[0x4C]; + u8 guemr; /* UCC general extended mode register */ + u8 res8[0x3]; + u8 res9[0x6C]; + u32 maccfg1; /* Mac configuration register #1 */ + u32 maccfg2; /* Mac configuration register #2 */ + u16 ipgifg; /* Interframe gap register */ + u8 res10[0x2]; + u32 hafdup; /* Half-duplex register */ + u8 res11[0xC]; + u32 emtr; /* Ethernet MAC test register */ + u32 miimcfg; /* MII mgmt configuration register */ + u32 miimcom; /* MII mgmt command register */ + u32 miimadd; /* MII mgmt address register */ + u32 miimcon; /* MII mgmt control register */ + u32 miistat; /* MII mgmt status register */ + u32 miimnd; /* MII mgmt indication register */ + u32 ifctl; /* Interface control register */ + u32 ifstat; /* Interface status register */ + u32 macstnaddr1; /* Station address part 1 register */ + u32 macstnaddr2; /* Station address part 2 register */ + u8 res12[0x8]; + u32 uempr; /* UCC Ethernet MAC parameter register */ + u32 utbipa; /* UCC TBI address */ + u16 uescr; /* UCC Ethernet statistics control register */ + u8 res13[0x26]; + u32 tx64; /* Transmit and receive 64-byte frame counter */ + u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */ + u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */ + u32 rx64; /* Receive and receive 64-byte frame counter */ + u32 rx127; /* Receive and receive 65- to 127-byte frame counter */ + u32 rx255; /* Receive and receive 128- to 255-byte frame counter */ + u32 txok; /* Transmit good bytes counter */ + u32 txcf; /* Transmit control frame counter */ + u32 tmca; /* Transmit multicast control frame counter */ + u32 tbca; /* Transmit broadcast packet counter */ + u32 rxfok; /* Receive frame OK counter */ + u32 rbyt; /* Receive good and bad bytes counter */ + u32 rxbok; /* Receive bytes OK counter */ + u32 rmca; /* Receive multicast packet counter */ + u32 rbca; /* Receive broadcast packet counter */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics carry mask register */ + u8 res14[0x3C]; +} ufast_t; + +typedef struct ucc83xx { + union { + uslow_t slow; + ufast_t fast; + }; +} ucc83xx_t; + +/* +* MultiPHY UTOPIA POS Controllers +*/ + +typedef struct upc83xx { + u32 upgcr; /* UTOPIA/POS general configuration register */ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + u32 uplpa; /* UTOPIA/POS last PHY address */ + u32 uphec; /* ATM HEC register */ + u32 upuc; /* UTOPIA/POS UCC configuration */ + u32 updc1; /* UTOPIA/POS device 1 configuration */ + u32 updc2; /* UTOPIA/POS device 2 configuration */ + u32 updc3; /* UTOPIA/POS device 3 configuration */ + u32 updc4; /* UTOPIA/POS device 4 configuration */ + u32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + u32 upde1; /* UTOPIA/POS device 1 event */ + u32 upde2; /* UTOPIA/POS device 2 event */ + u32 upde3; /* UTOPIA/POS device 3 event */ + u32 upde4; /* UTOPIA/POS device 4 event */ + u16 uprp1; + u16 uprp2; + u16 uprp3; + u16 uprp4; + u8 res1[0x8]; + u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + u32 uper1; /* Device 1 port enable register */ + u32 uper2; /* Device 2 port enable register */ + u32 uper3; /* Device 3 port enable register */ + u32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} upc83xx_t; + +/* +* SDMA +*/ + +typedef struct sdma83xx { + u32 sdsr; /* Serial DMA status register */ + u32 sdmr; /* Serial DMA mode register */ + u32 sdtr1; /* SDMA system bus threshold register */ + u32 sdtr2; /* SDMA secondary bus threshold register */ + u32 sdhy1; /* SDMA system bus hysteresis register */ + u32 sdhy2; /* SDMA secondary bus hysteresis register */ + u32 sdta1; /* SDMA system bus address register */ + u32 sdta2; /* SDMA secondary bus address register */ + u32 sdtm1; /* SDMA system bus MSNUM register */ + u32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + u32 sdaqr; /* SDMA address bus qualify register */ + u32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + u32 sdwbcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} sdma83xx_t; + +/* +* Debug Space +*/ + +typedef struct dbg83xx { + u32 bpdcr; /* Breakpoint debug command register */ + u32 bpdsr; /* Breakpoint debug status register */ + u32 bpdmr; /* Breakpoint debug mask register */ + u32 bprmrr0; /* Breakpoint request mode risc register 0 */ + u32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + u32 bprmtr0; /* Breakpoint request mode trb register 0 */ + u32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + u32 bprmir; /* Breakpoint request mode immediate register */ + u32 bprmsr; /* Breakpoint request mode serial register */ + u32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} dbg83xx_t; + +/* +* RISC Special Registers (Trap and Breakpoint) +*/ + +typedef struct rsp83xx { + u8 fixme[0x100]; +} rsp83xx_t; +#endif + typedef struct immap { - sysconf83xx_t sysconf; /* System configuration */ - wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ - rtclk83xx_t rtc; /* Real Time Clock Module Registers */ - rtclk83xx_t pit; /* Periodic Interval Timer */ - gtm83xx_t gtm[2]; /* Global Timers Module */ - ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter83xx_t arbiter; /* System Arbiter Registers */ - reset83xx_t reset; /* Reset Module */ - clk83xx_t clk; /* System Clock Module */ - pmc83xx_t pmc; /* Power Management Control Module */ - gpio83xx_t pgio[2]; /* general purpose I/O module */ + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ +#if defined (CONFIG_MPC8349) + gpio83xx_t pgio[2]; /* general purpose I/O module */ +#elif defined (CONFIG_MPC8360) + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ +#endif u8 res0[0x200]; +#if defined (CONFIG_MPC8360) + u8 DLL_LBDDR[0x100]; +#endif u8 DDL_DDR[0x100]; u8 DDL_LBIU[0x100]; +#if defined (CONFIG_MPC8349) u8 res1[0xE00]; - ddr83xx_t ddr; /* DDR Memory Controller Memory */ - i2c_t i2c[2]; /* I2C1 Controller */ +#elif defined (CONFIG_MPC8360) + u8 res1[0x200]; + gpio83xx_t gpio; /* General purpose I/O module */ + qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ +#endif + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + i2c_t i2c[2]; /* I2C1 Controller */ u8 res2[0x1300]; - duart83xx_t duart[2];/* DUART */ + duart83xx_t duart[2]; /* DUART */ +#if defined (CONFIG_MPC8349) u8 res3[0x900]; - lbus83xx_t lbus; /* Local Bus Controller Registers */ + lbus83xx_t lbus; /* Local Bus Controller Registers */ u8 res4[0x1000]; - spi83xx_t spi; /* Serial Peripheral Interface */ + spi83xx_t spi; /* Serial Peripheral Interface */ u8 res5[0xF00]; - dma83xx_t dma; /* DMA */ - pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ - ios83xx_t ios; /* Sequencer */ - pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ +#elif defined (CONFIG_MPC8360) + u8 res3[0x900]; + lbus83xx_t lbus; /* Local Bus Controller */ + u8 res4[0x2000]; +#endif + dma83xx_t dma; /* DMA */ +#if defined (CONFIG_MPC8349) + pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ u8 res6[0x19900]; - usb83xx_t usb; - tsec83xx_t tsec[2]; + usb83xx_t usb; + tsec83xx_t tsec[2]; u8 res7[0xA000]; security83xx_t security; +#elif defined (CONFIG_MPC8360) + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res_5[128]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res6[0x4A00]; + ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ + u8 res7[0x22000]; + security83xx_t security; + u8 res8[0xC0000]; + iram83xx_t iram; /* IRAM */ + irq83xx_t irq; /* Interrupt Controller */ + cp83xx_t cp; /* Communications Processor */ + qmx83xx_t qmx; /* QE Multiplexer */ + qet83xx_t qet; /* QE Timers */ + spi83xx_t spi[0x2]; /* spi */ + mcc83xx_t mcc; /* mcc */ + brg83xx_t brg; /* brg */ + usb83xx_t usb; /* USB */ + si1_83xx_t si1; /* SI */ + u8 res9[0x800]; + sir83xx_t sir; /* SI Routing Tables */ + ucc83xx_t ucc1; /* ucc1 */ + ucc83xx_t ucc3; /* ucc3 */ + ucc83xx_t ucc5; /* ucc5 */ + ucc83xx_t ucc7; /* ucc7 */ + u8 res10[0x600]; + upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ + ucc83xx_t ucc2; /* ucc2 */ + ucc83xx_t ucc4; /* ucc4 */ + ucc83xx_t ucc6; /* ucc6 */ + ucc83xx_t ucc8; /* ucc8 */ + u8 res11[0x600]; + upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ + sdma83xx_t sdma; /* SDMA */ + dbg83xx_t dbg; /* Debug Space */ + rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */ + u8 res12[0x300]; + u8 res13[0x3A00]; + u8 res14[0x8000]; /* 0x108000 - 0x110000 */ + u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ + u8 res16[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res17[0xC0000]; /* 0x140000 - 0x200000 */ +#endif } immap_t; -#endif /* __IMMAP_83xx__ */ +#endif /* __IMMAP_83xx__ */ From 23892e49352de74f7fac36ff90bb1be143d195e3 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Tue, 31 Oct 2006 19:30:40 -0600 Subject: [PATCH 22/72] mpc83xx: add the QUICC Engine (QE) immap file common QE immap file. Also required for 8360. --- include/asm-ppc/immap_qe.h | 550 +++++++++++++++++++++++++++++++++++++ 1 file changed, 550 insertions(+) create mode 100644 include/asm-ppc/immap_qe.h diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h new file mode 100644 index 0000000000..f38503206c --- /dev/null +++ b/include/asm-ppc/immap_qe.h @@ -0,0 +1,550 @@ +/* + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * Author: Shlomi Gridih + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __IMMAP_QE_H__ +#define __IMMAP_QE_H__ + +/* QE I-RAM +*/ +typedef struct qe_iram { + u32 iadd; /* I-RAM Address Register */ + u32 idata; /* I-RAM Data Register */ + u8 res0[0x78]; +} __attribute__ ((packed)) qe_iram_t; + +/* QE Interrupt Controller +*/ +typedef struct qe_ic { + u32 qicr; + u32 qivec; + u32 qripnr; + u32 qipnr; + u32 qipxcc; + u32 qipycc; + u32 qipwcc; + u32 qipzcc; + u32 qimr; + u32 qrimr; + u32 qicnr; + u8 res0[0x4]; + u32 qiprta; + u32 qiprtb; + u8 res1[0x4]; + u32 qricr; + u8 res2[0x20]; + u32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)) qe_ic_t; + +/* Communications Processor +*/ +typedef struct cp_qe { + u32 cecr; /* QE command register */ + u32 ceccr; /* QE controller configuration register */ + u32 cecdr; /* QE command data register */ + u8 res0[0xA]; + u16 ceter; /* QE timer event register */ + u8 res1[0x2]; + u16 cetmr; /* QE timers mask register */ + u32 cetscr; /* QE time-stamp timer control register */ + u32 cetsr1; /* QE time-stamp register 1 */ + u32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + u32 cevter; /* QE virtual tasks event register */ + u32 cevtmr; /* QE virtual tasks mask register */ + u16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + u16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + u16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + u16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + u16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + u16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + u16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + u16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + u16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x2]; + u8 res13[0x280]; +} __attribute__ ((packed)) cp_qe_t; + +/* QE Multiplexer +*/ +typedef struct qe_mux { + u32 cmxgcr; /* CMX general clock route register */ + u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + u32 cmxsi1syr; /* CMX SI1 SYNC route register */ + u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ + u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ + u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ + u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + u32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)) qe_mux_t; + +/* QE Timers +*/ +typedef struct qe_timers { + u8 gtcfr1; /* Timer 1 2 global configuration register */ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 4 global configuration register */ + u8 res1[0xB]; + u16 gtmdr1; /* Timer 1 mode register */ + u16 gtmdr2; /* Timer 2 mode register */ + u16 gtrfr1; /* Timer 1 reference register */ + u16 gtrfr2; /* Timer 2 reference register */ + u16 gtcpr1; /* Timer 1 capture register */ + u16 gtcpr2; /* Timer 2 capture register */ + u16 gtcnr1; /* Timer 1 counter */ + u16 gtcnr2; /* Timer 2 counter */ + u16 gtmdr3; /* Timer 3 mode register */ + u16 gtmdr4; /* Timer 4 mode register */ + u16 gtrfr3; /* Timer 3 reference register */ + u16 gtrfr4; /* Timer 4 reference register */ + u16 gtcpr3; /* Timer 3 capture register */ + u16 gtcpr4; /* Timer 4 capture register */ + u16 gtcnr3; /* Timer 3 counter */ + u16 gtcnr4; /* Timer 4 counter */ + u16 gtevr1; /* Timer 1 event register */ + u16 gtevr2; /* Timer 2 event register */ + u16 gtevr3; /* Timer 3 event register */ + u16 gtevr4; /* Timer 4 event register */ + u16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)) qe_timers_t; + +/* BRG +*/ +typedef struct qe_brg { + u32 brgc1; /* BRG1 configuration register */ + u32 brgc2; /* BRG2 configuration register */ + u32 brgc3; /* BRG3 configuration register */ + u32 brgc4; /* BRG4 configuration register */ + u32 brgc5; /* BRG5 configuration register */ + u32 brgc6; /* BRG6 configuration register */ + u32 brgc7; /* BRG7 configuration register */ + u32 brgc8; /* BRG8 configuration register */ + u32 brgc9; /* BRG9 configuration register */ + u32 brgc10; /* BRG10 configuration register */ + u32 brgc11; /* BRG11 configuration register */ + u32 brgc12; /* BRG12 configuration register */ + u32 brgc13; /* BRG13 configuration register */ + u32 brgc14; /* BRG14 configuration register */ + u32 brgc15; /* BRG15 configuration register */ + u32 brgc16; /* BRG16 configuration register */ + u8 res0[0x40]; +} __attribute__ ((packed)) qe_brg_t; + +/* SPI +*/ +typedef struct spi { + u8 res0[0x20]; + u32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + u32 spitd; /* SPI transmit data register (cpu mode) */ + u32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)) spi_t; + +/* SI +*/ +typedef struct si1 { + u16 siamr1; /* SI1 TDMA mode register */ + u16 sibmr1; /* SI1 TDMB mode register */ + u16 sicmr1; /* SI1 TDMC mode register */ + u16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + u16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + u16 siemr1; /* SI1 TDME mode register 16 bits */ + u16 sifmr1; /* SI1 TDMF mode register 16 bits */ + u16 sigmr1; /* SI1 TDMG mode register 16 bits */ + u16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + u32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)) si1_t; + +/* SI Routing Tables +*/ +typedef struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)) sir_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + u16 usb_ussft; + u8 res5[2]; + u16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)) usb_t; + +/* MCC +*/ +typedef struct mcc { + u32 mcce; /* MCC event register */ + u32 mccm; /* MCC mask register */ + u32 mccf; /* MCC configuration register */ + u32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)) mcc_t; + +/* QE UCC Slow +*/ +typedef struct ucc_slow { + u32 gumr_l; /* UCCx general mode register (low) */ + u32 gumr_h; /* UCCx general mode register (high) */ + u16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + u16 utodr; /* UCCx transmit on demand register */ + u16 udsr; /* UCCx data synchronization register */ + u16 ucce; /* UCCx event register */ + u8 res1[0x2]; + u16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + u16 utpt; + u8 guemr; /* UCC general extended mode register */ + u8 res4[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_slow_t; + +typedef struct ucc_ethernet { + u32 maccfg1; /* mac configuration reg. 1 */ + u32 maccfg2; /* mac configuration reg. 2 */ + u32 ipgifg; /* interframe gap reg. */ + u32 hafdup; /* half-duplex reg. */ + u8 res1[0x10]; + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ + u32 macstnaddr1; /* mac station address part 1 reg */ + u32 macstnaddr2; /* mac station address part 2 reg */ + u8 res2[0x8]; + u32 uempr; /* UCC Ethernet Mac parameter reg */ + u32 utbipar; /* UCC tbi address reg */ + u16 uescr; /* UCC Ethernet statistics control reg */ + u8 res3[0x180 - 0x15A]; + u32 tx64; /* Total number of frames (including bad + * frames) transmitted that were exactly + * of the minimal length (64 for un tagged, + * 68 for tagged, or with length exactly + * equal to the parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + * frames) transmitted that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 tx255; /* Total number of frames (including bad + * frames) transmitted that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 rx64; /* Total number of frames received including + * bad frames that were exactly of the + * mninimal length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + * frames) received that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 rx255; /* Total number of frames (including + * bad frames) received that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 txok; /* Total number of octets residing in frames + * that where involved in succesfull + * transmission */ + u16 txcf; /* Total number of PAUSE control frames + * transmitted by this MAC */ + u8 res4[0x2]; + u32 tmca; /* Total number of frames that were transmitted + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + * succesfully that had destination address + * field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + * octets in bad frames. Must be implemented + * in HW because it includes octets in frames + * that never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + * that had destination address equal to the + * broadcast address */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics caryy mask register */ + u8 res5[0x200 - 0x1c4]; +} __attribute__ ((packed)) uec_t; + +/* QE UCC Fast +*/ +typedef struct ucc_fast { + u32 gumr; /* UCCx general mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ + u16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + u16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + u32 ucce; /* UCCx event register */ + u32 uccm; /* UCCx mask register. */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + u32 urfb; /* UCC receive FIFO base */ + u16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency + * threshold */ + u32 utfb; /* UCC transmit FIFO base */ + u16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + u16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + u16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + u16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + u32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ + u8 res9[0x100 - 0x091]; + uec_t ucc_eth; +} __attribute__ ((packed)) ucc_fast_t; + +/* QE UCC +*/ +typedef struct ucc_common { + u8 res1[0x90]; + u8 guemr; + u8 res2[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_common_t; + +typedef struct ucc { + union { + ucc_slow_t slow; + ucc_fast_t fast; + ucc_common_t common; + }; +} __attribute__ ((packed)) ucc_t; + +/* MultiPHY UTOPIA POS Controllers (UPC) +*/ +typedef struct upc { + u32 upgcr; /* UTOPIA/POS general configuration register */ + u32 uplpa; /* UTOPIA/POS last PHY address */ + u32 uphec; /* ATM HEC register */ + u32 upuc; /* UTOPIA/POS UCC configuration */ + u32 updc1; /* UTOPIA/POS device 1 configuration */ + u32 updc2; /* UTOPIA/POS device 2 configuration */ + u32 updc3; /* UTOPIA/POS device 3 configuration */ + u32 updc4; /* UTOPIA/POS device 4 configuration */ + u32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + u32 upde1; /* UTOPIA/POS device 1 event */ + u32 upde2; /* UTOPIA/POS device 2 event */ + u32 upde3; /* UTOPIA/POS device 3 event */ + u32 upde4; /* UTOPIA/POS device 4 event */ + u16 uprp1; + u16 uprp2; + u16 uprp3; + u16 uprp4; + u8 res1[0x8]; + u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + u32 uper1; /* Device 1 port enable register */ + u32 uper2; /* Device 2 port enable register */ + u32 uper3; /* Device 3 port enable register */ + u32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)) upc_t; + +/* SDMA +*/ +typedef struct sdma { + u32 sdsr; /* Serial DMA status register */ + u32 sdmr; /* Serial DMA mode register */ + u32 sdtr1; /* SDMA system bus threshold register */ + u32 sdtr2; /* SDMA secondary bus threshold register */ + u32 sdhy1; /* SDMA system bus hysteresis register */ + u32 sdhy2; /* SDMA secondary bus hysteresis register */ + u32 sdta1; /* SDMA system bus address register */ + u32 sdta2; /* SDMA secondary bus address register */ + u32 sdtm1; /* SDMA system bus MSNUM register */ + u32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + u32 sdaqr; /* SDMA address bus qualify register */ + u32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + u32 sdwbcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)) sdma_t; + +/* Debug Space +*/ +typedef struct dbg { + u32 bpdcr; /* Breakpoint debug command register */ + u32 bpdsr; /* Breakpoint debug status register */ + u32 bpdmr; /* Breakpoint debug mask register */ + u32 bprmrr0; /* Breakpoint request mode risc register 0 */ + u32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + u32 bprmtr0; /* Breakpoint request mode trb register 0 */ + u32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + u32 bprmir; /* Breakpoint request mode immediate register */ + u32 bprmsr; /* Breakpoint request mode serial register */ + u32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)) dbg_t; + +/* RISC Special Registers (Trap and Breakpoint) +*/ +typedef struct rsp { + u8 fixme[0x100]; +} __attribute__ ((packed)) rsp_t; + +typedef struct qe_immap { + qe_iram_t iram; /* I-RAM */ + qe_ic_t ic; /* Interrupt Controller */ + cp_qe_t cp; /* Communications Processor */ + qe_mux_t qmx; /* QE Multiplexer */ + qe_timers_t qet; /* QE Timers */ + spi_t spi[0x2]; /* spi */ + mcc_t mcc; /* mcc */ + qe_brg_t brg; /* brg */ + usb_t usb; /* USB */ + si1_t si1; /* SI */ + u8 res11[0x800]; + sir_t sir; /* SI Routing Tables */ + ucc_t ucc1; /* ucc1 */ + ucc_t ucc3; /* ucc3 */ + ucc_t ucc5; /* ucc5 */ + ucc_t ucc7; /* ucc7 */ + u8 res12[0x600]; + upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ + ucc_t ucc2; /* ucc2 */ + ucc_t ucc4; /* ucc4 */ + ucc_t ucc6; /* ucc6 */ + ucc_t ucc8; /* ucc8 */ + u8 res13[0x600]; + upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ + sdma_t sdma; /* SDMA */ + dbg_t dbg; /* Debug Space */ + rsp_t rsp[0x2]; /* RISC Special Registers + * (Trap and Breakpoint) */ + u8 res14[0x300]; + u8 res15[0x3A00]; + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)) qe_map_t; + +extern qe_map_t *qe_immr; + +#endif /* __IMMAP_QE_H__ */ From 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Fri, 3 Nov 2006 19:33:44 -0600 Subject: [PATCH 23/72] mpc83xx: Add MPC8360EMDS basic board support Add support for the Freescale MPC8360EMDS board. Includes DDR, DUART, Local Bus, PCI. --- MAKEALL | 2 +- Makefile | 27 +- board/mpc8360emds/Makefile | 50 +++ board/mpc8360emds/config.mk | 28 ++ board/mpc8360emds/mpc8360emds.c | 574 +++++++++++++++++++++++++++++++ board/mpc8360emds/pci.c | 294 ++++++++++++++++ board/mpc8360emds/u-boot.lds | 123 +++++++ cpu/mpc83xx/cpu.c | 54 ++- cpu/mpc83xx/spd_sdram.c | 304 +++++++++-------- cpu/mpc83xx/speed.c | 209 ++++++------ include/asm-ppc/e300.h | 2 + include/asm-ppc/global_data.h | 14 +- include/configs/MPC8360EMDS.h | 585 ++++++++++++++++++++++++++++++++ include/mpc83xx.h | 102 +++++- 14 files changed, 2092 insertions(+), 276 deletions(-) create mode 100644 board/mpc8360emds/Makefile create mode 100644 board/mpc8360emds/config.mk create mode 100644 board/mpc8360emds/mpc8360emds.c create mode 100644 board/mpc8360emds/pci.c create mode 100644 board/mpc8360emds/u-boot.lds create mode 100644 include/configs/MPC8360EMDS.h diff --git a/MAKEALL b/MAKEALL index c29dd54f93..6232761d32 100755 --- a/MAKEALL +++ b/MAKEALL @@ -130,7 +130,7 @@ LIST_8260=" \ ######################################################################### LIST_83xx=" \ - TQM834x MPC8349EMDS MPC8349ITX \ + TQM834x MPC8349EMDS MPC8349ITX MPC8360EMDS \ " diff --git a/Makefile b/Makefile index ac7ca4a561..323aafc027 100644 --- a/Makefile +++ b/Makefile @@ -1582,15 +1582,36 @@ r5200_config : unconfig ## MPC83xx Systems ######################################################################### -MPC8349ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads - TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds +MPC8360EMDS_config \ +MPC8360EMDS_HOST_33_config \ +MPC8360EMDS_HOST_66_config \ +MPC8360EMDS_SLAVE_config: unconfig + @echo "" >include/config.h ; \ + if [ "$(findstring _HOST_,$@)" ] ; then \ + echo -n "... PCI HOST " ; \ + echo "#define CONFIG_PCI" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _SLAVE_,$@)" ] ; then \ + echo "...PCI SLAVE 66M" ; \ + echo "#define CONFIG_PCI" >>include/config.h ; \ + echo "#define CONFIG_PCISLAVE" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + echo -n "...33M ..." ; \ + echo "#define PCI_33M" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _66_,$@)" ] ; then \ + echo -n "...66M..." ; \ + echo "#define PCI_66M" >>include/config.h ; \ + fi ; + @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds + MPC8349ITX_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile new file mode 100644 index 0000000000..5ec7a871d4 --- /dev/null +++ b/board/mpc8360emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk new file mode 100644 index 0000000000..9ace8860cf --- /dev/null +++ b/board/mpc8360emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8360EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c new file mode 100644 index 0000000000..d70a4c3cbd --- /dev/null +++ b/board/mpc8360emds/mpc8360emds.c @@ -0,0 +1,574 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on board/mpc8349emds/mpc8349emds.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif + +int board_early_init_f(void) +{ + volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[0xa] &= ~0x04; + + return 0; +} + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif +int fixed_sdram(void); +void sdram_init(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif + im->ddr.csbnds[0].csbnds = 0x00000007; + im->ddr.csbnds[1].csbnds = 0x0008000f; + + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[1] = CFG_DDR_CONFIG; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.sdram_cfg = CFG_DDR_CONTROL; + + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + udelay(200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC8360EMDS\n"); + return 0; +} + +/* + * if MPC8360EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); + print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ + lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + /* + * We need do 8 times auto refresh operation. + */ + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + *sdram_addr = 0xff; /* 1 times */ + udelay(100); + *sdram_addr = 0xff; /* 2 times */ + udelay(100); + *sdram_addr = 0xff; /* 3 times */ + udelay(100); + *sdram_addr = 0xff; /* 4 times */ + udelay(100); + *sdram_addr = 0xff; /* 5 times */ + udelay(100); + *sdram_addr = 0xff; /* 6 times */ + udelay(100); + *sdram_addr = 0xff; /* 7 times */ + udelay(100); + *sdram_addr = 0xff; /* 8 times */ + udelay(100); + + /* Mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *(sdram_addr + 0xcc) = 0xff; + udelay(100); + + /* Normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ + puts("SDRAM on Local Bus is NOT available!\n"); +} +#endif + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) +/* + * ECC user commands + */ +void ecc_print_status(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf("\nECC mode: %s\n\n", + (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); + + /* Interrupts */ + printf("Memory Error Interrupt Enable:\n"); + printf(" Multiple-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); + printf(" Single-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); + printf(" Memory Select Error Interrupt Enable: %d\n\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); + + /* Error disable */ + printf("Memory Error Disable:\n"); + printf(" Multiple-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); + printf(" Sinle-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); + printf(" Memory Select Error Disable: %d\n\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); + + /* Error injection */ + printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", + ddr->data_err_inject_hi, ddr->data_err_inject_lo); + + printf("Memory Data Path Error Injection Mask ECC:\n"); + printf(" ECC Mirror Byte: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); + printf(" ECC Injection Enable: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); + printf(" ECC Error Injection Mask: 0x%02x\n\n", + ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); + + /* SBE counter/threshold */ + printf("Memory Single-Bit Error Management (0..255):\n"); + printf(" Single-Bit Error Threshold: %d\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); + printf(" Single-Bit Error Counter: %d\n\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); + + /* Error detect */ + printf("Memory Error Detect:\n"); + printf(" Multiple Memory Errors: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); + printf(" Multiple-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); + printf(" Single-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); + printf(" Memory Select Error: %d\n\n", + (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); + + /* Capture data */ + printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); + printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", + ddr->capture_data_hi, ddr->capture_data_lo); + printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", + ddr->capture_ecc & CAPTURE_ECC_ECE); + + printf("Memory Error Attributes Capture:\n"); + printf(" Data Beat Number: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> + ECC_CAPT_ATTR_BNUM_SHIFT); + printf(" Transaction Size: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> + ECC_CAPT_ATTR_TSIZ_SHIFT); + printf(" Transaction Source: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> + ECC_CAPT_ATTR_TSRC_SHIFT); + printf(" Transaction Type: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> + ECC_CAPT_ATTR_TTYP_SHIFT); + printf(" Error Information Valid: %d\n\n", + ddr->capture_attributes & ECC_CAPT_ATTR_VLD); +} + +int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile ddr83xx_t *ddr = &immap->ddr; + volatile u32 val; + u64 *addr; + u32 count; + register u64 *i; + u32 ret[2]; + u32 pattern[2]; + u32 writeback[2]; + + /* The pattern is written into memory to generate error */ + pattern[0] = 0xfedcba98UL; + pattern[1] = 0x76543210UL; + + /* After injecting error, re-initialize the memory with the value */ + writeback[0] = 0x01234567UL; + writeback[1] = 0x89abcdefUL; + + if (argc > 4) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc == 2) { + if (strcmp(argv[1], "status") == 0) { + ecc_print_status(); + return 0; + } else if (strcmp(argv[1], "captureclear") == 0) { + ddr->capture_address = 0; + ddr->capture_data_hi = 0; + ddr->capture_data_lo = 0; + ddr->capture_ecc = 0; + ddr->capture_attributes = 0; + return 0; + } + } + if (argc == 3) { + if (strcmp(argv[1], "sbecnt") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, " + "should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBEC_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "sbethr") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, " + "should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBET_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "errdisable") == 0) { + val = ddr->err_disable; + + if (strcmp(argv[2], "+sbe") == 0) { + val |= ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "+mbe") == 0) { + val |= ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "+mse") == 0) { + val |= ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "+all") == 0) { + val |= (ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else if (strcmp(argv[2], "-sbe") == 0) { + val &= ~ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "-mbe") == 0) { + val &= ~ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "-mse") == 0) { + val &= ~ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "-all") == 0) { + val &= ~(ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else { + printf("Incorrect err_disable field\n"); + return 1; + } + + ddr->err_disable = val; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + return 0; + } else if (strcmp(argv[1], "errdetectclr") == 0) { + val = ddr->err_detect; + + if (strcmp(argv[2], "mme") == 0) { + val |= ECC_ERROR_DETECT_MME; + } else if (strcmp(argv[2], "sbe") == 0) { + val |= ECC_ERROR_DETECT_SBE; + } else if (strcmp(argv[2], "mbe") == 0) { + val |= ECC_ERROR_DETECT_MBE; + } else if (strcmp(argv[2], "mse") == 0) { + val |= ECC_ERROR_DETECT_MSE; + } else if (strcmp(argv[2], "all") == 0) { + val |= (ECC_ERROR_DETECT_MME | + ECC_ERROR_DETECT_MBE | + ECC_ERROR_DETECT_SBE | + ECC_ERROR_DETECT_MSE); + } else { + printf("Incorrect err_detect field\n"); + return 1; + } + + ddr->err_detect = val; + return 0; + } else if (strcmp(argv[1], "injectdatahi") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_hi = val; + return 0; + } else if (strcmp(argv[1], "injectdatalo") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_lo = val; + return 0; + } else if (strcmp(argv[1], "injectecc") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + if (val > 0xff) { + printf("Incorrect ECC inject mask, " + "should be 0x00..0xff\n"); + return 1; + } + val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); + + ddr->ecc_err_inject = val; + return 0; + } else if (strcmp(argv[1], "inject") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EIEN; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EIEN; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + return 0; + } else if (strcmp(argv[1], "mirror") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EMB; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EMB; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + return 0; + } + } + if (argc == 4) { + if (strcmp(argv[1], "testdw") == 0) { + addr = (u64 *) simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32) addr % 8) { + printf("Address not alligned on " + "double word boundary\n"); + return 1; + } + disable_interrupts(); + + for (i = addr; i < addr + count; i++) { + + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* write memory location injecting errors */ + ppcDWstore((u32 *) i, pattern); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* read data, this generates ECC error */ + ppcDWload((u32 *) i, ret); + + /* re-initialize memory, double word write the location again, + * generates new ECC code this time */ + ppcDWstore((u32 *) i, writeback); + } + enable_interrupts(); + return 0; + } + if (strcmp(argv[1], "testword") == 0) { + addr = (u64 *) simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32) addr % 8) { + printf("Address not alligned on " + "double word boundary\n"); + return 1; + } + disable_interrupts(); + + for (i = addr; i < addr + count; i++) { + + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* write memory location injecting errors */ + *(u32 *) i = 0xfedcba98UL; + __asm__ __volatile__("sync"); + + /* sub double word write, + * bus will read-modify-write, + * generates ECC error */ + *((u32 *) i + 1) = 0x76543210UL; + __asm__ __volatile__("sync"); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* re-initialize memory, + * double word write the location again, + * generates new ECC code this time */ + ppcDWstore((u32 *) i, writeback); + } + enable_interrupts(); + return 0; + } + } + printf("Usage:\n%s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD(ecc, 4, 0, do_ecc, + "ecc - support for DDR ECC features\n", + "status - print out status info\n" + "ecc captureclear - clear capture regs data\n" + "ecc sbecnt - set Single-Bit Error counter\n" + "ecc sbethr - set Single-Bit Threshold\n" + "ecc errdisable - clear/set disable Memory Error Disable, flag:\n" + " [-|+]sbe - Single-Bit Error\n" + " [-|+]mbe - Multiple-Bit Error\n" + " [-|+]mse - Memory Select Error\n" + " [-|+]all - all errors\n" + "ecc errdetectclr - clear Memory Error Detect, flag:\n" + " mme - Multiple Memory Errors\n" + " sbe - Single-Bit Error\n" + " mbe - Multiple-Bit Error\n" + " mse - Memory Select Error\n" + " all - all errors\n" + "ecc injectdatahi - set Memory Data Path Error Injection Mask High\n" + "ecc injectdatalo - set Memory Data Path Error Injection Mask Low\n" + "ecc injectecc - set ECC Error Injection Mask\n" + "ecc inject - enable/disable error injection\n" + "ecc mirror - enable/disable mirror byte\n" + "ecc testdw - test mem region with double word access:\n" + " - enables injects\n" + " - writes pattern injecting errors with double word access\n" + " - disables injects\n" + " - reads pattern back with double word access, generates error\n" + " - re-inits memory\n" + "ecc testword - test mem region with word access:\n" + " - enables injects\n" + " - writes pattern injecting errors with word access\n" + " - writes pattern with word access, generates error\n" + " - disables injects\n" " - re-inits memory"); +#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c new file mode 100644 index 0000000000..880b2ecc3e --- /dev/null +++ b/board/mpc8360emds/pci.c @@ -0,0 +1,294 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include +#include +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMRBAR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u8 val8, orig_i2c_bus; + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMRBAR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Assign PIB PMC slot to desired PCI bus + */ + + mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); + + val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8360emds/u-boot.lds b/board/mpc8360emds/u-boot.lds new file mode 100644 index 0000000000..937c87a27c --- /dev/null +++ b/board/mpc8360emds/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 4e82a8b789..1de337b33c 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -43,28 +43,70 @@ DECLARE_GLOBAL_DATA_PTR; int checkcpu(void) { + volatile immap_t *immr; ulong clock = gd->cpu_clk; u32 pvr = get_pvr(); + u32 spridr; char buf[32]; + immr = (immap_t *)CFG_IMMRBAR; + if ((pvr & 0xFFFF0000) != PVR_83xx) { puts("Not MPC83xx Family!!!\n"); return -1; } - puts("CPU: MPC83xx, "); - switch(pvr) { - case PVR_8349_REV10: + spridr = immr->sysconf.spridr; + puts("CPU: "); + switch(spridr) { + case SPR_8349E_REV10: + case SPR_8349E_REV11: + puts("MPC8349E, "); break; - case PVR_8349_REV11: + case SPR_8349_REV10: + case SPR_8349_REV11: + puts("MPC8349, "); + break; + case SPR_8347E_REV10_TBGA: + case SPR_8347E_REV11_TBGA: + case SPR_8347E_REV10_PBGA: + case SPR_8347E_REV11_PBGA: + puts("MPC8347E, "); + break; + case SPR_8347_REV10_TBGA: + case SPR_8347_REV11_TBGA: + case SPR_8347_REV10_PBGA: + case SPR_8347_REV11_PBGA: + puts("MPC8347, "); + break; + case SPR_8343E_REV10: + case SPR_8343E_REV11: + puts("MPC8343E, "); + break; + case SPR_8343_REV10: + case SPR_8343_REV11: + puts("MPC8343, "); + break; + case SPR_8360E_REV10: + case SPR_8360E_REV11: + case SPR_8360E_REV12: + puts("MPC8360E, "); + break; + case SPR_8360_REV10: + case SPR_8360_REV11: + case SPR_8360_REV12: + puts("MPC8360, "); break; default: puts("Rev: Unknown\n"); return -1; /* Not sure what this is */ } - printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4, - (pvr & 0x0f), strmhz(buf, clock)); +#if defined(CONFIG_MPC8349) + printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock)); +#else + printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock)); +#endif return 0; } diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 3dfde8ac04..acc8c9e79b 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -4,7 +4,7 @@ * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright 2004 Freescale Semiconductor. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao (X.Xiao@motorola.com) * @@ -112,14 +112,10 @@ static void spd_debug(spd_eeprom_t *spd) long int spd_sdram() { -#ifdef CONFIG_MPC834X - int caslat_83xx; /* For Errata DDR6 */ -#endif volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; volatile ddr83xx_t *ddr = &immap->ddr; volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; spd_eeprom_t spd; - unsigned int tmp, tmp1; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -131,28 +127,7 @@ long int spd_sdram() unsigned sdram_cfg; unsigned int ddrc_ecc_enable; - /* Read SPD parameters with I2C */ -#ifdef CFG_83XX_DDR_USES_CS0 - ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; - ddr->cs_config[0] = ( 1 << 31 - | (spd.nrow_addr - 12) << 8 - | (spd.ncol_addr - 8) ); - debug("\n"); - debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds); - debug("cs0_config = 0x%08x\n",ddr->cs_config[0]); - - if (spd.nrows == 2) { - ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8) - | ((banksize(spd.row_dens) >> 23) - 1) ); - ddr->cs_config[1] = ( 1<<31 - | (spd.nrow_addr-12) << 8 - | (spd.ncol_addr-8) ); - debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds); - debug("cs1_config = 0x%08x\n",ddr->cs_config[1]); - } - -#else CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); #ifdef SPD_DEBUG spd_debug(&spd); @@ -183,6 +158,26 @@ long int spd_sdram() return 0; } /* Setup DDR chip select register */ +#ifdef CFG_83XX_DDR_USES_CS0 + ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; + ddr->cs_config[0] = ( 1 << 31 + | (spd.nrow_addr - 12) << 8 + | (spd.ncol_addr - 8) ); + debug("\n"); + debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n",ddr->cs_config[0]); + + if (spd.nrows == 2) { + ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8) + | ((banksize(spd.row_dens) >> 23) - 1) ); + ddr->cs_config[1] = ( 1<<31 + | (spd.nrow_addr-12) << 8 + | (spd.ncol_addr-8) ); + debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds); + debug("cs1_config = 0x%08x\n",ddr->cs_config[1]); + } + +#else ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1; ddr->cs_config[2] = ( 1 << 31 | (spd.nrow_addr - 12) << 8 @@ -243,8 +238,9 @@ long int spd_sdram() */ caslat = __ilog2(spd.cas_lat); - if (caslat > 4 ) { - printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat); + if (caslat > 6 ) { + printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", + spd.cas_lat); return 0; } max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10 @@ -256,89 +252,110 @@ long int spd_sdram() ddrc_clk = get_ddr_clk(0) / 1000000; if (max_data_rate >= 390) { /* it is DDR 400 */ - printf("DDR: platform not support DDR 400\n"); - return 0; + if (ddrc_clk <= 410 && ddrc_clk > 350) { + /* DDR controller clk at 350~410 */ + effective_data_rate = 400; /* 5ns */ + caslat = caslat; + } else if (ddrc_clk <= 350 && ddrc_clk > 280) { + /* DDR controller clk at 280~350 */ + effective_data_rate = 333; /* 6ns */ + if (spd.clk_cycle2 == 0x60) { + caslat = caslat - 1; + } else { + caslat = caslat; + } + } else if (ddrc_clk <= 280 && ddrc_clk > 230) { + /* DDR controller clk at 230~280 */ + effective_data_rate = 266; /* 7.5ns */ + if (spd.clk_cycle3 == 0x75) { + caslat = caslat - 2; + } else if (spd.clk_cycle2 == 0x60) { + caslat = caslat - 1; + } else { + caslat = caslat; + } + } else if (ddrc_clk <= 230 && ddrc_clk > 90) { + /* DDR controller clk at 90~230 */ + effective_data_rate = 200; /* 10ns */ + if (spd.clk_cycle3 == 0x75) { + caslat = caslat - 2; + } else if (spd.clk_cycle2 == 0x60) { + caslat = caslat - 1; + } else { + caslat = caslat; + } + } } else if (max_data_rate >= 323) { /* it is DDR 333 */ if (ddrc_clk <= 350 && ddrc_clk > 280) { - /* DDRC clk at 280~350 */ + /* DDR controller clk at 280~350 */ effective_data_rate = 333; /* 6ns */ caslat = caslat; } else if (ddrc_clk <= 280 && ddrc_clk > 230) { - /* DDRC clk at 230~280 */ + /* DDR controller clk at 230~280 */ + effective_data_rate = 266; /* 7.5ns */ if (spd.clk_cycle2 == 0x75) { - effective_data_rate = 266; /* 7.5ns */ caslat = caslat - 1; + } else { + caslat = caslat; } } else if (ddrc_clk <= 230 && ddrc_clk > 90) { - /* DDRC clk at 90~230 */ + /* DDR controller clk at 90~230 */ + effective_data_rate = 200; /* 10ns */ if (spd.clk_cycle3 == 0xa0) { - effective_data_rate = 200; /* 10ns */ caslat = caslat - 2; + } else if (spd.clk_cycle2 == 0x75) { + caslat = caslat - 1; + } else { + caslat = caslat; } } } else if (max_data_rate >= 256) { /* it is DDR 266 */ if (ddrc_clk <= 350 && ddrc_clk > 280) { - /* DDRC clk at 280~350 */ + /* DDR controller clk at 280~350 */ printf("DDR: DDR controller freq is more than " "max data rate of the module\n"); return 0; } else if (ddrc_clk <= 280 && ddrc_clk > 230) { - /* DDRC clk at 230~280 */ + /* DDR controller clk at 230~280 */ effective_data_rate = 266; /* 7.5ns */ caslat = caslat; } else if (ddrc_clk <= 230 && ddrc_clk > 90) { - /* DDRC clk at 90~230 */ + /* DDR controller clk at 90~230 */ + effective_data_rate = 200; /* 10ns */ if (spd.clk_cycle2 == 0xa0) { - effective_data_rate = 200; /* 10ns */ caslat = caslat - 1; } } } else if (max_data_rate >= 190) { /* it is DDR 200 */ if (ddrc_clk <= 350 && ddrc_clk > 230) { - /* DDRC clk at 230~350 */ + /* DDR controller clk at 230~350 */ printf("DDR: DDR controller freq is more than " "max data rate of the module\n"); return 0; } else if (ddrc_clk <= 230 && ddrc_clk > 90) { - /* DDRC clk at 90~230 */ + /* DDR controller clk at 90~230 */ effective_data_rate = 200; /* 10ns */ caslat = caslat; } } -#ifdef CONFIG_MPC834X -/* Errata DDR6 - This errata affects all MPC8349E, MPC8343E and MPC8347E processors. -*/ - if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */ - { - if (spd.mid[0] == 0x2c) { - /* Micron memory running at 333 MHz */ - /* Chances are, U-Boot will crash before we get here, - but just in case, display a message and return error. */ - printf("Micron DDR not supported at 333MHz CSB\n"); - return 0; - } else if (spd.mid[0] == 0xad) { - printf("Hynix DDR does not require Errata DDR6\n"); - } else { - /* enable 2 cycle Earlier for CL=2.5 or 3 */ - ddr->debug_reg = 0x202c0000; - printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg); - } - caslat_83xx = caslat; - } - - if ((tmp1 >= 230) && (tmp1 < 280)) { /* CSB=266 */ - if (spd.mid[0] != 0x2c) /* non-Micron */ - caslat_83xx = caslat - 1; + debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate); + debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat); + /* + * Errata DDR6 work around: input enable 2 cycles earlier. + * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2. + */ + if (caslat == 2) { + ddr->debug_reg = 0x201c0000; /* CL=2 */ + } else if (caslat == 3) { + ddr->debug_reg = 0x202c0000; /* CL=2.5 */ + } else if (caslat == 4) { + ddr->debug_reg = 0x202c0000; /* CL=3.0 */ } + __asm__ __volatile__ ("sync"); - if ((tmp1 >= 90) && (tmp1 < 230)) { /* CSB=200 */ - caslat = 3; - caslat_83xx = 2; - } -#endif + debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg); /* * note: caslat must also be programmed into ddr->sdram_mode @@ -353,11 +370,7 @@ long int spd_sdram() (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) | -#ifdef CONFIG_MPC834x - ((caslat_83xx & 0x07) << 16 ) | -#else ((caslat_ctrl & 0x07) << 16 ) | -#endif (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) | ( 0x300 ) | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1); @@ -370,13 +383,10 @@ long int spd_sdram() ddr->sdram_cfg = 0x42000000; /* Check DIMM data bus width */ - if (spd.dataw_lsb == 0x20) - { + if (spd.dataw_lsb == 0x20) { burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ printf("\n DDR DIMM: data bus width is 32 bit"); - } - else - { + } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ printf("\n DDR DIMM: data bus width is 64 bit"); } @@ -384,68 +394,67 @@ long int spd_sdram() /* Is this an ECC DDR chip? */ if (spd.config == 0x02) { printf(" with ECC\n"); - } - else + } else { printf(" without ECC\n"); + } /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential */ - switch(caslat) { - case 1: - ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */ - break; - case 2: - ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */ - break; - case 3: - ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */ - break; - case 4: - ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */ - break; - default: - printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 " - "is supported.\n"); - return 0; + switch (caslat) { + case 1: + ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */ + break; + case 2: + ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */ + break; + case 3: + ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */ + break; + case 4: + ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */ + break; + default: + printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n"); + return 0; } debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode); - switch(spd.refresh) { - case 0x00: - case 0x80: - tmp = picos_to_clk(15625000); - break; - case 0x01: - case 0x81: - tmp = picos_to_clk(3900000); - break; - case 0x02: - case 0x82: - tmp = picos_to_clk(7800000); - break; - case 0x03: - case 0x83: - tmp = picos_to_clk(31300000); - break; - case 0x04: - case 0x84: - tmp = picos_to_clk(62500000); - break; - case 0x05: - case 0x85: - tmp = picos_to_clk(125000000); - break; - default: - tmp = 0x512; - break; + switch (spd.refresh) { + case 0x00: + case 0x80: + refresh_clk = picos_to_clk(15625000); + break; + case 0x01: + case 0x81: + refresh_clk = picos_to_clk(3900000); + break; + case 0x02: + case 0x82: + refresh_clk = picos_to_clk(7800000); + break; + case 0x03: + case 0x83: + refresh_clk = picos_to_clk(31300000); + break; + case 0x04: + case 0x84: + refresh_clk = picos_to_clk(62500000); + break; + case 0x05: + case 0x85: + refresh_clk = picos_to_clk(125000000); + break; + default: + refresh_clk = 0x512; + break; } /* * Set BSTOPRE to 0x100 for page mode * If auto-charge is used, set BSTOPRE = 0 */ - ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100; + ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100; debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval); /* SS_EN = 0, source synchronous disable @@ -459,8 +468,8 @@ long int spd_sdram() udelay(600); /* - * Figure out the settings for the sdram_cfg register. Build up - * the entire register in 'tmp' before writing since the write into + * Figure out the settings for the sdram_cfg register. Build up + * the value in 'sdram_cfg' before writing since the write into * the register will actually enable the memory controller, and all * settings must be done before enabling. * @@ -493,13 +502,13 @@ long int spd_sdram() /* set single bit error threshold to maximum value, * reset counter to zero */ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | - (0 << ECC_ERROR_MAN_SBEC_SHIFT); + (0 << ECC_ERROR_MAN_SBEC_SHIFT); } debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif - printf(" DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF"); + printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* @@ -517,7 +526,6 @@ long int spd_sdram() } #endif /* CONFIG_SPD_EEPROM */ - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) /* * Use timebase counter, get_timer() is not availabe @@ -602,26 +610,16 @@ void ddr_enable_ecc(unsigned int dram_size) } } - /* 8K */ - dma_xfer((uint *)0x2000, 0x2000, (uint *)0); - /* 16K */ - dma_xfer((uint *)0x4000, 0x4000, (uint *)0); - /* 32K */ - dma_xfer((uint *)0x8000, 0x8000, (uint *)0); - /* 64K */ - dma_xfer((uint *)0x10000, 0x10000, (uint *)0); - /* 128k */ - dma_xfer((uint *)0x20000, 0x20000, (uint *)0); - /* 256k */ - dma_xfer((uint *)0x40000, 0x40000, (uint *)0); - /* 512k */ - dma_xfer((uint *)0x80000, 0x80000, (uint *)0); - /* 1M */ - dma_xfer((uint *)0x100000, 0x100000, (uint *)0); - /* 2M */ - dma_xfer((uint *)0x200000, 0x200000, (uint *)0); - /* 4M */ - dma_xfer((uint *)0x400000, 0x400000, (uint *)0); + dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */ + dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */ + dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */ + dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */ + dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */ + dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */ + dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */ + dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ + dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ + dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ for (i = 1; i < dram_size / 0x800000; i++) { dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 412713f322..31fcadd1ea 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -104,79 +104,52 @@ int get_clocks (void) u32 lcrr; u32 csb_clk; +#if defined(CONFIG_MPC8349) u32 tsec1_clk; u32 tsec2_clk; - u32 core_clk; u32 usbmph_clk; u32 usbdr_clk; - u32 i2c_clk; +#endif + u32 core_clk; + u32 i2c1_clk; + u32 i2c2_clk; u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; u32 ddr_clk; +#if defined (CONFIG_MPC8360) + u32 qepmf; + u32 qepdf; + u32 ddr_sec_clk; + u32 qe_clk; + u32 brg_clk; +#endif if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; -#ifndef CFG_HRCW_HIGH -# error "CFG_HRCW_HIGH must be defined in board config file" -#endif /* CFG_HCWD_HIGH */ - -#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST) - -# ifndef CONFIG_83XX_CLKIN -# error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file" -# endif /* CONFIG_83XX_CLKIN */ -# ifdef CONFIG_83XX_PCICLK -# warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred" -# endif /* CONFIG_83XX_PCICLK */ - - /* PCI Host Mode */ - if (!(im->reset.rcwh & RCWH_PCIHOST)) { - /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH - * the im->reset.rcwhr PCI Host Mode is disabled - * FIXME: findout if there is a way to issue some warning */ - return -2; - } - if (im->clk.spmr & SPMR_CKID) { - /* PCI Clock is half CONFIG_83XX_CLKIN */ - pci_sync_in = CONFIG_83XX_CLKIN / 2; - } - else { - pci_sync_in = CONFIG_83XX_CLKIN; - } - -#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */ - -# ifdef CONFIG_83XX_CLKIN -# warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred" -# endif /* CONFIG_83XX_CLKIN */ -# ifndef CONFIG_83XX_PCICLK -# error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file" -# endif /* CONFIG_83XX_PCICLK */ - - /* PCI Agent Mode */ - if (im->reset.rcwh & RCWH_PCIHOST) { - /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH - * the im->reset.rcwhr PCI Host Mode is enabled */ - return -3; - } - pci_sync_in = CONFIG_83XX_PCICLK; - -#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */ - - /* we have up to date pci_sync_in */ - spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT); clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); - if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) { - csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2; - } - else { - csb_clk = pci_sync_in * spmf * (1 + clkin_div); + if (im->reset.rcwh & HRCWH_PCI_HOST) { +#if defined(CONFIG_83XX_CLKIN) + pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div); +#else + pci_sync_in = 0xDEADBEEF; +#endif + } else { +#if defined(CONFIG_83XX_PCICLK) + pci_sync_in = CONFIG_83XX_PCICLK; +#else + pci_sync_in = 0xDEADBEEF; +#endif } + spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT); + csb_clk = pci_sync_in * (1 + clkin_div) * spmf; + sccr = im->clk.sccr; + +#if defined(CONFIG_MPC8349) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -212,25 +185,8 @@ int get_clocks (void) /* unkown SCCR_TSEC2CM value */ return -5; } - i2c_clk = tsec2_clk; - switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { - case 0: - enc_clk = 0; - break; - case 1: - enc_clk = csb_clk; - break; - case 2: - enc_clk = csb_clk / 2; - break; - case 3: - enc_clk = csb_clk / 3; - break; - default: - /* unkown SCCR_ENCCM value */ - return -6; - } + i2c1_clk = tsec2_clk; switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) { case 0: @@ -274,8 +230,34 @@ int get_clocks (void) /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */ return -9; } +#endif +#if defined (CONFIG_MPC8360) + i2c1_clk = csb_clk; +#endif + i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ + switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { + case 0: + enc_clk = 0; + break; + case 1: + enc_clk = csb_clk; + break; + case 2: + enc_clk = csb_clk / 2; + break; + case 3: + enc_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_ENCCM value */ + return -6; + } +#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); +#else +#error Unknown MPC83xx chip +#endif lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; switch (lcrr) { case 2: @@ -287,10 +269,16 @@ int get_clocks (void) /* unknown lcrr */ return -10; } - +#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); - corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT; +#if defined (CONFIG_MPC8360) + ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); +#endif +#else +#error Unknown MPC83xx chip +#endif + corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5); if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) { /* corecnf_tab_index is too high, possibly worng value */ @@ -319,22 +307,36 @@ int get_clocks (void) return -12; } - gd->csb_clk = csb_clk ; - gd->tsec1_clk = tsec1_clk ; - gd->tsec2_clk = tsec2_clk ; - gd->core_clk = core_clk ; - gd->usbmph_clk = usbmph_clk; - gd->usbdr_clk = usbdr_clk ; - gd->i2c_clk = i2c_clk ; - gd->enc_clk = enc_clk ; - gd->lbiu_clk = lbiu_clk ; - gd->lclk_clk = lclk_clk ; - gd->ddr_clk = ddr_clk ; - gd->pci_clk = pci_sync_in; +#if defined (CONFIG_MPC8360) + qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT; + qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT; + qe_clk = (pci_sync_in * qepmf)/(1+qepdf); + brg_clk = qe_clk / 2; +#endif - gd->cpu_clk = gd->core_clk; - gd->bus_clk = gd->lbiu_clk; + gd->csb_clk = csb_clk; +#if defined(CONFIG_MPC8349) + gd->tsec1_clk = tsec1_clk; + gd->tsec2_clk = tsec2_clk; + gd->usbmph_clk = usbmph_clk; + gd->usbdr_clk = usbdr_clk; +#endif + gd->core_clk = core_clk; + gd->i2c1_clk = i2c1_clk; + gd->i2c2_clk = i2c2_clk; + gd->enc_clk = enc_clk; + gd->lbiu_clk = lbiu_clk; + gd->lclk_clk = lclk_clk; + gd->ddr_clk = ddr_clk; +#if defined (CONFIG_MPC8360) + gd->ddr_sec_clk = ddr_sec_clk; + gd->qe_clk = qe_clk; + gd->brg_clk = brg_clk; +#endif + gd->cpu_clk = gd->core_clk; + gd->bus_clk = gd->csb_clk; return 0; + } ulong get_ddr_clk(ulong dummy) @@ -357,14 +359,23 @@ int print_clock_conf (void) printf("Clock configuration:\n"); printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000); printf(" Core: %4d MHz\n",gd->core_clk/1000000); - debug(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000); +#if defined (CONFIG_MPC8360) + printf(" QE: %4d MHz\n",gd->qe_clk/1000000); +#endif + printf(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000); printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000); - debug(" DDR: %4d MHz\n",gd->ddr_clk/1000000); - debug(" I2C: %4d MHz\n",gd->i2c_clk/1000000); - debug(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000); - debug(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000); - debug(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000); - debug(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000); - + printf(" DDR: %4d MHz\n",gd->ddr_clk/1000000); +#if defined (CONFIG_MPC8360) + printf(" DDR Secondary: %4d MHz\n",gd->ddr_sec_clk/1000000); +#endif + printf(" SEC: %4d MHz\n",gd->enc_clk/1000000); + printf(" I2C1: %4d MHz\n",gd->i2c1_clk/1000000); + printf(" I2C2: %4d MHz\n",gd->i2c2_clk/1000000); +#if defined(CONFIG_MPC8349) + printf(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000); + printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000); + printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000); + printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000); +#endif return 0; } diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index 908007cbcb..79dcae416f 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -12,6 +12,8 @@ #define PVR_83xx 0x80830000 #define PVR_8349_REV10 (PVR_83xx | 0x0010) #define PVR_8349_REV11 (PVR_83xx | 0x0011) +#define PVR_8360_REV10 (PVR_83xx | 0x0020) +#define PVR_8360_REV11 (PVR_83xx | 0x0020) /* * Hardware Implementation-Dependent Register 0 (HID0) diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b73af96464..418315bef2 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -52,17 +52,27 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; +#if defined (CONFIG_MPC8349) u32 tsec1_clk; u32 tsec2_clk; - u32 core_clk; u32 usbmph_clk; u32 usbdr_clk; - u32 i2c_clk; +#endif /* CONFIG_MPC8349 */ + u32 core_clk; + u32 i2c1_clk; + u32 i2c2_clk; u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_QE) + u32 qe_clk; + u32 brg_clk; +#endif /* CONFIG_QE */ +#if defined (CONFIG_MPC8360) + u32 ddr_sec_clk; +#endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h new file mode 100644 index 0000000000..0ae60618ec --- /dev/null +++ b/include/configs/MPC8360EMDS.h @@ -0,0 +1,585 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ +#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CE_PLL_VCO_DIV_4 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X6 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_PCICKDRV_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCICKDRV_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#endif + +/* + * System IO Config + */ +#define CFG_SICRH 0x00000000 +#define CFG_SICRL 0x40000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMRBAR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */ +#else +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) +#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ +#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ +#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ +#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * The reserved memory + */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * CS4 on Local Bus, to PIB + */ +#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * CS5 on Local Bus, to PIB + */ +#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 0x3F /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * Environment + */ + +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C ) +#endif +#endif + +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMRBAR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* Local bus SDRAM: cacheable */ +#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_ETHADDR 00:04:9f:ef:01:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=400000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "bootm $loadaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "bootm $loadaddr $ramdiskaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index d5b7bcabf4..03dd0cafd2 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -8,16 +8,6 @@ * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ /* @@ -89,8 +79,30 @@ /* * The device ID and revision numbers */ -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349E_REV11 0x80300101 +#define SPR_8349E_REV10 0x80300100 +#define SPR_8349_REV10 0x80310100 +#define SPR_8347E_REV10_TBGA 0x80320100 +#define SPR_8347_REV10_TBGA 0x80330100 +#define SPR_8347E_REV10_PBGA 0x80340100 +#define SPR_8347_REV10_PBGA 0x80350100 +#define SPR_8343E_REV10 0x80360100 +#define SPR_8343_REV10 0x80370100 + +#define SPR_8349E_REV11 0x80300101 +#define SPR_8349_REV11 0x80310101 +#define SPR_8347E_REV11_TBGA 0x80320101 +#define SPR_8347_REV11_TBGA 0x80330101 +#define SPR_8347E_REV11_PBGA 0x80340101 +#define SPR_8347_REV11_PBGA 0x80350101 +#define SPR_8343E_REV11 0x80360101 +#define SPR_8343_REV11 0x80370101 + +#define SPR_8360E_REV10 0x80480010 +#define SPR_8360_REV10 0x80490010 +#define SPR_8360E_REV11 0x80480011 +#define SPR_8360_REV11 0x80490011 +#define SPR_8360E_REV12 0x80480012 +#define SPR_8360_REV12 0x80490012 /* * Base Registers & Option Registers @@ -122,9 +134,17 @@ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ +#if defined (CONFIG_MPC8360) +#define BR_ATOM 0x0000000C +#define BR_ATOM_SHIFT 2 +#endif #define BR_V 0x00000001 #define BR_V_SHIFT 0 +#if defined (CONFIG_MPC8349) #define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) +#elif defined (CONFIG_MPC8360) +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) +#endif #define OR0 0x5004 #define OR1 0x500C @@ -207,14 +227,21 @@ #define HRCWH_PCI_AGENT 0x00000000 #define HRCWH_PCI_HOST 0x80000000 +#if defined (CONFIG_MPC8349) #define HRCWH_32_BIT_PCI 0x00000000 #define HRCWH_64_BIT_PCI 0x40000000 +#endif #define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 +#if defined (CONFIG_MPC8349) #define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 +#elif defined (CONFIG_MPC8360) +#define HRCWH_PCICKDRV_DISABLE 0x00000000 +#define HRCWH_PCICKDRV_ENABLE 0x10000000 +#endif #define HRCWH_CORE_DISABLE 0x08000000 #define HRCWH_CORE_ENABLE 0x00000000 @@ -231,11 +258,14 @@ #define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 #define HRCWH_ROM_LOC_PCI1 0x00100000 +#if defined (CONFIG_MPC8349) #define HRCWH_ROM_LOC_PCI2 0x00200000 +#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +#if defined (CONFIG_MPC8349) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 #define HRCWH_TSEC1M_IN_GMII 0x00008000 @@ -245,6 +275,12 @@ #define HRCWH_TSEC2M_IN_RTBI 0x00001000 #define HRCWH_TSEC2M_IN_GMII 0x00002000 #define HRCWH_TSEC2M_IN_TBI 0x00003000 +#endif + +#if defined (CONFIG_MPC8360) +#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 +#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 +#endif #define HRCWH_BIG_ENDIAN 0x00000000 #define HRCWH_LITTLE_ENDIAN 0x00000008 @@ -293,6 +329,47 @@ #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 #define HRCWL_CORE_TO_CSB_3X1 0x00060000 +#if defined (CONFIG_MPC8360) +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 + +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F +#endif + /* * LCRR - Clock Ratio Register (10.3.1.16) */ @@ -346,6 +423,7 @@ | SCCR_TSEC2CM_3 \ | SCCR_ENCCM_3 \ | SCCR_USBCM_3 ) + #define SCCR_DEFAULT 0xFFFFFFFF #endif /* __MPC83XX_H__ */ From 7737d5c658c606f999dfbe3e86b0fed49e5c50ef Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Fri, 3 Nov 2006 12:11:15 -0600 Subject: [PATCH 24/72] mpc83xx: add QE ethernet support this patch adds support for the QUICC Engine based UCC gigabit ethernet device. --- Makefile | 3 + board/mpc8360emds/mpc8360emds.c | 56 ++ cpu/mpc83xx/Makefile | 2 +- cpu/mpc83xx/cpu_init.c | 40 +- cpu/mpc83xx/qe_io.c | 85 +++ drivers/qe/Makefile | 43 ++ drivers/qe/qe.c | 254 +++++++ drivers/qe/qe.h | 237 ++++++ drivers/qe/uccf.c | 404 ++++++++++ drivers/qe/uccf.h | 130 ++++ drivers/qe/uec.c | 1266 +++++++++++++++++++++++++++++++ drivers/qe/uec.h | 716 +++++++++++++++++ drivers/qe/uec_phy.c | 604 +++++++++++++++ drivers/qe/uec_phy.h | 256 +++++++ include/asm-ppc/global_data.h | 2 + include/configs/MPC8360EMDS.h | 29 + include/ioports.h | 11 + net/eth.c | 7 + 18 files changed, 4138 insertions(+), 7 deletions(-) create mode 100644 cpu/mpc83xx/qe_io.c create mode 100644 drivers/qe/Makefile create mode 100644 drivers/qe/qe.c create mode 100644 drivers/qe/qe.h create mode 100644 drivers/qe/uccf.c create mode 100644 drivers/qe/uccf.h create mode 100644 drivers/qe/uec.c create mode 100644 drivers/qe/uec.h create mode 100644 drivers/qe/uec_phy.c create mode 100644 drivers/qe/uec_phy.h diff --git a/Makefile b/Makefile index 323aafc027..45c1a49e00 100644 --- a/Makefile +++ b/Makefile @@ -203,6 +203,9 @@ LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a +ifeq ($(CPU),mpc83xx) +LIBS += drivers/qe/qe.a +endif LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index d70a4c3cbd..5eadcd39eb 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -29,6 +29,62 @@ #include #endif +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {0, 3, 1, 0, 1}, /* TxD0 */ + {0, 4, 1, 0, 1}, /* TxD1 */ + {0, 5, 1, 0, 1}, /* TxD2 */ + {0, 6, 1, 0, 1}, /* TxD3 */ + {1, 6, 1, 0, 3}, /* TxD4 */ + {1, 7, 1, 0, 1}, /* TxD5 */ + {1, 9, 1, 0, 2}, /* TxD6 */ + {1, 10, 1, 0, 2}, /* TxD7 */ + {0, 9, 2, 0, 1}, /* RxD0 */ + {0, 10, 2, 0, 1}, /* RxD1 */ + {0, 11, 2, 0, 1}, /* RxD2 */ + {0, 12, 2, 0, 1}, /* RxD3 */ + {0, 13, 2, 0, 1}, /* RxD4 */ + {1, 1, 2, 0, 2}, /* RxD5 */ + {1, 0, 2, 0, 2}, /* RxD6 */ + {1, 4, 2, 0, 2}, /* RxD7 */ + {0, 7, 1, 0, 1}, /* TX_EN */ + {0, 8, 1, 0, 1}, /* TX_ER */ + {0, 15, 2, 0, 1}, /* RX_DV */ + {0, 16, 2, 0, 1}, /* RX_ER */ + {0, 0, 2, 0, 1}, /* RX_CLK */ + {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ + {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ + /* GETH2 */ + {0, 17, 1, 0, 1}, /* TxD0 */ + {0, 18, 1, 0, 1}, /* TxD1 */ + {0, 19, 1, 0, 1}, /* TxD2 */ + {0, 20, 1, 0, 1}, /* TxD3 */ + {1, 2, 1, 0, 1}, /* TxD4 */ + {1, 3, 1, 0, 2}, /* TxD5 */ + {1, 5, 1, 0, 3}, /* TxD6 */ + {1, 8, 1, 0, 3}, /* TxD7 */ + {0, 23, 2, 0, 1}, /* RxD0 */ + {0, 24, 2, 0, 1}, /* RxD1 */ + {0, 25, 2, 0, 1}, /* RxD2 */ + {0, 26, 2, 0, 1}, /* RxD3 */ + {0, 27, 2, 0, 1}, /* RxD4 */ + {1, 12, 2, 0, 2}, /* RxD5 */ + {1, 13, 2, 0, 3}, /* RxD6 */ + {1, 11, 2, 0, 2}, /* RxD7 */ + {0, 21, 1, 0, 1}, /* TX_EN */ + {0, 22, 1, 0, 1}, /* TX_ER */ + {0, 29, 2, 0, 1}, /* RX_DV */ + {0, 30, 2, 0, 1}, /* RX_ER */ + {0, 31, 2, 0, 1}, /* RX_CLK */ + {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ + {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ + + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + int board_early_init_f(void) { volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index 1aa0005d4d..e254ef98f6 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a START = start.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - i2c.o spd_sdram.o + i2c.o spd_sdram.o qe_io.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 999fe71964..eb8f8c042f 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -31,6 +31,30 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_QE +extern qe_iop_conf_t qe_iop_conf_tab[]; +extern void qe_config_iopin(u8 port, u8 pin, int dir, + int open_drain, int assign); +extern void qe_init(uint qe_base); +extern void qe_reset(void); + +static void config_qe_ioports(void) +{ + u8 port, pin; + int dir, open_drain, assign; + int i; + + for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { + port = qe_iop_conf_tab[i].port; + pin = qe_iop_conf_tab[i].pin; + dir = qe_iop_conf_tab[i].dir; + open_drain = qe_iop_conf_tab[i].open_drain; + assign = qe_iop_conf_tab[i].assign; + qe_config_iopin(port, pin, dir, open_drain, assign); + } +} +#endif + /* * Breathe some life into the CPU... * @@ -100,6 +124,10 @@ void cpu_init_f (volatile immap_t * im) #ifdef CFG_SICRL im->sysconf.sicrl = CFG_SICRL; #endif +#ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +#endif /* * Memory Controller: @@ -188,12 +216,12 @@ void cpu_init_f (volatile immap_t * im) #endif } - -/* - * Initialize higher level parts of CPU like time base and timers. - */ - int cpu_init_r (void) { +#ifdef CONFIG_QE + uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */ + qe_init(qe_base); + qe_reset(); +#endif return 0; } diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c new file mode 100644 index 0000000000..11cf3722bd --- /dev/null +++ b/cpu/mpc83xx/qe_io.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_83xx.h" + +#if defined(CONFIG_QE) +#define NUM_OF_PINS 32 +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) +{ + u32 pin_2bit_mask; + u32 pin_2bit_dir; + u32 pin_2bit_assign; + u32 pin_1bit_mask; + u32 tmp_val; + volatile immap_t *im = (volatile immap_t *)CFG_IMMRBAR; + volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio; + + /* Caculate pin location and 2bit mask and dir */ + pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + + /* Setup the direction */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ + in_be32(&par_io->ioport[port].dir2) : + in_be32(&par_io->ioport[port].dir1); + + if (pin > (NUM_OF_PINS/2) -1) { + out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val); + } else { + out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val); + } + + /* Calculate pin location for 1bit mask */ + pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); + + /* Setup the open drain */ + tmp_val = in_be32(&par_io->ioport[port].podr); + if (open_drain) { + out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val); + } else { + out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val); + } + + /* Setup the assignment */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? + in_be32(&par_io->ioport[port].ppar2): + in_be32(&par_io->ioport[port].ppar1); + pin_2bit_assign = (u32)(assign + << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); + + /* Clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS/2) - 1) { + out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val); + } else { + out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val); + } +} + +#endif /* CONFIG_QE */ diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile new file mode 100644 index 0000000000..4844181b8e --- /dev/null +++ b/drivers/qe/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2006 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)qe.a + +COBJS := qe.o uccf.o uec.o uec_phy.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c new file mode 100644 index 0000000000..5f209629f4 --- /dev/null +++ b/drivers/qe/qe.c @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_qe.h" +#include "qe.h" + +#if defined(CONFIG_QE) +qe_map_t *qe_immr = NULL; +static qe_snum_t snums[QE_NUM_OF_SNUM]; + +void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) +{ + u32 cecr; + + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG)); + } else { + out_be32(&qe_immr->cp.cecdr, cmd_data); + out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG | + ((u32) mcn<cp.cecr); + } while (cecr & QE_CR_FLG); + + return; +} + +uint qe_muram_alloc(uint size, uint align) +{ + DECLARE_GLOBAL_DATA_PTR; + + uint retloc; + uint align_mask, off; + uint savebase; + + align_mask = align - 1; + savebase = gd->mp_alloc_base; + + if ((off = (gd->mp_alloc_base & align_mask)) != 0) + gd->mp_alloc_base += (align - off); + + if ((off = size & align_mask) != 0) + size += (align - off); + + if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) { + gd->mp_alloc_base = savebase; + printf("%s: ran out of ram.\n", __FUNCTION__); + } + + retloc = gd->mp_alloc_base; + gd->mp_alloc_base += size; + + memset((void *)&qe_immr->muram[retloc], 0, size); + + __asm__ __volatile__("sync"); + + return retloc; +} + +void *qe_muram_addr(uint offset) +{ + return (void *)&qe_immr->muram[offset]; +} + +static void qe_sdma_init(void) +{ + volatile sdma_t *p; + uint sdma_buffer_base; + + p = (volatile sdma_t *)&qe_immr->sdma; + + /* All of DMA transaction in bus 1 */ + out_be32(&p->sdaqr, 0); + out_be32(&p->sdaqmr, 0); + + /* Allocate 2KB temporary buffer for sdma */ + sdma_buffer_base = qe_muram_alloc(2048, 64); + out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK); + + /* Clear sdma status */ + out_be32(&p->sdsr, 0x03000000); + + /* Enable global mode on bus 1, and 2KB buffer size */ + out_be32(&p->sdmr, QE_SDMR_GLB_1_MSK | (0x3 << QE_SDMR_CEN_SHIFT)); +} + +static u8 thread_snum[QE_NUM_OF_SNUM] = { + 0x04, 0x05, 0x0c, 0x0d, + 0x14, 0x15, 0x1c, 0x1d, + 0x24, 0x25, 0x2c, 0x2d, + 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xa8, 0xa9, + 0xb8, 0xb9, 0xc8, 0xc9, + 0xd8, 0xd9, 0xe8, 0xe9 +}; + +static void qe_snums_init(void) +{ + int i; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + snums[i].state = QE_SNUM_STATE_FREE; + snums[i].num = thread_snum[i]; + } +} + +int qe_get_snum(void) +{ + int snum = -EBUSY; + int i; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + + return snum; +} + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} + +void qe_init(uint qe_base) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Init the QE IMMR base */ + qe_immr = (qe_map_t *)qe_base; + + gd->mp_alloc_base = QE_DATAONLY_BASE; + gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE; + + qe_sdma_init(); + qe_snums_init(); +} + +void qe_reset(void) +{ + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void qe_assign_page(uint snum, uint para_ram_base) +{ + u32 cecr; + + out_be32(&qe_immr->cp.cecdr, para_ram_base); + out_be32(&qe_immr->cp.cecr, ((u32) snum<cp.cecr); + } while (cecr & QE_CR_FLG ); + + return; +} + +/* + * brg: 0~15 as BRG1~BRG16 + rate: baud rate + * BRG input clock comes from the BRGCLK (internal clock generated from + the QE clock, it is one-half of the QE clock), If need the clock source + from CLKn pin, we have te change the function. + */ + +#define BRG_CLK (gd->brg_clk) + +int qe_set_brg(uint brg, uint rate) +{ + DECLARE_GLOBAL_DATA_PTR; + volatile uint *bp; + u32 divisor; + int div16 = 0; + + if (brg >= QE_NUM_OF_BRGS) + return -EINVAL; + bp = (uint *)&qe_immr->brg.brgc1; + bp += brg; + + divisor = (BRG_CLK / rate); + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = 1; + divisor /= 16; + } + + *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; + __asm__ __volatile__("sync"); + + if (div16) { + *bp |= QE_BRGC_DIV16; + __asm__ __volatile__("sync"); + } + + return 0; +} + +/* Set ethernet MII clock master +*/ +int qe_set_mii_clk_src(int ucc_num) +{ + u32 cmxgcr; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { + printf("%s: ucc num not in ranges\n", __FUNCTION__); + return -EINVAL; + } + + cmxgcr = in_be32(&qe_immr->qmx.cmxgcr); + cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK; + cmxgcr |= (ucc_num <qmx.cmxgcr, cmxgcr); + + return 0; +} + +#endif /* CONFIG_QE */ diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h new file mode 100644 index 0000000000..f7f8ed0a72 --- /dev/null +++ b/drivers/qe/qe.h @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __QE_H__ +#define __QE_H__ + +#include "common.h" + +#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_BRGS 16 +#define UCC_MAX_NUM 8 + +#define QE_DATAONLY_BASE (uint)(128) +#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE) + +/* QE threads SNUM +*/ +typedef enum qe_snum_state { + QE_SNUM_STATE_USED, /* used */ + QE_SNUM_STATE_FREE /* free */ +} qe_snum_state_e; + +typedef struct qe_snum { + u8 num; /* snum */ + qe_snum_state_e state; /* state */ +} qe_snum_t; + +/* QE RISC allocation +*/ +typedef enum qe_risc_allocation { + QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ + QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ + QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* RISC 1 or RISC 2 */ +} qe_risc_allocation_e; + +/* QE CECR commands for UCC fast. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_INSERT_CELL 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_CELL_POOL_GET 0x0000000b +#define QE_CELL_POOL_PUT 0x0000000c +#define QE_IMA_HOST_CMD 0x0000000d +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b + +/* QE CECR Sub Block Code - sub block code of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. +*/ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D +#define QE_CR_PROTOCOL_SHIFT 6 + +/* QE ASSIGN PAGE command +*/ +#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17 + +/* Communication Direction. +*/ +typedef enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +} comm_dir_e; + +/* Clocks and BRG's +*/ +typedef enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_CLK_DUMMY +} qe_clock_e; + +/* QE CMXGCR register +*/ +#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 + +/* QE CMXUCR registers + */ +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE BRG configuration register +*/ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE SDMA registers +*/ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign); +void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data); +uint qe_muram_alloc(uint size, uint align); +void *qe_muram_addr(uint offset); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +void qe_init(uint qe_base); +void qe_reset(void); +void qe_assign_page(uint snum, uint para_ram_base); +int qe_set_brg(uint brg, uint rate); +int qe_set_mii_clk_src(int ucc_num); + +#endif /* __QE_H__ */ diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c new file mode 100644 index 0000000000..25f74826c0 --- /dev/null +++ b/drivers/qe/uccf.c @@ -0,0 +1,404 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "malloc.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_qe.h" +#include "qe.h" +#include "uccf.h" + +#if defined(CONFIG_QE) +void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} + +u32 ucc_fast_get_qe_cr_subblock(int ucc_num) +{ + switch (ucc_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, + u8 *reg_num, u8 *shift) +{ + switch (ucc_num) { + case 0: /* UCC1 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 16; + break; + case 2: /* UCC3 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 0; + break; + case 4: /* UCC5 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 16; + break; + case 6: /* UCC7 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 0; + break; + case 1: /* UCC2 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 16; + break; + case 3: /* UCC4 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 0; + break; + case 5: /* UCC6 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 16; + break; + case 7: /* UCC8 */ + *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 0; + break; + default: + break; + } +} + +static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) +{ + volatile u32 *p_cmxucr; + u8 reg_num; + u8 shift; + u32 clockBits; + u32 clockMask; + int source = -1; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { + printf("%s: bad comm mode type passed\n", __FUNCTION__); + return -EINVAL; + } + + ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + + switch (reg_num) { + case 1: + switch (clock) { + case QE_BRG1: source = 1; break; + case QE_BRG2: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK9: source = 5; break; + case QE_CLK10: source = 6; break; + case QE_CLK11: source = 7; break; + case QE_CLK12: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 2: + switch (clock) { + case QE_BRG5: source = 1; break; + case QE_BRG6: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK13: source = 5; break; + case QE_CLK14: source = 6; break; + case QE_CLK19: source = 7; break; + case QE_CLK20: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 3: + switch (clock) { + case QE_BRG9: source = 1; break; + case QE_BRG10: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK3: source = 5; break; + case QE_CLK4: source = 6; break; + case QE_CLK17: source = 7; break; + case QE_CLK18: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + case QE_CLK16: source = 11; break; + default: source = -1; break; + } + break; + case 4: + switch (clock) { + case QE_BRG13: source = 1; break; + case QE_BRG14: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK5: source = 5; break; + case QE_CLK6: source = 6; break; + case QE_CLK21: source = 7; break; + case QE_CLK22: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + case QE_CLK16: source = 11; break; + default: source = -1; break; + } + break; + default: + source = -1; + break; + } + + if (source == -1) { + printf("%s: Bad combination of clock and UCC\n", __FUNCTION__); + return -ENOENT; + } + + clockBits = (u32) source; + clockMask = QE_CMXUCR_TX_CLK_SRC_MASK; + if (mode == COMM_DIR_RX) { + clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */ + clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */ + } + clockBits <<= shift; + clockMask <<= shift; + + out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits); + + return 0; +} + +static uint ucc_get_reg_baseaddr(int ucc_num) +{ + uint base = 0; + + /* check if the UCC number is in range */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { + printf("%s: the UCC num not in ranges\n", __FUNCTION__); + return 0; + } + + switch (ucc_num) { + case 0: base = 0x00002000; break; + case 1: base = 0x00003000; break; + case 2: base = 0x00002200; break; + case 3: base = 0x00003200; break; + case 4: base = 0x00002400; break; + case 5: base = 0x00003400; break; + case 6: base = 0x00002600; break; + case 7: base = 0x00003600; break; + default: break; + } + + base = (uint)qe_immr + base; + return base; +} + +void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode) +{ + ucc_fast_t *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} + +void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode) +{ + ucc_fast_t *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} + +int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret) +{ + ucc_fast_private_t *uccf; + ucc_fast_t *uf_regs; + + if (!uf_info) + return -EINVAL; + + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + printf("%s: Illagal UCC number!\n", __FUNCTION__); + return -EINVAL; + } + + uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t)); + if (!uccf) { + printf("%s: No memory for UCC fast data structure!\n", + __FUNCTION__); + return -ENOMEM; + } + memset(uccf, 0, sizeof(ucc_fast_private_t)); + + /* Save fast UCC structure */ + uccf->uf_info = uf_info; + uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num); + + if (uccf->uf_regs == NULL) { + printf("%s: No memory map for UCC fast controller!\n", + __FUNCTION__); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + + uf_regs = uccf->uf_regs; + uccf->p_ucce = (u32 *) &(uf_regs->ucce); + uccf->p_uccm = (u32 *) &(uf_regs->uccm); + + /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */ + out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX + | UCC_GUEMR_MODE_FAST_TX); + + /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */ + out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH); + + /* Set the Giga ethernet VFIFO stuff */ + if (uf_info->eth_type == GIGA_ETH) { + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT + + UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, + uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, + uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT); + out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT); + out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT); + out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT); + out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT); + out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT); + } + + /* Set the Fast ethernet VFIFO stuff */ + if (uf_info->eth_type == FAST_ETH) { + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(UCC_GETH_UTFS_INIT, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(UCC_GETH_URFS_INIT + + UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, + uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, + uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT); + out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT); + out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT); + out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT); + out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT); + out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT); + } + + /* Rx clock routing */ + if (uf_info->rx_clock != QE_CLK_NONE) { + if (ucc_set_clk_src(uf_info->ucc_num, + uf_info->rx_clock, COMM_DIR_RX)) { + printf("%s: Illegal value for parameter 'RxClock'.\n", + __FUNCTION__); + return -EINVAL; + } + } + + /* Tx clock routing */ + if (uf_info->tx_clock != QE_CLK_NONE) { + if (ucc_set_clk_src(uf_info->ucc_num, + uf_info->tx_clock, COMM_DIR_TX)) { + printf("%s: Illegal value for parameter 'TxClock'.\n", + __FUNCTION__); + return -EINVAL; + } + } + + /* Clear interrupt mask register to disable all of interrupts */ + out_be32(&uf_regs->uccm, 0x0); + + /* Writing '1' to clear all of envents */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h new file mode 100644 index 0000000000..1ff9e1daf5 --- /dev/null +++ b/drivers/qe/uccf.h @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __UCCF_H__ +#define __UCCF_H__ + +#include "common.h" +#include "qe.h" + +/* Fast or Giga ethernet +*/ +typedef enum enet_type { + FAST_ETH, + GIGA_ETH, +} enet_type_e; + +/* General UCC Extended Mode Register +*/ +#define UCC_GUEMR_MODE_MASK_RX 0x02 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_RX 0x02 +#define UCC_GUEMR_MODE_FAST_TX 0x01 +#define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 must be set 1 */ + +/* General UCC FAST Mode Register +*/ +#define UCC_FAST_GUMR_TCI 0x20000000 +#define UCC_FAST_GUMR_TRX 0x10000000 +#define UCC_FAST_GUMR_TTX 0x08000000 +#define UCC_FAST_GUMR_CDP 0x04000000 +#define UCC_FAST_GUMR_CTSP 0x02000000 +#define UCC_FAST_GUMR_CDS 0x01000000 +#define UCC_FAST_GUMR_CTSS 0x00800000 +#define UCC_FAST_GUMR_TXSY 0x00020000 +#define UCC_FAST_GUMR_RSYN 0x00010000 +#define UCC_FAST_GUMR_RTSM 0x00002000 +#define UCC_FAST_GUMR_REVD 0x00000400 +#define UCC_FAST_GUMR_ENR 0x00000020 +#define UCC_FAST_GUMR_ENT 0x00000010 + +/* GUMR [MODE] bit maps +*/ +#define UCC_FAST_GUMR_HDLC 0x00000000 +#define UCC_FAST_GUMR_QMC 0x00000002 +#define UCC_FAST_GUMR_UART 0x00000004 +#define UCC_FAST_GUMR_BISYNC 0x00000008 +#define UCC_FAST_GUMR_ATM 0x0000000a +#define UCC_FAST_GUMR_ETH 0x0000000c + +/* Transmit On Demand (UTORD) +*/ +#define UCC_SLOW_TOD 0x8000 +#define UCC_FAST_TOD 0x8000 + +/* Fast Ethernet (10/100 Mbps) +*/ +#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size */ +#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */ +#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */ +#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */ +#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ +#define UCC_GETH_UTFTT_INIT 128 + +/* Gigabit Ethernet (1000 Mbps) +*/ +#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */ +#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */ +#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */ +#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual FIFO size */ +#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */ +#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */ + +/* UCC fast alignment +*/ +#define UCC_FAST_RX_ALIGN 4 +#define UCC_FAST_MRBLR_ALIGNMENT 4 +#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 + +/* Sizes +*/ +#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8 + +/* UCC fast structure. +*/ +typedef struct ucc_fast_info { + int ucc_num; + qe_clock_e rx_clock; + qe_clock_e tx_clock; + enet_type_e eth_type; +} ucc_fast_info_t; + +typedef struct ucc_fast_private { + ucc_fast_info_t *uf_info; + ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */ + u32 *p_ucce; /* a pointer to the event register */ + u32 *p_uccm; /* a pointer to the mask register */ + int enabled_tx; /* whether UCC is enabled for Tx (ENT) */ + int enabled_rx; /* whether UCC is enabled for Rx (ENR) */ + u32 ucc_fast_tx_virtual_fifo_base_offset; + u32 ucc_fast_rx_virtual_fifo_base_offset; +} ucc_fast_private_t; + +void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf); +u32 ucc_fast_get_qe_cr_subblock(int ucc_num); +void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode); +void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode); +int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret); + +#endif /* __UCCF_H__ */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c new file mode 100644 index 0000000000..f640c81916 --- /dev/null +++ b/drivers/qe/uec.c @@ -0,0 +1,1266 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "net.h" +#include "malloc.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_qe.h" +#include "qe.h" +#include "uccf.h" +#include "uec.h" +#include "uec_phy.h" + +#if defined(CONFIG_QE) + +#ifdef CONFIG_UEC_ETH1 +static uec_info_t eth1_uec_info = { + .uf_info = { + .ucc_num = CFG_UEC1_UCC_NUM, + .rx_clock = CFG_UEC1_RX_CLK, + .tx_clock = CFG_UEC1_TX_CLK, + .eth_type = CFG_UEC1_ETH_TYPE, + }, + .num_threads_tx = UEC_NUM_OF_THREADS_4, + .num_threads_rx = UEC_NUM_OF_THREADS_4, + .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .tx_bd_ring_len = 16, + .rx_bd_ring_len = 16, + .phy_address = CFG_UEC1_PHY_ADDR, + .enet_interface = CFG_UEC1_INTERFACE_MODE, +}; +#endif +#ifdef CONFIG_UEC_ETH2 +static uec_info_t eth2_uec_info = { + .uf_info = { + .ucc_num = CFG_UEC2_UCC_NUM, + .rx_clock = CFG_UEC2_RX_CLK, + .tx_clock = CFG_UEC2_TX_CLK, + .eth_type = CFG_UEC2_ETH_TYPE, + }, + .num_threads_tx = UEC_NUM_OF_THREADS_4, + .num_threads_rx = UEC_NUM_OF_THREADS_4, + .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .tx_bd_ring_len = 16, + .rx_bd_ring_len = 16, + .phy_address = CFG_UEC2_PHY_ADDR, + .enet_interface = CFG_UEC2_INTERFACE_MODE, +}; +#endif + +static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) +{ + uec_t *uec_regs; + u32 maccfg1; + + if (!uec) { + printf("%s: uec not initial\n", __FUNCTION__); + return -EINVAL; + } + uec_regs = uec->uec_regs; + + maccfg1 = in_be32(&uec_regs->maccfg1); + + if (mode & COMM_DIR_TX) { + maccfg1 |= MACCFG1_ENABLE_TX; + out_be32(&uec_regs->maccfg1, maccfg1); + uec->mac_tx_enabled = 1; + } + + if (mode & COMM_DIR_RX) { + maccfg1 |= MACCFG1_ENABLE_RX; + out_be32(&uec_regs->maccfg1, maccfg1); + uec->mac_rx_enabled = 1; + } + + return 0; +} + +static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode) +{ + uec_t *uec_regs; + u32 maccfg1; + + if (!uec) { + printf("%s: uec not initial\n", __FUNCTION__); + return -EINVAL; + } + uec_regs = uec->uec_regs; + + maccfg1 = in_be32(&uec_regs->maccfg1); + + if (mode & COMM_DIR_TX) { + maccfg1 &= ~MACCFG1_ENABLE_TX; + out_be32(&uec_regs->maccfg1, maccfg1); + uec->mac_tx_enabled = 0; + } + + if (mode & COMM_DIR_RX) { + maccfg1 &= ~MACCFG1_ENABLE_RX; + out_be32(&uec_regs->maccfg1, maccfg1); + uec->mac_rx_enabled = 0; + } + + return 0; +} + +static int uec_graceful_stop_tx(uec_private_t *uec) +{ + ucc_fast_t *uf_regs; + u32 cecr_subblock; + u32 ucce; + + if (!uec || !uec->uccf) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + + uf_regs = uec->uccf->uf_regs; + + /* Clear the grace stop event */ + out_be32(&uf_regs->ucce, UCCE_GRA); + + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, + (u8)QE_CR_PROTOCOL_ETHERNET, 0); + + /* Wait for command to complete */ + do { + ucce = in_be32(&uf_regs->ucce); + } while (! (ucce & UCCE_GRA)); + + uec->grace_stopped_tx = 1; + + return 0; +} + +static int uec_graceful_stop_rx(uec_private_t *uec) +{ + u32 cecr_subblock; + u8 ack; + + if (!uec) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + + if (!uec->p_rx_glbl_pram) { + printf("%s: No init rx global parameter\n", __FUNCTION__); + return -EINVAL; + } + + /* Clear acknowledge bit */ + ack = uec->p_rx_glbl_pram->rxgstpack; + ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; + uec->p_rx_glbl_pram->rxgstpack = ack; + + /* Keep issuing cmd and checking ack bit until it is asserted */ + do { + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, + (u8)QE_CR_PROTOCOL_ETHERNET, 0); + ack = uec->p_rx_glbl_pram->rxgstpack; + } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX )); + + uec->grace_stopped_rx = 1; + + return 0; +} + +static int uec_restart_tx(uec_private_t *uec) +{ + u32 cecr_subblock; + + if (!uec || !uec->uec_info) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_TX, cecr_subblock, + (u8)QE_CR_PROTOCOL_ETHERNET, 0); + + uec->grace_stopped_tx = 0; + + return 0; +} + +static int uec_restart_rx(uec_private_t *uec) +{ + u32 cecr_subblock; + + if (!uec || !uec->uec_info) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_RX, cecr_subblock, + (u8)QE_CR_PROTOCOL_ETHERNET, 0); + + uec->grace_stopped_rx = 0; + + return 0; +} + +static int uec_open(uec_private_t *uec, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + + if (!uec || !uec->uccf) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + uccf = uec->uccf; + + /* check if the UCC number is in range. */ + if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { + printf("%s: ucc_num out of range.\n", __FUNCTION__); + return -EINVAL; + } + + /* Enable MAC */ + uec_mac_enable(uec, mode); + + /* Enable UCC fast */ + ucc_fast_enable(uccf, mode); + + /* RISC microcode start */ + if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) { + uec_restart_tx(uec); + } + if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) { + uec_restart_rx(uec); + } + + return 0; +} + +static int uec_stop(uec_private_t *uec, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + + if (!uec || !uec->uccf) { + printf("%s: No handle passed.\n", __FUNCTION__); + return -EINVAL; + } + uccf = uec->uccf; + + /* check if the UCC number is in range. */ + if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { + printf("%s: ucc_num out of range.\n", __FUNCTION__); + return -EINVAL; + } + /* Stop any transmissions */ + if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) { + uec_graceful_stop_tx(uec); + } + /* Stop any receptions */ + if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) { + uec_graceful_stop_rx(uec); + } + + /* Disable the UCC fast */ + ucc_fast_disable(uec->uccf, mode); + + /* Disable the MAC */ + uec_mac_disable(uec, mode); + + return 0; +} + +static int uec_set_mac_duplex(uec_private_t *uec, int duplex) +{ + uec_t *uec_regs; + u32 maccfg2; + + if (!uec) { + printf("%s: uec not initial\n", __FUNCTION__); + return -EINVAL; + } + uec_regs = uec->uec_regs; + + if (duplex == DUPLEX_HALF) { + maccfg2 = in_be32(&uec_regs->maccfg2); + maccfg2 &= ~MACCFG2_FDX; + out_be32(&uec_regs->maccfg2, maccfg2); + } + + if (duplex == DUPLEX_FULL) { + maccfg2 = in_be32(&uec_regs->maccfg2); + maccfg2 |= MACCFG2_FDX; + out_be32(&uec_regs->maccfg2, maccfg2); + } + + return 0; +} + +static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) +{ + enet_interface_e enet_if_mode; + uec_info_t *uec_info; + uec_t *uec_regs; + u32 upsmr; + u32 maccfg2; + + if (!uec) { + printf("%s: uec not initial\n", __FUNCTION__); + return -EINVAL; + } + + uec_info = uec->uec_info; + uec_regs = uec->uec_regs; + enet_if_mode = if_mode; + + maccfg2 = in_be32(&uec_regs->maccfg2); + maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; + + upsmr = in_be32(&uec->uccf->uf_regs->upsmr); + upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); + + switch (enet_if_mode) { + case ENET_100_MII: + case ENET_10_MII: + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + break; + case ENET_1000_GMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + break; + case ENET_1000_TBI: + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + upsmr |= UPSMR_TBIM; + break; + case ENET_1000_RTBI: + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + upsmr |= (UPSMR_RPM | UPSMR_TBIM); + break; + case ENET_1000_RGMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + upsmr |= UPSMR_RPM; + break; + case ENET_100_RGMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + upsmr |= UPSMR_RPM; + break; + case ENET_10_RGMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + upsmr |= (UPSMR_RPM | UPSMR_R10M); + break; + case ENET_100_RMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + upsmr |= UPSMR_RMM; + break; + case ENET_10_RMII: + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + upsmr |= (UPSMR_R10M | UPSMR_RMM); + break; + default: + return -EINVAL; + break; + } + out_be32(&uec_regs->maccfg2, maccfg2); + out_be32(&uec->uccf->uf_regs->upsmr, upsmr); + + return 0; +} + +static int init_mii_management_configuration(uec_t *uec_regs) +{ + uint timeout = 0x1000; + u32 miimcfg = 0; + + miimcfg = in_be32(&uec_regs->miimcfg); + miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; + out_be32(&uec_regs->miimcfg, miimcfg); + + /* Wait until the bus is free */ + while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--); + if (timeout <= 0) { + printf("%s: The MII Bus is stuck!", __FUNCTION__); + return -ETIMEDOUT; + } + + return 0; +} + +static int init_phy(struct eth_device *dev) +{ + uec_private_t *uec; + uec_t *uec_regs; + struct uec_mii_info *mii_info; + struct phy_info *curphy; + int err; + + uec = (uec_private_t *)dev->priv; + uec_regs = uec->uec_regs; + + uec->oldlink = 0; + uec->oldspeed = 0; + uec->oldduplex = -1; + + mii_info = malloc(sizeof(*mii_info)); + if (!mii_info) { + printf("%s: Could not allocate mii_info", dev->name); + return -ENOMEM; + } + memset(mii_info, 0, sizeof(*mii_info)); + + mii_info->speed = SPEED_1000; + mii_info->duplex = DUPLEX_FULL; + mii_info->pause = 0; + mii_info->link = 1; + + mii_info->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + mii_info->autoneg = 1; + mii_info->mii_id = uec->uec_info->phy_address; + mii_info->dev = dev; + + mii_info->mdio_read = &read_phy_reg; + mii_info->mdio_write = &write_phy_reg; + + uec->mii_info = mii_info; + + if (init_mii_management_configuration(uec_regs)) { + printf("%s: The MII Bus is stuck!", dev->name); + err = -1; + goto bus_fail; + } + + /* get info for this PHY */ + curphy = get_phy_info(uec->mii_info); + if (!curphy) { + printf("%s: No PHY found", dev->name); + err = -1; + goto no_phy; + } + + mii_info->phyinfo = curphy; + + /* Run the commands which initialize the PHY */ + if (curphy->init) { + err = curphy->init(uec->mii_info); + if (err) + goto phy_init_fail; + } + + return 0; + +phy_init_fail: +no_phy: +bus_fail: + free(mii_info); + return err; +} + +static void adjust_link(struct eth_device *dev) +{ + uec_private_t *uec = (uec_private_t *)dev->priv; + uec_t *uec_regs; + struct uec_mii_info *mii_info = uec->mii_info; + + extern void change_phy_interface_mode(struct eth_device *dev, + enet_interface_e mode); + uec_regs = uec->uec_regs; + + if (mii_info->link) { + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (mii_info->duplex != uec->oldduplex) { + if (!(mii_info->duplex)) { + uec_set_mac_duplex(uec, DUPLEX_HALF); + printf("%s: Half Duplex\n", dev->name); + } else { + uec_set_mac_duplex(uec, DUPLEX_FULL); + printf("%s: Full Duplex\n", dev->name); + } + uec->oldduplex = mii_info->duplex; + } + + if (mii_info->speed != uec->oldspeed) { + switch (mii_info->speed) { + case 1000: + break; + case 100: + printf ("switching to rgmii 100\n"); + /* change phy to rgmii 100 */ + change_phy_interface_mode(dev, + ENET_100_RGMII); + /* change the MAC interface mode */ + uec_set_mac_if_mode(uec,ENET_100_RGMII); + break; + case 10: + printf ("switching to rgmii 10\n"); + /* change phy to rgmii 10 */ + change_phy_interface_mode(dev, + ENET_10_RGMII); + /* change the MAC interface mode */ + uec_set_mac_if_mode(uec,ENET_10_RGMII); + break; + default: + printf("%s: Ack,Speed(%d)is illegal\n", + dev->name, mii_info->speed); + break; + } + + printf("%s: Speed %dBT\n", dev->name, mii_info->speed); + uec->oldspeed = mii_info->speed; + } + + if (!uec->oldlink) { + printf("%s: Link is up\n", dev->name); + uec->oldlink = 1; + } + + } else { /* if (mii_info->link) */ + if (uec->oldlink) { + printf("%s: Link is down\n", dev->name); + uec->oldlink = 0; + uec->oldspeed = 0; + uec->oldduplex = -1; + } + } +} + +static void phy_change(struct eth_device *dev) +{ + uec_private_t *uec = (uec_private_t *)dev->priv; + uec_t *uec_regs; + int result = 0; + + uec_regs = uec->uec_regs; + + /* Delay 5s to give the PHY a chance to change the register state */ + udelay(5000000); + + /* Update the link, speed, duplex */ + result = uec->mii_info->phyinfo->read_status(uec->mii_info); + + /* Adjust the interface according to speed */ + if ((0 == result) || (uec->mii_info->link == 0)) { + adjust_link(dev); + } +} + +static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr) +{ + uec_t *uec_regs; + u32 mac_addr1; + u32 mac_addr2; + + if (!uec) { + printf("%s: uec not initial\n", __FUNCTION__); + return -EINVAL; + } + + uec_regs = uec->uec_regs; + + /* if a station address of 0x12345678ABCD, perform a write to + MACSTNADDR1 of 0xCDAB7856, + MACSTNADDR2 of 0x34120000 */ + + mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \ + (mac_addr[3] << 8) | (mac_addr[2]); + out_be32(&uec_regs->macstnaddr1, mac_addr1); + + mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000; + out_be32(&uec_regs->macstnaddr2, mac_addr2); + + return 0; +} + +static int uec_convert_threads_num(uec_num_of_threads_e threads_num, + int *threads_num_ret) +{ + int num_threads_numerica; + + switch (threads_num) { + case UEC_NUM_OF_THREADS_1: + num_threads_numerica = 1; + break; + case UEC_NUM_OF_THREADS_2: + num_threads_numerica = 2; + break; + case UEC_NUM_OF_THREADS_4: + num_threads_numerica = 4; + break; + case UEC_NUM_OF_THREADS_6: + num_threads_numerica = 6; + break; + case UEC_NUM_OF_THREADS_8: + num_threads_numerica = 8; + break; + default: + printf("%s: Bad number of threads value.", + __FUNCTION__); + return -EINVAL; + } + + *threads_num_ret = num_threads_numerica; + + return 0; +} + +static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx) +{ + uec_info_t *uec_info; + u32 end_bd; + u8 bmrx = 0; + int i; + + uec_info = uec->uec_info; + + /* Alloc global Tx parameter RAM page */ + uec->tx_glbl_pram_offset = qe_muram_alloc( + sizeof(uec_tx_global_pram_t), + UEC_TX_GLOBAL_PRAM_ALIGNMENT); + uec->p_tx_glbl_pram = (uec_tx_global_pram_t *) + qe_muram_addr(uec->tx_glbl_pram_offset); + + /* Zero the global Tx prameter RAM */ + memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t)); + + /* Init global Tx parameter RAM */ + + /* TEMODER, RMON statistics disable, one Tx queue */ + out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); + + /* SQPTR */ + uec->send_q_mem_reg_offset = qe_muram_alloc( + sizeof(uec_send_queue_qd_t), + UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); + uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *) + qe_muram_addr(uec->send_q_mem_reg_offset); + out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); + + /* Setup the table with TxBDs ring */ + end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) + * SIZEOFBD; + out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, + (u32)(uec->p_tx_bd_ring)); + out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, + end_bd); + + /* Scheduler Base Pointer, we have only one Tx queue, no need it */ + out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); + + /* TxRMON Base Pointer, TxRMON disable, we don't need it */ + out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); + + /* TSTATE, global snooping, big endian, the CSB bus selected */ + bmrx = BMR_INIT_VALUE; + out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); + + /* IPH_Offset */ + for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) { + out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); + } + + /* VTAG table */ + for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) { + out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); + } + + /* TQPTR */ + uec->thread_dat_tx_offset = qe_muram_alloc( + num_threads_tx * sizeof(uec_thread_data_tx_t) + + 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT); + + uec->p_thread_data_tx = (uec_thread_data_tx_t *) + qe_muram_addr(uec->thread_dat_tx_offset); + out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); +} + +static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx) +{ + u8 bmrx = 0; + int i; + uec_82xx_address_filtering_pram_t *p_af_pram; + + /* Allocate global Rx parameter RAM page */ + uec->rx_glbl_pram_offset = qe_muram_alloc( + sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT); + uec->p_rx_glbl_pram = (uec_rx_global_pram_t *) + qe_muram_addr(uec->rx_glbl_pram_offset); + + /* Zero Global Rx parameter RAM */ + memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t)); + + /* Init global Rx parameter RAM */ + /* REMODER, Extended feature mode disable, VLAN disable, + LossLess flow control disable, Receive firmware statisic disable, + Extended address parsing mode disable, One Rx queues, + Dynamic maximum/minimum frame length disable, IP checksum check + disable, IP address alignment disable + */ + out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); + + /* RQPTR */ + uec->thread_dat_rx_offset = qe_muram_alloc( + num_threads_rx * sizeof(uec_thread_data_rx_t), + UEC_THREAD_DATA_ALIGNMENT); + uec->p_thread_data_rx = (uec_thread_data_rx_t *) + qe_muram_addr(uec->thread_dat_rx_offset); + out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); + + /* Type_or_Len */ + out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); + + /* RxRMON base pointer, we don't need it */ + out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); + + /* IntCoalescingPTR, we don't need it, no interrupt */ + out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); + + /* RSTATE, global snooping, big endian, the CSB bus selected */ + bmrx = BMR_INIT_VALUE; + out_8(&uec->p_rx_glbl_pram->rstate, bmrx); + + /* MRBLR */ + out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); + + /* RBDQPTR */ + uec->rx_bd_qs_tbl_offset = qe_muram_alloc( + sizeof(uec_rx_bd_queues_entry_t) + \ + sizeof(uec_rx_prefetched_bds_t), + UEC_RX_BD_QUEUES_ALIGNMENT); + uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *) + qe_muram_addr(uec->rx_bd_qs_tbl_offset); + + /* Zero it */ + memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \ + sizeof(uec_rx_prefetched_bds_t)); + out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); + out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, + (u32)uec->p_rx_bd_ring); + + /* MFLR */ + out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); + /* MINFLR */ + out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); + /* MAXD1 */ + out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); + /* MAXD2 */ + out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); + /* ECAM_PTR */ + out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); + /* L2QT */ + out_be32(&uec->p_rx_glbl_pram->l2qt, 0); + /* L3QT */ + for (i = 0; i < 8; i++) { + out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); + } + + /* VLAN_TYPE */ + out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); + /* TCI */ + out_be16(&uec->p_rx_glbl_pram->vlantci, 0); + + /* Clear PQ2 style address filtering hash table */ + p_af_pram = (uec_82xx_address_filtering_pram_t *) \ + uec->p_rx_glbl_pram->addressfiltering; + + p_af_pram->iaddr_h = 0; + p_af_pram->iaddr_l = 0; + p_af_pram->gaddr_h = 0; + p_af_pram->gaddr_l = 0; +} + +static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec, + int thread_tx, int thread_rx) +{ + uec_init_cmd_pram_t *p_init_enet_param; + u32 init_enet_param_offset; + uec_info_t *uec_info; + int i; + int snum; + u32 init_enet_offset; + u32 entry_val; + u32 command; + u32 cecr_subblock; + + uec_info = uec->uec_info; + + /* Allocate init enet command parameter */ + uec->init_enet_param_offset = qe_muram_alloc( + sizeof(uec_init_cmd_pram_t), 4); + init_enet_param_offset = uec->init_enet_param_offset; + uec->p_init_enet_param = (uec_init_cmd_pram_t *) + qe_muram_addr(uec->init_enet_param_offset); + + /* Zero init enet command struct */ + memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t)); + + /* Init the command struct */ + p_init_enet_param = uec->p_init_enet_param; + p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; + p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; + p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; + p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; + p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; + p_init_enet_param->largestexternallookupkeysize = 0; + + p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) + << ENET_INIT_PARAM_RGF_SHIFT; + p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) + << ENET_INIT_PARAM_TGF_SHIFT; + + /* Init Rx global parameter pointer */ + p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | + (u32)uec_info->riscRx; + + /* Init Rx threads */ + for (i = 0; i < (thread_rx + 1); i++) { + if ((snum = qe_get_snum()) < 0) { + printf("%s can not get snum\n", __FUNCTION__); + return -ENOMEM; + } + + if (i==0) { + init_enet_offset = 0; + } else { + init_enet_offset = qe_muram_alloc( + sizeof(uec_thread_rx_pram_t), + UEC_THREAD_RX_PRAM_ALIGNMENT); + } + + entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | + init_enet_offset | (u32)uec_info->riscRx; + p_init_enet_param->rxthread[i] = entry_val; + } + + /* Init Tx global parameter pointer */ + p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | + (u32)uec_info->riscTx; + + /* Init Tx threads */ + for (i = 0; i < thread_tx; i++) { + if ((snum = qe_get_snum()) < 0) { + printf("%s can not get snum\n", __FUNCTION__); + return -ENOMEM; + } + + init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t), + UEC_THREAD_TX_PRAM_ALIGNMENT); + + entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | + init_enet_offset | (u32)uec_info->riscTx; + p_init_enet_param->txthread[i] = entry_val; + } + + __asm__ __volatile__("sync"); + + /* Issue QE command */ + command = QE_INIT_TX_RX; + cecr_subblock = ucc_fast_get_qe_cr_subblock( + uec->uec_info->uf_info.ucc_num); + qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + init_enet_param_offset); + + return 0; +} + +static int uec_startup(uec_private_t *uec) +{ + uec_info_t *uec_info; + ucc_fast_info_t *uf_info; + ucc_fast_private_t *uccf; + ucc_fast_t *uf_regs; + uec_t *uec_regs; + int num_threads_tx; + int num_threads_rx; + u32 utbipar; + enet_interface_e enet_interface; + u32 length; + u32 align; + qe_bd_t *bd; + u8 *buf; + int i; + + if (!uec || !uec->uec_info) { + printf("%s: uec or uec_info not initial\n", __FUNCTION__); + return -EINVAL; + } + + uec_info = uec->uec_info; + uf_info = &(uec_info->uf_info); + + /* Check if Rx BD ring len is illegal */ + if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \ + (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) { + printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", + __FUNCTION__); + return -EINVAL; + } + + /* Check if Tx BD ring len is illegal */ + if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { + printf("%s: Tx BD ring length must not be smaller than 2.\n", + __FUNCTION__); + return -EINVAL; + } + + /* Check if MRBLR is illegal */ + if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { + printf("%s: max rx buffer length must be mutliple of 128.\n", + __FUNCTION__); + return -EINVAL; + } + + /* Both Rx and Tx are stopped */ + uec->grace_stopped_rx = 1; + uec->grace_stopped_tx = 1; + + /* Init UCC fast */ + if (ucc_fast_init(uf_info, &uccf)) { + printf("%s: failed to init ucc fast\n", __FUNCTION__); + return -ENOMEM; + } + + /* Save uccf */ + uec->uccf = uccf; + + /* Convert the Tx threads number */ + if (uec_convert_threads_num(uec_info->num_threads_tx, + &num_threads_tx)) { + return -EINVAL; + } + + /* Convert the Rx threads number */ + if (uec_convert_threads_num(uec_info->num_threads_rx, + &num_threads_rx)) { + return -EINVAL; + } + + uf_regs = uccf->uf_regs; + + /* UEC register is following UCC fast registers */ + uec_regs = (uec_t *)(&uf_regs->ucc_eth); + + /* Save the UEC register pointer to UEC private struct */ + uec->uec_regs = uec_regs; + + /* Init UPSMR, enable hardware statistics (UCC) */ + out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); + + /* Init MACCFG1, flow control disable, disable Tx and Rx */ + out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); + + /* Init MACCFG2, length check, MAC PAD and CRC enable */ + out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); + + /* Setup MAC interface mode */ + uec_set_mac_if_mode(uec, uec_info->enet_interface); + + /* Setup MII master clock source */ + qe_set_mii_clk_src(uec_info->uf_info.ucc_num); + + /* Setup UTBIPAR */ + utbipar = in_be32(&uec_regs->utbipar); + utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; + enet_interface = uec->uec_info->enet_interface; + if (enet_interface == ENET_1000_TBI || + enet_interface == ENET_1000_RTBI) { + utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num) + << UTBIPAR_PHY_ADDRESS_SHIFT; + } else { + utbipar |= (0x10 + uec_info->uf_info.ucc_num) + << UTBIPAR_PHY_ADDRESS_SHIFT; + } + + out_be32(&uec_regs->utbipar, utbipar); + + /* Allocate Tx BDs */ + length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / + UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * + UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + if ((uec_info->tx_bd_ring_len * SIZEOFBD) % + UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) { + length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + } + + align = UEC_TX_BD_RING_ALIGNMENT; + uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); + if (uec->tx_bd_ring_offset != 0) { + uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) + & ~(align - 1)); + } + + /* Zero all of Tx BDs */ + memset((void *)(uec->tx_bd_ring_offset), 0, length + align); + + /* Allocate Rx BDs */ + length = uec_info->rx_bd_ring_len * SIZEOFBD; + align = UEC_RX_BD_RING_ALIGNMENT; + uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); + if (uec->rx_bd_ring_offset != 0) { + uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) + & ~(align - 1)); + } + + /* Zero all of Rx BDs */ + memset((void *)(uec->rx_bd_ring_offset), 0, length + align); + + /* Allocate Rx buffer */ + length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; + align = UEC_RX_DATA_BUF_ALIGNMENT; + uec->rx_buf_offset = (u32)malloc(length + align); + if (uec->rx_buf_offset != 0) { + uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) + & ~(align - 1)); + } + + /* Zero all of the Rx buffer */ + memset((void *)(uec->rx_buf_offset), 0, length + align); + + /* Init TxBD ring */ + bd = (qe_bd_t *)uec->p_tx_bd_ring; + uec->txBd = bd; + + for (i = 0; i < uec_info->tx_bd_ring_len; i++) { + BD_DATA_CLEAR(bd); + BD_STATUS_SET(bd, 0); + BD_LENGTH_SET(bd, 0); + bd ++; + } + BD_STATUS_SET((--bd), TxBD_WRAP); + + /* Init RxBD ring */ + bd = (qe_bd_t *)uec->p_rx_bd_ring; + uec->rxBd = bd; + buf = uec->p_rx_buf; + for (i = 0; i < uec_info->rx_bd_ring_len; i++) { + BD_DATA_SET(bd, buf); + BD_LENGTH_SET(bd, 0); + BD_STATUS_SET(bd, RxBD_EMPTY); + buf += MAX_RXBUF_LEN; + bd ++; + } + BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY); + + /* Init global Tx parameter RAM */ + uec_init_tx_parameter(uec, num_threads_tx); + + /* Init global Rx parameter RAM */ + uec_init_rx_parameter(uec, num_threads_rx); + + /* Init ethernet Tx and Rx parameter command */ + if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, + num_threads_rx)) { + printf("%s issue init enet cmd failed\n", __FUNCTION__); + return -ENOMEM; + } + + return 0; +} + +static int uec_init(struct eth_device* dev, bd_t *bd) +{ + uec_private_t *uec; + int err; + + uec = (uec_private_t *)dev->priv; + + if (uec->the_first_run == 0) { + /* Set up the MAC address */ + if (dev->enetaddr[0] & 0x01) { + printf("%s: MacAddress is multcast address\n", + __FUNCTION__); + return -EINVAL; + } + uec_set_mac_address(uec, dev->enetaddr); + uec->the_first_run = 1; + } + + err = uec_open(uec, COMM_DIR_RX_AND_TX); + if (err) { + printf("%s: cannot enable UEC device\n", dev->name); + return err; + } + + return 0; +} + +static void uec_halt(struct eth_device* dev) +{ + uec_private_t *uec = (uec_private_t *)dev->priv; + uec_stop(uec, COMM_DIR_RX_AND_TX); +} + +static int uec_send(struct eth_device* dev, volatile void *buf, int len) +{ + uec_private_t *uec; + ucc_fast_private_t *uccf; + volatile qe_bd_t *bd; + volatile u16 status; + int i; + int result = 0; + + uec = (uec_private_t *)dev->priv; + uccf = uec->uccf; + bd = uec->txBd; + + /* Find an empty TxBD */ + for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) { + if (i > 0x100000) { + printf("%s: tx buffer not ready\n", dev->name); + return result; + } + } + + /* Init TxBD */ + BD_DATA_SET(bd, buf); + BD_LENGTH_SET(bd, len); + status = BD_STATUS(bd); + status &= BD_WRAP; + status |= (TxBD_READY | TxBD_LAST); + BD_STATUS_SET(bd, status); + + /* Tell UCC to transmit the buffer */ + ucc_fast_transmit_on_demand(uccf); + + /* Wait for buffer to be transmitted */ + status = BD_STATUS(bd); + for (i = 0; status & TxBD_READY; i++) { + if (i > 0x100000) { + printf("%s: tx error\n", dev->name); + return result; + } + status = BD_STATUS(bd); + } + + /* Ok, the buffer be transimitted */ + BD_ADVANCE(bd, status, uec->p_tx_bd_ring); + uec->txBd = bd; + result = 1; + + return result; +} + +static int uec_recv(struct eth_device* dev) +{ + uec_private_t *uec = dev->priv; + volatile qe_bd_t *bd; + volatile u16 status; + u16 len; + u8 *data; + + bd = uec->rxBd; + status = BD_STATUS(bd); + + while (!(status & RxBD_EMPTY)) { + if (!(status & RxBD_ERROR)) { + data = BD_DATA(bd); + len = BD_LENGTH(bd); + NetReceive(data, len); + } else { + printf("%s: Rx error\n", dev->name); + } + status &= BD_CLEAN; + BD_LENGTH_SET(bd, 0); + BD_STATUS_SET(bd, status | RxBD_EMPTY); + BD_ADVANCE(bd, status, uec->p_rx_bd_ring); + status = BD_STATUS(bd); + } + uec->rxBd = bd; + + return 1; +} + +int uec_initialize(int index) +{ + struct eth_device *dev; + int i; + uec_private_t *uec; + uec_info_t *uec_info; + int err; + + dev = (struct eth_device *)malloc(sizeof(struct eth_device)); + if (!dev) + return 0; + memset(dev, 0, sizeof(struct eth_device)); + + /* Allocate the UEC private struct */ + uec = (uec_private_t *)malloc(sizeof(uec_private_t)); + if (!uec) { + return -ENOMEM; + } + memset(uec, 0, sizeof(uec_private_t)); + + /* Init UEC private struct, they come from board.h */ + if (index == 0) { +#ifdef CONFIG_UEC_ETH1 + uec_info = ð1_uec_info; +#endif + } else if (index == 1) { +#ifdef CONFIG_UEC_ETH2 + uec_info = ð2_uec_info; +#endif + } else { + printf("%s: index is illegal.\n", __FUNCTION__); + return -EINVAL; + } + + uec->uec_info = uec_info; + + sprintf(dev->name, "FSL UEC%d", index); + dev->iobase = 0; + dev->priv = (void *)uec; + dev->init = uec_init; + dev->halt = uec_halt; + dev->send = uec_send; + dev->recv = uec_recv; + + /* Clear the ethnet address */ + for (i = 0; i < 6; i++) + dev->enetaddr[i] = 0; + + eth_register(dev); + + err = uec_startup(uec); + if (err) { + printf("%s: Cannot configure net device, aborting.",dev->name); + return err; + } + + err = init_phy(dev); + if (err) { + printf("%s: Cannot initialize PHY, aborting.\n", dev->name); + return err; + } + + phy_change(dev); + + return 1; +} +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h new file mode 100644 index 0000000000..04950264b8 --- /dev/null +++ b/drivers/qe/uec.h @@ -0,0 +1,716 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __UEC_H__ +#define __UEC_H__ + +#define MAX_TX_THREADS 8 +#define MAX_RX_THREADS 8 +#define MAX_TX_QUEUES 8 +#define MAX_RX_QUEUES 8 +#define MAX_PREFETCHED_BDS 4 +#define MAX_IPH_OFFSET_ENTRY 8 +#define MAX_ENET_INIT_PARAM_ENTRIES_RX 9 +#define MAX_ENET_INIT_PARAM_ENTRIES_TX 8 + +/* UEC UPSMR (Protocol Specific Mode Register) + */ +#define UPSMR_ECM 0x04000000 /* Enable CAM Miss */ +#define UPSMR_HSE 0x02000000 /* Hardware Statistics Enable */ +#define UPSMR_PRO 0x00400000 /* Promiscuous */ +#define UPSMR_CAP 0x00200000 /* CAM polarity */ +#define UPSMR_RSH 0x00100000 /* Receive Short Frames */ +#define UPSMR_RPM 0x00080000 /* Reduced Pin Mode interfaces */ +#define UPSMR_R10M 0x00040000 /* RGMII/RMII 10 Mode */ +#define UPSMR_RLPB 0x00020000 /* RMII Loopback Mode */ +#define UPSMR_TBIM 0x00010000 /* Ten-bit Interface Mode */ +#define UPSMR_RMM 0x00001000 /* RMII/RGMII Mode */ +#define UPSMR_CAM 0x00000400 /* CAM Address Matching */ +#define UPSMR_BRO 0x00000200 /* Broadcast Address */ +#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */ + +#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1) + +/* UEC MACCFG1 (MAC Configuration 1 Register) + */ +#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ +#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control Tx */ +#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Enable Rx Sync */ +#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */ +#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Enable Tx Sync */ +#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */ + +#define MACCFG1_INIT_VALUE (0) + +/* UEC MACCFG2 (MAC Configuration 2 Register) + */ +#define MACCFG2_PREL 0x00007000 +#define MACCFG2_PREL_SHIFT (31 - 19) +#define MACCFG2_PREL_MASK 0x0000f000 +#define MACCFG2_SRP 0x00000080 +#define MACCFG2_STP 0x00000040 +#define MACCFG2_RESERVED_1 0x00000020 /* must be set */ +#define MACCFG2_LC 0x00000010 /* Length Check */ +#define MACCFG2_MPE 0x00000008 +#define MACCFG2_FDX 0x00000001 /* Full Duplex */ +#define MACCFG2_FDX_MASK 0x00000001 +#define MACCFG2_PAD_CRC 0x00000004 +#define MACCFG2_CRC_EN 0x00000002 +#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000 +#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002 +#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004 +#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100 +#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200 +#define MACCFG2_INTERFACE_MODE_MASK 0x00000300 + +#define MACCFG2_INIT_VALUE (MACCFG2_PREL | MACCFG2_RESERVED_1 | \ + MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX) + +/* UEC Event Register +*/ +#define UCCE_MPD 0x80000000 +#define UCCE_SCAR 0x40000000 +#define UCCE_GRA 0x20000000 +#define UCCE_CBPR 0x10000000 +#define UCCE_BSY 0x08000000 +#define UCCE_RXC 0x04000000 +#define UCCE_TXC 0x02000000 +#define UCCE_TXE 0x01000000 +#define UCCE_TXB7 0x00800000 +#define UCCE_TXB6 0x00400000 +#define UCCE_TXB5 0x00200000 +#define UCCE_TXB4 0x00100000 +#define UCCE_TXB3 0x00080000 +#define UCCE_TXB2 0x00040000 +#define UCCE_TXB1 0x00020000 +#define UCCE_TXB0 0x00010000 +#define UCCE_RXB7 0x00008000 +#define UCCE_RXB6 0x00004000 +#define UCCE_RXB5 0x00002000 +#define UCCE_RXB4 0x00001000 +#define UCCE_RXB3 0x00000800 +#define UCCE_RXB2 0x00000400 +#define UCCE_RXB1 0x00000200 +#define UCCE_RXB0 0x00000100 +#define UCCE_RXF7 0x00000080 +#define UCCE_RXF6 0x00000040 +#define UCCE_RXF5 0x00000020 +#define UCCE_RXF4 0x00000010 +#define UCCE_RXF3 0x00000008 +#define UCCE_RXF2 0x00000004 +#define UCCE_RXF1 0x00000002 +#define UCCE_RXF0 0x00000001 + +#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \ + UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0) +#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \ + UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0) +#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \ + UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0) +#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY | \ + UCCE_RXC | UCCE_TXC | UCCE_TXE) + +/* UEC TEMODR Register +*/ +#define TEMODER_SCHEDULER_ENABLE 0x2000 +#define TEMODER_IP_CHECKSUM_GENERATE 0x0400 +#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200 +#define TEMODER_RMON_STATISTICS 0x0100 +#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15) + +#define TEMODER_INIT_VALUE 0xc000 + +/* UEC REMODR Register +*/ +#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000 +#define REMODER_RX_EXTENDED_FEATURES 0x80000000 +#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 ) +#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10) +#define REMODER_RX_QOS_MODE_SHIFT (31-15) +#define REMODER_RMON_STATISTICS 0x00001000 +#define REMODER_RX_EXTENDED_FILTERING 0x00000800 +#define REMODER_NUM_OF_QUEUES_SHIFT (31-23) +#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008 +#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004 +#define REMODER_IP_CHECKSUM_CHECK 0x00000002 +#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001 + +#define REMODER_INIT_VALUE 0 + +/* BMRx - Bus Mode Register */ +#define BMR_GLB 0x20 +#define BMR_BO_BE 0x10 +#define BMR_DTB_SECONDARY_BUS 0x02 +#define BMR_BDB_SECONDARY_BUS 0x01 + +#define BMR_SHIFT 24 +#define BMR_INIT_VALUE (BMR_GLB | BMR_BO_BE) + +/* UEC UCCS (Ethernet Status Register) + */ +#define UCCS_BPR 0x02 +#define UCCS_PAU 0x02 +#define UCCS_MPD 0x01 + +/* UEC MIIMCFG (MII Management Configuration Register) + */ +#define MIIMCFG_RESET_MANAGEMENT 0x80000000 +#define MIIMCFG_NO_PREAMBLE 0x00000010 +#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31) +#define MIIMCFG_CLOCK_DIVIDE_MASK 0x0000000f +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006 +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007 + +#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE \ + MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 + +/* UEC MIIMCOM (MII Management Command Register) + */ +#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */ +#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */ + +/* UEC MIIMADD (MII Management Address Register) + */ +#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23) +#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31) + +/* UEC MIIMCON (MII Management Control Register) + */ +#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31) +#define MIIMCON_PHY_STATUS_SHIFT (31 - 31) + +/* UEC MIIMIND (MII Management Indicator Register) + */ +#define MIIMIND_NOT_VALID 0x00000004 +#define MIIMIND_SCAN 0x00000002 +#define MIIMIND_BUSY 0x00000001 + +/* UEC UTBIPAR (Ten Bit Interface Physical Address Register) + */ +#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31) +#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f + +/* UEC UESCR (Ethernet Statistics Control Register) + */ +#define UESCR_AUTOZ 0x8000 +#define UESCR_CLRCNT 0x4000 +#define UESCR_MAXCOV_SHIFT (15 - 7) +#define UESCR_SCOV_SHIFT (15 - 15) + +/****** Tx data struct collection ******/ +/* Tx thread data, each Tx thread has one this struct. +*/ +typedef struct uec_thread_data_tx { + u8 res0[136]; +} __attribute__ ((packed)) uec_thread_data_tx_t; + +/* Tx thread parameter, each Tx thread has one this struct. +*/ +typedef struct uec_thread_tx_pram { + u8 res0[64]; +} __attribute__ ((packed)) uec_thread_tx_pram_t; + +/* Send queue queue-descriptor, each Tx queue has one this QD +*/ +typedef struct uec_send_queue_qd { + u32 bd_ring_base; /* pointer to BD ring base address */ + u8 res0[0x8]; + u32 last_bd_completed_address; /* last entry in BD ring */ + u8 res1[0x30]; +} __attribute__ ((packed)) uec_send_queue_qd_t; + +/* Send queue memory region */ +typedef struct uec_send_queue_mem_region { + uec_send_queue_qd_t sqqd[MAX_TX_QUEUES]; +} __attribute__ ((packed)) uec_send_queue_mem_region_t; + +/* Scheduler struct +*/ +typedef struct uec_scheduler { + u16 cpucount0; /* CPU packet counter */ + u16 cpucount1; /* CPU packet counter */ + u16 cecount0; /* QE packet counter */ + u16 cecount1; /* QE packet counter */ + u16 cpucount2; /* CPU packet counter */ + u16 cpucount3; /* CPU packet counter */ + u16 cecount2; /* QE packet counter */ + u16 cecount3; /* QE packet counter */ + u16 cpucount4; /* CPU packet counter */ + u16 cpucount5; /* CPU packet counter */ + u16 cecount4; /* QE packet counter */ + u16 cecount5; /* QE packet counter */ + u16 cpucount6; /* CPU packet counter */ + u16 cpucount7; /* CPU packet counter */ + u16 cecount6; /* QE packet counter */ + u16 cecount7; /* QE packet counter */ + u32 weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */ + u32 rtsrshadow; /* temporary variable handled by QE */ + u32 time; /* temporary variable handled by QE */ + u32 ttl; /* temporary variable handled by QE */ + u32 mblinterval; /* max burst length interval */ + u16 nortsrbytetime; /* normalized value of byte time in tsr units */ + u8 fracsiz; + u8 res0[1]; + u8 strictpriorityq; /* Strict Priority Mask register */ + u8 txasap; /* Transmit ASAP register */ + u8 extrabw; /* Extra BandWidth register */ + u8 oldwfqmask; /* temporary variable handled by QE */ + u8 weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */ + u32 minw; /* temporary variable handled by QE */ + u8 res1[0x70-0x64]; +} __attribute__ ((packed)) uec_scheduler_t; + +/* Tx firmware counters +*/ +typedef struct uec_tx_firmware_statistics_pram { + u32 sicoltx; /* single collision */ + u32 mulcoltx; /* multiple collision */ + u32 latecoltxfr; /* late collision */ + u32 frabortduecol; /* frames aborted due to tx collision */ + u32 frlostinmactxer; /* frames lost due to internal MAC error tx */ + u32 carriersenseertx; /* carrier sense error */ + u32 frtxok; /* frames transmitted OK */ + u32 txfrexcessivedefer; + u32 txpkts256; /* total packets(including bad) 256~511 B */ + u32 txpkts512; /* total packets(including bad) 512~1023B */ + u32 txpkts1024; /* total packets(including bad) 1024~1518B */ + u32 txpktsjumbo; /* total packets(including bad) >1024 */ +} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t; + +/* Tx global parameter table +*/ +typedef struct uec_tx_global_pram { + u16 temoder; + u8 res0[0x38-0x02]; + u32 sqptr; + u32 schedulerbasepointer; + u32 txrmonbaseptr; + u32 tstate; + u8 iphoffset[MAX_IPH_OFFSET_ENTRY]; + u32 vtagtable[0x8]; + u32 tqptr; + u8 res2[0x80-0x74]; +} __attribute__ ((packed)) uec_tx_global_pram_t; + + +/****** Rx data struct collection ******/ +/* Rx thread data, each Rx thread has one this struct. +*/ +typedef struct uec_thread_data_rx { + u8 res0[40]; +} __attribute__ ((packed)) uec_thread_data_rx_t; + +/* Rx thread parameter, each Rx thread has one this struct. +*/ +typedef struct uec_thread_rx_pram { + u8 res0[128]; +} __attribute__ ((packed)) uec_thread_rx_pram_t; + +/* Rx firmware counters +*/ +typedef struct uec_rx_firmware_statistics_pram { + u32 frrxfcser; /* frames with crc error */ + u32 fraligner; /* frames with alignment error */ + u32 inrangelenrxer; /* in range length error */ + u32 outrangelenrxer; /* out of range length error */ + u32 frtoolong; /* frame too long */ + u32 runt; /* runt */ + u32 verylongevent; /* very long event */ + u32 symbolerror; /* symbol error */ + u32 dropbsy; /* drop because of BD not ready */ + u8 res0[0x8]; + u32 mismatchdrop; /* drop because of MAC filtering */ + u32 underpkts; /* total frames less than 64 octets */ + u32 pkts256; /* total frames(including bad)256~511 B */ + u32 pkts512; /* total frames(including bad)512~1023 B */ + u32 pkts1024; /* total frames(including bad)1024~1518 B */ + u32 pktsjumbo; /* total frames(including bad) >1024 B */ + u32 frlossinmacer; + u32 pausefr; /* pause frames */ + u8 res1[0x4]; + u32 removevlan; + u32 replacevlan; + u32 insertvlan; +} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t; + +/* Rx interrupt coalescing entry, each Rx queue has one this entry. +*/ +typedef struct uec_rx_interrupt_coalescing_entry { + u32 maxvalue; + u32 counter; +} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t; + +typedef struct uec_rx_interrupt_coalescing_table { + uec_rx_interrupt_coalescing_entry_t entry[MAX_RX_QUEUES]; +} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t; + +/* RxBD queue entry, each Rx queue has one this entry. +*/ +typedef struct uec_rx_bd_queues_entry { + u32 bdbaseptr; /* BD base pointer */ + u32 bdptr; /* BD pointer */ + u32 externalbdbaseptr; /* external BD base pointer */ + u32 externalbdptr; /* external BD pointer */ +} __attribute__ ((packed)) uec_rx_bd_queues_entry_t; + +/* Rx global paramter table +*/ +typedef struct uec_rx_global_pram { + u32 remoder; /* ethernet mode reg. */ + u32 rqptr; /* base pointer to the Rx Queues */ + u32 res0[0x1]; + u8 res1[0x20-0xC]; + u16 typeorlen; + u8 res2[0x1]; + u8 rxgstpack; /* ack on GRACEFUL STOP RX command */ + u32 rxrmonbaseptr; /* Rx RMON statistics base */ + u8 res3[0x30-0x28]; + u32 intcoalescingptr; /* Interrupt coalescing table pointer */ + u8 res4[0x36-0x34]; + u8 rstate; + u8 res5[0x46-0x37]; + u16 mrblr; /* max receive buffer length reg. */ + u32 rbdqptr; /* RxBD parameter table description */ + u16 mflr; /* max frame length reg. */ + u16 minflr; /* min frame length reg. */ + u16 maxd1; /* max dma1 length reg. */ + u16 maxd2; /* max dma2 length reg. */ + u32 ecamptr; /* external CAM address */ + u32 l2qt; /* VLAN priority mapping table. */ + u32 l3qt[0x8]; /* IP priority mapping table. */ + u16 vlantype; /* vlan type */ + u16 vlantci; /* default vlan tci */ + u8 addressfiltering[64];/* address filtering data structure */ + u32 exfGlobalParam; /* extended filtering global parameters */ + u8 res6[0x100-0xC4]; /* Initialize to zero */ +} __attribute__ ((packed)) uec_rx_global_pram_t; + +#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01 + + +/****** UEC common ******/ +/* UCC statistics - hardware counters +*/ +typedef struct uec_hardware_statistics { + u32 tx64; + u32 tx127; + u32 tx255; + u32 rx64; + u32 rx127; + u32 rx255; + u32 txok; + u16 txcf; + u32 tmca; + u32 tbca; + u32 rxfok; + u32 rxbok; + u32 rbyt; + u32 rmca; + u32 rbca; +} __attribute__ ((packed)) uec_hardware_statistics_t; + +/* InitEnet command parameter +*/ +typedef struct uec_init_cmd_pram { + u8 resinit0; + u8 resinit1; + u8 resinit2; + u8 resinit3; + u16 resinit4; + u8 res1[0x1]; + u8 largestexternallookupkeysize; + u32 rgftgfrxglobal; + u32 rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */ + u8 res2[0x38 - 0x30]; + u32 txglobal; /* tx global */ + u32 txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */ + u8 res3[0x1]; +} __attribute__ ((packed)) uec_init_cmd_pram_t; + +#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4) +#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8) + +#define ENET_INIT_PARAM_RISC_MASK 0x0000003f +#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0 +#define ENET_INIT_PARAM_SNUM_MASK 0xff000000 +#define ENET_INIT_PARAM_SNUM_SHIFT 24 + +#define ENET_INIT_PARAM_MAGIC_RES_INIT0 0x06 +#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x30 +#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0xff +#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0x00 +#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x0400 + +/* structure representing 82xx Address Filtering Enet Address in PRAM +*/ +typedef struct uec_82xx_enet_address { + u8 res1[0x2]; + u16 h; /* address (MSB) */ + u16 m; /* address */ + u16 l; /* address (LSB) */ +} __attribute__ ((packed)) uec_82xx_enet_address_t; + +/* structure representing 82xx Address Filtering PRAM +*/ +typedef struct uec_82xx_address_filtering_pram { + u32 iaddr_h; /* individual address filter, high */ + u32 iaddr_l; /* individual address filter, low */ + u32 gaddr_h; /* group address filter, high */ + u32 gaddr_l; /* group address filter, low */ + uec_82xx_enet_address_t taddr; + uec_82xx_enet_address_t paddr[4]; + u8 res0[0x40-0x38]; +} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t; + +/* Buffer Descriptor +*/ +typedef struct buffer_descriptor { + u16 status; + u16 len; + u32 data; +} __attribute__ ((packed)) qe_bd_t, *p_bd_t; + +#define SIZEOFBD sizeof(qe_bd_t) + +/* Common BD flags +*/ +#define BD_WRAP 0x2000 +#define BD_INT 0x1000 +#define BD_LAST 0x0800 +#define BD_CLEAN 0x3000 + +/* TxBD status flags +*/ +#define TxBD_READY 0x8000 +#define TxBD_PADCRC 0x4000 +#define TxBD_WRAP BD_WRAP +#define TxBD_INT BD_INT +#define TxBD_LAST BD_LAST +#define TxBD_TXCRC 0x0400 +#define TxBD_DEF 0x0200 +#define TxBD_PP 0x0100 +#define TxBD_LC 0x0080 +#define TxBD_RL 0x0040 +#define TxBD_RC 0x003C +#define TxBD_UNDERRUN 0x0002 +#define TxBD_TRUNC 0x0001 + +#define TxBD_ERROR (TxBD_UNDERRUN | TxBD_TRUNC) + +/* RxBD status flags +*/ +#define RxBD_EMPTY 0x8000 +#define RxBD_OWNER 0x4000 +#define RxBD_WRAP BD_WRAP +#define RxBD_INT BD_INT +#define RxBD_LAST BD_LAST +#define RxBD_FIRST 0x0400 +#define RxBD_CMR 0x0200 +#define RxBD_MISS 0x0100 +#define RxBD_BCAST 0x0080 +#define RxBD_MCAST 0x0040 +#define RxBD_LG 0x0020 +#define RxBD_NO 0x0010 +#define RxBD_SHORT 0x0008 +#define RxBD_CRCERR 0x0004 +#define RxBD_OVERRUN 0x0002 +#define RxBD_IPCH 0x0001 + +#define RxBD_ERROR (RxBD_LG | RxBD_NO | RxBD_SHORT | \ + RxBD_CRCERR | RxBD_OVERRUN) + +/* BD access macros +*/ +#define BD_STATUS(_bd) (((p_bd_t)(_bd))->status) +#define BD_STATUS_SET(_bd, _val) (((p_bd_t)(_bd))->status = _val) +#define BD_LENGTH(_bd) (((p_bd_t)(_bd))->len) +#define BD_LENGTH_SET(_bd, _val) (((p_bd_t)(_bd))->len = _val) +#define BD_DATA_CLEAR(_bd) (((p_bd_t)(_bd))->data = 0) +#define BD_IS_DATA(_bd) (((p_bd_t)(_bd))->data) +#define BD_DATA(_bd) ((u8 *)(((p_bd_t)(_bd))->data)) +#define BD_DATA_SET(_bd, _data) (((p_bd_t)(_bd))->data = (u32)(_data)) +#define BD_ADVANCE(_bd,_status,_base) \ + (((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd)) + +/* Rx Prefetched BDs +*/ +typedef struct uec_rx_prefetched_bds { + qe_bd_t bd[MAX_PREFETCHED_BDS]; /* prefetched bd */ +} __attribute__ ((packed)) uec_rx_prefetched_bds_t; + +/* Alignments + */ +#define UEC_RX_GLOBAL_PRAM_ALIGNMENT 64 +#define UEC_TX_GLOBAL_PRAM_ALIGNMENT 64 +#define UEC_THREAD_RX_PRAM_ALIGNMENT 128 +#define UEC_THREAD_TX_PRAM_ALIGNMENT 64 +#define UEC_THREAD_DATA_ALIGNMENT 256 +#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32 +#define UEC_SCHEDULER_ALIGNMENT 4 +#define UEC_TX_STATISTICS_ALIGNMENT 4 +#define UEC_RX_STATISTICS_ALIGNMENT 4 +#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT 4 +#define UEC_RX_BD_QUEUES_ALIGNMENT 8 +#define UEC_RX_PREFETCHED_BDS_ALIGNMENT 128 +#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 +#define UEC_RX_BD_RING_ALIGNMENT 32 +#define UEC_TX_BD_RING_ALIGNMENT 32 +#define UEC_MRBLR_ALIGNMENT 128 +#define UEC_RX_BD_RING_SIZE_ALIGNMENT 4 +#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32 +#define UEC_RX_DATA_BUF_ALIGNMENT 64 + +#define UEC_VLAN_PRIORITY_MAX 8 +#define UEC_IP_PRIORITY_MAX 64 +#define UEC_TX_VTAG_TABLE_ENTRY_MAX 8 +#define UEC_RX_BD_RING_SIZE_MIN 8 +#define UEC_TX_BD_RING_SIZE_MIN 2 + +/* Ethernet speed +*/ +typedef enum enet_speed { + ENET_SPEED_10BT, /* 10 Base T */ + ENET_SPEED_100BT, /* 100 Base T */ + ENET_SPEED_1000BT /* 1000 Base T */ +} enet_speed_e; + +/* Ethernet Address Type. +*/ +typedef enum enet_addr_type { + ENET_ADDR_TYPE_INDIVIDUAL, + ENET_ADDR_TYPE_GROUP, + ENET_ADDR_TYPE_BROADCAST +} enet_addr_type_e; + +/* TBI / MII Set Register +*/ +typedef enum enet_tbi_mii_reg { + ENET_TBI_MII_CR = 0x00, + ENET_TBI_MII_SR = 0x01, + ENET_TBI_MII_ANA = 0x04, + ENET_TBI_MII_ANLPBPA = 0x05, + ENET_TBI_MII_ANEX = 0x06, + ENET_TBI_MII_ANNPT = 0x07, + ENET_TBI_MII_ANLPANP = 0x08, + ENET_TBI_MII_EXST = 0x0F, + ENET_TBI_MII_JD = 0x10, + ENET_TBI_MII_TBICON = 0x11 +} enet_tbi_mii_reg_e; + +/* UEC number of threads +*/ +typedef enum uec_num_of_threads { + UEC_NUM_OF_THREADS_1 = 0x1, /* 1 */ + UEC_NUM_OF_THREADS_2 = 0x2, /* 2 */ + UEC_NUM_OF_THREADS_4 = 0x0, /* 4 */ + UEC_NUM_OF_THREADS_6 = 0x3, /* 6 */ + UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */ +} uec_num_of_threads_e; + +/* UEC ethernet interface type +*/ +typedef enum enet_interface { + ENET_10_MII, + ENET_10_RMII, + ENET_10_RGMII, + ENET_100_MII, + ENET_100_RMII, + ENET_100_RGMII, + ENET_1000_GMII, + ENET_1000_RGMII, + ENET_1000_TBI, + ENET_1000_RTBI +} enet_interface_e; + +/* UEC initialization info struct +*/ +typedef struct uec_info { + ucc_fast_info_t uf_info; + uec_num_of_threads_e num_threads_tx; + uec_num_of_threads_e num_threads_rx; + qe_risc_allocation_e riscTx; + qe_risc_allocation_e riscRx; + u16 rx_bd_ring_len; + u16 tx_bd_ring_len; + u8 phy_address; + enet_interface_e enet_interface; +} uec_info_t; + +/* UEC driver initialized info +*/ +#define MAX_RXBUF_LEN 1536 +#define MAX_FRAME_LEN 1518 +#define MIN_FRAME_LEN 64 +#define MAX_DMA1_LEN 1520 +#define MAX_DMA2_LEN 1520 + +/* UEC driver private struct +*/ +typedef struct uec_private { + uec_info_t *uec_info; + ucc_fast_private_t *uccf; + struct eth_device *dev; + uec_t *uec_regs; + /* enet init command parameter */ + uec_init_cmd_pram_t *p_init_enet_param; + u32 init_enet_param_offset; + /* Rx and Tx paramter */ + uec_rx_global_pram_t *p_rx_glbl_pram; + u32 rx_glbl_pram_offset; + uec_tx_global_pram_t *p_tx_glbl_pram; + u32 tx_glbl_pram_offset; + uec_send_queue_mem_region_t *p_send_q_mem_reg; + u32 send_q_mem_reg_offset; + uec_thread_data_tx_t *p_thread_data_tx; + u32 thread_dat_tx_offset; + uec_thread_data_rx_t *p_thread_data_rx; + u32 thread_dat_rx_offset; + uec_rx_bd_queues_entry_t *p_rx_bd_qs_tbl; + u32 rx_bd_qs_tbl_offset; + /* BDs specific */ + u8 *p_tx_bd_ring; + u32 tx_bd_ring_offset; + u8 *p_rx_bd_ring; + u32 rx_bd_ring_offset; + u8 *p_rx_buf; + u32 rx_buf_offset; + volatile qe_bd_t *txBd; + volatile qe_bd_t *rxBd; + /* Status */ + int mac_tx_enabled; + int mac_rx_enabled; + int grace_stopped_tx; + int grace_stopped_rx; + int the_first_run; + /* PHY specific */ + struct uec_mii_info *mii_info; + int oldspeed; + int oldduplex; + int oldlink; +} uec_private_t; + +#endif /* __UEC_H__ */ diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c new file mode 100644 index 0000000000..fedf6361cb --- /dev/null +++ b/drivers/qe/uec_phy.c @@ -0,0 +1,604 @@ +/* + * Copyright (C) 2005 Freescale Semiconductor, Inc. + * + * Author: Shlomi Gridish + * + * Description: UCC GETH Driver -- PHY handling + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include "common.h" +#include "net.h" +#include "malloc.h" +#include "asm/errno.h" +#include "asm/immap_qe.h" +#include "asm/io.h" +#include "qe.h" +#include "uccf.h" +#include "uec.h" +#include "uec_phy.h" +#include "miiphy.h" + +#if defined(CONFIG_QE) + +#define UEC_VERBOSE_DEBUG +#define ugphy_printk(format, arg...) \ + printf(format "\n", ## arg) + +#define ugphy_dbg(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_err(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_info(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_warn(format, arg...) \ + ugphy_printk(format , ## arg) + +#ifdef UEC_VERBOSE_DEBUG +#define ugphy_vdbg ugphy_dbg +#else +#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) +#endif /* UEC_VERBOSE_DEBUG */ + +static void config_genmii_advert(struct uec_mii_info *mii_info); +static void genmii_setup_forced(struct uec_mii_info *mii_info); +static void genmii_restart_aneg(struct uec_mii_info *mii_info); +static int gbit_config_aneg(struct uec_mii_info *mii_info); +static int genmii_config_aneg(struct uec_mii_info *mii_info); +static int genmii_update_link(struct uec_mii_info *mii_info); +static int genmii_read_status(struct uec_mii_info *mii_info); +u16 phy_read(struct uec_mii_info *mii_info, u16 regnum); +void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val); + +/* Write value to the PHY for this device to the register at regnum, */ +/* waiting until the write is done before it returns. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value) +{ + uec_private_t *ugeth = (uec_private_t *)dev->priv; + uec_t *ug_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum; + u32 tmp_reg; + + ug_regs = ugeth->uec_regs; + + /* Stop the MII management read cycle */ + out_be32(&ug_regs->miimcom, 0); + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32(&ug_regs->miimadd, tmp_reg); + + /* Setting up the MII Mangement Control Register with the value */ + out_be32(&ug_regs->miimcon, (u32)value); + + /* Wait till MII management write is complete */ + while((in_be32(&ug_regs->miimind)) & MIIMIND_BUSY); + + udelay(100000); +} + +/* Reads from register regnum in the PHY for device dev, */ +/* returning the value. Clears miimcom first. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +int read_phy_reg(struct eth_device *dev, int mii_id, int regnum) +{ + uec_private_t *ugeth = (uec_private_t *)dev->priv; + uec_t *ug_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum; + u32 tmp_reg; + u16 value; + + ug_regs = ugeth->uec_regs; + + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg ; + out_be32(&ug_regs->miimadd, tmp_reg); + + /* Perform an MII management read cycle */ + out_be32(&ug_regs->miimcom, 0); + out_be32(&ug_regs->miimcom, MIIMCOM_READ_CYCLE); + + /* Wait till MII management write is complete */ + while((in_be32(&ug_regs->miimind)) & (MIIMIND_NOT_VALID | MIIMIND_BUSY)); + + udelay(100000); + + /* Read MII management status */ + value = (u16)in_be32(&ug_regs->miimstat); + if(value == 0xffff) + ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x", + mii_id, mii_reg, (u32) &(ug_regs->miimcfg)); + + return (value); +} + +void mii_clear_phy_interrupt(struct uec_mii_info *mii_info) +{ + if(mii_info->phyinfo->ack_interrupt) + mii_info->phyinfo->ack_interrupt(mii_info); +} + +void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts) +{ + mii_info->interrupts = interrupts; + if(mii_info->phyinfo->config_intr) + mii_info->phyinfo->config_intr(mii_info); +} + +/* Writes MII_ADVERTISE with the appropriate values, after + * sanitizing advertise to make sure only supported features + * are advertised + */ +static void config_genmii_advert(struct uec_mii_info *mii_info) +{ + u32 advertise; + u16 adv; + + /* Only allow advertising what this PHY supports */ + mii_info->advertising &= mii_info->phyinfo->features; + advertise = mii_info->advertising; + + /* Setup standard advertisement */ + adv = phy_read(mii_info, PHY_ANAR); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write(mii_info, PHY_ANAR, adv); +} + +static void genmii_setup_forced(struct uec_mii_info *mii_info) +{ + u16 ctrl; + u32 features = mii_info->phyinfo->features; + + ctrl = phy_read(mii_info, PHY_BMCR); + + ctrl &= ~(PHY_BMCR_DPLX|PHY_BMCR_100_MBPS| + PHY_BMCR_1000_MBPS|PHY_BMCR_AUTON); + ctrl |= PHY_BMCR_RESET; + + switch(mii_info->speed) { + case SPEED_1000: + if(features & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + ctrl |= PHY_BMCR_1000_MBPS; + break; + } + mii_info->speed = SPEED_100; + case SPEED_100: + if (features & (SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full)) { + ctrl |= PHY_BMCR_100_MBPS; + break; + } + mii_info->speed = SPEED_10; + case SPEED_10: + if (features & (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full)) + break; + default: /* Unsupported speed! */ + ugphy_err("%s: Bad speed!", mii_info->dev->name); + break; + } + + phy_write(mii_info, PHY_BMCR, ctrl); +} + +/* Enable and Restart Autonegotiation */ +static void genmii_restart_aneg(struct uec_mii_info *mii_info) +{ + u16 ctl; + + ctl = phy_read(mii_info, PHY_BMCR); + ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + phy_write(mii_info, PHY_BMCR, ctl); +} + +static int gbit_config_aneg(struct uec_mii_info *mii_info) +{ + u16 adv; + u32 advertise; + + if(mii_info->autoneg) { + /* Configure the ADVERTISE register */ + config_genmii_advert(mii_info); + advertise = mii_info->advertising; + + adv = phy_read(mii_info, MII_1000BASETCONTROL); + adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | + MII_1000BASETCONTROL_HALFDUPLEXCAP); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; + phy_write(mii_info, MII_1000BASETCONTROL, adv); + + /* Start/Restart aneg */ + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int marvell_config_aneg(struct uec_mii_info *mii_info) +{ + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET); + + phy_write(mii_info, 0x1d, 0x1f); + phy_write(mii_info, 0x1e, 0x200c); + phy_write(mii_info, 0x1d, 0x5); + phy_write(mii_info, 0x1e, 0); + phy_write(mii_info, 0x1e, 0x100); + + gbit_config_aneg(mii_info); + + return 0; +} + +static int genmii_config_aneg(struct uec_mii_info *mii_info) +{ + if (mii_info->autoneg) { + config_genmii_advert(mii_info); + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int genmii_update_link(struct uec_mii_info *mii_info) +{ + u16 status; + + /* Do a fake read */ + phy_read(mii_info, PHY_BMSR); + + /* Read link and autonegotiation status */ + status = phy_read(mii_info, PHY_BMSR); + if ((status & PHY_BMSR_LS) == 0) + mii_info->link = 0; + else + mii_info->link = 1; + + /* If we are autonegotiating, and not done, + * return an error */ + if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP)) + return -EAGAIN; + + return 0; +} + +static int genmii_read_status(struct uec_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + if (mii_info->autoneg) { + status = phy_read(mii_info, PHY_ANLPAR); + + if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + mii_info->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} + +static int marvell_read_status(struct uec_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); + + /* Get the duplexity */ + if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + /* Get the speed */ + speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; + switch(speed) { + case MII_M1011_PHY_SPEC_STATUS_1000: + mii_info->speed = SPEED_1000; + break; + case MII_M1011_PHY_SPEC_STATUS_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + mii_info->pause = 0; + } + + return 0; +} + +static int marvell_ack_interrupt(struct uec_mii_info *mii_info) +{ + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_M1011_IEVENT); + + return 0; +} + +static int marvell_config_intr(struct uec_mii_info *mii_info) +{ + if(mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + + return 0; +} + +static int dm9161_init(struct uec_mii_info *mii_info) +{ + /* Reset the PHY */ + phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) | + PHY_BMCR_RESET); + /* PHY and MAC connect*/ + phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) & + ~PHY_BMCR_ISO); +#ifdef CONFIG_RMII_MODE + phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT); +#else + phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); +#endif + config_genmii_advert(mii_info); + /* Start/restart aneg */ + genmii_config_aneg(mii_info); + /* Delay to wait the aneg compeleted */ + udelay(3000000); + + return 0; +} + +static int dm9161_config_aneg(struct uec_mii_info *mii_info) +{ + return 0; +} + +static int dm9161_read_status(struct uec_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there was an error*/ + err = genmii_update_link(mii_info); + if (err) + return err; + /* If the link is up, read the speed and duplex + If we aren't autonegotiating assume speeds are as set */ + if (mii_info->autoneg && mii_info->link) { + status = phy_read(mii_info, MII_DM9161_SCSR); + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + } + + return 0; +} + +static int dm9161_ack_interrupt(struct uec_mii_info *mii_info) +{ + /* Clear the interrupt by reading the reg */ + phy_read(mii_info, MII_DM9161_INTR); + + return 0; +} + +static int dm9161_config_intr(struct uec_mii_info *mii_info) +{ + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + else + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + + return 0; +} + +static void dm9161_close(struct uec_mii_info *mii_info) +{ +} + +static struct phy_info phy_info_dm9161 = { + .phy_id = 0x0181b880, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161E", + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .close = dm9161_close, +}; + +static struct phy_info phy_info_dm9161a = { + .phy_id = 0x0181b8a0, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161A", + .features = MII_BASIC_FEATURES, + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .close = dm9161_close, +}; + +static struct phy_info phy_info_marvell = { + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E11x1", + .features = MII_GBIT_FEATURES, + .config_aneg = &marvell_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, +}; + +static struct phy_info phy_info_genmii= { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .features = MII_BASIC_FEATURES, + .config_aneg = genmii_config_aneg, + .read_status = genmii_read_status, +}; + +static struct phy_info *phy_info[] = { + &phy_info_dm9161, + &phy_info_dm9161a, + &phy_info_marvell, + &phy_info_genmii, + NULL +}; + +u16 phy_read(struct uec_mii_info *mii_info, u16 regnum) +{ + return mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); +} + +void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val) +{ + mii_info->mdio_write(mii_info->dev, + mii_info->mii_id, + regnum, val); +} + +/* Use the PHY ID registers to determine what type of PHY is attached + * to device dev. return a struct phy_info structure describing that PHY + */ +struct phy_info * get_phy_info(struct uec_mii_info *mii_info) +{ + u16 phy_reg; + u32 phy_ID; + int i; + struct phy_info *theInfo = NULL; + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = phy_read(mii_info, PHY_PHYIDR1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = phy_read(mii_info, PHY_PHYIDR2); + phy_ID |= (phy_reg & 0xffff); + + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) + if (phy_info[i]->phy_id == + (phy_ID & phy_info[i]->phy_id_mask)) { + theInfo = phy_info[i]; + break; + } + + /* This shouldn't happen, as we have generic PHY support */ + if (theInfo == NULL) { + ugphy_info("UEC: PHY id %x is not supported!", phy_ID); + return NULL; + } else { + ugphy_info("UEC: PHY is %s (%x)", theInfo->name, phy_ID); + } + + return theInfo; +} + +void marvell_phy_interface_mode(struct eth_device *dev, enet_interface_e mode) +{ + uec_private_t *uec = (uec_private_t *)dev->priv; + struct uec_mii_info *mii_info; + + if (!uec->mii_info) { + printf("%s: the PHY not intialized\n", __FUNCTION__); + return; + } + mii_info = uec->mii_info; + + if (mode == ENET_100_RGMII) { + phy_write(mii_info, 0x00, 0x9140); + phy_write(mii_info, 0x1d, 0x001f); + phy_write(mii_info, 0x1e, 0x200c); + phy_write(mii_info, 0x1d, 0x0005); + phy_write(mii_info, 0x1e, 0x0000); + phy_write(mii_info, 0x1e, 0x0100); + phy_write(mii_info, 0x09, 0x0e00); + phy_write(mii_info, 0x04, 0x01e1); + phy_write(mii_info, 0x00, 0x9140); + phy_write(mii_info, 0x00, 0x1000); + udelay(100000); + phy_write(mii_info, 0x00, 0x2900); + phy_write(mii_info, 0x14, 0x0cd2); + phy_write(mii_info, 0x00, 0xa100); + phy_write(mii_info, 0x09, 0x0000); + phy_write(mii_info, 0x1b, 0x800b); + phy_write(mii_info, 0x04, 0x05e1); + phy_write(mii_info, 0x00, 0xa100); + phy_write(mii_info, 0x00, 0x2100); + udelay(1000000); + } else if (mode == ENET_10_RGMII) { + phy_write(mii_info, 0x14, 0x8e40); + phy_write(mii_info, 0x1b, 0x800b); + phy_write(mii_info, 0x14, 0x0c82); + phy_write(mii_info, 0x00, 0x8100); + udelay(1000000); + } +} + +void change_phy_interface_mode(struct eth_device *dev, enet_interface_e mode) +{ +#ifdef CONFIG_PHY_MODE_NEED_CHANGE + marvell_phy_interface_mode(dev, mode); +#endif +} +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h new file mode 100644 index 0000000000..a82f1f5893 --- /dev/null +++ b/drivers/qe/uec_phy.h @@ -0,0 +1,256 @@ +/* + * Copyright (C) 2005 Freescale Semiconductor, Inc. + * + * Author: Shlomi Gridish + * + * Description: UCC ethernet driver -- PHY handling + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __UEC_PHY_H__ +#define __UEC_PHY_H__ + +#define MII_end ((u32)-2) +#define MII_read ((u32)-1) + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define UGETH_AN_TIMEOUT 2000 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Cicada Extended Control Register 1 */ +#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada Interrupt Mask Register */ +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK_DUPLEX 0x1000 +#define MII_CIS8201_IMASK_MASK 0xf000 + +/* Cicada Interrupt Status Register */ +#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT_STATUS 0x8000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_DUPLEX 0x1000 + +/* Cicada Auxiliary Control/Status Register */ +#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MII_CIS8201_AUXCONSTAT_100 0x0008 + +/* 88E1011 PHY Status Register */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 +#define MII_DM9161_SCR_RMII_INIT 0x0710 + +/* DM9161 Specified Configuration and Status Register */ +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 + +/* DM9161 Interrupt Register */ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ +(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ + | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) + +/* DM9161 10BT Configuration/Status */ +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 + +#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +#define MII_READ_COMMAND 0x00000001 + +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) + +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) + +/* Advertisement control register. */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) + +/* Taken from mii_if_info and sungem_phy.h */ +struct uec_mii_info { + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; + + struct eth_device *dev; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* The most recently read link state */ + int link; + + /* Enabled Interrupts */ + u32 interrupts; + + u32 advertising; + int autoneg; + int mii_id; + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + /* Provided by ethernet driver */ + int (*mdio_read) (struct eth_device *dev, int mii_id, int reg); + void (*mdio_write) (struct eth_device *dev, int mii_id, int reg, int val); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be ANDed with phy_id_mask to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * There are 6 commands which take a ugeth_mii_info structure. + * Each PHY must declare config_aneg, and read_status. + */ +struct phy_info { + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; + + /* Called to initialize the PHY */ + int (*init)(struct uec_mii_info *mii_info); + + /* Called to suspend the PHY for power */ + int (*suspend)(struct uec_mii_info *mii_info); + + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg)(struct uec_mii_info *mii_info); + + /* Determines the negotiated speed and duplex */ + int (*read_status)(struct uec_mii_info *mii_info); + + /* Clears any pending interrupts */ + int (*ack_interrupt)(struct uec_mii_info *mii_info); + + /* Enables or disables interrupts */ + int (*config_intr)(struct uec_mii_info *mii_info); + + /* Clears up any memory if needed */ + void (*close)(struct uec_mii_info *mii_info); +}; + +struct phy_info *get_phy_info(struct uec_mii_info *mii_info); +void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value); +int read_phy_reg(struct eth_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt(struct uec_mii_info *mii_info); +void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts); +#endif /* __UEC_PHY_H__ */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 418315bef2..8bc61b63a8 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -69,6 +69,8 @@ typedef struct global_data { #if defined(CONFIG_QE) u32 qe_clk; u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; #endif /* CONFIG_QE */ #if defined (CONFIG_MPC8360) u32 ddr_sec_clk; diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 0ae60618ec..330c3073d2 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -363,6 +363,35 @@ #define CONFIG_NET_MULTI 1 #endif +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK9 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 0 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK4 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif + /* * Environment */ diff --git a/include/ioports.h b/include/ioports.h index d7e19e195b..91ca6fb48e 100644 --- a/include/ioports.h +++ b/include/ioports.h @@ -53,3 +53,14 @@ typedef struct { * like the table in the 8260UM (and in the hymod manuals). */ extern const iop_conf_t iop_conf_tab[4][32]; + +typedef struct { + unsigned char port; + unsigned char pin; + int dir; + int open_drain; + int assign; +} qe_iop_conf_t; + +#define QE_IOP_TAB_END (-1) + diff --git a/net/eth.c b/net/eth.c index e8ac251a4f..022d423d59 100644 --- a/net/eth.c +++ b/net/eth.c @@ -54,6 +54,7 @@ extern int scc_initialize(bd_t*); extern int skge_initialize(bd_t*); extern int tsec_initialize(bd_t*, int, char *); extern int npe_initialize(bd_t *); +extern int uec_initialize(int); static struct eth_device *eth_devices, *eth_current; @@ -196,6 +197,12 @@ int eth_initialize(bd_t *bis) tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME); # endif #endif +#if defined(CONFIG_UEC_ETH1) + uec_initialize(0); +#endif +#if defined(CONFIG_UEC_ETH2) + uec_initialize(1); +#endif #if defined(CONFIG_MPC86XX_TSEC1) tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME); #endif From ac4b5622ce050b5ee1e154b98df630d778661632 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Tue, 31 Oct 2006 19:54:59 -0600 Subject: [PATCH 25/72] mpc83xx: add the README.mpc8360emds add doc/README.mpc8360emds to accompany the new board support --- doc/README.mpc8360emds | 126 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 doc/README.mpc8360emds diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds new file mode 100644 index 0000000000..2bb4dad8b6 --- /dev/null +++ b/doc/README.mpc8360emds @@ -0,0 +1,126 @@ +Freescale MPC8360EMDS Board +----------------------------------------- +1. Board Switches and Jumpers +1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board + For some reason, the HW designers describe the switch settings + in terms of 0 and 1, and then map that to physical switches where + the label "On" refers to logic 0 and "Off" is logic 1. + + Switch bits are numbered 1 through, like, 4 6 8 or 10, but the + bits may contribute to signals that are numbered based at 0, + and some of those signals may be high-bit-number-0 too. Heed + well the names and labels and do not get confused. + + "Off" == 1 + "On" == 0 + + SW18 is switch 18 as silk-screened onto the board. + SW4[8] is the bit labled 8 on Switch 4. + SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. + SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3. + SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" + and bits labeled 8 is set as "Off". + +1.1 For the MPC8360E PB PROTO Board + + First, make sure the board default setting is consistent with the + document shipped with your board. Then apply the following setting: + SW3[1-8]= 0000_0100 (HRCW setting value is performed on local bus) + SW4[1-8]= 0011_0000 (Flash boot on local bus) + SW9[1-8]= 0110_0110 (PCI Mode enabled. HRCW is read from FLASH) + SW10[1-8]= 0000_1000 (core PLL setting) + SW11[1-8]= 0000_0100 (SW11 is on the another side of the board) + JP6 1-2 + on board Oscillator: 66M + + +2. Memory Map + +2.1. The memory map should look pretty much like this: + + 0x0000_0000 0x7fff_ffff DDR 2G + 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M + 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M + 0xc000_0000 0xdfff_ffff Empty 512M + 0xe000_0000 0xe01f_ffff Int Mem Reg Space 2M + 0xe020_0000 0xe02f_ffff Empty 1M + 0xe030_0000 0xe03f_ffff PCI IO 1M + 0xe040_0000 0xefff_ffff Empty 252M + 0xf000_0000 0xf3ff_ffff Local Bus SDRAM 64M + 0xf400_0000 0xf7ff_ffff Empty 64M + 0xf800_0000 0xf800_7fff BCSR on CS1 32K + 0xf800_8000 0xf800_ffff PIB CS4 32K + 0xf801_0000 0xf801_7fff PIB CS5 32K + 0xfe00_0000 0xfeff_ffff FLASH on CS0 16M + + +3. Definitions + +3.1 Explanation of NEW definitions in: + + include/configs/MPC8360EMDS.h + + CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 + CONFIG_MPC8360 MPC8360 specific + CONFIG_MPC8360EMDS MPC8360EMDS board specific + +4. Compilation + + Assuming you're using BASH shell: + + export CROSS_COMPILE=your-cross-compile-prefix + cd u-boot + make distclean + make MPC8360EMDS_config + make + + MPC8360 support PCI in host and slave mode. + + To make u-boot support PCI host 66M : + 1) DIP SW support PCI mode as described in Section 1.1. + 2) Make MPC8360EMDS_HOST_66_config + + To make u-boot support PCI host 33M : + 1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1 + 2) Make MPC8360EMDS_HOST_33_config + + To make u-boot support PCI slave 66M : + 1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1 + 2) Make MPC8360EMDS_SLAVE_config + + +5. Downloading and Flashing Images + +5.0 Download over serial line using Kermit: + + loadb + [Drop to kermit: + ^\c + send + c + ] + + + Or via tftp: + + tftp 10000 u-boot.bin + +5.1 Reflash U-boot Image using U-boot + + tftp 20000 u-boot.bin + protect off fef00000 fef3ffff + erase fef00000 fef3ffff + + cp.b 20000 fef00000 xxxx + + or + + cp.b 20000 fef00000 3ffff + + +You have to supply the correct byte count with 'xxxx' from the TFTP result log. +Maybe 3ffff will work too, that corresponds to the erased sectors. + + +6. Notes + 1) The console baudrate for MPC8360EMDS is 115200bps. From 9ca880a250870a7d55754291b5591d2b5fe89b54 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 31 Oct 2006 21:23:16 -0600 Subject: [PATCH 26/72] mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS This patch also adds an improved I2C set_speed(), which handles all clock frequencies. Signed-off-by: Timur Tabi --- board/mpc8349emds/pci.c | 8 +- board/mpc8349itx/mpc8349itx.c | 6 +- board/mpc8349itx/pci.c | 2 +- board/mpc8360emds/pci.c | 11 +- cpu/mpc83xx/i2c.c | 210 +++++++++++++++++++++------------- include/asm-ppc/i2c.h | 10 +- include/configs/MPC8349ITX.h | 2 +- include/configs/TQM834x.h | 2 +- include/i2c.h | 8 +- 9 files changed, 152 insertions(+), 107 deletions(-) diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index a916245aea..93827f11d8 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -75,10 +75,8 @@ pib_init(void) /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); - if(orig_i2c_bus != I2C_BUS_2) - i2c_set_bus_num(I2C_BUS_2); - - i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + if(orig_i2c_bus != 2) + i2c_set_bus_num(2); val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); @@ -124,7 +122,7 @@ pib_init(void) printf("PCI2: 32-bit on PMC3\n"); #endif /* Reset to original I2C bus */ - if(orig_i2c_bus != I2C_BUS_2) + if(orig_i2c_bus != 2) i2c_set_bus_num(orig_i2c_bus); } diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 9a5cbec858..4662645886 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -259,7 +259,7 @@ int checkboard(void) puts("Board: Freescale MPC8349E-mITX"); #ifdef CONFIG_HARD_I2C - i2c_set_bus_num(I2C_BUS_2); + i2c_set_bus_num(2); if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1, @@ -379,7 +379,7 @@ int misc_init_r(void) u8 data[sizeof(eeprom_data)]; - i2c_set_bus_num(I2C_BUS_1); + i2c_set_bus_num(1); if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { if (memcmp(data, eeprom_data, sizeof(data)) != 0) { @@ -397,7 +397,7 @@ int misc_init_r(void) #endif #ifdef CFG_I2C_RTC_ADDR - i2c_set_bus_num(I2C_BUS_2); + i2c_set_bus_num(2); if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) == 0) { diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index acac185d54..cf07020b62 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -105,7 +105,7 @@ void pci_init_board(void) udelay(2000); #ifdef CONFIG_HARD_I2C - i2c_set_bus_num(I2C_BUS_2); + i2c_set_bus_num(2); /* Read the PCI_M66EN jumper setting */ if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 880b2ecc3e..64ea50979d 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -198,8 +198,11 @@ void pci_init_board(void) * Assign PIB PMC slot to desired PCI bus */ - mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET); - i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + + if(orig_i2c_bus != 2) + i2c_set_bus_num(2); val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); @@ -227,6 +230,10 @@ void pci_init_board(void) i2c_write(0x27, 0x3, 1, &val8, 1); asm("eieio"); + /* Reset to original I2C bus */ + if(orig_i2c_bus != 2) + i2c_set_bus_num(orig_i2c_bus); + /* * Release PCI RST Output signal */ diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c index fc89fb1e25..ce78491616 100644 --- a/cpu/mpc83xx/i2c.c +++ b/cpu/mpc83xx/i2c.c @@ -47,75 +47,121 @@ DECLARE_GLOBAL_DATA_PTR; -/* Three I2C bus speeds are supported here (50kHz, 100kHz - * and 400kHz). It should be easy to add more. Note that - * the maximum bus speed for I2C bus 1 is CSB/3, while I2C - * bus 2 can go as high as CSB. - * Typical values for CSB are 266MHz and 200MHz. */ - - /* 50kH 100kHz 400kHz */ -static const uchar speed_map_266[][3] = - {{0x2e, 0x2a, 0x20}, /* base 88MHz */ - {0x34, 0x30, 0x28}}; /* base 266 MHz */ - -static const uchar speed_map_200[][3] = - {{0x2c, 0x28, 0x20}, /* base 66 MHz */ - {0x33, 0x2f, 0x26}}; /* base 200 MHz */ - /* Initialize the bus pointer to whatever one the SPD EEPROM is on. * Default is bus 1. This is necessary because the DDR initialization * runs from ROM, and we can't switch buses because we can't modify * the i2c_dev variable. Everything gets straightened out once i2c_init * is called from RAM. */ -#if defined CFG_SPD_BUS_NUM -static i2c_t *i2c_dev = CFG_SPD_BUS_NUM; -#else -static i2c_t *i2c_dev = I2C_1; +#ifndef CFG_SPD_BUS_NUM +#define CFG_SPD_BUS_NUM 1 #endif -static uchar busNum = I2C_BUS_1 ; -static int bus_speed[2] = {0, 0}; +static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM; -static int set_speed(int speed) +#if CFG_SPD_BUS_NUM == 1 +static volatile i2c_t *i2c_dev = I2C_1; +#else +static volatile i2c_t *i2c_dev = I2C_2; +#endif + +static int i2c_bus_speed[2] = {0, 0}; + +/* + * Map the frequency divider to the FDR. This data is taken from table 17-5 + * of the MPC8349EA reference manual, with duplicates removed. + */ +static struct { + unsigned int divider; + u8 fdr; +} i2c_speed_map[] = { - uchar value; - const uchar *spdPtr; + {0, 0x20}, + {256, 0x20}, + {288, 0x21}, + {320, 0x22}, + {352, 0x23}, + {384, 0x24}, + {416, 0x01}, + {448, 0x25}, + {480, 0x02}, + {512, 0x26}, + {576, 0x27}, + {640, 0x28}, + {704, 0x05}, + {768, 0x29}, + {832, 0x06}, + {896, 0x2A}, + {1024, 0x2B}, + {1152, 0x08}, + {1280, 0x2C}, + {1536, 0x2D}, + {1792, 0x2E}, + {1920, 0x0B}, + {2048, 0x2F}, + {2304, 0x0C}, + {2560, 0x30}, + {3072, 0x31}, + {3584, 0x32}, + {3840, 0x0F}, + {4096, 0x33}, + {4608, 0x10}, + {5120, 0x34}, + {6144, 0x35}, + {7168, 0x36}, + {7680, 0x13}, + {8192, 0x37}, + {9216, 0x14}, + {10240, 0x38}, + {12288, 0x39}, + {14336, 0x3A}, + {15360, 0x17}, + {16384, 0x3B}, + {18432, 0x18}, + {20480, 0x3C}, + {24576, 0x3D}, + {28672, 0x3E}, + {30720, 0x1B}, + {32768, 0x3F}, + {36864, 0x1C}, + {40960, 0x1D}, + {49152, 0x1E}, + {61440, 0x1F}, + {-1, 0x1F} +}; - /* Global data contains maximum I2C bus 1 speed, which is CSB/3 */ - if(gd->i2c_clk == 88000000) - { - spdPtr = speed_map_266[busNum]; - } - else if(gd->i2c_clk == 66000000) - { - spdPtr = speed_map_200[busNum]; - } - else - { - printf("Max I2C bus speed %d not supported\n", gd->i2c_clk); - return -1; - } +#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0])) - switch(speed) - { - case 50000: - value = *(spdPtr + 0); - break; - case 100000: - value = *(spdPtr + 1); - break; - case 400000: - value = *(spdPtr + 2); - break; - default: - printf("I2C bus speed %d not supported\n", speed); - return -2; - } - /* set clock */ - writeb(value, &i2c_dev->fdr); - bus_speed[busNum] = speed; - return 0; +static int set_speed(unsigned int speed) +{ + unsigned long i2c_clk; + unsigned int divider, i; + u8 fdr = 0x3F; + + i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk; + + divider = i2c_clk / speed; + + /* Scan i2c_speed_map[] for the closest matching divider.*/ + + for (i = 0; i < NUM_I2C_SPEEDS-1; i++) { + /* Locate our divider in between two entries in i2c_speed_map[] */ + if ((divider >= i2c_speed_map[i].divider) && + (divider <= i2c_speed_map[i+1].divider)) { + /* Which one is closer? */ + if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) { + fdr = i2c_speed_map[i].fdr; + } else { + fdr = i2c_speed_map[i+1].fdr; + } + break; + } + } + + writeb(fdr, &i2c_dev->fdr); + i2c_bus_speed[i2c_bus_num - 1] = speed; + + return 0; } @@ -125,16 +171,16 @@ static void _i2c_init(int speed, int slaveadd) writeb(0x00 , &i2c_dev->cr); /* set clock */ - writeb(speed, &i2c_dev->fdr); + set_speed(speed); /* set default filter */ - writeb(0x10,&i2c_dev->dfsrr); + writeb(IC2_FDR,&i2c_dev->dfsrr); /* write slave address */ writeb(slaveadd, &i2c_dev->adr); /* clear status register */ - writeb(0x00, &i2c_dev->sr); + writeb(I2C_CR_MTX, &i2c_dev->sr); /* start I2C controller */ writeb(I2C_CR_MEN, &i2c_dev->cr); @@ -142,19 +188,19 @@ static void _i2c_init(int speed, int slaveadd) void i2c_init(int speed, int slaveadd) { - /* Set both interfaces to the same speed and slave address */ - /* Note: This function gets called twice - before and after - * relocation to RAM. The first time it's called, we are unable - * to change buses, so whichever one 'i2c_dev' was initialized to - * gets set twice. When run from RAM both buses get set properly */ + /* Set both interfaces to the same speed and slave address */ + /* Note: This function gets called twice - before and after + * relocation to RAM. The first time it's called, we are unable + * to change buses, so whichever one 'i2c_dev' was initialized to + * gets set twice. When run from RAM both buses get set properly */ - i2c_set_bus_num(I2C_BUS_1); - _i2c_init(speed, slaveadd); -#ifdef CFG_I2C2_OFFSET - i2c_set_bus_num(I2C_BUS_2); - _i2c_init(speed, slaveadd); - i2c_set_bus_num(I2C_BUS_1); -#endif /* CFG_I2C2_OFFSET */ + i2c_set_bus_num(1); + _i2c_init(speed, slaveadd); +#ifdef CFG_I2C2_OFFSET + i2c_set_bus_num(2); + _i2c_init(speed, slaveadd); + i2c_set_bus_num(1); +#endif /* CFG_I2C2_OFFSET */ } static __inline__ int @@ -340,38 +386,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) i2c_write (i2c_addr, reg, 1, &val, 1); } -int i2c_set_bus_num(uchar bus) +int i2c_set_bus_num(unsigned int bus) { - if(bus == I2C_BUS_1) + if(bus == 1) { i2c_dev = I2C_1; } #ifdef CFG_I2C2_OFFSET - else if(bus == I2C_BUS_2) + else if(bus == 2) { i2c_dev = I2C_2; } -#endif /* CFG_I2C2_OFFSET */ +#endif else { return -1; } - busNum = bus; + i2c_bus_num = bus; return 0; } -int i2c_set_bus_speed(int speed) +int i2c_set_bus_speed(unsigned int speed) { return set_speed(speed); } -uchar i2c_get_bus_num(void) +unsigned int i2c_get_bus_num(void) { - return busNum; + return i2c_bus_num; } -int i2c_get_bus_speed(void) +unsigned int i2c_get_bus_speed(void) { - return bus_speed[busNum]; + return i2c_bus_speed[i2c_bus_num - 1]; } #endif /* CONFIG_HARD_I2C */ diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h index baf9d9a262..8afdda2ce2 100644 --- a/include/asm-ppc/i2c.h +++ b/include/asm-ppc/i2c.h @@ -79,12 +79,6 @@ typedef struct i2c #endif #define I2C_TIMEOUT (CFG_HZ/4) -enum I2C_BUS_NUM -{ - I2C_BUS_1 = 0, - I2C_BUS_2, -}; - #ifndef CFG_IMMRBAR #error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h #endif @@ -96,9 +90,9 @@ enum I2C_BUS_NUM #define I2C_1 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) /* Optional support for second I2C bus */ -#ifdef CFG_I2C2_OFFSET +#ifdef CFG_I2C2_OFFSET #define I2C_2 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET)) -#endif /* CFG_I2C2_OFFSET */ +#endif /* CFG_I2C2_OFFSET */ #define I2C_READ 1 #define I2C_WRITE 0 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 20f3c6d399..2fbc736182 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -81,7 +81,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 -#define CFG_SPD_BUS_NUM I2C_2 +#define CFG_SPD_BUS_NUM 2 #define CFG_I2C_8574_ADDR1 0x20 /* I2C2, PCF8574 */ #define CFG_I2C_8574_ADDR2 0x21 /* I2C2, PCF8574 */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index f0e49007d0..727094b203 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -36,8 +36,8 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ -#define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC834X 1 /* MPC834X specific */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ diff --git a/include/i2c.h b/include/i2c.h index 97e006163a..a8f729afe0 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -97,7 +97,7 @@ void i2c_reg_write(uchar chip, uchar reg, uchar val); * Returns: 0 on success, not 0 on failure * */ -int i2c_set_bus_num(uchar bus); +int i2c_set_bus_num(unsigned int bus); /* * i2c_get_bus_num: @@ -105,7 +105,7 @@ int i2c_set_bus_num(uchar bus); * Returns index of currently active I2C bus. Zero-based. */ -uchar i2c_get_bus_num(void); +unsigned int i2c_get_bus_num(void); /* * i2c_set_bus_speed: @@ -117,7 +117,7 @@ uchar i2c_get_bus_num(void); * Returns: 0 on success, not 0 on failure * */ -int i2c_set_bus_speed(int); +int i2c_set_bus_speed(unsigned int); /* * i2c_get_bus_speed: @@ -125,6 +125,6 @@ int i2c_set_bus_speed(int); * Returns speed of currently active I2C bus in Hz */ -int i2c_get_bus_speed(void); +unsigned int i2c_get_bus_speed(void); #endif /* _I2C_H_ */ From 48041365b3420589ad464ebc7752e0053538b729 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 1 Nov 2006 00:07:25 -0600 Subject: [PATCH 27/72] mpc83xx: change ft code to modify local-mac-address property Update 83xx OF code to update local-mac-address properties for ethernet instead of the obsolete 'address' property. --- cpu/mpc83xx/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 1de337b33c..3d8ca772c6 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -297,12 +297,12 @@ ft_cpu_setup(void *blob, bd_t *bd) *p = cpu_to_be32(clock); #ifdef CONFIG_MPC83XX_TSEC1 - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); memcpy(p, bd->bi_enetaddr, 6); #endif #ifdef CONFIG_MPC83XX_TSEC2 - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); memcpy(p, bd->bi_enet1addr, 6); #endif } From bf0b542d6773a5a1cbce77691f009b06d9aeb57d Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 1 Nov 2006 00:10:40 -0600 Subject: [PATCH 28/72] mpc83xx: add OF_FLAT_TREE bits to 83xx boards add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and STDOUT_PATH configuration bits to mpc8349emds, mpc8349itx, and mpc8360emds board code. redo environment to use bootm with the fdtaddr for booting ARCH=powerpc kernels by default, and provide default fdtaddr values. --- board/mpc8349emds/mpc8349emds.c | 24 ++++++++++++++++ board/mpc8349emds/pci.c | 22 ++++++++++++++ board/mpc8349itx/mpc8349itx.c | 23 +++++++++++++++ board/mpc8349itx/pci.c | 22 ++++++++++++++ board/mpc8360emds/mpc8360emds.c | 23 +++++++++++++++ board/mpc8360emds/pci.c | 19 ++++++++++++ include/configs/MPC8349EMDS.h | 51 +++++++++++++++++++++++++++++---- include/configs/MPC8349ITX.h | 45 ++++++++++++++++++++++++----- include/configs/MPC8360EMDS.h | 36 +++++++++++++++++------ 9 files changed, 245 insertions(+), 20 deletions(-) diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 6b3dedcbd9..ed7b71d086 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -33,6 +33,10 @@ #if defined(CONFIG_SPD_EEPROM) #include #endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif + int fixed_sdram(void); void sdram_init(void); @@ -564,3 +568,23 @@ U_BOOT_CMD( " - re-inits memory" ); #endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index 93827f11d8..908be57546 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -385,4 +385,26 @@ pci_init_board(void) } +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ #endif /* CONFIG_PCI */ diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 4662645886..9fce973df0 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -37,6 +37,9 @@ #else #include #endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif #ifndef CONFIG_SPD_EEPROM /************************************************************************* @@ -459,3 +462,23 @@ int misc_init_r(void) return rc; } + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index cf07020b62..b4637bc8cd 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -330,3 +330,25 @@ void pci_init_board(void) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 5eadcd39eb..5bbaa5cf2e 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -28,6 +28,9 @@ #else #include #endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -628,3 +631,23 @@ U_BOOT_CMD(ecc, 4, 0, do_ecc, " - writes pattern with word access, generates error\n" " - disables injects\n" " - re-inits memory"); #endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 64ea50979d..c81e7a64ed 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -234,6 +234,10 @@ void pci_init_board(void) if(orig_i2c_bus != 2) i2c_set_bus_num(orig_i2c_bus); + /* Reset to original I2C bus */ + if(orig_i2c_bus != 2) + i2c_set_bus_num(orig_i2c_bus); + /* * Release PCI RST Output signal */ @@ -298,4 +302,19 @@ void pci_init_board(void) hose->last_busno = pci_hose_scan(hose); } #endif /* CONFIG_PCISLAVE */ + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ #endif /* CONFIG_PCI */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 4d5ad57192..e68c41accf 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -35,6 +35,7 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC834X 1 /* MPC834X family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ @@ -59,6 +60,17 @@ #endif #endif +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ #define CFG_IMMRBAR 0xE0000000 @@ -308,6 +320,18 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ @@ -668,11 +692,11 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif -#define CONFIG_IPADDR 192.168.205.5 +#define CONFIG_IPADDR 192.168.1.253 #define CONFIG_HOSTNAME mpc8349emds -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx -#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -705,14 +729,31 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mpc8349emds/uImage\0" \ "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ "update=protect off fe000000 fe03ffff; " \ "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ "upd=run load;run update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ "" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + #define CONFIG_BOOTCOMMAND "run flash_self" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 2fbc736182..aaf4d101dc 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -383,6 +383,17 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" #ifdef CONFIG_PCI @@ -697,17 +708,17 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif -#define CONFIG_IPADDR 10.82.19.159 -#define CONFIG_SERVERIP 10.82.48.106 -#define CONFIG_GATEWAYIP 10.82.19.254 +#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.252.0 #define CONFIG_NETDEV eth0 #define CONFIG_HOSTNAME mpc8349emitx -#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs -#define CONFIG_BOOTFILE timur/uImage +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage -#define CONFIG_UBOOTPATH timur/u-boot.bin +#define CONFIG_UBOOTPATH u-boot.bin #define CONFIG_UBOOTSTART fe700000 #define CONFIG_UBOOTEND fe77ffff @@ -747,7 +758,27 @@ "cmp.b $loadaddr FEF00000 $filesize\0" \ "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ - "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" + "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emitx.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #undef MK_STR diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 330c3073d2..feb9cf22f2 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -101,6 +101,8 @@ #define CFG_SDRAM_BASE CFG_DDR_BASE #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_83XX_DDR_USES_CS0 + #undef CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ @@ -313,6 +315,18 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8360@0" +#define OF_SOC "soc8360@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" + /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ @@ -591,23 +605,29 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ + "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ + "" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ + "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND From 90f30a710a3c619b5405860a686c4ddfc495d4b6 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Thu, 2 Nov 2006 18:05:50 -0600 Subject: [PATCH 29/72] mpc83xx: Fix the incorrect dcbz operation The 834x rev1.x silicon has one CPU5 errata. The issue is when the data cache locked with HID0[DLOCK], the dcbz instruction looks like no-op inst. The right behavior of the data cache is when the data cache Locked with HID0[DLOCK], the dcbz instruction allocates new tags in cache. The 834x rev3.0 and later and 8360 have not this bug inside. So, when 834x rev3.0/8360 are working with ECC, the dcbz instruction will corrupt the stack in cache, the processor will checkstop reset. However, the 834x rev1.x can work with ECC with these code, because the sillicon has this cache bug. The dcbz will not corrupt the stack in cache. Really, it is the fault code running on fault sillicon. This patch fix the incorrect dcbz operation. Instead of CPU FP writing to initialise the ECC. CHANGELOG: * Fix the incorrect dcbz operation instead of CPU FP writing to initialise the ECC memory. Otherwise, it will corrupt the stack in cache, The processor will checkstop reset. Signed-off-by: Dave Liu --- board/mpc8360emds/mpc8360emds.c | 4 +++ cpu/mpc83xx/spd_sdram.c | 52 ++++++++++++--------------------- cpu/mpc83xx/start.S | 12 ++++++++ include/common.h | 5 ++++ 4 files changed, 39 insertions(+), 34 deletions(-) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 5bbaa5cf2e..a9b1d9eb32 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -535,6 +535,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) /* write memory location injecting errors */ ppcDWstore((u32 *) i, pattern); + __asm__ __volatile__("sync"); /* disable injects */ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; @@ -543,10 +544,12 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) /* read data, this generates ECC error */ ppcDWload((u32 *) i, ret); + __asm__ __volatile__("sync"); /* re-initialize memory, double word write the location again, * generates new ECC code this time */ ppcDWstore((u32 *) i, writeback); + __asm__ __volatile__("sync"); } enable_interrupts(); return 0; @@ -588,6 +591,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) * double word write the location again, * generates new ECC code this time */ ppcDWstore((u32 *) i, writeback); + __asm__ __volatile__("sync"); } enable_interrupts(); return 0; diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index acc8c9e79b..b91c6130e7 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -562,54 +562,38 @@ static __inline__ unsigned long get_tbms (void) /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */ void ddr_enable_ecc(unsigned int dram_size) { - uint *p; volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; volatile ddr83xx_t *ddr= &immap->ddr; unsigned long t_start, t_end; + register u64 *p; + register uint size; + unsigned int pattern[2]; #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) uint i; #endif - - debug("Initialize a Cachline in DRAM\n"); icache_enable(); - -#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) - /* Initialise DMA for direct Transfers */ - dma_init(); -#endif - t_start = get_tbms(); + pattern[0] = 0xdeadbeef; + pattern[1] = 0xdeadbeef; #if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA) - debug("DDR init: Cache flush method\n"); - for (p = 0; p < (uint *)(dram_size); p++) { - if (((unsigned int)p & 0x1f) == 0) { - ppcDcbz((unsigned long) p); - } - - /* write pattern to cache and flush */ - *p = (unsigned int)0xdeadbeef; - - if (((unsigned int)p & 0x1c) == 0x1c) { - ppcDcbf((unsigned long) p); - } + debug("ddr init: CPU FP write method\n"); + size = dram_size; + for (p = 0; p < (u64*)(size); p++) { + ppcDWstore((u32*)p, pattern); } + __asm__ __volatile__ ("sync"); #else - printf("DDR init: DMA method\n"); - for (p = 0; p < (uint *)(8 * 1024); p++) { - /* zero one data cache line */ - if (((unsigned int)p & 0x1f) == 0) { - ppcDcbz((unsigned long)p); - } - - /* write pattern to it and flush */ - *p = (unsigned int)0xdeadbeef; - - if (((unsigned int)p & 0x1c) == 0x1c) { - ppcDcbf((unsigned long)p); - } + debug("ddr init: DMA method\n"); + size = 0x2000; + for (p = 0; p < (u64*)(size); p++) { + ppcDWstore((u32*)p, pattern); } + __asm__ __volatile__ ("sync"); + /* Initialise DMA for direct transfer */ + dma_init(); + /* Start DMA to transfer */ dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */ dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */ dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */ diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index a7ed3c5b2c..c43835c8dc 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -870,6 +870,18 @@ ppcDcbz: dcbz r0,r3 blr + .globl ppcDWstore +ppcDWstore: + lfd 1, 0(r4) + stfd 1, 0(r3) + blr + + .globl ppcDWload +ppcDWload: + lfd 1, 0(r3) + stfd 1, 0(r4) + blr + /*-------------------------------------------------------------------*/ /* diff --git a/include/common.h b/include/common.h index 349d5cf726..0be8372cc5 100644 --- a/include/common.h +++ b/include/common.h @@ -402,6 +402,11 @@ void ppcSync(void); void ppcDcbz(unsigned long value); #endif +#if defined (CONFIG_MPC83XX) +void ppcDWload(unsigned int *addr, unsigned int *ret); +void ppcDWstore(unsigned int *addr, unsigned int *value); +#endif + /* $(CPU)/cpu.c */ int checkcpu (void); int checkicache (void); From f7fb2e703ec9688541416962724adff70a7322cb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 2 Nov 2006 19:47:11 -0600 Subject: [PATCH 30/72] mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c --- cpu/mpc83xx/speed.c | 161 ++++++++++++++++++++++---------------------- 1 file changed, 82 insertions(+), 79 deletions(-) diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 31fcadd1ea..1e082a7868 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -53,38 +53,38 @@ typedef enum { typedef struct { mult_t core_csb_ratio; - mult_t vco_divider; + mult_t vco_divider; } corecnf_t; corecnf_t corecnf_tab[] = { - { _byp, _byp}, /* 0x00 */ - { _byp, _byp}, /* 0x01 */ - { _byp, _byp}, /* 0x02 */ - { _byp, _byp}, /* 0x03 */ - { _byp, _byp}, /* 0x04 */ - { _byp, _byp}, /* 0x05 */ - { _byp, _byp}, /* 0x06 */ - { _byp, _byp}, /* 0x07 */ - { _1x, _x2}, /* 0x08 */ - { _1x, _x4}, /* 0x09 */ - { _1x, _x8}, /* 0x0A */ - { _1x, _x8}, /* 0x0B */ - {_1_5x, _x2}, /* 0x0C */ - {_1_5x, _x4}, /* 0x0D */ - {_1_5x, _x8}, /* 0x0E */ - {_1_5x, _x8}, /* 0x0F */ - { _2x, _x2}, /* 0x10 */ - { _2x, _x4}, /* 0x11 */ - { _2x, _x8}, /* 0x12 */ - { _2x, _x8}, /* 0x13 */ - {_2_5x, _x2}, /* 0x14 */ - {_2_5x, _x4}, /* 0x15 */ - {_2_5x, _x8}, /* 0x16 */ - {_2_5x, _x8}, /* 0x17 */ - { _3x, _x2}, /* 0x18 */ - { _3x, _x4}, /* 0x19 */ - { _3x, _x8}, /* 0x1A */ - { _3x, _x8}, /* 0x1B */ + {_byp, _byp}, /* 0x00 */ + {_byp, _byp}, /* 0x01 */ + {_byp, _byp}, /* 0x02 */ + {_byp, _byp}, /* 0x03 */ + {_byp, _byp}, /* 0x04 */ + {_byp, _byp}, /* 0x05 */ + {_byp, _byp}, /* 0x06 */ + {_byp, _byp}, /* 0x07 */ + {_1x, _x2}, /* 0x08 */ + {_1x, _x4}, /* 0x09 */ + {_1x, _x8}, /* 0x0A */ + {_1x, _x8}, /* 0x0B */ + {_1_5x, _x2}, /* 0x0C */ + {_1_5x, _x4}, /* 0x0D */ + {_1_5x, _x8}, /* 0x0E */ + {_1_5x, _x8}, /* 0x0F */ + {_2x, _x2}, /* 0x10 */ + {_2x, _x4}, /* 0x11 */ + {_2x, _x8}, /* 0x12 */ + {_2x, _x8}, /* 0x13 */ + {_2_5x, _x2}, /* 0x14 */ + {_2_5x, _x4}, /* 0x15 */ + {_2_5x, _x8}, /* 0x16 */ + {_2_5x, _x8}, /* 0x17 */ + {_3x, _x2}, /* 0x18 */ + {_3x, _x4}, /* 0x19 */ + {_3x, _x8}, /* 0x1A */ + {_3x, _x8}, /* 0x1B */ }; /* ----------------------------------------------------------------- */ @@ -92,15 +92,15 @@ corecnf_t corecnf_tab[] = { /* * */ -int get_clocks (void) +int get_clocks(void) { - volatile immap_t *im = (immap_t *)CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; u32 pci_sync_in; - u8 spmf; - u8 clkin_div; + u8 spmf; + u8 clkin_div; u32 sccr; u32 corecnf_tab_index; - u8 corepll; + u8 corepll; u32 lcrr; u32 csb_clk; @@ -125,7 +125,7 @@ int get_clocks (void) u32 brg_clk; #endif - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); @@ -224,17 +224,18 @@ int get_clocks (void) return -8; } - if (usbmph_clk != 0 - && usbdr_clk != 0 - && usbmph_clk != usbdr_clk ) { - /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */ + if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { + /* if USB MPH clock is not disabled and + * USB DR clock is not disabled then + * USB MPH & USB DR must have the same rate + */ return -9; } #endif #if defined (CONFIG_MPC8360) i2c1_clk = csb_clk; #endif - i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ + i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { case 0: @@ -254,7 +255,8 @@ int get_clocks (void) return -6; } #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) - lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); + lbiu_clk = csb_clk * + (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); #else #error Unknown MPC83xx chip #endif @@ -270,17 +272,19 @@ int get_clocks (void) return -10; } #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) - ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); + ddr_clk = csb_clk * + (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT; #if defined (CONFIG_MPC8360) - ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); + ddr_sec_clk = csb_clk * (1 + + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); #endif #else #error Unknown MPC83xx chip #endif corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5); - if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) { + if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) { /* corecnf_tab_index is too high, possibly worng value */ return -11; } @@ -297,7 +301,7 @@ int get_clocks (void) core_clk = 2 * csb_clk; break; case _2_5x: - core_clk = ( 5 * csb_clk) / 2; + core_clk = (5 * csb_clk) / 2; break; case _3x: core_clk = 3 * csb_clk; @@ -310,31 +314,31 @@ int get_clocks (void) #if defined (CONFIG_MPC8360) qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT; qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT; - qe_clk = (pci_sync_in * qepmf)/(1+qepdf); + qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); brg_clk = qe_clk / 2; #endif - gd->csb_clk = csb_clk; + gd->csb_clk = csb_clk; #if defined(CONFIG_MPC8349) - gd->tsec1_clk = tsec1_clk; - gd->tsec2_clk = tsec2_clk; - gd->usbmph_clk = usbmph_clk; - gd->usbdr_clk = usbdr_clk; + gd->tsec1_clk = tsec1_clk; + gd->tsec2_clk = tsec2_clk; + gd->usbmph_clk = usbmph_clk; + gd->usbdr_clk = usbdr_clk; #endif - gd->core_clk = core_clk; - gd->i2c1_clk = i2c1_clk; - gd->i2c2_clk = i2c2_clk; - gd->enc_clk = enc_clk; - gd->lbiu_clk = lbiu_clk; - gd->lclk_clk = lclk_clk; - gd->ddr_clk = ddr_clk; + gd->core_clk = core_clk; + gd->i2c1_clk = i2c1_clk; + gd->i2c2_clk = i2c2_clk; + gd->enc_clk = enc_clk; + gd->lbiu_clk = lbiu_clk; + gd->lclk_clk = lclk_clk; + gd->ddr_clk = ddr_clk; #if defined (CONFIG_MPC8360) gd->ddr_sec_clk = ddr_sec_clk; - gd->qe_clk = qe_clk; - gd->brg_clk = brg_clk; + gd->qe_clk = qe_clk; + gd->brg_clk = brg_clk; #endif - gd->cpu_clk = gd->core_clk; - gd->bus_clk = gd->csb_clk; + gd->cpu_clk = gd->core_clk; + gd->bus_clk = gd->csb_clk; return 0; } @@ -344,38 +348,37 @@ ulong get_ddr_clk(ulong dummy) return gd->ddr_clk; } - /******************************************** * get_bus_freq * return system bus freq in Hz *********************************************/ -ulong get_bus_freq (ulong dummy) +ulong get_bus_freq(ulong dummy) { return gd->csb_clk; } -int print_clock_conf (void) +int print_clock_conf(void) { printf("Clock configuration:\n"); - printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000); - printf(" Core: %4d MHz\n",gd->core_clk/1000000); + printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); + printf(" Core: %4d MHz\n", gd->core_clk / 1000000); #if defined (CONFIG_MPC8360) - printf(" QE: %4d MHz\n",gd->qe_clk/1000000); + printf(" QE: %4d MHz\n", gd->qe_clk / 1000000); #endif - printf(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000); - printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000); - printf(" DDR: %4d MHz\n",gd->ddr_clk/1000000); + printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); + printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); #if defined (CONFIG_MPC8360) - printf(" DDR Secondary: %4d MHz\n",gd->ddr_sec_clk/1000000); + printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); #endif - printf(" SEC: %4d MHz\n",gd->enc_clk/1000000); - printf(" I2C1: %4d MHz\n",gd->i2c1_clk/1000000); - printf(" I2C2: %4d MHz\n",gd->i2c2_clk/1000000); + printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); + printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); + printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); #if defined(CONFIG_MPC8349) - printf(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000); - printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000); - printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000); - printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000); + printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); + printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); + printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); + printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000); #endif return 0; } From d239d74b1c937984bc519083a8e7de373a390f06 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 3 Nov 2006 12:00:28 -0600 Subject: [PATCH 31/72] mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx tree matches the other 8xxx trees. Signed-off-by: Timur Tabi --- board/mpc8349emds/mpc8349emds.c | 10 +++++----- board/mpc8349emds/pci.c | 10 +++++----- board/mpc8349itx/mpc8349itx.c | 8 ++++---- board/mpc8349itx/pci.c | 6 +++--- board/mpc8360emds/mpc8360emds.c | 10 +++++----- board/mpc8360emds/pci.c | 8 ++++---- board/tqm834x/pci.c | 6 +++--- board/tqm834x/tqm834x.c | 4 ++-- cpu/mpc83xx/cpu.c | 14 +++++++------- cpu/mpc83xx/cpu_init.c | 2 +- cpu/mpc83xx/interrupts.c | 2 +- cpu/mpc83xx/qe_io.c | 2 +- cpu/mpc83xx/spd_sdram.c | 4 ++-- cpu/mpc83xx/speed.c | 2 +- cpu/mpc83xx/start.S | 16 ++++++++-------- drivers/tsec.h | 2 +- include/asm-ppc/i2c.h | 8 ++++---- include/configs/MPC8349EMDS.h | 14 +++++++------- include/configs/MPC8349ITX.h | 10 +++++----- include/configs/MPC8360EMDS.h | 10 +++++----- include/configs/TQM834x.h | 14 +++++++------- lib_ppc/board.c | 2 +- 22 files changed, 82 insertions(+), 82 deletions(-) diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index ed7b71d086..873bdd01cd 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -63,7 +63,7 @@ int board_early_init_f (void) long int initdram (int board_type) { - volatile immap_t *im = (immap_t *)CFG_IMMRBAR; + volatile immap_t *im = (immap_t *)CFG_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) @@ -100,7 +100,7 @@ long int initdram (int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *)CFG_IMMRBAR; + volatile immap_t *im = (immap_t *)CFG_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; @@ -171,7 +171,7 @@ int checkboard (void) void sdram_init(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; @@ -249,7 +249,7 @@ void sdram_init(void) */ void ecc_print_status(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); @@ -324,7 +324,7 @@ void ecc_print_status(void) int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; volatile u32 val; u64 *addr, count, val64; diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index 908be57546..da49a5d80d 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -146,7 +146,7 @@ pci_init_board(void) u32 dev; struct pci_controller * hose; - immr = (immap_t *)CFG_IMMRBAR; + immr = (immap_t *)CFG_IMMR; clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -260,8 +260,8 @@ pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMRBAR+0x8300), - (CFG_IMMRBAR+0x8304)); + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); pci_register_hose(hose); @@ -356,8 +356,8 @@ pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMRBAR+0x8380), - (CFG_IMMRBAR+0x8384)); + (CFG_IMMR+0x8380), + (CFG_IMMR+0x8384)); pci_register_hose(hose); diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 9fce973df0..c0e72c93e1 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -47,7 +47,7 @@ ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMR; u32 ddr_size; /* The size of RAM, in bytes */ u32 ddr_size_log2 = 0; @@ -139,7 +139,7 @@ volatile static struct pci_controller hose[] = { void sdram_init(void) { - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile lbus83xx_t *lbc = &immap->lbus; #if defined(CFG_BR2_PRELIM) \ @@ -219,7 +219,7 @@ void sdram_init(void) long int initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMR; u32 msize = 0; #ifdef CONFIG_DDR_ECC volatile ddr83xx_t *ddr = &im->ddr; @@ -328,7 +328,7 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile lbus83xx_t *lbus = &immap->lbus; lbus->bank[3].br = CFG_BR3_PRELIM; diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index b4637bc8cd..535cc34afc 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -88,7 +88,7 @@ void pci_init_board(void) u32 dev; struct pci_controller *hose; - immr = (immap_t *) CFG_IMMRBAR; + immr = (immap_t *) CFG_IMMR; clk = (clk83xx_t *) & immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -211,7 +211,7 @@ void pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); pci_register_hose(hose); @@ -302,7 +302,7 @@ void pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMRBAR + 0x8380), (CFG_IMMRBAR + 0x8384)); + (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); pci_register_hose(hose); diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index a9b1d9eb32..ddc1047c61 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -106,7 +106,7 @@ void sdram_init(void); long int initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) @@ -141,7 +141,7 @@ long int initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; @@ -196,7 +196,7 @@ int checkboard(void) void sdram_init(void) { - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile lbus83xx_t *lbc = &immap->lbus; uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; @@ -267,7 +267,7 @@ void sdram_init(void) */ void ecc_print_status(void) { - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; printf("\nECC mode: %s\n\n", @@ -347,7 +347,7 @@ void ecc_print_status(void) int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; volatile u32 val; u64 *addr; diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index c81e7a64ed..a013ba3d43 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -63,7 +63,7 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - immr = (immap_t *) CFG_IMMRBAR; + immr = (immap_t *) CFG_IMMR; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; @@ -89,7 +89,7 @@ void pci_init_board(void) hose[0].first_busno = 0; hose[0].last_busno = 0xff; pci_setup_indirect(&hose[0], - (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); reg16 = 0xff; pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), @@ -131,7 +131,7 @@ void pci_init_board(void) u32 val32; u32 dev; - immr = (immap_t *) CFG_IMMRBAR; + immr = (immap_t *) CFG_IMMR; clk = (clk83xx_t *) & immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -274,7 +274,7 @@ void pci_init_board(void) hose[0].region_count = 4; pci_setup_indirect(&hose[0], - (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); pci_register_hose(hose); diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c index d01277f808..d896f17aad 100644 --- a/board/tqm834x/pci.c +++ b/board/tqm834x/pci.c @@ -78,7 +78,7 @@ pci_init_board(void) u32 reg32; struct pci_controller * hose; - immr = (immap_t *)CFG_IMMRBAR; + immr = (immap_t *)CFG_IMMR; clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -186,8 +186,8 @@ pci_init_board(void) hose->region_count = 3; pci_setup_indirect(hose, - (CFG_IMMRBAR+0x8300), - (CFG_IMMRBAR+0x8304)); + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); pci_register_hose(hose); diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index 41b34cc6fa..36d901f094 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -69,7 +69,7 @@ static void set_cs_config(short cs, long config); static void set_ddr_config(void); /* Local variable */ -static volatile immap_t *im = (immap_t *)CFG_IMMRBAR; +static volatile immap_t *im = (immap_t *)CFG_IMMR; /************************************************************************** * Board initialzation after relocation to RAM. Used to detect the number @@ -147,7 +147,7 @@ int checkboard (void) volatile immap_t * immr; u32 w, f; - immr = (immap_t *)CFG_IMMRBAR; + immr = (immap_t *)CFG_IMMR; if (!(immr->reset.rcwh & RCWH_PCIHOST)) { printf("PCI: NOT in host mode..?!\n"); return 0; diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 3d8ca772c6..0bd05330de 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -49,7 +49,7 @@ int checkcpu(void) u32 spridr; char buf[32]; - immr = (immap_t *)CFG_IMMRBAR; + immr = (immap_t *)CFG_IMMR; if ((pvr & 0xFFFF0000) != PVR_83xx) { puts("Not MPC83xx Family!!!\n"); @@ -141,7 +141,7 @@ int checkcpu(void) void upmconfig (uint upm, uint *table, uint size) { #if defined(CONFIG_MPC834X) - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile lbus83xx_t *lbus = &immap->lbus; volatile uchar *dummy = NULL; const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ @@ -188,7 +188,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ulong addr; #endif - volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; #ifdef MPC83xx_RESET /* Interrupts and MMU off */ @@ -259,7 +259,7 @@ void watchdog_reset (void) int re_enable = disable_interrupts(); /* Reset the 83xx watchdog */ - volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; immr->wdt.swsrr = 0x556c; immr->wdt.swsrr = 0xaa39; @@ -311,7 +311,7 @@ ft_cpu_setup(void *blob, bd_t *bd) #if defined(CONFIG_DDR_ECC) void dma_init(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 dmamr0 = swab32(dma->dmamr0); @@ -342,7 +342,7 @@ void dma_init(void) uint dma_check(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 byte_count = swab32(dma->dmabcr0); @@ -361,7 +361,7 @@ uint dma_check(void) int dma_xfer(void *dest, u32 count, void *src) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 dmamr0; diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index eb8f8c042f..4f80f4a094 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -219,7 +219,7 @@ void cpu_init_f (volatile immap_t * im) int cpu_init_r (void) { #ifdef CONFIG_QE - uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */ + uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */ qe_init(qe_base); qe_reset(); #endif diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c index 5a0babfcbb..98fccff227 100644 --- a/cpu/mpc83xx/interrupts.c +++ b/cpu/mpc83xx/interrupts.c @@ -45,7 +45,7 @@ struct irq_action { int interrupt_init_cpu (unsigned *decrementer_count) { - volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c index 11cf3722bd..ebe3487112 100644 --- a/cpu/mpc83xx/qe_io.c +++ b/cpu/mpc83xx/qe_io.c @@ -34,7 +34,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) u32 pin_2bit_assign; u32 pin_1bit_mask; u32 tmp_val; - volatile immap_t *im = (volatile immap_t *)CFG_IMMRBAR; + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio; /* Caculate pin location and 2bit mask and dir */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index b91c6130e7..dc8f6790a6 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -112,7 +112,7 @@ static void spd_debug(spd_eeprom_t *spd) long int spd_sdram() { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; spd_eeprom_t spd; @@ -562,7 +562,7 @@ static __inline__ unsigned long get_tbms (void) /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */ void ddr_enable_ecc(unsigned int dram_size) { - volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ddr83xx_t *ddr= &immap->ddr; unsigned long t_start, t_end; register u64 *p; diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 1e082a7868..213e7180a7 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -94,7 +94,7 @@ corecnf_t corecnf_tab[] = { */ int get_clocks(void) { - volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + volatile immap_t *im = (immap_t *) CFG_IMMR; u32 pci_sync_in; u8 spmf; u8 clkin_div; diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index c43835c8dc..0f27bb61f8 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -104,9 +104,9 @@ version_string: #ifndef CONFIG_DEFAULT_IMMR #error CONFIG_DEFAULT_IMMR must be defined #endif /* CFG_DEFAULT_IMMR */ -#ifndef CFG_IMMRBAR -#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR -#endif /* CFG_IMMRBAR */ +#ifndef CFG_IMMR +#define CFG_IMMR CONFIG_DEFAULT_IMMR +#endif /* CFG_IMMR */ /* * After configuration, a system reset exception is executed using the @@ -152,8 +152,8 @@ boot_cold: /* time t 3 */ nop boot_warm: /* time t 5 */ mfmsr r5 /* save msr contents */ - lis r3, CFG_IMMRBAR@h - ori r3, r3, CFG_IMMRBAR@l + lis r3, CFG_IMMR@h + ori r3, r3, CFG_IMMR@l stw r3, IMMRBAR(r4) /* Initialise the E300 processor core */ @@ -226,7 +226,7 @@ in_flash: GET_GOT /* initialize GOT access */ /* r3: IMMR */ - lis r3, CFG_IMMRBAR@h + lis r3, CFG_IMMR@h /* run low-level CPU init code (in Flash)*/ bl cpu_init_f @@ -446,7 +446,7 @@ init_e300_core: /* time t 10 */ mtspr SRR1, r3 /* Make SRR1 match MSR */ - lis r3, CFG_IMMRBAR@h + lis r3, CFG_IMMR@h #if defined(CONFIG_WATCHDOG) /* Initialise the Wathcdog values and reset it (if req) */ /*------------------------------------------------------*/ @@ -1201,7 +1201,7 @@ map_flash_by_law1: /* When booting from ROM (Flash or EPROM), clear the */ /* Address Mask in OR0 so ROM appears everywhere */ /*----------------------------------------------------*/ - lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */ + lis r3, (CFG_IMMR)@h /* r3 <= CFG_IMMR */ lwz r4, OR0@l(r3) li r5, 0x7fff /* r5 <= 0x00007FFFF */ and r4, r4, r5 diff --git a/drivers/tsec.h b/drivers/tsec.h index 4aa331c458..cee30037db 100644 --- a/drivers/tsec.h +++ b/drivers/tsec.h @@ -30,7 +30,7 @@ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) #elif defined(CONFIG_MPC83XX) - #define TSEC_BASE_ADDR (CFG_IMMRBAR + CFG_TSEC1_OFFSET) + #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) #endif diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h index 8afdda2ce2..37847666db 100644 --- a/include/asm-ppc/i2c.h +++ b/include/asm-ppc/i2c.h @@ -79,19 +79,19 @@ typedef struct i2c #endif #define I2C_TIMEOUT (CFG_HZ/4) -#ifndef CFG_IMMRBAR -#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h +#ifndef CFG_IMMR +#error CFG_IMMR is not defined in /include/configs/${BOARD}.h #endif #ifndef CFG_I2C_OFFSET #error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h #endif -#define I2C_1 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) +#define I2C_1 ((i2c_t*)(CFG_IMMR + CFG_I2C_OFFSET)) /* Optional support for second I2C bus */ #ifdef CFG_I2C2_OFFSET -#define I2C_2 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET)) +#define I2C_2 ((i2c_t*)(CFG_IMMR + CFG_I2C2_OFFSET)) #endif /* CFG_I2C2_OFFSET */ #define I2C_READ 1 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index e68c41accf..4a5b4bc4a7 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -73,7 +73,7 @@ #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ -#define CFG_IMMRBAR 0xE0000000 +#define CFG_IMMR 0xE0000000 #undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00000000 /* memtest region */ @@ -311,8 +311,8 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER @@ -345,9 +345,9 @@ /* TSEC */ #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) /* USB */ #define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ @@ -641,8 +641,8 @@ #endif /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index aaf4d101dc..c74e63a4d4 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -128,7 +128,7 @@ #endif #endif -#define CFG_IMMRBAR 0xE0000000 /* The IMMR is relocated to here */ +#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ #undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00003000 /* memtest region */ @@ -374,8 +374,8 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER @@ -653,8 +653,8 @@ #endif /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index feb9cf22f2..a8f2df911e 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -92,7 +92,7 @@ /* * IMMR new address */ -#define CFG_IMMRBAR 0xE0000000 +#define CFG_IMMR 0xE0000000 /* * DDR Setup @@ -306,8 +306,8 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER @@ -515,9 +515,9 @@ #define CFG_DBAT0U CFG_IBAT0U /* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CFG_IBAT1L (CFG_IMMRBAR | BATL_PP_10 | \ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT1U (CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) #define CFG_DBAT1L CFG_IBAT1L #define CFG_DBAT1U CFG_IBAT1U diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 727094b203..b0b0673cff 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -41,7 +41,7 @@ #define CONFIG_TQM834X 1 /* TQM834X board specific */ /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ -#define CFG_IMMRBAR 0xff400000 +#define CFG_IMMR 0xff400000 /* System clock. Primary input clock when in PCI host mode */ #define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ @@ -210,8 +210,8 @@ extern int tqm834x_num_flash_banks; #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* * I2C @@ -248,9 +248,9 @@ extern int tqm834x_num_flash_banks; #define CONFIG_MII #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR + CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR + CFG_TSEC2_OFFSET) #if defined(CONFIG_TSEC_ENET) @@ -473,8 +473,8 @@ extern int tqm834x_num_flash_banks; #endif /* IMMRBAR */ -#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CFG_IBAT6L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP) /* FLASH */ #define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 844bbc9003..1866dc5cf0 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -511,7 +511,7 @@ void board_init_f (ulong bootflag) bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83XX) - bd->bi_immrbar = CFG_IMMRBAR; + bd->bi_immrbar = CFG_IMMR; #endif #if defined(CONFIG_MPC8220) bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ From be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 3 Nov 2006 19:15:00 -0600 Subject: [PATCH 32/72] mpc83xx: Update 83xx to use fsl_i2c.c Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. Added multiple I2C bus support to fsl_i2c.c. Signed-off-by: Timur Tabi --- README | 11 + board/mpc8349emds/pci.c | 7 +- board/mpc8349itx/mpc8349itx.c | 47 ++-- board/mpc8349itx/pci.c | 5 +- board/mpc8360emds/pci.c | 13 +- cpu/mpc83xx/Makefile | 2 +- cpu/mpc83xx/cpu.c | 4 +- cpu/mpc83xx/i2c.c | 423 ---------------------------------- drivers/fsl_i2c.c | 105 ++++++--- include/asm-ppc/i2c.h | 100 -------- include/asm-ppc/immap_83xx.h | 4 +- include/configs/MPC8349EMDS.h | 1 + include/configs/MPC8349ITX.h | 49 ++-- include/configs/MPC8360EMDS.h | 3 +- include/configs/TQM834x.h | 1 + 15 files changed, 159 insertions(+), 616 deletions(-) delete mode 100644 cpu/mpc83xx/i2c.c delete mode 100644 include/asm-ppc/i2c.h diff --git a/README b/README index 5c907c8f07..d03862b3ef 100644 --- a/README +++ b/README @@ -1342,6 +1342,17 @@ The following options need to be configured: will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 + CFG_SPD_BUS_NUM + + If defined, then this indicates the I2C bus number for DDR SPD. + If not defined, then U-Boot assumes that SPD is on I2C bus 0. + + CONFIG_FSL_I2C + + Define this option if you want to use Freescale's I2C driver in + drivers/fsl_i2c.c. + + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index da49a5d80d..bb60e730bc 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -74,9 +74,7 @@ pib_init(void) */ /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); - - if(orig_i2c_bus != 2) - i2c_set_bus_num(2); + i2c_set_bus_num(1); val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); @@ -122,8 +120,7 @@ pib_init(void) printf("PCI2: 32-bit on PMC3\n"); #endif /* Reset to original I2C bus */ - if(orig_i2c_bus != 2) - i2c_set_bus_num(orig_i2c_bus); + i2c_set_bus_num(orig_i2c_bus); } /************************************************************************** diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index c0e72c93e1..097bb370e7 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -134,8 +134,7 @@ volatile static struct pci_controller hose[] = { }; #endif /* CONFIG_PCI */ -/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. -*/ +/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. */ void sdram_init(void) { @@ -255,32 +254,12 @@ long int initdram(int board_type) int checkboard(void) { -#ifdef CONFIG_HARD_I2C - u8 i2c_data; -#endif - - puts("Board: Freescale MPC8349E-mITX"); - -#ifdef CONFIG_HARD_I2C - i2c_set_bus_num(2); - if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == - 0) - printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1, - i2c_data & 0x01); - else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) - == 0) - printf(" %u.%u (PCF8475)", (i2c_data & 0x02) >> 1, - i2c_data & 0x01); - else - printf(" ?.?"); -#endif - - puts("\n"); + puts("Board: Freescale MPC8349E-mITX\n"); return 0; } -/** +/* * Implement a work-around for a hardware problem with compact * flash. * @@ -347,7 +326,7 @@ int misc_init_f(void) return 0; } -/** +/* * Make sure the EEPROM has the HRCW correctly programmed. * Make sure the RTC is correctly programmed. * @@ -366,7 +345,8 @@ int misc_init_r(void) #ifdef CONFIG_HARD_I2C - uchar orig_bus = i2c_get_bus_num();; + unsigned int orig_bus = i2c_get_bus_num();; + u8 i2c_data; #ifdef CFG_I2C_RTC_ADDR char ds1339_data[17]; @@ -381,8 +361,21 @@ int misc_init_r(void) }; u8 data[sizeof(eeprom_data)]; +#endif + printf("Board revision: "); i2c_set_bus_num(1); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else { + printf("Unknown\n"); + rc = 1; + } + +#ifdef CFG_I2C_EEPROM_ADDR + i2c_set_bus_num(0); if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { if (memcmp(data, eeprom_data, sizeof(data)) != 0) { @@ -400,7 +393,7 @@ int misc_init_r(void) #endif #ifdef CFG_I2C_RTC_ADDR - i2c_set_bus_num(2); + i2c_set_bus_num(1); if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) == 0) { diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index 535cc34afc..e81ad27356 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -29,6 +29,9 @@ #include #include #include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif DECLARE_GLOBAL_DATA_PTR; @@ -105,7 +108,7 @@ void pci_init_board(void) udelay(2000); #ifdef CONFIG_HARD_I2C - i2c_set_bus_num(2); + i2c_set_bus_num(1); /* Read the PCI_M66EN jumper setting */ if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index a013ba3d43..15a48dcf40 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -19,7 +19,7 @@ #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -200,9 +200,7 @@ void pci_init_board(void) /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); - - if(orig_i2c_bus != 2) - i2c_set_bus_num(2); + i2c_set_bus_num(1); val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); @@ -231,12 +229,7 @@ void pci_init_board(void) asm("eieio"); /* Reset to original I2C bus */ - if(orig_i2c_bus != 2) - i2c_set_bus_num(orig_i2c_bus); - - /* Reset to original I2C bus */ - if(orig_i2c_bus != 2) - i2c_set_bus_num(orig_i2c_bus); + i2c_set_bus_num(orig_i2c_bus); /* * Release PCI RST Output signal diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index e254ef98f6..4b9dcc8180 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a START = start.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - i2c.o spd_sdram.o qe_io.o + spd_sdram.o qe_io.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 0bd05330de..1d169bab22 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -111,7 +111,7 @@ int checkcpu(void) } -/** +/* * Program a UPM with the code supplied in the table. * * The 'dummy' variable is used to increment the MAD. 'dummy' is @@ -137,7 +137,7 @@ int checkcpu(void) * upm: 0=UPMA, 1=UPMB, 2=UPMC * table: Pointer to an array of values to program * size: Number of elements in the array. Must be 64 or less. -*/ + */ void upmconfig (uint upm, uint *table, uint size) { #if defined(CONFIG_MPC834X) diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c deleted file mode 100644 index ce78491616..0000000000 --- a/cpu/mpc83xx/i2c.c +++ /dev/null @@ -1,423 +0,0 @@ -/* - * (C) Copyright 2006 Freescale Semiconductor, Inc. - * - * (C) Copyright 2003,Motorola Inc. - * Xianghua Xiao - * Adapted for Motorola 85xx chip. - * - * (C) Copyright 2003 - * Gleb Natapov - * Some bits are taken from linux driver writen by adrian@humboldt.co.uk - * - * Hardware I2C driver for MPC107 PCI bridge. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Change log: - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) - * 20060601: Dave Liu (daveliu@freescale.com) - * Unified variable names for mpc83xx - */ - -#include -#include -#include - -#ifdef CONFIG_HARD_I2C -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* Initialize the bus pointer to whatever one the SPD EEPROM is on. - * Default is bus 1. This is necessary because the DDR initialization - * runs from ROM, and we can't switch buses because we can't modify - * the i2c_dev variable. Everything gets straightened out once i2c_init - * is called from RAM. */ - -#ifndef CFG_SPD_BUS_NUM -#define CFG_SPD_BUS_NUM 1 -#endif - -static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM; - -#if CFG_SPD_BUS_NUM == 1 -static volatile i2c_t *i2c_dev = I2C_1; -#else -static volatile i2c_t *i2c_dev = I2C_2; -#endif - -static int i2c_bus_speed[2] = {0, 0}; - -/* - * Map the frequency divider to the FDR. This data is taken from table 17-5 - * of the MPC8349EA reference manual, with duplicates removed. - */ -static struct { - unsigned int divider; - u8 fdr; -} i2c_speed_map[] = -{ - {0, 0x20}, - {256, 0x20}, - {288, 0x21}, - {320, 0x22}, - {352, 0x23}, - {384, 0x24}, - {416, 0x01}, - {448, 0x25}, - {480, 0x02}, - {512, 0x26}, - {576, 0x27}, - {640, 0x28}, - {704, 0x05}, - {768, 0x29}, - {832, 0x06}, - {896, 0x2A}, - {1024, 0x2B}, - {1152, 0x08}, - {1280, 0x2C}, - {1536, 0x2D}, - {1792, 0x2E}, - {1920, 0x0B}, - {2048, 0x2F}, - {2304, 0x0C}, - {2560, 0x30}, - {3072, 0x31}, - {3584, 0x32}, - {3840, 0x0F}, - {4096, 0x33}, - {4608, 0x10}, - {5120, 0x34}, - {6144, 0x35}, - {7168, 0x36}, - {7680, 0x13}, - {8192, 0x37}, - {9216, 0x14}, - {10240, 0x38}, - {12288, 0x39}, - {14336, 0x3A}, - {15360, 0x17}, - {16384, 0x3B}, - {18432, 0x18}, - {20480, 0x3C}, - {24576, 0x3D}, - {28672, 0x3E}, - {30720, 0x1B}, - {32768, 0x3F}, - {36864, 0x1C}, - {40960, 0x1D}, - {49152, 0x1E}, - {61440, 0x1F}, - {-1, 0x1F} -}; - -#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0])) - -static int set_speed(unsigned int speed) -{ - unsigned long i2c_clk; - unsigned int divider, i; - u8 fdr = 0x3F; - - i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk; - - divider = i2c_clk / speed; - - /* Scan i2c_speed_map[] for the closest matching divider.*/ - - for (i = 0; i < NUM_I2C_SPEEDS-1; i++) { - /* Locate our divider in between two entries in i2c_speed_map[] */ - if ((divider >= i2c_speed_map[i].divider) && - (divider <= i2c_speed_map[i+1].divider)) { - /* Which one is closer? */ - if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) { - fdr = i2c_speed_map[i].fdr; - } else { - fdr = i2c_speed_map[i+1].fdr; - } - break; - } - } - - writeb(fdr, &i2c_dev->fdr); - i2c_bus_speed[i2c_bus_num - 1] = speed; - - return 0; -} - - -static void _i2c_init(int speed, int slaveadd) -{ - /* stop I2C controller */ - writeb(0x00 , &i2c_dev->cr); - - /* set clock */ - set_speed(speed); - - /* set default filter */ - writeb(IC2_FDR,&i2c_dev->dfsrr); - - /* write slave address */ - writeb(slaveadd, &i2c_dev->adr); - - /* clear status register */ - writeb(I2C_CR_MTX, &i2c_dev->sr); - - /* start I2C controller */ - writeb(I2C_CR_MEN, &i2c_dev->cr); -} - -void i2c_init(int speed, int slaveadd) -{ - /* Set both interfaces to the same speed and slave address */ - /* Note: This function gets called twice - before and after - * relocation to RAM. The first time it's called, we are unable - * to change buses, so whichever one 'i2c_dev' was initialized to - * gets set twice. When run from RAM both buses get set properly */ - - i2c_set_bus_num(1); - _i2c_init(speed, slaveadd); -#ifdef CFG_I2C2_OFFSET - i2c_set_bus_num(2); - _i2c_init(speed, slaveadd); - i2c_set_bus_num(1); -#endif /* CFG_I2C2_OFFSET */ -} - -static __inline__ int -i2c_wait4bus (void) -{ - ulong timeval = get_timer (0); - while (readb(&i2c_dev->sr) & I2C_SR_MBB) { - if (get_timer (timeval) > I2C_TIMEOUT) { - return -1; - } - } - return 0; -} - -static __inline__ int -i2c_wait (int write) -{ - u32 csr; - ulong timeval = get_timer(0); - do { - csr = readb(&i2c_dev->sr); - - if (!(csr & I2C_SR_MIF)) - continue; - - writeb(0x0, &i2c_dev->sr); - - if (csr & I2C_SR_MAL) { - debug("i2c_wait: MAL\n"); - return -1; - } - - if (!(csr & I2C_SR_MCF)) { - debug("i2c_wait: unfinished\n"); - return -1; - } - - if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) { - debug("i2c_wait: No RXACK\n"); - return -1; - } - - return 0; - } while (get_timer (timeval) < I2C_TIMEOUT); - - debug("i2c_wait: timed out\n"); - return -1; -} - -static __inline__ int -i2c_write_addr (u8 dev, u8 dir, int rsta) -{ - writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | - (rsta?I2C_CR_RSTA:0), - &i2c_dev->cr); - - writeb((dev << 1) | dir, &i2c_dev->dr); - - if (i2c_wait (I2C_WRITE) < 0) - return 0; - return 1; -} - -static __inline__ int -__i2c_write (u8 *data, int length) -{ - int i; - - writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, - &i2c_dev->cr); - - for (i=0; i < length; i++) { - writeb(data[i], &i2c_dev->dr); - - if (i2c_wait (I2C_WRITE) < 0) - break; - } - return i; -} - -static __inline__ int -__i2c_read (u8 *data, int length) -{ - int i; - - writeb(I2C_CR_MEN | I2C_CR_MSTA | - ((length == 1) ? I2C_CR_TXAK : 0), - &i2c_dev->cr); - - /* dummy read */ - readb(&i2c_dev->dr); - - for (i=0; i < length; i++) { - if (i2c_wait (I2C_READ) < 0) - break; - - /* Generate ack on last next to last byte */ - if (i == length - 2) - writeb(I2C_CR_MEN | I2C_CR_MSTA | - I2C_CR_TXAK, - &i2c_dev->cr); - - /* Generate stop on last byte */ - if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr); - - data[i] = readb(&i2c_dev->dr); - } - return i; -} - -int -i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) -{ - int i = 0; - u8 *a = (u8*)&addr; - - if (i2c_wait4bus () < 0) - goto exit; - - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) - goto exit; - - if (__i2c_write (&a[4 - alen], alen) != alen) - goto exit; - - if (i2c_write_addr (dev, I2C_READ, 1) == 0) - goto exit; - - i = __i2c_read (data, length); - - exit: - writeb(I2C_CR_MEN, &i2c_dev->cr); - return !(i == length); -} - -int -i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) -{ - int i = 0; - u8 *a = (u8*)&addr; - - if (i2c_wait4bus () < 0) - goto exit; - - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) - goto exit; - - if (__i2c_write (&a[4 - alen], alen) != alen) - goto exit; - - i = __i2c_write (data, length); - - exit: - writeb(I2C_CR_MEN, &i2c_dev->cr); - return !(i == length); -} - -int i2c_probe (uchar chip) -{ - int tmp; - - /* - * Try to read the first location of the chip. The underlying - * driver doesn't appear to support sending just the chip address - * and looking for an back. - */ - udelay(10000); - return i2c_read (chip, 0, 1, (uchar *)&tmp, 1); -} - -uchar i2c_reg_read (uchar i2c_addr, uchar reg) -{ - uchar buf[1]; - - i2c_read (i2c_addr, reg, 1, buf, 1); - - return (buf[0]); -} - -void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write (i2c_addr, reg, 1, &val, 1); -} - -int i2c_set_bus_num(unsigned int bus) -{ - if(bus == 1) - { - i2c_dev = I2C_1; - } -#ifdef CFG_I2C2_OFFSET - else if(bus == 2) - { - i2c_dev = I2C_2; - } -#endif - else - { - return -1; - } - i2c_bus_num = bus; - return 0; -} - -int i2c_set_bus_speed(unsigned int speed) -{ - return set_speed(speed); -} - -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -unsigned int i2c_get_bus_speed(void) -{ - return i2c_bus_speed[i2c_bus_num - 1]; -} -#endif /* CONFIG_HARD_I2C */ diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c index 65c27439e3..0e39213487 100644 --- a/drivers/fsl_i2c.c +++ b/drivers/fsl_i2c.c @@ -28,29 +28,49 @@ #include /* HW definitions */ #define I2C_TIMEOUT (CFG_HZ / 4) -#define I2C ((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET)) +/* Initialize the bus pointer to whatever one the SPD EEPROM is on. + * Default is bus 0. This is necessary because the DDR initialization + * runs from ROM, and we can't switch buses because we can't modify + * the global variables. + */ +#ifdef CFG_SPD_BUS_NUM +static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM; +#else +static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0; +#endif + +static volatile struct fsl_i2c *i2c_dev[2] = { + (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET), +#ifdef CFG_I2C2_OFFSET + (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET) +#endif +}; void i2c_init(int speed, int slaveadd) { - /* stop I2C controller */ - writeb(0x0, &I2C->cr); + volatile struct fsl_i2c *dev; - /* set clock */ - writeb(0x3f, &I2C->fdr); + dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET); - /* set default filter */ - writeb(0x10, &I2C->dfsrr); + writeb(0, &dev->cr); /* stop I2C controller */ + writeb(0x3F, &dev->fdr); /* set bus speed */ + writeb(0x3F, &dev->dfsrr); /* set default filter */ + writeb(slaveadd, &dev->adr); /* write slave address */ + writeb(0x0, &dev->sr); /* clear status register */ + writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ - /* write slave address */ - writeb(slaveadd, &I2C->adr); +#ifdef CFG_I2C2_OFFSET + dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET); - /* clear status register */ - writeb(0x0, &I2C->sr); - - /* start I2C controller */ - writeb(I2C_CR_MEN, &I2C->cr); + writeb(0, &dev->cr); /* stop I2C controller */ + writeb(0x3F, &dev->fdr); /* set bus speed */ + writeb(0x3F, &dev->dfsrr); /* set default filter */ + writeb(slaveadd, &dev->adr); /* write slave address */ + writeb(0x0, &dev->sr); /* clear status register */ + writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ +#endif /* CFG_I2C2_OFFSET */ } static __inline__ int @@ -58,7 +78,7 @@ i2c_wait4bus(void) { ulong timeval = get_timer(0); - while (readb(&I2C->sr) & I2C_SR_MBB) { + while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { if (get_timer(timeval) > I2C_TIMEOUT) { return -1; } @@ -74,11 +94,11 @@ i2c_wait(int write) ulong timeval = get_timer(0); do { - csr = readb(&I2C->sr); + csr = readb(&i2c_dev[i2c_bus_num]->sr); if (!(csr & I2C_SR_MIF)) continue; - writeb(0x0, &I2C->sr); + writeb(0x0, &i2c_dev[i2c_bus_num]->sr); if (csr & I2C_SR_MAL) { debug("i2c_wait: MAL\n"); @@ -107,9 +127,9 @@ i2c_write_addr (u8 dev, u8 dir, int rsta) { writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | (rsta ? I2C_CR_RSTA : 0), - &I2C->cr); + &i2c_dev[i2c_bus_num]->cr); - writeb((dev << 1) | dir, &I2C->dr); + writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr); if (i2c_wait(I2C_WRITE) < 0) return 0; @@ -123,10 +143,10 @@ __i2c_write(u8 *data, int length) int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, - &I2C->cr); + &i2c_dev[i2c_bus_num]->cr); for (i = 0; i < length; i++) { - writeb(data[i], &I2C->dr); + writeb(data[i], &i2c_dev[i2c_bus_num]->dr); if (i2c_wait(I2C_WRITE) < 0) break; @@ -141,10 +161,10 @@ __i2c_read(u8 *data, int length) int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), - &I2C->cr); + &i2c_dev[i2c_bus_num]->cr); /* dummy read */ - readb(&I2C->dr); + readb(&i2c_dev[i2c_bus_num]->dr); for (i = 0; i < length; i++) { if (i2c_wait(I2C_READ) < 0) @@ -153,13 +173,13 @@ __i2c_read(u8 *data, int length) /* Generate ack on last next to last byte */ if (i == length - 2) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, - &I2C->cr); + &i2c_dev[i2c_bus_num]->cr); /* Generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr); + writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); - data[i] = readb(&I2C->dr); + data[i] = readb(&i2c_dev[i2c_bus_num]->dr); } return i; @@ -178,7 +198,7 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) i = __i2c_read(data, length); } - writeb(I2C_CR_MEN, &I2C->cr); + writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); if (i == length) return 0; @@ -198,7 +218,7 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) i = __i2c_write(data, length); } - writeb(I2C_CR_MEN, &I2C->cr); + writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); if (i == length) return 0; @@ -237,5 +257,34 @@ i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) i2c_write(i2c_addr, reg, 1, &val, 1); } +int i2c_set_bus_num(unsigned int bus) +{ +#ifdef CFG_I2C2_OFFSET + if (bus > 1) { +#else + if (bus > 0) { +#endif + return -1; + } + + i2c_bus_num = bus; + + return 0; +} + +int i2c_set_bus_speed(unsigned int speed) +{ + return -1; +} + +unsigned int i2c_get_bus_num(void) +{ + return i2c_bus_num; +} + +unsigned int i2c_get_bus_speed(void) +{ + return 0; +} #endif /* CONFIG_HARD_I2C */ #endif /* CONFIG_FSL_I2C */ diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h deleted file mode 100644 index 37847666db..0000000000 --- a/include/asm-ppc/i2c.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Freescale I2C Controller - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2003, Motorola, Inc. - * author: Eran Liberty (liberty@freescale.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_I2C_H_ -#define _ASM_I2C_H_ - -#include - -typedef struct i2c -{ - u8 adr; /**< I2C slave address */ -#define I2C_ADR 0xFE -#define I2C_ADR_SHIFT 1 -#define I2C_ADR_RES ~(I2C_ADR) - u8 res0[3]; - u8 fdr; /**< I2C frequency divider register */ -#define IC2_FDR 0x3F -#define IC2_FDR_SHIFT 0 -#define IC2_FDR_RES ~(IC2_FDR) - u8 res1[3]; - u8 cr; /**< I2C control redister */ -#define I2C_CR_MEN 0x80 -#define I2C_CR_MIEN 0x40 -#define I2C_CR_MSTA 0x20 -#define I2C_CR_MTX 0x10 -#define I2C_CR_TXAK 0x08 -#define I2C_CR_RSTA 0x04 -#define I2C_CR_BCST 0x01 - u8 res2[3]; - u8 sr; /**< I2C status register */ -#define I2C_SR_MCF 0x80 -#define I2C_SR_MAAS 0x40 -#define I2C_SR_MBB 0x20 -#define I2C_SR_MAL 0x10 -#define I2C_SR_BCSTM 0x08 -#define I2C_SR_SRW 0x04 -#define I2C_SR_MIF 0x02 -#define I2C_SR_RXAK 0x01 - u8 res3[3]; - u8 dr; /**< I2C data register */ -#define I2C_DR 0xFF -#define I2C_DR_SHIFT 0 -#define I2C_DR_RES ~(I2C_DR) - u8 res4[3]; - u8 dfsrr; /**< I2C digital filter sampling rate register */ -#define I2C_DFSRR 0x3F -#define I2C_DFSRR_SHIFT 0 -#define I2C_DFSRR_RES ~(I2C_DR) - u8 res5[3]; - u8 res6[0xE8]; -} i2c_t; - -#ifndef CFG_HZ -#error CFG_HZ is not defined in /include/configs/${BOARD}.h -#endif -#define I2C_TIMEOUT (CFG_HZ/4) - -#ifndef CFG_IMMR -#error CFG_IMMR is not defined in /include/configs/${BOARD}.h -#endif - -#ifndef CFG_I2C_OFFSET -#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h -#endif - -#define I2C_1 ((i2c_t*)(CFG_IMMR + CFG_I2C_OFFSET)) - -/* Optional support for second I2C bus */ -#ifdef CFG_I2C2_OFFSET -#define I2C_2 ((i2c_t*)(CFG_IMMR + CFG_I2C2_OFFSET)) -#endif /* CFG_I2C2_OFFSET */ - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#endif /* _ASM_I2C_H_ */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 09e08ba0a4..2a76a05c6c 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -39,7 +39,7 @@ #include #include -#include +#include /* * Local Access Window. @@ -2007,7 +2007,7 @@ typedef struct immap { qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ #endif ddr83xx_t ddr; /* DDR Memory Controller Memory */ - i2c_t i2c[2]; /* I2C1 Controller */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ #if defined (CONFIG_MPC8349) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 4a5b4bc4a7..5bed2d0a29 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -335,6 +335,7 @@ /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c74e63a4d4..8dc96352a1 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -41,14 +41,14 @@ Align. Board Bus Addr Part No. Description Length Location ---------------------------------------------------------------- - I2C1 0x50 M24256-BWMN6P Board EEPROM 2 U64 + I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 - I2C2 0x20 PCF8574 I2C Expander 0 U8 - I2C2 0x21 PCF8574 I2C Expander 0 U10 - I2C2 0x38 PCF8574A I2C Expander 0 U8 - I2C2 0x39 PCF8574A I2C Expander 0 U10 - I2C2 0x51 (DDR) DDR EEPROM 1 U1 - I2C2 0x68 DS1339 RTC 1 U68 + I2C1 0x20 PCF8574 I2C Expander 0 U8 + I2C1 0x21 PCF8574 I2C Expander 0 U10 + I2C1 0x38 PCF8574A I2C Expander 0 U8 + I2C1 0x39 PCF8574A I2C Expander 0 U10 + I2C1 0x51 (DDR) DDR EEPROM 1 U1 + I2C1 0x68 DS1339 RTC 1 U68 Note that a given board has *either* a pair of 8574s or a pair of 8574As. */ @@ -77,19 +77,20 @@ #define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R +#define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 -#define CFG_SPD_BUS_NUM 2 +#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ -#define CFG_I2C_8574_ADDR1 0x20 /* I2C2, PCF8574 */ -#define CFG_I2C_8574_ADDR2 0x21 /* I2C2, PCF8574 */ -#define CFG_I2C_8574A_ADDR1 0x38 /* I2C2, PCF8574A */ -#define CFG_I2C_8574A_ADDR2 0x39 /* I2C2, PCF8574A */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C1, Board EEPROM */ -#define CFG_I2C_RTC_ADDR 0x68 /* I2C2, DS1339 RTC*/ -#define SPD_EEPROM_ADDRESS 0x51 /* I2C2, DDR */ +#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ +#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ +#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ +#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ +#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ +#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -175,6 +176,7 @@ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CFG_FLASH_SIZE 16 /* FLASH size in MB */ +#define CFG_FLASH_EMPTY_INFO #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ @@ -610,7 +612,7 @@ #define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ #define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ -#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C1 clock mode (0-3) */ +#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ /* System IO Config */ @@ -708,6 +710,19 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif +#if 1 +#define CONFIG_IPADDR 10.82.19.159 +#define CONFIG_SERVERIP 10.82.48.106 +#define CONFIG_GATEWAYIP 10.82.19.254 +#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs +#define CONFIG_BOOTFILE timur/uImage + +#define CONFIG_UBOOTPATH timur/u-boot.bin +#else #define CONFIG_IPADDR 192.168.1.253 #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -719,6 +734,8 @@ #define CONFIG_BOOTFILE uImage #define CONFIG_UBOOTPATH u-boot.bin +#endif + #define CONFIG_UBOOTSTART fe700000 #define CONFIG_UBOOTEND fe77ffff diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index a8f2df911e..2ff5f48980 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -330,7 +330,8 @@ /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 0x3F /* I2C speed and slave address */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index b0b0673cff..728083b304 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -218,6 +218,7 @@ extern int tqm834x_num_flash_banks; */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C #define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */ #define CFG_I2C_SLAVE 0x7F /* slave address */ #define CFG_I2C_OFFSET 0x3000 From 91650b3e4de688038d4f71279c44858e3e2c6870 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 6 Nov 2006 17:06:36 +0100 Subject: [PATCH 33/72] Sequential accesses to non-existent memory must be synchronized, at least on G2 cores. This fixes get_ram_size() problems on MPC5200 Rev. B boards. --- board/mcc200/mcc200.c | 19 +++++++++++++++++++ common/memsize.c | 17 +++++++++++++++++ include/common.h | 2 +- 3 files changed, 37 insertions(+), 1 deletion(-) diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 71a691b5db..8b475c690d 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -27,6 +27,7 @@ #include #include #include +#include /* Two MT48LC8M32B2 for 32 MB */ /* #include "mt48lc8m32b2-6-7.h" */ @@ -98,6 +99,7 @@ long int initdram (int board_type) { ulong dramsize = 0; ulong dramsize2 = 0; + uint svr, pvr; #ifndef CFG_RAMBOOT ulong test1, test2; @@ -192,6 +194,23 @@ long int initdram (int board_type) #endif /* CFG_RAMBOOT */ + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + svr = get_svr(); + pvr = get_pvr(); + if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && + (PVR_MIN(pvr) == 4)) { + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + } + return dramsize + dramsize2; } diff --git a/common/memsize.c b/common/memsize.c index dbc812dfc5..6c275c9b25 100644 --- a/common/memsize.c +++ b/common/memsize.c @@ -21,6 +21,16 @@ * MA 02111-1307 USA */ +#include +#ifdef __PPC__ +/* + * At least on G2 PowerPC cores, sequential accesses to non-existent + * memory must be synchronized. + */ +# include /* for sync() */ +#else +# define sync() /* nothing */ +#endif /* * Check memory range for valid RAM. A simple memory test determines @@ -38,20 +48,27 @@ long get_ram_size(volatile long *base, long maxsize) for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { addr = base + cnt; /* pointer arith! */ + sync (); save[i++] = *addr; + sync (); *addr = ~cnt; } addr = base; + sync (); save[i] = *addr; + sync (); *addr = 0; + sync (); if ((val = *addr) != 0) { /* Restore the original data before leaving the function. */ + sync (); *addr = save[i]; for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) { addr = base + cnt; + sync (); *addr = save[--i]; } return (0); diff --git a/include/common.h b/include/common.h index 349d5cf726..ac78d1c001 100644 --- a/include/common.h +++ b/include/common.h @@ -270,7 +270,7 @@ int misc_init_r (void); void jumptable_init(void); /* common/memsize.c */ -int get_ram_size (volatile long *, long); +long get_ram_size (volatile long *, long); /* $(BOARD)/$(BOARD).c */ void reset_phy (void); From 44a47e6db2694841211f1c8fdbafd36992e9cd1a Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Sat, 11 Nov 2006 22:43:00 +0100 Subject: [PATCH 34/72] Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin group is enabled for USB earlier (in cpu_init_f() instead of usb_lowlevel_init()). --- include/configs/v38b.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/v38b.h b/include/configs/v38b.h index cf2d031c9f..deabc1761a 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -246,7 +246,7 @@ /* * GPIO configuration */ -#define CFG_GPS_PORT_CONFIG 0x90000404 +#define CFG_GPS_PORT_CONFIG 0x90001404 /* * Miscellaneous configurable options From ce3f1a40c507afbab06c5eb58ccdc6713eda3245 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Sat, 11 Nov 2006 22:48:22 +0100 Subject: [PATCH 35/72] Disable the watchdog in the default config for the V38B board. --- include/configs/v38b.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/v38b.h b/include/configs/v38b.h index deabc1761a..554a7a41b8 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -34,7 +34,7 @@ #define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ #define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ -#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ +#undef CONFIG_HW_WATCHDOG /* don't use watchdog */ #define CONFIG_NETCONSOLE 1 From b21b511d4c50408f4853f46f06b601272196223f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 12 Nov 2006 21:13:23 +0100 Subject: [PATCH 36/72] Update CHANGELOG --- CHANGELOG | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 6efddd0ddb..2f10ec183a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,68 @@ +commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 +Author: Bartlomiej Sieka +Date: Sat Nov 11 22:48:22 2006 +0100 + + Disable the watchdog in the default config for the V38B board. + +commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a +Author: Bartlomiej Sieka +Date: Sat Nov 11 22:43:00 2006 +0100 + + Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin + group is enabled for USB earlier (in cpu_init_f() instead of + usb_lowlevel_init()). + +commit 91650b3e4de688038d4f71279c44858e3e2c6870 +Author: Wolfgang Denk +Date: Mon Nov 6 17:06:36 2006 +0100 + + Sequential accesses to non-existent memory must be synchronized, + at least on G2 cores. + + This fixes get_ram_size() problems on MPC5200 Rev. B boards. + +commit c59200443072353044aa4bf737a5a60f9a9af231 +Author: Wolfgang Denk +Date: Thu Nov 2 15:15:01 2006 +0100 + + Release U-Boot 1.1.6 + +commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 +Author: Bartlomiej Sieka +Date: Wed Nov 1 02:04:38 2006 +0100 + + Finish up support for MarelV38B board + - add watchdog support + - enable GPIO_WKUP_7 pin for input + - code cleanup + +commit ffa150bc90c943ca265170bd1be3f293674dd5c7 +Author: Bartlomiej Sieka +Date: Wed Nov 1 01:45:46 2006 +0100 + + - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: + * remove warnings when compiling ethaddr.c + * adjust linker script (fixes a crash resulting from incorrect + definition of __u_boot_cmd_start) + - Some MarelV38B code cleanup. + +commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 +Author: Bartlomiej Sieka +Date: Wed Nov 1 01:38:16 2006 +0100 + + - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the + MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's + Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with + MPC5XXX_WU_GPIO_DATA_O for affected boards. + + - Add defintions for some MPC5XXX GPIO pins. + +commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 +Author: Bartlomiej Sieka +Date: Wed Nov 1 01:34:29 2006 +0100 + + Changed MarelV38B board make target to lowercase. Config file cleanup. + commit 1954be6e9c9421b45d0a9d05b10356acc7563150 Author: Wolfgang Denk Date: Sun Oct 29 01:03:51 2006 +0200 From 260421a21e934a68d31fb6125b0fbd2631a8ca20 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 13 Nov 2006 13:55:24 +0100 Subject: [PATCH 37/72] [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] * Adds support for AMD command set Top Boot flash geometry reversal * Adds support for reading JEDEC Manufacturer ID and Device ID * Adds support for displaying command set, manufacturer id and device ids (flinfo) * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined * Removes outdated change history (refer to git log instead) Signed-off-by: Tolunay Orkun Signed-off-by: Stefan Roese --- drivers/cfi_flash.c | 214 ++++++++++++++++++++++++++++++++------------ include/flash.h | 8 +- 2 files changed, 164 insertions(+), 58 deletions(-) diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c index fd0a186828..9b10220fc7 100644 --- a/drivers/cfi_flash.c +++ b/drivers/cfi_flash.c @@ -4,11 +4,12 @@ * * Copyright (C) 2003 Arabella Software Ltd. * Yuli Barcohen - * Modified to work with AMD flashes * * Copyright (C) 2004 * Ed Okerson - * Modified to work with little-endian systems. + * + * Copyright (C) 2006 + * Tolunay Orkun * * See file CREDITS for list of people who contributed to this * project. @@ -28,17 +29,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * - * History - * 01/20/2004 - combined variants of original driver. - * 01/22/2004 - Write performance enhancements for parallel chips (Tolunay) - * 01/23/2004 - Support for x8/x16 chips (Rune Raknerud) - * 01/27/2004 - Little endian support Ed Okerson - * - * Tested Architectures - * Port Width Chip Width # of banks Flash Chip Board - * 32 16 1 28F128J3 seranoa/eagle - * 64 16 1 28F128J3 seranoa/falcon - * */ /* The DEBUG define must be before common to enable debugging */ @@ -54,21 +44,16 @@ * This file implements a Common Flash Interface (CFI) driver for U-Boot. * The width of the port and the width of the chips are determined at initialization. * These widths are used to calculate the address for access CFI data structures. - * It has been tested on an Intel Strataflash implementation and AMD 29F016D. * * References * JEDEC Standard JESD68 - Common Flash Interface (CFI) * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet + * AMD CFI Specification, Release 2.0 December 1, 2001 + * AMD/Spansion Application Note: Migration from Single-byte to Three-byte + * Device IDs, Publication Number 25538 Revision A, November 8, 2001 * - * TODO - * - * Use Primary Extended Query table (PRI) and Alternate Algorithm Query - * Table (ALT) to determine if protection is available - * - * Add support for other command sets Use the PRI and ALT to determine command set - * Verify erase and program timeouts. */ #ifndef CFG_FLASH_BANKS_LIST @@ -114,6 +99,10 @@ #define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555) #define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA) +#define FLASH_OFFSET_MANUFACTURER_ID 0x00 +#define FLASH_OFFSET_DEVICE_ID 0x01 +#define FLASH_OFFSET_DEVICE_ID2 0x0E +#define FLASH_OFFSET_DEVICE_ID3 0x0F #define FLASH_OFFSET_CFI 0x55 #define FLASH_OFFSET_CFI_RESP 0x10 #define FLASH_OFFSET_PRIMARY_VENDOR 0x13 @@ -135,25 +124,20 @@ #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 - -#define FLASH_MAN_CFI 0x01000000 - -#define CFI_CMDSET_NONE 0 -#define CFI_CMDSET_INTEL_EXTENDED 1 -#define CFI_CMDSET_AMD_STANDARD 2 -#define CFI_CMDSET_INTEL_STANDARD 3 -#define CFI_CMDSET_AMD_EXTENDED 4 -#define CFI_CMDSET_MITSU_STANDARD 256 -#define CFI_CMDSET_MITSU_EXTENDED 257 -#define CFI_CMDSET_SST 258 - +#define CFI_CMDSET_NONE 0 +#define CFI_CMDSET_INTEL_EXTENDED 1 +#define CFI_CMDSET_AMD_STANDARD 2 +#define CFI_CMDSET_INTEL_STANDARD 3 +#define CFI_CMDSET_AMD_EXTENDED 4 +#define CFI_CMDSET_MITSU_STANDARD 256 +#define CFI_CMDSET_MITSU_EXTENDED 257 +#define CFI_CMDSET_SST 258 #ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */ # undef FLASH_CMD_RESET -# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */ +# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */ #endif - typedef union { unsigned char c; unsigned short w; @@ -168,7 +152,7 @@ typedef union { volatile unsigned long long *llp; } cfiptr_t; -#define NUM_ERASE_REGIONS 4 +#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */ /* use CFG_MAX_FLASH_BANKS_DETECT if defined */ #ifdef CFG_MAX_FLASH_BANKS_DETECT @@ -200,6 +184,7 @@ static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect); static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); +static void flash_read_jedec_ids (flash_info_t * info); static int flash_detect_cfi (flash_info_t * info); static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword); static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, @@ -307,7 +292,7 @@ ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset) } /*----------------------------------------------------------------------- - * read a long word by picking the least significant byte of each maiximum + * read a long word by picking the least significant byte of each maximum * port size word. Swap for ppc format. */ ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset) @@ -529,14 +514,42 @@ void flash_print_info (flash_info_t * info) (info->portwidth << 3), (info->chipwidth << 3)); printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", + printf (" "); + switch (info->vendor) { + case CFI_CMDSET_INTEL_STANDARD: + printf ("Intel Standard"); + break; + case CFI_CMDSET_INTEL_EXTENDED: + printf ("Intel Extended"); + break; + case CFI_CMDSET_AMD_STANDARD: + printf ("AMD Standard"); + break; + case CFI_CMDSET_AMD_EXTENDED: + printf ("AMD Extended"); + break; + default: + printf ("Unknown (%d)", info->vendor); + break; + } + printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X", + info->manufacturer_id, info->device_id); + if (info->device_id == 0x7E) { + printf("%04X", info->device_id2); + } + printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n", info->erase_blk_tout, - info->write_tout, + info->write_tout); + if (info->buffer_size > 1) { + printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n", info->buffer_write_tout, info->buffer_size); + } - puts (" Sector Start Addresses:"); + puts ("\n Sector Start Addresses:"); for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n"); #ifdef CFG_FLASH_EMPTY_INFO int k; int size; @@ -560,18 +573,15 @@ void flash_print_info (flash_info_t * info) } } - if ((i % 5) == 0) - printf ("\n"); /* print empty and read-only info */ - printf (" %08lX%s%s", + printf (" %08lX %c %s ", info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); + erased ? 'E' : ' ', + info->protect[i] ? "RO" : " "); #else /* ! CFG_FLASH_EMPTY_INFO */ - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); + printf (" %08lX %s ", + info->start[i], + info->protect[i] ? "RO" : " "); #endif } putc ('\n'); @@ -1070,6 +1080,55 @@ static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uc return retval; } +/*----------------------------------------------------------------------- + * read jedec ids from device and set corresponding fields in info struct + * + * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct + * +*/ +static void flash_read_jedec_ids (flash_info_t * info) +{ + info->manufacturer_id = 0; + info->device_id = 0; + info->device_id2 = 0; + + switch (info->vendor) { + case CFI_CMDSET_INTEL_STANDARD: + case CFI_CMDSET_INTEL_EXTENDED: + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); + udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, + FLASH_OFFSET_MANUFACTURER_ID); + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + break; + case CFI_CMDSET_AMD_STANDARD: + case CFI_CMDSET_AMD_EXTENDED: + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + flash_unlock_seq(info, 0); + flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID); + udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, + FLASH_OFFSET_MANUFACTURER_ID); + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + break; + default: + break; + } +} + /*----------------------------------------------------------------------- * detect if flash is compatible with the Common Flash Interface (CFI) * http://www.jedec.org/download/search/jesd68.pdf @@ -1120,15 +1179,31 @@ ulong flash_get_size (ulong base, int banknum) uchar num_erase_regions; int erase_region_size; int erase_region_count; + int geometry_reversed = 0; + + info->ext_addr = 0; + info->cfi_version = 0; #ifdef CFG_FLASH_PROTECTION - int ext_addr; info->legacy_unlock = 0; #endif info->start[0] = base; if (flash_detect_cfi (info)) { - info->vendor = flash_read_ushort (info, 0, FLASH_OFFSET_PRIMARY_VENDOR); + info->vendor = flash_read_ushort (info, 0, + FLASH_OFFSET_PRIMARY_VENDOR); + flash_read_jedec_ids (info); + flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); + num_erase_regions = flash_read_uchar (info, + FLASH_OFFSET_NUM_ERASE_REGIONS); + info->ext_addr = flash_read_ushort (info, 0, + FLASH_OFFSET_EXT_QUERY_T_P_ADDR); + if (info->ext_addr) { + info->cfi_version = (ushort) flash_read_uchar (info, + info->ext_addr + 3) << 8; + info->cfi_version |= (ushort) flash_read_uchar (info, + info->ext_addr + 4); + } #ifdef DEBUG flash_printqry (info, 0); #endif @@ -1139,26 +1214,46 @@ ulong flash_get_size (ulong base, int banknum) info->cmd_reset = FLASH_CMD_RESET; #ifdef CFG_FLASH_PROTECTION /* read legacy lock/unlock bit from intel flash */ - ext_addr = flash_read_ushort (info, 0, - FLASH_OFFSET_EXT_QUERY_T_P_ADDR); - info->legacy_unlock = - flash_read_uchar (info, ext_addr + 5) & 0x08; + if (info->ext_addr) { + info->legacy_unlock = flash_read_uchar (info, + info->ext_addr + 5) & 0x08; + } #endif break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: info->cmd_reset = AMD_CMD_RESET; + /* check if flash geometry needs reversal */ + if (num_erase_regions <= 1) + break; + /* reverse geometry if top boot part */ + if (info->cfi_version < 0x3131) { + /* CFI < 1.1, try to guess from device id */ + if ((info->device_id & 0x80) != 0) { + geometry_reversed = 1; + } + break; + } + /* CFI >= 1.1, deduct from top/bottom flag */ + /* note: ext_addr is valid since cfi_version > 0 */ + if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { + geometry_reversed = 1; + } break; } debug ("manufacturer is %d\n", info->vendor); + debug ("manufacturer id is 0x%x\n", info->manufacturer_id); + debug ("device id is 0x%x\n", info->device_id); + debug ("device id2 is 0x%x\n", info->device_id2); + debug ("cfi version is 0x%04x\n", info->cfi_version); + size_ratio = info->portwidth / info->chipwidth; /* if the chip is x8/x16 reduce the ratio by half */ if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) { size_ratio >>= 1; } - num_erase_regions = flash_read_uchar (info, FLASH_OFFSET_NUM_ERASE_REGIONS); debug ("size_ratio %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); @@ -1171,7 +1266,12 @@ ulong flash_get_size (ulong base, int banknum) num_erase_regions, NUM_ERASE_REGIONS); break; } - tmp = flash_read_long (info, 0, + if (geometry_reversed) + tmp = flash_read_long (info, 0, + FLASH_OFFSET_ERASE_REGIONS + + (num_erase_regions - 1 - i) * 4); + else + tmp = flash_read_long (info, 0, FLASH_OFFSET_ERASE_REGIONS + i * 4); erase_region_size = diff --git a/include/flash.h b/include/flash.h index d91589a6c0..9c57cbc427 100644 --- a/include/flash.h +++ b/include/flash.h @@ -43,9 +43,14 @@ typedef struct { ulong write_tout; /* maximum write timeout */ ulong buffer_write_tout; /* maximum buffer write timeout */ ushort vendor; /* the primary vendor id */ - ushort cmd_reset; /* Vendor specific reset command */ + ushort cmd_reset; /* vendor specific reset command */ ushort interface; /* used for x8/x16 adjustments */ ushort legacy_unlock; /* support Intel legacy (un)locking */ + uchar manufacturer_id; /* manufacturer id */ + ushort device_id; /* device id */ + ushort device_id2; /* extended device id */ + ushort ext_addr; /* extended query table address */ + ushort cfi_version; /* cfi version */ #endif } flash_info_t; @@ -439,6 +444,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_MAN_MT 0x00400000 #define FLASH_MAN_SHARP 0x00500000 #define FLASH_MAN_ATM 0x00600000 +#define FLASH_MAN_CFI 0x01000000 #define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */ From e4bbd8da164b976d38616bd9c69c5e86e193cdf0 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 20 Nov 2006 10:28:30 +0100 Subject: [PATCH 38/72] Update CHANGELOG --- CHANGELOG | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 2f10ec183a..e2be1cb838 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,25 @@ +commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 +Author: Stefan Roese +Date: Mon Nov 13 13:55:24 2006 +0100 + + [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] + + * Adds support for AMD command set Top Boot flash geometry reversal + * Adds support for reading JEDEC Manufacturer ID and Device ID + * Adds support for displaying command set, manufacturer id and + device ids (flinfo) + * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined + * Removes outdated change history (refer to git log instead) + + Signed-off-by: Tolunay Orkun + Signed-off-by: Stefan Roese + +commit b21b511d4c50408f4853f46f06b601272196223f +Author: Wolfgang Denk +Date: Sun Nov 12 21:13:23 2006 +0100 + + Update CHANGELOG + commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 Author: Bartlomiej Sieka Date: Sat Nov 11 22:48:22 2006 +0100 From 4ef6251403f637841000e0fef9e832aa01339822 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 20 Nov 2006 20:39:52 +0100 Subject: [PATCH 39/72] [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 3a76315b44..1a460cde06 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -53,7 +53,7 @@ #define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ #define CFG_OCM_BASE 0xe0010000 /* ocm */ @@ -234,10 +234,10 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_4xx\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ "bootfile=/tftpboot/sequoia/uImage\0" \ - "kernel_addr=FE000000\0" \ - "ramdisk_addr=FE180000\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 100000 FFFA0000 60000\0" \ @@ -378,7 +378,7 @@ #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03017300 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000) +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) /* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 @@ -387,7 +387,7 @@ #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ /* Memory Bank 3 (NOR-FLASH) initialization */ #define CFG_EBC_PB3AP 0x03017300 -#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000) +#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) /* Memory Bank 0 (NAND-FLASH) initialization */ #define CFG_EBC_PB0AP 0x018003c0 From 2053283304eeddf250d109e6791eb6fa4cad14f7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 22 Nov 2006 13:20:50 +0100 Subject: [PATCH 40/72] [PATCH] PPC4xx start.S: Fix for processor errata Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx errata 1.12: 440_33 by moving patch up in code. Signed-off-by: Jeff Mann Signed-off-by: Stefan Roese --- cpu/ppc4xx/start.S | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 3fe13daaf3..8e000d3092 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -204,6 +204,18 @@ _start_440: mfspr r1,mcsr mtspr mcsr,r1 #endif + + /*----------------------------------------------------------------*/ + /* CCR0 init */ + /*----------------------------------------------------------------*/ + /* Disable store gathering & broadcast, guarantee inst/data + * cache block touch, force load/store alignment + * (see errata 1.12: 440_33) + */ + lis r1,0x0030 /* store gathering & broadcast disable */ + ori r1,r1,0x6000 /* cache touch */ + mtspr ccr0,r1 + /*----------------------------------------------------------------*/ /* Initialize debug */ /*----------------------------------------------------------------*/ @@ -225,17 +237,6 @@ _start_440: mtspr dbsr,r1 /* Clear all valid bits */ skip_debug_init: - /*----------------------------------------------------------------*/ - /* CCR0 init */ - /*----------------------------------------------------------------*/ - /* Disable store gathering & broadcast, guarantee inst/data - * cache block touch, force load/store alignment - * (see errata 1.12: 440_33) - */ - lis r1,0x0030 /* store gathering & broadcast disable */ - ori r1,r1,0x6000 /* cache touch */ - mtspr ccr0,r1 - #if defined (CONFIG_440SPE) /*----------------------------------------------------------------+ | Initialize Core Configuration Reg1. From 78d620ebb5871d252270dedfad60c6568993b780 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 23 Nov 2006 22:58:58 +0100 Subject: [PATCH 41/72] Updates for TQM5200 modules: - fix off-by-one error in board/tqm5200/cam5200_flash.c error message - simplify "udate" definitions --- board/tqm5200/cam5200_flash.c | 2 +- board/tqm5200/tqm5200.c | 2 +- include/configs/TQM5200.h | 46 +++++++++-------------------------- 3 files changed, 13 insertions(+), 37 deletions(-) diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c index 1a40633e56..8c3f62e398 100644 --- a/board/tqm5200/cam5200_flash.c +++ b/board/tqm5200/cam5200_flash.c @@ -759,7 +759,7 @@ unsigned long flash_init(void) if (flash_info[i].flash_id == FLASH_UNKNOWN) { printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i] << 20); + i+1, size_b[i], size_b[i] << 20); flash_info[i].sector_count = -1; flash_info[i].size = 0; } diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index cb57a5e269..a4322b6661 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -289,7 +289,7 @@ int checkboard (void) #elif defined(CONFIG_TB5200) # define CARRIER_NAME "TB5200" #elif defined(CONFIG_CAM5200) -# define CARRIER_NAME "Cam5200" +# define CARRIER_NAME "CAM5200" #elif defined(CONFIG_FO300) # define CARRIER_NAME "FO300" #else diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 4bae103e09..08674ca49f 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -217,43 +217,19 @@ #undef CONFIG_BOOTARGS -#ifdef CONFIG_STK52XX -# if defined(CONFIG_TQM5200_B) -# if defined(CFG_LOWBOOT) -# define ENV_UPDT \ - "update=protect off FC000000 FC07FFFF;" \ - "erase FC000000 FC07FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC07FFFF\0" -# else /* highboot */ -# define ENV_UPDT \ - "update=protect off FFF00000 FFF7FFFF;" \ - "erase FFF00000 FFF7FFFF;" \ +#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FFF00000 +${filesize};" \ + "erase FFF00000 +${filesize};" \ "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 FFF7FFFF\0" -# endif /* CFG_LOWBOOT */ -# else /* !CONFIG_TQM5200_B */ -# define ENV_UPDT \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" -# endif /* CONFIG_TQM5200_B */ -#elif defined (CONFIG_CAM5200) + "protect on FFF00000 +${filesize}\0" +#else /* default lowboot configuration */ # define ENV_UPDT \ - "update=protect off FC000000 FC03FFFF;" \ - "erase FC000000 FC03FFFF;" \ + "update=protect off FC000000 +${filesize};" \ + "erase FC000000 +${filesize};" \ "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC03FFFF\0" -#elif defined (CONFIG_FO300) -# define ENV_UPDT \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" -#else -# error "Unknown Carrier Board" -#endif /* CONFIG_STK52XX */ + "protect on FC000000 +${filesize}\0" +#endif #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -432,7 +408,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ -#if defined(CONFIG_TQM5200_B) +#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) #define CFG_ENV_SECT_SIZE 0x40000 #else #define CFG_ENV_SECT_SIZE 0x20000 From 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 14:12:17 +0100 Subject: [PATCH 42/72] [PATCH] Update Prodrive ALPR board support (440GX) Signed-off-by: Stefan Roese --- board/prodrive/alpr/Makefile | 4 +- board/prodrive/alpr/alpr.c | 100 +++++++++++++++++++++++++---------- board/prodrive/alpr/fpga.c | 79 +++++++++++++-------------- board/prodrive/alpr/init.S | 1 - board/prodrive/alpr/nand.c | 16 +++--- cpu/ppc4xx/4xx_enet.c | 5 +- cpu/ppc4xx/cpu.c | 4 +- cpu/ppc4xx/cpu_init.c | 4 ++ include/configs/alpr.h | 96 ++++++++++++++++----------------- 9 files changed, 171 insertions(+), 138 deletions(-) diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile index 1024a41a07..00dc180bbd 100644 --- a/board/prodrive/alpr/Makefile +++ b/board/prodrive/alpr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o fpga.o nand.o +COBJS = $(BOARD).o fpga.o nand.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index e8435bf63c..2389561271 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -26,6 +26,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -33,24 +34,14 @@ extern int alpr_fpga_init(void); int board_early_init_f (void) { - unsigned long mfr; - - /*-------------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------------*/ -#if 0 - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | - EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | - EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); -#else + /*------------------------------------------------------------------------- + * Initialize EBC CONFIG + *-------------------------------------------------------------------------*/ mtebc(xbcfg, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); -#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -58,8 +49,8 @@ int board_early_init_f (void) mtdcr (uic0sr, 0xffffffff); /* clear all */ mtdcr (uic0er, 0x00000000); /* disable all */ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */ + mtdcr (uic0pr, 0xfffffe03); /* per manual */ + mtdcr (uic0tr, 0x01c00000); /* per manual */ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ mtdcr (uic0sr, 0xffffffff); /* clear all */ @@ -85,12 +76,57 @@ int board_early_init_f (void) mtdcr (uicb0pr, 0xfc000000); /* */ mtdcr (uicb0tr, 0x00000000); /* */ mtdcr (uicb0vr, 0x00000001); /* */ - mfsdr (sdr_mfr, mfr); - mfr &= ~SDR0_MFR_ECS_MASK; + + /* Setup GPIO/IRQ multiplexing */ + mtsdr(sdr_pfc0, 0x01a03e00); return 0; } +int last_stage_init(void) +{ + unsigned short reg; + + /* + * Configure LED's of both Marvell 88E1111 PHY's + * + * This has to be done after the 4xx ethernet driver is loaded, + * so "last_stage_init()" is the right place. + */ + miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®); + reg |= 0x0001; + miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg); + miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®); + reg |= 0x0001; + miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg); + + return 0; +} + +static int board_rev(void) +{ + int rev; + u32 pfc0; + + /* Setup GPIO14 & 15 as GPIO */ + mfsdr(sdr_pfc0, pfc0); + pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1; + mtsdr(sdr_pfc0, pfc0); + + /* Setup as input */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); + + rev = (in32(GPIO0_IR) >> 16) & 0x3; + + /* Setup GPIO14 & 15 as non GPIO again */ + mfsdr(sdr_pfc0, pfc0); + pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1); + mtsdr(sdr_pfc0, pfc0); + + return rev; +} + int checkboard (void) { char *s = getenv ("serial#"); @@ -100,7 +136,7 @@ int checkboard (void) puts (", serial# "); puts (s); } - putc ('\n'); + printf(" (Rev. %d)\n", board_rev()); return (0); } @@ -224,10 +260,26 @@ void pci_target_init(struct pci_controller * hose ) * ************************************************************************/ #if defined(CONFIG_PCI) + +static void wait_for_pci_ready(void) +{ + /* + * Configure EREADY as input + */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY); + udelay(1000); + + for (;;) { + if (in32(GPIO0_IR) & CFG_GPIO_EREADY) + return; + } + +} + int is_pci_host(struct pci_controller *hose) { - /* The ocotea board is always configured as host. */ - return(1); + wait_for_pci_ready(); + return 1; /* return 1 for host controller */ } #endif /* defined(CONFIG_PCI) */ @@ -274,11 +326,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -void board_reset(void) -{ - /* - * Initiate chip reset in debug control register DBCR - */ - mtspr(dbcr0, 0x20000000); -} diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c index 78307b486b..e94360f814 100644 --- a/board/prodrive/alpr/fpga.c +++ b/board/prodrive/alpr/fpga.c @@ -36,7 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_FPGA) +#if defined(CONFIG_FPGA) #ifdef FPGA_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) @@ -44,46 +44,38 @@ DECLARE_GLOBAL_DATA_PTR; #define PRINTF(fmt,args...) #endif -static unsigned long regval; +static unsigned long regval; -#define SET_GPIO_REG_0(reg, bit) {\ - regval = in32(reg);\ - regval &= ~(0x80000000 >> bit);\ - out32(reg, regval);\ - } +#define SET_GPIO_REG_0(reg, bit) { \ + regval = in32(reg); \ + regval &= ~(0x80000000 >> bit); \ + out32(reg, regval); \ + } -#define SET_GPIO_REG_1(reg, bit) {\ - regval = in32(reg);\ - regval |= (0x80000000 >> bit);\ - out32(reg, regval);\ - } +#define SET_GPIO_REG_1(reg, bit) { \ + regval = in32(reg); \ + regval |= (0x80000000 >> bit); \ + out32(reg, regval); \ + } -#define GPIO_CLK_PIN 0x00002000 -#define GPIO_CLK_PIN_I 0xffffdfff -#define GPIO_DAT_PIN 0x00001000 -#define GPIO_DAT_PIN_I 0xffffefff -#define GPIO_CLKDAT_PIN_I 0xffffcfff +#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) +#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) -#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I); -#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN); -#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I); -#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN); +#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN) +#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG) +#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA) +#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK) +#define OLD_VAL (FPGA_PRG | FPGA_CONFIG) -#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) -#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) +#define SET_FPGA(data) out32(GPIO0_OR, data) -#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN); -#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I); +#define FPGA_WRITE_1 { \ + SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ -#define FPGA_WRITE_1 { \ - SET_GPIO_CLK_0_Z1\ - SET_GPIO_CLK_1} - -#define FPGA_WRITE_0 { \ - SET_GPIO_CLK_0_Z0\ - SET_GPIO_CLK_1} - -#define P_GP(reg) (reg & 0x00023f00) +#define FPGA_WRITE_0 { \ + SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */ /* Plattforminitializations */ /* Here we have to set the FPGA Chain */ @@ -102,7 +94,7 @@ int fpga_pre_fn (int cookie) SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR); SET_GPIO_0((CFG_GPIO_SEL_DPR)); - /* initialize the GPIO Pins */ + /* initialize the GPIO Pins */ /* output */ SET_GPIO_0(CFG_GPIO_CLK); SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK); @@ -174,7 +166,7 @@ int fpga_done_fn (int cookie) } /* writes the complete buffer to the FPGA - writing the complete buffer in one function is very faster, + writing the complete buffer in one function is much faster, then calling it for every bit */ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) { @@ -182,14 +174,10 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) unsigned char *data = (unsigned char *) buf; unsigned char val=0; int i; + int len_40 = len / 40; while (bytecount < len) { -#ifdef CFG_FPGA_CHECK_CTRLC - if (ctrlc ()) { - return FPGA_FAIL; - } -#endif - val = data[bytecount ++ ]; + val = data[bytecount++]; i = 8; do { if (val & 0x01) { @@ -202,8 +190,13 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) } while (i > 0); #ifdef CFG_FPGA_PROG_FEEDBACK - if (bytecount % (len / 40) == 0) + if (bytecount % len_40 == 0) { putc ('.'); /* let them know we are alive */ +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) + return FPGA_FAIL; +#endif + } #endif } return FPGA_SUCCESS; diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S index 1baa609c05..135674c26a 100644 --- a/board/prodrive/alpr/init.S +++ b/board/prodrive/alpr/init.S @@ -34,7 +34,6 @@ #define SZ_64K 0x00000030 #define SZ_256K 0x00000040 #define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 #define SZ_16M 0x00000070 #define SZ_256M 0x00000090 diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index 20a8098307..e63c921eff 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -32,19 +32,19 @@ #include struct alpr_ndfc_regs { - u16 cmd[4]; - u16 addr_wait; - u16 term; - u16 dummy; - u16 dummy2; - u16 data; + u8 cmd[4]; + u8 addr_wait; + u8 term; + u8 dummy; + u8 dummy2; + u8 data; }; static u8 hwctl; static struct alpr_ndfc_regs *alpr_ndfc = NULL; -#define readb(addr) (u8)(*(volatile u16 *)(addr)) -#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d)) +#define readb(addr) (u8)(*(volatile u8 *)(addr)) +#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d)) /* * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 81d49ffdfe..8c517baf3b 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -470,8 +470,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #else if ((devnum == 0) || (devnum == 1)) { out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); - } - else { /* ((devnum == 2) || (devnum == 3)) */ + } else { /* ((devnum == 2) || (devnum == 3)) */ out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | (RGMII_FER_RGMII << RGMII_FER_V (3)))); @@ -808,7 +807,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; hw_p->rx_ready[i] = -1; #if 0 - printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr); + printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr); #endif } diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index faa5257504..c45525db00 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -426,8 +426,8 @@ int ppc440spe_revB() { int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { -#if defined(CONFIG_BOARD_RESET) - board_reset(); +#if defined(CFG_4xx_RESET_TYPE) + mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28); #else /* * Initiate system reset in debug control register DBCR diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index def46f15ca..4b746b072e 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -320,6 +320,10 @@ cpu_init_f (void) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ #else val |= 0xf0000000; /* generate system reset after 2.684 seconds */ +#endif +#if defined(CFG_4xx_RESET_TYPE) + val &= ~0x30000000; /* clear WRC bits */ + val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */ #endif mtspr(tcr, val); diff --git a/include/configs/alpr.h b/include/configs/alpr.h index c6731ba4d7..60da820283 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -31,25 +31,25 @@ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_BOARD_RESET 1 /* call board_reset() */ +#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ -#define CONFIG_SYS_CLK_FREQ 33333000 /* external freq to pll */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */ -#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ -#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ -#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ -#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 -#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 -#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ +#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 #define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000) @@ -84,26 +84,13 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ - +#define CFG_FLASH_CFI 1 /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ -#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ -#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ - +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ @@ -154,7 +141,7 @@ #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ + "netdev=eth3\0" \ "hostname=alpr\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ @@ -162,18 +149,19 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \ + "mem=193M\0" \ "flash_nfs=run nfsargs addip addtty;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_4xx\0" \ - "bootfile=/tftpboot/alpr/uImage\0" \ + "rootpath=/opt/projects/alpr/nfs_root\0" \ + "bootfile=/alpr/uImage\0" \ "kernel_addr=fff00000\0" \ "ramdisk_addr=fff10000\0" \ - "load=tftp 100000 /tftpboot/alpr/u-boot.bin\0" \ + "load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ @@ -181,7 +169,7 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ #define CONFIG_BAUDRATE 115200 @@ -192,8 +180,8 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */ #define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */ -#define CONFIG_PHY2_ADDR 0x00 /* test-only: will be changed */ -#define CONFIG_PHY3_ADDR 0x01 /* PHY address for EMAC3 */ +#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */ +#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */ #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 @@ -251,9 +239,11 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ /*----------------------------------------------------------------------- * PCI stuff @@ -264,7 +254,7 @@ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ -#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ +#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ /* Board-specific PCI */ #define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ @@ -276,11 +266,10 @@ /*----------------------------------------------------------------------- * FPGA stuff - *----------------------------------------------------------------------- - */ + *-----------------------------------------------------------------------*/ #define CONFIG_FPGA CFG_ALTERA_CYCLON2 -#undef CFG_FPGA_CHECK_CTRLC -#undef CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_CHECK_CTRLC +#define CFG_FPGA_PROG_FEEDBACK #define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in Reihe geschaltet -> sollte gehen, aufpassen mit Datasize ist jetzt @@ -299,9 +288,16 @@ #define CFG_GPIO_SEL_AVR 15 /* cpu output */ #define CFG_GPIO_PROG_EN 23 /* cpu output */ -/* +/*----------------------------------------------------------------------- + * Definitions for GPIO setup + *-----------------------------------------------------------------------*/ +#define CFG_GPIO_EREADY (0x80000000 >> 26) +#define CFG_GPIO_REV0 (0x80000000 >> 14) +#define CFG_GPIO_REV1 (0x80000000 >> 15) + +/*----------------------------------------------------------------------- * NAND-FLASH stuff - */ + *-----------------------------------------------------------------------*/ #define CFG_MAX_NAND_DEVICE 4 #define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ @@ -320,7 +316,7 @@ /* Memory Bank 1 (NAND-FLASH) initialization */ #define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */ -#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ +#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */ /* * For booting Linux, the board info and command line data @@ -333,9 +329,7 @@ */ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif /* * Internal Definitions From ec0c2ec725aec9524a177a77ce75559e644a931a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 14:46:06 +0100 Subject: [PATCH 43/72] [PATCH] Remove testing 4xx enet PHY setup Signed-off-by: Stefan Roese --- cpu/ppc4xx/4xx_enet.c | 17 +---------------- include/configs/alpr.h | 2 +- 2 files changed, 2 insertions(+), 17 deletions(-) diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 8c517baf3b..7a2483c3cd 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -560,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { -#if defined(CONFIG_88E1111_CLK_DELAY) - /* - * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs - * the "RGMII transmit timing control" and "RGMII receive - * timing control" bits set, so that Gbit communication works - * without problems. - * Also set the "Transmitter disable" to 1 to enable the - * transmitter. - * After setting these bits a soft-reset must occur for this - * change to become active. - */ - miiphy_read (dev->name, reg, 0x14, ®_short); - reg_short |= (1 << 7) | (1 << 1) | (1 << 0); - miiphy_write (dev->name, reg, 0x14, reg_short); -#endif -#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */ +#if defined(CONFIG_M88E1111_PHY) miiphy_write (dev->name, reg, 0x14, 0x0ce3); miiphy_write (dev->name, reg, 0x18, 0x4101); miiphy_write (dev->name, reg, 0x09, 0x0e00); diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 60da820283..bbe6b76bff 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -187,7 +187,7 @@ #define CONFIG_HAS_ETH2 #define CONFIG_HAS_ETH3 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_88E1111_CLK_DELAY 1 /* set CLK delay on ALPR */ +#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ From 1f94d162e2b5f0edc28d9fb11482502c44d218e1 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 14:48:41 +0100 Subject: [PATCH 44/72] [PATCH] 4xx: Fix problem with board specific reset code Signed-off-by: Stefan Roese --- cpu/ppc4xx/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index c45525db00..87299c1ec0 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -426,6 +426,9 @@ int ppc440spe_revB() { int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#if defined(CONFIG_BOARD_RESET) + board_reset(); +#else /* defined(CONFIG_BOARD_RESET) */ #if defined(CFG_4xx_RESET_TYPE) mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28); #else From cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 14:49:51 +0100 Subject: [PATCH 45/72] [PATCH] alpr: remove unused board specific flash driver Signed-off-by: Stefan Roese --- board/prodrive/alpr/flash.c | 70 ------------------------------------- 1 file changed, 70 deletions(-) delete mode 100644 board/prodrive/alpr/flash.c diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c deleted file mode 100644 index 8fa008430a..0000000000 --- a/board/prodrive/alpr/flash.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/* - * Prototypes - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); - -unsigned long flash_init(void) -{ - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i=0; i Date: Mon, 27 Nov 2006 14:52:04 +0100 Subject: [PATCH 46/72] [PATCH] 4xx: Fix problem with board specific reset code (now for real) Signed-off-by: Stefan Roese --- cpu/ppc4xx/cpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 87299c1ec0..447383f8d3 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -428,7 +428,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { #if defined(CONFIG_BOARD_RESET) board_reset(); -#else /* defined(CONFIG_BOARD_RESET) */ +#else #if defined(CFG_4xx_RESET_TYPE) mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28); #else @@ -436,6 +436,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * Initiate system reset in debug control register DBCR */ mtspr(dbcr0, 0x30000000); +#endif /* defined(CFG_4xx_RESET_TYPE) */ #endif /* defined(CONFIG_BOARD_RESET) */ return 1; From a9398e018593782c5fa7d0741955fc1256b34c1e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 27 Nov 2006 15:32:42 +0100 Subject: [PATCH 47/72] Minor code cleanup. Update CHANGELOG. --- CHANGELOG | 34 ++++++++++++++++++++++++++++++++++ README | 12 ++++++------ board/mcc200/mcc200.c | 3 +-- 3 files changed, 41 insertions(+), 8 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e2be1cb838..441fe16c2a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,37 @@ +commit 78d620ebb5871d252270dedfad60c6568993b780 +Author: Wolfgang Denk +Date: Thu Nov 23 22:58:58 2006 +0100 + + Updates for TQM5200 modules: + - fix off-by-one error in board/tqm5200/cam5200_flash.c error message + - simplify "udate" definitions + +commit 2053283304eeddf250d109e6791eb6fa4cad14f7 +Author: Stefan Roese +Date: Wed Nov 22 13:20:50 2006 +0100 + + [PATCH] PPC4xx start.S: Fix for processor errata + + Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx + errata 1.12: 440_33 by moving patch up in code. + + Signed-off-by: Jeff Mann + Signed-off-by: Stefan Roese + +commit 4ef6251403f637841000e0fef9e832aa01339822 +Author: Stefan Roese +Date: Mon Nov 20 20:39:52 2006 +0100 + + [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH + + Signed-off-by: Stefan Roese + +commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 +Author: Wolfgang Denk +Date: Mon Nov 20 10:28:30 2006 +0100 + + Update CHANGELOG + commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 Author: Stefan Roese Date: Mon Nov 13 13:55:24 2006 +0100 diff --git a/README b/README index b78ea6124d..f78bf50523 100644 --- a/README +++ b/README @@ -1470,8 +1470,8 @@ The following options need to be configured: Enable auto completion of commands using TAB. - Note that this feature has NOT been implemented yet - for the "hush" shell. + Note that this feature has NOT been implemented yet + for the "hush" shell. CFG_HUSH_PARSER @@ -3114,11 +3114,11 @@ loadaddr=200000 oftaddr=0x300000 => bootm $loadaddr - $oftaddr ## Booting image at 00200000 ... - Image Name: Linux-2.6.17-dirty - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 1029343 Bytes = 1005.2 kB + Image Name: Linux-2.6.17-dirty + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 1029343 Bytes = 1005.2 kB Load Address: 00000000 - Entry Point: 00000000 + Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using flat device tree at 0x300000 diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 8b475c690d..5d74bdeb42 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -205,8 +205,7 @@ long int initdram (int board_type) */ svr = get_svr(); pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && - (PVR_MIN(pvr) == 4)) { + if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; __asm__ volatile ("sync"); } From da5553b095bf04f4f109ad7e565dae3aba47b230 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 17:04:06 +0100 Subject: [PATCH 48/72] [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely Acked-by: Jon Loeliger --- common/cmd_bootm.c | 56 +++++++++++++++++++--------------------------- 1 file changed, 23 insertions(+), 33 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 3091a58897..7aae8a6d1b 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -833,10 +833,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, printf ("ERROR: flat device tree size does not agree with image\n"); return; } - - } else if (getenv("disable_of") == NULL) { - printf ("ERROR: bootm needs flat device tree as third argument\n"); - return; } #endif if (!data) { @@ -913,23 +909,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, SHOW_BOOT_PROGRESS (15); -#ifndef CONFIG_OF_FLAT_TREE - #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) unlock_ram_in_cache(); #endif - /* - * Linux Kernel Parameters: - * r3: ptr to board info data - * r4: initrd_start or 0 if no initrd - * r5: initrd_end - unused if r4 is 0 - * r6: Start of command line string - * r7: End of command line string - */ - (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); - -#else /* CONFIG_OF_FLAT_TREE */ +#ifdef CONFIG_OF_FLAT_TREE /* move of_flat_tree if needed */ if (of_data) { ulong of_start, of_len; @@ -948,30 +932,36 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, of_start, of_start + of_len - 1); memmove ((void *)of_start, (void *)of_data, of_len); } - - ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); - /* ft_dump_blob(of_flat_tree); */ - -#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) - unlock_ram_in_cache(); #endif + /* - * Linux Kernel Parameters: + * Linux Kernel Parameters (passing board info data): + * r3: ptr to board info data + * r4: initrd_start or 0 if no initrd + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + */ +#ifdef CONFIG_OF_FLAT_TREE + if (!of_flat_tree) /* no device tree; boot old style */ +#endif + (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + /* does not return */ + +#ifdef CONFIG_OF_FLAT_TREE + /* + * Linux Kernel Parameters (passing device tree): * r3: ptr to OF flat tree, followed by the board info data * r4: physical pointer to the kernel itself * r5: NULL * r6: NULL * r7: NULL */ - if (getenv("disable_of") != NULL) - (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, - cmd_start, cmd_end); - else { - ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); - /* ft_dump_blob(of_flat_tree); */ - (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); - } -#endif /* CONFIG_OF_FLAT_TREE */ + ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); + /* ft_dump_blob(of_flat_tree); */ + + (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); +#endif } #endif /* CONFIG_PPC */ From 15784862857c3c2214498defcfed84ff137fb81e Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 17:22:19 +0100 Subject: [PATCH 49/72] [PATCH] nand_wait() timeout fixes Two fixes for the nand_wait() function in drivers/nand/nand_base.c: 1. Use correct timeouts. The original timeouts in Linux source are 400ms and 20ms not 40s and 20s 2. Return correct error value in case of timeout. 0 is interpreted as OK. Signed-off-by: Rui Sousa Signed-off-by: Stefan Roese --- drivers/nand/nand_base.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index b7a5d32fb3..8237f4a8b3 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -838,9 +838,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) unsigned long timeo; if (state == FL_ERASING) - timeo = CFG_HZ * 400; + timeo += (HZ * 400) / 1000; else - timeo = CFG_HZ * 20; + timeo += (HZ * 20) / 1000; if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); @@ -852,8 +852,8 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) while (1) { if (get_timer(0) > timeo) { printf("Timeout!"); - return 0; - } + return 0x01; + } if (this->dev_ready) { if (this->dev_ready(mtd)) From d1a72545296800b7e219f93104ad5836f0003d66 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 17:34:10 +0100 Subject: [PATCH 50/72] [PATCH] Select NAND embedded environment from board configuration The current NAND Bootloader setup forces the environment variables to be in line with the bootloader. This change enables the configuration to be made in the board include file instead so that it can be individually enabled. Signed-off-by: Nick Spence Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 1 + include/environment.h | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 1a460cde06..00b92220c1 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -102,6 +102,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- diff --git a/include/environment.h b/include/environment.h index 26b07120da..af605ab7a9 100644 --- a/include/environment.h +++ b/include/environment.h @@ -79,8 +79,7 @@ # ifdef CFG_ENV_OFFSET_REDUND # define CFG_REDUNDAND_ENVIRONMENT # endif -# if defined(CONFIG_NAND_U_BOOT) -/* Use embedded environment in NAND boot versions */ +# ifdef CFG_ENV_IS_EMBEDDED # define ENV_IS_EMBEDDED 1 # endif #endif /* CFG_ENV_IS_IN_NAND */ From f6e495f54cdb8fe340b9c03deab40ad746d52fae Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 27 Nov 2006 17:43:25 +0100 Subject: [PATCH 51/72] [PATCH] 4xx_enet.c: Correct the setting of zmiifer register Patch below corrects the setting of the zmiifer register, it was overwritting the register rather than ORing the settings. Signed-off-by: Neil Wilson Signed-off-by: Stefan Roese --- cpu/ppc4xx/4xx_enet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 81d49ffdfe..aefe126fd2 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -264,10 +264,10 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; case 2: - zmiifer = ZMII_FER_SMII << ZMII_FER_V(0); - zmiifer = ZMII_FER_SMII << ZMII_FER_V(1); - zmiifer = ZMII_FER_SMII << ZMII_FER_V(2); - zmiifer = ZMII_FER_SMII << ZMII_FER_V(3); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; From 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 27 Nov 2006 22:53:53 +0100 Subject: [PATCH 52/72] Update CHANGELOG --- CHANGELOG | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 441fe16c2a..e0766b77ce 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,66 @@ +commit f6e495f54cdb8fe340b9c03deab40ad746d52fae +Author: Stefan Roese +Date: Mon Nov 27 17:43:25 2006 +0100 + + [PATCH] 4xx_enet.c: Correct the setting of zmiifer register + + Patch below corrects the setting of the zmiifer register, it was + overwritting the register rather than ORing the settings. + + Signed-off-by: Neil Wilson + Signed-off-by: Stefan Roese + +commit d1a72545296800b7e219f93104ad5836f0003d66 +Author: Stefan Roese +Date: Mon Nov 27 17:34:10 2006 +0100 + + [PATCH] Select NAND embedded environment from board configuration + + The current NAND Bootloader setup forces the environment + variables to be in line with the bootloader. This change + enables the configuration to be made in the board include + file instead so that it can be individually enabled. + + Signed-off-by: Nick Spence + Signed-off-by: Stefan Roese + +commit 15784862857c3c2214498defcfed84ff137fb81e +Author: Stefan Roese +Date: Mon Nov 27 17:22:19 2006 +0100 + + [PATCH] nand_wait() timeout fixes + + Two fixes for the nand_wait() function in + drivers/nand/nand_base.c: + + 1. Use correct timeouts. The original timeouts in Linux + source are 400ms and 20ms not 40s and 20s + + 2. Return correct error value in case of timeout. 0 is + interpreted as OK. + + Signed-off-by: Rui Sousa + Signed-off-by: Stefan Roese + +commit da5553b095bf04f4f109ad7e565dae3aba47b230 +Author: Stefan Roese +Date: Mon Nov 27 17:04:06 2006 +0100 + + [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel + + This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 + arguments to bootm. It removes the getenv("disable_of") test that used + to be used for this purpose. + + Signed-off-by: Grant Likely + Acked-by: Jon Loeliger + +commit a9398e018593782c5fa7d0741955fc1256b34c1e +Author: Wolfgang Denk +Date: Mon Nov 27 15:32:42 2006 +0100 + + Minor code cleanup. Update CHANGELOG. + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk Date: Thu Nov 23 22:58:58 2006 +0100 From e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 28 Nov 2006 11:04:45 +0100 Subject: [PATCH 53/72] [PATCH] nand: Fix patch merge problem Signed-off-by: Stefan Roese --- drivers/nand/nand_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index 2e3fcdf5ab..421550b151 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -838,9 +838,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) unsigned long timeo; if (state == FL_ERASING) - timeo += (HZ * 400) / 1000; + timeo = (CFG_HZ * 400) / 1000; else - timeo += (HZ * 20) / 1000; + timeo = (CFG_HZ * 20) / 1000; if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); From e732faec95a83cb468b4850ae807c8301dde8f6a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 28 Nov 2006 16:09:24 +0100 Subject: [PATCH 54/72] [PATCH] PPC4xx: 440SP Rev. C detection added Signed-off-by: Stefan Roese --- cpu/ppc4xx/cpu.c | 4 ++++ include/asm-ppc/processor.h | 1 + 2 files changed, 5 insertions(+) diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 447383f8d3..9c5c9109b1 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -340,6 +340,10 @@ int checkcpu (void) puts("SP Rev. B"); break; + case PVR_440SP_RC: + puts("SP Rev. C"); + break; + case PVR_440SPe_RA: puts("SPe Rev. A"); break; diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 388dea430c..6619686876 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -749,6 +749,7 @@ #define PVR_405EP_RB 0x51210950 #define PVR_440SP_RA 0x53221850 #define PVR_440SP_RB 0x53221891 +#define PVR_440SP_RC 0x53221892 #define PVR_440SPe_RA 0x53421890 #define PVR_440SPe_RB 0x53421891 #define PVR_601 0x00010000 From e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 28 Nov 2006 17:55:49 +0100 Subject: [PATCH 55/72] [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. This patch adds the code and configuration necessary to boot with an arch/powerpc Linux kernel. Signed-off-by: Grant Likely Acked-by: Jon Loeliger --- board/icecube/icecube.c | 12 ++++++++++++ cpu/mpc5xxx/cpu.c | 28 ++++++++++++++++++++++++++++ include/configs/IceCube.h | 13 +++++++++++++ 3 files changed, 53 insertions(+) diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index f958b32dbd..ddad1bbb9e 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -29,6 +29,10 @@ #include #include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif + #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" #else @@ -332,3 +336,11 @@ void ide_set_reset (int idereset) } } #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 6b6f8282cf..20e6735de4 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -31,6 +31,10 @@ #include #include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif + DECLARE_GLOBAL_DATA_PTR; int checkcpu (void) @@ -102,3 +106,27 @@ unsigned long get_tbclk (void) } /* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_cpu_setup(void *blob, bd_t *bd) +{ + u32 *p; + ulong clock; + int len; + + clock = bd->bi_busfreq; + p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enetaddr, 6); + +} +#endif diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 1152f838d9..0d3825413e 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -172,6 +172,19 @@ #undef CFG_IPBSPEED_133 /* define for 133MHz speed */ #endif #endif /* CONFIG_MPC5200 */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + /* * I2C configuration */ From e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 28 Nov 2006 12:09:35 -0600 Subject: [PATCH 56/72] mpc83xx: Miscellaneous code style fixes Implement various code style fixes and similar changes. Signed-off-by: Timur Tabi --- board/mpc8349itx/mpc8349itx.c | 2 +- common/cmd_i2c.c | 205 +++++++++++++--------------------- cpu/mpc83xx/cpu.c | 5 - cpu/mpc83xx/cpu_init.c | 5 - cpu/mpc83xx/interrupts.c | 7 -- cpu/mpc83xx/spd_sdram.c | 74 +++++------- cpu/mpc83xx/speed.c | 10 -- cpu/mpc83xx/traps.c | 18 +-- 8 files changed, 108 insertions(+), 218 deletions(-) diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 097bb370e7..4838e707f0 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -349,7 +349,7 @@ int misc_init_r(void) u8 i2c_data; #ifdef CFG_I2C_RTC_ADDR - char ds1339_data[17]; + u8 ds1339_data[17]; #endif #ifdef CFG_I2C_EEPROM_ADDR diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 62378af8a2..45cfde2eb8 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -174,7 +174,7 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ addr = simple_strtoul(argv[2], NULL, 16); alen = 1; - for(j = 0; j < 8; j++) { + for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; if (alen > 4) { @@ -182,9 +182,8 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } break; - } else if (argv[2][j] == '\0') { + } else if (argv[2][j] == '\0') break; - } } /* @@ -208,9 +207,9 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; - if(i2c_read(chip, addr, alen, linebuf, linebytes) != 0) { + if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0) puts ("Error reading the chip.\n"); - } else { + else { printf("%04x:", addr); cp = linebuf; for (j=0; j 4) { + if (alen > 4) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } break; - } else if (argv[2][j] == '\0') { + } else if (argv[2][j] == '\0') break; - } } /* @@ -300,16 +298,14 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* * Optional count */ - if(argc == 5) { + if (argc == 5) count = simple_strtoul(argv[4], NULL, 16); - } else { + else count = 1; - } while (count-- > 0) { - if(i2c_write(chip, addr++, alen, &byte, 1) != 0) { + if (i2c_write(chip, addr++, alen, &byte, 1) != 0) puts ("Error writing the chip.\n"); - } /* * Wait for the write to complete. The write can take * up to 10mSec (we allow a little more time). @@ -326,9 +322,9 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif #if 0 - for(timeout = 0; timeout < 10; timeout++) { + for (timeout = 0; timeout < 10; timeout++) { udelay(2000); - if(i2c_probe(chip) == 0) + if (i2c_probe(chip) == 0) break; } #endif @@ -369,17 +365,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ addr = simple_strtoul(argv[2], NULL, 16); alen = 1; - for(j = 0; j < 8; j++) { + for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if(alen > 4) { + if (alen > 4) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } break; - } else if (argv[2][j] == '\0') { + } else if (argv[2][j] == '\0') break; - } } /* @@ -394,19 +389,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ crc = 0; err = 0; - while(count-- > 0) { - if(i2c_read(chip, addr, alen, &byte, 1) != 0) { + while (count-- > 0) { + if (i2c_read(chip, addr, alen, &byte, 1) != 0) err++; - } crc = crc32 (crc, &byte, 1); addr++; } - if(err > 0) - { + if (err > 0) puts ("Error reading the chip,\n"); - } else { + else printf ("%08lx\n", crc); - } return 0; } @@ -464,17 +456,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) */ addr = simple_strtoul(argv[2], NULL, 16); alen = 1; - for(j = 0; j < 8; j++) { + for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if(alen > 4) { + if (alen > 4) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } break; - } else if (argv[2][j] == '\0') { + } else if (argv[2][j] == '\0') break; - } } } @@ -484,17 +475,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) */ do { printf("%08lx:", addr); - if(i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) { + if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) puts ("\nError reading the chip,\n"); - } else { + else { data = cpu_to_be32(data); - if(size == 1) { + if (size == 1) printf(" %02lx", (data >> 24) & 0x000000FF); - } else if(size == 2) { + else if (size == 2) printf(" %04lx", (data >> 16) & 0x0000FFFF); - } else { + else printf(" %08lx", data); - } } nbytes = readline (" ? "); @@ -511,19 +501,17 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) #endif } #ifdef CONFIG_BOOT_RETRY_TIME - else if (nbytes == -2) { + else if (nbytes == -2) break; /* timed out, exit the command */ - } #endif else { char *endp; data = simple_strtoul(console_buffer, &endp, 16); - if(size == 1) { + if (size == 1) data = data << 24; - } else if(size == 2) { + else if (size == 2) data = data << 16; - } data = be32_to_cpu(data); nbytes = endp - console_buffer; if (nbytes) { @@ -533,9 +521,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) */ reset_cmd_timeout(); #endif - if(i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) { + if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) puts ("Error writing the chip.\n"); - } #ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); #endif @@ -565,13 +552,11 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif /* NOPROBES */ puts ("Valid chip addresses:"); - for(j = 0; j < 128; j++) { + for (j = 0; j < 128; j++) { #if defined(CFG_I2C_NOPROBES) skip = 0; - for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) - { - if(COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) - { + for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { + if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) { skip = 1; break; } @@ -579,17 +564,15 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (skip) continue; #endif - if(i2c_probe(j) == 0) { + if (i2c_probe(j) == 0) printf(" %02X", j); - } } putc ('\n'); #if defined(CFG_I2C_NOPROBES) puts ("Excluded chip addresses:"); - for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) - { - if(COMPARE_BUS(bus,k)) + for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { + if (COMPARE_BUS(bus,k)) printf(" %02X", NO_PROBE_ADDR(k)); } putc ('\n'); @@ -630,7 +613,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ addr = simple_strtoul(argv[2], NULL, 16); alen = 1; - for(j = 0; j < 8; j++) { + for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; if (alen > 4) { @@ -638,9 +621,8 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } break; - } else if (argv[2][j] == '\0') { + } else if (argv[2][j] == '\0') break; - } } /* @@ -648,24 +630,21 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ length = 1; length = simple_strtoul(argv[3], NULL, 16); - if(length > sizeof(bytes)) { + if (length > sizeof(bytes)) length = sizeof(bytes); - } /* * The delay time (uSec) is optional. */ delay = 1000; - if (argc > 3) { + if (argc > 3) delay = simple_strtoul(argv[4], NULL, 10); - } /* * Run the loop... */ - while(1) { - if(i2c_read(chip, addr, alen, bytes, length) != 0) { + while (1) { + if (i2c_read(chip, addr, alen, bytes, length) != 0) puts ("Error reading the chip.\n"); - } udelay(delay); } @@ -700,7 +679,7 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ chip = simple_strtoul(argv[1], NULL, 16); - if(i2c_read(chip, 0, 1, data, sizeof(data)) != 0) { + if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) { puts ("No SDRAM Serial Presence Detect found.\n"); return 1; } @@ -709,7 +688,7 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (j = 0; j < 63; j++) { cksum += data[j]; } - if(cksum != data[63]) { + if (cksum != data[63]) { printf ("WARNING: Configuration data checksum failure:\n" " is 0x%02x, calculated 0x%02x\n", data[63], cksum); @@ -725,17 +704,15 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) default: puts ("unknown\n"); break; } puts ("Row address bits "); - if((data[3] & 0x00F0) == 0) { + if ((data[3] & 0x00F0) == 0) printf("%d\n", data[3] & 0x0F); - } else { + else printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F); - } puts ("Column address bits "); - if((data[4] & 0x00F0) == 0) { + if ((data[4] & 0x00F0) == 0) printf("%d\n", data[4] & 0x0F); - } else { + else printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F); - } printf("Module rows %d\n", data[5]); printf("Module data width %d bits\n", (data[7] << 8) | data[6]); puts ("Interface signal levels "); @@ -758,11 +735,10 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) case 2: puts ("ECC\n"); break; default: puts ("unknown\n"); break; } - if((data[12] & 0x80) == 0) { + if ((data[12] & 0x80) == 0) puts ("No self refresh, rate "); - } else { + else puts ("Self refresh, rate "); - } switch(data[12] & 0x7F) { case 0: puts ("15.625uS\n"); break; case 1: puts ("3.9uS\n"); break; @@ -773,17 +749,16 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) default: puts ("unknown\n"); break; } printf("SDRAM width (primary) %d\n", data[13] & 0x7F); - if((data[13] & 0x80) != 0) { + if ((data[13] & 0x80) != 0) { printf(" (second bank) %d\n", 2 * (data[13] & 0x7F)); } - if(data[14] != 0) { + if (data[14] != 0) { printf("EDC width %d\n", data[14] & 0x7F); - if((data[14] & 0x80) != 0) { + if ((data[14] & 0x80) != 0) printf(" (second bank) %d\n", 2 * (data[14] & 0x7F)); - } } printf("Min clock delay, back-to-back random column addresses %d\n", data[15]); @@ -881,18 +856,18 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) (data[35] & 0x80) ? '-' : '+', (data[35] >> 4) & 0x07, data[35] & 0x0F); puts ("Manufacturer's JEDEC ID "); - for(j = 64; j <= 71; j++) + for (j = 64; j <= 71; j++) printf("%02X ", data[j]); putc ('\n'); printf("Manufacturing Location %02X\n", data[72]); puts ("Manufacturer's Part Number "); - for(j = 73; j <= 90; j++) + for (j = 73; j <= 90; j++) printf("%02X ", data[j]); putc ('\n'); printf("Revision Code %02X %02X\n", data[91], data[92]); printf("Manufacturing Date %02X %02X\n", data[93], data[94]); puts ("Assembly Serial Number "); - for(j = 95; j <= 98; j++) + for (j = 95; j <= 98; j++) printf("%02X ", data[j]); putc ('\n'); printf("Speed rating PC%d\n", @@ -908,19 +883,15 @@ int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { int bus_idx, ret=0; - if (argc == 1) /* querying current setting */ - { + if (argc == 1) + /* querying current setting */ printf("Current bus is %d\n", i2c_get_bus_num()); - } - else - { + else { bus_idx = simple_strtoul(argv[1], NULL, 10); printf("Setting bus to %d\n", bus_idx); ret = i2c_set_bus_num(bus_idx); - if(ret) - { + if (ret) printf("Failure changing bus number (%d)\n", ret); - } } return ret; } @@ -930,19 +901,15 @@ int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { int speed, ret=0; - if (argc == 1) /* querying current speed */ - { + if (argc == 1) + /* querying current speed */ printf("Current bus speed=%d\n", i2c_get_bus_speed()); - } - else - { + else { speed = simple_strtoul(argv[1], NULL, 10); printf("Setting bus speed to %d Hz\n", speed); ret = i2c_set_bus_speed(speed); - if(ret) - { + if (ret) printf("Failure changing bus speed (%d)\n", ret); - } } return ret; } @@ -950,53 +917,31 @@ int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { #if defined(CONFIG_I2C_MULTI_BUS) - if(!strncmp(argv[1], "de", 2)) - { + if (!strncmp(argv[1], "de", 2)) return do_i2c_bus_num(cmdtp, flag, --argc, ++argv); - } #endif /* CONFIG_I2C_MULTI_BUS */ - if(!strncmp(argv[1], "sp", 2)) - { + if (!strncmp(argv[1], "sp", 2)) return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "md", 2)) - { + if (!strncmp(argv[1], "md", 2)) return do_i2c_md(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "mm", 2)) - { + if (!strncmp(argv[1], "mm", 2)) return do_i2c_mm(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "mw", 2)) - { + if (!strncmp(argv[1], "mw", 2)) return do_i2c_mw(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "nm", 2)) - { + if (!strncmp(argv[1], "nm", 2)) return do_i2c_nm(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "cr", 2)) - { + if (!strncmp(argv[1], "cr", 2)) return do_i2c_crc(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "pr", 2)) - { + if (!strncmp(argv[1], "pr", 2)) return do_i2c_probe(cmdtp, flag, --argc, ++argv); - } - if(!strncmp(argv[1], "lo", 2)) - { + if (!strncmp(argv[1], "lo", 2)) return do_i2c_loop(cmdtp, flag, --argc, ++argv); - } #if (CONFIG_COMMANDS & CFG_CMD_SDRAM) - if(!strncmp(argv[1], "sd", 2)) - { + if (!strncmp(argv[1], "sd", 2)) return do_sdram(cmdtp, flag, --argc, ++argv); - } #endif /* CFG_CMD_SDRAM */ else - { printf ("Usage:\n%s\n", cmdtp->usage); - } return 0; } #endif /* CONFIG_I2C_CMD_TREE */ diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 1d169bab22..1b5107881e 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -18,11 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) */ /* diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 4f80f4a094..e5725fb91d 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -18,11 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) */ #include diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c index 98fccff227..bb1fe1af3f 100644 --- a/cpu/mpc83xx/interrupts.c +++ b/cpu/mpc83xx/interrupts.c @@ -21,13 +21,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00 - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) */ #include diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index dc8f6790a6..cfc42c4a83 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -25,15 +25,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) - * 20060601: Dave Liu (daveliu@freescale.com) - * DDR ECC support - * unify variable names for 83xx - * code cleanup */ #include @@ -45,6 +36,8 @@ #ifdef CONFIG_SPD_EEPROM +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); @@ -58,19 +51,16 @@ extern int dma_xfer(void *dest, uint count, void *src); /* * Convert picoseconds into clock cycles (rounding up if needed). */ -extern ulong get_ddr_clk(ulong dummy); - int picos_to_clk(int picos) { unsigned int ddr_bus_clk; int clks; - ddr_bus_clk = get_ddr_clk(0) >> 1; + ddr_bus_clk = gd->ddr_clk >> 1; clks = picos / ((1000000000 / ddr_bus_clk) * 1000); - if (picos % ((1000000000 / ddr_bus_clk) * 1000) !=0) { + if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0) clks++; - } return clks; } @@ -249,7 +239,7 @@ long int spd_sdram() debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - ddrc_clk = get_ddr_clk(0) / 1000000; + ddrc_clk = gd->ddr_clk / 1000000; if (max_data_rate >= 390) { /* it is DDR 400 */ if (ddrc_clk <= 410 && ddrc_clk > 350) { @@ -259,31 +249,28 @@ long int spd_sdram() } else if (ddrc_clk <= 350 && ddrc_clk > 280) { /* DDR controller clk at 280~350 */ effective_data_rate = 333; /* 6ns */ - if (spd.clk_cycle2 == 0x60) { + if (spd.clk_cycle2 == 0x60) caslat = caslat - 1; - } else { + else caslat = caslat; - } } else if (ddrc_clk <= 280 && ddrc_clk > 230) { /* DDR controller clk at 230~280 */ effective_data_rate = 266; /* 7.5ns */ - if (spd.clk_cycle3 == 0x75) { + if (spd.clk_cycle3 == 0x75) caslat = caslat - 2; - } else if (spd.clk_cycle2 == 0x60) { + else if (spd.clk_cycle2 == 0x60) caslat = caslat - 1; - } else { + else caslat = caslat; - } } else if (ddrc_clk <= 230 && ddrc_clk > 90) { /* DDR controller clk at 90~230 */ effective_data_rate = 200; /* 10ns */ - if (spd.clk_cycle3 == 0x75) { + if (spd.clk_cycle3 == 0x75) caslat = caslat - 2; - } else if (spd.clk_cycle2 == 0x60) { + else if (spd.clk_cycle2 == 0x60) caslat = caslat - 1; - } else { + else caslat = caslat; - } } } else if (max_data_rate >= 323) { /* it is DDR 333 */ if (ddrc_clk <= 350 && ddrc_clk > 280) { @@ -293,21 +280,19 @@ long int spd_sdram() } else if (ddrc_clk <= 280 && ddrc_clk > 230) { /* DDR controller clk at 230~280 */ effective_data_rate = 266; /* 7.5ns */ - if (spd.clk_cycle2 == 0x75) { + if (spd.clk_cycle2 == 0x75) caslat = caslat - 1; - } else { + else caslat = caslat; - } } else if (ddrc_clk <= 230 && ddrc_clk > 90) { /* DDR controller clk at 90~230 */ effective_data_rate = 200; /* 10ns */ - if (spd.clk_cycle3 == 0xa0) { + if (spd.clk_cycle3 == 0xa0) caslat = caslat - 2; - } else if (spd.clk_cycle2 == 0x75) { + else if (spd.clk_cycle2 == 0x75) caslat = caslat - 1; - } else { + else caslat = caslat; - } } } else if (max_data_rate >= 256) { /* it is DDR 266 */ if (ddrc_clk <= 350 && ddrc_clk > 280) { @@ -322,9 +307,8 @@ long int spd_sdram() } else if (ddrc_clk <= 230 && ddrc_clk > 90) { /* DDR controller clk at 90~230 */ effective_data_rate = 200; /* 10ns */ - if (spd.clk_cycle2 == 0xa0) { + if (spd.clk_cycle2 == 0xa0) caslat = caslat - 1; - } } } else if (max_data_rate >= 190) { /* it is DDR 200 */ if (ddrc_clk <= 350 && ddrc_clk > 230) { @@ -346,13 +330,13 @@ long int spd_sdram() * Errata DDR6 work around: input enable 2 cycles earlier. * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2. */ - if (caslat == 2) { + if (caslat == 2) ddr->debug_reg = 0x201c0000; /* CL=2 */ - } else if (caslat == 3) { + else if (caslat == 3) ddr->debug_reg = 0x202c0000; /* CL=2.5 */ - } else if (caslat == 4) { + else if (caslat == 4) ddr->debug_reg = 0x202c0000; /* CL=3.0 */ - } + __asm__ __volatile__ ("sync"); debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg); @@ -392,11 +376,10 @@ long int spd_sdram() } /* Is this an ECC DDR chip? */ - if (spd.config == 0x02) { + if (spd.config == 0x02) printf(" with ECC\n"); - } else { + else printf(" without ECC\n"); - } /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential @@ -482,14 +465,13 @@ long int spd_sdram() sdram_cfg = 0xC2000000; /* sdram_cfg[3] = RD_EN - registered DIMM enable */ - if (spd.mod_attr & 0x02) { + if (spd.mod_attr & 0x02) sdram_cfg |= 0x10000000; - } /* The DIMM is 32bit width */ - if (spd.dataw_lsb == 0x20) { + if (spd.dataw_lsb == 0x20) sdram_cfg |= 0x000C0000; - } + ddrc_ecc_enable = 0; #if defined(CONFIG_DDR_ECC) diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 213e7180a7..7e53b1e606 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -21,11 +21,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) */ #include @@ -343,11 +338,6 @@ int get_clocks(void) } -ulong get_ddr_clk(ulong dummy) -{ - return gd->ddr_clk; -} - /******************************************** * get_bus_freq * return system bus freq in Hz diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c index 44345afbfa..152fa73561 100644 --- a/cpu/mpc83xx/traps.c +++ b/cpu/mpc83xx/traps.c @@ -1,5 +1,8 @@ /* - * linux/arch/ppc/kernel/traps.c + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -15,19 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * Change log: - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * 20050101: Eran Liberty (liberty@freescale.com) - * Initial file creating (porting from 85XX & 8260) */ /* From 1aa934c81b77f2080d3ca4b226eab67b17a33961 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 28 Nov 2006 23:28:33 -0600 Subject: [PATCH 57/72] Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src since they are passed by reference to ucc_get_cmxucr_reg and assigned. --- drivers/qe/uccf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c index 25f74826c0..013aa543db 100644 --- a/drivers/qe/uccf.c +++ b/drivers/qe/uccf.c @@ -100,9 +100,9 @@ static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) { - volatile u32 *p_cmxucr; - u8 reg_num; - u8 shift; + volatile u32 *p_cmxucr = NULL; + u8 reg_num = 0; + u8 shift = 0; u32 clockBits; u32 clockMask; int source = -1; From cf3d045e51ca8dcc6cf759827140861d6ac25c04 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 28 Nov 2006 23:31:19 -0600 Subject: [PATCH 58/72] Assign maintainers for mpc8349emds and mpc8360emds Dave for mpc8360emds, and me for mpc8349emds. --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index aaa0825090..a423f22c66 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -343,6 +343,14 @@ Timur Tabi MPC8349E-mITX MPC8349 +Kim Phillips + + MPC8349EMDS MPC8349 + +Dave Liu + + MPC8360EMDS MPC8360 + ------------------------------------------------------------------------- Unknown / orphaned boards: From 14198bf768fdc958e3c1afd2404e5262208e98d7 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 28 Nov 2006 16:17:18 -0600 Subject: [PATCH 59/72] Fix I2C master address initialization. Signed-off-by: Timur Tabi --- drivers/fsl_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c index 0e39213487..f00e8026bc 100644 --- a/drivers/fsl_i2c.c +++ b/drivers/fsl_i2c.c @@ -57,7 +57,7 @@ i2c_init(int speed, int slaveadd) writeb(0, &dev->cr); /* stop I2C controller */ writeb(0x3F, &dev->fdr); /* set bus speed */ writeb(0x3F, &dev->dfsrr); /* set default filter */ - writeb(slaveadd, &dev->adr); /* write slave address */ + writeb(slaveadd << 1, &dev->adr); /* write slave address */ writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ From 1939d969443ccf316cab2bf32ab1027d4db5ba1a Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 28 Nov 2006 16:17:27 -0600 Subject: [PATCH 60/72] Make fsl-i2c not conflict with SOFT I2C Signed-off-by: Timur Tabi --- drivers/fsl_i2c.c | 17 ++++++++++------- include/asm-ppc/fsl_i2c.h | 4 ---- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c index f00e8026bc..c92909608a 100644 --- a/drivers/fsl_i2c.c +++ b/drivers/fsl_i2c.c @@ -29,6 +29,9 @@ #define I2C_TIMEOUT (CFG_HZ / 4) +#define I2C_READ_BIT 1 +#define I2C_WRITE_BIT 0 + /* Initialize the bus pointer to whatever one the SPD EEPROM is on. * Default is bus 0. This is necessary because the DDR initialization * runs from ROM, and we can't switch buses because we can't modify @@ -110,7 +113,7 @@ i2c_wait(int write) return -1; } - if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) { + if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) { debug("i2c_wait: No RXACK\n"); return -1; } @@ -131,7 +134,7 @@ i2c_write_addr (u8 dev, u8 dir, int rsta) writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr); - if (i2c_wait(I2C_WRITE) < 0) + if (i2c_wait(I2C_WRITE_BIT) < 0) return 0; return 1; @@ -148,7 +151,7 @@ __i2c_write(u8 *data, int length) for (i = 0; i < length; i++) { writeb(data[i], &i2c_dev[i2c_bus_num]->dr); - if (i2c_wait(I2C_WRITE) < 0) + if (i2c_wait(I2C_WRITE_BIT) < 0) break; } @@ -167,7 +170,7 @@ __i2c_read(u8 *data, int length) readb(&i2c_dev[i2c_bus_num]->dr); for (i = 0; i < length; i++) { - if (i2c_wait(I2C_READ) < 0) + if (i2c_wait(I2C_READ_BIT) < 0) break; /* Generate ack on last next to last byte */ @@ -192,9 +195,9 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) u8 *a = (u8*)&addr; if (i2c_wait4bus() >= 0 - && i2c_write_addr(dev, I2C_WRITE, 0) != 0 + && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 && __i2c_write(&a[4 - alen], alen) == alen - && i2c_write_addr(dev, I2C_READ, 1) != 0) { + && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) { i = __i2c_read(data, length); } @@ -213,7 +216,7 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) u8 *a = (u8*)&addr; if (i2c_wait4bus() >= 0 - && i2c_write_addr(dev, I2C_WRITE, 0) != 0 + && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 && __i2c_write(&a[4 - alen], alen) == alen) { i = __i2c_write(data, length); } diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h index 76b1c4309b..4f71341327 100644 --- a/include/asm-ppc/fsl_i2c.h +++ b/include/asm-ppc/fsl_i2c.h @@ -83,8 +83,4 @@ typedef struct fsl_i2c { u8 res6[0xE8]; } fsl_i2c_t; - -#define I2C_READ 1 -#define I2C_WRITE 0 - #endif /* _ASM_I2C_H_ */ From 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Nov 2006 12:03:57 +0100 Subject: [PATCH 61/72] [PATCH] include/ppc440.h minor error affecting interrupts Fixed include/ppc440.c for UIC address Bug Corrects bug affecting the addresses for the universal interrupt controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. Signed-off-by: Jeff Mann Signed-off-by: Stefan Roese --- include/ppc440.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/include/ppc440.h b/include/ppc440.h index 407daaebe8..50f4ec403b 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1350,26 +1350,26 @@ #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define UIC2_DCR_BASE 0xe0 -#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ -#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ -#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */ -#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */ -#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */ -#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */ -#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */ -#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */ -#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */ +#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ +#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ +#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ +#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ +#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ +#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ +#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ +#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ #define UIC3_DCR_BASE 0xf0 -#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */ -#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */ -#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */ -#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */ -#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */ -#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */ -#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */ -#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */ -#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */ +#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ +#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ +#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ +#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ +#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ +#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ +#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ +#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ #endif /* CONFIG_440SPE */ #if defined(CONFIG_440GX) From 1bdd46832aeb569f5e04b1f20f64318525b6525a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Nov 2006 12:53:15 +0100 Subject: [PATCH 62/72] [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command In the bootvx command the load address was only read from the env variable "loadaddr" and not optionally passed as paramter as described in the help. This is fixed with this patch. The behaviour is now the same as in the bootelf command. Signed-off-by: Stefan Roese --- common/cmd_elf.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 1d92bb37d3..0e3d56f6bb 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -79,7 +79,7 @@ int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * be either an ELF image or a raw binary. Will attempt to setup the * bootline and other parameters correctly. * ====================================================================== */ -int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { unsigned long addr; /* Address of image */ unsigned long bootaddr; /* Address to put the bootline */ @@ -96,12 +96,10 @@ int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * If we don't know where the image is then we're done. */ - if ((tmp = getenv ("loadaddr")) != NULL) { - addr = simple_strtoul (tmp, NULL, 16); - } else { - puts ("No load address provided\n"); - return 1; - } + if (argc < 2) + addr = load_addr; + else + addr = simple_strtoul (argv[1], NULL, 16); #if (CONFIG_COMMANDS & CFG_CMD_NET) /* Check to see if we need to tftp the image ourselves before starting */ From 1eac2a71417b6675b11aace72102a2e7fde8f5c6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Nov 2006 15:42:37 +0100 Subject: [PATCH 63/72] [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese --- MAINTAINERS | 4 + MAKEALL | 5 +- Makefile | 10 + board/prodrive/p3mx/64460.h | 52 + board/prodrive/p3mx/Makefile | 55 + board/prodrive/p3mx/config.mk | 28 + board/prodrive/p3mx/eth.h | 43 + board/prodrive/p3mx/misc.S | 245 ++ board/prodrive/p3mx/mpsc.c | 1013 +++++++++ board/prodrive/p3mx/mpsc.h | 156 ++ board/prodrive/p3mx/mv_eth.c | 3418 ++++++++++++++++++++++++++++ board/prodrive/p3mx/mv_eth.h | 840 +++++++ board/prodrive/p3mx/mv_regs.h | 1125 +++++++++ board/prodrive/p3mx/p3mx.c | 809 +++++++ board/prodrive/p3mx/pci.c | 1025 +++++++++ board/prodrive/p3mx/ppc_error_no.h | 164 ++ board/prodrive/p3mx/sdram_init.c | 433 ++++ board/prodrive/p3mx/serial.c | 107 + board/prodrive/p3mx/serial.h | 89 + board/prodrive/p3mx/u-boot.lds | 138 ++ cpu/74xx_7xx/cpu.c | 8 + cpu/74xx_7xx/cpu_init.c | 1 + cpu/74xx_7xx/speed.c | 1 + cpu/74xx_7xx/start.S | 8 +- include/74xx_7xx.h | 1 + include/configs/p3mx.h | 450 ++++ net/eth.c | 7 +- 27 files changed, 10225 insertions(+), 10 deletions(-) create mode 100644 board/prodrive/p3mx/64460.h create mode 100644 board/prodrive/p3mx/Makefile create mode 100644 board/prodrive/p3mx/config.mk create mode 100644 board/prodrive/p3mx/eth.h create mode 100644 board/prodrive/p3mx/misc.S create mode 100644 board/prodrive/p3mx/mpsc.c create mode 100644 board/prodrive/p3mx/mpsc.h create mode 100644 board/prodrive/p3mx/mv_eth.c create mode 100644 board/prodrive/p3mx/mv_eth.h create mode 100644 board/prodrive/p3mx/mv_regs.h create mode 100644 board/prodrive/p3mx/p3mx.c create mode 100644 board/prodrive/p3mx/pci.c create mode 100644 board/prodrive/p3mx/ppc_error_no.h create mode 100644 board/prodrive/p3mx/sdram_init.c create mode 100644 board/prodrive/p3mx/serial.c create mode 100644 board/prodrive/p3mx/serial.h create mode 100644 board/prodrive/p3mx/u-boot.lds create mode 100644 include/configs/p3mx.h diff --git a/MAINTAINERS b/MAINTAINERS index d4539671f9..df0f567397 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -277,6 +277,8 @@ Daniel Poirot Stefan Roese + P3M7448 MPC7448 + uc100 MPC857 TQM85xx MPC8540/8541/8555/8560 @@ -294,6 +296,8 @@ Stefan Roese yellowstone PPC440GR yosemite PPC440EP + P3M750 PPC750FX/GX/GL + Yusdi Santoso HIDDEN_DRAGON MPC8241/MPC8245 diff --git a/MAKEALL b/MAKEALL index 84a708a983..a3d026a5b1 100755 --- a/MAKEALL +++ b/MAKEALL @@ -151,11 +151,12 @@ LIST_85xx=" \ LIST_74xx=" \ DB64360 DB64460 EVB64260 P3G4 \ - PCIPPC2 PCIPPC6 ZUMA \ + p3m7448 PCIPPC2 PCIPPC6 ZUMA \ " LIST_7xx=" \ - BAB7xx CPCI750 ELPPC ppmc7xx \ + BAB7xx CPCI750 ELPPC p3m750 \ + ppmc7xx \ " LIST_ppc="${LIST_5xx} ${LIST_5xxx} \ diff --git a/Makefile b/Makefile index 37d782dee2..69e1e559dc 100644 --- a/Makefile +++ b/Makefile @@ -1724,6 +1724,16 @@ EVB64260_750CX_config: unconfig P3G4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 +p3m750_config \ +p3m7448_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 750_,$@)" ] ; then \ + echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ + else \ + echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ + fi + @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive + PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 diff --git a/board/prodrive/p3mx/64460.h b/board/prodrive/p3mx/64460.h new file mode 100644 index 0000000000..8bb0ebfd21 --- /dev/null +++ b/board/prodrive/p3mx/64460.h @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * main board support/init for the Galileo Eval board DB64460. + */ + +#ifndef __64460_H__ +#define __64460_H__ + +/* CPU Configuration bits */ +#define CPU_CONF_ADDR_MISS_EN (1 << 8) +#define CPU_CONF_SINGLE_CPU (1 << 11) +#define CPU_CONF_ENDIANESS (1 << 12) +#define CPU_CONF_PIPELINE (1 << 13) +#define CPU_CONF_STOP_RETRY (1 << 17) +#define CPU_CONF_MULTI_DECODE (1 << 18) +#define CPU_CONF_DP_VALID (1 << 19) +#define CPU_CONF_PERR_PROP (1 << 22) +#define CPU_CONF_AACK_DELAY_2 (1 << 25) +#define CPU_CONF_AP_VALID (1 << 26) +#define CPU_CONF_REMAP_WR_DIS (1 << 27) + +/* CPU Master Control bits */ +#define CPU_MAST_CTL_ARB_EN (1 << 8) +#define CPU_MAST_CTL_MASK_BR_1 (1 << 9) +#define CPU_MAST_CTL_M_WR_TRIG (1 << 10) +#define CPU_MAST_CTL_M_RD_TRIG (1 << 11) +#define CPU_MAST_CTL_CLEAN_BLK (1 << 12) +#define CPU_MAST_CTL_FLUSH_BLK (1 << 13) + +#endif /* __64460_H__ */ diff --git a/board/prodrive/p3mx/Makefile b/board/prodrive/p3mx/Makefile new file mode 100644 index 0000000000..bf74a5a83b --- /dev/null +++ b/board/prodrive/p3mx/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../../Marvell/common) +endif + +LIB = $(obj)lib$(BOARD).a + +SOBJS = misc.o +COBJS = $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \ + ../../Marvell/common/i2c.o ../../Marvell/common/memory.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/prodrive/p3mx/config.mk b/board/prodrive/p3mx/config.mk new file mode 100644 index 0000000000..35bf1c1554 --- /dev/null +++ b/board/prodrive/p3mx/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# p3mx boards (P3M750 & P3M7448) +# + +TEXT_BASE = 0xfff00000 diff --git a/board/prodrive/p3mx/eth.h b/board/prodrive/p3mx/eth.h new file mode 100644 index 0000000000..aab32d2a5a --- /dev/null +++ b/board/prodrive/p3mx/eth.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * eth.h - header file for the polled mode GT ethernet driver + */ + +#ifndef __EVB64360_ETH_H__ +#define __EVB64360_ETH_H__ + +#include +#include +#include +#include + + +int db64360_eth0_poll(void); +int db64360_eth0_transmit(unsigned int s, volatile char *p); +void db64360_eth0_disable(void); +bool network_start(bd_t *bis); + + +#endif /* __EVB64360_ETH_H__ */ diff --git a/board/prodrive/p3mx/misc.S b/board/prodrive/p3mx/misc.S new file mode 100644 index 0000000000..160b1d31f7 --- /dev/null +++ b/board/prodrive/p3mx/misc.S @@ -0,0 +1,245 @@ +#include +#include <74xx_7xx.h> +#include "version.h" + +#include +#include + +#include +#include + +#include "../../Marvell/include/mv_gen_reg.h" + +#ifdef CONFIG_ECC + /* Galileo specific asm code for initializing ECC */ + .globl board_relocate_rom +board_relocate_rom: + mflr r7 + /* update the location of the GT registers */ + lis r11, CFG_GT_REGS@h + /* if we're using ECC, we must use the DMA engine to copy ourselves */ + bl start_idma_transfer_0 + bl wait_for_idma_0 + bl stop_idma_engine_0 + + mtlr r7 + blr + + .globl board_init_ecc +board_init_ecc: + mflr r7 + /* NOTE: r10 still contains the location we've been relocated to + * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */ + + /* now that we're running from ram, init the rest of main memory + * for ECC use */ + lis r8, CFG_MONITOR_LEN@h + ori r8, r8, CFG_MONITOR_LEN@l + + divw r3, r10, r8 + + /* set up the counter, and init the starting address */ + mtctr r3 + li r12, 0 + + /* bytes per transfer */ + mr r5, r8 +about_to_init_ecc: +1: mr r3, r12 + mr r4, r12 + bl start_idma_transfer_0 + bl wait_for_idma_0 + bl stop_idma_engine_0 + add r12, r12, r8 + bdnz 1b + + mtlr r7 + blr + + /* r3: dest addr + * r4: source addr + * r5: byte count + * r11: gt regbase + * trashes: r6, r5 + */ +start_idma_transfer_0: + /* set the byte count, including the OWN bit */ + mr r6, r11 + ori r6, r6, CHANNEL0_DMA_BYTE_COUNT + stwbrx r5, 0, (r6) + + /* set the source address */ + mr r6, r11 + ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS + stwbrx r4, 0, (r6) + + /* set the dest address */ + mr r6, r11 + ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS + stwbrx r3, 0, (r6) + + /* set the next record pointer */ + li r5, 0 + mr r6, r11 + ori r6, r6, CHANNEL0NEXT_RECORD_POINTER + stwbrx r5, 0, (r6) + + /* set the low control register */ + /* bit 9 is NON chained mode, bit 31 is new style descriptors. + bit 12 is channel enable */ + ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11) + /* 15 shifted by 16 (oris) == bit 31 */ + oris r5, r5, (1 << 15) + mr r6, r11 + ori r6, r6, CHANNEL0CONTROL + stwbrx r5, 0, (r6) + + blr + + /* this waits for the bytecount to return to zero, indicating + * that the trasfer is complete */ +wait_for_idma_0: + mr r5, r11 + lis r6, 0xff + ori r6, r6, 0xffff + ori r5, r5, CHANNEL0_DMA_BYTE_COUNT +1: lwbrx r4, 0, (r5) + and. r4, r4, r6 + bne 1b + + blr + + /* this turns off channel 0 of the idma engine */ +stop_idma_engine_0: + /* shut off the DMA engine */ + li r5, 0 + mr r6, r11 + ori r6, r6, CHANNEL0CONTROL + stwbrx r5, 0, (r6) + + blr +#endif + +#ifdef CFG_BOARD_ASM_INIT + /* NOTE: trashes r3-r7 */ + .globl board_asm_init +board_asm_init: + /* just move the GT registers to where they belong */ + lis r3, CFG_DFL_GT_REGS@h + ori r3, r3, CFG_DFL_GT_REGS@l + lis r4, CFG_GT_REGS@h + ori r4, r4, CFG_GT_REGS@l + li r5, INTERNAL_SPACE_DECODE + + /* test to see if we've already moved */ + lwbrx r6, r5, r4 + andi. r6, r6, 0xffff + /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */ +/* rlwinm r7, r4, 8, 16, 31 + rlwinm r7, r4, 12, 16, 31 */ /* original */ + rlwinm r7, r4, 16, 16, 31 + /* -----------------------------------------------------*/ + cmp cr0, r7, r6 + beqlr + + /* nope, have to move the registers */ + lwbrx r6, r5, r3 + andis. r6, r6, 0xffff + or r6, r6, r7 + stwbrx r6, r5, r3 + + /* now, poll for the change */ +1: lwbrx r7, r5, r4 + cmp cr0, r7, r6 + bne 1b + + lis r3, CFG_INT_SRAM_BASE@h + ori r3, r3, CFG_INT_SRAM_BASE@l + rlwinm r3, r3, 16, 16, 31 + lis r4, CFG_GT_REGS@h + ori r4, r4, CFG_GT_REGS@l + li r5, INTEGRATED_SRAM_BASE_ADDR + stwbrx r3, r5, r4 + +2: lwbrx r6, r5, r4 + cmp cr0, r3, r6 + bne 2b + + /* done! */ + blr +#endif + +/* For use of the debug LEDs */ + .global led_on0_relocated +led_on0_relocated: + xor r21, r21, r21 + xor r18, r18, r18 + lis r18, 0xFC80 + ori r18, r18, 0x8000 +/* stw r21, 0x0(r18) */ + sync + blr + + .global led_off0_relocated +led_off0_relocated: + xor r21, r21, r21 + xor r18, r18, r18 + lis r18, 0xFC81 + ori r18, r18, 0x4000 +/* stw r21, 0x0(r18) */ + sync + blr + + .global led_on0 +led_on0: + xor r18, r18, r18 + lis r18, 0x1c80 + ori r18, r18, 0x8000 +/* stw r18, 0x0(r18) */ + sync + blr + + .global led_off0 +led_off0: + xor r18, r18, r18 + lis r18, 0x1c81 + ori r18, r18, 0x4000 +/* stw r18, 0x0(r18) */ + sync + blr + + .global led_on1 +led_on1: + xor r18, r18, r18 + lis r18, 0x1c80 + ori r18, r18, 0xc000 +/* stw r18, 0x0(r18) */ + sync + blr + + .global led_off1 +led_off1: + xor r18, r18, r18 + lis r18, 0x1c81 + ori r18, r18, 0x8000 +/* stw r18, 0x0(r18) */ + sync + blr + + .global led_on2 +led_on2: + xor r18, r18, r18 + lis r18, 0x1c81 + ori r18, r18, 0x0000 +/* stw r18, 0x0(r18) */ + sync + blr + + .global led_off2 +led_off2: + xor r18, r18, r18 + lis r18, 0x1c81 + ori r18, r18, 0xc000 +/* stw r18, 0x0(r18) */ + sync + blr diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c new file mode 100644 index 0000000000..da95cfa777 --- /dev/null +++ b/board/prodrive/p3mx/mpsc.c @@ -0,0 +1,1013 @@ +/* + * (C) Copyright 2001 + * John Clemens , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************* + * changes for Marvell DB64460 eval board 2003 by Ingo Assmus + * + ************************************************************************/ + +/* + * mpsc.c - driver for console over the MPSC. + */ + + +#include +#include +#include + +#include +#include "mpsc.h" + +#include "mv_regs.h" + +#include "../../Marvell/include/memory.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* Define this if you wish to use the MPSC as a register based UART. + * This will force the serial port to not use the SDMA engine at all. + */ +#undef CONFIG_MPSC_DEBUG_PORT + + +int (*mpsc_putchar) (char ch) = mpsc_putchar_early; +char (*mpsc_getchar) (void) = mpsc_getchar_debug; +int (*mpsc_test_char) (void) = mpsc_test_char_debug; + + +static volatile unsigned int *rx_desc_base = NULL; +static unsigned int rx_desc_index = 0; +static volatile unsigned int *tx_desc_base = NULL; +static unsigned int tx_desc_index = 0; + +/* local function declarations */ +static int galmpsc_connect (int channel, int connect); +static int galmpsc_route_rx_clock (int channel, int brg); +static int galmpsc_route_tx_clock (int channel, int brg); +static int galmpsc_write_config_regs (int mpsc, int mode); +static int galmpsc_config_channel_regs (int mpsc); +static int galmpsc_set_char_length (int mpsc, int value); +static int galmpsc_set_stop_bit_length (int mpsc, int value); +static int galmpsc_set_parity (int mpsc, int value); +static int galmpsc_enter_hunt (int mpsc); +static int galmpsc_set_brkcnt (int mpsc, int value); +static int galmpsc_set_tcschar (int mpsc, int value); +static int galmpsc_set_snoop (int mpsc, int value); +static int galmpsc_shutdown (int mpsc); + +static int galsdma_set_RFT (int channel); +static int galsdma_set_SFM (int channel); +static int galsdma_set_rxle (int channel); +static int galsdma_set_txle (int channel); +static int galsdma_set_burstsize (int channel, unsigned int value); +static int galsdma_set_RC (int channel, unsigned int value); + +static int galbrg_set_CDV (int channel, int value); +static int galbrg_enable (int channel); +static int galbrg_disable (int channel); +static int galbrg_set_clksrc (int channel, int value); +static int galbrg_set_CUV (int channel, int value); + +static void galsdma_enable_rx (void); +static int galsdma_set_mem_space (unsigned int memSpace, + unsigned int memSpaceTarget, + unsigned int memSpaceAttr, + unsigned int baseAddress, + unsigned int size); + + +#define SOFTWARE_CACHE_MANAGEMENT + +#ifdef SOFTWARE_CACHE_MANAGEMENT +#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));} +#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));} +#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));} +#else +#define FLUSH_DCACHE(a,b) +#define FLUSH_AND_INVALIDATE_DCACHE(a,b) +#define INVALIDATE_DCACHE(a,b) +#endif + +#ifdef CONFIG_MPSC_DEBUG_PORT +static void mpsc_debug_init (void) +{ + + volatile unsigned int temp; + + /* Clear the CFR (CHR4) */ + /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ + temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); + temp &= 0xffffff00; + temp |= BIT29; + GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), + temp); + + /* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */ + temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP)); + temp |= (BIT12 | BIT15); + GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP), + temp); + + /* Set int mask */ + temp = GTREGREAD (GALMPSC_0_INT_MASK); + temp |= BIT6; + GT_REG_WRITE (GALMPSC_0_INT_MASK, temp); +} +#endif + +char mpsc_getchar_debug (void) +{ + volatile int temp; + volatile unsigned int cause; + + cause = GTREGREAD (GALMPSC_0_INT_CAUSE); + while ((cause & BIT6) == 0) { + cause = GTREGREAD (GALMPSC_0_INT_CAUSE); + } + + temp = GTREGREAD (GALMPSC_CHANNELREG_10 + + (CHANNEL * GALMPSC_REG_GAP)); + /* By writing 1's to the set bits, the register is cleared */ + GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP), + temp); + GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6); + return (temp >> 16) & 0xff; +} + +/* special function for running out of flash. doesn't modify any + * global variables [josh] */ +int mpsc_putchar_early (char ch) +{ + int mpsc = CHANNEL; + int temp = + GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); + galmpsc_set_tcschar (mpsc, ch); + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), + temp | 0x200); + +#define MAGIC_FACTOR (10*1000000) + + udelay (MAGIC_FACTOR / gd->baudrate); + return 0; +} + +/* This is used after relocation, see serial.c and mpsc_init2 */ +static int mpsc_putchar_sdma (char ch) +{ + volatile unsigned int *p; + unsigned int temp; + + + /* align the descriptor */ + p = tx_desc_base; + memset ((void *) p, 0, 8 * sizeof (unsigned int)); + + /* fill one 64 bit buffer */ + /* word swap, pad with 0 */ + p[4] = 0; /* x */ + p[5] = (unsigned int) ch; /* x */ + + /* CHANGED completely according to GT64260A dox - NTL */ + p[0] = 0x00010001; /* 0 */ + p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* 4 */ + p[2] = 0; /* 8 */ + p[3] = (unsigned int) &p[4]; /* c */ + +#if 0 + p[9] = DESC_FIRST | DESC_LAST; + p[10] = (unsigned int) &p[0]; + p[11] = (unsigned int) &p[12]; +#endif + + FLUSH_DCACHE (&p[0], &p[8]); + + GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), + (unsigned int) &p[0]); + GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), + (unsigned int) &p[0]); + + temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); + temp |= (TX_DEMAND | TX_STOP); + GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); + + INVALIDATE_DCACHE (&p[1], &p[2]); + + while (p[1] & DESC_OWNER_BIT) { + udelay (100); + INVALIDATE_DCACHE (&p[1], &p[2]); + } + return 0; +} + +char mpsc_getchar_sdma (void) +{ + static unsigned int done = 0; + volatile char ch; + unsigned int len = 0, idx = 0, temp; + + volatile unsigned int *p; + + + do { + p = &rx_desc_base[rx_desc_index * 8]; + + INVALIDATE_DCACHE (&p[0], &p[1]); + /* Wait for character */ + while (p[1] & DESC_OWNER_BIT) { + udelay (100); + INVALIDATE_DCACHE (&p[0], &p[1]); + } + + /* Handle error case */ + if (p[1] & (1 << 15)) { + printf ("oops, error: %08x\n", p[1]); + + temp = GTREGREAD (GALMPSC_CHANNELREG_2 + + (CHANNEL * GALMPSC_REG_GAP)); + temp |= (1 << 23); + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + + (CHANNEL * GALMPSC_REG_GAP), temp); + + /* Can't poll on abort bit, so we just wait. */ + udelay (100); + + galsdma_enable_rx (); + } + + /* Number of bytes left in this descriptor */ + len = p[0] & 0xffff; + + if (len) { + /* Where to look */ + idx = 5; + if (done > 3) + idx = 4; + if (done > 7) + idx = 7; + if (done > 11) + idx = 6; + + INVALIDATE_DCACHE (&p[idx], &p[idx + 1]); + ch = p[idx] & 0xff; + done++; + } + + if (done < len) { + /* this descriptor has more bytes still + * shift down the char we just read, and leave the + * buffer in place for the next time around + */ + p[idx] = p[idx] >> 8; + FLUSH_DCACHE (&p[idx], &p[idx + 1]); + } + + if (done == len) { + /* nothing left in this descriptor. + * go to next one + */ + p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; + p[0] = 0x00100000; + FLUSH_DCACHE (&p[0], &p[1]); + /* Next descriptor */ + rx_desc_index = (rx_desc_index + 1) % RX_DESC; + done = 0; + } + } while (len == 0); /* galileo bug.. len might be zero */ + + return ch; +} + + +int mpsc_test_char_debug (void) +{ + if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0) + return 0; + else { + return 1; + } +} + + +int mpsc_test_char_sdma (void) +{ + volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8]; + + INVALIDATE_DCACHE (&p[1], &p[2]); + + if (p[1] & DESC_OWNER_BIT) + return 0; + else + return 1; +} + +int mpsc_init (int baud) +{ + /* BRG CONFIG */ + galbrg_set_baudrate (CHANNEL, baud); + galbrg_set_clksrc (CHANNEL, 8); /* set source=Tclk */ + galbrg_set_CUV (CHANNEL, 0); /* set up CountUpValue */ + galbrg_enable (CHANNEL); /* Enable BRG */ + + /* Set up clock routing */ + galmpsc_connect (CHANNEL, GALMPSC_CONNECT); /* connect it */ + + galmpsc_route_rx_clock (CHANNEL, CHANNEL); /* chosse BRG0 for Rx */ + galmpsc_route_tx_clock (CHANNEL, CHANNEL); /* chose BRG0 for Tx */ + + /* reset MPSC state */ + galmpsc_shutdown (CHANNEL); + + /* SDMA CONFIG */ + galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8); /* in 64 bit words (8 bytes) */ + galsdma_set_txle (CHANNEL); + galsdma_set_rxle (CHANNEL); + galsdma_set_RC (CHANNEL, 0xf); + galsdma_set_SFM (CHANNEL); + galsdma_set_RFT (CHANNEL); + + /* MPSC CONFIG */ + galmpsc_write_config_regs (CHANNEL, GALMPSC_UART); + galmpsc_config_channel_regs (CHANNEL); + galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */ + galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE); /* N */ + galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */ + +#ifdef CONFIG_MPSC_DEBUG_PORT + mpsc_debug_init (); +#endif + + /* COMM_MPSC CONFIG */ +#ifdef SOFTWARE_CACHE_MANAGEMENT + galmpsc_set_snoop (CHANNEL, 0); /* disable snoop */ +#else + galmpsc_set_snoop (CHANNEL, 1); /* enable snoop */ +#endif + + return 0; +} + + +void mpsc_sdma_init (void) +{ + /* Setup SDMA channel0 SDMA_CONFIG_REG*/ + GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff); + + /* Enable MPSC-Window0 for DRAM Bank 0 */ + if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT, + MV64460_SDMA_DRAM_CS_0_TARGET, + 0, + memoryGetBankBaseAddress(0), + memoryGetBankSize(0)) != true) + printf ("%s: SDMA_Window0 memory setup failed !!! \n", + __FUNCTION__); + + + /* Enable MPSC-Window1 for DRAM Bank 1 */ + if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT, + MV64460_SDMA_DRAM_CS_1_TARGET, + 0, + memoryGetBankBaseAddress(1), + memoryGetBankSize(1)) != true) + printf ("%s: SDMA_Window1 memory setup failed !!! \n", + __FUNCTION__); + + + /* Disable MPSC-Window2 */ + if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT, + MV64460_SDMA_DRAM_CS_2_TARGET, + 0, + memoryGetBankBaseAddress(2), + memoryGetBankSize(2)) != true) + printf ("%s: SDMA_Window2 memory setup failed !!! \n", + __FUNCTION__); + + + /* Disable MPSC-Window3 */ + if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT, + MV64460_SDMA_DRAM_CS_3_TARGET, + 0, + memoryGetBankBaseAddress(3), + memoryGetBankSize(3)) != true) + printf ("%s: SDMA_Window3 memory setup failed !!! \n", + __FUNCTION__); + + /* Setup MPSC0 access mode Window0 full access */ + GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG, + (MV64460_SDMA_WIN_ACCESS_FULL << + (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); + + /* Setup MPSC1 access mode Window1 full access */ + GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG, + (MV64460_SDMA_WIN_ACCESS_FULL << + (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); + + /* Setup MPSC internal address space base address */ + GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS); + + /* no high address remap*/ + GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00); + GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00); + + /* clear interrupt cause register for MPSC (fault register)*/ + GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00); +} + + +void mpsc_init2 (void) +{ + int i; + +#ifndef CONFIG_MPSC_DEBUG_PORT + mpsc_putchar = mpsc_putchar_sdma; + mpsc_getchar = mpsc_getchar_sdma; + mpsc_test_char = mpsc_test_char_sdma; +#endif + /* RX descriptors */ + rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) * + sizeof (unsigned int)); + + /* align descriptors */ + rx_desc_base = (unsigned int *) + (((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0); + + rx_desc_index = 0; + + memset ((void *) rx_desc_base, 0, + (RX_DESC * 8) * sizeof (unsigned int)); + + for (i = 0; i < RX_DESC; i++) { + rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4]; /* Buffer */ + rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8]; /* Next descriptor */ + rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* Command & control */ + rx_desc_base[i * 8] = 0x00100000; + } + rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0]; + + FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]); + GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF), + (unsigned int) &rx_desc_base[0]); + + /* TX descriptors */ + tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) * + sizeof (unsigned int)); + + /* align descriptors */ + tx_desc_base = (unsigned int *) + (((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0); + + tx_desc_index = -1; + + memset ((void *) tx_desc_base, 0, + (TX_DESC * 8) * sizeof (unsigned int)); + + for (i = 0; i < TX_DESC; i++) { + tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323; + tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323; + tx_desc_base[i * 8 + 3] = + (unsigned int) &tx_desc_base[i * 8 + 4]; + tx_desc_base[i * 8 + 2] = + (unsigned int) &tx_desc_base[(i + 1) * 8]; + tx_desc_base[i * 8 + 1] = + DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; + + /* set sbytecnt and shadow byte cnt to 1 */ + tx_desc_base[i * 8] = 0x00010001; + } + tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0]; + + FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]); + + udelay (100); + + galsdma_enable_rx (); + + return; +} + +int galbrg_set_baudrate (int channel, int rate) +{ + int clock; + + galbrg_disable (channel); /*ok */ + +#ifdef ZUMA_NTL + /* from tclk */ + clock = (CFG_TCLK / (16 * rate)) - 1; +#else + clock = (CFG_TCLK / (16 * rate)) - 1; +#endif + + galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */ + + galbrg_enable (channel); + + gd->baudrate = rate; + + return 0; +} + +/* ------------------------------------------------------------------ */ + +/* Below are all the private functions that no one else needs */ + +static int galbrg_set_CDV (int channel, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); + temp &= 0xFFFF0000; + temp |= (value & 0x0000FFFF); + GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); + + return 0; +} + +static int galbrg_enable (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); + temp |= 0x00010000; + GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); + + return 0; +} + +static int galbrg_disable (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); + temp &= 0xFFFEFFFF; + GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); + + return 0; +} + +static int galbrg_set_clksrc (int channel, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); + temp &= 0xFFC3FFFF; /* Bit 18 - 21 (MV 64260 18-22) */ + temp |= (value << 18); + GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); + return 0; +} + +static int galbrg_set_CUV (int channel, int value) +{ + /* set CountUpValue */ + GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value); + + return 0; +} + +#if 0 +static int galbrg_reset (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); + temp |= 0x20000; + GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); + + return 0; +} +#endif + +static int galsdma_set_RFT (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp |= 0x00000001; + GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), + temp); + + return 0; +} + +static int galsdma_set_SFM (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp |= 0x00000002; + GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), + temp); + + return 0; +} + +static int galsdma_set_rxle (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp |= 0x00000040; + GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), + temp); + + return 0; +} + +static int galsdma_set_txle (int channel) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp |= 0x00000080; + GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), + temp); + + return 0; +} + +static int galsdma_set_RC (int channel, unsigned int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp &= ~0x0000003c; + temp |= (value << 2); + GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), + temp); + + return 0; +} + +static int galsdma_set_burstsize (int channel, unsigned int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); + temp &= 0xFFFFCFFF; + switch (value) { + case 8: + GT_REG_WRITE (GALSDMA_0_CONF_REG + + (channel * GALSDMA_REG_DIFF), + (temp | (0x3 << 12))); + break; + + case 4: + GT_REG_WRITE (GALSDMA_0_CONF_REG + + (channel * GALSDMA_REG_DIFF), + (temp | (0x2 << 12))); + break; + + case 2: + GT_REG_WRITE (GALSDMA_0_CONF_REG + + (channel * GALSDMA_REG_DIFF), + (temp | (0x1 << 12))); + break; + + case 1: + GT_REG_WRITE (GALSDMA_0_CONF_REG + + (channel * GALSDMA_REG_DIFF), + (temp | (0x0 << 12))); + break; + + default: + return -1; + break; + } + + return 0; +} + +static int galmpsc_connect (int channel, int connect) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_ROUTING_REGISTER); + + if ((channel == 0) && connect) + temp &= ~0x00000007; + else if ((channel == 1) && connect) + temp &= ~(0x00000007 << 6); + else if ((channel == 0) && !connect) + temp |= 0x00000007; + else + temp |= (0x00000007 << 6); + + /* Just in case... */ + temp &= 0x3fffffff; + + GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp); + + return 0; +} + +static int galmpsc_route_rx_clock (int channel, int brg) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_RxC_ROUTE); + + if (channel == 0) { + temp &= ~0x0000000F; + temp |= brg; + } else { + temp &= ~0x00000F00; + temp |= (brg << 8); + } + + GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp); + + return 0; +} + +static int galmpsc_route_tx_clock (int channel, int brg) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_TxC_ROUTE); + + if (channel == 0) { + temp &= ~0x0000000F; + temp |= brg; + } else { + temp &= ~0x00000F00; + temp |= (brg << 8); + } + + GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp); + + return 0; +} + +static int galmpsc_write_config_regs (int mpsc, int mode) +{ + if (mode == GALMPSC_UART) { + /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */ + GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP), + 0x000004c4); + + /* Main config reg High (32x Rx/Tx clock mode, width=8bits */ + GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP), + 0x024003f8); + /* 22 2222 1111 */ + /* 54 3210 9876 */ + /* 0000 0010 0000 0000 */ + /* 1 */ + /* 098 7654 3210 */ + /* 0000 0011 1111 1000 */ + } else + return -1; + + return 0; +} + +static int galmpsc_config_channel_regs (int mpsc) +{ + GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1); + GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0); + GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0); + + galmpsc_set_brkcnt (mpsc, 0x3); + galmpsc_set_tcschar (mpsc, 0xab); + + return 0; +} + +static int galmpsc_set_brkcnt (int mpsc, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); + temp &= 0x0000FFFF; + temp |= (value << 16); + GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); + + return 0; +} + +static int galmpsc_set_tcschar (int mpsc, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); + temp &= 0xFFFF0000; + temp |= value; + GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); + + return 0; +} + +static int galmpsc_set_char_length (int mpsc, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); + temp &= 0xFFFFCFFF; + temp |= (value << 12); + GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); + + return 0; +} + +static int galmpsc_set_stop_bit_length (int mpsc, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); + temp &= 0xFFFFBFFF; + temp |= (value << 14); + GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); + + return 0; +} + +static int galmpsc_set_parity (int mpsc, int value) +{ + unsigned int temp; + + temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); + if (value != -1) { + temp &= 0xFFF3FFF3; + temp |= ((value << 18) | (value << 2)); + temp |= ((value << 17) | (value << 1)); + } else { + temp &= 0xFFF1FFF1; + } + + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); + + return 0; +} + +static int galmpsc_enter_hunt (int mpsc) +{ + int temp; + + temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); + temp |= 0x80000000; + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); + + while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) & + MPSC_ENTER_HUNT) { + udelay (1); + } + return 0; +} + + +static int galmpsc_shutdown (int mpsc) +{ + unsigned int temp; + + /* cause RX abort (clears RX) */ + temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); + temp |= MPSC_RX_ABORT | MPSC_TX_ABORT; + temp &= ~MPSC_ENTER_HUNT; + GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); + + GT_REG_WRITE (GALSDMA_0_COM_REG, 0); + GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT); + + /* shut down the MPSC */ + GT_REG_WRITE (GALMPSC_MCONF_LOW, 0); + GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0); + GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0); + + udelay (100); + + /* shut down the sdma engines. */ + /* reset config to default */ + GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc); + + udelay (100); + + /* clear the SDMA current and first TX and RX pointers */ + GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0); + GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0); + GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0); + + udelay (100); + + return 0; +} + +static void galsdma_enable_rx (void) +{ + int temp; + + /* Enable RX processing */ + temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); + temp |= RX_ENABLE; + GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); + + galmpsc_enter_hunt (CHANNEL); +} + +static int galmpsc_set_snoop (int mpsc, int value) +{ + int reg = + mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : + MPSC_0_ADDRESS_CONTROL_LOW; + int temp = GTREGREAD (reg); + + if (value) + temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30); + else + temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30)); + GT_REG_WRITE (reg, temp); + return 0; +} + +/******************************************************************************* +* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map. +* +* DESCRIPTION: +* the MV64460 SDMA has its own address decoding map that is de-coupled +* from the CPU interface address decoding windows. The SDMA channels +* share four address windows. Each region can be individually configured +* by this function by associating it to a target interface and setting +* base and size values. +* +* NOTE!!! +* The size must be in 64Kbyte granularity. +* The base address must be aligned to the size. +* The size must be a series of 1s followed by a series of zeros +* +* OUTPUT: +* None. +* +* RETURN: +* True for success, false otherwise. +* +*******************************************************************************/ + +static int galsdma_set_mem_space (unsigned int memSpace, + unsigned int memSpaceTarget, + unsigned int memSpaceAttr, + unsigned int baseAddress, unsigned int size) +{ + unsigned int temp; + + if (size == 0) { + GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, + 1 << memSpace); + return true; + } + + /* The base address must be aligned to the size. */ + if (baseAddress % size != 0) { + return false; + } + if (size < 0x10000) { + return false; + } + + /* Align size and base to 64K */ + baseAddress &= 0xffff0000; + size &= 0xffff0000; + temp = size >> 16; + + /* Checking that the size is a sequence of '1' followed by a + sequence of '0' starting from LSB to MSB. */ + while ((temp > 0) && (temp & 0x1)) { + temp = temp >> 1; + } + + if (temp != 0) { + GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8, + (baseAddress | memSpaceTarget | memSpaceAttr)); + GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8), + (size - 1) & 0xffff0000); + GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, + 1 << memSpace); + } else { + /* An invalid size was specified */ + return false; + } + return true; +} diff --git a/board/prodrive/p3mx/mpsc.h b/board/prodrive/p3mx/mpsc.h new file mode 100644 index 0000000000..a03d1cc0f8 --- /dev/null +++ b/board/prodrive/p3mx/mpsc.h @@ -0,0 +1,156 @@ +/* + * (C) Copyright 2001 + * John Clemens , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************* + * changes for Marvell DB64360 eval board 2003 by Ingo Assmus + * + ************************************************************************/ + + +/* + * mpsc.h - header file for MPSC in uart mode (console driver) + */ + +#ifndef __MPSC_H__ +#define __MPSC_H__ + +/* include actual Galileo defines */ +#include "../../Marvell/include/mv_gen_reg.h" + +/* driver related defines */ + +int mpsc_init(int baud); +void mpsc_sdma_init(void); +void mpsc_init2(void); +int galbrg_set_baudrate(int channel, int rate); + +int mpsc_putchar_early(char ch); +char mpsc_getchar_debug(void); +int mpsc_test_char_debug(void); + +int mpsc_test_char_sdma(void); + +extern int (*mpsc_putchar)(char ch); +extern char (*mpsc_getchar)(void); +extern int (*mpsc_test_char)(void); + +#define CHANNEL CONFIG_MPSC_PORT + +#define TX_DESC 5 +#define RX_DESC 20 + +#define DESC_FIRST 0x00010000 +#define DESC_LAST 0x00020000 +#define DESC_OWNER_BIT 0x80000000 + +#define TX_DEMAND 0x00800000 +#define TX_STOP 0x00010000 +#define RX_ENABLE 0x00000080 + +#define SDMA_RX_ABORT (1 << 15) +#define SDMA_TX_ABORT (1 << 31) +#define MPSC_TX_ABORT (1 << 7) +#define MPSC_RX_ABORT (1 << 23) +#define MPSC_ENTER_HUNT (1 << 31) + +/* MPSC defines */ + +#define GALMPSC_CONNECT 0x1 +#define GALMPSC_DISCONNECT 0x0 + +#define GALMPSC_UART 0x1 + +#define GALMPSC_STOP_BITS_1 0x0 +#define GALMPSC_STOP_BITS_2 0x1 +#define GALMPSC_CHAR_LENGTH_8 0x3 +#define GALMPSC_CHAR_LENGTH_7 0x2 + +#define GALMPSC_PARITY_ODD 0x0 +#define GALMPSC_PARITY_EVEN 0x2 +#define GALMPSC_PARITY_MARK 0x3 +#define GALMPSC_PARITY_SPACE 0x1 +#define GALMPSC_PARITY_NONE -1 + +#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ +#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ +#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ +#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ +#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ +#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ +#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ + +#define GALMPSC_REG_GAP 0x1000 + +#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ +#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ +#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ +#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ +#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ +#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ +#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ +#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ +#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ +#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ +#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ +#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ + +#define GALSDMA_COMMAND_FIRST (1 << 16) +#define GALSDMA_COMMAND_LAST (1 << 17) +#define GALSDMA_COMMAND_ENABLEINT (1 << 23) +#define GALSDMA_COMMAND_AUTO (1 << 30) +#define GALSDMA_COMMAND_OWNER (1 << 31) + +#define GALSDMA_RX 0 +#define GALSDMA_TX 1 + +/* CHANNEL2 should be CHANNEL1, according to documentation, + * but to work with the current GTREGS file... + */ +#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ +#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ +#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ +#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ +#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ +#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ +#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ +#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ +#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ +#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ +#define GALSDMA_REG_DIFF 0x2000 + +/* WRONG in gt64260R.h */ +#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ +#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ +#define GALMPSC_0_INT_CAUSE 0xb804 +#define GALMPSC_0_INT_MASK 0xb884 + +#define GALSDMA_MODE_UART 0 +#define GALSDMA_MODE_BISYNC 1 +#define GALSDMA_MODE_HDLC 2 +#define GALSDMA_MODE_TRANSPARENT 3 + +#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ +#define GALBRG_REG_GAP 0x0008 +#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ + +#endif /* __MPSC_H__ */ diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c new file mode 100644 index 0000000000..1127673648 --- /dev/null +++ b/board/prodrive/p3mx/mv_eth.c @@ -0,0 +1,3418 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus + * + * based on - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + 3 the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * mv_eth.c - header file for the polled mode GT ethernet driver + */ +#include +#include +#include +#include + +#include "mv_eth.h" + +/* enable Debug outputs */ + +#undef DEBUG_MV_ETH + +#ifdef DEBUG_MV_ETH +#define DEBUG +#define DP(x) x +#else +#define DP(x) +#endif + +/* PHY DFCDL Registers */ +#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 +#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 +#define ETH_PHY_DFCDL_ADDR_REG 0x2110 +#define ETH_PHY_DFCDL_DATA0_REG 0x2114 + +#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ +#define PHY_UPDATE_TIMEOUT 10000 + +#undef MV64460_CHECKSUM_OFFLOAD +/************************************************************************* +************************************************************************** +************************************************************************** +* The first part is the high level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ + +/* Definition for configuring driver */ +/* #define UPDATE_STATS_BY_SOFTWARE */ +#undef MV64460_RX_QUEUE_FILL_ON_TASK + + +/* Constants */ +#define MAGIC_ETH_RUNNING 8031971 +#define MV64460_INTERNAL_SRAM_SIZE _256K +#define EXTRA_BYTES 32 +#define WRAP ETH_HLEN + 2 + 4 + 16 +#define BUFFER_MTU dev->mtu + WRAP +#define INT_CAUSE_UNMASK_ALL 0x0007ffff +#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff +#ifdef MV64460_RX_FILL_ON_TASK +#define INT_CAUSE_MASK_ALL 0x00000000 +#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL +#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT +#endif + +/* Read/Write to/from MV64460 internal registers */ +#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset)) +#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data) +#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits))) +#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits))) + +#define my_cpu_to_le32(x) my_le32_to_cpu((x)) + +/* Static function declarations */ +static int mv64460_eth_real_open (struct eth_device *eth); +static int mv64460_eth_real_stop (struct eth_device *eth); +static struct net_device_stats *mv64460_eth_get_stats (struct eth_device + *dev); +static void eth_port_init_mac_tables (ETH_PORT eth_port_num); +static void mv64460_eth_update_stat (struct eth_device *dev); +bool db64460_eth_start (struct eth_device *eth); +unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, + unsigned int mib_offset); +int mv64460_eth_receive (struct eth_device *dev); + +int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length); + +int mv_miiphy_read(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short *value); +int mv_miiphy_write(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short value); + +int phy_setup_aneg (char *devname, unsigned char addr); + +#ifndef UPDATE_STATS_BY_SOFTWARE +static void mv64460_eth_print_stat (struct eth_device *dev); +#endif +/* Processes a received packet */ +extern void NetReceive (volatile uchar *, int); + +extern unsigned int INTERNAL_REG_BASE_ADDR; + +unsigned long my_le32_to_cpu (unsigned long x) +{ + return (((x & 0x000000ffU) << 24) | + ((x & 0x0000ff00U) << 8) | + ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24)); +} + +/************************************************* + *Helper functions - used inside the driver only * + *************************************************/ +#ifdef DEBUG_MV_ETH +void print_globals (struct eth_device *dev) +{ + printf ("Ethernet PRINT_Globals-Debug function\n"); + printf ("Base Address for ETH_PORT_INFO: %08x\n", + (unsigned int) dev->priv); + printf ("Base Address for mv64460_eth_priv: %08x\n", + (unsigned int) &(((ETH_PORT_INFO *) dev->priv)-> + port_private)); + + printf ("GT Internal Base Address: %08x\n", + INTERNAL_REG_BASE_ADDR); + printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); + printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); + printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> + p_rx_buffer_base[0], + (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32); + printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> + p_tx_buffer_base[0], + (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32); +} +#endif + + + +/********************************************************************** + * mv64460_eth_print_phy_status + * + * Prints gigabit ethenret phy status + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ +void mv64460_eth_print_phy_status (struct eth_device *dev) +{ + struct mv64460_eth_priv *port_private; + unsigned int port_num; + ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv; + unsigned int port_status, phy_reg_data; + + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Check Link status on phy */ + eth_port_read_smi_reg (port_num, 1, &phy_reg_data); + if (!(phy_reg_data & 0x20)) { + printf ("Ethernet port changed link status to DOWN\n"); + } else { + port_status = + MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); + printf ("Ethernet status port %d: Link up", port_num); + printf (", %s", + (port_status & BIT2) ? "Full Duplex" : "Half Duplex"); + if (port_status & BIT4) + printf (", Speed 1 Gbps"); + else + printf (", %s", + (port_status & BIT5) ? "Speed 100 Mbps" : + "Speed 10 Mbps"); + printf ("\n"); + } +} + +/********************************************************************** + * u-boot entry functions for mv64460_eth + * + **********************************************************************/ +int db64460_eth_probe (struct eth_device *dev) +{ + return ((int) db64460_eth_start (dev)); +} + +int db64460_eth_poll (struct eth_device *dev) +{ + return mv64460_eth_receive (dev); +} + +int db64460_eth_transmit (struct eth_device *dev, volatile void *packet, + int length) +{ + mv64460_eth_xmit (dev, packet, length); + return 0; +} + +void db64460_eth_disable (struct eth_device *dev) +{ + mv64460_eth_stop (dev); +} + + +#define DFCDL(write,read) ((write << 6) | read) +unsigned int ethDfcdls[] = { DFCDL(0,0), + DFCDL(1,1), + DFCDL(2,2), + DFCDL(3,3), + DFCDL(4,4), + DFCDL(5,5), + DFCDL(6,6), + DFCDL(7,7), + DFCDL(8,8), + DFCDL(9,9), + DFCDL(10,10), + DFCDL(11,11), + DFCDL(12,12), + DFCDL(13,13), + DFCDL(14,14), + DFCDL(15,15), + DFCDL(16,16), + DFCDL(17,17), + DFCDL(18,18), + DFCDL(19,19), + DFCDL(20,20), + DFCDL(21,21), + DFCDL(22,22), + DFCDL(23,23), + DFCDL(24,24), + DFCDL(25,25), + DFCDL(26,26), + DFCDL(27,27), + DFCDL(28,28), + DFCDL(29,29), + DFCDL(30,30), + DFCDL(31,31), + DFCDL(32,32), + DFCDL(33,33), + DFCDL(34,34), + DFCDL(35,35), + DFCDL(36,36), + DFCDL(37,37), + DFCDL(38,38), + DFCDL(39,39), + DFCDL(40,40), + DFCDL(41,41), + DFCDL(42,42), + DFCDL(43,43), + DFCDL(44,44), + DFCDL(45,45), + DFCDL(46,46), + DFCDL(47,47), + DFCDL(48,48), + DFCDL(49,49), + DFCDL(50,50), + DFCDL(51,51), + DFCDL(52,52), + DFCDL(53,53), + DFCDL(54,54), + DFCDL(55,55), + DFCDL(56,56), + DFCDL(57,57), + DFCDL(58,58), + DFCDL(59,59), + DFCDL(60,60), + DFCDL(61,61), + DFCDL(62,62), + DFCDL(63,63) }; + +void mv_eth_phy_init(void) +{ + int i; + + MV_REG_WRITE(ETH_PHY_DFCDL_ADDR_REG, 0); + + for (i = 0 ; i < 64; i++) { + MV_REG_WRITE(ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); + } + + MV_REG_WRITE(ETH_PHY_DFCDL_CONFIG0_REG,0x300000); +} + +void mv6446x_eth_initialize (bd_t * bis) +{ + struct eth_device *dev; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + int devnum, x, temp; + char *s, *e, buf[64]; + +/* P3M750 only + * Set RGMII clock drives strength + */ + temp = MV_REG_READ(0x20A0); + temp |= 0x04000080; + MV_REG_WRITE(0x20A0, temp); + + mv_eth_phy_init(); + + for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) { + dev = calloc (sizeof (*dev), 1); + if (!dev) { + printf ("%s: mv_enet%d allocation failure, %s\n", + __FUNCTION__, devnum, "eth_device structure"); + return; + } + + /* must be less than NAMESIZE (16) */ + sprintf (dev->name, "mv_enet%d", devnum); + +#ifdef DEBUG + printf ("Initializing %s\n", dev->name); +#endif + + /* Extract the MAC address from the environment */ + switch (devnum) { + case 0: + s = "ethaddr"; + break; + + case 1: + s = "eth1addr"; + break; + + case 2: + s = "eth2addr"; + break; + + default: /* this should never happen */ + printf ("%s: Invalid device number %d\n", + __FUNCTION__, devnum); + return; + } + + temp = getenv_r (s, buf, sizeof (buf)); + s = (temp > 0) ? buf : NULL; + +#ifdef DEBUG + printf ("Setting MAC %d to %s\n", devnum, s); +#endif + for (x = 0; x < 6; ++x) { + dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + /* ronen - set the MAC addr in the HW */ + eth_port_uc_addr_set (devnum, dev->enetaddr, 0); + + dev->init = (void *) db64460_eth_probe; + dev->halt = (void *) ethernet_phy_reset; + dev->send = (void *) db64460_eth_transmit; + dev->recv = (void *) db64460_eth_poll; + + ethernet_private = calloc (sizeof (*ethernet_private), 1); + dev->priv = (void *)ethernet_private; + if (!ethernet_private) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Private Device Structure"); + free (dev); + return; + } + /* start with an zeroed ETH_PORT_INFO */ + memset (ethernet_private, 0, sizeof (ETH_PORT_INFO)); + memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); + + /* set pointer to memory for stats data structure etc... */ + port_private = calloc (sizeof (*ethernet_private), 1); + ethernet_private->port_private = (void *)port_private; + if (!port_private) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Port Private Device Structure"); + + free (ethernet_private); + free (dev); + return; + } + + port_private->stats = + calloc (sizeof (struct net_device_stats), 1); + if (!port_private->stats) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Net stat Structure"); + + free (port_private); + free (ethernet_private); + free (dev); + return; + } + memset (ethernet_private->port_private, 0, + sizeof (struct mv64460_eth_priv)); + switch (devnum) { + case 0: + ethernet_private->port_num = ETH_0; + break; + case 1: + ethernet_private->port_num = ETH_1; + break; + case 2: + ethernet_private->port_num = ETH_2; + break; + default: + printf ("Invalid device number %d\n", devnum); + break; + }; + + port_private->port_num = devnum; + /* + * Read MIB counter on the GT in order to reset them, + * then zero all the stats fields in memory + */ + mv64460_eth_update_stat (dev); + memset (port_private->stats, 0, + sizeof (struct net_device_stats)); + /* Extract the MAC address from the environment */ + switch (devnum) { + case 0: + s = "ethaddr"; + break; + + case 1: + s = "eth1addr"; + break; + + case 2: + s = "eth2addr"; + break; + + default: /* this should never happen */ + printf ("%s: Invalid device number %d\n", + __FUNCTION__, devnum); + return; + } + + temp = getenv_r (s, buf, sizeof (buf)); + s = (temp > 0) ? buf : NULL; + +#ifdef DEBUG + printf ("Setting MAC %d to %s\n", devnum, s); +#endif + for (x = 0; x < 6; ++x) { + dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + + DP (printf ("Allocating descriptor and buffer rings\n")); + + ethernet_private->p_rx_desc_area_base[0] = + (ETH_RX_DESC *) memalign (16, + RX_DESC_ALIGNED_SIZE * + MV64460_RX_QUEUE_SIZE + 1); + ethernet_private->p_tx_desc_area_base[0] = + (ETH_TX_DESC *) memalign (16, + TX_DESC_ALIGNED_SIZE * + MV64460_TX_QUEUE_SIZE + 1); + + ethernet_private->p_rx_buffer_base[0] = + (char *) memalign (16, + MV64460_RX_QUEUE_SIZE * + MV64460_TX_BUFFER_SIZE + 1); + ethernet_private->p_tx_buffer_base[0] = + (char *) memalign (16, + MV64460_RX_QUEUE_SIZE * + MV64460_TX_BUFFER_SIZE + 1); + +#ifdef DEBUG_MV_ETH + /* DEBUG OUTPUT prints adresses of globals */ + print_globals (dev); +#endif + eth_register (dev); + + miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write); + } + DP (printf ("%s: exit\n", __FUNCTION__)); + +} + +/********************************************************************** + * mv64460_eth_open + * + * This function is called when openning the network device. The function + * should initialize all the hardware, initialize cyclic Rx/Tx + * descriptors chain and buffers and allocate an IRQ to the network + * device. + * + * Input : a pointer to the network device structure + * / / ronen - changed the output to match net/eth.c needs + * Output : nonzero of success , zero if fails. + * under construction + **********************************************************************/ + +int mv64460_eth_open (struct eth_device *dev) +{ + return (mv64460_eth_real_open (dev)); +} + +/* Helper function for mv64460_eth_open */ +static int mv64460_eth_real_open (struct eth_device *dev) +{ + + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + u32 port_status; + ushort reg_short; + int speed; + int duplex; + int i; + int reg; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + /* ronen - when we update the MAC env params we only update dev->enetaddr + see ./net/eth.c eth_set_enetaddr() */ + memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); + + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Stop RX Queues */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Clear the ethernet port interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); + + /* Unmask RX buffer and TX end interrupt */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), + INT_CAUSE_UNMASK_ALL); + + /* Unmask phy and link status changes interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), + INT_CAUSE_UNMASK_ALL_EXT); + + /* Set phy address of the port */ + ethernet_private->port_phy_addr = 0x1 + (port_num << 1); + reg = ethernet_private->port_phy_addr; + + /* Activate the DMA channels etc */ + eth_port_init (ethernet_private); + + /* "Allocate" setup TX rings */ + + for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { + unsigned int size; + + port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE; + size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */ + ethernet_private->tx_desc_area_size[queue] = size; + + /* first clear desc area completely */ + memset ((void *) ethernet_private->p_tx_desc_area_base[queue], + 0, ethernet_private->tx_desc_area_size[queue]); + + /* initialize tx desc ring with low level driver */ + if (ether_init_tx_desc_ring + (ethernet_private, ETH_Q0, + port_private->tx_ring_size[queue], + MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , + (unsigned int) ethernet_private-> + p_tx_desc_area_base[queue], + (unsigned int) ethernet_private-> + p_tx_buffer_base[queue]) == false) + printf ("### Error initializing TX Ring\n"); + } + + /* "Allocate" setup RX rings */ + for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { + unsigned int size; + + /* Meantime RX Ring are fixed - but must be configurable by user */ + port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE; + size = (port_private->rx_ring_size[queue] * + RX_DESC_ALIGNED_SIZE); + ethernet_private->rx_desc_area_size[queue] = size; + + /* first clear desc area completely */ + memset ((void *) ethernet_private->p_rx_desc_area_base[queue], + 0, ethernet_private->rx_desc_area_size[queue]); + if ((ether_init_rx_desc_ring + (ethernet_private, ETH_Q0, + port_private->rx_ring_size[queue], + MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , + (unsigned int) ethernet_private-> + p_rx_desc_area_base[queue], + (unsigned int) ethernet_private-> + p_rx_buffer_base[queue])) == false) + printf ("### Error initializing RX Ring\n"); + } + + eth_port_start (ethernet_private); + + /* Set maximum receive buffer to 9700 bytes */ + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num), + (0x5 << 17) | + (MV_REG_READ + (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num)) + & 0xfff1ffff)); + + /* + * Set ethernet MTU for leaky bucket mechanism to 0 - this will + * disable the leaky bucket mechanism . + */ + + MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0); + port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); + +#if defined(CONFIG_PHY_RESET) + /* + * Reset the phy, only if its the first time through + * otherwise, just check the speeds & feeds + */ + if (port_private->first_init == 0) { + port_private->first_init = 1; + ethernet_phy_reset (port_num); + + /* Start/Restart autonegotiation */ + phy_setup_aneg (dev->name, reg); + udelay (1000); + } +#endif /* defined(CONFIG_PHY_RESET) */ + + miiphy_read (dev->name, reg, PHY_BMSR, ®_short); + + /* + * Wait if PHY is capable of autonegotiation and autonegotiation is not complete + */ + if ((reg_short & PHY_BMSR_AUTN_ABLE) + && !(reg_short & PHY_BMSR_AUTN_COMP)) { + puts ("Waiting for PHY auto negotiation to complete"); + i = 0; + while (!(reg_short & PHY_BMSR_AUTN_COMP)) { + /* + * Timeout reached ? + */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts (" TIMEOUT !\n"); + break; + } + + if ((i++ % 1000) == 0) { + putc ('.'); + } + udelay (1000); /* 1 ms */ + miiphy_read (dev->name, reg, PHY_BMSR, ®_short); + + } + puts (" done\n"); + udelay (500000); /* another 500 ms (results in faster booting) */ + } + + speed = miiphy_speed (dev->name, reg); + duplex = miiphy_duplex (dev->name, reg); + + printf ("ENET Speed is %d Mbps - %s duplex connection\n", + (int) speed, (duplex == HALF) ? "HALF" : "FULL"); + + port_private->eth_running = MAGIC_ETH_RUNNING; + return 1; +} + + +static int mv64460_eth_free_tx_rings (struct eth_device *dev) +{ + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + volatile ETH_TX_DESC *p_tx_curr_desc; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Stop Tx Queues */ + MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Free TX rings */ + DP (printf ("Clearing previously allocated TX queues... ")); + for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { + /* Free on TX rings */ + for (p_tx_curr_desc = + ethernet_private->p_tx_desc_area_base[queue]; + ((unsigned int) p_tx_curr_desc <= (unsigned int) + ethernet_private->p_tx_desc_area_base[queue] + + ethernet_private->tx_desc_area_size[queue]); + p_tx_curr_desc = + (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc + + TX_DESC_ALIGNED_SIZE)) { + /* this is inside for loop */ + if (p_tx_curr_desc->return_info != 0) { + p_tx_curr_desc->return_info = 0; + DP (printf ("freed\n")); + } + } + DP (printf ("Done\n")); + } + return 0; +} + +static int mv64460_eth_free_rx_rings (struct eth_device *dev) +{ + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + volatile ETH_RX_DESC *p_rx_curr_desc; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + + /* Stop RX Queues */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Free RX rings */ + DP (printf ("Clearing previously allocated RX queues... ")); + for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { + /* Free preallocated skb's on RX rings */ + for (p_rx_curr_desc = + ethernet_private->p_rx_desc_area_base[queue]; + (((unsigned int) p_rx_curr_desc < + ((unsigned int) ethernet_private-> + p_rx_desc_area_base[queue] + + ethernet_private->rx_desc_area_size[queue]))); + p_rx_curr_desc = + (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc + + RX_DESC_ALIGNED_SIZE)) { + if (p_rx_curr_desc->return_info != 0) { + p_rx_curr_desc->return_info = 0; + DP (printf ("freed\n")); + } + } + DP (printf ("Done\n")); + } + return 0; +} + +/********************************************************************** + * mv64460_eth_stop + * + * This function is used when closing the network device. + * It updates the hardware, + * release all memory that holds buffers and descriptors and release the IRQ. + * Input : a pointer to the device structure + * Output : zero if success , nonzero if fails + *********************************************************************/ + +int mv64460_eth_stop (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Disable all gigE address decoder */ + MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f); + DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__)); + mv64460_eth_real_stop (dev); + + return 0; +}; + +/* Helper function for mv64460_eth_stop */ + +static int mv64460_eth_real_stop (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + mv64460_eth_free_tx_rings (dev); + mv64460_eth_free_rx_rings (dev); + + eth_port_reset (ethernet_private->port_num); + /* Disable ethernet port interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); + /* Mask RX buffer and TX end interrupt */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0); + /* Mask phy and link status changes interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0); + MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH, + BIT0 << port_num); + /* Print Network statistics */ +#ifndef UPDATE_STATS_BY_SOFTWARE + /* + * Print statistics (only if ethernet is running), + * then zero all the stats fields in memory + */ + if (port_private->eth_running == MAGIC_ETH_RUNNING) { + port_private->eth_running = 0; + mv64460_eth_print_stat (dev); + } + memset (port_private->stats, 0, sizeof (struct net_device_stats)); +#endif + DP (printf ("\nEthernet stopped ... \n")); + return 0; +} + + +/********************************************************************** + * mv64460_eth_start_xmit + * + * This function is queues a packet in the Tx descriptor for + * required port. + * + * Input : skb - a pointer to socket buffer + * dev - a pointer to the required port + * + * Output : zero upon success + **********************************************************************/ + +int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, + int dataSize) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + PKT_INFO pkt_info; + ETH_FUNC_RET_STATUS status; + struct net_device_stats *stats; + ETH_FUNC_RET_STATUS release_result; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + stats = port_private->stats; + + /* Update packet info data structure */ + pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ + pkt_info.byte_cnt = dataSize; + pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; + + status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); + if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { + printf ("Error on transmitting packet .."); + if (status == ETH_QUEUE_FULL) + printf ("ETH Queue is full. \n"); + if (status == ETH_QUEUE_LAST_RESOURCE) + printf ("ETH Queue: using last available resource. \n"); + goto error; + } + + /* Update statistics and start of transmittion time */ + stats->tx_bytes += dataSize; + stats->tx_packets++; + + /* Check if packet(s) is(are) transmitted correctly (release everything) */ + do { + release_result = + eth_tx_return_desc (ethernet_private, ETH_Q0, + &pkt_info); + switch (release_result) { + case ETH_OK: + DP (printf ("descriptor released\n")); + if (pkt_info.cmd_sts & BIT0) { + printf ("Error in TX\n"); + stats->tx_errors++; + } + break; + case ETH_RETRY: + DP (printf ("transmission still in process\n")); + break; + + case ETH_ERROR: + printf ("routine can not access Tx desc ring\n"); + break; + + case ETH_END_OF_JOB: + DP (printf ("the routine has nothing to release\n")); + break; + default: /* should not happen */ + break; + } + } while (release_result == ETH_OK); + + return 0; /* success */ + + error: + return 1; /* Failed - higher layers will free the skb */ +} + +/********************************************************************** + * mv64460_eth_receive + * + * This function is forward packets that are received from the port's + * queues toward kernel core or FastRoute them to another interface. + * + * Input : dev - a pointer to the required interface + * max - maximum number to receive (0 means unlimted) + * + * Output : number of served packets + **********************************************************************/ + +int mv64460_eth_receive (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + PKT_INFO pkt_info; + struct net_device_stats *stats; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) { +#ifdef DEBUG_MV_ETH + if (pkt_info.byte_cnt != 0) { + printf ("%s: Received %d byte Packet @ 0x%x\n", + __FUNCTION__, pkt_info.byte_cnt, + pkt_info.buf_ptr); + if(pkt_info.buf_ptr != 0){ + for(i=0; i < pkt_info.byte_cnt; i++){ + if((i % 4) == 0){ + printf("\n0x"); + } + printf("%02x", ((char*)pkt_info.buf_ptr)[i]); + } + printf("\n"); + } + } +#endif + /* Update statistics. Note byte count includes 4 byte CRC count */ + stats->rx_packets++; + stats->rx_bytes += pkt_info.byte_cnt; + + /* + * In case received a packet without first / last bits on OR the error + * summary bit is on, the packets needs to be dropeed. + */ + if (((pkt_info. + cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) != + (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) + || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) { + stats->rx_dropped++; + + printf ("Received packet spread on multiple descriptors\n"); + + /* Is this caused by an error ? */ + if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) { + stats->rx_errors++; + } + + /* free these descriptors again without forwarding them to the higher layers */ + pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ + pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ + + if (eth_rx_return_buff + (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { + printf ("Error while returning the RX Desc to Ring\n"); + } else { + DP (printf ("RX Desc returned to Ring\n")); + } + /* /free these descriptors again */ + } else { + +/* !!! call higher layer processing */ +#ifdef DEBUG_MV_ETH + printf ("\nNow send it to upper layer protocols (NetReceive) ...\n"); +#endif + /* let the upper layer handle the packet */ + NetReceive ((uchar *) pkt_info.buf_ptr, + (int) pkt_info.byte_cnt); + +/* **************************************************************** */ +/* free descriptor */ + pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ + pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ + DP (printf ("RX: pkt_info.buf_ptr = %x\n", pkt_info.buf_ptr)); + if (eth_rx_return_buff + (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { + printf ("Error while returning the RX Desc to Ring\n"); + } else { + DP (printf ("RX: Desc returned to Ring\n")); + } + +/* **************************************************************** */ + + } + } + mv64460_eth_get_stats (dev); /* update statistics */ + return 1; +} + +/********************************************************************** + * mv64460_eth_get_stats + * + * Returns a pointer to the interface statistics. + * + * Input : dev - a pointer to the required interface + * + * Output : a pointer to the interface's statistics + **********************************************************************/ + +static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + mv64460_eth_update_stat (dev); + + return port_private->stats; +} + + +/********************************************************************** + * mv64460_eth_update_stat + * + * Update the statistics structure in the private data structure + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ + +static void mv64460_eth_update_stat (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + struct net_device_stats *stats; + unsigned int port_num; + volatile unsigned int dummy; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + /* These are false updates */ + stats->rx_packets += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_FRAMES_RECEIVED); + stats->tx_packets += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_FRAMES_SENT); + stats->rx_bytes += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_RECEIVED_LOW); + /* + * Ideally this should be as follows - + * + * stats->rx_bytes += stats->rx_bytes + + * ((unsigned long) ethReadMibCounter (ethernet_private->port_num , + * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32); + * + * But the unsigned long in PowerPC and MIPS are 32bit. So the next read + * is just a dummy read for proper work of the GigE port + */ + dummy = eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH); + stats->tx_bytes += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_SENT_LOW); + dummy = eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_SENT_HIGH); + stats->rx_errors += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_MAC_RECEIVE_ERROR); + + /* Rx dropped is for received packet with CRC error */ + stats->rx_dropped += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_BAD_CRC_EVENT); + stats->multicast += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_MULTICAST_FRAMES_RECEIVED); + stats->collisions += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_COLLISION) + + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_LATE_COLLISION); + /* detailed rx errors */ + stats->rx_length_errors += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_UNDERSIZE_RECEIVED) + + + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_OVERSIZE_RECEIVED); + /* detailed tx errors */ +} + +#ifndef UPDATE_STATS_BY_SOFTWARE +/********************************************************************** + * mv64460_eth_print_stat + * + * Update the statistics structure in the private data structure + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ + +static void mv64460_eth_print_stat (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + struct net_device_stats *stats; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + /* These are false updates */ + printf ("\n### Network statistics: ###\n"); + printf ("--------------------------\n"); + printf (" Packets received: %ld\n", stats->rx_packets); + printf (" Packets send: %ld\n", stats->tx_packets); + printf (" Received bytes: %ld\n", stats->rx_bytes); + printf (" Send bytes: %ld\n", stats->tx_bytes); + if (stats->rx_errors != 0) + printf (" Rx Errors: %ld\n", + stats->rx_errors); + if (stats->rx_dropped != 0) + printf (" Rx dropped (CRC Errors): %ld\n", + stats->rx_dropped); + if (stats->multicast != 0) + printf (" Rx mulicast frames: %ld\n", + stats->multicast); + if (stats->collisions != 0) + printf (" No. of collisions: %ld\n", + stats->collisions); + if (stats->rx_length_errors != 0) + printf (" Rx length errors: %ld\n", + stats->rx_length_errors); +} +#endif + +/************************************************************************** + *network_start - Network Kick Off Routine UBoot + *Inputs : + *Outputs : + **************************************************************************/ + +bool db64460_eth_start (struct eth_device *dev) +{ + return (mv64460_eth_open (dev)); /* calls real open */ +} + +/************************************************************************* +************************************************************************** +************************************************************************** +* The second part is the low level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ +/* + * based on Linux code + * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/******************************************************************************** + * Marvell's Gigabit Ethernet controller low level driver + * + * DESCRIPTION: + * This file introduce low level API to Marvell's Gigabit Ethernet + * controller. This Gigabit Ethernet Controller driver API controls + * 1) Operations (i.e. port init, start, reset etc'). + * 2) Data flow (i.e. port send, receive etc'). + * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO + * struct. + * This struct includes user configuration information as well as + * driver internal data needed for its operations. + * + * Supported Features: + * - This low level driver is OS independent. Allocating memory for + * the descriptor rings and buffers are not within the scope of + * this driver. + * - The user is free from Rx/Tx queue managing. + * - This low level driver introduce functionality API that enable + * the to operate Marvell's Gigabit Ethernet Controller in a + * convenient way. + * - Simple Gigabit Ethernet port operation API. + * - Simple Gigabit Ethernet port data flow API. + * - Data flow and operation API support per queue functionality. + * - Support cached descriptors for better performance. + * - Enable access to all four DRAM banks and internal SRAM memory + * spaces. + * - PHY access and control API. + * - Port control register configuration API. + * - Full control over Unicast and Multicast MAC configurations. + * + * Operation flow: + * + * Initialization phase + * This phase complete the initialization of the ETH_PORT_INFO + * struct. + * User information regarding port configuration has to be set + * prior to calling the port initialization routine. For example, + * the user has to assign the port_phy_addr field which is board + * depended parameter. + * In this phase any port Tx/Rx activity is halted, MIB counters + * are cleared, PHY address is set according to user parameter and + * access to DRAM and internal SRAM memory spaces. + * + * Driver ring initialization + * Allocating memory for the descriptor rings and buffers is not + * within the scope of this driver. Thus, the user is required to + * allocate memory for the descriptors ring and buffers. Those + * memory parameters are used by the Rx and Tx ring initialization + * routines in order to curve the descriptor linked list in a form + * of a ring. + * Note: Pay special attention to alignment issues when using + * cached descriptors/buffers. In this phase the driver store + * information in the ETH_PORT_INFO struct regarding each queue + * ring. + * + * Driver start + * This phase prepares the Ethernet port for Rx and Tx activity. + * It uses the information stored in the ETH_PORT_INFO struct to + * initialize the various port registers. + * + * Data flow: + * All packet references to/from the driver are done using PKT_INFO + * struct. + * This struct is a unified struct used with Rx and Tx operations. + * This way the user is not required to be familiar with neither + * Tx nor Rx descriptors structures. + * The driver's descriptors rings are management by indexes. + * Those indexes controls the ring resources and used to indicate + * a SW resource error: + * 'current' + * This index points to the current available resource for use. For + * example in Rx process this index will point to the descriptor + * that will be passed to the user upon calling the receive routine. + * In Tx process, this index will point to the descriptor + * that will be assigned with the user packet info and transmitted. + * 'used' + * This index points to the descriptor that need to restore its + * resources. For example in Rx process, using the Rx buffer return + * API will attach the buffer returned in packet info to the + * descriptor pointed by 'used'. In Tx process, using the Tx + * descriptor return will merely return the user packet info with + * the command status of the transmitted buffer pointed by the + * 'used' index. Nevertheless, it is essential to use this routine + * to update the 'used' index. + * 'first' + * This index supports Tx Scatter-Gather. It points to the first + * descriptor of a packet assembled of multiple buffers. For example + * when in middle of Such packet we have a Tx resource error the + * 'curr' index get the value of 'first' to indicate that the ring + * returned to its state before trying to transmit this packet. + * + * Receive operation: + * The eth_port_receive API set the packet information struct, + * passed by the caller, with received information from the + * 'current' SDMA descriptor. + * It is the user responsibility to return this resource back + * to the Rx descriptor ring to enable the reuse of this source. + * Return Rx resource is done using the eth_rx_return_buff API. + * + * Transmit operation: + * The eth_port_send API supports Scatter-Gather which enables to + * send a packet spanned over multiple buffers. This means that + * for each packet info structure given by the user and put into + * the Tx descriptors ring, will be transmitted only if the 'LAST' + * bit will be set in the packet info command status field. This + * API also consider restriction regarding buffer alignments and + * sizes. + * The user must return a Tx resource after ensuring the buffer + * has been transmitted to enable the Tx ring indexes to update. + * + * BOARD LAYOUT + * This device is on-board. No jumper diagram is necessary. + * + * EXTERNAL INTERFACE + * + * Prior to calling the initialization routine eth_port_init() the user + * must set the following fields under ETH_PORT_INFO struct: + * port_num User Ethernet port number. + * port_phy_addr User PHY address of Ethernet port. + * port_mac_addr[6] User defined port MAC address. + * port_config User port configuration value. + * port_config_extend User port config extend value. + * port_sdma_config User port SDMA config value. + * port_serial_control User port serial control value. + * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. + * *port_private User scratch pad for user specific data structures. + * + * This driver introduce a set of default values: + * PORT_CONFIG_VALUE Default port configuration value + * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value + * PORT_SDMA_CONFIG_VALUE Default sdma control value + * PORT_SERIAL_CONTROL_VALUE Default port serial control value + * + * This driver data flow is done using the PKT_INFO struct which is + * a unified struct for Rx and Tx operations: + * byte_cnt Tx/Rx descriptor buffer byte count. + * l4i_chk CPU provided TCP Checksum. For Tx operation only. + * cmd_sts Tx/Rx descriptor command status. + * buf_ptr Tx/Rx descriptor buffer pointer. + * return_info Tx/Rx user resource return information. + * + * + * EXTERNAL SUPPORT REQUIREMENTS + * + * This driver requires the following external support: + * + * D_CACHE_FLUSH_LINE (address, address offset) + * + * This macro applies assembly code to flush and invalidate cache + * line. + * address - address base. + * address offset - address offset + * + * + * CPU_PIPE_FLUSH + * + * This macro applies assembly code to flush the CPU pipeline. + * + *******************************************************************************/ +/* includes */ + +/* defines */ +/* SDMA command macros */ +#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \ + MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue)) + +#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \ + MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\ + (1 << (8 + tx_queue))) + +#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \ +MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue)) + +#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \ +MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue))) + +#define CURR_RFD_GET(p_curr_desc, queue) \ + ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue]) + +#define CURR_RFD_SET(p_curr_desc, queue) \ + (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc)) + +#define USED_RFD_GET(p_used_desc, queue) \ + ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue]) + +#define USED_RFD_SET(p_used_desc, queue)\ +(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc)) + + +#define CURR_TFD_GET(p_curr_desc, queue) \ + ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue]) + +#define CURR_TFD_SET(p_curr_desc, queue) \ + (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc)) + +#define USED_TFD_GET(p_used_desc, queue) \ + ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue]) + +#define USED_TFD_SET(p_used_desc, queue) \ + (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc)) + +#define FIRST_TFD_GET(p_first_desc, queue) \ + ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue]) + +#define FIRST_TFD_SET(p_first_desc, queue) \ + (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc)) + + +/* Macros that save access to desc in order to find next desc pointer */ +#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + +#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + +#define LINK_UP_TIMEOUT 100000 +#define PHY_BUSY_TIMEOUT 10000000 + +/* locals */ + +/* PHY routines */ +static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr); +static int ethernet_phy_get (ETH_PORT eth_port_num); + +/* Ethernet Port routines */ +static void eth_set_access_control (ETH_PORT eth_port_num, + ETH_WIN_PARAM * param); +static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble, + ETH_QUEUE queue, int option); +#if 0 /* FIXME */ +static bool eth_port_smc_addr (ETH_PORT eth_port_num, + unsigned char mc_byte, + ETH_QUEUE queue, int option); +static bool eth_port_omc_addr (ETH_PORT eth_port_num, + unsigned char crc8, + ETH_QUEUE queue, int option); +#endif + +static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, + int byte_count); + +void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl); + + +typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK; +u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank) +{ + u32 result = 0; + u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); + + if (enable & (1 << bank)) + return 0; + if (bank == BANK0) + result = MV_REG_READ (MV64460_CS_0_BASE_ADDR); + if (bank == BANK1) + result = MV_REG_READ (MV64460_CS_1_BASE_ADDR); + if (bank == BANK2) + result = MV_REG_READ (MV64460_CS_2_BASE_ADDR); + if (bank == BANK3) + result = MV_REG_READ (MV64460_CS_3_BASE_ADDR); + result &= 0x0000ffff; + result = result << 16; + return result; +} + +u32 mv_get_dram_bank_size (MEMORY_BANK bank) +{ + u32 result = 0; + u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); + + if (enable & (1 << bank)) + return 0; + if (bank == BANK0) + result = MV_REG_READ (MV64460_CS_0_SIZE); + if (bank == BANK1) + result = MV_REG_READ (MV64460_CS_1_SIZE); + if (bank == BANK2) + result = MV_REG_READ (MV64460_CS_2_SIZE); + if (bank == BANK3) + result = MV_REG_READ (MV64460_CS_3_SIZE); + result += 1; + result &= 0x0000ffff; + result = result << 16; + return result; +} + +u32 mv_get_internal_sram_base (void) +{ + u32 result; + + result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR); + result &= 0x0000ffff; + result = result << 16; + return result; +} + +/******************************************************************************* +* eth_port_init - Initialize the Ethernet port driver +* +* DESCRIPTION: +* This function prepares the ethernet port to start its activity: +* 1) Completes the ethernet port driver struct initialization toward port +* start routine. +* 2) Resets the device to a quiescent state in case of warm reboot. +* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. +* 4) Clean MAC tables. The reset status of those tables is unknown. +* 5) Set PHY address. +* Note: Call this routine prior to eth_port_start routine and after setting +* user values in the user fields of Ethernet port control struct (i.e. +* port_phy_addr). +* +* INPUT: +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* +* OUTPUT: +* See description. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) +{ + int queue; + ETH_WIN_PARAM win_param; + + p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE; + p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE; + p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE; + p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE; + + p_eth_port_ctrl->port_rx_queue_command = 0; + p_eth_port_ctrl->port_tx_queue_command = 0; + + /* Zero out SW structs */ + for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { + CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); + USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); + p_eth_port_ctrl->rx_resource_err[queue] = false; + } + + for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { + CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + p_eth_port_ctrl->tx_resource_err[queue] = false; + } + + eth_port_reset (p_eth_port_ctrl->port_num); + + /* Set access parameters for DRAM bank 0 */ + win_param.win = ETH_WIN0; /* Use Ethernet window 0 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK0); + win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 1 */ + win_param.win = ETH_WIN1; /* Use Ethernet window 1 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK1); + win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 2 */ + win_param.win = ETH_WIN2; /* Use Ethernet window 2 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK2); + win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 3 */ + win_param.win = ETH_WIN3; /* Use Ethernet window 3 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK3); + win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for Internal SRAM */ + win_param.win = ETH_WIN4; /* Use Ethernet window 0 */ + win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */ + win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0; + win_param.high_addr = 0; + win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */ + win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */ + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + eth_port_init_mac_tables (p_eth_port_ctrl->port_num); + + ethernet_phy_set (p_eth_port_ctrl->port_num, + p_eth_port_ctrl->port_phy_addr); + + return; + +} + +/******************************************************************************* +* eth_port_start - Start the Ethernet port activity. +* +* DESCRIPTION: +* This routine prepares the Ethernet port for Rx and Tx activity: +* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that +* has been initialized a descriptor's ring (using ether_init_tx_desc_ring +* for Tx and ether_init_rx_desc_ring for Rx) +* 2. Initialize and enable the Ethernet configuration port by writing to +* the port's configuration and command registers. +* 3. Initialize and enable the SDMA by writing to the SDMA's +* configuration and command registers. +* After completing these steps, the ethernet port SDMA can starts to +* perform Rx and Tx activities. +* +* Note: Each Rx and Tx queue descriptor's list must be initialized prior +* to calling this function (use ether_init_tx_desc_ring for Tx queues and +* ether_init_rx_desc_ring for Rx queues). +* +* INPUT: +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* +* OUTPUT: +* Ethernet port is ready to receive and transmit. +* +* RETURN: +* false if the port PHY is not up. +* true otherwise. +* +*******************************************************************************/ +static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) +{ + int queue; + volatile ETH_TX_DESC *p_tx_curr_desc; + volatile ETH_RX_DESC *p_rx_curr_desc; + unsigned int phy_reg_data; + ETH_PORT eth_port_num = p_eth_port_ctrl->port_num; + + + /* Assignment of Tx CTRP of given queue */ + for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { + CURR_TFD_GET (p_tx_curr_desc, queue); + MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0 + (eth_port_num) + + (4 * queue)), + ((unsigned int) p_tx_curr_desc)); + + } + + /* Assignment of Rx CRDP of given queue */ + for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { + CURR_RFD_GET (p_rx_curr_desc, queue); + MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0 + (eth_port_num) + + (4 * queue)), + ((unsigned int) p_rx_curr_desc)); + + if (p_rx_curr_desc != NULL) + /* Add the assigned Ethernet address to the port's address table */ + eth_port_uc_addr_set (p_eth_port_ctrl->port_num, + p_eth_port_ctrl->port_mac_addr, + queue); + } + + /* Assign port configuration and command. */ + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), + p_eth_port_ctrl->port_config); + + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), + p_eth_port_ctrl->port_config_extend); + + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + p_eth_port_ctrl->port_serial_control); + + MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + ETH_SERIAL_PORT_ENABLE); + + /* Assign port SDMA configuration */ + MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), + p_eth_port_ctrl->port_sdma_config); + + MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT + (eth_port_num), 0x3fffffff); + MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG + (eth_port_num), 0x03fffcff); + /* Turn off the port/queue bandwidth limitation */ + MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0); + + /* Enable port Rx. */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num), + p_eth_port_ctrl->port_rx_queue_command); + + /* Check if link is up */ + eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); + + if (!(phy_reg_data & 0x20)) + return false; + + return true; +} + +/******************************************************************************* +* eth_port_uc_addr_set - This function Set the port Unicast address. +* +* DESCRIPTION: +* This function Set the port Ethernet MAC address. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* char * p_addr Address to be set +* ETH_QUEUE queue Rx queue number for this MAC address. +* +* OUTPUT: +* Set MAC address low and high registers. also calls eth_port_uc_addr() +* To set the unicast table with the proper information. +* +* RETURN: +* N/A. +* +*******************************************************************************/ +static void eth_port_uc_addr_set (ETH_PORT eth_port_num, + unsigned char *p_addr, ETH_QUEUE queue) +{ + unsigned int mac_h; + unsigned int mac_l; + + mac_l = (p_addr[4] << 8) | (p_addr[5]); + mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | + (p_addr[2] << 8) | (p_addr[3] << 0); + + MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l); + MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h); + + /* Accept frames of this address */ + eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR); + + return; +} + +/******************************************************************************* +* eth_port_uc_addr - This function Set the port unicast address table +* +* DESCRIPTION: +* This function locates the proper entry in the Unicast table for the +* specified MAC nibble and sets its properties according to function +* parameters. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char uc_nibble Unicast MAC Address last nibble. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* This function add/removes MAC addresses from the port unicast address +* table. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_uc_addr (ETH_PORT eth_port_num, + unsigned char uc_nibble, + ETH_QUEUE queue, int option) +{ + unsigned int unicast_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the Unicast table entry */ + uc_nibble = (0xf & uc_nibble); + tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */ + reg_offset = uc_nibble % 4; /* Entry offset within the above register */ + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified unicast DA table entry */ + unicast_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset)); + + unicast_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset), unicast_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at unicast DA filter table entry */ + unicast_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset)); + + unicast_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset), unicast_reg); + + break; + + default: + return false; + } + return true; +} + +#if 0 /* FIXME */ +/******************************************************************************* +* eth_port_mc_addr - Multicast address settings. +* +* DESCRIPTION: +* This API controls the MV device MAC multicast support. +* The MV device supports multicast using two tables: +* 1) Special Multicast Table for MAC addresses of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* In this case, the function calls eth_port_smc_addr() routine to set the +* Special Multicast Table. +* 2) Other Multicast Table for multicast of another type. A CRC-8bit +* is used as an index to the Other Multicast Table entries in the +* DA-Filter table. +* In this case, the function calculates the CRC-8bit value and calls +* eth_port_omc_addr() routine to set the Other Multicast Table. +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char *p_addr Unicast MAC Address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if add_address_table_entry( ) failed. +* +*******************************************************************************/ +static void eth_port_mc_addr (ETH_PORT eth_port_num, + unsigned char *p_addr, + ETH_QUEUE queue, int option) +{ + unsigned int mac_h; + unsigned int mac_l; + unsigned char crc_result = 0; + int mac_array[48]; + int crc[8]; + int i; + + + if ((p_addr[0] == 0x01) && + (p_addr[1] == 0x00) && + (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) + + eth_port_smc_addr (eth_port_num, p_addr[5], queue, option); + else { + /* Calculate CRC-8 out of the given address */ + mac_h = (p_addr[0] << 8) | (p_addr[1]); + mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) | + (p_addr[4] << 8) | (p_addr[5] << 0); + + for (i = 0; i < 32; i++) + mac_array[i] = (mac_l >> i) & 0x1; + for (i = 32; i < 48; i++) + mac_array[i] = (mac_h >> (i - 32)) & 0x1; + + + crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ + mac_array[39] ^ mac_array[35] ^ mac_array[34] ^ + mac_array[31] ^ mac_array[30] ^ mac_array[28] ^ + mac_array[23] ^ mac_array[21] ^ mac_array[19] ^ + mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ + mac_array[12] ^ mac_array[8] ^ mac_array[7] ^ + mac_array[6] ^ mac_array[0]; + + crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[41] ^ mac_array[39] ^ + mac_array[36] ^ mac_array[34] ^ mac_array[32] ^ + mac_array[30] ^ mac_array[29] ^ mac_array[28] ^ + mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ + mac_array[21] ^ mac_array[20] ^ mac_array[18] ^ + mac_array[17] ^ mac_array[16] ^ mac_array[15] ^ + mac_array[14] ^ mac_array[13] ^ mac_array[12] ^ + mac_array[9] ^ mac_array[6] ^ mac_array[1] ^ + mac_array[0]; + + crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[42] ^ mac_array[39] ^ + mac_array[37] ^ mac_array[34] ^ mac_array[33] ^ + mac_array[29] ^ mac_array[28] ^ mac_array[25] ^ + mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ + mac_array[15] ^ mac_array[13] ^ mac_array[12] ^ + mac_array[10] ^ mac_array[8] ^ mac_array[6] ^ + mac_array[2] ^ mac_array[1] ^ mac_array[0]; + + crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[40] ^ mac_array[38] ^ + mac_array[35] ^ mac_array[34] ^ mac_array[30] ^ + mac_array[29] ^ mac_array[26] ^ mac_array[25] ^ + mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ + mac_array[14] ^ mac_array[13] ^ mac_array[11] ^ + mac_array[9] ^ mac_array[7] ^ mac_array[3] ^ + mac_array[2] ^ mac_array[1]; + + crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ + mac_array[35] ^ mac_array[31] ^ mac_array[30] ^ + mac_array[27] ^ mac_array[26] ^ mac_array[24] ^ + mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ + mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ + mac_array[8] ^ mac_array[4] ^ mac_array[3] ^ + mac_array[2]; + + crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ + mac_array[42] ^ mac_array[40] ^ mac_array[37] ^ + mac_array[36] ^ mac_array[32] ^ mac_array[31] ^ + mac_array[28] ^ mac_array[27] ^ mac_array[25] ^ + mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ + mac_array[15] ^ mac_array[13] ^ mac_array[11] ^ + mac_array[9] ^ mac_array[5] ^ mac_array[4] ^ + mac_array[3]; + + crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ + mac_array[41] ^ mac_array[38] ^ mac_array[37] ^ + mac_array[33] ^ mac_array[32] ^ mac_array[29] ^ + mac_array[28] ^ mac_array[26] ^ mac_array[21] ^ + mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ + mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ + mac_array[6] ^ mac_array[5] ^ mac_array[4]; + + crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ + mac_array[39] ^ mac_array[38] ^ mac_array[34] ^ + mac_array[33] ^ mac_array[30] ^ mac_array[29] ^ + mac_array[27] ^ mac_array[22] ^ mac_array[20] ^ + mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ + mac_array[13] ^ mac_array[11] ^ mac_array[7] ^ + mac_array[6] ^ mac_array[5]; + + for (i = 0; i < 8; i++) + crc_result = crc_result | (crc[i] << i); + + eth_port_omc_addr (eth_port_num, crc_result, queue, option); + } + return; +} + +/******************************************************************************* +* eth_port_smc_addr - Special Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device special MAC multicast support. +* The Special Multicast Table for MAC addresses supports MAC of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* This function set the Special Multicast Table appropriate entry +* according to the argument given. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_smc_addr (ETH_PORT eth_port_num, + unsigned char mc_byte, + ETH_QUEUE queue, int option) +{ + unsigned int smc_table_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the SMC table entry */ + tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ + reg_offset = mc_byte % 4; /* Entry offset within the above register */ + queue &= 0x7; + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified Special DA table entry */ + smc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + smc_table_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at specified Special DA table entry */ + smc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + smc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); + break; + + default: + return false; + } + return true; +} + +/******************************************************************************* +* eth_port_omc_addr - Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device Other MAC multicast support. +* The Other Multicast Table is used for multicast of another type. +* A CRC-8bit is used as an index to the Other Multicast Table entries +* in the DA-Filter table. +* The function gets the CRC-8bit value from the calling routine and +* set the Other Multicast Table appropriate entry according to the +* CRC-8 argument given. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_omc_addr (ETH_PORT eth_port_num, + unsigned char crc8, + ETH_QUEUE queue, int option) +{ + unsigned int omc_table_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the OMC table entry */ + tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */ + reg_offset = crc8 % 4; /* Entry offset within the above register */ + queue &= 0x7; + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified Other DA table entry */ + omc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + omc_table_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at specified Other DA table entry */ + omc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + omc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); + break; + + default: + return false; + } + return true; +} +#endif + +/******************************************************************************* +* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables +* +* DESCRIPTION: +* Go through all the DA filter tables (Unicast, Special Multicast & Other +* Multicast) and set each entry to 0. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* Multicast and Unicast packets are rejected. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void eth_port_init_mac_tables (ETH_PORT eth_port_num) +{ + int table_index; + + /* Clear DA filter unicast table (Ex_dFUT) */ + for (table_index = 0; table_index <= 0xC; table_index += 4) + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + table_index), 0); + + for (table_index = 0; table_index <= 0xFC; table_index += 4) { + /* Clear DA filter special multicast table (Ex_dFSMT) */ + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); + /* Clear DA filter other multicast table (Ex_dFOMT) */ + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); + } +} + +/******************************************************************************* +* eth_clear_mib_counters - Clear all MIB counters +* +* DESCRIPTION: +* This function clears all MIB counters of a specific ethernet port. +* A read from the MIB counter will reset the counter. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* After reading all MIB counters, the counters resets. +* +* RETURN: +* MIB counter value. +* +*******************************************************************************/ +static void eth_clear_mib_counters (ETH_PORT eth_port_num) +{ + int i; + unsigned int dummy; + + /* Perform dummy reads from MIB counters */ + for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION; + i += 4) + dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE + (eth_port_num) + i)); + + return; +} + +/******************************************************************************* +* eth_read_mib_counter - Read a MIB counter +* +* DESCRIPTION: +* This function reads a MIB counter of a specific ethernet port. +* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the +* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH +* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and +* ETH_MIB_GOOD_OCTETS_SENT_HIGH +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). +* +* OUTPUT: +* After reading the MIB counter, the counter resets. +* +* RETURN: +* MIB counter value. +* +*******************************************************************************/ +unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, + unsigned int mib_offset) +{ + return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num) + + mib_offset)); +} + +/******************************************************************************* +* ethernet_phy_set - Set the ethernet port PHY address. +* +* DESCRIPTION: +* This routine set the ethernet port PHY address according to given +* parameter. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* Set PHY Address Register with given PHY address parameter. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) +{ + unsigned int reg_data; + + reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); + + reg_data &= ~(0x1F << (5 * eth_port_num)); + reg_data |= (phy_addr << (5 * eth_port_num)); + + MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data); + + return; +} + +/******************************************************************************* + * ethernet_phy_get - Get the ethernet port PHY address. + * + * DESCRIPTION: + * This routine returns the given ethernet port PHY address. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * None. + * + * RETURN: + * PHY address. + * + *******************************************************************************/ +static int ethernet_phy_get (ETH_PORT eth_port_num) +{ + unsigned int reg_data; + + reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); + + return ((reg_data >> (5 * eth_port_num)) & 0x1f); +} + +/***********************************************************/ +/* (Re)start autonegotiation */ +/***********************************************************/ +int phy_setup_aneg (char *devname, unsigned char addr) +{ + unsigned short ctl, adv; + + /* Setup standard advertise */ + miiphy_read (devname, addr, PHY_ANAR, &adv); + adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 | + PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | + PHY_ANLPAR_10); + miiphy_write (devname, addr, PHY_ANAR, adv); + + miiphy_read (devname, addr, PHY_1000BTCR, &adv); + adv |= (0x0300); + miiphy_write (devname, addr, PHY_1000BTCR, adv); + + /* Start/Restart aneg */ + miiphy_read (devname, addr, PHY_BMCR, &ctl); + ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + miiphy_write (devname, addr, PHY_BMCR, ctl); + + return 0; +} + +/******************************************************************************* + * ethernet_phy_reset - Reset Ethernet port PHY. + * + * DESCRIPTION: + * This routine utilize the SMI interface to reset the ethernet port PHY. + * The routine waits until the link is up again or link up is timeout. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * The ethernet port PHY renew its link. + * + * RETURN: + * None. + * + *******************************************************************************/ +static bool ethernet_phy_reset (ETH_PORT eth_port_num) +{ + unsigned int time_out = 50; + unsigned int phy_reg_data; + + eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data); + phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ + eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data); + + /* Reset the PHY */ + eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data); + phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ + eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data); + + /* Poll on the PHY LINK */ + do { + eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); + + if (time_out-- == 0) + return false; + } + while (!(phy_reg_data & 0x20)); + + return true; +} + +/******************************************************************************* + * eth_port_reset - Reset Ethernet port + * + * DESCRIPTION: + * This routine resets the chip by aborting any SDMA engine activity and + * clearing the MIB counters. The Receiver and the Transmit unit are in + * idle state after this command is performed and the port is disabled. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * Channel activity is halted. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_port_reset (ETH_PORT eth_port_num) +{ + unsigned int reg_data; + + /* Stop Tx port activity. Check port Tx activity. */ + reg_data = + MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num)); + + if (reg_data & 0xFF) { + /* Issue stop command for active channels only */ + MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num), (reg_data << 8)); + + /* Wait for all Tx activity to terminate. */ + do { + /* Check port cause register that all Tx queues are stopped */ + reg_data = + MV_REG_READ + (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num)); + } + while (reg_data & 0xFF); + } + + /* Stop Rx port activity. Check port Rx activity. */ + reg_data = + MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num)); + + if (reg_data & 0xFF) { + /* Issue stop command for active channels only */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num), (reg_data << 8)); + + /* Wait for all Rx activity to terminate. */ + do { + /* Check port cause register that all Rx queues are stopped */ + reg_data = + MV_REG_READ + (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num)); + } + while (reg_data & 0xFF); + } + + /* Clear all MIB counters */ + eth_clear_mib_counters (eth_port_num); + + /* Reset the Enable bit in the Configuration Register */ + reg_data = + MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG + (eth_port_num)); + reg_data &= ~ETH_SERIAL_PORT_ENABLE; + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + reg_data); + + return; +} + +#if 0 /* Not needed here */ +/******************************************************************************* + * ethernet_set_config_reg - Set specified bits in configuration register. + * + * DESCRIPTION: + * This function sets specified bits in the given ethernet + * configuration register. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. + * + * OUTPUT: + * The set bits in the value parameter are set in the configuration + * register. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void ethernet_set_config_reg (ETH_PORT eth_port_num, + unsigned int value) +{ + unsigned int eth_config_reg; + + eth_config_reg = + MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num)); + eth_config_reg |= value; + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), + eth_config_reg); + + return; +} +#endif + +#if 0 /* FIXME */ +/******************************************************************************* + * ethernet_reset_config_reg - Reset specified bits in configuration register. + * + * DESCRIPTION: + * This function resets specified bits in the given Ethernet + * configuration register. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. + * + * OUTPUT: + * The set bits in the value parameter are reset in the configuration + * register. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void ethernet_reset_config_reg (ETH_PORT eth_port_num, + unsigned int value) +{ + unsigned int eth_config_reg; + + eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG + (eth_port_num)); + eth_config_reg &= ~value; + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), + eth_config_reg); + + return; +} +#endif + +#if 0 /* Not needed here */ +/******************************************************************************* + * ethernet_get_config_reg - Get the port configuration register + * + * DESCRIPTION: + * This function returns the configuration register value of the given + * ethernet port. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * None. + * + * RETURN: + * Port configuration register value. + * + *******************************************************************************/ +static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) +{ + unsigned int eth_config_reg; + + eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG + (eth_port_num)); + return eth_config_reg; +} + +#endif + +/******************************************************************************* + * eth_port_read_smi_reg - Read PHY registers + * + * DESCRIPTION: + * This routine utilize the SMI interface to interact with the PHY in + * order to perform PHY register read. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int *value Register value buffer. + * + * OUTPUT: + * Write the value of a specified PHY register into given buffer. + * + * RETURN: + * false if the PHY is busy or read data is not in valid state. + * true otherwise. + * + *******************************************************************************/ +static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, + unsigned int phy_reg, unsigned int *value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + int phy_addr; + + phy_addr = ethernet_phy_get (eth_port_num); + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_READ); + + time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ + + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + + /* Wait for the data to update in the SMI register */ +#define PHY_UPDATE_TIMEOUT 10000 + for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); + + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + + *value = reg_value & 0xffff; + + return true; +} + +int mv_miiphy_read(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short *value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_READ); + + time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ + + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + + /* Wait for the data to update in the SMI register */ + for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); + + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + + *value = reg_value & 0xffff; + + return 0; +} + +/******************************************************************************* + * eth_port_write_smi_reg - Write to PHY registers + * + * DESCRIPTION: + * This routine utilize the SMI interface to interact with the PHY in + * order to perform writes to PHY registers. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int value Register value. + * + * OUTPUT: + * Write the given value to the specified PHY register. + * + * RETURN: + * false if the PHY is busy. + * true otherwise. + * + *******************************************************************************/ +static bool eth_port_write_smi_reg (ETH_PORT eth_port_num, + unsigned int phy_reg, unsigned int value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + int phy_addr; + + phy_addr = ethernet_phy_get (eth_port_num); + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_WRITE | (value & 0xffff)); + return true; +} + +int mv_miiphy_write(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_WRITE | (value & 0xffff)); + return 0; +} + +/******************************************************************************* + * eth_set_access_control - Config address decode parameters for Ethernet unit + * + * DESCRIPTION: + * This function configures the address decode parameters for the Gigabit + * Ethernet Controller according the given parameters struct. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_WIN_PARAM *param Address decode parameter struct. + * + * OUTPUT: + * An access window is opened using the given access parameters. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_set_access_control (ETH_PORT eth_port_num, + ETH_WIN_PARAM * param) +{ + unsigned int access_prot_reg; + + /* Set access control register */ + access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG + (eth_port_num)); + access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */ + access_prot_reg |= (param->access_ctrl << (param->win * 2)); + MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num), + access_prot_reg); + + /* Set window Size reg (SR) */ + MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 + + (ETH_SIZE_REG_GAP * param->win)), + (((param->size / 0x10000) - 1) << 16)); + + /* Set window Base address reg (BA) */ + MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)), + (param->target | param->attributes | param->base_addr)); + /* High address remap reg (HARR) */ + if (param->win < 4) + MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 + + (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)), + param->high_addr); + + /* Base address enable reg (BARER) */ + if (param->enable == 1) + MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, + (1 << param->win)); + else + MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, + (1 << param->win)); +} + +/******************************************************************************* + * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. + * + * DESCRIPTION: + * This function prepares a Rx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * int rx_desc_num Number of Rx descriptors + * int rx_buff_size Size of Rx buffer + * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. + * unsigned int rx_buff_base_addr Rx buffer memory area base addr. + * + * OUTPUT: + * The routine updates the Ethernet port control struct with information + * regarding the Rx descriptors and buffers. + * + * RETURN: + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. + * + *******************************************************************************/ +static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE rx_queue, + int rx_desc_num, + int rx_buff_size, + unsigned int rx_desc_base_addr, + unsigned int rx_buff_base_addr) +{ + ETH_RX_DESC *p_rx_desc; + ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */ + unsigned int buffer_addr; + int ix; /* a counter */ + + + p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr; + p_rx_prev_desc = p_rx_desc; + buffer_addr = rx_buff_base_addr; + + /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ + if (rx_buff_base_addr & 0xF) + return false; + + /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */ + if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE)) + return false; + + /* Rx buffers must be 64-bit aligned. */ + if ((rx_buff_base_addr + rx_buff_size) & 0x7) + return false; + + /* initialize the Rx descriptors ring */ + for (ix = 0; ix < rx_desc_num; ix++) { + p_rx_desc->buf_size = rx_buff_size; + p_rx_desc->byte_cnt = 0x0000; + p_rx_desc->cmd_sts = + ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; + p_rx_desc->next_desc_ptr = + ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE; + p_rx_desc->buf_ptr = buffer_addr; + p_rx_desc->return_info = 0x00000000; + D_CACHE_FLUSH_LINE (p_rx_desc, 0); + buffer_addr += rx_buff_size; + p_rx_prev_desc = p_rx_desc; + p_rx_desc = (ETH_RX_DESC *) + ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE); + } + + /* Closing Rx descriptors ring */ + p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr); + D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0); + + /* Save Rx desc pointer to driver struct. */ + CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); + USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); + + p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] = + (ETH_RX_DESC *) rx_desc_base_addr; + p_eth_port_ctrl->rx_desc_area_size[rx_queue] = + rx_desc_num * RX_DESC_ALIGNED_SIZE; + + p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue); + + return true; +} + +/******************************************************************************* + * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory. + * + * DESCRIPTION: + * This function prepares a Tx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * int tx_desc_num Number of Tx descriptors + * int tx_buff_size Size of Tx buffer + * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. + * unsigned int tx_buff_base_addr Tx buffer memory area base addr. + * + * OUTPUT: + * The routine updates the Ethernet port control struct with information + * regarding the Tx descriptors and buffers. + * + * RETURN: + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. + * + *******************************************************************************/ +static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE tx_queue, + int tx_desc_num, + int tx_buff_size, + unsigned int tx_desc_base_addr, + unsigned int tx_buff_base_addr) +{ + + ETH_TX_DESC *p_tx_desc; + ETH_TX_DESC *p_tx_prev_desc; + unsigned int buffer_addr; + int ix; /* a counter */ + + + /* save the first desc pointer to link with the last descriptor */ + p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr; + p_tx_prev_desc = p_tx_desc; + buffer_addr = tx_buff_base_addr; + + /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ + if (tx_buff_base_addr & 0xF) + return false; + + /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */ + if ((tx_buff_size > TX_BUFFER_MAX_SIZE) + || (tx_buff_size < TX_BUFFER_MIN_SIZE)) + return false; + + /* Initialize the Tx descriptors ring */ + for (ix = 0; ix < tx_desc_num; ix++) { + p_tx_desc->byte_cnt = 0x0000; + p_tx_desc->l4i_chk = 0x0000; + p_tx_desc->cmd_sts = 0x00000000; + p_tx_desc->next_desc_ptr = + ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE; + + p_tx_desc->buf_ptr = buffer_addr; + p_tx_desc->return_info = 0x00000000; + D_CACHE_FLUSH_LINE (p_tx_desc, 0); + buffer_addr += tx_buff_size; + p_tx_prev_desc = p_tx_desc; + p_tx_desc = (ETH_TX_DESC *) + ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE); + + } + /* Closing Tx descriptors ring */ + p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr; + D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0); + /* Set Tx desc pointer in driver struct. */ + CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); + USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); + + /* Init Tx ring base and size parameters */ + p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] = + (ETH_TX_DESC *) tx_desc_base_addr; + p_eth_port_ctrl->tx_desc_area_size[tx_queue] = + (tx_desc_num * TX_DESC_ALIGNED_SIZE); + + /* Add the queue to the list of Tx queues of this port */ + p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue); + + return true; +} + +/******************************************************************************* + * eth_port_send - Send an Ethernet packet + * + * DESCRIPTION: + * This routine send a given packet described by p_pktinfo parameter. It + * supports transmitting of a packet spaned over multiple buffers. The + * routine updates 'curr' and 'first' indexes according to the packet + * segment passed to the routine. In case the packet segment is first, + * the 'first' index is update. In any case, the 'curr' index is updated. + * If the routine get into Tx resource error it assigns 'curr' index as + * 'first'. This way the function can abort Tx process of multiple + * descriptors per packet. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Tx ring 'curr' and 'first' indexes are updated. + * + * RETURN: + * ETH_QUEUE_FULL in case of Tx resource error. + * ETH_ERROR in case the routine can not access Tx desc ring. + * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_TX_DESC *p_tx_desc_first; + volatile ETH_TX_DESC *p_tx_desc_curr; + volatile ETH_TX_DESC *p_tx_next_desc_curr; + volatile ETH_TX_DESC *p_tx_desc_used; + unsigned int command_status; + + /* Do not process Tx ring in case of Tx ring resource error */ + if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) + return ETH_QUEUE_FULL; + + /* Get the Tx Desc ring indexes */ + CURR_TFD_GET (p_tx_desc_curr, tx_queue); + USED_TFD_GET (p_tx_desc_used, tx_queue); + + if (p_tx_desc_curr == NULL) + return ETH_ERROR; + + /* The following parameters are used to save readings from memory */ + p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue); + command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC; + + if (command_status & (ETH_TX_FIRST_DESC)) { + /* Update first desc */ + FIRST_TFD_SET (p_tx_desc_curr, tx_queue); + p_tx_desc_first = p_tx_desc_curr; + } else { + FIRST_TFD_GET (p_tx_desc_first, tx_queue); + command_status |= ETH_BUFFER_OWNED_BY_DMA; + } + + /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */ + /* boundary. We use the memory allocated for Tx descriptor. This memory */ + /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */ + if (p_pkt_info->byte_cnt <= 8) { + printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */ + return ETH_ERROR; + + p_tx_desc_curr->buf_ptr = + (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC; + eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr, + p_pkt_info->byte_cnt); + } else + p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr; + + p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt; + p_tx_desc_curr->return_info = p_pkt_info->return_info; + + if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) { + /* Set last desc with DMA ownership and interrupt enable. */ + p_tx_desc_curr->cmd_sts = command_status | + ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT; + + if (p_tx_desc_curr != p_tx_desc_first) + p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA; + + /* Flush CPU pipe */ + + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0); + CPU_PIPE_FLUSH; + + /* Apply send command */ + ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num); + + /* Finish Tx packet. Update first desc in case of Tx resource error */ + p_tx_desc_first = p_tx_next_desc_curr; + FIRST_TFD_SET (p_tx_desc_first, tx_queue); + + } else { + p_tx_desc_curr->cmd_sts = command_status; + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); + } + + /* Check for ring index overlap in the Tx desc ring */ + if (p_tx_next_desc_curr == p_tx_desc_used) { + /* Update the current descriptor */ + CURR_TFD_SET (p_tx_desc_first, tx_queue); + + p_eth_port_ctrl->tx_resource_err[tx_queue] = true; + return ETH_QUEUE_LAST_RESOURCE; + } else { + /* Update the current descriptor */ + CURR_TFD_SET (p_tx_next_desc_curr, tx_queue); + return ETH_OK; + } +} + +/******************************************************************************* + * eth_tx_return_desc - Free all used Tx descriptors + * + * DESCRIPTION: + * This routine returns the transmitted packet information to the caller. + * It uses the 'first' index to support Tx desc return in case a transmit + * of a packet spanned over multiple buffer still in process. + * In case the Tx queue was in "resource error" condition, where there are + * no available Tx resources, the function resets the resource error flag. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Tx ring 'first' and 'used' indexes are updated. + * + * RETURN: + * ETH_ERROR in case the routine can not access Tx desc ring. + * ETH_RETRY in case there is transmission in process. + * ETH_END_OF_JOB if the routine has nothing to release. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * + p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_TX_DESC *p_tx_desc_used = NULL; + volatile ETH_TX_DESC *p_tx_desc_first = NULL; + unsigned int command_status; + + + /* Get the Tx Desc ring indexes */ + USED_TFD_GET (p_tx_desc_used, tx_queue); + FIRST_TFD_GET (p_tx_desc_first, tx_queue); + + + /* Sanity check */ + if (p_tx_desc_used == NULL) + return ETH_ERROR; + + command_status = p_tx_desc_used->cmd_sts; + + /* Still transmitting... */ + if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + return ETH_RETRY; + } + + /* Stop release. About to overlap the current available Tx descriptor */ + if ((p_tx_desc_used == p_tx_desc_first) && + (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) { + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + return ETH_END_OF_JOB; + } + + /* Pass the packet information to the caller */ + p_pkt_info->cmd_sts = command_status; + p_pkt_info->return_info = p_tx_desc_used->return_info; + p_tx_desc_used->return_info = 0; + + /* Update the next descriptor to release. */ + USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue); + + /* Any Tx return cancels the Tx resource error status */ + if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) + p_eth_port_ctrl->tx_resource_err[tx_queue] = false; + + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + + return ETH_OK; + +} + +/******************************************************************************* + * eth_port_receive - Get received information from Rx ring. + * + * DESCRIPTION: + * This routine returns the received data to the caller. There is no + * data copying during routine operation. All information is returned + * using pointer to packet information struct passed from the caller. + * If the routine exhausts Rx ring resources then the resource error flag + * is set. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Rx ring current and used indexes are updated. + * + * RETURN: + * ETH_ERROR in case the routine can not access Rx desc ring. + * ETH_QUEUE_FULL if Rx ring resources are exhausted. + * ETH_END_OF_JOB if there is no received data. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_RX_DESC *p_rx_curr_desc; + volatile ETH_RX_DESC *p_rx_next_curr_desc; + volatile ETH_RX_DESC *p_rx_used_desc; + unsigned int command_status; + + /* Do not process Rx ring in case of Rx ring resource error */ + if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) { + printf ("\nRx Queue is full ...\n"); + return ETH_QUEUE_FULL; + } + + /* Get the Rx Desc ring 'curr and 'used' indexes */ + CURR_RFD_GET (p_rx_curr_desc, rx_queue); + USED_RFD_GET (p_rx_used_desc, rx_queue); + + /* Sanity check */ + if (p_rx_curr_desc == NULL) + return ETH_ERROR; + + /* The following parameters are used to save readings from memory */ + p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue); + command_status = p_rx_curr_desc->cmd_sts; + + /* Nothing to receive... */ + if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { +/* DP(printf("Rx: command_status: %08x\n", command_status)); */ + D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); +/* DP(printf("\nETH_END_OF_JOB ...\n"));*/ + return ETH_END_OF_JOB; + } + + p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET; + p_pkt_info->cmd_sts = command_status; + p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET; + p_pkt_info->return_info = p_rx_curr_desc->return_info; + p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ + + /* Clean the return info field to indicate that the packet has been */ + /* moved to the upper layers */ + p_rx_curr_desc->return_info = 0; + + /* Update 'curr' in data structure */ + CURR_RFD_SET (p_rx_next_curr_desc, rx_queue); + + /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */ + if (p_rx_next_curr_desc == p_rx_used_desc) + p_eth_port_ctrl->rx_resource_err[rx_queue] = true; + + D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); + CPU_PIPE_FLUSH; + + return ETH_OK; +} + +/******************************************************************************* + * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring. + * + * DESCRIPTION: + * This routine returns a Rx buffer back to the Rx ring. It retrieves the + * next 'used' descriptor and attached the returned buffer to it. + * In case the Rx ring was in "resource error" condition, where there are + * no available Rx resources, the function resets the resource error flag. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info Information on the returned buffer. + * + * OUTPUT: + * New available Rx resource in Rx descriptor ring. + * + * RETURN: + * ETH_ERROR in case the routine can not access Rx desc ring. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * + p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */ + + /* Get 'used' Rx descriptor */ + USED_RFD_GET (p_used_rx_desc, rx_queue); + + /* Sanity check */ + if (p_used_rx_desc == NULL) + return ETH_ERROR; + + p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr; + p_used_rx_desc->return_info = p_pkt_info->return_info; + p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt; + p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */ + + /* Flush the write pipe */ + CPU_PIPE_FLUSH; + + /* Return the descriptor to DMA ownership */ + p_used_rx_desc->cmd_sts = + ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; + + /* Flush descriptor and CPU pipe */ + D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0); + CPU_PIPE_FLUSH; + + /* Move the used descriptor pointer to the next descriptor */ + USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue); + + /* Any Rx return cancels the Rx resource error status */ + if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) + p_eth_port_ctrl->rx_resource_err[rx_queue] = false; + + return ETH_OK; +} + +/******************************************************************************* + * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path + * + * DESCRIPTION: + * This routine sets the RX coalescing interrupt mechanism parameter. + * This parameter is a timeout counter, that counts in 64 t_clk + * chunks ; that when timeout event occurs a maskable interrupt + * occurs. + * The parameter is calculated using the tClk of the MV-643xx chip + * , and the required delay of the interrupt in usec. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in usec + * + * OUTPUT: + * Interrupt coalescing mechanism value is set in MV-643xx chip. + * + * RETURN: + * The interrupt coalescing value set in the gigE port. + * + *******************************************************************************/ +#if 0 /* FIXME */ +static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num, + unsigned int t_clk, + unsigned int delay) +{ + unsigned int coal; + + coal = ((t_clk / 1000000) * delay) / 64; + /* Set RX Coalescing mechanism */ + MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), + ((coal & 0x3fff) << 8) | + (MV_REG_READ + (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num)) + & 0xffc000ff)); + return coal; +} + +#endif +/******************************************************************************* + * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path + * + * DESCRIPTION: + * This routine sets the TX coalescing interrupt mechanism parameter. + * This parameter is a timeout counter, that counts in 64 t_clk + * chunks ; that when timeout event occurs a maskable interrupt + * occurs. + * The parameter is calculated using the t_cLK frequency of the + * MV-643xx chip and the required delay in the interrupt in uSec + * + * INPUT: + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in uSeconds + * + * OUTPUT: + * Interrupt coalescing mechanism value is set in MV-643xx chip. + * + * RETURN: + * The interrupt coalescing value set in the gigE port. + * + *******************************************************************************/ +#if 0 /* FIXME */ +static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num, + unsigned int t_clk, + unsigned int delay) +{ + unsigned int coal; + + coal = ((t_clk / 1000000) * delay) / 64; + /* Set TX Coalescing mechanism */ + MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num), + coal << 4); + return coal; +} +#endif + +/******************************************************************************* + * eth_b_copy - Copy bytes from source to destination + * + * DESCRIPTION: + * This function supports the eight bytes limitation on Tx buffer size. + * The routine will zero eight bytes starting from the destination address + * followed by copying bytes from the source address to the destination. + * + * INPUT: + * unsigned int src_addr 32 bit source address. + * unsigned int dst_addr 32 bit destination address. + * int byte_count Number of bytes to copy. + * + * OUTPUT: + * See description. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, + int byte_count) +{ + /* Zero the dst_addr area */ + *(unsigned int *) dst_addr = 0x0; + + while (byte_count != 0) { + *(char *) dst_addr = *(char *) src_addr; + dst_addr++; + src_addr++; + byte_count--; + } +} diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h new file mode 100644 index 0000000000..334b049ec5 --- /dev/null +++ b/board/prodrive/p3mx/mv_eth.h @@ -0,0 +1,840 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus + * + * based on - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * mv_eth.h - header file for the polled mode GT ethernet driver + */ + +#ifndef __DB64460_ETH_H__ +#define __DB64460_ETH_H__ + +#include +#include +#include +#include +#include +#include "mv_regs.h" +#include "ppc_error_no.h" +#include "../../Marvell/include/core.h" + +/************************************************************************* +************************************************************************** +************************************************************************** +* The first part is the high level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ +#ifndef MAX_SKB_FRAGS +#define MAX_SKB_FRAGS 0 +#endif + +/* Port attributes */ +/*#define MAX_RX_QUEUE_NUM 8*/ +/*#define MAX_TX_QUEUE_NUM 8*/ +#define MAX_RX_QUEUE_NUM 1 +#define MAX_TX_QUEUE_NUM 1 + + +/* Use one TX queue and one RX queue */ +#define MV64460_TX_QUEUE_NUM 1 +#define MV64460_RX_QUEUE_NUM 1 + +/* + * Number of RX / TX descriptors on RX / TX rings. + * Note that allocating RX descriptors is done by allocating the RX + * ring AND a preallocated RX buffers (skb's) for each descriptor. + * The TX descriptors only allocates the TX descriptors ring, + * with no pre allocated TX buffers (skb's are allocated by higher layers. + */ + +/* Default TX ring size is 10 descriptors */ +#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE +#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE +#else +#define MV64460_TX_QUEUE_SIZE 4 +#endif + +/* Default RX ring size is 4 descriptors */ +#ifdef CONFIG_MV64460_ETH_RXQUEUE_SIZE +#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE +#else +#define MV64460_RX_QUEUE_SIZE 4 +#endif + +#ifdef CONFIG_RX_BUFFER_SIZE +#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE +#else +#define MV64460_RX_BUFFER_SIZE 1600 +#endif + +#ifdef CONFIG_TX_BUFFER_SIZE +#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE +#else +#define MV64460_TX_BUFFER_SIZE 1600 +#endif + +/* + * Network device statistics. Akin to the 2.0 ether stats but + * with byte counters. + */ + +struct net_device_stats +{ + unsigned long rx_packets; /* total packets received */ + unsigned long tx_packets; /* total packets transmitted */ + unsigned long rx_bytes; /* total bytes received */ + unsigned long tx_bytes; /* total bytes transmitted */ + unsigned long rx_errors; /* bad packets received */ + unsigned long tx_errors; /* packet transmit problems */ + unsigned long rx_dropped; /* no space in linux buffers */ + unsigned long tx_dropped; /* no space available in linux */ + unsigned long multicast; /* multicast packets received */ + unsigned long collisions; + + /* detailed rx_errors: */ + unsigned long rx_length_errors; + unsigned long rx_over_errors; /* receiver ring buff overflow */ + unsigned long rx_crc_errors; /* recved pkt with crc error */ + unsigned long rx_frame_errors; /* recv'd frame alignment error */ + unsigned long rx_fifo_errors; /* recv'r fifo overrun */ + unsigned long rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ + unsigned long tx_aborted_errors; + unsigned long tx_carrier_errors; + unsigned long tx_fifo_errors; + unsigned long tx_heartbeat_errors; + unsigned long tx_window_errors; + + /* for cslip etc */ + unsigned long rx_compressed; + unsigned long tx_compressed; +}; + + +/* Private data structure used for ethernet device */ +struct mv64460_eth_priv { + unsigned int port_num; + struct net_device_stats *stats; + + /* to buffer area aligned */ + char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1]; /*pointers to alligned tx buffs in memory space */ + char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1]; /*pointers to allinged rx buffs in memory space */ + + /* Size of Tx Ring per queue */ + unsigned int tx_ring_size [MAX_TX_QUEUE_NUM]; + + /* Size of Rx Ring per queue */ + unsigned int rx_ring_size [MAX_RX_QUEUE_NUM]; + + /* Magic Number for Ethernet running */ + unsigned int eth_running; + + int first_init; +}; + +int mv64460_eth_init (struct eth_device *dev); +int mv64460_eth_stop (struct eth_device *dev); +int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length); +/* return db64460_eth0_poll(); */ + +int mv64460_eth_open (struct eth_device *dev); + + +/************************************************************************* +************************************************************************** +************************************************************************** +* The second part is the low level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ + + +/******************************************************************************** + * Header File for : MV-643xx network interface header + * + * DESCRIPTION: + * This header file contains macros typedefs and function declaration for + * the Marvell Gig Bit Ethernet Controller. + * + * DEPENDENCIES: + * None. + * + *******************************************************************************/ + + +#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY +#ifdef CONFIG_MV64460_SRAM_CACHEABLE +/* In case SRAM is cacheable but not cache coherent */ +#define D_CACHE_FLUSH_LINE(addr, offset) \ +{ \ + __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ +} +#else +/* In case SRAM is cache coherent or non-cacheable */ +#define D_CACHE_FLUSH_LINE(addr, offset) ; +#endif +#else +#ifdef CONFIG_NOT_COHERENT_CACHE +/* In case of descriptors on DDR but not cache coherent */ +#define D_CACHE_FLUSH_LINE(addr, offset) \ +{ \ + __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ +} +#else +/* In case of descriptors on DDR and cache coherent */ +#define D_CACHE_FLUSH_LINE(addr, offset) ; +#endif /* CONFIG_NOT_COHERENT_CACHE */ +#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */ + + +#define CPU_PIPE_FLUSH \ +{ \ + __asm__ __volatile__ ("eieio"); \ +} + + +/* defines */ + +/* Default port configuration value */ +#define PORT_CONFIG_VALUE \ + ETH_UNICAST_NORMAL_MODE | \ + ETH_DEFAULT_RX_QUEUE_0 | \ + ETH_DEFAULT_RX_ARP_QUEUE_0 | \ + ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \ + ETH_RECEIVE_BC_IF_IP | \ + ETH_RECEIVE_BC_IF_ARP | \ + ETH_CAPTURE_TCP_FRAMES_DIS | \ + ETH_CAPTURE_UDP_FRAMES_DIS | \ + ETH_DEFAULT_RX_TCP_QUEUE_0 | \ + ETH_DEFAULT_RX_UDP_QUEUE_0 | \ + ETH_DEFAULT_RX_BPDU_QUEUE_0 + +/* Default port extend configuration value */ +#define PORT_CONFIG_EXTEND_VALUE \ + ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \ + ETH_PARTITION_DISABLE + + +/* Default sdma control value */ +#ifdef CONFIG_NOT_COHERENT_CACHE +#define PORT_SDMA_CONFIG_VALUE \ + ETH_RX_BURST_SIZE_16_64BIT | \ + GT_ETH_IPG_INT_RX(0) | \ + ETH_TX_BURST_SIZE_16_64BIT; +#else +#define PORT_SDMA_CONFIG_VALUE \ + ETH_RX_BURST_SIZE_4_64BIT | \ + GT_ETH_IPG_INT_RX(0) | \ + ETH_TX_BURST_SIZE_4_64BIT; +#endif + +#define GT_ETH_IPG_INT_RX(value) \ + ((value & 0x3fff) << 8) + +/* Default port serial control value */ +#define PORT_SERIAL_CONTROL_VALUE \ + ETH_FORCE_LINK_PASS | \ + ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \ + ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \ + ETH_ADV_SYMMETRIC_FLOW_CTRL | \ + ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + ETH_FORCE_BP_MODE_NO_JAM | \ + BIT9 | \ + ETH_DO_NOT_FORCE_LINK_FAIL | \ + ETH_RETRANSMIT_16_ETTEMPTS | \ + ETH_ENABLE_AUTO_NEG_SPEED_GMII | \ + ETH_DTE_ADV_0 | \ + ETH_DISABLE_AUTO_NEG_BYPASS | \ + ETH_AUTO_NEG_NO_CHANGE | \ + ETH_MAX_RX_PACKET_1552BYTE | \ + ETH_CLR_EXT_LOOPBACK | \ + ETH_SET_FULL_DUPLEX_MODE | \ + ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX; + +#define RX_BUFFER_MAX_SIZE 0xFFFF +#define TX_BUFFER_MAX_SIZE 0xFFFF /* Buffer are limited to 64k */ + +#define RX_BUFFER_MIN_SIZE 0x8 +#define TX_BUFFER_MIN_SIZE 0x8 + +/* Tx WRR confoguration macros */ +#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ +#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_fFFF /* PMTBS register (default) */ +#define PORT_TOKEN_RATE 1023 /* PTTBRC register (default) */ + +/* MAC accepet/reject macros */ +#define ACCEPT_MAC_ADDR 0 +#define REJECT_MAC_ADDR 1 + +/* Size of a Tx/Rx descriptor used in chain list data structure */ +#define RX_DESC_ALIGNED_SIZE 0x20 +#define TX_DESC_ALIGNED_SIZE 0x20 + +/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ +#define TX_BUF_OFFSET_IN_DESC 0x18 +/* Buffer offset from buffer pointer */ +#define RX_BUF_OFFSET 0x2 + +/* Gap define */ +#define ETH_BAR_GAP 0x8 +#define ETH_SIZE_REG_GAP 0x8 +#define ETH_HIGH_ADDR_REMAP_REG_GAP 0x4 +#define ETH_PORT_ACCESS_CTRL_GAP 0x4 + +/* Gigabit Ethernet Unit Global Registers */ + +/* MIB Counters register definitions */ +#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0 +#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4 +#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8 +#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc +#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10 +#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14 +#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18 +#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c +#define ETH_MIB_FRAMES_64_OCTETS 0x20 +#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24 +#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28 +#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c +#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30 +#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34 +#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38 +#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c +#define ETH_MIB_GOOD_FRAMES_SENT 0x40 +#define ETH_MIB_EXCESSIVE_COLLISION 0x44 +#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48 +#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c +#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50 +#define ETH_MIB_FC_SENT 0x54 +#define ETH_MIB_GOOD_FC_RECEIVED 0x58 +#define ETH_MIB_BAD_FC_RECEIVED 0x5c +#define ETH_MIB_UNDERSIZE_RECEIVED 0x60 +#define ETH_MIB_FRAGMENTS_RECEIVED 0x64 +#define ETH_MIB_OVERSIZE_RECEIVED 0x68 +#define ETH_MIB_JABBER_RECEIVED 0x6c +#define ETH_MIB_MAC_RECEIVE_ERROR 0x70 +#define ETH_MIB_BAD_CRC_EVENT 0x74 +#define ETH_MIB_COLLISION 0x78 +#define ETH_MIB_LATE_COLLISION 0x7c + +/* Port serial status reg (PSR) */ +#define ETH_INTERFACE_GMII_MII 0 +#define ETH_INTERFACE_PCM BIT0 +#define ETH_LINK_IS_DOWN 0 +#define ETH_LINK_IS_UP BIT1 +#define ETH_PORT_AT_HALF_DUPLEX 0 +#define ETH_PORT_AT_FULL_DUPLEX BIT2 +#define ETH_RX_FLOW_CTRL_DISABLED 0 +#define ETH_RX_FLOW_CTRL_ENBALED BIT3 +#define ETH_GMII_SPEED_100_10 0 +#define ETH_GMII_SPEED_1000 BIT4 +#define ETH_MII_SPEED_10 0 +#define ETH_MII_SPEED_100 BIT5 +#define ETH_NO_TX 0 +#define ETH_TX_IN_PROGRESS BIT7 +#define ETH_BYPASS_NO_ACTIVE 0 +#define ETH_BYPASS_ACTIVE BIT8 +#define ETH_PORT_NOT_AT_PARTITION_STATE 0 +#define ETH_PORT_AT_PARTITION_STATE BIT9 +#define ETH_PORT_TX_FIFO_NOT_EMPTY 0 +#define ETH_PORT_TX_FIFO_EMPTY BIT10 + + +/* These macros describes the Port configuration reg (Px_cR) bits */ +#define ETH_UNICAST_NORMAL_MODE 0 +#define ETH_UNICAST_PROMISCUOUS_MODE BIT0 +#define ETH_DEFAULT_RX_QUEUE_0 0 +#define ETH_DEFAULT_RX_QUEUE_1 BIT1 +#define ETH_DEFAULT_RX_QUEUE_2 BIT2 +#define ETH_DEFAULT_RX_QUEUE_3 (BIT2 | BIT1) +#define ETH_DEFAULT_RX_QUEUE_4 BIT3 +#define ETH_DEFAULT_RX_QUEUE_5 (BIT3 | BIT1) +#define ETH_DEFAULT_RX_QUEUE_6 (BIT3 | BIT2) +#define ETH_DEFAULT_RX_QUEUE_7 (BIT3 | BIT2 | BIT1) +#define ETH_DEFAULT_RX_ARP_QUEUE_0 0 +#define ETH_DEFAULT_RX_ARP_QUEUE_1 BIT4 +#define ETH_DEFAULT_RX_ARP_QUEUE_2 BIT5 +#define ETH_DEFAULT_RX_ARP_QUEUE_3 (BIT5 | BIT4) +#define ETH_DEFAULT_RX_ARP_QUEUE_4 BIT6 +#define ETH_DEFAULT_RX_ARP_QUEUE_5 (BIT6 | BIT4) +#define ETH_DEFAULT_RX_ARP_QUEUE_6 (BIT6 | BIT5) +#define ETH_DEFAULT_RX_ARP_QUEUE_7 (BIT6 | BIT5 | BIT4) +#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP 0 +#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP BIT7 +#define ETH_RECEIVE_BC_IF_IP 0 +#define ETH_REJECT_BC_IF_IP BIT8 +#define ETH_RECEIVE_BC_IF_ARP 0 +#define ETH_REJECT_BC_IF_ARP BIT9 +#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY BIT12 +#define ETH_CAPTURE_TCP_FRAMES_DIS 0 +#define ETH_CAPTURE_TCP_FRAMES_EN BIT14 +#define ETH_CAPTURE_UDP_FRAMES_DIS 0 +#define ETH_CAPTURE_UDP_FRAMES_EN BIT15 +#define ETH_DEFAULT_RX_TCP_QUEUE_0 0 +#define ETH_DEFAULT_RX_TCP_QUEUE_1 BIT16 +#define ETH_DEFAULT_RX_TCP_QUEUE_2 BIT17 +#define ETH_DEFAULT_RX_TCP_QUEUE_3 (BIT17 | BIT16) +#define ETH_DEFAULT_RX_TCP_QUEUE_4 BIT18 +#define ETH_DEFAULT_RX_TCP_QUEUE_5 (BIT18 | BIT16) +#define ETH_DEFAULT_RX_TCP_QUEUE_6 (BIT18 | BIT17) +#define ETH_DEFAULT_RX_TCP_QUEUE_7 (BIT18 | BIT17 | BIT16) +#define ETH_DEFAULT_RX_UDP_QUEUE_0 0 +#define ETH_DEFAULT_RX_UDP_QUEUE_1 BIT19 +#define ETH_DEFAULT_RX_UDP_QUEUE_2 BIT20 +#define ETH_DEFAULT_RX_UDP_QUEUE_3 (BIT20 | BIT19) +#define ETH_DEFAULT_RX_UDP_QUEUE_4 (BIT21 +#define ETH_DEFAULT_RX_UDP_QUEUE_5 (BIT21 | BIT19) +#define ETH_DEFAULT_RX_UDP_QUEUE_6 (BIT21 | BIT20) +#define ETH_DEFAULT_RX_UDP_QUEUE_7 (BIT21 | BIT20 | BIT19) +#define ETH_DEFAULT_RX_BPDU_QUEUE_0 0 +#define ETH_DEFAULT_RX_BPDU_QUEUE_1 BIT22 +#define ETH_DEFAULT_RX_BPDU_QUEUE_2 BIT23 +#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22) +#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24 +#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22) +#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23) +#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22) + + +/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ +#define ETH_CLASSIFY_EN BIT0 +#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL 0 +#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 BIT1 +#define ETH_PARTITION_DISABLE 0 +#define ETH_PARTITION_ENABLE BIT2 + + +/* Tx/Rx queue command reg (RQCR/TQCR)*/ +#define ETH_QUEUE_0_ENABLE BIT0 +#define ETH_QUEUE_1_ENABLE BIT1 +#define ETH_QUEUE_2_ENABLE BIT2 +#define ETH_QUEUE_3_ENABLE BIT3 +#define ETH_QUEUE_4_ENABLE BIT4 +#define ETH_QUEUE_5_ENABLE BIT5 +#define ETH_QUEUE_6_ENABLE BIT6 +#define ETH_QUEUE_7_ENABLE BIT7 +#define ETH_QUEUE_0_DISABLE BIT8 +#define ETH_QUEUE_1_DISABLE BIT9 +#define ETH_QUEUE_2_DISABLE BIT10 +#define ETH_QUEUE_3_DISABLE BIT11 +#define ETH_QUEUE_4_DISABLE BIT12 +#define ETH_QUEUE_5_DISABLE BIT13 +#define ETH_QUEUE_6_DISABLE BIT14 +#define ETH_QUEUE_7_DISABLE BIT15 + +/* These macros describes the Port Sdma configuration reg (SDCR) bits */ +#define ETH_RIFB BIT0 +#define ETH_RX_BURST_SIZE_1_64BIT 0 +#define ETH_RX_BURST_SIZE_2_64BIT BIT1 +#define ETH_RX_BURST_SIZE_4_64BIT BIT2 +#define ETH_RX_BURST_SIZE_8_64BIT (BIT2 | BIT1) +#define ETH_RX_BURST_SIZE_16_64BIT BIT3 +#define ETH_BLM_RX_NO_SWAP BIT4 +#define ETH_BLM_RX_BYTE_SWAP 0 +#define ETH_BLM_TX_NO_SWAP BIT5 +#define ETH_BLM_TX_BYTE_SWAP 0 +#define ETH_DESCRIPTORS_BYTE_SWAP BIT6 +#define ETH_DESCRIPTORS_NO_SWAP 0 +#define ETH_TX_BURST_SIZE_1_64BIT 0 +#define ETH_TX_BURST_SIZE_2_64BIT BIT22 +#define ETH_TX_BURST_SIZE_4_64BIT BIT23 +#define ETH_TX_BURST_SIZE_8_64BIT (BIT23 | BIT22) +#define ETH_TX_BURST_SIZE_16_64BIT BIT24 + +/* These macros describes the Port serial control reg (PSCR) bits */ +#define ETH_SERIAL_PORT_DISABLE 0 +#define ETH_SERIAL_PORT_ENABLE BIT0 +#define ETH_FORCE_LINK_PASS BIT1 +#define ETH_DO_NOT_FORCE_LINK_PASS 0 +#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX 0 +#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX BIT2 +#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL 0 +#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL BIT3 +#define ETH_ADV_NO_FLOW_CTRL 0 +#define ETH_ADV_SYMMETRIC_FLOW_CTRL BIT4 +#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 +#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS BIT5 +#define ETH_FORCE_BP_MODE_NO_JAM 0 +#define ETH_FORCE_BP_MODE_JAM_TX BIT7 +#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR BIT8 +#define ETH_FORCE_LINK_FAIL 0 +#define ETH_DO_NOT_FORCE_LINK_FAIL BIT10 +#define ETH_RETRANSMIT_16_ETTEMPTS 0 +#define ETH_RETRANSMIT_FOREVER BIT11 +#define ETH_DISABLE_AUTO_NEG_SPEED_GMII BIT13 +#define ETH_ENABLE_AUTO_NEG_SPEED_GMII 0 +#define ETH_DTE_ADV_0 0 +#define ETH_DTE_ADV_1 BIT14 +#define ETH_DISABLE_AUTO_NEG_BYPASS 0 +#define ETH_ENABLE_AUTO_NEG_BYPASS BIT15 +#define ETH_AUTO_NEG_NO_CHANGE 0 +#define ETH_RESTART_AUTO_NEG BIT16 +#define ETH_MAX_RX_PACKET_1518BYTE 0 +#define ETH_MAX_RX_PACKET_1522BYTE BIT17 +#define ETH_MAX_RX_PACKET_1552BYTE BIT18 +#define ETH_MAX_RX_PACKET_9022BYTE (BIT18 | BIT17) +#define ETH_MAX_RX_PACKET_9192BYTE BIT19 +#define ETH_MAX_RX_PACKET_9700BYTE (BIT19 | BIT17) +#define ETH_SET_EXT_LOOPBACK BIT20 +#define ETH_CLR_EXT_LOOPBACK 0 +#define ETH_SET_FULL_DUPLEX_MODE BIT21 +#define ETH_SET_HALF_DUPLEX_MODE 0 +#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX BIT22 +#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 +#define ETH_SET_GMII_SPEED_TO_10_100 0 +#define ETH_SET_GMII_SPEED_TO_1000 BIT23 +#define ETH_SET_MII_SPEED_TO_10 0 +#define ETH_SET_MII_SPEED_TO_100 BIT24 + + +/* SMI reg */ +#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */ +#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */ +#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */ +#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */ + +/* SDMA command status fields macros */ + +/* Tx & Rx descriptors status */ +#define ETH_ERROR_SUMMARY (BIT0) + +/* Tx & Rx descriptors command */ +#define ETH_BUFFER_OWNED_BY_DMA (BIT31) + +/* Tx descriptors status */ +#define ETH_LC_ERROR (0 ) +#define ETH_UR_ERROR (BIT1 ) +#define ETH_RL_ERROR (BIT2 ) +#define ETH_LLC_SNAP_FORMAT (BIT9 ) + +/* Rx descriptors status */ +#define ETH_CRC_ERROR (0 ) +#define ETH_OVERRUN_ERROR (BIT1 ) +#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 ) +#define ETH_RESOURCE_ERROR ((BIT2 | BIT1)) +#define ETH_VLAN_TAGGED (BIT19) +#define ETH_BPDU_FRAME (BIT20) +#define ETH_TCP_FRAME_OVER_IP_V_4 (0 ) +#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21) +#define ETH_OTHER_FRAME_TYPE (BIT22) +#define ETH_LAYER_2_IS_ETH_V_2 (BIT23) +#define ETH_FRAME_TYPE_IP_V_4 (BIT24) +#define ETH_FRAME_HEADER_OK (BIT25) +#define ETH_RX_LAST_DESC (BIT26) +#define ETH_RX_FIRST_DESC (BIT27) +#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28) +#define ETH_RX_ENABLE_INTERRUPT (BIT29) +#define ETH_LAYER_4_CHECKSUM_OK (BIT30) + +/* Rx descriptors byte count */ +#define ETH_FRAME_FRAGMENTED (BIT2) + +/* Tx descriptors command */ +#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10) +#define ETH_FRAME_SET_TO_VLAN (BIT15) +#define ETH_TCP_FRAME (0 ) +#define ETH_UDP_FRAME (BIT16) +#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17) +#define ETH_GEN_IP_V_4_CHECKSUM (BIT18) +#define ETH_ZERO_PADDING (BIT19) +#define ETH_TX_LAST_DESC (BIT20) +#define ETH_TX_FIRST_DESC (BIT21) +#define ETH_GEN_CRC (BIT22) +#define ETH_TX_ENABLE_INTERRUPT (BIT23) +#define ETH_AUTO_MODE (BIT30) + +/* Address decode parameters */ +/* Ethernet Base Address Register bits */ +#define EBAR_TARGET_DRAM 0x00000000 +#define EBAR_TARGET_DEVICE 0x00000001 +#define EBAR_TARGET_CBS 0x00000002 +#define EBAR_TARGET_PCI0 0x00000003 +#define EBAR_TARGET_PCI1 0x00000004 +#define EBAR_TARGET_CUNIT 0x00000005 +#define EBAR_TARGET_AUNIT 0x00000006 +#define EBAR_TARGET_GUNIT 0x00000007 + +/* Window attributes */ +#define EBAR_ATTR_DRAM_CS0 0x00000E00 +#define EBAR_ATTR_DRAM_CS1 0x00000D00 +#define EBAR_ATTR_DRAM_CS2 0x00000B00 +#define EBAR_ATTR_DRAM_CS3 0x00000700 + +/* DRAM Target interface */ +#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY 0x00000000 +#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT 0x00001000 +#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB 0x00002000 + +/* Device Bus Target interface */ +#define EBAR_ATTR_DEVICE_DEVCS0 0x00001E00 +#define EBAR_ATTR_DEVICE_DEVCS1 0x00001D00 +#define EBAR_ATTR_DEVICE_DEVCS2 0x00001B00 +#define EBAR_ATTR_DEVICE_DEVCS3 0x00001700 +#define EBAR_ATTR_DEVICE_BOOTCS3 0x00000F00 + +/* PCI Target interface */ +#define EBAR_ATTR_PCI_BYTE_SWAP 0x00000000 +#define EBAR_ATTR_PCI_NO_SWAP 0x00000100 +#define EBAR_ATTR_PCI_BYTE_WORD_SWAP 0x00000200 +#define EBAR_ATTR_PCI_WORD_SWAP 0x00000300 +#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000 +#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT 0x00000400 +#define EBAR_ATTR_PCI_IO_SPACE 0x00000000 +#define EBAR_ATTR_PCI_MEMORY_SPACE 0x00000800 +#define EBAR_ATTR_PCI_REQ64_FORCE 0x00000000 +#define EBAR_ATTR_PCI_REQ64_SIZE 0x00001000 + +/* CPU 60x bus or internal SRAM interface */ +#define EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000 +#define EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100 +#define EBAR_ATTR_CBS_SRAM 0x00000000 +#define EBAR_ATTR_CBS_CPU_BUS 0x00000800 + +/* Window access control */ +#define EWIN_ACCESS_NOT_ALLOWED 0 +#define EWIN_ACCESS_READ_ONLY BIT0 +#define EWIN_ACCESS_FULL (BIT1 | BIT0) +#define EWIN0_ACCESS_MASK 0x0003 +#define EWIN1_ACCESS_MASK 0x000C +#define EWIN2_ACCESS_MASK 0x0030 +#define EWIN3_ACCESS_MASK 0x00C0 + +/* typedefs */ + +typedef enum _eth_port +{ + ETH_0 = 0, + ETH_1 = 1, + ETH_2 = 2 +}ETH_PORT; + +typedef enum _eth_func_ret_status +{ + ETH_OK, /* Returned as expected. */ + ETH_ERROR, /* Fundamental error. */ + ETH_RETRY, /* Could not process request. Try later. */ + ETH_END_OF_JOB, /* Ring has nothing to process. */ + ETH_QUEUE_FULL, /* Ring resource error. */ + ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */ +}ETH_FUNC_RET_STATUS; + +typedef enum _eth_queue +{ + ETH_Q0 = 0, + ETH_Q1 = 1, + ETH_Q2 = 2, + ETH_Q3 = 3, + ETH_Q4 = 4, + ETH_Q5 = 5, + ETH_Q6 = 6, + ETH_Q7 = 7 +} ETH_QUEUE; + +typedef enum _addr_win +{ + ETH_WIN0, + ETH_WIN1, + ETH_WIN2, + ETH_WIN3, + ETH_WIN4, + ETH_WIN5 +} ETH_ADDR_WIN; + +typedef enum _eth_target +{ + ETH_TARGET_DRAM , + ETH_TARGET_DEVICE, + ETH_TARGET_CBS , + ETH_TARGET_PCI0 , + ETH_TARGET_PCI1 +}ETH_TARGET; + +typedef struct _eth_rx_desc +{ + unsigned short byte_cnt ; /* Descriptor buffer byte count */ + unsigned short buf_size ; /* Buffer size */ + unsigned int cmd_sts ; /* Descriptor command status */ + unsigned int next_desc_ptr; /* Next descriptor pointer */ + unsigned int buf_ptr ; /* Descriptor buffer pointer */ + unsigned int return_info ; /* User resource return information */ +} ETH_RX_DESC; + + +typedef struct _eth_tx_desc +{ + unsigned short byte_cnt ; /* Descriptor buffer byte count */ + unsigned short l4i_chk ; /* CPU provided TCP Checksum */ + unsigned int cmd_sts ; /* Descriptor command status */ + unsigned int next_desc_ptr; /* Next descriptor pointer */ + unsigned int buf_ptr ; /* Descriptor buffer pointer */ + unsigned int return_info ; /* User resource return information */ +} ETH_TX_DESC; + +/* Unified struct for Rx and Tx operations. The user is not required to */ +/* be familier with neither Tx nor Rx descriptors. */ +typedef struct _pkt_info +{ + unsigned short byte_cnt ; /* Descriptor buffer byte count */ + unsigned short l4i_chk ; /* Tx CPU provided TCP Checksum */ + unsigned int cmd_sts ; /* Descriptor command status */ + unsigned int buf_ptr ; /* Descriptor buffer pointer */ + unsigned int return_info ; /* User resource return information */ +} PKT_INFO; + + +typedef struct _eth_win_param +{ + ETH_ADDR_WIN win; /* Window number. See ETH_ADDR_WIN enum */ + ETH_TARGET target; /* System targets. See ETH_TARGET enum */ + unsigned short attributes; /* BAR attributes. See above macros. */ + unsigned int base_addr; /* Window base address in unsigned int form */ + unsigned int high_addr; /* Window high address in unsigned int form */ + unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */ + bool enable; /* Enable/disable access to the window. */ + unsigned short access_ctrl; /* Access ctrl register. see above macros */ +} ETH_WIN_PARAM; + + +/* Ethernet port specific infomation */ + +typedef struct _eth_port_ctrl +{ + ETH_PORT port_num; /* User Ethernet port number */ + int port_phy_addr; /* User phy address of Ethrnet port */ + unsigned char port_mac_addr[6]; /* User defined port MAC address. */ + unsigned int port_config; /* User port configuration value */ + unsigned int port_config_extend; /* User port config extend value */ + unsigned int port_sdma_config; /* User port SDMA config value */ + unsigned int port_serial_control; /* User port serial control value */ + unsigned int port_tx_queue_command; /* Port active Tx queues summary */ + unsigned int port_rx_queue_command; /* Port active Rx queues summary */ + + /* User function to cast virtual address to CPU bus address */ + unsigned int (*port_virt_to_phys)(unsigned int addr); + /* User scratch pad for user specific data structures */ + void *port_private; + + bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */ + bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */ + + /* Tx/Rx rings managment indexes fields. For driver use */ + + /* Next available Rx resource */ + volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM]; + /* Returning Rx resource */ + volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM]; + + /* Next available Tx resource */ + volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM]; + /* Returning Tx resource */ + volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM]; + /* An extra Tx index to support transmit of multiple buffers per packet */ + volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM]; + + /* Tx/Rx rings size and base variables fields. For driver use */ + + volatile ETH_RX_DESC *p_rx_desc_area_base[MAX_RX_QUEUE_NUM]; + unsigned int rx_desc_area_size[MAX_RX_QUEUE_NUM]; + char *p_rx_buffer_base[MAX_RX_QUEUE_NUM]; + + volatile ETH_TX_DESC *p_tx_desc_area_base[MAX_TX_QUEUE_NUM]; + unsigned int tx_desc_area_size[MAX_TX_QUEUE_NUM]; + char *p_tx_buffer_base[MAX_TX_QUEUE_NUM]; + +} ETH_PORT_INFO; + + +/* ethernet.h API list */ + +/* Port operation control routines */ +static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl); +static void eth_port_reset(ETH_PORT eth_port_num); +static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl); + + +/* Port MAC address routines */ +static void eth_port_uc_addr_set (ETH_PORT eth_port_num, + unsigned char *p_addr, + ETH_QUEUE queue); +#if 0 /* FIXME */ +static void eth_port_mc_addr (ETH_PORT eth_port_num, + unsigned char *p_addr, + ETH_QUEUE queue, + int option); +#endif + +/* PHY and MIB routines */ +static bool ethernet_phy_reset(ETH_PORT eth_port_num); + +static bool eth_port_write_smi_reg(ETH_PORT eth_port_num, + unsigned int phy_reg, + unsigned int value); + +static bool eth_port_read_smi_reg(ETH_PORT eth_port_num, + unsigned int phy_reg, + unsigned int* value); + +static void eth_clear_mib_counters(ETH_PORT eth_port_num); + +/* Port data flow control routines */ +static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO *p_pkt_info); +static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO *p_pkt_info); +static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO *p_pkt_info); +static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO *p_pkt_info); + + +static bool ether_init_tx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE tx_queue, + int tx_desc_num, + int tx_buff_size, + unsigned int tx_desc_base_addr, + unsigned int tx_buff_base_addr); + +static bool ether_init_rx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, + ETH_QUEUE rx_queue, + int rx_desc_num, + int rx_buff_size, + unsigned int rx_desc_base_addr, + unsigned int rx_buff_base_addr); + +#endif /* MV64460_ETH_ */ diff --git a/board/prodrive/p3mx/mv_regs.h b/board/prodrive/p3mx/mv_regs.h new file mode 100644 index 0000000000..068590f9d3 --- /dev/null +++ b/board/prodrive/p3mx/mv_regs.h @@ -0,0 +1,1125 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus + * + * based on - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/******************************************************************************** +* gt64460r.h - GT-64460 Internal registers definition file. +* +* DESCRIPTION: +* None. +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +#ifndef __INCmv_regsh +#define __INCmv_regsh + +#define MV64460 + +/* Supported by the Atlantis */ +#define MV64460_INCLUDE_PCI_1 +#define MV64460_INCLUDE_PCI_0_ARBITER +#define MV64460_INCLUDE_PCI_1_ARBITER +#define MV64460_INCLUDE_SNOOP_SUPPORT +#define MV64460_INCLUDE_P2P +#define MV64460_INCLUDE_ETH_PORT_2 +#define MV64460_INCLUDE_CPU_MAPPING +#define MV64460_INCLUDE_MPSC + +/* Not supported features */ +#undef INCLUDE_CNTMR_4_7 +#undef INCLUDE_DMA_4_7 + +/****************************************/ +/* Processor Address Space */ +/****************************************/ + +/* DDR SDRAM BAR and size registers */ + +#define MV64460_CS_0_BASE_ADDR 0x008 +#define MV64460_CS_0_SIZE 0x010 +#define MV64460_CS_1_BASE_ADDR 0x208 +#define MV64460_CS_1_SIZE 0x210 +#define MV64460_CS_2_BASE_ADDR 0x018 +#define MV64460_CS_2_SIZE 0x020 +#define MV64460_CS_3_BASE_ADDR 0x218 +#define MV64460_CS_3_SIZE 0x220 + +/* Devices BAR and size registers */ + +#define MV64460_DEV_CS0_BASE_ADDR 0x028 +#define MV64460_DEV_CS0_SIZE 0x030 +#define MV64460_DEV_CS1_BASE_ADDR 0x228 +#define MV64460_DEV_CS1_SIZE 0x230 +#define MV64460_DEV_CS2_BASE_ADDR 0x248 +#define MV64460_DEV_CS2_SIZE 0x250 +#define MV64460_DEV_CS3_BASE_ADDR 0x038 +#define MV64460_DEV_CS3_SIZE 0x040 +#define MV64460_BOOTCS_BASE_ADDR 0x238 +#define MV64460_BOOTCS_SIZE 0x240 + +/* PCI 0 BAR and size registers */ + +#define MV64460_PCI_0_IO_BASE_ADDR 0x048 +#define MV64460_PCI_0_IO_SIZE 0x050 +#define MV64460_PCI_0_MEMORY0_BASE_ADDR 0x058 +#define MV64460_PCI_0_MEMORY0_SIZE 0x060 +#define MV64460_PCI_0_MEMORY1_BASE_ADDR 0x080 +#define MV64460_PCI_0_MEMORY1_SIZE 0x088 +#define MV64460_PCI_0_MEMORY2_BASE_ADDR 0x258 +#define MV64460_PCI_0_MEMORY2_SIZE 0x260 +#define MV64460_PCI_0_MEMORY3_BASE_ADDR 0x280 +#define MV64460_PCI_0_MEMORY3_SIZE 0x288 + +/* PCI 1 BAR and size registers */ +#define MV64460_PCI_1_IO_BASE_ADDR 0x090 +#define MV64460_PCI_1_IO_SIZE 0x098 +#define MV64460_PCI_1_MEMORY0_BASE_ADDR 0x0a0 +#define MV64460_PCI_1_MEMORY0_SIZE 0x0a8 +#define MV64460_PCI_1_MEMORY1_BASE_ADDR 0x0b0 +#define MV64460_PCI_1_MEMORY1_SIZE 0x0b8 +#define MV64460_PCI_1_MEMORY2_BASE_ADDR 0x2a0 +#define MV64460_PCI_1_MEMORY2_SIZE 0x2a8 +#define MV64460_PCI_1_MEMORY3_BASE_ADDR 0x2b0 +#define MV64460_PCI_1_MEMORY3_SIZE 0x2b8 + +/* SRAM base address */ +#define MV64460_INTEGRATED_SRAM_BASE_ADDR 0x268 + +/* internal registers space base address */ +#define MV64460_INTERNAL_SPACE_BASE_ADDR 0x068 + +/* Enables the CS , DEV_CS , PCI 0 and PCI 1 + windows above */ +#define MV64460_BASE_ADDR_ENABLE 0x278 + +/****************************************/ +/* PCI remap registers */ +/****************************************/ + /* PCI 0 */ +#define MV64460_PCI_0_IO_ADDR_REMAP 0x0f0 +#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8 +#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320 +#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100 +#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328 +#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8 +#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330 +#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300 +#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338 + /* PCI 1 */ +#define MV64460_PCI_1_IO_ADDR_REMAP 0x108 +#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110 +#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340 +#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118 +#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348 +#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310 +#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350 +#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318 +#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358 + +#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0 +#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8 +#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0 +#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8 +#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0 +#define MV64460_CPU_GE_HEADERS_RETARGET_BASE 0x3d8 +#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0 +#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8 + +/****************************************/ +/* CPU Control Registers */ +/****************************************/ + +#define MV64460_CPU_CONFIG 0x000 +#define MV64460_CPU_MODE 0x120 +#define MV64460_CPU_MASTER_CONTROL 0x160 +#define MV64460_CPU_CROSS_BAR_CONTROL_LOW 0x150 +#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH 0x158 +#define MV64460_CPU_CROSS_BAR_TIMEOUT 0x168 + +/****************************************/ +/* SMP RegisterS */ +/****************************************/ + +#define MV64460_SMP_WHO_AM_I 0x200 +#define MV64460_SMP_CPU0_DOORBELL 0x214 +#define MV64460_SMP_CPU0_DOORBELL_CLEAR 0x21C +#define MV64460_SMP_CPU1_DOORBELL 0x224 +#define MV64460_SMP_CPU1_DOORBELL_CLEAR 0x22C +#define MV64460_SMP_CPU0_DOORBELL_MASK 0x234 +#define MV64460_SMP_CPU1_DOORBELL_MASK 0x23C +#define MV64460_SMP_SEMAPHOR0 0x244 +#define MV64460_SMP_SEMAPHOR1 0x24c +#define MV64460_SMP_SEMAPHOR2 0x254 +#define MV64460_SMP_SEMAPHOR3 0x25c +#define MV64460_SMP_SEMAPHOR4 0x264 +#define MV64460_SMP_SEMAPHOR5 0x26c +#define MV64460_SMP_SEMAPHOR6 0x274 +#define MV64460_SMP_SEMAPHOR7 0x27c + +/****************************************/ +/* CPU Sync Barrier Register */ +/****************************************/ + +#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0 +#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8 +#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0 +#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8 + +/****************************************/ +/* CPU Access Protect */ +/****************************************/ + +#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180 +#define MV64460_CPU_PROTECT_WINDOW_0_SIZE 0x188 +#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190 +#define MV64460_CPU_PROTECT_WINDOW_1_SIZE 0x198 +#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0 +#define MV64460_CPU_PROTECT_WINDOW_2_SIZE 0x1a8 +#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0 +#define MV64460_CPU_PROTECT_WINDOW_3_SIZE 0x1b8 + + +/****************************************/ +/* CPU Error Report */ +/****************************************/ + +#define MV64460_CPU_ERROR_ADDR_LOW 0x070 +#define MV64460_CPU_ERROR_ADDR_HIGH 0x078 +#define MV64460_CPU_ERROR_DATA_LOW 0x128 +#define MV64460_CPU_ERROR_DATA_HIGH 0x130 +#define MV64460_CPU_ERROR_PARITY 0x138 +#define MV64460_CPU_ERROR_CAUSE 0x140 +#define MV64460_CPU_ERROR_MASK 0x148 + +/****************************************/ +/* CPU Interface Debug Registers */ +/****************************************/ + +#define MV64460_PUNIT_SLAVE_DEBUG_LOW 0x360 +#define MV64460_PUNIT_SLAVE_DEBUG_HIGH 0x368 +#define MV64460_PUNIT_MASTER_DEBUG_LOW 0x370 +#define MV64460_PUNIT_MASTER_DEBUG_HIGH 0x378 +#define MV64460_PUNIT_MMASK 0x3e4 + +/****************************************/ +/* Integrated SRAM Registers */ +/****************************************/ + +#define MV64460_SRAM_CONFIG 0x380 +#define MV64460_SRAM_TEST_MODE 0X3F4 +#define MV64460_SRAM_ERROR_CAUSE 0x388 +#define MV64460_SRAM_ERROR_ADDR 0x390 +#define MV64460_SRAM_ERROR_ADDR_HIGH 0X3F8 +#define MV64460_SRAM_ERROR_DATA_LOW 0x398 +#define MV64460_SRAM_ERROR_DATA_HIGH 0x3a0 +#define MV64460_SRAM_ERROR_DATA_PARITY 0x3a8 + +/****************************************/ +/* SDRAM Configuration */ +/****************************************/ + +#define MV64460_SDRAM_CONFIG 0x1400 +#define MV64460_D_UNIT_CONTROL_LOW 0x1404 +#define MV64460_D_UNIT_CONTROL_HIGH 0x1424 +#define MV64460_D_UNIT_MMASK 0x14B0 +#define MV64460_SDRAM_TIMING_CONTROL_LOW 0x1408 +#define MV64460_SDRAM_TIMING_CONTROL_HIGH 0x140c +#define MV64460_SDRAM_ADDR_CONTROL 0x1410 +#define MV64460_SDRAM_OPEN_PAGES_CONTROL 0x1414 +#define MV64460_SDRAM_OPERATION 0x1418 +#define MV64460_SDRAM_MODE 0x141c +#define MV64460_EXTENDED_DRAM_MODE 0x1420 +#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430 +#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434 +#define MV64460_SDRAM_CROSS_BAR_TIMEOUT 0x1438 +#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0 +#define MV64460_SDRAM_DATA_PADS_CALIBRATION 0x14c4 + +/****************************************/ +/* SDRAM Error Report */ +/****************************************/ + +#define MV64460_SDRAM_ERROR_DATA_LOW 0x1444 +#define MV64460_SDRAM_ERROR_DATA_HIGH 0x1440 +#define MV64460_SDRAM_ERROR_ADDR 0x1450 +#define MV64460_SDRAM_RECEIVED_ECC 0x1448 +#define MV64460_SDRAM_CALCULATED_ECC 0x144c +#define MV64460_SDRAM_ECC_CONTROL 0x1454 +#define MV64460_SDRAM_ECC_ERROR_COUNTER 0x1458 + +/******************************************/ +/* Controlled Delay Line (CDL) Registers */ +/******************************************/ + +#define MV64460_DFCDL_CONFIG0 0x1480 +#define MV64460_DFCDL_CONFIG1 0x1484 +#define MV64460_DLL_WRITE 0x1488 +#define MV64460_DLL_READ 0x148c +#define MV64460_SRAM_ADDR 0x1490 +#define MV64460_SRAM_DATA0 0x1494 +#define MV64460_SRAM_DATA1 0x1498 +#define MV64460_SRAM_DATA2 0x149c +#define MV64460_DFCL_PROBE 0x14a0 + +/******************************************/ +/* Debug Registers */ +/******************************************/ + +#define MV64460_DUNIT_DEBUG_LOW 0x1460 +#define MV64460_DUNIT_DEBUG_HIGH 0x1464 +#define MV64460_DUNIT_MMASK 0X1b40 + +/****************************************/ +/* Device Parameters */ +/****************************************/ + +#define MV64460_DEVICE_BANK0_PARAMETERS 0x45c +#define MV64460_DEVICE_BANK1_PARAMETERS 0x460 +#define MV64460_DEVICE_BANK2_PARAMETERS 0x464 +#define MV64460_DEVICE_BANK3_PARAMETERS 0x468 +#define MV64460_DEVICE_BOOT_BANK_PARAMETERS 0x46c +#define MV64460_DEVICE_INTERFACE_CONTROL 0x4c0 +#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8 +#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc +#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4 + +/****************************************/ +/* Device interrupt registers */ +/****************************************/ + +#define MV64460_DEVICE_INTERRUPT_CAUSE 0x4d0 +#define MV64460_DEVICE_INTERRUPT_MASK 0x4d4 +#define MV64460_DEVICE_ERROR_ADDR 0x4d8 +#define MV64460_DEVICE_ERROR_DATA 0x4dc +#define MV64460_DEVICE_ERROR_PARITY 0x4e0 + +/****************************************/ +/* Device debug registers */ +/****************************************/ + +#define MV64460_DEVICE_DEBUG_LOW 0x4e4 +#define MV64460_DEVICE_DEBUG_HIGH 0x4e8 +#define MV64460_RUNIT_MMASK 0x4f0 + +/****************************************/ +/* PCI Slave Address Decoding registers */ +/****************************************/ + +#define MV64460_PCI_0_CS_0_BANK_SIZE 0xc08 +#define MV64460_PCI_1_CS_0_BANK_SIZE 0xc88 +#define MV64460_PCI_0_CS_1_BANK_SIZE 0xd08 +#define MV64460_PCI_1_CS_1_BANK_SIZE 0xd88 +#define MV64460_PCI_0_CS_2_BANK_SIZE 0xc0c +#define MV64460_PCI_1_CS_2_BANK_SIZE 0xc8c +#define MV64460_PCI_0_CS_3_BANK_SIZE 0xd0c +#define MV64460_PCI_1_CS_3_BANK_SIZE 0xd8c +#define MV64460_PCI_0_DEVCS_0_BANK_SIZE 0xc10 +#define MV64460_PCI_1_DEVCS_0_BANK_SIZE 0xc90 +#define MV64460_PCI_0_DEVCS_1_BANK_SIZE 0xd10 +#define MV64460_PCI_1_DEVCS_1_BANK_SIZE 0xd90 +#define MV64460_PCI_0_DEVCS_2_BANK_SIZE 0xd18 +#define MV64460_PCI_1_DEVCS_2_BANK_SIZE 0xd98 +#define MV64460_PCI_0_DEVCS_3_BANK_SIZE 0xc14 +#define MV64460_PCI_1_DEVCS_3_BANK_SIZE 0xc94 +#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14 +#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94 +#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c +#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c +#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE 0xd20 +#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE 0xda0 +#define MV64460_PCI_0_P2P_I_O_BAR_SIZE 0xd24 +#define MV64460_PCI_1_P2P_I_O_BAR_SIZE 0xda4 +#define MV64460_PCI_0_CPU_BAR_SIZE 0xd28 +#define MV64460_PCI_1_CPU_BAR_SIZE 0xda8 +#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00 +#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80 +#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c +#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c +#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c +#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc +#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48 +#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8 +#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48 +#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8 +#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c +#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc +#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c +#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc +#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04 +#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84 +#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08 +#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88 +#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C +#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C +#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10 +#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90 +#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50 +#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0 +#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50 +#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0 +#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58 +#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8 +#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54 +#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4 +#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54 +#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4 +#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c +#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc +#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60 +#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0 +#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64 +#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4 +#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68 +#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8 +#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c +#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec +#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70 +#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0 +#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74 +#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4 +#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00 +#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80 +#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38 +#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8 +#define MV64460_PCI_0_ADDR_DECODE_CONTROL 0xd3c +#define MV64460_PCI_1_ADDR_DECODE_CONTROL 0xdbc +#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL 0xF40 +#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0 +#define MV64460_PCI_0_HEADERS_RETARGET_BASE 0xF44 +#define MV64460_PCI_1_HEADERS_RETARGET_BASE 0xFc4 +#define MV64460_PCI_0_HEADERS_RETARGET_HIGH 0xF48 +#define MV64460_PCI_1_HEADERS_RETARGET_HIGH 0xFc8 + +/***********************************/ +/* PCI Control Register Map */ +/***********************************/ + +#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20 +#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0 +#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C +#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C +#define MV64460_PCI_0_COMMAND 0xc00 +#define MV64460_PCI_1_COMMAND 0xc80 +#define MV64460_PCI_0_MODE 0xd00 +#define MV64460_PCI_1_MODE 0xd80 +#define MV64460_PCI_0_RETRY 0xc04 +#define MV64460_PCI_1_RETRY 0xc84 +#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04 +#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84 +#define MV64460_PCI_0_MSI_TRIGGER_TIMER 0xc38 +#define MV64460_PCI_1_MSI_TRIGGER_TIMER 0xcb8 +#define MV64460_PCI_0_ARBITER_CONTROL 0x1d00 +#define MV64460_PCI_1_ARBITER_CONTROL 0x1d80 +#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08 +#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88 +#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c +#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c +#define MV64460_PCI_0_CROSS_BAR_TIMEOUT 0x1d04 +#define MV64460_PCI_1_CROSS_BAR_TIMEOUT 0x1d84 +#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18 +#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98 +#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10 +#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90 +#define MV64460_PCI_0_P2P_CONFIG 0x1d14 +#define MV64460_PCI_1_P2P_CONFIG 0x1d94 + +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50 +#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54 +#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58 + +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0 +#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4 +#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8 + +/****************************************/ +/* PCI Configuration Access Registers */ +/****************************************/ + +#define MV64460_PCI_0_CONFIG_ADDR 0xcf8 +#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc +#define MV64460_PCI_1_CONFIG_ADDR 0xc78 +#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c +#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34 +#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4 + +/****************************************/ +/* PCI Error Report Registers */ +/****************************************/ + +#define MV64460_PCI_0_SERR_MASK 0xc28 +#define MV64460_PCI_1_SERR_MASK 0xca8 +#define MV64460_PCI_0_ERROR_ADDR_LOW 0x1d40 +#define MV64460_PCI_1_ERROR_ADDR_LOW 0x1dc0 +#define MV64460_PCI_0_ERROR_ADDR_HIGH 0x1d44 +#define MV64460_PCI_1_ERROR_ADDR_HIGH 0x1dc4 +#define MV64460_PCI_0_ERROR_ATTRIBUTE 0x1d48 +#define MV64460_PCI_1_ERROR_ATTRIBUTE 0x1dc8 +#define MV64460_PCI_0_ERROR_COMMAND 0x1d50 +#define MV64460_PCI_1_ERROR_COMMAND 0x1dd0 +#define MV64460_PCI_0_ERROR_CAUSE 0x1d58 +#define MV64460_PCI_1_ERROR_CAUSE 0x1dd8 +#define MV64460_PCI_0_ERROR_MASK 0x1d5c +#define MV64460_PCI_1_ERROR_MASK 0x1ddc + +/****************************************/ +/* PCI Debug Registers */ +/****************************************/ + +#define MV64460_PCI_0_MMASK 0X1D24 +#define MV64460_PCI_1_MMASK 0X1DA4 + +/*********************************************/ +/* PCI Configuration, Function 0, Registers */ +/*********************************************/ + +#define MV64460_PCI_DEVICE_AND_VENDOR_ID 0x000 +#define MV64460_PCI_STATUS_AND_COMMAND 0x004 +#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID 0x008 +#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C + +#define MV64460_PCI_SCS_0_BASE_ADDR_LOW 0x010 +#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH 0x014 +#define MV64460_PCI_SCS_1_BASE_ADDR_LOW 0x018 +#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH 0x01C +#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020 +#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024 +#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c +#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030 +#define MV64460_PCI_CAPABILTY_LIST_POINTER 0x034 +#define MV64460_PCI_INTERRUPT_PIN_AND_LINE 0x03C + /* capability list */ +#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY 0x040 +#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044 +#define MV64460_PCI_VPD_ADDR 0x048 +#define MV64460_PCI_VPD_DATA 0x04c +#define MV64460_PCI_MSI_MESSAGE_CONTROL 0x050 +#define MV64460_PCI_MSI_MESSAGE_ADDR 0x054 +#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR 0x058 +#define MV64460_PCI_MSI_MESSAGE_DATA 0x05c +#define MV64460_PCI_X_COMMAND 0x060 +#define MV64460_PCI_X_STATUS 0x064 +#define MV64460_PCI_COMPACT_PCI_HOT_SWAP 0x068 + +/***********************************************/ +/* PCI Configuration, Function 1, Registers */ +/***********************************************/ + +#define MV64460_PCI_SCS_2_BASE_ADDR_LOW 0x110 +#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH 0x114 +#define MV64460_PCI_SCS_3_BASE_ADDR_LOW 0x118 +#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH 0x11c +#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120 +#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124 + +/***********************************************/ +/* PCI Configuration, Function 2, Registers */ +/***********************************************/ + +#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW 0x210 +#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214 +#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW 0x218 +#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c +#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW 0x220 +#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224 + +/***********************************************/ +/* PCI Configuration, Function 3, Registers */ +/***********************************************/ + +#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW 0x310 +#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314 +#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW 0x318 +#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c +#define MV64460_PCI_CPU_BASE_ADDR_LOW 0x220 +#define MV64460_PCI_CPU_BASE_ADDR_HIGH 0x224 + +/***********************************************/ +/* PCI Configuration, Function 4, Registers */ +/***********************************************/ + +#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410 +#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414 +#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418 +#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c +#define MV64460_PCI_P2P_I_O_BASE_ADDR 0x420 +#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424 + +/****************************************/ +/* Messaging Unit Registers (I20) */ +/****************************************/ + +#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010 +#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C +#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020 +#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024 +#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028 +#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C +#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030 +#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034 +#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040 +#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044 +#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050 +#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054 +#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060 +#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064 +#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068 +#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C +#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070 +#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074 +#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8 +#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC + +#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090 +#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C +#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0 +#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4 +#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8 +#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC +#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0 +#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4 +#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0 +#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4 +#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0 +#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4 +#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0 +#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4 +#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8 +#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC +#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0 +#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4 +#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078 +#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C + +#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10 +#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C +#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20 +#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24 +#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28 +#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C +#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30 +#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34 +#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40 +#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44 +#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50 +#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54 +#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60 +#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64 +#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68 +#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C +#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70 +#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74 +#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8 +#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC +#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90 +#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98 +#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C +#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0 +#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4 +#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8 +#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC +#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0 +#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4 +#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0 +#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4 +#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0 +#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4 +#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0 +#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4 +#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8 +#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC +#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0 +#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4 +#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78 +#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C + +/****************************************/ +/* Ethernet Unit Registers */ +/****************************************/ + +#define MV64460_ETH_PHY_ADDR_REG 0x2000 +#define MV64460_ETH_SMI_REG 0x2004 +#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG 0x2008 +#define MV64460_ETH_UNIT_DEFAULTID_REG 0x200c +#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG 0x2080 +#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG 0x2084 +#define MV64460_ETH_UNIT_INTERNAL_USE_REG 0x24fc +#define MV64460_ETH_UNIT_ERROR_ADDR_REG 0x2094 +#define MV64460_ETH_BAR_0 0x2200 +#define MV64460_ETH_BAR_1 0x2208 +#define MV64460_ETH_BAR_2 0x2210 +#define MV64460_ETH_BAR_3 0x2218 +#define MV64460_ETH_BAR_4 0x2220 +#define MV64460_ETH_BAR_5 0x2228 +#define MV64460_ETH_SIZE_REG_0 0x2204 +#define MV64460_ETH_SIZE_REG_1 0x220c +#define MV64460_ETH_SIZE_REG_2 0x2214 +#define MV64460_ETH_SIZE_REG_3 0x221c +#define MV64460_ETH_SIZE_REG_4 0x2224 +#define MV64460_ETH_SIZE_REG_5 0x222c +#define MV64460_ETH_HEADERS_RETARGET_BASE_REG 0x2230 +#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG 0x2234 +#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0 0x2280 +#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1 0x2284 +#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2 0x2288 +#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3 0x228c +#define MV64460_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV64460_ETH_ACCESS_PROTECTION_REG(port) (0x2294 + (port<<2)) +#define MV64460_ETH_MIB_COUNTERS_BASE(port) (0x3000 + (port<<7)) +#define MV64460_ETH_PORT_CONFIG_REG(port) (0x2400 + (port<<10)) +#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port) (0x2404 + (port<<10)) +#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port) (0x2408 + (port<<10)) +#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port) (0x240c + (port<<10)) +#define MV64460_ETH_VLAN_ETHERTYPE_REG(port) (0x2410 + (port<<10)) +#define MV64460_ETH_MAC_ADDR_LOW(port) (0x2414 + (port<<10)) +#define MV64460_ETH_MAC_ADDR_HIGH(port) (0x2418 + (port<<10)) +#define MV64460_ETH_SDMA_CONFIG_REG(port) (0x241c + (port<<10)) +#define MV64460_ETH_DSCP_0(port) (0x2420 + (port<<10)) +#define MV64460_ETH_DSCP_1(port) (0x2424 + (port<<10)) +#define MV64460_ETH_DSCP_2(port) (0x2428 + (port<<10)) +#define MV64460_ETH_DSCP_3(port) (0x242c + (port<<10)) +#define MV64460_ETH_DSCP_4(port) (0x2430 + (port<<10)) +#define MV64460_ETH_DSCP_5(port) (0x2434 + (port<<10)) +#define MV64460_ETH_DSCP_6(port) (0x2438 + (port<<10)) +#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port) (0x243c + (port<<10)) +#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port) (0x2440 + (port<<10)) +#define MV64460_ETH_PORT_STATUS_REG(port) (0x2444 + (port<<10)) +#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port) (0x2448 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port) (0x244c + (port<<10)) +#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port) (0x2450 + (port<<10)) +#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port) (0x2458 + (port<<10)) +#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port) (0x245c + (port<<10)) +#define MV64460_ETH_INTERRUPT_CAUSE_REG(port) (0x2460 + (port<<10)) +#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port) (0x2464 + (port<<10)) +#define MV64460_ETH_INTERRUPT_MASK_REG(port) (0x2468 + (port<<10)) +#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port) (0x246c + (port<<10)) +#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port) (0x2470 + (port<<10)) +#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port) (0x2474 + (port<<10)) +#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (0x247c + (port<<10)) +#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port) (0x2484 + (port<<10) +#define MV64460_ETH_PORT_DEBUG_0_REG(port) (0x248c + (port<<10)) +#define MV64460_ETH_PORT_DEBUG_1_REG(port) (0x2490 + (port<<10)) +#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port) (0x2494 + (port<<10)) +#define MV64460_ETH_INTERNAL_USE_REG(port) (0x24fc + (port<<10)) +#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port) (0x2680 + (port<<10)) +#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port) (0x2684 + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port) (0x260c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port) (0x261c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port) (0x262c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port) (0x263c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port) (0x264c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port) (0x265c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port) (0x266c + (port<<10)) +#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port) (0x267c + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port) (0x26c0 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port) (0x26c4 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port) (0x26c8 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port) (0x26cc + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port) (0x26d0 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port) (0x26d4 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port) (0x26d8 + (port<<10)) +#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port) (0x26dc + (port<<10)) +#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port) (0x2700 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port) (0x2710 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port) (0x2720 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port) (0x2730 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port) (0x2740 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port) (0x2750 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port) (0x2760 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port) (0x2770 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port) (0x2704 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port) (0x2714 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port) (0x2724 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port) (0x2734 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port) (0x2744 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port) (0x2754 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port) (0x2764 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port) (0x2774 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port) (0x2708 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port) (0x2718 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port) (0x2728 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port) (0x2738 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port) (0x2748 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port) (0x2758 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port) (0x2768 + (port<<10)) +#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port) (0x2778 + (port<<10)) +#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port) (0x2780 + (port<<10)) +#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port) (0x3400 + (port<<10)) +#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port) (0x3500 + (port<<10)) +#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port) (0x3600 + (port<<10)) + +/*******************************************/ +/* CUNIT Registers */ +/*******************************************/ + + /* Address Decoding Register Map */ + +#define MV64460_CUNIT_BASE_ADDR_REG0 0xf200 +#define MV64460_CUNIT_BASE_ADDR_REG1 0xf208 +#define MV64460_CUNIT_BASE_ADDR_REG2 0xf210 +#define MV64460_CUNIT_BASE_ADDR_REG3 0xf218 +#define MV64460_CUNIT_SIZE0 0xf204 +#define MV64460_CUNIT_SIZE1 0xf20c +#define MV64460_CUNIT_SIZE2 0xf214 +#define MV64460_CUNIT_SIZE3 0xf21c +#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240 +#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244 +#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG 0xf250 +#define MV64460_MPSC0_ACCESS_PROTECTION_REG 0xf254 +#define MV64460_MPSC1_ACCESS_PROTECTION_REG 0xf258 +#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C + + /* Error Report Registers */ + +#define MV64460_CUNIT_INTERRUPT_CAUSE_REG 0xf310 +#define MV64460_CUNIT_INTERRUPT_MASK_REG 0xf314 +#define MV64460_CUNIT_ERROR_ADDR 0xf318 + + /* Cunit Control Registers */ + +#define MV64460_CUNIT_ARBITER_CONTROL_REG 0xf300 +#define MV64460_CUNIT_CONFIG_REG 0xb40c +#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304 + + /* Cunit Debug Registers */ + +#define MV64460_CUNIT_DEBUG_LOW 0xf340 +#define MV64460_CUNIT_DEBUG_HIGH 0xf344 +#define MV64460_CUNIT_MMASK 0xf380 + + /* Cunit Base Address Enable Window Bits*/ +#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT 0x0 +#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT 0x1 +#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT 0x2 +#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT 0x3 + + /* MPSCs Clocks Routing Registers */ + +#define MV64460_MPSC_ROUTING_REG 0xb400 +#define MV64460_MPSC_RX_CLOCK_ROUTING_REG 0xb404 +#define MV64460_MPSC_TX_CLOCK_ROUTING_REG 0xb408 + + /* MPSCs Interrupts Registers */ + +#define MV64460_MPSC_CAUSE_REG(port) (0xb804 + (port<<3)) +#define MV64460_MPSC_MASK_REG(port) (0xb884 + (port<<3)) + +#define MV64460_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12)) +#define MV64460_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12)) +#define MV64460_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12)) +#define MV64460_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12)) + + /* MPSC0 Registers */ + + +/***************************************/ +/* SDMA Registers */ +/***************************************/ + +#define MV64460_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13)) +#define MV64460_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13)) +#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13)) +#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13)) +#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13)) + +#define MV64460_SDMA_CAUSE_REG 0xb800 +#define MV64460_SDMA_MASK_REG 0xb880 + + +/****************************************/ +/* SDMA Address Space Targets */ +/****************************************/ + +#define MV64460_SDMA_DRAM_CS_0_TARGET 0x0e00 +#define MV64460_SDMA_DRAM_CS_1_TARGET 0x0d00 +#define MV64460_SDMA_DRAM_CS_2_TARGET 0x0b00 +#define MV64460_SDMA_DRAM_CS_3_TARGET 0x0700 + +#define MV64460_SDMA_DEV_CS_0_TARGET 0x1e01 +#define MV64460_SDMA_DEV_CS_1_TARGET 0x1d01 +#define MV64460_SDMA_DEV_CS_2_TARGET 0x1b01 +#define MV64460_SDMA_DEV_CS_3_TARGET 0x1701 + +#define MV64460_SDMA_BOOT_CS_TARGET 0x0f00 + +#define MV64460_SDMA_SRAM_TARGET 0x0003 +#define MV64460_SDMA_60X_BUS_TARGET 0x4003 + +#define MV64460_PCI_0_TARGET 0x0003 +#define MV64460_PCI_1_TARGET 0x0004 + + +/* Devices BAR and size registers */ + +#define MV64460_DEV_CS0_BASE_ADDR 0x028 +#define MV64460_DEV_CS0_SIZE 0x030 +#define MV64460_DEV_CS1_BASE_ADDR 0x228 +#define MV64460_DEV_CS1_SIZE 0x230 +#define MV64460_DEV_CS2_BASE_ADDR 0x248 +#define MV64460_DEV_CS2_SIZE 0x250 +#define MV64460_DEV_CS3_BASE_ADDR 0x038 +#define MV64460_DEV_CS3_SIZE 0x040 +#define MV64460_BOOTCS_BASE_ADDR 0x238 +#define MV64460_BOOTCS_SIZE 0x240 + +/* SDMA Window access protection */ +#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0 +#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1 +#define MV64460_SDMA_WIN_ACCESS_FULL 2 + +/* BRG Interrupts */ + +#define MV64460_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3)) +#define MV64460_BRG_BAUDE_TUNING_REG(brg) (0xb204 + (brg<<3)) +#define MV64460_BRG_CAUSE_REG 0xb834 +#define MV64460_BRG_MASK_REG 0xb8b4 + +/****************************************/ +/* DMA Channel Control */ +/****************************************/ + +#define MV64460_DMA_CHANNEL0_CONTROL 0x840 +#define MV64460_DMA_CHANNEL0_CONTROL_HIGH 0x880 +#define MV64460_DMA_CHANNEL1_CONTROL 0x844 +#define MV64460_DMA_CHANNEL1_CONTROL_HIGH 0x884 +#define MV64460_DMA_CHANNEL2_CONTROL 0x848 +#define MV64460_DMA_CHANNEL2_CONTROL_HIGH 0x888 +#define MV64460_DMA_CHANNEL3_CONTROL 0x84C +#define MV64460_DMA_CHANNEL3_CONTROL_HIGH 0x88C + + +/****************************************/ +/* IDMA Registers */ +/****************************************/ + +#define MV64460_DMA_CHANNEL0_BYTE_COUNT 0x800 +#define MV64460_DMA_CHANNEL1_BYTE_COUNT 0x804 +#define MV64460_DMA_CHANNEL2_BYTE_COUNT 0x808 +#define MV64460_DMA_CHANNEL3_BYTE_COUNT 0x80C +#define MV64460_DMA_CHANNEL0_SOURCE_ADDR 0x810 +#define MV64460_DMA_CHANNEL1_SOURCE_ADDR 0x814 +#define MV64460_DMA_CHANNEL2_SOURCE_ADDR 0x818 +#define MV64460_DMA_CHANNEL3_SOURCE_ADDR 0x81c +#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR 0x820 +#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR 0x824 +#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR 0x828 +#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR 0x82C +#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830 +#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834 +#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838 +#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C +#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870 +#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874 +#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878 +#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C + + /* IDMA Address Decoding Base Address Registers */ + +#define MV64460_DMA_BASE_ADDR_REG0 0xa00 +#define MV64460_DMA_BASE_ADDR_REG1 0xa08 +#define MV64460_DMA_BASE_ADDR_REG2 0xa10 +#define MV64460_DMA_BASE_ADDR_REG3 0xa18 +#define MV64460_DMA_BASE_ADDR_REG4 0xa20 +#define MV64460_DMA_BASE_ADDR_REG5 0xa28 +#define MV64460_DMA_BASE_ADDR_REG6 0xa30 +#define MV64460_DMA_BASE_ADDR_REG7 0xa38 + + /* IDMA Address Decoding Size Address Register */ + +#define MV64460_DMA_SIZE_REG0 0xa04 +#define MV64460_DMA_SIZE_REG1 0xa0c +#define MV64460_DMA_SIZE_REG2 0xa14 +#define MV64460_DMA_SIZE_REG3 0xa1c +#define MV64460_DMA_SIZE_REG4 0xa24 +#define MV64460_DMA_SIZE_REG5 0xa2c +#define MV64460_DMA_SIZE_REG6 0xa34 +#define MV64460_DMA_SIZE_REG7 0xa3C + + /* IDMA Address Decoding High Address Remap and Access + Protection Registers */ + +#define MV64460_DMA_HIGH_ADDR_REMAP_REG0 0xa60 +#define MV64460_DMA_HIGH_ADDR_REMAP_REG1 0xa64 +#define MV64460_DMA_HIGH_ADDR_REMAP_REG2 0xa68 +#define MV64460_DMA_HIGH_ADDR_REMAP_REG3 0xa6C +#define MV64460_DMA_BASE_ADDR_ENABLE_REG 0xa80 +#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70 +#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74 +#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78 +#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c +#define MV64460_DMA_ARBITER_CONTROL 0x860 +#define MV64460_DMA_CROSS_BAR_TIMEOUT 0x8d0 + + /* IDMA Headers Retarget Registers */ + +#define MV64460_DMA_HEADERS_RETARGET_CONTROL 0xa84 +#define MV64460_DMA_HEADERS_RETARGET_BASE 0xa88 + + /* IDMA Interrupt Register */ + +#define MV64460_DMA_INTERRUPT_CAUSE_REG 0x8c0 +#define MV64460_DMA_INTERRUPT_CAUSE_MASK 0x8c4 +#define MV64460_DMA_ERROR_ADDR 0x8c8 +#define MV64460_DMA_ERROR_SELECT 0x8cc + + /* IDMA Debug Register ( for internal use ) */ + +#define MV64460_DMA_DEBUG_LOW 0x8e0 +#define MV64460_DMA_DEBUG_HIGH 0x8e4 +#define MV64460_DMA_SPARE 0xA8C + +/****************************************/ +/* Timer_Counter */ +/****************************************/ + +#define MV64460_TIMER_COUNTER0 0x850 +#define MV64460_TIMER_COUNTER1 0x854 +#define MV64460_TIMER_COUNTER2 0x858 +#define MV64460_TIMER_COUNTER3 0x85C +#define MV64460_TIMER_COUNTER_0_3_CONTROL 0x864 +#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868 +#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c + +/****************************************/ +/* Watchdog registers */ +/****************************************/ + +#define MV64460_WATCHDOG_CONFIG_REG 0xb410 +#define MV64460_WATCHDOG_VALUE_REG 0xb414 + +/****************************************/ +/* I2C Registers */ +/****************************************/ + +#define MV64460_I2C_SLAVE_ADDR 0xc000 +#define MV64460_I2C_EXTENDED_SLAVE_ADDR 0xc010 +#define MV64460_I2C_DATA 0xc004 +#define MV64460_I2C_CONTROL 0xc008 +#define MV64460_I2C_STATUS_BAUDE_RATE 0xc00C +#define MV64460_I2C_SOFT_RESET 0xc01c + +/****************************************/ +/* GPP Interface Registers */ +/****************************************/ + +#define MV64460_GPP_IO_CONTROL 0xf100 +#define MV64460_GPP_LEVEL_CONTROL 0xf110 +#define MV64460_GPP_VALUE 0xf104 +#define MV64460_GPP_INTERRUPT_CAUSE 0xf108 +#define MV64460_GPP_INTERRUPT_MASK0 0xf10c +#define MV64460_GPP_INTERRUPT_MASK1 0xf114 +#define MV64460_GPP_VALUE_SET 0xf118 +#define MV64460_GPP_VALUE_CLEAR 0xf11c + +/****************************************/ +/* Interrupt Controller Registers */ +/****************************************/ + +/****************************************/ +/* Interrupts */ +/****************************************/ + +#define MV64460_MAIN_INTERRUPT_CAUSE_LOW 0x004 +#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH 0x00c +#define MV64460_CPU_INTERRUPT0_MASK_LOW 0x014 +#define MV64460_CPU_INTERRUPT0_MASK_HIGH 0x01c +#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE 0x024 +#define MV64460_CPU_INTERRUPT1_MASK_LOW 0x034 +#define MV64460_CPU_INTERRUPT1_MASK_HIGH 0x03c +#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE 0x044 +#define MV64460_INTERRUPT0_MASK_0_LOW 0x054 +#define MV64460_INTERRUPT0_MASK_0_HIGH 0x05c +#define MV64460_INTERRUPT0_SELECT_CAUSE 0x064 +#define MV64460_INTERRUPT1_MASK_0_LOW 0x074 +#define MV64460_INTERRUPT1_MASK_0_HIGH 0x07c +#define MV64460_INTERRUPT1_SELECT_CAUSE 0x084 + +/****************************************/ +/* MPP Interface Registers */ +/****************************************/ + +#define MV64460_MPP_CONTROL0 0xf000 +#define MV64460_MPP_CONTROL1 0xf004 +#define MV64460_MPP_CONTROL2 0xf008 +#define MV64460_MPP_CONTROL3 0xf00c + +/****************************************/ +/* Serial Initialization registers */ +/****************************************/ + +#define MV64460_SERIAL_INIT_LAST_DATA 0xf324 +#define MV64460_SERIAL_INIT_CONTROL 0xf328 +#define MV64460_SERIAL_INIT_STATUS 0xf32c + + +#endif /* __INCgt64460rh */ diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c new file mode 100644 index 0000000000..6cebd1aeb6 --- /dev/null +++ b/board/prodrive/p3mx/p3mx.c @@ -0,0 +1,809 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Based on original work by + * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. + * Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com + * modifications for the cpci750 by reinhard.arlt@esd-electronics.com + * modifications for the P3M750 by roel.loeffen@prodrive.nl + */ + +/* + * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448. + */ + +#include +#include <74xx_7xx.h> +#include "../../Marvell/include/memory.h" +#include "../../Marvell/include/pci.h" +#include "../../Marvell/include/mv_gen_reg.h" +#include +#include + +#include "eth.h" +#include "mpsc.h" +#include "64460.h" +#include "mv_regs.h" + +DECLARE_GLOBAL_DATA_PTR; + +#undef DEBUG +/*#define DEBUG */ + +#ifdef CONFIG_PCI +#define MAP_PCI +#endif /* of CONFIG_PCI */ + +#ifdef DEBUG +#define DP(x) x +#else +#define DP(x) +#endif + +extern void flush_data_cache (void); +extern void invalidate_l1_instruction_cache (void); +extern flash_info_t flash_info[]; + +/* ------------------------------------------------------------------------- */ + +/* this is the current GT register space location */ +/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */ + +/* Unfortunately, we cant change it while we are in flash, so we initialize it + * to the "final" value. This means that any debug_led calls before + * board_early_init_f wont work right (like in cpu_init_f). + * See also my_remap_gt_regs below. (NTL) + */ + +void board_prebootm_init (void); +unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS; +int display_mem_map (void); + +/* ------------------------------------------------------------------------- */ + +/* + * This is a version of the GT register space remapping function that + * doesn't touch globals (meaning, it's ok to run from flash.) + * + * Unfortunately, this has the side effect that a writable + * INTERNAL_REG_BASE_ADDR is impossible. Oh well. + */ + +void my_remap_gt_regs (u32 cur_loc, u32 new_loc) +{ + u32 temp; + + /* check and see if it's already moved */ + temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); + if ((temp & 0xffff) == new_loc >> 16) + return; + + temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & + 0xffff0000) | (new_loc >> 16); + + out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); + + while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp); +} + +#ifdef CONFIG_PCI + +static void gt_pci_config (void) +{ + unsigned int stat; + unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, */ + /* FuncNum 10:8, RegNum 7:2 */ + + /* + * In PCIX mode devices provide their own bus and device numbers. + * We query the Discovery II's + * config registers by writing ones to the bus and device. + * We then update the Virtual register with the correct value for the + * bus and device. + */ + if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ + GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); + + GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat); + + GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); + GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG, + (stat & 0xffff0000) | CFG_PCI_IDSEL); + + } + if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ + GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); + GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat); + + GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); + GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG, + (stat & 0xffff0000) | CFG_PCI_IDSEL); + } + + /* Enable master */ + PCI_MASTER_ENABLE (0, SELF); + PCI_MASTER_ENABLE (1, SELF); + + /* Enable PCI0/1 Mem0 and IO 0 disable all others */ + GT_REG_READ (BASE_ADDR_ENABLE, &stat); + stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | + (1 << 18); + stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15)); + GT_REG_WRITE (BASE_ADDR_ENABLE, stat); + + /* ronen: + * add write to pci remap registers for 64460. + * in 64360 when writing to pci base go and overide remap automaticaly, + * in 64460 it doesn't + */ + GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16); + GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16); + GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16); + + GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16); + GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16); + GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16); + + GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16); + GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16); + GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16); + + GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16); + GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16); + GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16); + + /* PCI interface settings */ + /* Timeout set to retry forever */ + GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0); + GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0); + + /* ronen - enable only CS0 and Internal reg!! */ + GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); + GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); + + /* ronen: + * update the pci internal registers base address. + */ +#ifdef MAP_PCI + for (stat = 0; stat <= PCI_HOST1; stat++) + pciWriteConfigReg (stat, + PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, + SELF, CFG_GT_REGS); +#endif + +} +#endif + +/* Setup CPU interface paramaters */ +static void gt_cpu_config (void) +{ + cpu_t cpu = get_cpu_type (); + ulong tmp; + + /* cpu configuration register */ + tmp = GTREGREAD (CPU_CONFIGURATION); + /* set the SINGLE_CPU bit see MV64460 */ +#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */ + tmp |= CPU_CONF_SINGLE_CPU; +#endif + tmp &= ~CPU_CONF_AACK_DELAY_2; + tmp |= CPU_CONF_DP_VALID; + tmp |= CPU_CONF_AP_VALID; + tmp |= CPU_CONF_PIPELINE; + GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */ + + /* CPU master control register */ + tmp = GTREGREAD (CPU_MASTER_CONTROL); + tmp |= CPU_MAST_CTL_ARB_EN; + + if ((cpu == CPU_7400) || + (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) { + + tmp |= CPU_MAST_CTL_CLEAN_BLK; + tmp |= CPU_MAST_CTL_FLUSH_BLK; + + } else { + /* cleanblock must be cleared for CPUs + * that do not support this command (603e, 750) + * see Res#1 */ + tmp &= ~CPU_MAST_CTL_CLEAN_BLK; + tmp &= ~CPU_MAST_CTL_FLUSH_BLK; + } + GT_REG_WRITE (CPU_MASTER_CONTROL, tmp); +} + +/* + * board_early_init_f. + * + * set up gal. device mappings, etc. + */ +int board_early_init_f (void) +{ + /* set up the GT the way the kernel wants it + * the call to move the GT register space will obviously + * fail if it has already been done, but we're going to assume + * that if it's not at the power-on location, it's where we put + * it last time. (huber) + */ + + my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS); + +#ifdef CONFIG_PCI + gt_pci_config (); +#endif + /* mask all external interrupt sources */ + GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0); + GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0); + /* new in >MV6436x */ + GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0); + GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0); + /* --------------------- */ + GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); + GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); + GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); + GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); + + /* Device and Boot bus settings + */ + memoryMapDeviceSpace(DEVICE0, 0, 0); + GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0); + memoryMapDeviceSpace(DEVICE1, 0, 0); + GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0); + memoryMapDeviceSpace(DEVICE2, 0, 0); + GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0); + memoryMapDeviceSpace(DEVICE3, 0, 0); + GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0); + + GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR); + + gt_cpu_config(); + + /* MPP setup */ + GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0); + GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1); + GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2); + GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3); + + GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL); + + return 0; +} + +/* various things to do after relocation */ + +int misc_init_r () +{ + u8 val; + + icache_enable (); +#ifdef CFG_L2 + l2cache_enable (); +#endif +#ifdef CONFIG_MPSC + mpsc_sdma_init (); + mpsc_init2 (); +#endif + + /* + * Enable trickle changing in RTC upon powerup + * No diode, 250 ohm series resistor + */ + val = 0xa5; + i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1); + + return 0; +} + +int board_early_init_r(void) +{ + /* now relocate the debug serial driver */ + mpsc_putchar += gd->reloc_off; + mpsc_getchar += gd->reloc_off; + mpsc_test_char += gd->reloc_off; + + return 0; +} + +void after_reloc (ulong dest_addr, gd_t * gd) +{ + memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE); + +/* display_mem_map(); */ + + /* now, jump to the main U-Boot board init code */ + board_init_r (gd, dest_addr); + /* NOTREACHED */ +} + +/* + * Check Board Identity: + * right now, assume borad type. (there is just one...after all) + */ + +int checkboard (void) +{ + char *s = getenv("serial#"); + + printf("Board: %s", CFG_BOARD_NAME); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +/* utility functions */ +void debug_led (int led, int mode) +{ +} + +int display_mem_map (void) +{ + int i, j; + unsigned int base, size, width; + + /* SDRAM */ + printf ("SD (DDR) RAM\n"); + for (i = 0; i <= BANK3; i++) { + base = memoryGetBankBaseAddress (i); + size = memoryGetBankSize (i); + if (size != 0) + printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n", + i, base, size >> 20); + } +#ifdef CONFIG_PCI + /* CPU's PCI windows */ + for (i = 0; i <= PCI_HOST1; i++) { + printf ("\nCPU's PCI %d windows\n", i); + base = pciGetSpaceBase (i, PCI_IO); + size = pciGetSpaceSize (i, PCI_IO); + printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base, + size >> 20); + /* ronen currently only first PCI MEM is used 3 */ + for (j = 0; j <= PCI_REGION0; j++) { + base = pciGetSpaceBase (i, j); + size = pciGetSpaceSize (i, j); + printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", + j, base, size >> 20); + } + } +#endif /* of CONFIG_PCI */ + + /* Bootrom */ + base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */ + size = memoryGetDeviceSize (BOOT_DEVICE); + width = memoryGetDeviceWidth (BOOT_DEVICE) * 8; + printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\t- FLASH\n", + base, size >> 20, width); + + return (0); +} + +/* DRAM check routines copied from gw8260 */ + +#if defined (CFG_DRAM_TEST) + +/*********************************************************************/ +/* NAME: move64() - moves a double word (64-bit) */ +/* */ +/* DESCRIPTION: */ +/* this function performs a double word move from the data at */ +/* the source pointer to the location at the destination pointer. */ +/* */ +/* INPUTS: */ +/* unsigned long long *src - pointer to data to move */ +/* */ +/* OUTPUTS: */ +/* unsigned long long *dest - pointer to locate to move data */ +/* */ +/* RETURNS: */ +/* None */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* May cloober fr0. */ +/* */ +/*********************************************************************/ +static void move64 (unsigned long long *src, unsigned long long *dest) +{ + asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ + "stfd 0, 0(4)" /* *dest = fpr0 */ + : : : "fr0"); /* Clobbers fr0 */ + return; +} + + +#if defined (CFG_DRAM_TEST_DATA) + +unsigned long long pattern[] = { + 0xaaaaaaaaaaaaaaaaULL, + 0xccccccccccccccccULL, + 0xf0f0f0f0f0f0f0f0ULL, + 0xff00ff00ff00ff00ULL, + 0xffff0000ffff0000ULL, + 0xffffffff00000000ULL, + 0x00000000ffffffffULL, + 0x0000ffff0000ffffULL, + 0x00ff00ff00ff00ffULL, + 0x0f0f0f0f0f0f0f0fULL, + 0x3333333333333333ULL, + 0x5555555555555555ULL +}; + +/*********************************************************************/ +/* NAME: mem_test_data() - test data lines for shorts and opens */ +/* */ +/* DESCRIPTION: */ +/* Tests data lines for shorts and opens by forcing adjacent data */ +/* to opposite states. Because the data lines could be routed in */ +/* an arbitrary manner the must ensure test patterns ensure that */ +/* every case is tested. By using the following series of binary */ +/* patterns every combination of adjacent bits is test regardless */ +/* of routing. */ +/* */ +/* ...101010101010101010101010 */ +/* ...110011001100110011001100 */ +/* ...111100001111000011110000 */ +/* ...111111110000000011111111 */ +/* */ +/* Carrying this out, gives us six hex patterns as follows: */ +/* */ +/* 0xaaaaaaaaaaaaaaaa */ +/* 0xcccccccccccccccc */ +/* 0xf0f0f0f0f0f0f0f0 */ +/* 0xff00ff00ff00ff00 */ +/* 0xffff0000ffff0000 */ +/* 0xffffffff00000000 */ +/* */ +/* The number test patterns will always be given by: */ +/* */ +/* log(base 2)(number data bits) = log2 (64) = 6 */ +/* */ +/* To test for short and opens to other signals on our boards. we */ +/* simply */ +/* test with the 1's complemnt of the paterns as well. */ +/* */ +/* OUTPUTS: */ +/* Displays failing test pattern */ +/* */ +/* RETURNS: */ +/* 0 - Passed test */ +/* 1 - Failed test */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* Assumes only one one SDRAM bank */ +/* */ +/*********************************************************************/ +int mem_test_data (void) +{ + unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START; + unsigned long long temp64 = 0; + int num_patterns = sizeof (pattern) / sizeof (pattern[0]); + int i; + unsigned int hi, lo; + + for (i = 0; i < num_patterns; i++) { + move64 (&(pattern[i]), pmem); + move64 (pmem, &temp64); + + /* hi = (temp64>>32) & 0xffffffff; */ + /* lo = temp64 & 0xffffffff; */ + /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ + + hi = (pattern[i] >> 32) & 0xffffffff; + lo = pattern[i] & 0xffffffff; + /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ + + if (temp64 != pattern[i]) { + printf ("\n Data Test Failed, pattern 0x%08x%08x", + hi, lo); + return 1; + } + } + + return 0; +} +#endif /* CFG_DRAM_TEST_DATA */ + +#if defined (CFG_DRAM_TEST_ADDRESS) +/*********************************************************************/ +/* NAME: mem_test_address() - test address lines */ +/* */ +/* DESCRIPTION: */ +/* This function performs a test to verify that each word im */ +/* memory is uniquly addressable. The test sequence is as follows: */ +/* */ +/* 1) write the address of each word to each word. */ +/* 2) verify that each location equals its address */ +/* */ +/* OUTPUTS: */ +/* Displays failing test pattern and address */ +/* */ +/* RETURNS: */ +/* 0 - Passed test */ +/* 1 - Failed test */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* */ +/* */ +/*********************************************************************/ +int mem_test_address (void) +{ + volatile unsigned int *pmem = + (volatile unsigned int *) CFG_MEMTEST_START; + const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4; + unsigned int i; + + /* write address to each location */ + for (i = 0; i < size; i++) + pmem[i] = i; + + /* verify each loaction */ + for (i = 0; i < size; i++) { + if (pmem[i] != i) { + printf ("\n Address Test Failed at 0x%x", i); + return 1; + } + } + return 0; +} +#endif /* CFG_DRAM_TEST_ADDRESS */ + +#if defined (CFG_DRAM_TEST_WALK) +/*********************************************************************/ +/* NAME: mem_march() - memory march */ +/* */ +/* DESCRIPTION: */ +/* Marches up through memory. At each location verifies rmask if */ +/* read = 1. At each location write wmask if write = 1. Displays */ +/* failing address and pattern. */ +/* */ +/* INPUTS: */ +/* volatile unsigned long long * base - start address of test */ +/* unsigned int size - number of dwords(64-bit) to test */ +/* unsigned long long rmask - read verify mask */ +/* unsigned long long wmask - wrtie verify mask */ +/* short read - verifies rmask if read = 1 */ +/* short write - writes wmask if write = 1 */ +/* */ +/* OUTPUTS: */ +/* Displays failing test pattern and address */ +/* */ +/* RETURNS: */ +/* 0 - Passed test */ +/* 1 - Failed test */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* */ +/* */ +/*********************************************************************/ +int mem_march (volatile unsigned long long *base, + unsigned int size, + unsigned long long rmask, + unsigned long long wmask, short read, short write) +{ + unsigned int i; + unsigned long long temp = 0; + unsigned int hitemp, lotemp, himask, lomask; + + for (i = 0; i < size; i++) { + if (read != 0) { + /* temp = base[i]; */ + move64 ((unsigned long long *) &(base[i]), &temp); + if (rmask != temp) { + hitemp = (temp >> 32) & 0xffffffff; + lotemp = temp & 0xffffffff; + himask = (rmask >> 32) & 0xffffffff; + lomask = rmask & 0xffffffff; + + printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp); + return 1; + } + } + if (write != 0) { + /* base[i] = wmask; */ + move64 (&wmask, (unsigned long long *) &(base[i])); + } + } + return 0; +} +#endif /* CFG_DRAM_TEST_WALK */ + +/*********************************************************************/ +/* NAME: mem_test_walk() - a simple walking ones test */ +/* */ +/* DESCRIPTION: */ +/* Performs a walking ones through entire physical memory. The */ +/* test uses as series of memory marches, mem_march(), to verify */ +/* and write the test patterns to memory. The test sequence is as */ +/* follows: */ +/* 1) march writing 0000...0001 */ +/* 2) march verifying 0000...0001 , writing 0000...0010 */ +/* 3) repeat step 2 shifting masks left 1 bit each time unitl */ +/* the write mask equals 1000...0000 */ +/* 4) march verifying 1000...0000 */ +/* The test fails if any of the memory marches return a failure. */ +/* */ +/* OUTPUTS: */ +/* Displays which pass on the memory test is executing */ +/* */ +/* RETURNS: */ +/* 0 - Passed test */ +/* 1 - Failed test */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* */ +/* */ +/*********************************************************************/ +int mem_test_walk (void) +{ + unsigned long long mask; + volatile unsigned long long *pmem = + (volatile unsigned long long *) CFG_MEMTEST_START; + const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8; + + unsigned int i; + + mask = 0x01; + + printf ("Initial Pass"); + mem_march (pmem, size, 0x0, 0x1, 0, 1); + + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); + + for (i = 0; i < 63; i++) { + printf ("Pass %2d", i + 2); + if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) { + /*printf("mask: 0x%x, pass: %d, ", mask, i); */ + return 1; + } + mask = mask << 1; + printf ("\b\b\b\b\b\b\b"); + } + + printf ("Last Pass"); + if (mem_march (pmem, size, 0, mask, 0, 1) != 0) { + /* printf("mask: 0x%x", mask); */ + return 1; + } + printf ("\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b"); + + return 0; +} + +/*********************************************************************/ +/* NAME: testdram() - calls any enabled memory tests */ +/* */ +/* DESCRIPTION: */ +/* Runs memory tests if the environment test variables are set to */ +/* 'y'. */ +/* */ +/* INPUTS: */ +/* testdramdata - If set to 'y', data test is run. */ +/* testdramaddress - If set to 'y', address test is run. */ +/* testdramwalk - If set to 'y', walking ones test is run */ +/* */ +/* OUTPUTS: */ +/* None */ +/* */ +/* RETURNS: */ +/* 0 - Passed test */ +/* 1 - Failed test */ +/* */ +/* RESTRICTIONS/LIMITATIONS: */ +/* */ +/* */ +/*********************************************************************/ +int testdram (void) +{ + char *s; + int rundata = 0; + int runaddress = 0; + int runwalk = 0; + +#ifdef CFG_DRAM_TEST_DATA + s = getenv ("testdramdata"); + rundata = (s && (*s == 'y')) ? 1 : 0; +#endif +#ifdef CFG_DRAM_TEST_ADDRESS + s = getenv ("testdramaddress"); + runaddress = (s && (*s == 'y')) ? 1 : 0; +#endif +#ifdef CFG_DRAM_TEST_WALK + s = getenv ("testdramwalk"); + runwalk = (s && (*s == 'y')) ? 1 : 0; +#endif + + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("Testing RAM from 0x%08x to 0x%08x ... " + "(don't panic... that will take a moment !!!!)\n", + CFG_MEMTEST_START, CFG_MEMTEST_END); +#ifdef CFG_DRAM_TEST_DATA + if (rundata == 1) { + printf ("Test DATA ... "); + if (mem_test_data () == 1) { + printf ("failed \n"); + return 1; + } else + printf ("ok \n"); + } +#endif +#ifdef CFG_DRAM_TEST_ADDRESS + if (runaddress == 1) { + printf ("Test ADDRESS ... "); + if (mem_test_address () == 1) { + printf ("failed \n"); + return 1; + } else + printf ("ok \n"); + } +#endif +#ifdef CFG_DRAM_TEST_WALK + if (runwalk == 1) { + printf ("Test WALKING ONEs ... "); + if (mem_test_walk () == 1) { + printf ("failed \n"); + return 1; + } else + printf ("ok \n"); + } +#endif + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("passed\n"); + return 0; + +} +#endif /* CFG_DRAM_TEST */ + +/* ronen - the below functions are used by the bootm function */ +/* - we map the base register to fbe00000 (same mapping as in the LSP) */ +/* - we turn off the RX gig dmas - to prevent the dma from overunning */ +/* the kernel data areas. */ +/* - we diable and invalidate the icache and dcache. */ +void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc) +{ + u32 temp; + + temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); + if ((temp & 0xffff) == new_loc >> 16) + return; + + temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & + 0xffff0000) | (new_loc >> 16); + + out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); + + while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE | + new_loc | + (INTERNAL_SPACE_DECODE))))) + != temp); + +} diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c new file mode 100644 index 0000000000..137739bede --- /dev/null +++ b/board/prodrive/p3mx/pci.c @@ -0,0 +1,1025 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* PCI.c - PCI functions */ + + +#include +#ifdef CONFIG_PCI +#include + +#ifdef CONFIG_PCI_PNP +void pciauto_config_init(struct pci_controller *hose); +int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar); +#endif + +#include "../../Marvell/include/pci.h" + +#undef DEBUG +#undef IDE_SET_NATIVE_MODE +static unsigned int local_buses[] = { 0, 0 }; + +static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = { + {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 }, + {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 }, +}; + +#ifdef CONFIG_USE_CPCIDVI +typedef struct { + unsigned int base; + unsigned int init; +} GT_CPCIDVI_ROM_T; + +static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0}; +#endif + +#ifdef DEBUG +static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE }; +static void gt_pci_bus_mode_display (PCI_HOST host) +{ + unsigned int mode; + + + mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4; + switch (mode) { + case 0: + printf ("PCI %d bus mode: Conventional PCI\n", host); + break; + case 1: + printf ("PCI %d bus mode: 66 Mhz PCIX\n", host); + break; + case 2: + printf ("PCI %d bus mode: 100 Mhz PCIX\n", host); + break; + case 3: + printf ("PCI %d bus mode: 133 Mhz PCIX\n", host); + break; + default: + printf ("Unknown BUS %d\n", mode); + } +} +#endif + +static const unsigned int pci_p2p_configuration_reg[] = { + PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION +}; + +static const unsigned int pci_configuration_address[] = { + PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS +}; + +static const unsigned int pci_configuration_data[] = { + PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER, + PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER +}; + +static const unsigned int pci_error_cause_reg[] = { + PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE +}; + +static const unsigned int pci_arbiter_control[] = { + PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL +}; + +static const unsigned int pci_address_space_en[] = { + PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE +}; + +static const unsigned int pci_snoop_control_base_0_low[] = { + PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW +}; +static const unsigned int pci_snoop_control_top_0[] = { + PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0 +}; + +static const unsigned int pci_access_control_base_0_low[] = { + PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW +}; +static const unsigned int pci_access_control_top_0[] = { + PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0 +}; + +static const unsigned int pci_scs_bank_size[2][4] = { + {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE, + PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE}, + {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE, + PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE} +}; + +static const unsigned int pci_p2p_configuration[] = { + PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION +}; + + +/******************************************************************** +* pciWriteConfigReg - Write to a PCI configuration register +* - Make sure the GT is configured as a master before writing +* to another device on the PCI. +* - The function takes care of Big/Little endian conversion. +* +* +* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec +* (or any other PCI device spec) +* pciDevNum: The device number needs to be addressed. +* +* Configuration Address 0xCF8: +* +* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number +* |congif|Reserved| Bus |Device|Function|Register|00| +* |Enable| |Number|Number| Number | Number | | <=field Name +* +*********************************************************************/ +void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset, + unsigned int pciDevNum, unsigned int data) +{ + volatile unsigned int DataForAddrReg; + unsigned int functionNum; + unsigned int busNum = 0; + unsigned int addr; + + if (pciDevNum > 32) /* illegal device Number */ + return; + if (pciDevNum == SELF) { /* configure our configuration space. */ + pciDevNum = + (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & + 0x1f; + busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & + 0xff0000; + } + functionNum = regOffset & 0x00000700; + pciDevNum = pciDevNum << 11; + regOffset = regOffset & 0xfc; + DataForAddrReg = + (regOffset | pciDevNum | functionNum | busNum) | BIT31; + GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); + GT_REG_READ (pci_configuration_address[host], &addr); + if (addr != DataForAddrReg) + return; + GT_REG_WRITE (pci_configuration_data[host], data); +} + +/******************************************************************** +* pciReadConfigReg - Read from a PCI0 configuration register +* - Make sure the GT is configured as a master before reading +* from another device on the PCI. +* - The function takes care of Big/Little endian conversion. +* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI +* spec) +* pciDevNum: The device number needs to be addressed. +* RETURNS: data , if the data == 0xffffffff check the master abort bit in the +* cause register to make sure the data is valid +* +* Configuration Address 0xCF8: +* +* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number +* |congif|Reserved| Bus |Device|Function|Register|00| +* |Enable| |Number|Number| Number | Number | | <=field Name +* +*********************************************************************/ +unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset, + unsigned int pciDevNum) +{ + volatile unsigned int DataForAddrReg; + unsigned int data; + unsigned int functionNum; + unsigned int busNum = 0; + + if (pciDevNum > 32) /* illegal device Number */ + return 0xffffffff; + if (pciDevNum == SELF) { /* configure our configuration space. */ + pciDevNum = + (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & + 0x1f; + busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & + 0xff0000; + } + functionNum = regOffset & 0x00000700; + pciDevNum = pciDevNum << 11; + regOffset = regOffset & 0xfc; + DataForAddrReg = + (regOffset | pciDevNum | functionNum | busNum) | BIT31; + GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); + GT_REG_READ (pci_configuration_address[host], &data); + if (data != DataForAddrReg) + return 0xffffffff; + GT_REG_READ (pci_configuration_data[host], &data); + return data; +} + +/******************************************************************** +* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where +* the agent is placed on another Bus. For more +* information read P2P in the PCI spec. +* +* Inputs: unsigned int regOffset - The register offset as it apears in the +* GT spec (or any other PCI device spec). +* unsigned int pciDevNum - The device number needs to be addressed. +* unsigned int busNum - On which bus does the Target agent connect +* to. +* unsigned int data - data to be written. +* +* Configuration Address 0xCF8: +* +* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number +* |congif|Reserved| Bus |Device|Function|Register|01| +* |Enable| |Number|Number| Number | Number | | <=field Name +* +* The configuration Address is configure as type-I (bits[1:0] = '01') due to +* PCI spec referring to P2P. +* +*********************************************************************/ +void pciOverBridgeWriteConfigReg (PCI_HOST host, + unsigned int regOffset, + unsigned int pciDevNum, + unsigned int busNum, unsigned int data) +{ + unsigned int DataForReg; + unsigned int functionNum; + + functionNum = regOffset & 0x00000700; + pciDevNum = pciDevNum << 11; + regOffset = regOffset & 0xff; + busNum = busNum << 16; + if (pciDevNum == SELF) { /* This board */ + DataForReg = (regOffset | pciDevNum | functionNum) | BIT0; + } else { + DataForReg = (regOffset | pciDevNum | functionNum | busNum) | + BIT31 | BIT0; + } + GT_REG_WRITE (pci_configuration_address[host], DataForReg); + GT_REG_WRITE (pci_configuration_data[host], data); +} + + +/******************************************************************** +* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where +* the agent target locate on another PCI bus. +* - Make sure the GT is configured as a master +* before reading from another device on the PCI. +* - The function takes care of Big/Little endian +* conversion. +* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI +* spec). (configuration register offset.) +* pciDevNum: The device number needs to be addressed. +* busNum: the Bus number where the agent is place. +* RETURNS: data , if the data == 0xffffffff check the master abort bit in the +* cause register to make sure the data is valid +* +* Configuration Address 0xCF8: +* +* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number +* |congif|Reserved| Bus |Device|Function|Register|01| +* |Enable| |Number|Number| Number | Number | | <=field Name +* +*********************************************************************/ +unsigned int pciOverBridgeReadConfigReg (PCI_HOST host, + unsigned int regOffset, + unsigned int pciDevNum, + unsigned int busNum) +{ + unsigned int DataForReg; + unsigned int data; + unsigned int functionNum; + + functionNum = regOffset & 0x00000700; + pciDevNum = pciDevNum << 11; + regOffset = regOffset & 0xff; + busNum = busNum << 16; + if (pciDevNum == SELF) { /* This board */ + DataForReg = (regOffset | pciDevNum | functionNum) | BIT31; + } else { /* agent on another bus */ + + DataForReg = (regOffset | pciDevNum | functionNum | busNum) | + BIT0 | BIT31; + } + GT_REG_WRITE (pci_configuration_address[host], DataForReg); + GT_REG_READ (pci_configuration_data[host], &data); + return data; +} + + +/******************************************************************** +* pciGetRegOffset - Gets the register offset for this region config. +* +* INPUT: Bus, Region - The bus and region we ask for its base address. +* OUTPUT: N/A +* RETURNS: PCI register base address +*********************************************************************/ +static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region) +{ + switch (host) { + case PCI_HOST0: + switch (region) { + case PCI_IO: + return PCI_0I_O_LOW_DECODE_ADDRESS; + case PCI_REGION0: + return PCI_0MEMORY0_LOW_DECODE_ADDRESS; + case PCI_REGION1: + return PCI_0MEMORY1_LOW_DECODE_ADDRESS; + case PCI_REGION2: + return PCI_0MEMORY2_LOW_DECODE_ADDRESS; + case PCI_REGION3: + return PCI_0MEMORY3_LOW_DECODE_ADDRESS; + } + case PCI_HOST1: + switch (region) { + case PCI_IO: + return PCI_1I_O_LOW_DECODE_ADDRESS; + case PCI_REGION0: + return PCI_1MEMORY0_LOW_DECODE_ADDRESS; + case PCI_REGION1: + return PCI_1MEMORY1_LOW_DECODE_ADDRESS; + case PCI_REGION2: + return PCI_1MEMORY2_LOW_DECODE_ADDRESS; + case PCI_REGION3: + return PCI_1MEMORY3_LOW_DECODE_ADDRESS; + } + } + return PCI_0MEMORY0_LOW_DECODE_ADDRESS; +} + +static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region) +{ + switch (host) { + case PCI_HOST0: + switch (region) { + case PCI_IO: + return PCI_0I_O_ADDRESS_REMAP; + case PCI_REGION0: + return PCI_0MEMORY0_ADDRESS_REMAP; + case PCI_REGION1: + return PCI_0MEMORY1_ADDRESS_REMAP; + case PCI_REGION2: + return PCI_0MEMORY2_ADDRESS_REMAP; + case PCI_REGION3: + return PCI_0MEMORY3_ADDRESS_REMAP; + } + case PCI_HOST1: + switch (region) { + case PCI_IO: + return PCI_1I_O_ADDRESS_REMAP; + case PCI_REGION0: + return PCI_1MEMORY0_ADDRESS_REMAP; + case PCI_REGION1: + return PCI_1MEMORY1_ADDRESS_REMAP; + case PCI_REGION2: + return PCI_1MEMORY2_ADDRESS_REMAP; + case PCI_REGION3: + return PCI_1MEMORY3_ADDRESS_REMAP; + } + } + return PCI_0MEMORY0_ADDRESS_REMAP; +} + +/******************************************************************** +* pciGetBaseAddress - Gets the base address of a PCI. +* - If the PCI size is 0 then this base address has no meaning!!! +* +* +* INPUT: Bus, Region - The bus and region we ask for its base address. +* OUTPUT: N/A +* RETURNS: PCI base address. +*********************************************************************/ +unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region) +{ + unsigned int regBase; + unsigned int regEnd; + unsigned int regOffset = pciGetRegOffset (host, region); + + GT_REG_READ (regOffset, ®Base); + GT_REG_READ (regOffset + 8, ®End); + + if (regEnd <= regBase) + return 0xffffffff; /* ERROR !!! */ + + regBase = regBase << 16; + return regBase; +} + +bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase, + unsigned int bankBase, unsigned int bankLength) +{ + unsigned int low = 0xfff; + unsigned int high = 0x0; + unsigned int regOffset = pciGetRegOffset (host, region); + unsigned int remapOffset = pciGetRemapOffset (host, region); + + if (bankLength != 0) { + low = (bankBase >> 16) & 0xffff; + high = ((bankBase + bankLength) >> 16) - 1; + } + + GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */ + GT_REG_WRITE (regOffset + 8, high); + + if (bankLength != 0) { /* must do AFTER writing maps */ + GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only. + dont support upper 32 + in this driver */ + } + return true; +} + +unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region) +{ + unsigned int low; + unsigned int regOffset = pciGetRegOffset (host, region); + + GT_REG_READ (regOffset, &low); + return (low & 0xffff) << 16; +} + +unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region) +{ + unsigned int low, high; + unsigned int regOffset = pciGetRegOffset (host, region); + + GT_REG_READ (regOffset, &low); + GT_REG_READ (regOffset + 8, &high); + return ((high & 0xffff) + 1) << 16; +} + + +/* ronen - 7/Dec/03*/ +/******************************************************************** +* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS. +* Inputs: one of the PCI BAR +*********************************************************************/ +void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) +{ + RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); +} + +void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) +{ + SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); +} + +/******************************************************************** +* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave. +* +* Inputs: base and size of PCI SCS +*********************************************************************/ +void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank, + unsigned int pciDramBase, unsigned int pciDramSize) +{ + /*ronen different function for 3rd bank. */ + unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8; + + pciDramBase = pciDramBase & 0xfffff000; + pciDramBase = pciDramBase | (pciReadConfigReg (host, + PCI_SCS_0_BASE_ADDRESS + + offset, + SELF) & 0x00000fff); + pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF, + pciDramBase); + if (pciDramSize == 0) + pciDramSize++; + GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1); + gtPciEnableInternalBAR (host, bank); +} + +/******************************************************************** +* pciSetRegionFeatures - This function modifys one of the 8 regions with +* feature bits given as an input. +* - Be advised to check the spec before modifying them. +* Inputs: PCI_PROTECT_REGION region - one of the eight regions. +* unsigned int features - See file: pci.h there are defintion for those +* region features. +* unsigned int baseAddress - The region base Address. +* unsigned int topAddress - The region top Address. +* Returns: false if one of the parameters is erroneous true otherwise. +*********************************************************************/ +bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region, + unsigned int features, unsigned int baseAddress, + unsigned int regionLength) +{ + unsigned int accessLow; + unsigned int accessHigh; + unsigned int accessTop = baseAddress + regionLength; + + if (regionLength == 0) { /* close the region. */ + pciDisableAccessRegion (host, region); + return true; + } + /* base Address is store is bits [11:0] */ + accessLow = (baseAddress & 0xfff00000) >> 20; + /* All the features are update according to the defines in pci.h (to be on + the safe side we disable bits: [11:0] */ + accessLow = accessLow | (features & 0xfffff000); + /* write to the Low Access Region register */ + GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, + accessLow); + + accessHigh = (accessTop & 0xfff00000) >> 20; + + /* write to the High Access Region register */ + GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, + accessHigh - 1); + return true; +} + +/******************************************************************** +* pciDisableAccessRegion - Disable The given Region by writing MAX size +* to its low Address and MIN size to its high Address. +* +* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled. +* Returns: N/A. +*********************************************************************/ +void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region) +{ + /* writing back the registers default values. */ + GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, + 0x01001fff); + GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0); +} + +/******************************************************************** +* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism. +* +* Inputs: N/A +* Returns: true. +*********************************************************************/ +bool pciArbiterEnable (PCI_HOST host) +{ + unsigned int regData; + + GT_REG_READ (pci_arbiter_control[host], ®Data); + GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31); + return true; +} + +/******************************************************************** +* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism. +* +* Inputs: N/A +* Returns: true +*********************************************************************/ +bool pciArbiterDisable (PCI_HOST host) +{ + unsigned int regData; + + GT_REG_READ (pci_arbiter_control[host], ®Data); + GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff); + return true; +} + +/******************************************************************** +* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low) +* +* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent. +* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent. +* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent. +* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent. +* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent. +* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent. +* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent. +* Returns: true +*********************************************************************/ +bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent, + PCI_AGENT_PRIO externalAgent0, + PCI_AGENT_PRIO externalAgent1, + PCI_AGENT_PRIO externalAgent2, + PCI_AGENT_PRIO externalAgent3, + PCI_AGENT_PRIO externalAgent4, + PCI_AGENT_PRIO externalAgent5) +{ + unsigned int regData; + unsigned int writeData; + + GT_REG_READ (pci_arbiter_control[host], ®Data); + writeData = (internalAgent << 7) + (externalAgent0 << 8) + + (externalAgent1 << 9) + (externalAgent2 << 10) + + (externalAgent3 << 11) + (externalAgent4 << 12) + + (externalAgent5 << 13); + regData = (regData & 0xffffc07f) | writeData; + GT_REG_WRITE (pci_arbiter_control[host], regData & regData); + return true; +} + +/******************************************************************** +* pciParkingDisable - Park on last option disable, with this function you can +* disable the park on last mechanism for each agent. +* disabling this option for all agents results parking +* on the internal master. +* +* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent. +* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent. +* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent. +* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent. +* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent. +* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent. +* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent. +* Returns: true +*********************************************************************/ +bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent, + PCI_AGENT_PARK externalAgent0, + PCI_AGENT_PARK externalAgent1, + PCI_AGENT_PARK externalAgent2, + PCI_AGENT_PARK externalAgent3, + PCI_AGENT_PARK externalAgent4, + PCI_AGENT_PARK externalAgent5) +{ + unsigned int regData; + unsigned int writeData; + + GT_REG_READ (pci_arbiter_control[host], ®Data); + writeData = (internalAgent << 14) + (externalAgent0 << 15) + + (externalAgent1 << 16) + (externalAgent2 << 17) + + (externalAgent3 << 18) + (externalAgent4 << 19) + + (externalAgent5 << 20); + regData = (regData & ~(0x7f << 14)) | writeData; + GT_REG_WRITE (pci_arbiter_control[host], regData); + return true; +} + +/******************************************************************** +* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to +* respond to grant assertion within a window specified in +* the input value: 'brokenValue'. +* +* Inputs: unsigned char brokenValue - A value which limits the Master to hold the +* grant without asserting frame. +* Returns: Error for illegal broken value otherwise true. +*********************************************************************/ +bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue) +{ + unsigned int data; + unsigned int regData; + + if (brokenValue > 0xf) + return false; /* brokenValue must be 4 bit */ + data = brokenValue << 3; + GT_REG_READ (pci_arbiter_control[host], ®Data); + regData = (regData & 0xffffff87) | data; + GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1); + return true; +} + +/******************************************************************** +* pciDisableBrokenAgentDetection - This function disable the Broken agent +* Detection mechanism. +* NOTE: This operation may cause a dead lock on the +* pci0 arbitration. +* +* Inputs: N/A +* Returns: true. +*********************************************************************/ +bool pciDisableBrokenAgentDetection (PCI_HOST host) +{ + unsigned int regData; + + GT_REG_READ (pci_arbiter_control[host], ®Data); + regData = regData & 0xfffffffd; + GT_REG_WRITE (pci_arbiter_control[host], regData); + return true; +} + +/******************************************************************** +* pciP2PConfig - This function set the PCI_n P2P configurate. +* For more information on the P2P read PCI spec. +* +* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower +* Boundry. +* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper +* Boundry. +* unsigned int busNum - The CPI bus number to which the PCI interface +* is connected. +* unsigned int devNum - The PCI interface's device number. +* +* Returns: true. +*********************************************************************/ +bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow, + unsigned int SecondBusHigh, + unsigned int busNum, unsigned int devNum) +{ + unsigned int regData; + + regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) | + ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24); + GT_REG_WRITE (pci_p2p_configuration[host], regData); + return true; +} + +/******************************************************************** +* pciSetRegionSnoopMode - This function modifys one of the 4 regions which +* supports Cache Coherency in the PCI_n interface. +* Inputs: region - One of the four regions. +* snoopType - There is four optional Types: +* 1. No Snoop. +* 2. Snoop to WT region. +* 3. Snoop to WB region. +* 4. Snoop & Invalidate to WB region. +* baseAddress - Base Address of this region. +* regionLength - Region length. +* Returns: false if one of the parameters is wrong otherwise return true. +*********************************************************************/ +bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region, + PCI_SNOOP_TYPE snoopType, + unsigned int baseAddress, + unsigned int regionLength) +{ + unsigned int snoopXbaseAddress; + unsigned int snoopXtopAddress; + unsigned int data; + unsigned int snoopHigh = baseAddress + regionLength; + + if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB)) + return false; + snoopXbaseAddress = + pci_snoop_control_base_0_low[host] + 0x10 * region; + snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region; + if (regionLength == 0) { /* closing the region */ + GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff); + GT_REG_WRITE (snoopXtopAddress, 0); + return true; + } + baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */ + data = (baseAddress >> 20) | snoopType << 12; + GT_REG_WRITE (snoopXbaseAddress, data); + snoopHigh = (snoopHigh & 0xfff00000) >> 20; + GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1); + return true; +} + +static int gt_read_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + int bus = PCI_BUS (dev); + + if ((bus == local_buses[0]) || (bus == local_buses[1])) { + *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset, + PCI_DEV (dev)); + } else { + *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose-> + cfg_addr, offset, + PCI_DEV (dev), bus); + } + + return 0; +} + +static int gt_write_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + int bus = PCI_BUS (dev); + + if ((bus == local_buses[0]) || (bus == local_buses[1])) { + pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset, + PCI_DEV (dev), value); + } else { + pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr, + offset, PCI_DEV (dev), bus, + value); + } + return 0; +} + + +static void gt_setup_ide (struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *entry) +{ + static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 }; + u32 bar_response, bar_value; + int bar; + + for (bar = 0; bar < 6; bar++) { + /*ronen different function for 3rd bank. */ + unsigned int offset = + (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8; + + pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, + 0x0); + pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, + &bar_response); + + pciauto_region_allocate (bar_response & + PCI_BASE_ADDRESS_SPACE_IO ? hose-> + pci_io : hose->pci_mem, ide_bar[bar], + &bar_value); + + pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4, + bar_value); + } +} + +#ifdef CONFIG_USE_CPCIDVI +static void gt_setup_cpcidvi (struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *entry) +{ + u32 bar_value, pci_response; + + pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response); + pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff); + pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response); + pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value); + pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00)); + pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0); + pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value); + pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01); + gt_cpcidvi_rom.base = bar_value & 0xffffff00; + gt_cpcidvi_rom.init = 1; +} + +unsigned char gt_cpcidvi_in8(unsigned int offset) +{ + unsigned char data; + + if (gt_cpcidvi_rom.init == 0) { + return(0); + } + data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base); + return(data); +} + +void gt_cpcidvi_out8(unsigned int offset, unsigned char data) +{ + unsigned int off; + + if (gt_cpcidvi_rom.init == 0) { + return; + } + off = data; + off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base; + in8(off); + return; +} +#endif + +/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */ +/* and is curently not called *. */ +#if 0 +static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char pin, irq; + + pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin); + + if (pin == 1) { /* only allow INT A */ + irq = pci_irq_swizzle[(PCI_HOST) hose-> + cfg_addr][PCI_DEV (dev)]; + if (irq) + pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq); + } +} +#endif + +struct pci_config_table gt_config_table[] = { +#ifdef CONFIG_USE_CPCIDVI + {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA, + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi}, +#endif + {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide}, + {} +}; + +struct pci_controller pci0_hose = { +/* fixup_irq: gt_fixup_irq, */ + config_table:gt_config_table, +}; + +struct pci_controller pci1_hose = { +/* fixup_irq: gt_fixup_irq, */ + config_table:gt_config_table, +}; + +void pci_init_board (void) +{ + unsigned int command; +#ifdef CONFIG_PCI_PNP + unsigned int bar; +#endif +#ifdef DEBUG + gt_pci_bus_mode_display (PCI_HOST0); +#endif +#ifdef CONFIG_USE_CPCIDVI + gt_cpcidvi_rom.init = 0; + gt_cpcidvi_rom.base = 0; +#endif + + pci0_hose.config_table = gt_config_table; + pci1_hose.config_table = gt_config_table; + +#ifdef CONFIG_USE_CPCIDVI + gt_config_table[0].config_device = gt_setup_cpcidvi; +#endif + gt_config_table[1].config_device = gt_setup_ide; + + pci0_hose.first_busno = 0; + pci0_hose.last_busno = 0xff; + local_buses[0] = pci0_hose.first_busno; + + /* PCI memory space */ + pci_set_region (pci0_hose.regions + 0, + CFG_PCI0_0_MEM_SPACE, + CFG_PCI0_0_MEM_SPACE, + CFG_PCI0_MEM_SIZE, PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region (pci0_hose.regions + 1, + CFG_PCI0_IO_SPACE_PCI, + CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO); + + pci_set_ops (&pci0_hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + gt_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + gt_write_config_dword); + pci0_hose.region_count = 2; + + pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0; + + pci_register_hose (&pci0_hose); + pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */ + pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1); + command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); + command |= PCI_COMMAND_MASTER; + pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); + command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); + command |= PCI_COMMAND_MEMORY; + pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); + +#ifdef CONFIG_PCI_PNP + pciauto_config_init(&pci0_hose); + pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar); +#endif +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno); + +#ifdef DEBUG + gt_pci_bus_mode_display (PCI_HOST1); +#endif + pci1_hose.first_busno = pci0_hose.last_busno + 1; + pci1_hose.last_busno = 0xff; + pci1_hose.current_busno = pci1_hose.first_busno; + local_buses[1] = pci1_hose.first_busno; + + /* PCI memory space */ + pci_set_region (pci1_hose.regions + 0, + CFG_PCI1_0_MEM_SPACE, + CFG_PCI1_0_MEM_SPACE, + CFG_PCI1_MEM_SIZE, PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region (pci1_hose.regions + 1, + CFG_PCI1_IO_SPACE_PCI, + CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + + pci_set_ops (&pci1_hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + gt_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + gt_write_config_dword); + + pci1_hose.region_count = 2; + + pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1; + + pci_register_hose (&pci1_hose); + + pciArbiterEnable (PCI_HOST1); + pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1); + + command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); + command |= PCI_COMMAND_MASTER; + pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); + +#ifdef CONFIG_PCI_PNP + pciauto_config_init(&pci1_hose); + pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar); +#endif + pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno); + + command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); + command |= PCI_COMMAND_MEMORY; + pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); + +} +#endif /* of CONFIG_PCI */ diff --git a/board/prodrive/p3mx/ppc_error_no.h b/board/prodrive/p3mx/ppc_error_no.h new file mode 100644 index 0000000000..53687c86bb --- /dev/null +++ b/board/prodrive/p3mx/ppc_error_no.h @@ -0,0 +1,164 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus + */ +#ifndef _MV_PPC_ERRNO_H +#define _MV_PPC_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ +#define EDEADLOCK 58 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +/* Should never be seen by user programs */ +#define ERESTARTSYS 512 +#define ERESTARTNOINTR 513 +#define ERESTARTNOHAND 514 /* restart if no handler.. */ +#define ENOIOCTLCMD 515 /* No ioctl command */ + +#define _LAST_ERRNO 515 + +#endif diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c new file mode 100644 index 0000000000..b4556debff --- /dev/null +++ b/board/prodrive/p3mx/sdram_init.c @@ -0,0 +1,433 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************* + * adaption for the Marvell DB64460 Board + * Ingo Assmus (ingo.assmus@keymile.com) + *************************************************************************/ + +/* sdram_init.c - automatic memory sizing */ + +#include +#include <74xx_7xx.h> +#include "../../Marvell/include/memory.h" +#include "../../Marvell/include/pci.h" +#include "../../Marvell/include/mv_gen_reg.h" +#include + +#include "eth.h" +#include "mpsc.h" +#include "../../Marvell/common/i2c.h" +#include "64460.h" +#include "mv_regs.h" + +DECLARE_GLOBAL_DATA_PTR; + +#undef DEBUG +#define MAP_PCI + +#ifdef DEBUG +#define DP(x) x +#else +#define DP(x) +#endif + +int set_dfcdlInit (void); /* setup delay line of Mv64460 */ +int mvDmaIsChannelActive (int); +int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong); +int mvDmaTransfer (int, ulong, ulong, ulong, ulong); + +#define D_CACHE_FLUSH_LINE(addr, offset) \ + { \ + __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ + } + +int memory_map_bank (unsigned int bankNo, + unsigned int bankBase, unsigned int bankLength) +{ +#ifdef MAP_PCI + PCI_HOST host; +#endif + +#ifdef DEBUG + if (bankLength > 0) + printf ("mapping bank %d at %08x - %08x\n", + bankNo, bankBase, bankBase + bankLength - 1); + else + printf ("unmapping bank %d\n", bankNo); +#endif + + memoryMapBank (bankNo, bankBase, bankLength); + +#ifdef MAP_PCI + for (host = PCI_HOST0; host <= PCI_HOST1; host++) { + const int features = + PREFETCH_ENABLE | + DELAYED_READ_ENABLE | + AGGRESSIVE_PREFETCH | + READ_LINE_AGGRESSIVE_PREFETCH | + READ_MULTI_AGGRESSIVE_PREFETCH | + MAX_BURST_4 | PCI_NO_SWAP; + + pciMapMemoryBank (host, bankNo, bankBase, bankLength); + + pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase, + bankLength); + + pciSetRegionFeatures (host, bankNo, features, bankBase, + bankLength); + } +#endif + + return 0; +} + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ +long int dram_size (long int *base, long int maxsize) +{ + volatile long int *addr, *b = base; + long int cnt, val, save1, save2; + +#define STARTVAL (1<<20) /* start test at 1M */ + for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long); + cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + save1 = *addr; /* save contents of addr */ + save2 = *b; /* save contents of base */ + + *addr = cnt; /* write cnt to addr */ + *b = 0; /* put null at base */ + + /* check at base address */ + if ((*b) != 0) { + *addr = save1; /* restore *addr */ + *b = save2; /* restore *b */ + return (0); + } + val = *addr; /* read *addr */ + val = *addr; /* read *addr */ + + *addr = save1; + *b = save2; + + if (val != cnt) { + DP (printf + ("Found %08x at Address %08x (failure)\n", + (unsigned int) val, (unsigned int) addr)); + /* fix boundary condition.. STARTVAL means zero */ + if (cnt == STARTVAL / sizeof (long)) + cnt = 0; + return (cnt * sizeof (long)); + } + } + + return maxsize; +} + +#define SDRAM_NORMAL 0x0 +#define SDRAM_PRECHARGE_ALL 0x1 +#define SDRAM_REFRESH_ALL 0x2 +#define SDRAM_MODE_REG_SETUP 0x3 +#define SDRAM_XTEN_MODE_REG_SETUP 0x4 +#define SDRAM_NOP 0x5 +#define SDRAM_SELF_REFRESH 0x7 + +long int initdram (int board_type) +{ + int tmp; + int start; + ulong size; + ulong memSpaceAttr; + ulong dest; + + /* first disable all banks */ + memory_map_bank(0, 0, 0); + memory_map_bank(1, 0, 0); + memory_map_bank(2, 0, 0); + memory_map_bank(3, 0, 0); + + /* calibrate delay lines */ + set_dfcdlInit(); + + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* SDRAM controller configuration */ +#ifdef CONFIG_MV64460_ECC + GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */ +#else + GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */ +#endif + GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */ + GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */ + GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */ + GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */ + GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */ + GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */ + + /* SDRAM drive strength */ + GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */ + GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */ + GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */ + GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */ + + /* setup SDRAM device registers */ + + /* precharge all */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* enable DLL */ + GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* reset DLL */ + GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* precharge all */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* wait for 2 auto refresh commands */ + udelay(20); + + /* un-reset DLL */ + GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ + do { + tmp = GTREGREAD(MV64460_SDRAM_OPERATION); + } while(tmp != 0x0); + + /* wait 200 cycles */ + udelay(2); /* FIXME make this dynamic for the system clock */ + + /* SDRAM init done */ + memory_map_bank(0, CFG_SDRAM_BASE, (256 << 20)); +#ifdef CFG_SDRAM1_BASE + memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20)); +#endif + + /* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4 + */ + tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */ + GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2); + + start = (0 << 20); +#ifdef CONFIG_P3M750 + size = (512 << 20); +#elif defined (CONFIG_P3M7448) + size = (128 << 20); +#endif + +#ifdef CONFIG_MV64460_ECC + memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8; + mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size); + for (dest = start; dest < start + size; dest += _8M) { + mvDmaTransfer (0, start, dest, _8M, + BIT8 /*DMA_DTL_128BYTES */ | + BIT3 /*DMA_HOLD_SOURCE_ADDR */ | + BIT11 /*DMA_BLOCK_TRANSFER_MODE */ ); + while (mvDmaIsChannelActive (0)); + } +#endif + + return (size); +} + +void board_add_ram_info(int use_default) +{ + u32 val; + + puts(" (CL="); + switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) { + case 0x2: + puts("2"); + break; + case 0x3: + puts("3"); + break; + case 0x5: + puts("1.5"); + break; + case 0x6: + puts("2.5"); + break; + } + + val = GTREGREAD(MV64460_SDRAM_CONFIG); + + puts(", ECC "); + if (val & 0x00001000) + puts("enabled)"); + else + puts("not enabled)"); +} + +/* + * mvDmaIsChannelActive - Check if IDMA channel is active + * + * channel = IDMA channel number from 0 to 7 + */ +int mvDmaIsChannelActive (int channel) +{ + ulong data; + + data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel); + if (data & BIT14) /* activity status */ + return 1; + + return 0; +} + +/* + * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding + * map. + * + * memSpace = IDMA memory window number from 0 to 7 + * trg_if = Target interface: + * 0x0 DRAM + * 0x1 Device Bus + * 0x2 Integrated SDRAM (or CPU bus 60x only) + * 0x3 PCI0 + * 0x4 PCI1 + * attr = IDMA attributes (see MV datasheet) + * base_addr = Sets up memory window for transfers + * + */ +int mvDmaSetMemorySpace (ulong memSpace, + ulong trg_if, + ulong attr, ulong base_addr, ulong size) +{ + ulong temp; + + /* The base address must be aligned to the size. */ + if (base_addr % size != 0) + return 0; + + if (size >= 0x10000) { /* 64K */ + size &= 0xffff0000; + base_addr = (base_addr & 0xffff0000); + /* Set the new attributes */ + GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8, + (base_addr | trg_if | attr)); + GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8), + (size - 1) & 0xffff0000); + temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG); + GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG, + (temp & ~(BIT0 << memSpace))); + return 1; + } + + return 0; +} + +/* + * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4 + * DMA channels. + * + * channel = IDMA channel number from 0 to 3 + * destAddr = Destination address + * sourceAddr = Source address + * size = Size in bytes + * command = See MV datasheet + * + */ +int mvDmaTransfer (int channel, ulong sourceAddr, + ulong destAddr, ulong size, ulong command) +{ + ulong engOffReg = 0; /* Engine Offset Register */ + + if (size > 0xffff) + command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */ + command = command | ((command >> 6) & 0x7); + engOffReg = channel * 4; + GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size); + GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr); + GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr); + command = command | + BIT12 | /* DMA_CHANNEL_ENABLE */ + BIT9; /* DMA_NON_CHAIN_MODE */ + /* Activate DMA channel By writting to mvDmaControlRegister */ + GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command); + return 1; +} + +/**************************************************************************************** + * SDRAM INIT * + * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * + * This procedure fits only the Atlantis * + * * + ***************************************************************************************/ + +/**************************************************************************************** + * DFCDL initialize MV643xx Design Considerations * + * * + ***************************************************************************************/ +int set_dfcdlInit (void) +{ + int i; + + /* Values from MV64460 User Manual */ + unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083, + 0x000000c4, 0x00000105, 0x00000146, 0x00000187, + 0x000001c8, 0x00000209, 0x0000024a, 0x0000028b, + 0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f, + 0x000003d0, 0x00000411, 0x00000452, 0x00000493, + 0x000004d4, 0x00000515, 0x00000556, 0x00000597, + 0x000005d8, 0x00000619, 0x0000065a, 0x0000069b, + 0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f, + 0x000007e0, 0x00000821, 0x00000862, 0x000008a3, + 0x000008e4, 0x00000925, 0x00000966, 0x000009a7, + 0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab, + 0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf, + 0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3, + 0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7, + 0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb, + 0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf }; + + for (i = 0; i < 64; i++) + GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]); + GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ + + return (0); +} diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c new file mode 100644 index 0000000000..ba32ac12ac --- /dev/null +++ b/board/prodrive/p3mx/serial.c @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * modified for marvell db64360 eval board by + * Ingo Assmus + * + * modified for cpci750 board by + * Reinhard Arlt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * serial.c - serial support for esd cpci750 board + */ + +/* supports the MPSC */ + +#include +#include +#include "../../Marvell/include/memory.h" +#include "serial.h" + +#include "mpsc.h" + +DECLARE_GLOBAL_DATA_PTR; + +int serial_init (void) +{ + mpsc_init (gd->baudrate); + + return (0); +} + +void serial_putc (const char c) +{ + if (c == '\n') + mpsc_putchar ('\r'); + + mpsc_putchar (c); +} + +int serial_getc (void) +{ + return mpsc_getchar (); +} + +int serial_tstc (void) +{ + return mpsc_test_char (); +} + +void serial_setbrg (void) +{ + galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); +} + + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +void kgdb_serial_init (void) +{ +} + +void putDebugChar (int c) +{ + serial_putc (c); +} + +void putDebugStr (const char *str) +{ + serial_puts (str); +} + +int getDebugChar (void) +{ + return serial_getc (); +} + +void kgdb_interruptible (int yes) +{ + return; +} +#endif /* CFG_CMD_KGDB */ diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h new file mode 100644 index 0000000000..c7fc8c162d --- /dev/null +++ b/board/prodrive/p3mx/serial.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * modified for marvell db64360 eval board by + * Ingo Assmus + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* serial.h - mostly useful for DUART serial_init in serial.c */ + +#ifndef __SERIAL_H__ +#define __SERIAL_H__ + +#if 0 + +#define B230400 1 +#define B115200 2 +#define B57600 4 +#define B38400 82 +#define B19200 163 +#define B9600 24 +#define B4800 651 +#define B2400 1302 +#define B1200 2604 +#define B600 5208 +#define B300 10417 +#define B150 20833 +#define B110 28409 +#define BDEFAULT B115200 + + /* this stuff is important to initialize + the DUART channels */ + +#define Scale 0x01L /* distance between port addresses */ +#define COM1 0x000003f8 /* Keyboard */ +#define COM2 0x000002f8 /* Host */ + + +/* Port Definitions relative to base COM port addresses */ +#define DataIn (0x00*Scale) /* data input port */ +#define DataOut (0x00*Scale) /* data output port */ +#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ +#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ +#define Ier (0x01*Scale) /* interrupt enable register */ +#define Iir (0x02*Scale) /* interrupt identification register */ +#define Lcr (0x03*Scale) /* line control register */ +#define Mcr (0x04*Scale) /* modem control register */ +#define Lsr (0x05*Scale) /* line status register */ +#define Msr (0x06*Scale) /* modem status register */ + +/* Bit Definitions for above ports */ +#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ +#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ + +#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ +#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ +#define McrDflt (McrRts|McrDtr) + +#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ + /* b6: transmitter empty */ +#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ + +#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ +#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ +#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ + +#define IerRda 0xf /* b0: Enable received data available interrupt */ + +#endif + +#endif /* __SERIAL_H__ */ diff --git a/board/prodrive/p3mx/u-boot.lds b/board/prodrive/p3mx/u-boot.lds new file mode 100644 index 0000000000..d89eb6cff2 --- /dev/null +++ b/board/prodrive/p3mx/u-boot.lds @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * u-boot.lds - linker script for U-Boot on the Galileo Eval Board. + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/74xx_7xx/start.o (.text) + +/* store the environment in a seperate sector in the boot flash */ +/* . = env_offset; */ +/* common/environment.o(.text) */ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index ca45e17edb..d98831cb48 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -101,6 +101,10 @@ get_cpu_type(void) type = CPU_7457; break; + case 0x8004: + type = CPU_7448; + break; + default: break; } @@ -152,6 +156,10 @@ int checkcpu (void) str = "MPC7410"; break; + case CPU_7448: + str = "MPC7448"; + break; + case CPU_7450: str = "MPC7450"; break; diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c index 93f180f267..e02a4cc21c 100644 --- a/cpu/74xx_7xx/cpu_init.c +++ b/cpu/74xx_7xx/cpu_init.c @@ -43,6 +43,7 @@ cpu_init_f (void) case CPU_7450: case CPU_7455: case CPU_7457: + case CPU_7448: /* enable the timebase bit in HID0 */ set_hid0(get_hid0() | 0x4000000); break; diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c index 2dc510746d..d1800ede05 100644 --- a/cpu/74xx_7xx/speed.c +++ b/cpu/74xx_7xx/speed.c @@ -91,6 +91,7 @@ int get_clocks (void) /* calculate the clock frequency based upon the CPU type */ switch (get_cpu_type()) { + case CPU_7448: case CPU_7455: case CPU_7457: /* diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S index 1fc0fe6bc1..11430388f5 100644 --- a/cpu/74xx_7xx/start.S +++ b/cpu/74xx_7xx/start.S @@ -44,7 +44,8 @@ #if !defined(CONFIG_DB64360) && \ !defined(CONFIG_DB64460) && \ - !defined(CONFIG_CPCI750) + !defined(CONFIG_CPCI750) && \ + !defined(CONFIG_P3Mx) #include #endif @@ -270,7 +271,7 @@ in_flash: * gt-regs BAT can be reused after board_init_f calls * board_early_init_f (EVB only). */ -#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) +#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx) /* enable address translation */ bl enable_addr_trans sync @@ -757,7 +758,8 @@ in_ram: defined(CONFIG_DB64360) || \ defined(CONFIG_DB64460) || \ defined(CONFIG_CPCI750) || \ - defined(CONFIG_PPMC7XX) + defined(CONFIG_PPMC7XX) || \ + defined(CONFIG_P3Mx) mr r4, r9 /* Use RAM copy of the global data */ #endif bl after_reloc diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h index a6287982a6..33e396a066 100644 --- a/include/74xx_7xx.h +++ b/include/74xx_7xx.h @@ -111,6 +111,7 @@ typedef enum __cpu_t { CPU_750CX, CPU_750FX, CPU_750GX, CPU_7400, CPU_7410, + CPU_7448, CPU_7450, CPU_7455, CPU_7457, CPU_UNKNOWN} cpu_t; diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h new file mode 100644 index 0000000000..262e9d6acf --- /dev/null +++ b/include/configs/p3mx.h @@ -0,0 +1,450 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Based on original work by + * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards + * + * The defines: + * CONFIG_P3M750 or + * CONFIG_P3M7448 + * are written into include/config.h by the "make xxx_config" command + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_P3Mx /* used for both board versions */ + +#if defined (CONFIG_P3M750) +#define CONFIG_750FX /* 750GL/GX/FX */ +#define CFG_BOARD_NAME "P3M750" +#define CFG_BUS_HZ 100000000 +#define CFG_BUS_CLK CFG_BUS_HZ +#define CFG_TCLK 100000000 +#elif defined (CONFIG_P3M7448) +#define CONFIG_74xx +#define CFG_BOARD_NAME "P3M7448" +#define CFG_BUS_HZ 133333333 +#define CFG_BUS_CLK CFG_BUS_HZ +#define CFG_TCLK 133333333 +#endif +#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ + +/* which initialization functions to call for this board */ +#define CFG_BOARD_ASM_INIT 1 +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 +#ifdef CONFIG_P3M750 +#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#if defined (CONFIG_P3M750) +#define CFG_FLASH_BASE 0xff800000 /* start of flash banks */ +#define CFG_BOOT_SIZE _8M /* boot flash */ +#elif defined (CONFIG_P3M7448) +#define CFG_FLASH_BASE 0xff000000 /* start of flash banks */ +#define CFG_BOOT_SIZE _16M /* boot flash */ +#endif +#define CFG_BOOT_SPACE CFG_FLASH_BASE /* BOOT_CS0 flash 0 */ +#define CFG_MONITOR_BASE 0xfff00000 +#define CFG_RESET_ADDRESS 0xfff00100 +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MISC_REGION_BASE 0xf0000000 + +#define CFG_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ +#define CFG_GT_REGS 0xf1000000 /* GT Registers are mapped here */ +#define CFG_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ + /* + * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * To an unused memory region. The stack will remain in cache until RAM + * is initialized +*/ +#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x42000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_MPSC /* MV64460 Serial */ +#define CONFIG_MPSC_PORT 0 +#define CONFIG_BAUDRATE 115200 /* console baudrate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/*----------------------------------------------------------------------- + * Ethernet + *----------------------------------------------------------------------*/ +/* Change the default ethernet port, use this define (options: 0, 1, 2) */ +#define CFG_ETH_PORT ETH_0 +#define CONFIG_NET_MULTI +#define MV_ETH_DEVS 2 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#if defined (CONFIG_P3M750) +#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device)*/ +#elif defined (CONFIG_P3M7448) +#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */ +#endif +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_MV64460_ECC + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CFG_I2C_SPEED 100000 /* I2C speed default */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ + +/* PCI MEMORY MAP section */ +#define CFG_PCI0_MEM_BASE 0x80000000 +#define CFG_PCI0_MEM_SIZE _128M +#define CFG_PCI1_MEM_BASE 0x88000000 +#define CFG_PCI1_MEM_SIZE _128M + +#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) +#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) + +/* PCI I/O MAP section */ +#define CFG_PCI0_IO_BASE 0xfa000000 +#define CFG_PCI0_IO_SIZE _16M +#define CFG_PCI1_IO_BASE 0xfb000000 +#define CFG_PCI1_IO_SIZE _16M + +#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE) +#define CFG_PCI0_IO_SPACE_PCI 0x00000000 +#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) +#define CFG_PCI1_IO_SPACE_PCI 0x00000000 + +#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) + +#define CFG_PCI_IDSEL 0x30 + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "u-boot=p3mx/u-boot/u-boot.bin\0" \ + "load=tftp 100000 ${u-boot}\0" \ + "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \ + "cp.b 100000 fff00000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "serverip=11.0.0.152\0" + +#if defined (CONFIG_P3M750) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "hostname=p3m750\0" \ + "bootfile=/tftpboot/p3mx/vxWorks.st\0" \ + "kernel_addr=fc000000\0" \ + "ramdisk_addr=fc180000\0" \ + "vxfile=p3m750/vxWorks\0" \ + "vxuser=ddg\0" \ + "vxpass=ddg\0" \ + "vxtarget=target\0" \ + "vxflags=0x8\0" \ + "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \ + "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \ + "f=${vxflags}\0" +#elif defined (CONFIG_P3M7448) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "hostname=p3m7448\0" +#endif + +#if defined (CONFIG_P3M750) +#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx" +#elif defined (CONFIG_P3M7448) +#define CONFIG_BOOTCOMMAND " " +#endif + +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DIAG | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_PCI | \ + CFG_CMD_CACHE | \ + CFG_CMD_SDRAM) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x08000000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * Marvell MV64460 config settings + *----------------------------------------------------------------------*/ +/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */ +#if defined (CONFIG_P3M750) +#define CFG_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ +#elif defined (CONFIG_P3M7448) +#define CFG_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ +#endif + +/* + * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered) + * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered) + * MPP[2] NC + * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered) + * MPP[4] PCI Monarch# GPIO IN Connected to P12 + * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered) + * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14 + * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14 + * MPP[8] Reserved Do not use + * MPP[9] Reserved Do not use + * MPP[10] Reserved Do not use + * MPP[11] Reserved Do not use + * MPP[12] Phy 0 Interrupt Int IN + * MPP[13] Phy 1 Interrupt Int IN + * MPP[14] NC + * MPP[15] NC + * MPP[16] PCI Interrupt C Int IN Connected to P11 + * MPP[17] PCI Interrupt D Int IN Connected to P11 + * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24] + * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic + * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog + * MPP[21] NC + * MPP[22] GP LED Green GPIO OUT + * MPP[23] GP LED Red GPIO OUT + * MPP[24] Watchdog NMI# Int OUT + * MPP[25] NC + * MPP[26] NC + * MPP[27] PCI Interrupt A Int IN Connected to P11 + * MPP[28] NC + * MPP[29] PCI Interrupt B Int IN Connected to P11 + * MPP[30] Module reset GPIO OUT Board reset + * MPP[31] PCI EReady GPIO IN Connected to P12 + */ +#define CFG_MPP_CONTROL_0 0x00303022 +#define CFG_MPP_CONTROL_1 0x00000000 +#define CFG_MPP_CONTROL_2 0x00004000 +#define CFG_MPP_CONTROL_3 0x00000004 +#define CFG_GPP_LEVEL_CONTROL 0x280730D0 + +/*---------------------------------------------------------------------- + * Initial BAT mappings + */ + +/* NOTES: + * 1) GUARDED and WRITE_THRU not allowed in IBATS + * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT + */ +/* SDRAM */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) +#define CFG_DBAT0U CFG_IBAT0U + +/* init ram */ +#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* PCI0, PCI1 in one BAT */ +#define CFG_IBAT2L BATL_NO_ACCESS +#define CFG_IBAT2U CFG_DBAT2U +#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* GT regs, bootrom, all the devices, PCI I/O */ +#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) +#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) +#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U CFG_IBAT4U + +/* set rest out of range for Linux !!!!!!!!!!! */ + +/* IBAT5 and DBAT5 */ +#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT5U CFG_IBAT5U + +/* IBAT6 and DBAT6 */ +#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U CFG_IBAT6U + +/* IBAT7 and DBAT7 */ +#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT7U CFG_IBAT7U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * L2CR setup -- make sure this is right for your board! + * look in include/mpc74xx.h for the defines used here + */ +#define CFG_L2 + +#if defined (CONFIG_750CX) || defined (CONFIG_750FX) +#define L2_INIT 0 +#else +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ + L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) +#endif + +#define L2_ENABLE (L2_INIT | L2CR_L2E) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/net/eth.c b/net/eth.c index e8ac251a4f..1e6a1c97ab 100644 --- a/net/eth.c +++ b/net/eth.c @@ -142,13 +142,10 @@ int eth_initialize(bd_t *bis) miiphy_init(); #endif -#ifdef CONFIG_DB64360 +#if defined(CONFIG_DB64360) || defined(CONFIG_CPCI750) mv6436x_eth_initialize(bis); #endif -#ifdef CONFIG_CPCI750 - mv6436x_eth_initialize(bis); -#endif -#ifdef CONFIG_DB64460 +#if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx) mv6446x_eth_initialize(bis); #endif #if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000) From 726e90aacf0b1ecb0e7055be574622fbe3e450ba Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 29 Nov 2006 16:23:42 +0100 Subject: [PATCH 64/72] [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, not the XLB frequency. This patch depends on the previous patches for MPC52xx device tree support Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut --- cpu/mpc5xxx/cpu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 20e6735de4..813aa7935d 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -112,21 +112,20 @@ void ft_cpu_setup(void *blob, bd_t *bd) { u32 *p; - ulong clock; int len; - clock = bd->bi_busfreq; + /* Core XLB bus frequency */ p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); if (p != NULL) - *p = cpu_to_be32(clock); + *p = cpu_to_be32(bd->bi_busfreq); + /* SOC peripherals use the IPB bus frequency */ p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); if (p != NULL) - *p = cpu_to_be32(clock); + *p = cpu_to_be32(bd->bi_ipbfreq); p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); - } #endif From 8d9a8610b8256331132227e9e6585c6bd5742787 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 30 Nov 2006 01:54:07 +0100 Subject: [PATCH 65/72] Code cleanup. Update CHANGELOG. --- CHANGELOG | 165 ++++++++ board/prodrive/p3mx/mv_eth.c | 668 ++++++++++++++----------------- board/prodrive/p3mx/sdram_init.c | 35 +- 3 files changed, 480 insertions(+), 388 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 4c9a7445e4..305cee8fd3 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,85 @@ +commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba +Author: Grant Likely +Date: Wed Nov 29 16:23:42 2006 +0100 + + [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals + + The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, + not the XLB frequency. + + This patch depends on the previous patches for MPC52xx device tree support + + Signed-off-by: Grant Likely + Signed-off-by: Sylvain Munaut + +commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 +Author: Stefan Roese +Date: Wed Nov 29 15:42:37 2006 +0100 + + [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards + + This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) + and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are + quite similar and share the same board directory "prodrive/p3mx" + and the same config file "p3mx.h". + + Signed-off-by: Stefan Roese + +commit 1bdd46832aeb569f5e04b1f20f64318525b6525a +Author: Stefan Roese +Date: Wed Nov 29 12:53:15 2006 +0100 + + [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command + + In the bootvx command the load address was only read from the env + variable "loadaddr" and not optionally passed as paramter as described + in the help. This is fixed with this patch. The behaviour is now the + same as in the bootelf command. + + Signed-off-by: Stefan Roese + +commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 +Author: Stefan Roese +Date: Wed Nov 29 12:03:57 2006 +0100 + + [PATCH] include/ppc440.h minor error affecting interrupts + + Fixed include/ppc440.c for UIC address Bug + + Corrects bug affecting the addresses for the universal interrupt + controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. + + Signed-off-by: Jeff Mann + Signed-off-by: Stefan Roese + +commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 +Author: Stefan Roese +Date: Tue Nov 28 17:55:49 2006 +0100 + + [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. + + This patch adds the code and configuration necessary to boot with an + arch/powerpc Linux kernel. + + Signed-off-by: Grant Likely + Acked-by: Jon Loeliger + +commit e732faec95a83cb468b4850ae807c8301dde8f6a +Author: Stefan Roese +Date: Tue Nov 28 16:09:24 2006 +0100 + + [PATCH] PPC4xx: 440SP Rev. C detection added + + Signed-off-by: Stefan Roese + +commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 +Author: Stefan Roese +Date: Tue Nov 28 11:04:45 2006 +0100 + + [PATCH] nand: Fix patch merge problem + + Signed-off-by: Stefan Roese + commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa Author: Wolfgang Denk Date: Mon Nov 27 22:53:53 2006 +0100 @@ -67,6 +149,46 @@ Date: Mon Nov 27 15:32:42 2006 +0100 Minor code cleanup. Update CHANGELOG. +commit 1729b92cde575476684bffe819d0b7791b57bff2 +Author: Stefan Roese +Date: Mon Nov 27 14:52:04 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code (now for real) + + Signed-off-by: Stefan Roese + +commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 +Author: Stefan Roese +Date: Mon Nov 27 14:49:51 2006 +0100 + + [PATCH] alpr: remove unused board specific flash driver + + Signed-off-by: Stefan Roese + +commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 +Author: Stefan Roese +Date: Mon Nov 27 14:48:41 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code + + Signed-off-by: Stefan Roese + +commit ec0c2ec725aec9524a177a77ce75559e644a931a +Author: Stefan Roese +Date: Mon Nov 27 14:46:06 2006 +0100 + + [PATCH] Remove testing 4xx enet PHY setup + + Signed-off-by: Stefan Roese + +commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 +Author: Stefan Roese +Date: Mon Nov 27 14:12:17 2006 +0100 + + [PATCH] Update Prodrive ALPR board support (440GX) + + Signed-off-by: Stefan Roese + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk Date: Thu Nov 23 22:58:58 2006 +0100 @@ -641,6 +763,34 @@ Date: Tue Oct 10 17:02:22 2006 -0500 Fix whitespace and 80-col issues. +commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 +Author: Stefan Roese +Date: Sat Oct 7 11:36:51 2006 +0200 + + CFG_NAND_QUIET_TEST added to not warn upon missing NAND device + Patch by Stefan Roese, 07 Oct 2006 + +commit 5bc528fa4da751d472397b308137238a6465afd2 +Author: Stefan Roese +Date: Sat Oct 7 11:35:25 2006 +0200 + + Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 + +commit 77d5034847d328753b80c46b83f960a14a26f40e +Author: Stefan Roese +Date: Sat Oct 7 11:33:03 2006 +0200 + + Remove compile warnings in fpga code + Patch by Stefan Roese, 07 Oct 2006 + +commit f3443867e90d2979a7dd1c65b0d537777e1f9850 +Author: Stefan Roese +Date: Sat Oct 7 11:30:52 2006 +0200 + + Add CONFIG_BOARD_RESET to configure board specific reset function + Patch by Stefan Roese, 07 Oct 2006 + commit f55df18187e7a45cb73fec4370d12135e6691ae1 Author: John Traill Date: Fri Sep 29 08:23:12 2006 +0100 @@ -873,6 +1023,21 @@ Date: Wed Aug 16 10:54:09 2006 -0500 Signed-off-by: Matthew McClintock +commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 +Author: Stefan Roese +Date: Tue Aug 15 14:22:35 2006 +0200 + + Add initial support for the ALPR board from Prodrive + NAND needs some additional testing + Patch by Heiko Schocher, 15 Aug 2006 + +commit f0ff4692ff3372dec55074a8eb444943ab095abb +Author: Stefan Roese +Date: Tue Aug 15 14:15:51 2006 +0200 + + Add FPGA Altera Cyclone 2 support + Patch by Heiko Schocher, 15 Aug 2006 + commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b Author: Jon Loeliger Date: Mon Aug 14 15:33:38 2006 -0500 diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c index 1127673648..8203b3cbf1 100644 --- a/board/prodrive/p3mx/mv_eth.c +++ b/board/prodrive/p3mx/mv_eth.c @@ -15,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -46,33 +46,28 @@ #endif /* PHY DFCDL Registers */ -#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 -#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 -#define ETH_PHY_DFCDL_ADDR_REG 0x2110 -#define ETH_PHY_DFCDL_DATA0_REG 0x2114 +#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 +#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 +#define ETH_PHY_DFCDL_ADDR_REG 0x2110 +#define ETH_PHY_DFCDL_DATA0_REG 0x2114 -#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ -#define PHY_UPDATE_TIMEOUT 10000 +#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ +#define PHY_UPDATE_TIMEOUT 10000 #undef MV64460_CHECKSUM_OFFLOAD /************************************************************************* -************************************************************************** -************************************************************************** -* The first part is the high level driver of the gigE ethernet ports. * -************************************************************************** -************************************************************************** +* The first part is the high level driver of the gigE ethernet ports. * *************************************************************************/ /* Definition for configuring driver */ /* #define UPDATE_STATS_BY_SOFTWARE */ #undef MV64460_RX_QUEUE_FILL_ON_TASK - /* Constants */ #define MAGIC_ETH_RUNNING 8031971 -#define MV64460_INTERNAL_SRAM_SIZE _256K +#define MV64460_INTERNAL_SRAM_SIZE _256K #define EXTRA_BYTES 32 -#define WRAP ETH_HLEN + 2 + 4 + 16 +#define WRAP ETH_HLEN + 2 + 4 + 16 #define BUFFER_MTU dev->mtu + WRAP #define INT_CAUSE_UNMASK_ALL 0x0007ffff #define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff @@ -111,7 +106,7 @@ int mv_miiphy_write(char *devname, unsigned char phy_addr, int phy_setup_aneg (char *devname, unsigned char addr); -#ifndef UPDATE_STATS_BY_SOFTWARE +#ifndef UPDATE_STATS_BY_SOFTWARE static void mv64460_eth_print_stat (struct eth_device *dev); #endif /* Processes a received packet */ @@ -141,8 +136,10 @@ void print_globals (struct eth_device *dev) printf ("GT Internal Base Address: %08x\n", INTERNAL_REG_BASE_ADDR); - printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); - printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); + printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); + printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> p_rx_buffer_base[0], @@ -154,8 +151,6 @@ void print_globals (struct eth_device *dev) } #endif - - /********************************************************************** * mv64460_eth_print_phy_status * @@ -221,84 +216,37 @@ void db64460_eth_disable (struct eth_device *dev) mv64460_eth_stop (dev); } - #define DFCDL(write,read) ((write << 6) | read) -unsigned int ethDfcdls[] = { DFCDL(0,0), - DFCDL(1,1), - DFCDL(2,2), - DFCDL(3,3), - DFCDL(4,4), - DFCDL(5,5), - DFCDL(6,6), - DFCDL(7,7), - DFCDL(8,8), - DFCDL(9,9), - DFCDL(10,10), - DFCDL(11,11), - DFCDL(12,12), - DFCDL(13,13), - DFCDL(14,14), - DFCDL(15,15), - DFCDL(16,16), - DFCDL(17,17), - DFCDL(18,18), - DFCDL(19,19), - DFCDL(20,20), - DFCDL(21,21), - DFCDL(22,22), - DFCDL(23,23), - DFCDL(24,24), - DFCDL(25,25), - DFCDL(26,26), - DFCDL(27,27), - DFCDL(28,28), - DFCDL(29,29), - DFCDL(30,30), - DFCDL(31,31), - DFCDL(32,32), - DFCDL(33,33), - DFCDL(34,34), - DFCDL(35,35), - DFCDL(36,36), - DFCDL(37,37), - DFCDL(38,38), - DFCDL(39,39), - DFCDL(40,40), - DFCDL(41,41), - DFCDL(42,42), - DFCDL(43,43), - DFCDL(44,44), - DFCDL(45,45), - DFCDL(46,46), - DFCDL(47,47), - DFCDL(48,48), - DFCDL(49,49), - DFCDL(50,50), - DFCDL(51,51), - DFCDL(52,52), - DFCDL(53,53), - DFCDL(54,54), - DFCDL(55,55), - DFCDL(56,56), - DFCDL(57,57), - DFCDL(58,58), - DFCDL(59,59), - DFCDL(60,60), - DFCDL(61,61), - DFCDL(62,62), - DFCDL(63,63) }; +unsigned int ethDfcdls[] = { + DFCDL(0,0), DFCDL(1,1), DFCDL(2,2), DFCDL(3,3), + DFCDL(4,4), DFCDL(5,5), DFCDL(6,6), DFCDL(7,7), + DFCDL(8,8), DFCDL(9,9), DFCDL(10,10), DFCDL(11,11), + DFCDL(12,12), DFCDL(13,13), DFCDL(14,14), DFCDL(15,15), + DFCDL(16,16), DFCDL(17,17), DFCDL(18,18), DFCDL(19,19), + DFCDL(20,20), DFCDL(21,21), DFCDL(22,22), DFCDL(23,23), + DFCDL(24,24), DFCDL(25,25), DFCDL(26,26), DFCDL(27,27), + DFCDL(28,28), DFCDL(29,29), DFCDL(30,30), DFCDL(31,31), + DFCDL(32,32), DFCDL(33,33), DFCDL(34,34), DFCDL(35,35), + DFCDL(36,36), DFCDL(37,37), DFCDL(38,38), DFCDL(39,39), + DFCDL(40,40), DFCDL(41,41), DFCDL(42,42), DFCDL(43,43), + DFCDL(44,44), DFCDL(45,45), DFCDL(46,46), DFCDL(47,47), + DFCDL(48,48), DFCDL(49,49), DFCDL(50,50), DFCDL(51,51), + DFCDL(52,52), DFCDL(53,53), DFCDL(54,54), DFCDL(55,55), + DFCDL(56,56), DFCDL(57,57), DFCDL(58,58), DFCDL(59,59), + DFCDL(60,60), DFCDL(61,61), DFCDL(62,62), DFCDL(63,63), +}; -void mv_eth_phy_init(void) +void mv_eth_phy_init (void) { - int i; + int i; - MV_REG_WRITE(ETH_PHY_DFCDL_ADDR_REG, 0); + MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0); - for (i = 0 ; i < 64; i++) { - MV_REG_WRITE(ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); - } + for (i = 0; i < 64; i++) { + MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); + } - MV_REG_WRITE(ETH_PHY_DFCDL_CONFIG0_REG,0x300000); + MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000); } void mv6446x_eth_initialize (bd_t * bis) @@ -309,9 +257,9 @@ void mv6446x_eth_initialize (bd_t * bis) int devnum, x, temp; char *s, *e, buf[64]; -/* P3M750 only - * Set RGMII clock drives strength - */ + /* P3M750 only + * Set RGMII clock drives strength + */ temp = MV_REG_READ(0x20A0); temp |= 0x04000080; MV_REG_WRITE(0x20A0, temp); @@ -338,15 +286,12 @@ void mv6446x_eth_initialize (bd_t * bis) case 0: s = "ethaddr"; break; - case 1: s = "eth1addr"; break; - case 2: s = "eth2addr"; break; - default: /* this should never happen */ printf ("%s: Invalid device number %d\n", __FUNCTION__, devnum); @@ -440,15 +385,12 @@ void mv6446x_eth_initialize (bd_t * bis) case 0: s = "ethaddr"; break; - case 1: s = "eth1addr"; break; - case 2: s = "eth2addr"; break; - default: /* this should never happen */ printf ("%s: Invalid device number %d\n", __FUNCTION__, devnum); @@ -538,13 +480,11 @@ static int mv64460_eth_real_open (struct eth_device *dev) see ./net/eth.c eth_set_enetaddr() */ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; + port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; port_num = port_private->port_num; /* Stop RX Queues */ - MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), - 0x0000ff00); + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00); /* Clear the ethernet port interrupts */ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); @@ -685,7 +625,6 @@ static int mv64460_eth_real_open (struct eth_device *dev) return 1; } - static int mv64460_eth_free_tx_rings (struct eth_device *dev) { unsigned int queue; @@ -739,7 +678,6 @@ static int mv64460_eth_free_rx_rings (struct eth_device *dev) (struct mv64460_eth_priv *) ethernet_private->port_private; port_num = port_private->port_num; - /* Stop RX Queues */ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00); @@ -823,7 +761,7 @@ static int mv64460_eth_real_stop (struct eth_device *dev) MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH, BIT0 << port_num); /* Print Network statistics */ -#ifndef UPDATE_STATS_BY_SOFTWARE +#ifndef UPDATE_STATS_BY_SOFTWARE /* * Print statistics (only if ethernet is running), * then zero all the stats fields in memory @@ -838,7 +776,6 @@ static int mv64460_eth_real_stop (struct eth_device *dev) return 0; } - /********************************************************************** * mv64460_eth_start_xmit * @@ -846,7 +783,7 @@ static int mv64460_eth_real_stop (struct eth_device *dev) * required port. * * Input : skb - a pointer to socket buffer - * dev - a pointer to the required port + * dev - a pointer to the required port * * Output : zero upon success **********************************************************************/ @@ -882,7 +819,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, printf ("ETH Queue is full. \n"); if (status == ETH_QUEUE_LAST_RESOURCE) printf ("ETH Queue: using last available resource. \n"); - goto error; + return 1; } /* Update statistics and start of transmittion time */ @@ -918,10 +855,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, } } while (release_result == ETH_OK); - return 0; /* success */ - - error: - return 1; /* Failed - higher layers will free the skb */ + return 0; /* success */ } /********************************************************************** @@ -931,7 +865,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, * queues toward kernel core or FastRoute them to another interface. * * Input : dev - a pointer to the required interface - * max - maximum number to receive (0 means unlimted) + * max - maximum number to receive (0 means unlimted) * * Output : number of served packets **********************************************************************/ @@ -1054,7 +988,6 @@ static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev) return port_private->stats; } - /********************************************************************** * mv64460_eth_update_stat * @@ -1136,7 +1069,7 @@ static void mv64460_eth_update_stat (struct eth_device *dev) /* detailed tx errors */ } -#ifndef UPDATE_STATS_BY_SOFTWARE +#ifndef UPDATE_STATS_BY_SOFTWARE /********************************************************************** * mv64460_eth_print_stat * @@ -1198,7 +1131,7 @@ bool db64460_eth_start (struct eth_device *dev) /************************************************************************* ************************************************************************** ************************************************************************** -* The second part is the low level driver of the gigE ethernet ports. * +* The second part is the low level driver of the gigE ethernet ports. * ************************************************************************** ************************************************************************** *************************************************************************/ @@ -1214,7 +1147,7 @@ bool db64460_eth_start (struct eth_device *dev) * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * You should have received a copy of the GNU General Public License @@ -1227,7 +1160,7 @@ bool db64460_eth_start (struct eth_device *dev) * Marvell's Gigabit Ethernet controller low level driver * * DESCRIPTION: - * This file introduce low level API to Marvell's Gigabit Ethernet + * This file introduce low level API to Marvell's Gigabit Ethernet * controller. This Gigabit Ethernet Controller driver API controls * 1) Operations (i.e. port init, start, reset etc'). * 2) Data flow (i.e. port send, receive etc'). @@ -1339,23 +1272,23 @@ bool db64460_eth_start (struct eth_device *dev) * * EXTERNAL INTERFACE * - * Prior to calling the initialization routine eth_port_init() the user + * Prior to calling the initialization routine eth_port_init() the user * must set the following fields under ETH_PORT_INFO struct: - * port_num User Ethernet port number. - * port_phy_addr User PHY address of Ethernet port. - * port_mac_addr[6] User defined port MAC address. - * port_config User port configuration value. - * port_config_extend User port config extend value. - * port_sdma_config User port SDMA config value. - * port_serial_control User port serial control value. - * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. - * *port_private User scratch pad for user specific data structures. + * port_num User Ethernet port number. + * port_phy_addr User PHY address of Ethernet port. + * port_mac_addr[6] User defined port MAC address. + * port_config User port configuration value. + * port_config_extend User port config extend value. + * port_sdma_config User port SDMA config value. + * port_serial_control User port serial control value. + * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. + * *port_private User scratch pad for user specific data structures. * - * This driver introduce a set of default values: - * PORT_CONFIG_VALUE Default port configuration value - * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value - * PORT_SDMA_CONFIG_VALUE Default sdma control value - * PORT_SERIAL_CONTROL_VALUE Default port serial control value + * This driver introduce a set of default values: + * PORT_CONFIG_VALUE Default port configuration value + * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value + * PORT_SDMA_CONFIG_VALUE Default sdma control value + * PORT_SERIAL_CONTROL_VALUE Default port serial control value * * This driver data flow is done using the PKT_INFO struct which is * a unified struct for Rx and Tx operations: @@ -1374,7 +1307,7 @@ bool db64460_eth_start (struct eth_device *dev) * * This macro applies assembly code to flush and invalidate cache * line. - * address - address base. + * address - address base. * address offset - address offset * * @@ -1522,25 +1455,25 @@ u32 mv_get_internal_sram_base (void) * eth_port_init - Initialize the Ethernet port driver * * DESCRIPTION: -* This function prepares the ethernet port to start its activity: -* 1) Completes the ethernet port driver struct initialization toward port -* start routine. -* 2) Resets the device to a quiescent state in case of warm reboot. -* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. -* 4) Clean MAC tables. The reset status of those tables is unknown. -* 5) Set PHY address. -* Note: Call this routine prior to eth_port_start routine and after setting -* user values in the user fields of Ethernet port control struct (i.e. -* port_phy_addr). +* This function prepares the ethernet port to start its activity: +* 1) Completes the ethernet port driver struct initialization toward port +* start routine. +* 2) Resets the device to a quiescent state in case of warm reboot. +* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. +* 4) Clean MAC tables. The reset status of those tables is unknown. +* 5) Set PHY address. +* Note: Call this routine prior to eth_port_start routine and after setting +* user values in the user fields of Ethernet port control struct (i.e. +* port_phy_addr). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: -* See description. +* See description. * * RETURN: -* None. +* None. * *******************************************************************************/ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) @@ -1574,7 +1507,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) /* Set access parameters for DRAM bank 0 */ win_param.win = ETH_WIN0; /* Use Ethernet window 0 */ - win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */ #ifndef CONFIG_NOT_COHERENT_CACHE win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; @@ -1582,7 +1515,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) win_param.high_addr = 0; /* Get bank base */ win_param.base_addr = mv_get_dram_bank_base_addr (BANK0); - win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ + win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ if (win_param.size == 0) win_param.enable = 0; else @@ -1602,7 +1535,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) win_param.high_addr = 0; /* Get bank base */ win_param.base_addr = mv_get_dram_bank_base_addr (BANK1); - win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ + win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ if (win_param.size == 0) win_param.enable = 0; else @@ -1622,7 +1555,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) win_param.high_addr = 0; /* Get bank base */ win_param.base_addr = mv_get_dram_bank_base_addr (BANK2); - win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ + win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ if (win_param.size == 0) win_param.enable = 0; else @@ -1642,7 +1575,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) win_param.high_addr = 0; /* Get bank base */ win_param.base_addr = mv_get_dram_bank_base_addr (BANK3); - win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ + win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ if (win_param.size == 0) win_param.enable = 0; else @@ -1678,30 +1611,30 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) * eth_port_start - Start the Ethernet port activity. * * DESCRIPTION: -* This routine prepares the Ethernet port for Rx and Tx activity: -* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that -* has been initialized a descriptor's ring (using ether_init_tx_desc_ring -* for Tx and ether_init_rx_desc_ring for Rx) -* 2. Initialize and enable the Ethernet configuration port by writing to -* the port's configuration and command registers. -* 3. Initialize and enable the SDMA by writing to the SDMA's +* This routine prepares the Ethernet port for Rx and Tx activity: +* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that +* has been initialized a descriptor's ring (using ether_init_tx_desc_ring +* for Tx and ether_init_rx_desc_ring for Rx) +* 2. Initialize and enable the Ethernet configuration port by writing to +* the port's configuration and command registers. +* 3. Initialize and enable the SDMA by writing to the SDMA's * configuration and command registers. -* After completing these steps, the ethernet port SDMA can starts to -* perform Rx and Tx activities. +* After completing these steps, the ethernet port SDMA can starts to +* perform Rx and Tx activities. * -* Note: Each Rx and Tx queue descriptor's list must be initialized prior -* to calling this function (use ether_init_tx_desc_ring for Tx queues and -* ether_init_rx_desc_ring for Rx queues). +* Note: Each Rx and Tx queue descriptor's list must be initialized prior +* to calling this function (use ether_init_tx_desc_ring for Tx queues and +* ether_init_rx_desc_ring for Rx queues). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: -* Ethernet port is ready to receive and transmit. +* Ethernet port is ready to receive and transmit. * * RETURN: -* false if the port PHY is not up. -* true otherwise. +* false if the port PHY is not up. +* true otherwise. * *******************************************************************************/ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) @@ -1712,7 +1645,6 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) unsigned int phy_reg_data; ETH_PORT eth_port_num = p_eth_port_ctrl->port_num; - /* Assignment of Tx CTRP of given queue */ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { CURR_TFD_GET (p_tx_curr_desc, queue); @@ -1782,13 +1714,13 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) * This function Set the port Ethernet MAC address. * * INPUT: -* ETH_PORT eth_port_num Port number. -* char * p_addr Address to be set -* ETH_QUEUE queue Rx queue number for this MAC address. +* ETH_PORT eth_port_num Port number. +* char * p_addr Address to be set +* ETH_QUEUE queue Rx queue number for this MAC address. * * OUTPUT: * Set MAC address low and high registers. also calls eth_port_uc_addr() -* To set the unicast table with the proper information. +* To set the unicast table with the proper information. * * RETURN: * N/A. @@ -1822,10 +1754,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num, * parameters. * * INPUT: -* ETH_PORT eth_port_num Port number. +* ETH_PORT eth_port_num Port number. * unsigned char uc_nibble Unicast MAC Address last nibble. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * This function add/removes MAC addresses from the port unicast address @@ -1904,10 +1836,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num, * In this case, the function calculates the CRC-8bit value and calls * eth_port_omc_addr() routine to set the Other Multicast Table. * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char *p_addr Unicast MAC Address. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char *p_addr Unicast MAC Address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -1928,13 +1860,12 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num, int crc[8]; int i; - if ((p_addr[0] == 0x01) && (p_addr[1] == 0x00) && - (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) + (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) { eth_port_smc_addr (eth_port_num, p_addr[5], queue, option); - else { + } else { /* Calculate CRC-8 out of the given address */ mac_h = (p_addr[0] << 8) | (p_addr[1]); mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) | @@ -1945,7 +1876,6 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num, for (i = 32; i < 48; i++) mac_array[i] = (mac_h >> (i - 32)) & 0x1; - crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ mac_array[39] ^ mac_array[35] ^ mac_array[34] ^ mac_array[31] ^ mac_array[30] ^ mac_array[28] ^ @@ -2038,10 +1968,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num, * according to the argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -2060,7 +1990,7 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num, unsigned int reg_offset; /* Locate the SMC table entry */ - tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ + tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ reg_offset = mc_byte % 4; /* Entry offset within the above register */ queue &= 0x7; @@ -2102,10 +2032,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num, * CRC-8 argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -2158,17 +2088,17 @@ static bool eth_port_omc_addr (ETH_PORT eth_port_num, * eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables * * DESCRIPTION: -* Go through all the DA filter tables (Unicast, Special Multicast & Other -* Multicast) and set each entry to 0. +* Go through all the DA filter tables (Unicast, Special Multicast & Other +* Multicast) and set each entry to 0. * * INPUT: * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: -* Multicast and Unicast packets are rejected. +* Multicast and Unicast packets are rejected. * * RETURN: -* None. +* None. * *******************************************************************************/ static void eth_port_init_mac_tables (ETH_PORT eth_port_num) @@ -2192,17 +2122,17 @@ static void eth_port_init_mac_tables (ETH_PORT eth_port_num) * eth_clear_mib_counters - Clear all MIB counters * * DESCRIPTION: -* This function clears all MIB counters of a specific ethernet port. -* A read from the MIB counter will reset the counter. +* This function clears all MIB counters of a specific ethernet port. +* A read from the MIB counter will reset the counter. * * INPUT: * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: -* After reading all MIB counters, the counters resets. +* After reading all MIB counters, the counters resets. * * RETURN: -* MIB counter value. +* MIB counter value. * *******************************************************************************/ static void eth_clear_mib_counters (ETH_PORT eth_port_num) @@ -2223,21 +2153,21 @@ static void eth_clear_mib_counters (ETH_PORT eth_port_num) * eth_read_mib_counter - Read a MIB counter * * DESCRIPTION: -* This function reads a MIB counter of a specific ethernet port. -* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the -* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH -* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and -* ETH_MIB_GOOD_OCTETS_SENT_HIGH +* This function reads a MIB counter of a specific ethernet port. +* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the +* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH +* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and +* ETH_MIB_GOOD_OCTETS_SENT_HIGH * * INPUT: * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. -* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). +* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). * * OUTPUT: -* After reading the MIB counter, the counter resets. +* After reading the MIB counter, the counter resets. * * RETURN: -* MIB counter value. +* MIB counter value. * *******************************************************************************/ unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, @@ -2251,17 +2181,17 @@ unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, * ethernet_phy_set - Set the ethernet port PHY address. * * DESCRIPTION: -* This routine set the ethernet port PHY address according to given -* parameter. +* This routine set the ethernet port PHY address according to given +* parameter. * * INPUT: -* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: -* Set PHY Address Register with given PHY address parameter. +* Set PHY Address Register with given PHY address parameter. * * RETURN: -* None. +* None. * *******************************************************************************/ static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) @@ -2282,16 +2212,16 @@ static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) * ethernet_phy_get - Get the ethernet port PHY address. * * DESCRIPTION: - * This routine returns the given ethernet port PHY address. + * This routine returns the given ethernet port PHY address. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: - * None. + * None. * * RETURN: - * PHY address. + * PHY address. * *******************************************************************************/ static int ethernet_phy_get (ETH_PORT eth_port_num) @@ -2333,17 +2263,17 @@ int phy_setup_aneg (char *devname, unsigned char addr) * ethernet_phy_reset - Reset Ethernet port PHY. * * DESCRIPTION: - * This routine utilize the SMI interface to reset the ethernet port PHY. - * The routine waits until the link is up again or link up is timeout. + * This routine utilize the SMI interface to reset the ethernet port PHY. + * The routine waits until the link is up again or link up is timeout. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: - * The ethernet port PHY renew its link. + * The ethernet port PHY renew its link. * * RETURN: - * None. + * None. * *******************************************************************************/ static bool ethernet_phy_reset (ETH_PORT eth_port_num) @@ -2352,12 +2282,12 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num) unsigned int phy_reg_data; eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data); - phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ + phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data); /* Reset the PHY */ eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data); - phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ + phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data); /* Poll on the PHY LINK */ @@ -2376,18 +2306,18 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num) * eth_port_reset - Reset Ethernet port * * DESCRIPTION: - * This routine resets the chip by aborting any SDMA engine activity and - * clearing the MIB counters. The Receiver and the Transmit unit are in - * idle state after this command is performed and the port is disabled. + * This routine resets the chip by aborting any SDMA engine activity and + * clearing the MIB counters. The Receiver and the Transmit unit are in + * idle state after this command is performed and the port is disabled. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: - * Channel activity is halted. + * Channel activity is halted. * * RETURN: - * None. + * None. * *******************************************************************************/ static void eth_port_reset (ETH_PORT eth_port_num) @@ -2455,19 +2385,19 @@ static void eth_port_reset (ETH_PORT eth_port_num) * ethernet_set_config_reg - Set specified bits in configuration register. * * DESCRIPTION: - * This function sets specified bits in the given ethernet - * configuration register. + * This function sets specified bits in the given ethernet + * configuration register. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int value 32 bit value. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. * * OUTPUT: - * The set bits in the value parameter are set in the configuration - * register. + * The set bits in the value parameter are set in the configuration + * register. * * RETURN: - * None. + * None. * *******************************************************************************/ static void ethernet_set_config_reg (ETH_PORT eth_port_num, @@ -2490,19 +2420,19 @@ static void ethernet_set_config_reg (ETH_PORT eth_port_num, * ethernet_reset_config_reg - Reset specified bits in configuration register. * * DESCRIPTION: - * This function resets specified bits in the given Ethernet - * configuration register. + * This function resets specified bits in the given Ethernet + * configuration register. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int value 32 bit value. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. * * OUTPUT: - * The set bits in the value parameter are reset in the configuration - * register. + * The set bits in the value parameter are reset in the configuration + * register. * * RETURN: - * None. + * None. * *******************************************************************************/ static void ethernet_reset_config_reg (ETH_PORT eth_port_num, @@ -2525,17 +2455,17 @@ static void ethernet_reset_config_reg (ETH_PORT eth_port_num, * ethernet_get_config_reg - Get the port configuration register * * DESCRIPTION: - * This function returns the configuration register value of the given - * ethernet port. + * This function returns the configuration register value of the given + * ethernet port. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. * * OUTPUT: - * None. + * None. * * RETURN: - * Port configuration register value. + * Port configuration register value. * *******************************************************************************/ static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) @@ -2553,20 +2483,20 @@ static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) * eth_port_read_smi_reg - Read PHY registers * * DESCRIPTION: - * This routine utilize the SMI interface to interact with the PHY in - * order to perform PHY register read. + * This routine utilize the SMI interface to interact with the PHY in + * order to perform PHY register read. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int phy_reg PHY register address offset. - * unsigned int *value Register value buffer. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int *value Register value buffer. * * OUTPUT: - * Write the value of a specified PHY register into given buffer. + * Write the value of a specified PHY register into given buffer. * * RETURN: - * false if the PHY is busy or read data is not in valid state. - * true otherwise. + * false if the PHY is busy or read data is not in valid state. + * true otherwise. * *******************************************************************************/ static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, @@ -2601,7 +2531,7 @@ static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, return false; } } - while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ /* Wait for the data to update in the SMI register */ #define PHY_UPDATE_TIMEOUT 10000 @@ -2642,7 +2572,7 @@ int mv_miiphy_read(char *devname, unsigned char phy_addr, return false; } } - while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ /* Wait for the data to update in the SMI register */ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); @@ -2658,20 +2588,20 @@ int mv_miiphy_read(char *devname, unsigned char phy_addr, * eth_port_write_smi_reg - Write to PHY registers * * DESCRIPTION: - * This routine utilize the SMI interface to interact with the PHY in - * order to perform writes to PHY registers. + * This routine utilize the SMI interface to interact with the PHY in + * order to perform writes to PHY registers. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int phy_reg PHY register address offset. - * unsigned int value Register value. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int value Register value. * * OUTPUT: - * Write the given value to the specified PHY register. + * Write the given value to the specified PHY register. * * RETURN: - * false if the PHY is busy. - * true otherwise. + * false if the PHY is busy. + * true otherwise. * *******************************************************************************/ static bool eth_port_write_smi_reg (ETH_PORT eth_port_num, @@ -2725,18 +2655,18 @@ int mv_miiphy_write(char *devname, unsigned char phy_addr, * eth_set_access_control - Config address decode parameters for Ethernet unit * * DESCRIPTION: - * This function configures the address decode parameters for the Gigabit - * Ethernet Controller according the given parameters struct. + * This function configures the address decode parameters for the Gigabit + * Ethernet Controller according the given parameters struct. * * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * ETH_WIN_PARAM *param Address decode parameter struct. + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_WIN_PARAM *param Address decode parameter struct. * * OUTPUT: - * An access window is opened using the given access parameters. + * An access window is opened using the given access parameters. * * RETURN: - * None. + * None. * *******************************************************************************/ static void eth_set_access_control (ETH_PORT eth_port_num, @@ -2779,30 +2709,30 @@ static void eth_set_access_control (ETH_PORT eth_port_num, * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. * * DESCRIPTION: - * This function prepares a Rx chained list of descriptors and packet - * buffers in a form of a ring. The routine must be called after port - * initialization routine and before port start routine. - * The Ethernet SDMA engine uses CPU bus addresses to access the various - * devices in the system (i.e. DRAM). This function uses the ethernet - * struct 'virtual to physical' routine (set by the user) to set the ring - * with physical addresses. + * This function prepares a Rx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * int rx_desc_num Number of Rx descriptors - * int rx_buff_size Size of Rx buffer - * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. - * unsigned int rx_buff_base_addr Rx buffer memory area base addr. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * int rx_desc_num Number of Rx descriptors + * int rx_buff_size Size of Rx buffer + * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. + * unsigned int rx_buff_base_addr Rx buffer memory area base addr. * * OUTPUT: - * The routine updates the Ethernet port control struct with information - * regarding the Rx descriptors and buffers. + * The routine updates the Ethernet port control struct with information + * regarding the Rx descriptors and buffers. * * RETURN: - * false if the given descriptors memory area is not aligned according to - * Ethernet SDMA specifications. - * true otherwise. + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. * *******************************************************************************/ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, @@ -2817,7 +2747,6 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, unsigned int buffer_addr; int ix; /* a counter */ - p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr; p_rx_prev_desc = p_rx_desc; buffer_addr = rx_buff_base_addr; @@ -2830,7 +2759,7 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE)) return false; - /* Rx buffers must be 64-bit aligned. */ + /* Rx buffers must be 64-bit aligned. */ if ((rx_buff_base_addr + rx_buff_size) & 0x7) return false; @@ -2873,30 +2802,30 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory. * * DESCRIPTION: - * This function prepares a Tx chained list of descriptors and packet - * buffers in a form of a ring. The routine must be called after port - * initialization routine and before port start routine. - * The Ethernet SDMA engine uses CPU bus addresses to access the various - * devices in the system (i.e. DRAM). This function uses the ethernet - * struct 'virtual to physical' routine (set by the user) to set the ring - * with physical addresses. + * This function prepares a Tx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * int tx_desc_num Number of Tx descriptors - * int tx_buff_size Size of Tx buffer - * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. - * unsigned int tx_buff_base_addr Tx buffer memory area base addr. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * int tx_desc_num Number of Tx descriptors + * int tx_buff_size Size of Tx buffer + * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. + * unsigned int tx_buff_base_addr Tx buffer memory area base addr. * * OUTPUT: - * The routine updates the Ethernet port control struct with information - * regarding the Tx descriptors and buffers. + * The routine updates the Ethernet port control struct with information + * regarding the Tx descriptors and buffers. * * RETURN: - * false if the given descriptors memory area is not aligned according to - * Ethernet SDMA specifications. - * true otherwise. + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. * *******************************************************************************/ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, @@ -2912,7 +2841,6 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, unsigned int buffer_addr; int ix; /* a counter */ - /* save the first desc pointer to link with the last descriptor */ p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr; p_tx_prev_desc = p_tx_desc; @@ -2968,27 +2896,27 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * * DESCRIPTION: * This routine send a given packet described by p_pktinfo parameter. It - * supports transmitting of a packet spaned over multiple buffers. The - * routine updates 'curr' and 'first' indexes according to the packet - * segment passed to the routine. In case the packet segment is first, - * the 'first' index is update. In any case, the 'curr' index is updated. - * If the routine get into Tx resource error it assigns 'curr' index as - * 'first'. This way the function can abort Tx process of multiple - * descriptors per packet. + * supports transmitting of a packet spaned over multiple buffers. The + * routine updates 'curr' and 'first' indexes according to the packet + * segment passed to the routine. In case the packet segment is first, + * the 'first' index is update. In any case, the 'curr' index is updated. + * If the routine get into Tx resource error it assigns 'curr' index as + * 'first'. This way the function can abort Tx process of multiple + * descriptors per packet. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * PKT_INFO *p_pkt_info User packet buffer. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: * Tx ring 'curr' and 'first' indexes are updated. * * RETURN: - * ETH_QUEUE_FULL in case of Tx resource error. + * ETH_QUEUE_FULL in case of Tx resource error. * ETH_ERROR in case the routine can not access Tx desc ring. * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource. - * ETH_OK otherwise. + * ETH_OK otherwise. * *******************************************************************************/ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, @@ -3026,7 +2954,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, } /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */ - /* boundary. We use the memory allocated for Tx descriptor. This memory */ + /* boundary. We use the memory allocated for Tx descriptor. This memory */ /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */ if (p_pkt_info->byte_cnt <= 8) { printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */ @@ -3087,24 +3015,24 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, * * DESCRIPTION: * This routine returns the transmitted packet information to the caller. - * It uses the 'first' index to support Tx desc return in case a transmit - * of a packet spanned over multiple buffer still in process. - * In case the Tx queue was in "resource error" condition, where there are - * no available Tx resources, the function resets the resource error flag. + * It uses the 'first' index to support Tx desc return in case a transmit + * of a packet spanned over multiple buffer still in process. + * In case the Tx queue was in "resource error" condition, where there are + * no available Tx resources, the function resets the resource error flag. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * PKT_INFO *p_pkt_info User packet buffer. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: * Tx ring 'first' and 'used' indexes are updated. * * RETURN: * ETH_ERROR in case the routine can not access Tx desc ring. - * ETH_RETRY in case there is transmission in process. + * ETH_RETRY in case there is transmission in process. * ETH_END_OF_JOB if the routine has nothing to release. - * ETH_OK otherwise. + * ETH_OK otherwise. * *******************************************************************************/ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * @@ -3116,12 +3044,10 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * volatile ETH_TX_DESC *p_tx_desc_first = NULL; unsigned int command_status; - /* Get the Tx Desc ring indexes */ USED_TFD_GET (p_tx_desc_used, tx_queue); FIRST_TFD_GET (p_tx_desc_first, tx_queue); - /* Sanity check */ if (p_tx_desc_used == NULL) return ETH_ERROR; @@ -3163,16 +3089,16 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * eth_port_receive - Get received information from Rx ring. * * DESCRIPTION: - * This routine returns the received data to the caller. There is no + * This routine returns the received data to the caller. There is no * data copying during routine operation. All information is returned * using pointer to packet information struct passed from the caller. - * If the routine exhausts Rx ring resources then the resource error flag - * is set. + * If the routine exhausts Rx ring resources then the resource error flag + * is set. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * PKT_INFO *p_pkt_info User packet buffer. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: * Rx ring current and used indexes are updated. @@ -3181,7 +3107,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * ETH_ERROR in case the routine can not access Rx desc ring. * ETH_QUEUE_FULL if Rx ring resources are exhausted. * ETH_END_OF_JOB if there is no received data. - * ETH_OK otherwise. + * ETH_OK otherwise. * *******************************************************************************/ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, @@ -3213,7 +3139,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, /* Nothing to receive... */ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { -/* DP(printf("Rx: command_status: %08x\n", command_status)); */ +/* DP(printf("Rx: command_status: %08x\n", command_status)); */ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); /* DP(printf("\nETH_END_OF_JOB ...\n"));*/ return ETH_END_OF_JOB; @@ -3223,10 +3149,10 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, p_pkt_info->cmd_sts = command_status; p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET; p_pkt_info->return_info = p_rx_curr_desc->return_info; - p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ + p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ /* Clean the return info field to indicate that the packet has been */ - /* moved to the upper layers */ + /* moved to the upper layers */ p_rx_curr_desc->return_info = 0; /* Update 'curr' in data structure */ @@ -3247,21 +3173,21 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, * * DESCRIPTION: * This routine returns a Rx buffer back to the Rx ring. It retrieves the - * next 'used' descriptor and attached the returned buffer to it. - * In case the Rx ring was in "resource error" condition, where there are - * no available Rx resources, the function resets the resource error flag. + * next 'used' descriptor and attached the returned buffer to it. + * In case the Rx ring was in "resource error" condition, where there are + * no available Rx resources, the function resets the resource error flag. * * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * PKT_INFO *p_pkt_info Information on the returned buffer. + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info Information on the returned buffer. * * OUTPUT: * New available Rx resource in Rx descriptor ring. * * RETURN: * ETH_ERROR in case the routine can not access Rx desc ring. - * ETH_OK otherwise. + * ETH_OK otherwise. * *******************************************************************************/ static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * @@ -3316,9 +3242,9 @@ static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * * , and the required delay of the interrupt in usec. * * INPUT: - * ETH_PORT eth_port_num Ethernet port number - * unsigned int t_clk t_clk of the MV-643xx chip in HZ units - * unsigned int delay Delay in usec + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in usec * * OUTPUT: * Interrupt coalescing mechanism value is set in MV-643xx chip. @@ -3357,9 +3283,9 @@ static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num, * MV-643xx chip and the required delay in the interrupt in uSec * * INPUT: - * ETH_PORT eth_port_num Ethernet port number - * unsigned int t_clk t_clk of the MV-643xx chip in HZ units - * unsigned int delay Delay in uSeconds + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in uSeconds * * OUTPUT: * Interrupt coalescing mechanism value is set in MV-643xx chip. @@ -3387,20 +3313,20 @@ static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num, * eth_b_copy - Copy bytes from source to destination * * DESCRIPTION: - * This function supports the eight bytes limitation on Tx buffer size. - * The routine will zero eight bytes starting from the destination address - * followed by copying bytes from the source address to the destination. + * This function supports the eight bytes limitation on Tx buffer size. + * The routine will zero eight bytes starting from the destination address + * followed by copying bytes from the source address to the destination. * * INPUT: - * unsigned int src_addr 32 bit source address. - * unsigned int dst_addr 32 bit destination address. - * int byte_count Number of bytes to copy. + * unsigned int src_addr 32 bit source address. + * unsigned int dst_addr 32 bit destination address. + * int byte_count Number of bytes to copy. * * OUTPUT: - * See description. + * See description. * * RETURN: - * None. + * None. * *******************************************************************************/ static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c index b4556debff..176252efee 100644 --- a/board/prodrive/p3mx/sdram_init.c +++ b/board/prodrive/p3mx/sdram_init.c @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR; #undef DEBUG -#define MAP_PCI +#define MAP_PCI #ifdef DEBUG #define DP(x) x @@ -70,11 +70,12 @@ int memory_map_bank (unsigned int bankNo, #endif #ifdef DEBUG - if (bankLength > 0) + if (bankLength > 0) { printf ("mapping bank %d at %08x - %08x\n", bankNo, bankBase, bankBase + bankLength - 1); - else + } else { printf ("unmapping bank %d\n", bankNo); + } #endif memoryMapBank (bankNo, bankBase, bankLength); @@ -176,7 +177,7 @@ long int initdram (int board_type) /* calibrate delay lines */ set_dfcdlInit(); - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */ + GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */ do { tmp = GTREGREAD(MV64460_SDRAM_OPERATION); } while(tmp != 0x0); @@ -197,8 +198,8 @@ long int initdram (int board_type) /* SDRAM drive strength */ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */ - GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */ - GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */ + GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */ + GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */ /* setup SDRAM device registers */ @@ -306,22 +307,22 @@ void board_add_ram_info(int use_default) /* * mvDmaIsChannelActive - Check if IDMA channel is active * - * channel = IDMA channel number from 0 to 7 + * channel = IDMA channel number from 0 to 7 */ int mvDmaIsChannelActive (int channel) { - ulong data; + ulong data; - data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel); - if (data & BIT14) /* activity status */ - return 1; + data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel); + if (data & BIT14) /* activity status */ + return 1; - return 0; + return 0; } /* * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding - * map. + * map. * * memSpace = IDMA memory window number from 0 to 7 * trg_if = Target interface: @@ -363,9 +364,9 @@ int mvDmaSetMemorySpace (ulong memSpace, /* * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4 - * DMA channels. + * DMA channels. * - * channel = IDMA channel number from 0 to 3 + * channel = IDMA channel number from 0 to 3 * destAddr = Destination address * sourceAddr = Source address * size = Size in bytes @@ -385,7 +386,7 @@ int mvDmaTransfer (int channel, ulong sourceAddr, GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr); GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr); command = command | - BIT12 | /* DMA_CHANNEL_ENABLE */ + BIT12 | /* DMA_CHANNEL_ENABLE */ BIT9; /* DMA_NON_CHAIN_MODE */ /* Activate DMA channel By writting to mvDmaControlRegister */ GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command); From dd520bf314c7add4183c5191692180f576f96b60 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 30 Nov 2006 18:02:20 +0100 Subject: [PATCH 66/72] Code cleanup. --- CHANGELOG | 422 ++++++++++++++ Makefile | 30 +- board/BuS/EB+MCF-EV123/EB+MCF-EV123.c | 10 +- board/BuS/EB+MCF-EV123/VCxK.c | 2 +- board/BuS/EB+MCF-EV123/VCxK.h | 16 +- board/BuS/EB+MCF-EV123/cfm_flash.c | 2 +- board/BuS/EB+MCF-EV123/flash.c | 2 +- board/BuS/EB+MCF-EV123/u-boot.lds | 8 +- board/LEOX/elpt860/u-boot.lds | 8 +- board/LEOX/elpt860/u-boot.lds.debug | 8 +- board/MAI/AmigaOneG3SE/Makefile | 2 +- board/MAI/AmigaOneG3SE/articiaS_pci.c | 10 +- board/MAI/AmigaOneG3SE/enet.c | 148 ++--- board/emk/top5200/top5200.c | 2 +- board/esd/cpci5200/cpci5200.c | 3 +- board/esd/pf5200/pf5200.c | 3 +- board/icecube/icecube.c | 2 +- board/mpc8349emds/pci.c | 2 +- common/cmd_nand.c | 316 +++++----- cpu/74xx_7xx/cpu.c | 2 +- cpu/mpc83xx/spd_sdram.c | 20 +- doc/README.mpc8360emds | 2 +- drivers/qe/uccf.c | 2 +- drivers/qe/uec_phy.c | 791 +++++++++++++------------- drivers/qe/uec_phy.h | 299 +++++----- include/asm-ppc/immap_83xx.h | 630 ++++++++++---------- include/configs/MPC8349ITX.h | 144 ++--- include/configs/MPC8360EMDS.h | 82 +-- include/ioports.h | 1 - lib_ppc/board.c | 22 +- 30 files changed, 1710 insertions(+), 1281 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 305cee8fd3..b74f53698c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,9 @@ +commit 8d9a8610b8256331132227e9e6585c6bd5742787 +Author: Wolfgang Denk +Date: Thu Nov 30 01:54:07 2006 +0100 + + Code cleanup. Update CHANGELOG. + commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba Author: Grant Likely Date: Wed Nov 29 16:23:42 2006 +0100 @@ -52,6 +58,49 @@ Date: Wed Nov 29 12:03:57 2006 +0100 Signed-off-by: Jeff Mann Signed-off-by: Stefan Roese +commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a +Author: Joakim Tjernlund +Date: Tue Nov 28 16:17:27 2006 -0600 + + Make fsl-i2c not conflict with SOFT I2C + + Signed-off-by: Timur Tabi + +commit 14198bf768fdc958e3c1afd2404e5262208e98d7 +Author: Joakim Tjernlund +Date: Tue Nov 28 16:17:18 2006 -0600 + + Fix I2C master address initialization. + + Signed-off-by: Timur Tabi + +commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 +Author: Kim Phillips +Date: Tue Nov 28 23:31:19 2006 -0600 + + Assign maintainers for mpc8349emds and mpc8360emds + + Dave for mpc8360emds, and me for mpc8349emds. + +commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 +Author: Kim Phillips +Date: Tue Nov 28 23:28:33 2006 -0600 + + Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c + + give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src + since they are passed by reference to ucc_get_cmxucr_reg and assigned. + +commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 +Author: Timur Tabi +Date: Tue Nov 28 12:09:35 2006 -0600 + + mpc83xx: Miscellaneous code style fixes + + Implement various code style fixes and similar changes. + + Signed-off-by: Timur Tabi + commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 Author: Stefan Roese Date: Tue Nov 28 17:55:49 2006 +0100 @@ -268,6 +317,379 @@ Date: Mon Nov 6 17:06:36 2006 +0100 This fixes get_ram_size() problems on MPC5200 Rev. B boards. +commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa +Author: Timur Tabi +Date: Fri Nov 3 19:15:00 2006 -0600 + + mpc83xx: Update 83xx to use fsl_i2c.c + + Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete + cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. + Added multiple I2C bus support to fsl_i2c.c. + + Signed-off-by: Timur Tabi + +commit d239d74b1c937984bc519083a8e7de373a390f06 +Author: Timur Tabi +Date: Fri Nov 3 12:00:28 2006 -0600 + + mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR + + Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx + tree matches the other 8xxx trees. + + Signed-off-by: Timur Tabi + +commit f7fb2e703ec9688541416962724adff70a7322cb +Author: Kim Phillips +Date: Thu Nov 2 19:47:11 2006 -0600 + + mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c + +commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 +Author: Dave Liu +Date: Thu Nov 2 18:05:50 2006 -0600 + + mpc83xx: Fix the incorrect dcbz operation + + The 834x rev1.x silicon has one CPU5 errata. + + The issue is when the data cache locked with + HID0[DLOCK], the dcbz instruction looks like no-op inst. + + The right behavior of the data cache is when the data cache + Locked with HID0[DLOCK], the dcbz instruction allocates + new tags in cache. + + The 834x rev3.0 and later and 8360 have not this bug inside. + + So, when 834x rev3.0/8360 are working with ECC, the dcbz + instruction will corrupt the stack in cache, the processor will + checkstop reset. + + However, the 834x rev1.x can work with ECC with these code, + because the sillicon has this cache bug. The dcbz will not + corrupt the stack in cache. + Really, it is the fault code running on fault sillicon. + + This patch fix the incorrect dcbz operation. Instead of + CPU FP writing to initialise the ECC. + + CHANGELOG: + * Fix the incorrect dcbz operation instead of CPU FP + writing to initialise the ECC memory. Otherwise, it + will corrupt the stack in cache, The processor will checkstop + reset. + + Signed-off-by: Dave Liu + +commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d +Author: Kim Phillips +Date: Wed Nov 1 00:10:40 2006 -0600 + + mpc83xx: add OF_FLAT_TREE bits to 83xx boards + + add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and + STDOUT_PATH configuration bits to mpc8349emds, + mpc8349itx, and mpc8360emds board code. + + redo environment to use bootm with the fdtaddr + for booting ARCH=powerpc kernels by default, + and provide default fdtaddr values. + +commit 48041365b3420589ad464ebc7752e0053538b729 +Author: Kim Phillips +Date: Wed Nov 1 00:07:25 2006 -0600 + + mpc83xx: change ft code to modify local-mac-address property + + Update 83xx OF code to update local-mac-address properties + for ethernet instead of the obsolete 'address' property. + +commit 9ca880a250870a7d55754291b5591d2b5fe89b54 +Author: Timur Tabi +Date: Tue Oct 31 21:23:16 2006 -0600 + + mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS + + This patch also adds an improved I2C set_speed(), which handles all clock + frequencies. + + Signed-off-by: Timur Tabi + +commit ac4b5622ce050b5ee1e154b98df630d778661632 +Author: Dave Liu +Date: Tue Oct 31 19:54:59 2006 -0600 + + mpc83xx: add the README.mpc8360emds + + add doc/README.mpc8360emds to accompany the new board support + +commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef +Author: Dave Liu +Date: Fri Nov 3 12:11:15 2006 -0600 + + mpc83xx: add QE ethernet support + + this patch adds support for the QUICC Engine based UCC gigabit ethernet device. + +commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 +Author: Dave Liu +Date: Fri Nov 3 19:33:44 2006 -0600 + + mpc83xx: Add MPC8360EMDS basic board support + + Add support for the Freescale MPC8360EMDS board. + Includes DDR, DUART, Local Bus, PCI. + +commit 23892e49352de74f7fac36ff90bb1be143d195e3 +Author: Dave Liu +Date: Tue Oct 31 19:30:40 2006 -0600 + + mpc83xx: add the QUICC Engine (QE) immap file + + common QE immap file. Also required for 8360. + +commit b701652a4992bdcc62fb1a6038a85beef9e55da4 +Author: Dave Liu +Date: Tue Oct 31 19:25:38 2006 -0600 + + mpc83xx: Add 8360 specifics to 83xx immap + + Mainly add QE device dependencies, with appropriate 8360 protection. + Lindent also run. + +commit 988833324a7fda482c8ac3ca23eb539f8232e404 +Author: Timur Tabi +Date: Tue Oct 31 19:14:41 2006 -0600 + + mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" + 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" + + CHANGELOG: + + * For the 8349E-mITX, fix some size values in pci_init_board(), enable + the clock for the 2nd USB board (Linux kernel will hang otherwise), + and fix the CONFIG_BOOTARGS macro. + + Signed-off-by: Timur Tabi + +commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 +Author: Timur Tabi +Date: Tue Oct 31 18:44:42 2006 -0600 + + mpc83xx: Add support for the MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006090742000024 "Add support for multiple I2C buses" + 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" + 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" + 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" + 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" + + CHANGELOG: + + * Add support for the Freescale MPC8349E-mITX reference design platform. + The second TSEC (Vitesse 7385 switch) is not supported at this time. + + Signed-off-by: Timur Tabi + +commit 183da6d9b446cc12123455844ad1187e2375626f +Author: Ben Warren +Date: Tue Sep 12 10:15:53 2006 -0400 + + Additional MPC8349 support for multibus i2c + + Hello, + + Here is a patch for a file that was accidentally left out of a previous + attempt. + + It accompanies the patch with ticket DNX#2006090742000024 + + CHANGELOG: + Change PCI initialization to use new multi-bus I2C API. + + regards, + Ben + +commit b24f119d672b709d153ff2ac091d4aa63ec6877d +Author: Ben Warren +Date: Thu Sep 7 16:51:04 2006 -0400 + + Multi-bus I2C implementation of MPC834x + + Hello, + + Attached is a patch implementing multiple I2C buses on the MPC834x CPU + family and the MPC8349EMDS board in particular. + This patch requires Patch 1 (Add support for multiple I2C buses). + Testing was performed on a 533MHz board. + + /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ + + Signed-off-by: Ben Warren + + CHANGELOG: + Implemented driver-level code to support two I2C buses on the + MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds + are 50kHz, 100kHz and 400kHz on each bus. + + regards, + Ben + +commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae +Author: Ben Warren +Date: Thu Sep 7 16:50:54 2006 -0400 + + Add support for multiple I2C buses + + Hello, + + Attached is a patch providing support for multiple I2C buses at the + command level. The second part of the patch includes an implementation + for the MPC834x CPU and MPC8349EMDS board. + + /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ + + Signed-off-by: Ben Warren + + Overview: + + 1. Include new 'i2c' command (based on USB implementation) using + CONFIG_I2C_CMD_TREE. + + 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that + the commands to change bus number and speed are only available under the + new 'i2c' command mentioned in the first bullet. + + 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus + systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form + of an array of bus-device pairs. Otherwise, it is an array of uchar. + + CHANGELOG: + Added new 'i2c' master command for all I2C interaction. This is + conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for + setting I2C bus speed as well as changing the active bus if the board + has more than one (conditionally compiled with + CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. + Updated README. + + regards, + Ben + +commit bed85caf872714ebf53013967a695c9d63acfc68 +Author: Timur Tabi +Date: Tue Oct 31 18:13:36 2006 -0600 + + mpc83xx: Add support for Errata DDR6 on MPC 834x systems + + CHANGELOG: + + * Errata DDR6, which affects all current MPC 834x processors, lists changes + required to maintain compatibility with various types of DDR memory. This + patch implements those changes. + + Signed-off-by: Timur Tabi + +commit afd6e470f639883002c7c59d562690a5cb0f4865 +Author: Timur Tabi +Date: Wed Oct 25 18:45:23 2006 -0500 + + mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it + +commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a +Author: Timur Tabi +Date: Tue Aug 22 17:07:00 2006 -0500 + + mpc83xx: Add support for variable flash memory sizes on 83xx systems + + CHANGELOG: + + * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access + window registers, instead of using a hard-coded value of 8MB. + + Signed-off-by: Timur Tabi + +commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 +Author: Tanya Jiang +Date: Thu Aug 3 18:38:13 2006 +0800 + + mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros + + Unified TQM834x variable names with 83xx and consolidated macro + in preparation for the 8360 and other upcoming 83xx devices. + + Signed-off-by: Tanya Jiang + +commit f6eda7f80ccc13d658020268c507d7173cf2e8aa +Author: Dave Liu +Date: Wed Oct 25 14:41:21 2006 -0500 + + mpc83xx: Changed to unified mpx83xx names and added common 83xx changes + + Incorporated the common unified variable names and the changes in preparation + for releasing mpc8360 patches. + + Signed-off-by: Dave Liu + +commit 3894c46c27c64891f93ac04edde86a9fa9758d92 +Author: Tanya Jiang +Date: Thu Aug 3 18:36:02 2006 +0800 + + mpc83xx: Fix missing build for mpc8349emds pci.c + + Make pci build for mpc8349emds + + Signed-off-by: Tanya Jiang + +commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 +Author: Tanya Jiang +Date: Thu Aug 3 18:39:49 2006 +0800 + + mpc83xx: Removed unused file resetvec.S for mpc83xx cpu + + Removed unused file resetvec.S for mpc83xx cpu + + Signed-off-by: Tanya Jiang + +commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf +Author: Nick Spence +Date: Sat Sep 30 00:32:59 2006 -0700 + + NAND Flash verify across block boundaries + + This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is + defined + and the write crosses a block boundary. The pointer to the verification + buffer (bufstart) is not being updated to reflect the starting of the + new + block so the verification of the second block fails. + + CHANGELOG: + + * Fix NAND FLASH page verification across block boundaries + +commit f484dc791a3932537213c43c654cc1295c64b84c +Author: Nick Spence +Date: Thu Sep 7 07:39:46 2006 -0700 + + Added RGMII support to the TSECs and Marvell 881111 Phy + + Added a phy initialization to adjust the RGMII RX and TX timing + Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode + + Signed-off-by: Nick Spence + commit c59200443072353044aa4bf737a5a60f9a9af231 Author: Wolfgang Denk Date: Thu Nov 2 15:15:01 2006 +0100 diff --git a/Makefile b/Makefile index 7a0b12c4bd..d2534ab776 100644 --- a/Makefile +++ b/Makefile @@ -93,7 +93,7 @@ MKCONFIG := $(SRCTREE)/mkconfig export MKCONFIG ifneq ($(OBJTREE),$(SRCTREE)) -REMOTE_BUILD := 1 +REMOTE_BUILD := 1 export REMOTE_BUILD endif @@ -378,8 +378,8 @@ Lite5200_LOWBOOT08_config \ icecube_5200_config \ icecube_5200_LOWBOOT_config \ icecube_5200_LOWBOOT08_config \ -icecube_5200_DDR_config \ -icecube_5200_DDR_LOWBOOT_config \ +icecube_5200_DDR_config \ +icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_LOWBOOT08_config \ icecube_5100_config: unconfig @mkdir -p $(obj)include @@ -458,7 +458,7 @@ prs200_highboot_DDR_config: unconfig @[ -n "$(findstring _SDRAM,$@)" ] || \ { if [ -n "$(findstring mcc200,$@)" ]; \ then \ - echo "... with DDR" ; \ + echo "... with DDR" ; \ else \ if [ -n "$(findstring _DDR,$@)" ];\ then \ @@ -865,9 +865,9 @@ RPXClassic_config: unconfig RPXlite_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite -RPXlite_DW_64_config \ -RPXlite_DW_LCD_config \ -RPXlite_DW_64_LCD_config \ +RPXlite_DW_64_config \ +RPXlite_DW_LCD_config \ +RPXlite_DW_64_LCD_config \ RPXlite_DW_NVRAM_config \ RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_LCD_config \ @@ -880,12 +880,12 @@ RPXlite_DW_config: unconfig echo "... with 64MHz system clock ..."; \ } @[ -z "$(findstring _LCD,$@)" ] || \ - { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ echo "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ + { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ echo "... with ENV in NVRAM ..."; \ } @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw @@ -1821,7 +1821,7 @@ ap966_config \ ap922_config \ ap922_XA10_config \ ap7_config \ -ap720t_config \ +ap720t_config \ ap920t_config \ ap926ejs_config \ ap946es_config: unconfig @@ -1978,7 +1978,7 @@ cm4008_config : unconfig cm41xx_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 -gth2_config : unconfig +gth2_config : unconfig @mkdir -p $(obj)include @ >$(obj)include/config.h @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h @@ -2124,19 +2124,19 @@ tb0229_config: unconfig ######################################################################### ## MIPS32 AU1X00 ######################################################################### -dbau1000_config : unconfig +dbau1000_config : unconfig @mkdir -p $(obj)include @ >$(obj)include/config.h @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 -dbau1100_config : unconfig +dbau1100_config : unconfig @mkdir -p $(obj)include @ >$(obj)include/config.h @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 -dbau1500_config : unconfig +dbau1500_config : unconfig @mkdir -p $(obj)include @ >$(obj)include/config.h @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h @@ -2154,7 +2154,7 @@ dbau1550_el_config : unconfig @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 -pb1000_config : unconfig +pb1000_config : unconfig @mkdir -p $(obj)include @ >$(obj)include/config.h @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index f18313d516..dcfd83ed27 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -50,13 +50,13 @@ long int initdram (int board_type) MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0) | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_CBM(3) | MCFSDRAMC_DACR_PS_16); MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; - MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; *(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5; MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; @@ -70,10 +70,10 @@ long int initdram (int board_type) #ifdef CFG_SDRAM_BASE1 MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1) | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_CBM(3) | MCFSDRAMC_DACR_PS_16; - MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M + MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; @@ -82,7 +82,7 @@ long int initdram (int board_type) MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; for (i=0; i < 2000; i++) asm(" nop"); - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; *(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; size += CFG_SDRAM_SIZE1 * 1024 * 1024; #endif diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c index 493881791b..4b46b7c9a5 100644 --- a/board/BuS/EB+MCF-EV123/VCxK.c +++ b/board/BuS/EB+MCF-EV123/VCxK.c @@ -66,7 +66,7 @@ int init_vcxk(void) return 1; } -void vcxk_loadimage(ulong source) +void vcxk_loadimage(ulong source) { int cnt; vcxk_acknowledge_wait(); diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h index 74467ba98a..f591e5c52f 100644 --- a/board/BuS/EB+MCF-EV123/VCxK.h +++ b/board/BuS/EB+MCF-EV123/VCxK.h @@ -25,24 +25,24 @@ #define __VCXK_H_ extern int init_vcxk(void); -void vcxk_loadimage(ulong source); +void vcxk_loadimage(ulong source); #define VIDEO_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT -#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR +#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR #define VIDEO_ACKNOWLEDGE_PIN 0x0001 -#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT -#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR +#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT +#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR #define VIDEO_ENABLE_PIN 0x0002 -#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT -#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR +#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT +#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR #define VIDEO_REQUEST_PIN 0x0004 #define VIDEO_Invert_CFG MCFGPIO_PEPAR #define VIDEO_Invert_IO MCFGPIO_PEPAR_PEPA2 -#define VIDEO_INVERT_PORT MCFGPIO_PORTE -#define VIDEO_INVERT_DDR MCFGPIO_DDRE +#define VIDEO_INVERT_PORT MCFGPIO_PORTE +#define VIDEO_INVERT_DDR MCFGPIO_DDRE #define VIDEO_INVERT_PIN MCFGPIO_PORT2 #endif diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c index 6ecf0d1f54..b326384102 100644 --- a/board/BuS/EB+MCF-EV123/cfm_flash.c +++ b/board/BuS/EB+MCF-EV123/cfm_flash.c @@ -60,7 +60,7 @@ void cfm_flash_init (flash_info_t * info) MCFCFM_MCR = 0; MCFCFM_CLKD = CFM_CLK; debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\ - CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\ + CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\ CFG_CLK); MCFCFM_SACC = 0; MCFCFM_DACC = 0; diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c index ba76bef12e..5e2647ddad 100644 --- a/board/BuS/EB+MCF-EV123/flash.c +++ b/board/BuS/EB+MCF-EV123/flash.c @@ -256,7 +256,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) enable_interrupts (); if (cflag) - icache_enable (); + icache_enable (); return rc; } diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds index d790018d2d..ac532451c9 100644 --- a/board/BuS/EB+MCF-EV123/u-boot.lds +++ b/board/BuS/EB+MCF-EV123/u-boot.lds @@ -34,11 +34,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index b09fc3390a..214752d9c0 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -43,11 +43,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug index 6f5af91fd1..17f99eb840 100644 --- a/board/LEOX/elpt860/u-boot.lds.debug +++ b/board/LEOX/elpt860/u-boot.lds.debug @@ -43,11 +43,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile index cb6ea26298..fa28d3b495 100644 --- a/board/MAI/AmigaOneG3SE/Makefile +++ b/board/MAI/AmigaOneG3SE/Makefile @@ -30,7 +30,7 @@ endif LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ - via686.o i8259.o ../bios_emulator/x86interface.o \ + via686.o i8259.o ../bios_emulator/x86interface.o \ ../bios_emulator/bios.o ../bios_emulator/glue.o \ interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \ ../menu/cmd_menu.o cmd_boota.o nvram.o diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c index 480dae5b96..45b8195012 100644 --- a/board/MAI/AmigaOneG3SE/articiaS_pci.c +++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c @@ -368,11 +368,11 @@ void articiaS_pci_init (void) if (articiaS_init_vga() == -1) { /* If the VGA didn't init and we have stdout set to VGA, reset to serial */ -/* s = getenv("stdout"); */ -/* if (s && strcmp(s, "vga") == 0) */ -/* { */ -/* setenv("stdout", "serial"); */ -/* } */ +/* s = getenv("stdout"); */ +/* if (s && strcmp(s, "vga") == 0) */ +/* { */ +/* setenv("stdout", "serial"); */ +/* } */ } } pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c index d4be889ea8..ad2bcdeffe 100644 --- a/board/MAI/AmigaOneG3SE/enet.c +++ b/board/MAI/AmigaOneG3SE/enet.c @@ -41,57 +41,57 @@ /* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */ -#define TotalReset (0<<11) -#define SelectWindow (1<<11) -#define StartCoax (2<<11) -#define RxDisable (3<<11) -#define RxEnable (4<<11) -#define RxReset (5<<11) -#define UpStall (6<<11) -#define UpUnstall (6<<11)+1 -#define DownStall (6<<11)+2 -#define DownUnstall (6<<11)+3 -#define RxDiscard (8<<11) -#define TxEnable (9<<11) -#define TxDisable (10<<11) -#define TxReset (11<<11) -#define FakeIntr (12<<11) -#define AckIntr (13<<11) -#define SetIntrEnb (14<<11) -#define SetStatusEnb (15<<11) -#define SetRxFilter (16<<11) -#define SetRxThreshold (17<<11) -#define SetTxThreshold (18<<11) -#define SetTxStart (19<<11) -#define StartDMAUp (20<<11) -#define StartDMADown (20<<11)+1 +#define TotalReset (0<<11) +#define SelectWindow (1<<11) +#define StartCoax (2<<11) +#define RxDisable (3<<11) +#define RxEnable (4<<11) +#define RxReset (5<<11) +#define UpStall (6<<11) +#define UpUnstall (6<<11)+1 +#define DownStall (6<<11)+2 +#define DownUnstall (6<<11)+3 +#define RxDiscard (8<<11) +#define TxEnable (9<<11) +#define TxDisable (10<<11) +#define TxReset (11<<11) +#define FakeIntr (12<<11) +#define AckIntr (13<<11) +#define SetIntrEnb (14<<11) +#define SetStatusEnb (15<<11) +#define SetRxFilter (16<<11) +#define SetRxThreshold (17<<11) +#define SetTxThreshold (18<<11) +#define SetTxStart (19<<11) +#define StartDMAUp (20<<11) +#define StartDMADown (20<<11)+1 #define StatsEnable (21<<11) #define StatsDisable (22<<11) -#define StopCoax (23<<11) -#define SetFilterBit (25<<11) +#define StopCoax (23<<11) +#define SetFilterBit (25<<11) /* The SetRxFilter command accepts the following classes */ -#define RxStation 1 +#define RxStation 1 #define RxMulticast 2 #define RxBroadcast 4 -#define RxProm 8 +#define RxProm 8 /* 3Com status word defnitions */ -#define IntLatch 0x0001 -#define HostError 0x0002 -#define TxComplete 0x0004 -#define TxAvailable 0x0008 -#define RxComplete 0x0010 -#define RxEarly 0x0020 -#define IntReq 0x0040 -#define StatsFull 0x0080 -#define DMADone (1<<8) -#define DownComplete (1<<9) -#define UpComplete (1<<10) -#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ -#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ +#define IntLatch 0x0001 +#define HostError 0x0002 +#define TxComplete 0x0004 +#define TxAvailable 0x0008 +#define RxComplete 0x0010 +#define RxEarly 0x0020 +#define IntReq 0x0040 +#define StatsFull 0x0080 +#define DMADone (1<<8) +#define DownComplete (1<<9) +#define UpComplete (1<<10) +#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ +#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ /* Polling Registers */ @@ -100,17 +100,17 @@ /* Register window 0 offets */ -#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ -#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ +#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ +#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ #define IntrStatus 0x0E /* Valid in all windows. */ /* Register window 0 EEPROM bits */ -#define EEPROM_Read 0x80 -#define EEPROM_WRITE 0x40 -#define EEPROM_ERASE 0xC0 -#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ -#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ +#define EEPROM_Read 0x80 +#define EEPROM_WRITE 0x40 +#define EEPROM_ERASE 0xC0 +#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ +#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ /* EEPROM locations. */ @@ -129,13 +129,13 @@ /* Register window 1 offsets, the window used in normal operation */ -#define TX_FIFO 0x10 -#define RX_FIFO 0x10 -#define RxErrors 0x14 -#define RxStatus 0x18 +#define TX_FIFO 0x10 +#define RX_FIFOa 0x10 +#define RxErrors 0x14 +#define RxStatus 0x18 #define Timer 0x1A -#define TxStatus 0x1B -#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ +#define TxStatus 0x1B +#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ /* Register Window 2 */ @@ -147,47 +147,47 @@ #define Wn3_MAC_Ctrl 6 #define Wn3_Options 8 -#define BFEXT(value, offset, bitcount) \ +#define BFEXT(value, offset, bitcount) \ ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) #define BFINS(lhs, rhs, offset, bitcount) \ - (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ + (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) #define RAM_SIZE(v) BFEXT(v, 0, 3) -#define RAM_WIDTH(v) BFEXT(v, 3, 1) -#define RAM_SPEED(v) BFEXT(v, 4, 2) +#define RAM_WIDTH(v) BFEXT(v, 3, 1) +#define RAM_SPEED(v) BFEXT(v, 4, 2) #define ROM_SIZE(v) BFEXT(v, 6, 2) -#define RAM_SPLIT(v) BFEXT(v, 16, 2) +#define RAM_SPLIT(v) BFEXT(v, 16, 2) #define XCVR(v) BFEXT(v, 20, 4) -#define AUTOSELECT(v) BFEXT(v, 24, 1) +#define AUTOSELECT(v) BFEXT(v, 24, 1) /* Register Window 4: Xcvr/media bits */ -#define Wn4_FIFODiag 4 -#define Wn4_NetDiag 6 +#define Wn4_FIFODiag 4 +#define Wn4_NetDiag 6 #define Wn4_PhysicalMgmt 8 -#define Wn4_Media 10 +#define Wn4_Media 10 -#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ -#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ -#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ -#define Media_LnkBeat 0x0800 +#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ +#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ +#define Media_LnkBeat 0x0800 /* Register Window 7: Bus Master control */ -#define Wn7_MasterAddr 0 -#define Wn7_MasterLen 6 -#define Wn7_MasterStatus 12 +#define Wn7_MasterAddr 0 +#define Wn7_MasterLen 6 +#define Wn7_MasterStatus 12 /* Boomerang bus master control registers. */ -#define PktStatus 0x20 +#define PktStatus 0x20 #define DownListPtr 0x24 -#define FragAddr 0x28 -#define FragLen 0x2c +#define FragAddr 0x28 +#define FragLen 0x2c #define TxFreeThreshold 0x2f -#define UpPktStatus 0x30 +#define UpPktStatus 0x30 #define UpListPtr 0x38 /* The Rx and Tx descriptor lists. */ diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c index 12acc57171..d741e6b5ce 100644 --- a/board/emk/top5200/top5200.c +++ b/board/emk/top5200/top5200.c @@ -190,7 +190,7 @@ void init_ide_reset (void) { debug ("init_ide_reset\n"); - /* Configure PSC1_4 as GPIO output for ATA reset */ + /* Configure PSC1_4 as GPIO output for ATA reset */ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; } diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index f14331bebc..a925b84fd9 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -191,8 +191,7 @@ static struct pci_controller hose; extern void pci_mpc5xxx_init(struct pci_controller *); -void pci_init_board(void - ) { +void pci_init_board(void) { pci_mpc5xxx_init(&hose); } #endif diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index 1f30d454ff..77e164bd18 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -191,8 +191,7 @@ static struct pci_controller hose; extern void pci_mpc5xxx_init(struct pci_controller *); -void pci_init_board(void - ) { +void pci_init_board(void) { pci_mpc5xxx_init(&hose); } #endif diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index ddad1bbb9e..700c9d9323 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -316,7 +316,7 @@ void init_ide_reset (void) { debug ("init_ide_reset\n"); - /* Configure PSC1_4 as GPIO output for ATA reset */ + /* Configure PSC1_4 as GPIO output for ATA reset */ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; /* Deassert reset */ diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index bb60e730bc..d6a12b82a4 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -74,7 +74,7 @@ pib_init(void) */ /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); + i2c_set_bus_num(1); val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 7286726f1c..b011b5e3de 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -684,178 +684,182 @@ extern int nand_write_oob(struct nand_chip *nand, size_t ofs, size_t len, size_t *retlen, const u_char *buf); -int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - int rcode = 0; + int rcode = 0; - switch (argc) { - case 0: - case 1: - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - case 2: - if (strcmp(argv[1],"info") == 0) { - int i; + switch (argc) { + case 0: + case 1: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + case 2: + if (strcmp (argv[1], "info") == 0) { + int i; - putc ('\n'); + putc ('\n'); - for (i=0; i= CFG_MAX_NAND_DEVICE)) { - puts ("\nno devices available\n"); - return 1; - } - printf ("\nDevice %d: ", curr_device); - nand_print(&nand_dev_desc[curr_device]); - return 0; - - } else if (strcmp(argv[1],"bad") == 0) { - if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) { - puts ("\nno devices available\n"); - return 1; - } - printf ("\nDevice %d bad blocks:\n", curr_device); - nand_print_bad(&nand_dev_desc[curr_device]); - return 0; - - } - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - case 3: - if (strcmp(argv[1],"device") == 0) { - int dev = (int)simple_strtoul(argv[2], NULL, 10); - - printf ("\nDevice %d: ", dev); - if (dev >= CFG_MAX_NAND_DEVICE) { - puts ("unknown device\n"); - return 1; - } - nand_print(&nand_dev_desc[dev]); - /*nand_print (dev);*/ - - if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) { - return 1; - } - - curr_device = dev; - - puts ("... is now current device\n"); - - return 0; - } - else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) { - struct nand_chip* nand = &nand_dev_desc[curr_device]; - ulong off = 0; - ulong size = nand->totlen; - int ret; - - printf ("\nNAND erase: device %d offset %ld, size %ld ... ", - curr_device, off, size); - - ret = nand_legacy_erase (nand, off, size, 1); - - printf("%s\n", ret ? "ERROR" : "OK"); - - return ret; - } - - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - default: - /* at least 4 args */ - - if (strncmp(argv[1], "read", 4) == 0 || - strncmp(argv[1], "write", 5) == 0) { - ulong addr = simple_strtoul(argv[2], NULL, 16); - ulong off = simple_strtoul(argv[3], NULL, 16); - ulong size = simple_strtoul(argv[4], NULL, 16); - int cmd = (strncmp(argv[1], "read", 4) == 0) ? - NANDRW_READ : NANDRW_WRITE; - int ret, total; - char* cmdtail = strchr(argv[1], '.'); - - if (cmdtail && !strncmp(cmdtail, ".oob", 2)) { - /* read out-of-band data */ - if (cmd & NANDRW_READ) { - ret = nand_read_oob(nand_dev_desc + curr_device, - off, size, (size_t *)&total, - (u_char*)addr); + for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) { + if (nand_dev_desc[i].ChipID == + NAND_ChipID_UNKNOWN) + continue; /* list only known devices */ + printf ("Device %d: ", i); + nand_print (&nand_dev_desc[i]); } - else { - ret = nand_write_oob(nand_dev_desc + curr_device, - off, size, (size_t *)&total, - (u_char*)addr); + return 0; + + } else if (strcmp (argv[1], "device") == 0) { + if ((curr_device < 0) + || (curr_device >= CFG_MAX_NAND_DEVICE)) { + puts ("\nno devices available\n"); + return 1; } + printf ("\nDevice %d: ", curr_device); + nand_print (&nand_dev_desc[curr_device]); + return 0; + + } else if (strcmp (argv[1], "bad") == 0) { + if ((curr_device < 0) + || (curr_device >= CFG_MAX_NAND_DEVICE)) { + puts ("\nno devices available\n"); + return 1; + } + printf ("\nDevice %d bad blocks:\n", curr_device); + nand_print_bad (&nand_dev_desc[curr_device]); + return 0; + + } + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + case 3: + if (strcmp (argv[1], "device") == 0) { + int dev = (int) simple_strtoul (argv[2], NULL, 10); + + printf ("\nDevice %d: ", dev); + if (dev >= CFG_MAX_NAND_DEVICE) { + puts ("unknown device\n"); + return 1; + } + nand_print (&nand_dev_desc[dev]); + /*nand_print (dev); */ + + if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) { + return 1; + } + + curr_device = dev; + + puts ("... is now current device\n"); + + return 0; + } else if (strcmp (argv[1], "erase") == 0 + && strcmp (argv[2], "clean") == 0) { + struct nand_chip *nand = &nand_dev_desc[curr_device]; + ulong off = 0; + ulong size = nand->totlen; + int ret; + + printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size); + + ret = nand_legacy_erase (nand, off, size, 1); + + printf ("%s\n", ret ? "ERROR" : "OK"); + return ret; } - else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2)) - cmd |= NANDRW_JFFS2; /* skip bad blocks */ - else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) { - cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ - if (cmd & NANDRW_READ) - cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ - } + + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + default: + /* at least 4 args */ + + if (strncmp (argv[1], "read", 4) == 0 || + strncmp (argv[1], "write", 5) == 0) { + ulong addr = simple_strtoul (argv[2], NULL, 16); + ulong off = simple_strtoul (argv[3], NULL, 16); + ulong size = simple_strtoul (argv[4], NULL, 16); + int cmd = (strncmp (argv[1], "read", 4) == 0) ? + NANDRW_READ : NANDRW_WRITE; + int ret, total; + char *cmdtail = strchr (argv[1], '.'); + + if (cmdtail && !strncmp (cmdtail, ".oob", 2)) { + /* read out-of-band data */ + if (cmd & NANDRW_READ) { + ret = nand_read_oob (nand_dev_desc + curr_device, + off, size, (size_t *) & total, + (u_char *) addr); + } else { + ret = nand_write_oob (nand_dev_desc + curr_device, + off, size, (size_t *) & total, + (u_char *) addr); + } + return ret; + } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2)) + cmd |= NANDRW_JFFS2; /* skip bad blocks */ + else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) { + cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ + if (cmd & NANDRW_READ) + cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ + } #ifdef SXNI855T - /* need ".e" same as ".j" for compatibility with older units */ - else if (cmdtail && !strcmp(cmdtail, ".e")) - cmd |= NANDRW_JFFS2; /* skip bad blocks */ + /* need ".e" same as ".j" for compatibility with older units */ + else if (cmdtail && !strcmp (cmdtail, ".e")) + cmd |= NANDRW_JFFS2; /* skip bad blocks */ #endif #ifdef CFG_NAND_SKIP_BAD_DOT_I - /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */ - /* ".i" for image -> read skips bad block (no 0xff) */ - else if (cmdtail && !strcmp(cmdtail, ".i")) { - cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ - if (cmd & NANDRW_READ) - cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ - } + /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */ + /* ".i" for image -> read skips bad block (no 0xff) */ + else if (cmdtail && !strcmp (cmdtail, ".i")) { + cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ + if (cmd & NANDRW_READ) + cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ + } #endif /* CFG_NAND_SKIP_BAD_DOT_I */ - else if (cmdtail) { + else if (cmdtail) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + printf ("\nNAND %s: device %d offset %ld, size %ld ...\n", + (cmd & NANDRW_READ) ? "read" : "write", + curr_device, off, size); + + ret = nand_legacy_rw (nand_dev_desc + curr_device, + cmd, off, size, + (size_t *) & total, + (u_char *) addr); + + printf (" %d bytes %s: %s\n", total, + (cmd & NANDRW_READ) ? "read" : "written", + ret ? "ERROR" : "OK"); + + return ret; + } else if (strcmp (argv[1], "erase") == 0 && + (argc == 4 || strcmp ("clean", argv[2]) == 0)) { + int clean = argc == 5; + ulong off = + simple_strtoul (argv[2 + clean], NULL, 16); + ulong size = + simple_strtoul (argv[3 + clean], NULL, 16); + int ret; + + printf ("\nNAND erase: device %d offset %ld, size %ld ...\n", + curr_device, off, size); + + ret = nand_legacy_erase (nand_dev_desc + curr_device, + off, size, clean); + + printf ("%s\n", ret ? "ERROR" : "OK"); + + return ret; + } else { printf ("Usage:\n%s\n", cmdtp->usage); - return 1; + rcode = 1; } - printf ("\nNAND %s: device %d offset %ld, size %ld ...\n", - (cmd & NANDRW_READ) ? "read" : "write", - curr_device, off, size); - - ret = nand_legacy_rw(nand_dev_desc + curr_device, cmd, off, size, - (size_t *)&total, (u_char*)addr); - - printf (" %d bytes %s: %s\n", total, - (cmd & NANDRW_READ) ? "read" : "written", - ret ? "ERROR" : "OK"); - - return ret; - } else if (strcmp(argv[1],"erase") == 0 && - (argc == 4 || strcmp("clean", argv[2]) == 0)) { - int clean = argc == 5; - ulong off = simple_strtoul(argv[2 + clean], NULL, 16); - ulong size = simple_strtoul(argv[3 + clean], NULL, 16); - int ret; - - printf ("\nNAND erase: device %d offset %ld, size %ld ...\n", - curr_device, off, size); - - ret = nand_legacy_erase (nand_dev_desc + curr_device, - off, size, clean); - - printf("%s\n", ret ? "ERROR" : "OK"); - - return ret; - } else { - printf ("Usage:\n%s\n", cmdtp->usage); - rcode = 1; + return rcode; } - - return rcode; - } } U_BOOT_CMD( diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index d98831cb48..f4e5fc504b 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -229,7 +229,7 @@ soft_restart(unsigned long addr) void do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - ulong addr; + ulong addr; /* flush and disable I/D cache */ __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index cfc42c4a83..0d93f2e1ea 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -117,7 +117,7 @@ long int spd_sdram() unsigned sdram_cfg; unsigned int ddrc_ecc_enable; - /* Read SPD parameters with I2C */ + /* Read SPD parameters with I2C */ CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); #ifdef SPD_DEBUG spd_debug(&spd); @@ -147,7 +147,7 @@ long int spd_sdram() spd.ncol_addr); return 0; } - /* Setup DDR chip select register */ + /* Setup DDR chip select register */ #ifdef CFG_83XX_DDR_USES_CS0 ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; ddr->cs_config[0] = ( 1 << 31 @@ -218,13 +218,13 @@ long int spd_sdram() * CAS Lat DDR I Ctrl * Clocks SPD Bit Value * -------+--------+--------- - * 1.0 0 001 - * 1.5 1 010 - * 2.0 2 011 - * 2.5 3 100 - * 3.0 4 101 - * 3.5 5 110 - * 4.0 6 111 + * 1.0 0 001 + * 1.5 1 010 + * 2.0 2 011 + * 2.5 3 100 + * 3.0 4 101 + * 3.5 5 110 + * 4.0 6 111 */ caslat = __ilog2(spd.cas_lat); @@ -442,7 +442,7 @@ long int spd_sdram() /* SS_EN = 0, source synchronous disable * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd - */ + */ ddr->sdram_clk_cntl = 0x00000000; debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds index 2bb4dad8b6..c87469f43d 100644 --- a/doc/README.mpc8360emds +++ b/doc/README.mpc8360emds @@ -103,7 +103,7 @@ Freescale MPC8360EMDS Board Or via tftp: - tftp 10000 u-boot.bin + tftp 10000 u-boot.bin 5.1 Reflash U-boot Image using U-boot diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c index 013aa543db..c5477e0d7e 100644 --- a/drivers/qe/uccf.c +++ b/drivers/qe/uccf.c @@ -46,7 +46,7 @@ u32 ucc_fast_get_qe_cr_subblock(int ucc_num) case 6: return QE_CR_SUBBLOCK_UCCFAST7; case 7: return QE_CR_SUBBLOCK_UCCFAST8; default: return QE_CR_SUBBLOCK_INVALID; - } + } } static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index fedf6361cb..76fd38896a 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -4,11 +4,11 @@ * Author: Shlomi Gridish * * Description: UCC GETH Driver -- PHY handling - * Driver for UEC on QE - * Based on 8260_io/fcc_enet.c + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -30,16 +30,16 @@ #define UEC_VERBOSE_DEBUG #define ugphy_printk(format, arg...) \ - printf(format "\n", ## arg) + printf(format "\n", ## arg) -#define ugphy_dbg(format, arg...) \ - ugphy_printk(format , ## arg) -#define ugphy_err(format, arg...) \ - ugphy_printk(format , ## arg) -#define ugphy_info(format, arg...) \ - ugphy_printk(format , ## arg) -#define ugphy_warn(format, arg...) \ - ugphy_printk(format , ## arg) +#define ugphy_dbg(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_err(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_info(format, arg...) \ + ugphy_printk(format , ## arg) +#define ugphy_warn(format, arg...) \ + ugphy_printk(format , ## arg) #ifdef UEC_VERBOSE_DEBUG #define ugphy_vdbg ugphy_dbg @@ -47,558 +47,561 @@ #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) #endif /* UEC_VERBOSE_DEBUG */ -static void config_genmii_advert(struct uec_mii_info *mii_info); -static void genmii_setup_forced(struct uec_mii_info *mii_info); -static void genmii_restart_aneg(struct uec_mii_info *mii_info); -static int gbit_config_aneg(struct uec_mii_info *mii_info); -static int genmii_config_aneg(struct uec_mii_info *mii_info); -static int genmii_update_link(struct uec_mii_info *mii_info); -static int genmii_read_status(struct uec_mii_info *mii_info); -u16 phy_read(struct uec_mii_info *mii_info, u16 regnum); -void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val); +static void config_genmii_advert (struct uec_mii_info *mii_info); +static void genmii_setup_forced (struct uec_mii_info *mii_info); +static void genmii_restart_aneg (struct uec_mii_info *mii_info); +static int gbit_config_aneg (struct uec_mii_info *mii_info); +static int genmii_config_aneg (struct uec_mii_info *mii_info); +static int genmii_update_link (struct uec_mii_info *mii_info); +static int genmii_read_status (struct uec_mii_info *mii_info); +u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); +void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value) +void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) { - uec_private_t *ugeth = (uec_private_t *)dev->priv; - uec_t *ug_regs; - enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum; - u32 tmp_reg; + uec_private_t *ugeth = (uec_private_t *) dev->priv; + uec_t *ug_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_regs; - /* Stop the MII management read cycle */ - out_be32(&ug_regs->miimcom, 0); - /* Setting up the MII Mangement Address Register */ - tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; - out_be32(&ug_regs->miimadd, tmp_reg); + /* Stop the MII management read cycle */ + out_be32 (&ug_regs->miimcom, 0); + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32 (&ug_regs->miimadd, tmp_reg); - /* Setting up the MII Mangement Control Register with the value */ - out_be32(&ug_regs->miimcon, (u32)value); + /* Setting up the MII Mangement Control Register with the value */ + out_be32 (&ug_regs->miimcon, (u32) value); - /* Wait till MII management write is complete */ - while((in_be32(&ug_regs->miimind)) & MIIMIND_BUSY); + /* Wait till MII management write is complete */ + while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY); - udelay(100000); + udelay (100000); } /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg(struct eth_device *dev, int mii_id, int regnum) +int read_phy_reg (struct eth_device *dev, int mii_id, int regnum) { - uec_private_t *ugeth = (uec_private_t *)dev->priv; - uec_t *ug_regs; - enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum; - u32 tmp_reg; - u16 value; + uec_private_t *ugeth = (uec_private_t *) dev->priv; + uec_t *ug_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; + u16 value; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_regs; - /* Setting up the MII Mangement Address Register */ - tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg ; - out_be32(&ug_regs->miimadd, tmp_reg); + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32 (&ug_regs->miimadd, tmp_reg); - /* Perform an MII management read cycle */ - out_be32(&ug_regs->miimcom, 0); - out_be32(&ug_regs->miimcom, MIIMCOM_READ_CYCLE); + /* Perform an MII management read cycle */ + out_be32 (&ug_regs->miimcom, 0); + out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE); - /* Wait till MII management write is complete */ - while((in_be32(&ug_regs->miimind)) & (MIIMIND_NOT_VALID | MIIMIND_BUSY)); + /* Wait till MII management write is complete */ + while ((in_be32 (&ug_regs->miimind)) & + (MIIMIND_NOT_VALID | MIIMIND_BUSY)); - udelay(100000); + udelay (100000); - /* Read MII management status */ - value = (u16)in_be32(&ug_regs->miimstat); - if(value == 0xffff) - ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x", - mii_id, mii_reg, (u32) &(ug_regs->miimcfg)); + /* Read MII management status */ + value = (u16) in_be32 (&ug_regs->miimstat); + if (value == 0xffff) + ugphy_warn + ("read wrong value : mii_id %d,mii_reg %d, base %08x", + mii_id, mii_reg, (u32) & (ug_regs->miimcfg)); - return (value); + return (value); } -void mii_clear_phy_interrupt(struct uec_mii_info *mii_info) +void mii_clear_phy_interrupt (struct uec_mii_info *mii_info) { - if(mii_info->phyinfo->ack_interrupt) - mii_info->phyinfo->ack_interrupt(mii_info); + if (mii_info->phyinfo->ack_interrupt) + mii_info->phyinfo->ack_interrupt (mii_info); } -void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts) +void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, + u32 interrupts) { - mii_info->interrupts = interrupts; - if(mii_info->phyinfo->config_intr) - mii_info->phyinfo->config_intr(mii_info); + mii_info->interrupts = interrupts; + if (mii_info->phyinfo->config_intr) + mii_info->phyinfo->config_intr (mii_info); } /* Writes MII_ADVERTISE with the appropriate values, after * sanitizing advertise to make sure only supported features * are advertised */ -static void config_genmii_advert(struct uec_mii_info *mii_info) +static void config_genmii_advert (struct uec_mii_info *mii_info) { - u32 advertise; - u16 adv; + u32 advertise; + u16 adv; - /* Only allow advertising what this PHY supports */ - mii_info->advertising &= mii_info->phyinfo->features; - advertise = mii_info->advertising; + /* Only allow advertising what this PHY supports */ + mii_info->advertising &= mii_info->phyinfo->features; + advertise = mii_info->advertising; - /* Setup standard advertisement */ - adv = phy_read(mii_info, PHY_ANAR); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - phy_write(mii_info, PHY_ANAR, adv); + /* Setup standard advertisement */ + adv = phy_read (mii_info, PHY_ANAR); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write (mii_info, PHY_ANAR, adv); } -static void genmii_setup_forced(struct uec_mii_info *mii_info) +static void genmii_setup_forced (struct uec_mii_info *mii_info) { - u16 ctrl; - u32 features = mii_info->phyinfo->features; + u16 ctrl; + u32 features = mii_info->phyinfo->features; - ctrl = phy_read(mii_info, PHY_BMCR); + ctrl = phy_read (mii_info, PHY_BMCR); - ctrl &= ~(PHY_BMCR_DPLX|PHY_BMCR_100_MBPS| - PHY_BMCR_1000_MBPS|PHY_BMCR_AUTON); - ctrl |= PHY_BMCR_RESET; + ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS | + PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON); + ctrl |= PHY_BMCR_RESET; - switch(mii_info->speed) { - case SPEED_1000: - if(features & (SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full)) { - ctrl |= PHY_BMCR_1000_MBPS; - break; - } - mii_info->speed = SPEED_100; - case SPEED_100: - if (features & (SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full)) { - ctrl |= PHY_BMCR_100_MBPS; - break; - } - mii_info->speed = SPEED_10; - case SPEED_10: - if (features & (SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full)) - break; - default: /* Unsupported speed! */ - ugphy_err("%s: Bad speed!", mii_info->dev->name); - break; - } + switch (mii_info->speed) { + case SPEED_1000: + if (features & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + ctrl |= PHY_BMCR_1000_MBPS; + break; + } + mii_info->speed = SPEED_100; + case SPEED_100: + if (features & (SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full)) { + ctrl |= PHY_BMCR_100_MBPS; + break; + } + mii_info->speed = SPEED_10; + case SPEED_10: + if (features & (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full)) + break; + default: /* Unsupported speed! */ + ugphy_err ("%s: Bad speed!", mii_info->dev->name); + break; + } - phy_write(mii_info, PHY_BMCR, ctrl); + phy_write (mii_info, PHY_BMCR, ctrl); } /* Enable and Restart Autonegotiation */ -static void genmii_restart_aneg(struct uec_mii_info *mii_info) +static void genmii_restart_aneg (struct uec_mii_info *mii_info) { - u16 ctl; + u16 ctl; - ctl = phy_read(mii_info, PHY_BMCR); - ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); - phy_write(mii_info, PHY_BMCR, ctl); + ctl = phy_read (mii_info, PHY_BMCR); + ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + phy_write (mii_info, PHY_BMCR, ctl); } -static int gbit_config_aneg(struct uec_mii_info *mii_info) +static int gbit_config_aneg (struct uec_mii_info *mii_info) { - u16 adv; - u32 advertise; + u16 adv; + u32 advertise; - if(mii_info->autoneg) { - /* Configure the ADVERTISE register */ - config_genmii_advert(mii_info); - advertise = mii_info->advertising; + if (mii_info->autoneg) { + /* Configure the ADVERTISE register */ + config_genmii_advert (mii_info); + advertise = mii_info->advertising; - adv = phy_read(mii_info, MII_1000BASETCONTROL); - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(mii_info, MII_1000BASETCONTROL, adv); + adv = phy_read (mii_info, MII_1000BASETCONTROL); + adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | + MII_1000BASETCONTROL_HALFDUPLEXCAP); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; + phy_write (mii_info, MII_1000BASETCONTROL, adv); - /* Start/Restart aneg */ - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); + /* Start/Restart aneg */ + genmii_restart_aneg (mii_info); + } else + genmii_setup_forced (mii_info); - return 0; + return 0; } -static int marvell_config_aneg(struct uec_mii_info *mii_info) +static int marvell_config_aneg (struct uec_mii_info *mii_info) { - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET); + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET); - phy_write(mii_info, 0x1d, 0x1f); - phy_write(mii_info, 0x1e, 0x200c); - phy_write(mii_info, 0x1d, 0x5); - phy_write(mii_info, 0x1e, 0); - phy_write(mii_info, 0x1e, 0x100); + phy_write (mii_info, 0x1d, 0x1f); + phy_write (mii_info, 0x1e, 0x200c); + phy_write (mii_info, 0x1d, 0x5); + phy_write (mii_info, 0x1e, 0); + phy_write (mii_info, 0x1e, 0x100); - gbit_config_aneg(mii_info); + gbit_config_aneg (mii_info); - return 0; + return 0; } -static int genmii_config_aneg(struct uec_mii_info *mii_info) +static int genmii_config_aneg (struct uec_mii_info *mii_info) { - if (mii_info->autoneg) { - config_genmii_advert(mii_info); - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); + if (mii_info->autoneg) { + config_genmii_advert (mii_info); + genmii_restart_aneg (mii_info); + } else + genmii_setup_forced (mii_info); - return 0; + return 0; } -static int genmii_update_link(struct uec_mii_info *mii_info) +static int genmii_update_link (struct uec_mii_info *mii_info) { - u16 status; + u16 status; - /* Do a fake read */ - phy_read(mii_info, PHY_BMSR); + /* Do a fake read */ + phy_read (mii_info, PHY_BMSR); - /* Read link and autonegotiation status */ - status = phy_read(mii_info, PHY_BMSR); - if ((status & PHY_BMSR_LS) == 0) - mii_info->link = 0; - else - mii_info->link = 1; + /* Read link and autonegotiation status */ + status = phy_read (mii_info, PHY_BMSR); + if ((status & PHY_BMSR_LS) == 0) + mii_info->link = 0; + else + mii_info->link = 1; - /* If we are autonegotiating, and not done, - * return an error */ - if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP)) - return -EAGAIN; + /* If we are autonegotiating, and not done, + * return an error */ + if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP)) + return -EAGAIN; - return 0; + return 0; } -static int genmii_read_status(struct uec_mii_info *mii_info) +static int genmii_read_status (struct uec_mii_info *mii_info) { - u16 status; - int err; + u16 status; + int err; - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; + /* Update the link, but return if there + * was an error */ + err = genmii_update_link (mii_info); + if (err) + return err; - if (mii_info->autoneg) { - status = phy_read(mii_info, PHY_ANLPAR); + if (mii_info->autoneg) { + status = phy_read (mii_info, PHY_ANLPAR); - if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - mii_info->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ + if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + mii_info->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ - return 0; + return 0; } -static int marvell_read_status(struct uec_mii_info *mii_info) +static int marvell_read_status (struct uec_mii_info *mii_info) { - u16 status; - int err; + u16 status; + int err; - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; + /* Update the link, but return if there + * was an error */ + err = genmii_update_link (mii_info); + if (err) + return err; - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; - /* Get the duplexity */ - if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; + status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS); - /* Get the speed */ - speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; - switch(speed) { - case MII_M1011_PHY_SPEC_STATUS_1000: - mii_info->speed = SPEED_1000; - break; - case MII_M1011_PHY_SPEC_STATUS_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - mii_info->pause = 0; - } + /* Get the duplexity */ + if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; - return 0; + /* Get the speed */ + speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; + switch (speed) { + case MII_M1011_PHY_SPEC_STATUS_1000: + mii_info->speed = SPEED_1000; + break; + case MII_M1011_PHY_SPEC_STATUS_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + mii_info->pause = 0; + } + + return 0; } -static int marvell_ack_interrupt(struct uec_mii_info *mii_info) +static int marvell_ack_interrupt (struct uec_mii_info *mii_info) { - /* Clear the interrupts by reading the reg */ - phy_read(mii_info, MII_M1011_IEVENT); + /* Clear the interrupts by reading the reg */ + phy_read (mii_info, MII_M1011_IEVENT); - return 0; + return 0; } -static int marvell_config_intr(struct uec_mii_info *mii_info) +static int marvell_config_intr (struct uec_mii_info *mii_info) { - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); - else - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); - return 0; + return 0; } -static int dm9161_init(struct uec_mii_info *mii_info) +static int dm9161_init (struct uec_mii_info *mii_info) { - /* Reset the PHY */ - phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) | - PHY_BMCR_RESET); - /* PHY and MAC connect*/ - phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) & - ~PHY_BMCR_ISO); + /* Reset the PHY */ + phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) | + PHY_BMCR_RESET); + /* PHY and MAC connect */ + phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) & + ~PHY_BMCR_ISO); #ifdef CONFIG_RMII_MODE - phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT); + phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT); #else - phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); #endif - config_genmii_advert(mii_info); - /* Start/restart aneg */ - genmii_config_aneg(mii_info); - /* Delay to wait the aneg compeleted */ - udelay(3000000); + config_genmii_advert (mii_info); + /* Start/restart aneg */ + genmii_config_aneg (mii_info); + /* Delay to wait the aneg compeleted */ + udelay (3000000); - return 0; + return 0; } -static int dm9161_config_aneg(struct uec_mii_info *mii_info) +static int dm9161_config_aneg (struct uec_mii_info *mii_info) { - return 0; + return 0; } -static int dm9161_read_status(struct uec_mii_info *mii_info) +static int dm9161_read_status (struct uec_mii_info *mii_info) { - u16 status; - int err; + u16 status; + int err; - /* Update the link, but return if there was an error*/ - err = genmii_update_link(mii_info); - if (err) - return err; - /* If the link is up, read the speed and duplex - If we aren't autonegotiating assume speeds are as set */ - if (mii_info->autoneg && mii_info->link) { - status = phy_read(mii_info, MII_DM9161_SCSR); - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; + /* Update the link, but return if there was an error */ + err = genmii_update_link (mii_info); + if (err) + return err; + /* If the link is up, read the speed and duplex + If we aren't autonegotiating assume speeds are as set */ + if (mii_info->autoneg && mii_info->link) { + status = phy_read (mii_info, MII_DM9161_SCSR); + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - } + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + } - return 0; + return 0; } -static int dm9161_ack_interrupt(struct uec_mii_info *mii_info) +static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) { - /* Clear the interrupt by reading the reg */ - phy_read(mii_info, MII_DM9161_INTR); + /* Clear the interrupt by reading the reg */ + phy_read (mii_info, MII_DM9161_INTR); - return 0; + return 0; } -static int dm9161_config_intr(struct uec_mii_info *mii_info) +static int dm9161_config_intr (struct uec_mii_info *mii_info) { - if (mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); - else - phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + else + phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); - return 0; + return 0; } -static void dm9161_close(struct uec_mii_info *mii_info) +static void dm9161_close (struct uec_mii_info *mii_info) { } static struct phy_info phy_info_dm9161 = { - .phy_id = 0x0181b880, - .phy_id_mask = 0x0ffffff0, - .name = "Davicom DM9161E", - .init = dm9161_init, - .config_aneg = dm9161_config_aneg, - .read_status = dm9161_read_status, - .close = dm9161_close, + .phy_id = 0x0181b880, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161E", + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .close = dm9161_close, }; static struct phy_info phy_info_dm9161a = { - .phy_id = 0x0181b8a0, - .phy_id_mask = 0x0ffffff0, - .name = "Davicom DM9161A", - .features = MII_BASIC_FEATURES, - .init = dm9161_init, - .config_aneg = dm9161_config_aneg, - .read_status = dm9161_read_status, - .ack_interrupt = dm9161_ack_interrupt, - .config_intr = dm9161_config_intr, - .close = dm9161_close, + .phy_id = 0x0181b8a0, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161A", + .features = MII_BASIC_FEATURES, + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .close = dm9161_close, }; static struct phy_info phy_info_marvell = { - .phy_id = 0x01410c00, - .phy_id_mask = 0xffffff00, - .name = "Marvell 88E11x1", - .features = MII_GBIT_FEATURES, - .config_aneg = &marvell_config_aneg, - .read_status = &marvell_read_status, - .ack_interrupt = &marvell_ack_interrupt, - .config_intr = &marvell_config_intr, + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E11x1", + .features = MII_GBIT_FEATURES, + .config_aneg = &marvell_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, }; -static struct phy_info phy_info_genmii= { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .features = MII_BASIC_FEATURES, - .config_aneg = genmii_config_aneg, - .read_status = genmii_read_status, +static struct phy_info phy_info_genmii = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .features = MII_BASIC_FEATURES, + .config_aneg = genmii_config_aneg, + .read_status = genmii_read_status, }; static struct phy_info *phy_info[] = { - &phy_info_dm9161, - &phy_info_dm9161a, - &phy_info_marvell, - &phy_info_genmii, - NULL + &phy_info_dm9161, + &phy_info_dm9161a, + &phy_info_marvell, + &phy_info_genmii, + NULL }; -u16 phy_read(struct uec_mii_info *mii_info, u16 regnum) +u16 phy_read (struct uec_mii_info *mii_info, u16 regnum) { - return mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); + return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum); } -void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val) +void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) { - mii_info->mdio_write(mii_info->dev, - mii_info->mii_id, - regnum, val); + mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val); } /* Use the PHY ID registers to determine what type of PHY is attached * to device dev. return a struct phy_info structure describing that PHY */ -struct phy_info * get_phy_info(struct uec_mii_info *mii_info) +struct phy_info *get_phy_info (struct uec_mii_info *mii_info) { - u16 phy_reg; - u32 phy_ID; - int i; - struct phy_info *theInfo = NULL; + u16 phy_reg; + u32 phy_ID; + int i; + struct phy_info *theInfo = NULL; - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read(mii_info, PHY_PHYIDR1); - phy_ID = (phy_reg & 0xffff) << 16; + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = phy_read (mii_info, PHY_PHYIDR1); + phy_ID = (phy_reg & 0xffff) << 16; - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read(mii_info, PHY_PHYIDR2); - phy_ID |= (phy_reg & 0xffff); + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = phy_read (mii_info, PHY_PHYIDR2); + phy_ID |= (phy_reg & 0xffff); - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) - if (phy_info[i]->phy_id == - (phy_ID & phy_info[i]->phy_id_mask)) { - theInfo = phy_info[i]; - break; - } + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) + if (phy_info[i]->phy_id == + (phy_ID & phy_info[i]->phy_id_mask)) { + theInfo = phy_info[i]; + break; + } - /* This shouldn't happen, as we have generic PHY support */ - if (theInfo == NULL) { - ugphy_info("UEC: PHY id %x is not supported!", phy_ID); - return NULL; - } else { - ugphy_info("UEC: PHY is %s (%x)", theInfo->name, phy_ID); - } + /* This shouldn't happen, as we have generic PHY support */ + if (theInfo == NULL) { + ugphy_info ("UEC: PHY id %x is not supported!", phy_ID); + return NULL; + } else { + ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID); + } - return theInfo; + return theInfo; } -void marvell_phy_interface_mode(struct eth_device *dev, enet_interface_e mode) +void marvell_phy_interface_mode (struct eth_device *dev, + enet_interface_e mode) { - uec_private_t *uec = (uec_private_t *)dev->priv; - struct uec_mii_info *mii_info; + uec_private_t *uec = (uec_private_t *) dev->priv; + struct uec_mii_info *mii_info; if (!uec->mii_info) { - printf("%s: the PHY not intialized\n", __FUNCTION__); + printf ("%s: the PHY not intialized\n", __FUNCTION__); return; } mii_info = uec->mii_info; if (mode == ENET_100_RGMII) { - phy_write(mii_info, 0x00, 0x9140); - phy_write(mii_info, 0x1d, 0x001f); - phy_write(mii_info, 0x1e, 0x200c); - phy_write(mii_info, 0x1d, 0x0005); - phy_write(mii_info, 0x1e, 0x0000); - phy_write(mii_info, 0x1e, 0x0100); - phy_write(mii_info, 0x09, 0x0e00); - phy_write(mii_info, 0x04, 0x01e1); - phy_write(mii_info, 0x00, 0x9140); - phy_write(mii_info, 0x00, 0x1000); - udelay(100000); - phy_write(mii_info, 0x00, 0x2900); - phy_write(mii_info, 0x14, 0x0cd2); - phy_write(mii_info, 0x00, 0xa100); - phy_write(mii_info, 0x09, 0x0000); - phy_write(mii_info, 0x1b, 0x800b); - phy_write(mii_info, 0x04, 0x05e1); - phy_write(mii_info, 0x00, 0xa100); - phy_write(mii_info, 0x00, 0x2100); - udelay(1000000); + phy_write (mii_info, 0x00, 0x9140); + phy_write (mii_info, 0x1d, 0x001f); + phy_write (mii_info, 0x1e, 0x200c); + phy_write (mii_info, 0x1d, 0x0005); + phy_write (mii_info, 0x1e, 0x0000); + phy_write (mii_info, 0x1e, 0x0100); + phy_write (mii_info, 0x09, 0x0e00); + phy_write (mii_info, 0x04, 0x01e1); + phy_write (mii_info, 0x00, 0x9140); + phy_write (mii_info, 0x00, 0x1000); + udelay (100000); + phy_write (mii_info, 0x00, 0x2900); + phy_write (mii_info, 0x14, 0x0cd2); + phy_write (mii_info, 0x00, 0xa100); + phy_write (mii_info, 0x09, 0x0000); + phy_write (mii_info, 0x1b, 0x800b); + phy_write (mii_info, 0x04, 0x05e1); + phy_write (mii_info, 0x00, 0xa100); + phy_write (mii_info, 0x00, 0x2100); + udelay (1000000); } else if (mode == ENET_10_RGMII) { - phy_write(mii_info, 0x14, 0x8e40); - phy_write(mii_info, 0x1b, 0x800b); - phy_write(mii_info, 0x14, 0x0c82); - phy_write(mii_info, 0x00, 0x8100); - udelay(1000000); + phy_write (mii_info, 0x14, 0x8e40); + phy_write (mii_info, 0x1b, 0x800b); + phy_write (mii_info, 0x14, 0x0c82); + phy_write (mii_info, 0x00, 0x8100); + udelay (1000000); } } -void change_phy_interface_mode(struct eth_device *dev, enet_interface_e mode) +void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode) { #ifdef CONFIG_PHY_MODE_NEED_CHANGE - marvell_phy_interface_mode(dev, mode); + marvell_phy_interface_mode (dev, mode); #endif } #endif /* CONFIG_QE */ diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h index a82f1f5893..9bd926ddd5 100644 --- a/drivers/qe/uec_phy.h +++ b/drivers/qe/uec_phy.h @@ -4,11 +4,11 @@ * Author: Shlomi Gridish * * Description: UCC ethernet driver -- PHY handling - * Driver for UEC on QE - * Based on 8260_io/fcc_enet.c + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -19,37 +19,37 @@ #define MII_end ((u32)-2) #define MII_read ((u32)-1) -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 -#define UGETH_AN_TIMEOUT 2000 +#define UGETH_AN_TIMEOUT 2000 /* 1000BT control (Marvell & BCM54xx at least) */ -#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL 0x09 #define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 #define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 /* Cicada Extended Control Register 1 */ -#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXT_CON1 0x17 #define MII_CIS8201_EXTCON1_INIT 0x0000 /* Cicada Interrupt Mask Register */ -#define MII_CIS8201_IMASK 0x19 -#define MII_CIS8201_IMASK_IEN 0x8000 -#define MII_CIS8201_IMASK_SPEED 0x4000 -#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 #define MII_CIS8201_IMASK_DUPLEX 0x1000 -#define MII_CIS8201_IMASK_MASK 0xf000 +#define MII_CIS8201_IMASK_MASK 0xf000 /* Cicada Interrupt Status Register */ -#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT 0x1a #define MII_CIS8201_ISTAT_STATUS 0x8000 -#define MII_CIS8201_ISTAT_SPEED 0x4000 -#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 #define MII_CIS8201_ISTAT_DUPLEX 0x1000 /* Cicada Auxiliary Control/Status Register */ -#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUX_CONSTAT 0x1c #define MII_CIS8201_AUXCONSTAT_INIT 0x0004 #define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 #define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 @@ -57,155 +57,156 @@ #define MII_CIS8201_AUXCONSTAT_100 0x0008 /* 88E1011 PHY Status Register */ -#define MII_M1011_PHY_SPEC_STATUS 0x11 -#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 -#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 -#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 -#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 -#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 -#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 -#define MII_M1011_IEVENT 0x13 -#define MII_M1011_IEVENT_CLEAR 0x0000 +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 -#define MII_M1011_IMASK 0x12 -#define MII_M1011_IMASK_INIT 0x6400 -#define MII_M1011_IMASK_CLEAR 0x0000 +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 -#define MII_DM9161_SCR 0x10 -#define MII_DM9161_SCR_INIT 0x0610 +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 #define MII_DM9161_SCR_RMII_INIT 0x0710 /* DM9161 Specified Configuration and Status Register */ -#define MII_DM9161_SCSR 0x11 -#define MII_DM9161_SCSR_100F 0x8000 -#define MII_DM9161_SCSR_100H 0x4000 -#define MII_DM9161_SCSR_10F 0x2000 -#define MII_DM9161_SCSR_10H 0x1000 +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 /* DM9161 Interrupt Register */ -#define MII_DM9161_INTR 0x15 -#define MII_DM9161_INTR_PEND 0x8000 -#define MII_DM9161_INTR_DPLX_MASK 0x0800 -#define MII_DM9161_INTR_SPD_MASK 0x0400 -#define MII_DM9161_INTR_LINK_MASK 0x0200 -#define MII_DM9161_INTR_MASK 0x0100 -#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 -#define MII_DM9161_INTR_SPD_CHANGE 0x0008 -#define MII_DM9161_INTR_LINK_CHANGE 0x0004 -#define MII_DM9161_INTR_INIT 0x0000 -#define MII_DM9161_INTR_STOP \ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ (MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) /* DM9161 10BT Configuration/Status */ -#define MII_DM9161_10BTCSR 0x12 -#define MII_DM9161_10BTCSR_INIT 0x7800 +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 #define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ - SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | \ - SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | \ - SUPPORTED_TP | \ - SUPPORTED_MII) + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) #define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | \ - SUPPORTED_1000baseT_Full) + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) -#define MII_READ_COMMAND 0x00000001 +#define MII_READ_COMMAND 0x00000001 -#define MII_INTERRUPT_DISABLED 0x0 -#define MII_INTERRUPT_ENABLED 0x1 +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 /* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 /* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_RESV 0x1c00 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) + ADVERTISE_CSMA) #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Taken from mii_if_info and sungem_phy.h */ struct uec_mii_info { - /* Information about the PHY type */ - /* And management functions */ - struct phy_info *phyinfo; + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; - struct eth_device *dev; + struct eth_device *dev; - /* forced speed & duplex (no autoneg) - * partner speed & duplex & pause (autoneg) - */ - int speed; - int duplex; - int pause; + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; - /* The most recently read link state */ - int link; + /* The most recently read link state */ + int link; - /* Enabled Interrupts */ - u32 interrupts; + /* Enabled Interrupts */ + u32 interrupts; - u32 advertising; - int autoneg; - int mii_id; + u32 advertising; + int autoneg; + int mii_id; - /* private data pointer */ - /* For use by PHYs to maintain extra state */ - void *priv; + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; - /* Provided by ethernet driver */ - int (*mdio_read) (struct eth_device *dev, int mii_id, int reg); - void (*mdio_write) (struct eth_device *dev, int mii_id, int reg, int val); + /* Provided by ethernet driver */ + int (*mdio_read) (struct eth_device * dev, int mii_id, int reg); + void (*mdio_write) (struct eth_device * dev, int mii_id, int reg, + int val); }; /* struct phy_info: a structure which defines attributes for a PHY @@ -221,36 +222,38 @@ struct uec_mii_info { * Each PHY must declare config_aneg, and read_status. */ struct phy_info { - u32 phy_id; - char *name; - unsigned int phy_id_mask; - u32 features; + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; - /* Called to initialize the PHY */ - int (*init)(struct uec_mii_info *mii_info); + /* Called to initialize the PHY */ + int (*init) (struct uec_mii_info * mii_info); - /* Called to suspend the PHY for power */ - int (*suspend)(struct uec_mii_info *mii_info); + /* Called to suspend the PHY for power */ + int (*suspend) (struct uec_mii_info * mii_info); - /* Reconfigures autonegotiation (or disables it) */ - int (*config_aneg)(struct uec_mii_info *mii_info); + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg) (struct uec_mii_info * mii_info); - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct uec_mii_info *mii_info); + /* Determines the negotiated speed and duplex */ + int (*read_status) (struct uec_mii_info * mii_info); - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct uec_mii_info *mii_info); + /* Clears any pending interrupts */ + int (*ack_interrupt) (struct uec_mii_info * mii_info); - /* Enables or disables interrupts */ - int (*config_intr)(struct uec_mii_info *mii_info); + /* Enables or disables interrupts */ + int (*config_intr) (struct uec_mii_info * mii_info); - /* Clears up any memory if needed */ - void (*close)(struct uec_mii_info *mii_info); + /* Clears up any memory if needed */ + void (*close) (struct uec_mii_info * mii_info); }; -struct phy_info *get_phy_info(struct uec_mii_info *mii_info); -void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value); -int read_phy_reg(struct eth_device *dev, int mii_id, int regnum); -void mii_clear_phy_interrupt(struct uec_mii_info *mii_info); -void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts); +struct phy_info *get_phy_info (struct uec_mii_info *mii_info); +void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, + int value); +int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); +void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, + u32 interrupts); #endif /* __UEC_PHY_H__ */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 2a76a05c6c..43cde5e28e 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -5,18 +5,18 @@ * * History : * 20060601: Daveliu (daveliu@freescale.com) - * TanyaJiang (tanya.jiang@freescale.com) - * Unified variable names for mpc83xx - * 2005 : Mandy Lavi (mandy.lavi@freescale.com) - * support for mpc8360e - * 2004 : Eran Liberty (liberty@freescale.com) - * Initialized for mpc8349 - * based on: - * MPC8260 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * MPC85xx Internal Memory Map - * Copyright(c) 2002,2003 Motorola Inc. - * Xianghua Xiao (x.xiao@motorola.com) + * TanyaJiang (tanya.jiang@freescale.com) + * Unified variable names for mpc83xx + * 2005 : Mandy Lavi (mandy.lavi@freescale.com) + * support for mpc8360e + * 2004 : Eran Liberty (liberty@freescale.com) + * Initialized for mpc8349 + * based on: + * MPC8260 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * MPC85xx Internal Memory Map + * Copyright(c) 2002,2003 Motorola Inc. + * Xianghua Xiao (x.xiao@motorola.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -25,7 +25,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -50,7 +50,7 @@ typedef struct law83xx { * access window n. The specified base address should be aligned to the * window size, as defined by LBLAWARn[SIZE]. */ -#define LAWBAR_BAR 0xFFFFF000 +#define LAWBAR_BAR 0xFFFFF000 #define LAWBAR_RES ~(LAWBAR_BAR) u32 ar; /* LBIU local access window attribute register */ } law83xx_t; @@ -66,7 +66,7 @@ typedef struct sysconf83xx { * address used for boot sequencer configuration accesses. */ #define ALTCBAR_BASE_ADDR 0xFFF00000 -#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ +#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ u8 res1[0x14]; law83xx_t lblaw[4]; /* LBIU local access window */ u8 res2[0x20]; @@ -77,8 +77,8 @@ typedef struct sysconf83xx { u32 sgprl; /* System General Purpose Register Low */ u32 sgprh; /* System General Purpose Register High */ u32 spridr; /* System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ +#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ u8 res5[0x04]; u32 spcr; /* System Priority Configuration Register */ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ @@ -184,7 +184,7 @@ typedef struct sysconf83xx { #define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ #define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ #define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ - SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) + SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) #endif u8 res6[0xE4]; } sysconf83xx_t; @@ -211,9 +211,9 @@ typedef struct rtclk83xx { u32 cnr; /* control register */ #define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ #define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ -#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ -#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ -#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) +#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ +#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ +#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) u32 ldr; /* load register */ #define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be * loaded in a 32-bit RTC counter.*/ @@ -240,11 +240,11 @@ typedef struct gtm83xx { #define CFR1_PCAS 0x80 /* Pair Cascade mode */ #define CFR1_BCM 0x40 /* Backward compatible mode */ #define CFR1_STP2 0x20 /* Stop timer */ -#define CFR1_RST2 0x10 /* Reset timer */ -#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ -#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ +#define CFR1_RST2 0x10 /* Reset timer */ +#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ +#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ #define CFR1_STP1 0x02 /* Stop timer */ -#define CFR1_RST1 0x01 /* Reset timer */ +#define CFR1_RST1 0x01 /* Reset timer */ #define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ CFR1_GM1 | CFR1_STP1 | CFR1_RST1) u8 res0[3]; @@ -252,29 +252,29 @@ typedef struct gtm83xx { #define CFR2_PCAS 0x80 /* Pair Cascade mode */ #define CFR2_SCAS 0x40 /* Super Cascade mode */ #define CFR2_STP4 0x20 /* Stop timer */ -#define CFR2_RST4 0x10 /* Reset timer */ -#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ -#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ +#define CFR2_RST4 0x10 /* Reset timer */ +#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ +#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ #define CFR2_STP3 0x02 /* Stop timer */ -#define CFR2_RST3 0x01 /* Reset timer */ +#define CFR2_RST3 0x01 /* Reset timer */ u8 res1[10]; - u16 mdr1; /* Timer1 Mode Register */ -#define MDR_SPS 0xff00 /* Secondary Prescaler value */ -#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ -#define MDR_OM 0x0020 /* Output mode */ -#define MDR_ORI 0x0010 /* Output reference interrupt enable */ -#define MDR_FRR 0x0008 /* Free run/restart */ + u16 mdr1; /* Timer1 Mode Register */ +#define MDR_SPS 0xff00 /* Secondary Prescaler value */ +#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ +#define MDR_OM 0x0020 /* Output mode */ +#define MDR_ORI 0x0010 /* Output reference interrupt enable */ +#define MDR_FRR 0x0008 /* Free run/restart */ #define MDR_ICLK 0x0006 /* Input clock source for the timer */ -#define MDR_GE 0x0001 /* Gate enable */ - u16 mdr2; /* Timer2 Mode Register */ +#define MDR_GE 0x0001 /* Gate enable */ + u16 mdr2; /* Timer2 Mode Register */ u16 rfr1; /* Timer1 Reference Register */ u16 rfr2; /* Timer2 Reference Register */ u16 cpr1; /* Timer1 Capture Register */ u16 cpr2; /* Timer2 Capture Register */ u16 cnr1; /* Timer1 Counter Register */ u16 cnr2; /* Timer2 Counter Register */ - u16 mdr3; /* Timer3 Mode Register */ - u16 mdr4; /* Timer4 Mode Register */ + u16 mdr3; /* Timer3 Mode Register */ + u16 mdr4; /* Timer4 Mode Register */ u16 rfr3; /* Timer3 Reference Register */ u16 rfr4; /* Timer4 Reference Register */ u16 cpr3; /* Timer3 Capture Register */ @@ -302,7 +302,7 @@ typedef struct gtm83xx { */ typedef struct ipic83xx { u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ -#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ +#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ #define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ #define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ #define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ @@ -313,28 +313,28 @@ typedef struct ipic83xx { #define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ #define SICVR_IVEC 0x0000007f /* Interrupt vector */ #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) - u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ + u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ #if defined (CONFIG_MPC8349) -#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ -#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ -#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ -#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ -#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ -#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ -#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ -#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ +#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ +#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ +#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ +#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ +#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ +#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ +#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ +#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ #endif #if defined (CONFIG_MPC8360) #define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ #define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ #endif -#define SIIH_UART1 0x00000080 /* UART1 interrupt */ -#define SIIH_UART2 0x00000040 /* UART2 interrupt */ -#define SIIH_SEC 0x00000020 /* SEC interrupt */ -#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ -#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ +#define SIIH_UART1 0x00000080 /* UART1 interrupt */ +#define SIIH_UART2 0x00000040 /* UART2 interrupt */ +#define SIIH_SEC 0x00000020 /* SEC interrupt */ +#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ +#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ #if defined (CONFIG_MPC8349) -#define SIIH_SPI 0x00000001 /* SPI interrupt */ +#define SIIH_SPI 0x00000001 /* SPI interrupt */ #define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ @@ -345,15 +345,15 @@ typedef struct ipic83xx { #define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) #endif - u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ + u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ #define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ #define SIIL_PIT 0x40000000 /* PIT interrupt */ #define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ #if defined (CONFIG_MPC8349) #define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ #endif -#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ -#define SIIL_MU 0x04000000 /* Message Unit interrupt */ +#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ +#define SIIL_MU 0x04000000 /* Message Unit interrupt */ #define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ #define SIIL_DMA 0x01000000 /* DMA interrupt */ #define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ @@ -363,7 +363,7 @@ typedef struct ipic83xx { #define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ #endif #if defined (CONFIG_MPC8360) -#define SIIL_QEP 0x00200000 /* QE ports interrupt */ +#define SIIL_QEP 0x00200000 /* QE ports interrupt */ #define SIIL_SDDR 0x00100000 /* SDDR interrupt */ #endif #define SIIL_DDR 0x00080000 /* DDR interrupt */ @@ -375,7 +375,7 @@ typedef struct ipic83xx { #define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ #define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ #define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ -#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ #if defined (CONFIG_MPC8349) #define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ @@ -385,9 +385,9 @@ typedef struct ipic83xx { | SIIL_GTM5 |SIIL_DPTC ) #endif #if defined (CONFIG_MPC8360) -#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ +#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ - |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ + |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ |SIIL_GTM5 ) #endif @@ -423,23 +423,23 @@ typedef struct ipic83xx { | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ | SEI_SIRQ0) u32 secnr; /* System External Interrupt Control Register (SECNR) */ -#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ -#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ -#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ -#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ -#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ -#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ -#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ -#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ -#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ -#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ -#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ -#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ +#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ +#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ +#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ +#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ +#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ +#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ +#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ +#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ +#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ +#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ +#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ +#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ #define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \ | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) - u32 sersr; /* System Error Status Register (SERR) */ + u32 sersr; /* System Error Status Register (SERR) */ u32 sermr; /* System Error Mask Register (SERR) */ #define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ #define SERR_WDT 0x40000000 /* WDT MCP request */ @@ -455,15 +455,15 @@ typedef struct ipic83xx { #define SERR_CMEE 0x08000000 /* CMEEMCP request */ #define SERR_PCI 0x04000000 /* PCI MCP request */ #endif -#define SERR_MU 0x01000000 /* MU MCP request */ +#define SERR_MU 0x01000000 /* MU MCP request */ #define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ #if defined (CONFIG_MPC8349) #define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ |SERR_RNC ) #elif defined (CONFIG_MPC8360) -#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ - |SERR_CMEE|SERR_PCI|SERR_MU) +#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ + |SERR_CMEE|SERR_PCI|SERR_MU) #endif u32 sercr; /* System Error Control Register (SERCR) */ #define SERCR_MCPR 0x00000001 /* MCP Route */ @@ -472,7 +472,7 @@ typedef struct ipic83xx { u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ u32 sefcr; /* System External Interrupt Force Register (SEI) */ - u32 serfr; /* System Error Force Register (SERR) */ + u32 serfr; /* System Error Force Register (SERR) */ u32 scvcr; /* System Critical Interrupt Vector Register */ #define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible critical interrupt vector. */ @@ -506,7 +506,7 @@ typedef struct arbiter83xx { #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) u32 atr; /* Arbiter Timers Register */ #define ATR_DTO 0x00FF0000 /* Data time out. */ -#define ATR_ATO 0x000000FF /* Address time out. */ +#define ATR_ATO 0x000000FF /* Address time out. */ #define ATR_RES ~(ATR_DTO|ATR_ATO) u8 res[4]; u32 aer; /* Arbiter Event Register (AE) */ @@ -523,9 +523,9 @@ typedef struct arbiter83xx { u32 aerr; /* Arbiter Event Response Register (AE) */ #define AE_ETEA 0x00000020 /* Transfer error. */ #define AE_RES_ 0x00000010 /* Reserved transfer type. */ -#define AE_ECW 0x00000008 /* External control word transfer type. */ -#define AE_AO 0x00000004 /* Address Only transfer type. */ -#define AE_DTO 0x00000002 /* Data time out. */ +#define AE_ECW 0x00000008 /* External control word transfer type. */ +#define AE_AO 0x00000004 /* Address Only transfer type. */ +#define AE_DTO 0x00000002 /* Data time out. */ #define AE_ATO 0x00000001 /* Address time out. */ #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) u8 res1[0xDC]; @@ -536,21 +536,21 @@ typedef struct arbiter83xx { */ typedef struct reset83xx { u32 rcwl; /* RCWL Register */ -#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ +#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ #define RCWL_LBIUCM_SHIFT 31 -#define RCWL_DDRCM 0x40000000 /* DDRCM */ +#define RCWL_DDRCM 0x40000000 /* DDRCM */ #define RCWL_DDRCM_SHIFT 30 #if defined (CONFIG_MPC8349) -#define RCWL_SVCOD 0x30000000 /* SVCOD */ +#define RCWL_SVCOD 0x30000000 /* SVCOD */ #endif -#define RCWL_SPMF 0x0f000000 /* SPMF */ -#define RCWL_SPMF_SHIFT 24 -#define RCWL_COREPLL 0x007F0000 /* COREPLL */ +#define RCWL_SPMF 0x0f000000 /* SPMF */ +#define RCWL_SPMF_SHIFT 24 +#define RCWL_COREPLL 0x007F0000 /* COREPLL */ #define RCWL_COREPLL_SHIFT 16 -#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ -#define RCWL_CEPDF 0x00000020 /* CEPDF */ +#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ +#define RCWL_CEPDF 0x00000020 /* CEPDF */ #define RCWL_CEPDF_SHIFT 5 -#define RCWL_CEPMF 0x0000001F /* CEPMF */ +#define RCWL_CEPMF 0x0000001F /* CEPMF */ #define RCWL_CEPMF_SHIFT 0 #if defined (CONFIG_MPC8349) #define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) @@ -558,30 +558,30 @@ typedef struct reset83xx { #define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) #endif u32 rcwh; /* RCHL Register */ -#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ #define RCWH_PCIHOST_SHIFT 31 #if defined (CONFIG_MPC8349) -#define RCWH_PCI64 0x40000000 /* PCI64 */ -#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ -#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ +#define RCWH_PCI64 0x40000000 /* PCI64 */ +#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ +#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ #elif defined (CONFIG_MPC8360) #define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ #define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ #endif -#define RCWH_COREDIS 0x08000000 /* COREDIS */ -#define RCWH_BMS 0x04000000 /* BMS */ -#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ -#define RCWH_SWEN 0x00800000 /* SWEN */ -#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ +#define RCWH_COREDIS 0x08000000 /* COREDIS */ +#define RCWH_BMS 0x04000000 /* BMS */ +#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ +#define RCWH_SWEN 0x00800000 /* SWEN */ +#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ #if defined (CONFIG_MPC8349) -#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ -#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ -#define RCWH_TPR 0x00000100 /* TPR */ +#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ +#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ +#define RCWH_TPR 0x00000100 /* TPR */ #elif defined (CONFIG_MPC8360) #define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ #endif -#define RCWH_TLE 0x00000008 /* TLE */ -#define RCWH_LALE 0x00000004 /* LALE */ +#define RCWH_TLE 0x00000008 /* TLE */ +#define RCWH_LALE 0x00000004 /* LALE */ #if defined (CONFIG_MPC8349) #define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ @@ -595,58 +595,58 @@ typedef struct reset83xx { #endif u8 res0[8]; u32 rsr; /* Reset status Register */ -#define RSR_RSTSRC 0xE0000000 /* Reset source */ +#define RSR_RSTSRC 0xE0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 29 -#define RSR_BSF 0x00010000 /* Boot seq. fail */ -#define RSR_BSF_SHIFT 16 -#define RSR_SWSR 0x00002000 /* software soft reset */ -#define RSR_SWSR_SHIFT 13 -#define RSR_SWHR 0x00001000 /* software hard reset */ -#define RSR_SWHR_SHIFT 12 -#define RSR_JHRS 0x00000200 /* jtag hreset */ -#define RSR_JHRS_SHIFT 9 +#define RSR_BSF 0x00010000 /* Boot seq. fail */ +#define RSR_BSF_SHIFT 16 +#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWSR_SHIFT 13 +#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_SWHR_SHIFT 12 +#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JHRS_SHIFT 9 #define RSR_JSRS 0x00000100 /* jtag sreset status */ -#define RSR_JSRS_SHIFT 8 +#define RSR_JSRS_SHIFT 8 #define RSR_CSHR 0x00000010 /* checkstop reset status */ -#define RSR_CSHR_SHIFT 4 +#define RSR_CSHR_SHIFT 4 #define RSR_SWRS 0x00000008 /* software watchdog reset status */ -#define RSR_SWRS_SHIFT 3 +#define RSR_SWRS_SHIFT 3 #define RSR_BMRS 0x00000004 /* bus monitop reset status */ -#define RSR_BMRS_SHIFT 2 -#define RSR_SRS 0x00000002 /* soft reset status */ -#define RSR_SRS_SHIFT 1 -#define RSR_HRS 0x00000001 /* hard reset status */ -#define RSR_HRS_SHIFT 0 +#define RSR_BMRS_SHIFT 2 +#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_SRS_SHIFT 1 +#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_HRS_SHIFT 0 #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) - u32 rmr; /* Reset mode Register */ + u32 rmr; /* Reset mode Register */ #define RMR_CSRE 0x00000001 /* checkstop reset enable */ -#define RMR_CSRE_SHIFT 0 +#define RMR_CSRE_SHIFT 0 #define RMR_RES ~(RMR_CSRE) u32 rpr; /* Reset protection Register */ u32 rcr; /* Reset Control Register */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ #define RCR_RES ~(RCR_SWHR | RCR_SWSR) u32 rcer; /* Reset Control Enable Register */ -#define RCER_CRE 0x00000001 /* software hard reset */ +#define RCER_CRE 0x00000001 /* software hard reset */ #define RCER_RES ~(RCER_CRE) u8 res1[0xDC]; } reset83xx_t; typedef struct clk83xx { u32 spmr; /* system PLL mode Register */ -#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ -#define SPMR_DDRCM 0x40000000 /* DDRCM */ +#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ +#define SPMR_DDRCM 0x40000000 /* DDRCM */ #if defined (CONFIG_MPC8349) -#define SPMR_SVCOD 0x30000000 /* SVCOD */ +#define SPMR_SVCOD 0x30000000 /* SVCOD */ #endif -#define SPMR_SPMF 0x0F000000 /* SPMF */ -#define SPMR_CKID 0x00800000 /* CKID */ +#define SPMR_SPMF 0x0F000000 /* SPMF */ +#define SPMR_CKID 0x00800000 /* CKID */ #define SPMR_CKID_SHIFT 23 -#define SPMR_COREPLL 0x007F0000 /* COREPLL */ -#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ -#define SPMR_CEPDF 0x00000020 /* CEPDF */ -#define SPMR_CEPMF 0x0000001F /* CEPMF */ +#define SPMR_COREPLL 0x007F0000 /* COREPLL */ +#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ +#define SPMR_CEPDF 0x00000020 /* CEPDF */ +#define SPMR_CEPMF 0x0000001F /* CEPMF */ #if defined (CONFIG_MPC8349) #define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ @@ -657,27 +657,27 @@ typedef struct clk83xx { | SPMR_CEPDF | SPMR_CEPMF) #endif u32 occr; /* output clock control Register */ -#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ -#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ -#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ +#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ +#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ +#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ #if defined (CONFIG_MPC8349) -#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ -#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ -#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ -#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ -#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ +#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ +#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ +#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ +#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ +#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ #endif -#define OCCR_PCICD0 0x00800000 /* PCICD0 */ -#define OCCR_PCICD1 0x00400000 /* PCICD1 */ -#define OCCR_PCICD2 0x00200000 /* PCICD2 */ +#define OCCR_PCICD0 0x00800000 /* PCICD0 */ +#define OCCR_PCICD1 0x00400000 /* PCICD1 */ +#define OCCR_PCICD2 0x00200000 /* PCICD2 */ #if defined (CONFIG_MPC8349) -#define OCCR_PCICD3 0x00100000 /* PCICD3 */ -#define OCCR_PCICD4 0x00080000 /* PCICD4 */ -#define OCCR_PCICD5 0x00040000 /* PCICD5 */ -#define OCCR_PCICD6 0x00020000 /* PCICD6 */ -#define OCCR_PCICD7 0x00010000 /* PCICD7 */ -#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ -#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ +#define OCCR_PCICD3 0x00100000 /* PCICD3 */ +#define OCCR_PCICD4 0x00080000 /* PCICD4 */ +#define OCCR_PCICD5 0x00040000 /* PCICD5 */ +#define OCCR_PCICD6 0x00020000 /* PCICD6 */ +#define OCCR_PCICD7 0x00010000 /* PCICD7 */ +#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ +#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ #define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \ | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \ | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \ @@ -724,7 +724,7 @@ typedef struct pmc83xx { #define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ #define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ #if defined (CONFIG_MPC8360) -#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ +#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ #define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) #elif defined (CONFIG_MPC8349) #define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) @@ -733,7 +733,7 @@ typedef struct pmc83xx { #define PMCER_PMCI 0x00000001 /* PMC Interrupt */ #define PMCER_RES ~(PMCER_PMCI) u32 pmcmr; /* PMC Mask Register */ -#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ +#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ #define PMCMR_RES ~(PMCMR_PMCIE) u8 res0[0xF4]; } pmc83xx_t; @@ -919,9 +919,9 @@ typedef struct qesba83xx { typedef struct ddr_cs_bnds { u32 csbnds; #define CSBNDS_SA 0x00FF0000 -#define CSBNDS_SA_SHIFT 8 +#define CSBNDS_SA_SHIFT 8 #define CSBNDS_EA 0x000000FF -#define CSBNDS_EA_SHIFT 24 +#define CSBNDS_EA_SHIFT 24 u8 res0[4]; } ddr_cs_bnds_t; @@ -929,8 +929,8 @@ typedef struct ddr83xx { ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ u8 res0[0x60]; u32 cs_config[4]; /**< Chip Select x Configuration */ -#define CSCONFIG_EN 0x80000000 -#define CSCONFIG_AP 0x00800000 +#define CSCONFIG_EN 0x80000000 +#define CSCONFIG_AP 0x00800000 #define CSCONFIG_ROW_BIT 0x00000700 #define CSCONFIG_ROW_BIT_12 0x00000000 #define CSCONFIG_ROW_BIT_13 0x00000100 @@ -953,7 +953,7 @@ typedef struct ddr83xx { #define TIMING_CFG1_REFREC 0x0000F000 #define TIMING_CFG1_REFREC_SHIFT 12 #define TIMING_CFG1_WRREC 0x00000700 -#define TIMING_CFG1_WRREC_SHIFT 8 +#define TIMING_CFG1_WRREC_SHIFT 8 #define TIMING_CFG1_ACTTOACT 0x00000070 #define TIMING_CFG1_ACTTOACT_SHIFT 4 #define TIMING_CFG1_WRTORD 0x00000007 @@ -962,25 +962,25 @@ typedef struct ddr83xx { #define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ -#define TIMING_CFG2_CPO 0x0F000000 -#define TIMING_CFG2_CPO_SHIFT 24 -#define TIMING_CFG2_ACSM 0x00080000 +#define TIMING_CFG2_CPO 0x0F000000 +#define TIMING_CFG2_CPO_SHIFT 24 +#define TIMING_CFG2_ACSM 0x00080000 #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 -#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 -#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 +#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ u32 sdram_cfg; /**< SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 -#define SDRAM_CFG_SREN 0x40000000 +#define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 -#define SDRAM_CFG_RD_EN 0x10000000 +#define SDRAM_CFG_RD_EN 0x10000000 #define SDRAM_CFG_SDRAM_TYPE 0x03000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 -#define SDRAM_CFG_32_BE 0x00080000 -#define SDRAM_CFG_8_BE 0x00040000 -#define SDRAM_CFG_NCAP 0x00020000 -#define SDRAM_CFG_2T_EN 0x00008000 +#define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_8_BE 0x00040000 +#define SDRAM_CFG_NCAP 0x00020000 +#define SDRAM_CFG_2T_EN 0x00008000 #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 u8 res2[4]; @@ -988,33 +988,33 @@ typedef struct ddr83xx { #define SDRAM_MODE_ESD 0xFFFF0000 #define SDRAM_MODE_ESD_SHIFT 16 #define SDRAM_MODE_SD 0x0000FFFF -#define SDRAM_MODE_SD_SHIFT 0 -#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ -#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ -#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ -#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ -#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ -#define DDR_MODE_WEAK 0x0002 /* weak drivers */ -#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ -#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ -#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ -#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ -#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ -#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ -#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ -#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ -#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ -#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ -#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ -#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ -#define DDR_MODE_MODEREG 0x0000 /* select mode register */ +#define SDRAM_MODE_SD_SHIFT 0 +#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ +#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +#define DDR_MODE_MODEREG 0x0000 /* select mode register */ u8 res3[8]; u32 sdram_interval; /**< SDRAM Interval Configuration */ #define SDRAM_INTERVAL_REFINT 0x3FFF0000 #define SDRAM_INTERVAL_REFINT_SHIFT 16 #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF -#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 +#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 u8 res9[8]; u32 sdram_clk_cntl; #define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 @@ -1024,8 +1024,8 @@ typedef struct ddr83xx { #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 u8 res4[0xCCC]; - u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ - u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ + u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ #define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ #define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ @@ -1039,7 +1039,7 @@ typedef struct ddr83xx { #define CAPTURE_ECC_ECE_SHIFT 0 u8 res6[0x14]; u32 err_detect; /**< Memory Error Detect */ -#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ +#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ #define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ #define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ #define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ @@ -1053,10 +1053,10 @@ typedef struct ddr83xx { #define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ #define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ #define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) - u32 capture_attributes; /**< Memory Error Attributes Capture */ -#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ + u32 capture_attributes; /**< Memory Error Attributes Capture */ +#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ #define ECC_CAPT_ATTR_BNUM_SHIFT 28 -#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ #define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 #define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 #define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 @@ -1084,7 +1084,7 @@ typedef struct ddr83xx { u32 capture_address; /**< Memory Error Address Capture */ u32 capture_ext_address;/**< Memory Error Extended Address Capture */ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ -#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ +#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ #define ECC_ERROR_MAN_SBET_SHIFT 16 #define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ #define ECC_ERROR_MAN_SBEC_SHIFT 0 @@ -1119,8 +1119,8 @@ typedef struct duart83xx { * Local Bus Controller Registers */ typedef struct lbus_bank { - u32 br; /**< Base Register */ - u32 or; /**< Base Register */ + u32 br; /**< Base Register */ + u32 or; /**< Base Register */ } lbus_bank_t; typedef struct lbus83xx { @@ -1148,24 +1148,24 @@ typedef struct lbus83xx { u8 res6[0xC]; u32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 -#define LBCR_LDIS_SHIFT 31 +#define LBCR_LDIS_SHIFT 31 #define LBCR_BCTLC 0x00C00000 #define LBCR_BCTLC_SHIFT 22 #define LBCR_LPBSE 0x00020000 #define LBCR_LPBSE_SHIFT 17 #define LBCR_EPAR 0x00010000 -#define LBCR_EPAR_SHIFT 16 +#define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 -#define LBCR_BMT_SHIFT 8 +#define LBCR_BMT_SHIFT 8 u32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 +#define LCRR_DBYP_SHIFT 31 #define LCRR_BUFCMDC 0x30000000 #define LCRR_BUFCMDC_SHIFT 28 #define LCRR_ECL 0x03000000 -#define LCRR_ECL_SHIFT 24 +#define LCRR_ECL_SHIFT 24 #define LCRR_EADC 0x00030000 -#define LCRR_EADC_SHIFT 16 +#define LCRR_EADC_SHIFT 16 #define LCRR_CLKDIV 0x0000000F #define LCRR_CLKDIV_SHIFT 0 @@ -1274,7 +1274,7 @@ typedef struct dma83xx { #define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ /* DMASRn bits */ -#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ #define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ /* @@ -1314,33 +1314,33 @@ typedef struct pci_outbound_window { typedef struct ios83xx { pot83xx_t pot[6]; #define POTAR_TA_MASK 0x000fffff -#define POBAR_BA_MASK 0x000fffff -#define POCMR_EN 0x80000000 -#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ -#define POCMR_SE 0x20000000 /* streaming enable */ -#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ -#define POCMR_CM_MASK 0x000fffff -#define POCMR_CM_4G 0x00000000 -#define POCMR_CM_2G 0x00080000 -#define POCMR_CM_1G 0x000C0000 -#define POCMR_CM_512M 0x000E0000 -#define POCMR_CM_256M 0x000F0000 -#define POCMR_CM_128M 0x000F8000 -#define POCMR_CM_64M 0x000FC000 -#define POCMR_CM_32M 0x000FE000 -#define POCMR_CM_16M 0x000FF000 -#define POCMR_CM_8M 0x000FF800 -#define POCMR_CM_4M 0x000FFC00 -#define POCMR_CM_2M 0x000FFE00 -#define POCMR_CM_1M 0x000FFF00 -#define POCMR_CM_512K 0x000FFF80 -#define POCMR_CM_256K 0x000FFFC0 -#define POCMR_CM_128K 0x000FFFE0 -#define POCMR_CM_64K 0x000FFFF0 -#define POCMR_CM_32K 0x000FFFF8 -#define POCMR_CM_16K 0x000FFFFC -#define POCMR_CM_8K 0x000FFFFE -#define POCMR_CM_4K 0x000FFFFF +#define POBAR_BA_MASK 0x000fffff +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ +#define POCMR_SE 0x20000000 /* streaming enable */ +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ +#define POCMR_CM_MASK 0x000fffff +#define POCMR_CM_4G 0x00000000 +#define POCMR_CM_2G 0x00080000 +#define POCMR_CM_1G 0x000C0000 +#define POCMR_CM_512M 0x000E0000 +#define POCMR_CM_256M 0x000F0000 +#define POCMR_CM_128M 0x000F8000 +#define POCMR_CM_64M 0x000FC000 +#define POCMR_CM_32M 0x000FE000 +#define POCMR_CM_16M 0x000FF000 +#define POCMR_CM_8M 0x000FF800 +#define POCMR_CM_4M 0x000FFC00 +#define POCMR_CM_2M 0x000FFE00 +#define POCMR_CM_1M 0x000FFF00 +#define POCMR_CM_512K 0x000FFF80 +#define POCMR_CM_256K 0x000FFFC0 +#define POCMR_CM_128K 0x000FFFE0 +#define POCMR_CM_64K 0x000FFFF0 +#define POCMR_CM_32K 0x000FFFF8 +#define POCMR_CM_16K 0x000FFFFC +#define POCMR_CM_8K 0x000FFFFE +#define POCMR_CM_4K 0x000FFFFF u8 res0[0x60]; u32 pmcr; u8 res1[4]; @@ -1355,63 +1355,63 @@ typedef struct pcictrl83xx { u32 esr; #define ESR_MERR 0x80000000 #define ESR_APAR 0x00000400 -#define ESR_PCISERR 0x00000200 -#define ESR_MPERR 0x00000100 -#define ESR_TPERR 0x00000080 -#define ESR_NORSP 0x00000040 -#define ESR_TABT 0x00000020 +#define ESR_PCISERR 0x00000200 +#define ESR_MPERR 0x00000100 +#define ESR_TPERR 0x00000080 +#define ESR_NORSP 0x00000040 +#define ESR_TABT 0x00000020 u32 ecdr; #define ECDR_APAR 0x00000400 -#define ECDR_PCISERR 0x00000200 -#define ECDR_MPERR 0x00000100 -#define ECDR_TPERR 0x00000080 -#define ECDR_NORSP 0x00000040 -#define ECDR_TABT 0x00000020 +#define ECDR_PCISERR 0x00000200 +#define ECDR_MPERR 0x00000100 +#define ECDR_TPERR 0x00000080 +#define ECDR_NORSP 0x00000040 +#define ECDR_TABT 0x00000020 u32 eer; #define EER_APAR 0x00000400 -#define EER_PCISERR 0x00000200 -#define EER_MPERR 0x00000100 -#define EER_TPERR 0x00000080 -#define EER_NORSP 0x00000040 -#define EER_TABT 0x00000020 +#define EER_PCISERR 0x00000200 +#define EER_MPERR 0x00000100 +#define EER_TPERR 0x00000080 +#define EER_NORSP 0x00000040 +#define EER_TABT 0x00000020 u32 eatcr; -#define EATCR_ERRTYPR_MASK 0x70000000 -#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ -#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ -#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ -#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ -#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ -#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ -#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ -#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ +#define EATCR_ERRTYPR_MASK 0x70000000 +#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ +#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ +#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ +#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ +#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ +#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ +#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ +#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ #define EATCR_BN_MASK 0x0f000000 /* beat number */ -#define EATCR_BN_1st 0x00000000 -#define EATCR_BN_2ed 0x01000000 -#define EATCR_BN_3rd 0x02000000 -#define EATCR_BN_4th 0x03000000 -#define EATCR_BN_5th 0x0400000 -#define EATCR_BN_6th 0x05000000 -#define EATCR_BN_7th 0x06000000 -#define EATCR_BN_8th 0x07000000 -#define EATCR_BN_9th 0x08000000 +#define EATCR_BN_1st 0x00000000 +#define EATCR_BN_2ed 0x01000000 +#define EATCR_BN_3rd 0x02000000 +#define EATCR_BN_4th 0x03000000 +#define EATCR_BN_5th 0x0400000 +#define EATCR_BN_6th 0x05000000 +#define EATCR_BN_7th 0x06000000 +#define EATCR_BN_8th 0x07000000 +#define EATCR_BN_9th 0x08000000 #define EATCR_TS_MASK 0x00300000 /* transaction size */ -#define EATCR_TS_4 0x00000000 -#define EATCR_TS_1 0x00100000 -#define EATCR_TS_2 0x00200000 -#define EATCR_TS_3 0x00300000 -#define EATCR_ES_MASK 0x000f0000 /* error source */ -#define EATCR_ES_EM 0x00000000 /* external master */ -#define EATCR_ES_DMA 0x00050000 -#define EATCR_CMD_MASK 0x0000f000 +#define EATCR_TS_4 0x00000000 +#define EATCR_TS_1 0x00100000 +#define EATCR_TS_2 0x00200000 +#define EATCR_TS_3 0x00300000 +#define EATCR_ES_MASK 0x000f0000 /* error source */ +#define EATCR_ES_EM 0x00000000 /* external master */ +#define EATCR_ES_DMA 0x00050000 +#define EATCR_CMD_MASK 0x0000f000 #if defined (CONFIG_MPC8349) -#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ +#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ #endif -#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ +#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ #if defined (CONFIG_MPC8349) -#define EATCR_HPB 0x00000004 /* high parity bit */ +#define EATCR_HPB 0x00000004 /* high parity bit */ #endif -#define EATCR_PB 0x00000002 /* parity bit */ -#define EATCR_VI 0x00000001 /* error information valid */ +#define EATCR_PB 0x00000002 /* parity bit */ +#define EATCR_VI 0x00000001 /* error information valid */ u32 eacr; u32 eeacr; #if defined (CONFIG_MPC8349) @@ -1448,33 +1448,33 @@ typedef struct pcictrl83xx { #define PIEBAR_EBA_MASK 0x000fffff #define PIWAR_EN 0x80000000 #define PIWAR_PF 0x20000000 -#define PIWAR_RTT_MASK 0x000f0000 -#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 #define PIWAR_RTT_SNOOP 0x00050000 -#define PIWAR_WTT_MASK 0x0000f000 -#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 #define PIWAR_WTT_SNOOP 0x00005000 -#define PIWAR_IWS_MASK 0x0000003F -#define PIWAR_IWS_4K 0x0000000B -#define PIWAR_IWS_8K 0x0000000C -#define PIWAR_IWS_16K 0x0000000D -#define PIWAR_IWS_32K 0x0000000E -#define PIWAR_IWS_64K 0x0000000F -#define PIWAR_IWS_128K 0x00000010 -#define PIWAR_IWS_256K 0x00000011 -#define PIWAR_IWS_512K 0x00000012 -#define PIWAR_IWS_1M 0x00000013 -#define PIWAR_IWS_2M 0x00000014 -#define PIWAR_IWS_4M 0x00000015 -#define PIWAR_IWS_8M 0x00000016 -#define PIWAR_IWS_16M 0x00000017 -#define PIWAR_IWS_32M 0x00000018 -#define PIWAR_IWS_64M 0x00000019 -#define PIWAR_IWS_128M 0x0000001A -#define PIWAR_IWS_256M 0x0000001B -#define PIWAR_IWS_512M 0x0000001C -#define PIWAR_IWS_1G 0x0000001D -#define PIWAR_IWS_2G 0x0000001E +#define PIWAR_IWS_MASK 0x0000003F +#define PIWAR_IWS_4K 0x0000000B +#define PIWAR_IWS_8K 0x0000000C +#define PIWAR_IWS_16K 0x0000000D +#define PIWAR_IWS_32K 0x0000000E +#define PIWAR_IWS_64K 0x0000000F +#define PIWAR_IWS_128K 0x00000010 +#define PIWAR_IWS_256K 0x00000011 +#define PIWAR_IWS_512K 0x00000012 +#define PIWAR_IWS_1M 0x00000013 +#define PIWAR_IWS_2M 0x00000014 +#define PIWAR_IWS_4M 0x00000015 +#define PIWAR_IWS_8M 0x00000016 +#define PIWAR_IWS_16M 0x00000017 +#define PIWAR_IWS_32M 0x00000018 +#define PIWAR_IWS_64M 0x00000019 +#define PIWAR_IWS_128M 0x0000001A +#define PIWAR_IWS_256M 0x0000001B +#define PIWAR_IWS_512M 0x0000001C +#define PIWAR_IWS_1G 0x0000001D +#define PIWAR_IWS_2G 0x0000001E } pcictrl83xx_t; #if defined (CONFIG_MPC8349) @@ -1638,7 +1638,7 @@ typedef struct spi83xx { u8 spim; /* SPI mask register */ u8 res4[0x1]; u8 res5[0x1]; - u8 spcom; /* SPI command register */ + u8 spcom; /* SPI command register */ u8 res6[0x2]; u32 spitd; /* SPI transmit data register (cpu mode) */ u32 spird; /* SPI receive data register (cpu mode) */ @@ -1785,20 +1785,20 @@ typedef struct uslow { typedef struct ufast { u32 gumr; /* UCCx general mode register */ - u32 upsmr; /* UCCx protocol-specific mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ u16 utodr; /* UCCx transmit on demand register */ u8 res0[0x2]; u16 udsr; /* UCCx data synchronization register */ u8 res1[0x2]; u32 ucce; /* UCCx event register */ - u32 uccm; /* UCCx mask register. */ + u32 uccm; /* UCCx mask register. */ u8 uccs; /* UCCx status register */ u8 res2[0x7]; u32 urfb; /* UCC receive FIFO base */ u16 urfs; /* UCC receive FIFO size */ u8 res3[0x2]; - u16 urfet; /* UCC receive FIFO emergency threshold */ - u16 urfset; /* UCC receive FIFO special emergency threshold */ + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency threshold */ u32 utfb; /* UCC transmit FIFO base */ u16 utfs; /* UCC transmit FIFO size */ u8 res4[0x2]; @@ -1816,7 +1816,7 @@ typedef struct ufast { u32 maccfg2; /* Mac configuration register #2 */ u16 ipgifg; /* Interframe gap register */ u8 res10[0x2]; - u32 hafdup; /* Half-duplex register */ + u32 hafdup; /* Half-duplex register */ u8 res11[0xC]; u32 emtr; /* Ethernet MAC test register */ u32 miimcfg; /* MII mgmt configuration register */ @@ -2046,7 +2046,7 @@ typedef struct immap { cp83xx_t cp; /* Communications Processor */ qmx83xx_t qmx; /* QE Multiplexer */ qet83xx_t qet; /* QE Timers */ - spi83xx_t spi[0x2]; /* spi */ + spi83xx_t spi[0x2]; /* spi */ mcc83xx_t mcc; /* mcc */ brg83xx_t brg; /* brg */ usb83xx_t usb; /* USB */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 8dc96352a1..cbdbb2921d 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -38,17 +38,17 @@ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) I2C address list: - Align. Board - Bus Addr Part No. Description Length Location + Align. Board + Bus Addr Part No. Description Length Location ---------------------------------------------------------------- - I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 + I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 - I2C1 0x20 PCF8574 I2C Expander 0 U8 - I2C1 0x21 PCF8574 I2C Expander 0 U10 - I2C1 0x38 PCF8574A I2C Expander 0 U8 - I2C1 0x39 PCF8574A I2C Expander 0 U10 - I2C1 0x51 (DDR) DDR EEPROM 1 U1 - I2C1 0x68 DS1339 RTC 1 U68 + I2C1 0x20 PCF8574 I2C Expander 0 U8 + I2C1 0x21 PCF8574 I2C Expander 0 U10 + I2C1 0x38 PCF8574A I2C Expander 0 U8 + I2C1 0x39 PCF8574A I2C Expander 0 U10 + I2C1 0x51 (DDR) DDR EEPROM 1 U1 + I2C1 0x68 DS1339 RTC 1 U68 Note that a given board has *either* a pair of 8574s or a pair of 8574As. */ @@ -80,15 +80,15 @@ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE -#define CFG_I2C_OFFSET 0x3000 -#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 #define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ #define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ #define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ #define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ #define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ #define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ @@ -96,7 +96,7 @@ #define CFG_I2C_SLAVE 0x7F /* Don't probe these addresses: */ -#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ +#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ {1, CFG_I2C_8574_ADDR2}, \ {1, CFG_I2C_8574A_ADDR1}, \ {1, CFG_I2C_8574A_ADDR2}} @@ -131,9 +131,9 @@ #define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00003000 /* memtest region */ -#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00003000 /* memtest region */ +#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ /* * DDR Setup @@ -157,7 +157,7 @@ #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SDRAM_BASE CFG_DDR_BASE #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE -#undef CONFIG_DDR_2T_TIMING +#undef CONFIG_DDR_2T_TIMING #define CFG_83XX_DDR_USES_CS0 #ifndef CONFIG_SPD_EEPROM @@ -214,13 +214,13 @@ #ifdef CONFIG_COMPACT_FLASH -#define CFG_CF_BASE 0xF0000000 +#define CFG_CF_BASE 0xF0000000 -#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) -#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) +#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) +#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) #define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ -#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ +#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ #undef CONFIG_IDE_RESET #undef CONFIG_IDE_PREINIT @@ -241,27 +241,27 @@ #define CONFIG_DOS_PARTITION -#define CFG_MID_FLASH_JUMP 0x7F000000 -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CFG_RAMBOOT #endif #define CONFIG_L1_INIT_RAM #define CFG_INIT_RAM_LOCK #define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ -#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* * Local Bus LCRR and LBCR regs @@ -287,7 +287,7 @@ * SDRAM for MSEL = BR2[24:26] = 011 * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 */ @@ -316,9 +316,9 @@ #define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) #define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) #define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) -#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) -#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) -#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) #define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) #define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) #define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) @@ -329,16 +329,16 @@ #define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) #define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) -#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) #define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) #define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) #define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) -#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ | CFG_LBC_LSDMR_BSMA1516 \ | CFG_LBC_LSDMR_RFCR8 \ | CFG_LBC_LSDMR_PRETOACT6 \ @@ -381,7 +381,7 @@ /* Use the HUSH parser */ #define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif @@ -430,7 +430,7 @@ #define _IO_BASE 0x00000000 /* points to PCI I/O space */ #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #ifdef CONFIG_RTL8139 /* This macro is used by RTL8139 but not defined in PPC architecture */ @@ -462,14 +462,14 @@ #ifdef CONFIG_MPC83XX_TSEC1 #define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CFG_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 #endif #ifdef CONFIG_MPC83XX_TSEC2 #define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" -#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2_OFFSET 0x25000 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 @@ -486,7 +486,7 @@ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ @@ -518,13 +518,13 @@ #define CONFIG_COMMANDS_I2C 0 #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CONFIG_COMMANDS_CF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CONFIG_COMMANDS_I2C | \ - CONFIG_COMMANDS_PCI | \ - CFG_CMD_SDRAM | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CONFIG_COMMANDS_I2C | \ + CONFIG_COMMANDS_PCI | \ + CFG_CMD_SDRAM | \ CFG_CMD_DATE | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ) @@ -534,13 +534,13 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_WATCHDOG -#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 +#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 #endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ @@ -550,7 +550,7 @@ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ @@ -569,7 +569,7 @@ #define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ #endif -#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ #define CFG_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ @@ -623,7 +623,7 @@ #define CFG_HID0_FINAL CFG_HID0_INIT -#define CFG_HID2 HID2_HBE +#define CFG_HID2 HID2_HBE /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -741,7 +741,7 @@ #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_BOOTCOMMAND @@ -761,7 +761,7 @@ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ " console=ttyS0," MK_STR(CONFIG_BAUDRATE) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ @@ -776,25 +776,25 @@ "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ - "fdtaddr=400000\0" \ - "fdtfile=mpc8349emitx.dtb\0" \ - "" + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emitx.dtb\0" \ + "" -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 2ff5f48980..8ad6551de7 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -10,7 +10,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -120,7 +120,7 @@ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) #define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ #define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ -#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ +#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ #define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ #define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ #endif @@ -141,7 +141,7 @@ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CFG_RAMBOOT #endif #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ @@ -217,7 +217,7 @@ * SDRAM for MSEL = BR2[24:26] = 011 * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 * * CFG_LBC_SDRAM_BASE should be masked and OR'ed into @@ -233,10 +233,10 @@ * 64MB mask for AM, OR2[0:7] = 1111 1100 * XAM, OR2[17:18] = 11 * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 + * 13 rows OR2[23-25] = 100 * EAD set for extra time OR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ @@ -248,13 +248,13 @@ /* * LSDMR masks */ -#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) #define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) #define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) #define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) #define CFG_LBC_LSDMR_COMMON 0x0063b723 @@ -311,7 +311,7 @@ /* Use the HUSH parser */ #define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif @@ -335,7 +335,7 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 -#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C2_OFFSET 0x3100 /* * Config on-board RTC @@ -369,7 +369,7 @@ #undef CONFIG_EEPRO100 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ #endif /* CONFIG_PCI */ @@ -393,7 +393,7 @@ #define CFG_UEC1_TX_CLK QE_CLK9 #define CFG_UEC1_ETH_TYPE GIGA_ETH #define CFG_UEC1_PHY_ADDR 0 -#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII #endif #define CONFIG_UEC_ETH2 /* GETH2 */ @@ -404,7 +404,7 @@ #define CFG_UEC2_TX_CLK QE_CLK4 #define CFG_UEC2_ETH_TYPE GIGA_ETH #define CFG_UEC2_PHY_ADDR 1 -#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII #endif /* @@ -414,7 +414,7 @@ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ @@ -428,16 +428,16 @@ #if defined(CFG_RAMBOOT) #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_ASKENV \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_LOADS)) #else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_ASKENV \ | CFG_CMD_I2C) \ @@ -447,13 +447,13 @@ #endif #else #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PCI \ | CFG_CMD_PING \ | CFG_CMD_ASKENV \ | CFG_CMD_I2C) #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_ASKENV \ | CFG_CMD_I2C ) @@ -593,39 +593,39 @@ #if defined(CONFIG_UEC_ETH) #define CONFIG_ETHADDR 00:04:9f:ef:01:01 #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 +#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 #endif -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=1000000\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ "fdtaddr=400000\0" \ "fdtfile=mpc8349emds.dtb\0" \ "" -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" diff --git a/include/ioports.h b/include/ioports.h index 91ca6fb48e..cfba667cab 100644 --- a/include/ioports.h +++ b/include/ioports.h @@ -63,4 +63,3 @@ typedef struct { } qe_iop_conf_t; #define QE_IOP_TAB_END (-1) - diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 1866dc5cf0..a11d3c0fd2 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -521,17 +521,17 @@ void board_init_f (ulong bootflag) bd->bi_pevfreq = gd->pev_clk; bd->bi_flbfreq = gd->flb_clk; - /* store bootparam to sram (backward compatible), here? */ - { - u32 *sram = (u32 *)CFG_SRAM_BASE; - *sram++ = gd->ram_size; - *sram++ = gd->bus_clk; - *sram++ = gd->inp_clk; - *sram++ = gd->cpu_clk; - *sram++ = gd->vco_clk; - *sram++ = gd->flb_clk; - *sram++ = 0xb8c3ba11; /* boot signature */ - } + /* store bootparam to sram (backward compatible), here? */ + { + u32 *sram = (u32 *)CFG_SRAM_BASE; + *sram++ = gd->ram_size; + *sram++ = gd->bus_clk; + *sram++ = gd->inp_clk; + *sram++ = gd->cpu_clk; + *sram++ = gd->vco_clk; + *sram++ = gd->flb_clk; + *sram++ = 0xb8c3ba11; /* boot signature */ + } #endif bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ From ee311214e0d216f904feea269599d0934bf71f23 Mon Sep 17 00:00:00 2001 From: roy zang Date: Fri, 1 Dec 2006 11:47:36 +0800 Subject: [PATCH 67/72] Clean up the code according to codestyle: (1) remove some C++ comments. (2) remove trailing white space. (3) remove trailing empty line. (4) Indentation by table. (5) remove {} in one line condition. (6) add space before '(' in function call. Remove some weird printf () output. Add necessary comments. Modified Makefile to support building in a separate directory. --- Makefile | 2 +- board/mpc7448hpc2/Makefile | 20 +- board/mpc7448hpc2/asm_init.S | 1125 +++++++++++++++---------------- board/mpc7448hpc2/mpc7448hpc2.c | 152 ++--- board/mpc7448hpc2/tsi108_init.c | 421 ++++++------ cpu/74xx_7xx/cpu.c | 16 +- cpu/74xx_7xx/speed.c | 82 +-- doc/README.mpc7448hpc2 | 202 +++--- drivers/tsi108_eth.c | 767 +++++++++++---------- drivers/tsi108_i2c.c | 60 +- drivers/tsi108_pci.c | 34 +- include/configs/mpc7448hpc2.h | 290 ++++---- include/tsi108.h | 250 +++---- 13 files changed, 1687 insertions(+), 1734 deletions(-) diff --git a/Makefile b/Makefile index 531a257a67..e781a6747d 100644 --- a/Makefile +++ b/Makefile @@ -1722,7 +1722,7 @@ EVB64260_750CX_config: unconfig @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx mpc7448hpc2 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 P3G4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile index d5ed01f026..e3d757d5dd 100644 --- a/board/mpc7448hpc2/Makefile +++ b/board/mpc7448hpc2/Makefile @@ -23,26 +23,30 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o tsi108_init.o +COBJS := $(BOARD).o tsi108_init.o +SOBJS := asm_init.o -SOBJS = asm_init.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) +.PHONY: distclean distclean: clean rm -f $(LIB) core *.bak .depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude ($obj).depend ######################################################################### diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S index 8c15a3d497..a7a40a134c 100644 --- a/board/mpc7448hpc2/asm_init.S +++ b/board/mpc7448hpc2/asm_init.S @@ -1,10 +1,10 @@ -/***************************************************************************** +/* * (C) Copyright 2004-05; Tundra Semiconductor Corp. - * + * * Added automatic detect of SDC settings * Copyright (c) 2005 Freescale Semiconductor, Inc. * Maintainer tie-fei.zang@freescale.com - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -19,9 +19,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - ****************************************************************************/ + */ -/*---------------------------------------------------------------------------- +/* * FILENAME: asm_init.s * * Originator: Alex Bounine @@ -29,7 +29,7 @@ * DESCRIPTION: * Initialization code for the Tundra Tsi108 bridge chip * - *---------------------------------------------------------------------------*/ + */ #include #include @@ -40,15 +40,15 @@ #include -/*=========================================================================== +/* * Build Configuration Options */ -/* #define DISABLE_PBM disables usage of PB Master */ -/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ -/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ +/* #define DISABLE_PBM disables usage of PB Master */ +/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ +/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ -/* =========================================================================== +/* * Hardcoded SDC settings */ @@ -56,571 +56,543 @@ /* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */ -#define VAL_SD_REFRESH (0x61A) -#define VAL_SD_TIMING (0x0308336b) -#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ -#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ +#define VAL_SD_REFRESH (0x61A) +#define VAL_SD_TIMING (0x0308336b) +#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ +#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ #endif /* SDC_HARDCODED_INIT */ -/*--------------------------------------------------------------------------- +/* CPU Configuration: CPU Address and Data Parity enables. #define CPU_AP #define CPU_DP +*/ -=========================================================================== - Macros - - !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are - expected to work correctly for the CSR space within 32KB range. - - LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. - These macros are absolutely identical except their names. This difference - is provided intentionally for better readable code. - -------------------------------------------------------------------------*/ +/* + * Macros + * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are + * expected to work correctly for the CSR space within 32KB range. + * + * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. + * These macros are absolutely identical except their names. This difference + * is provided intentionally for better readable code. + */ #define LOAD_PTR(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l #define LOAD_U32(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l -/* LOADMEM initializes a register with the contents of a specified 32-bit memory - location, usually a CSR value.*/ +/* LOADMEM initializes a register with the contents of a specified 32-bit + * memory location, usually a CSR value. + */ #define LOAD_MEM(reg,addr32) \ - addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) + addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) #ifndef SDC_HARDCODED_INIT sdc_clk_sync: /* MHz: 0,0,183,100,133,167,200,233 */ - .long 0,0, 6, 10, 8, 6, 5, 4 /* nSec */ + .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */ #endif -/*=========================================================================== - board_asm_init() - early initialization function. Coded to be portable to - dual-CPU configuration. - Checks CPU number and performs board HW initialization if called for CPU0. +/* + * board_asm_init() - early initialization function. Coded to be portable to + * dual-CPU configuration. + * Checks CPU number and performs board HW initialization if called for CPU0. + * Registers used: r3,r4,r5,r6,r19,r29 + * + * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 + * and the rest of the board. Current implementation demonstrates two + * possible ways to identify CPU number: + * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. + * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. + */ - Registers used: r3,r4,r5,r6,r19,r29 -=========================================================================== - ---------------------------------------------------------------------------- - NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 - and the rest of the board. Current implementation demonstrates two - possible ways to identify CPU number: - - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. - - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. ----------------------------------------------------------------------------*/ - - .globl board_asm_init + .globl board_asm_init board_asm_init: + mflr r19 /* Save LR to be able return later. */ + bl icache_enable /* Enable icache to reduce reads from flash. */ - mflr r19 /* Save LR to be able return later. */ +/* Initialize pointer to Tsi108 register space */ - bl icache_enable /* Enable icache to reduce reads from flash. */ + LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ + ori r4,r29,TSI108_PB_REG_OFFSET - /* Initialize pointer to Tsi108 register space - -------------------------------------------------------------------------*/ +/* Check Processor Version Number */ - LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ - ori r4,r29,TSI108_PB_REG_OFFSET + mfspr r3, PVR + rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ - /*------------------------------------------------------------------------- - Check Processor Version Number */ + cmpli 0,0,r3,0x8000 /* MPC74xx */ + bne cont_brd_init - mfspr r3, PVR - rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ + /* + * For MPC744x/5x enable extended BATs[4-7] + * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 + * to disable prefetch + */ - cmpli 0,0,r3,0x8000 /* MPC74xx */ - bne cont_brd_init + mfspr r5, HID0 + oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ + ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ + mtspr HID0, r5 + isync + sync - /* ------------------------------------------ - For MPC744x/5x enable extended BATs[4-7] - Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 - to disable prefetch - */ + /* Adding code to disable external interventions in MPX bus mode */ + mfspr r3, 1014 + oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ + mtspr 1014, r3 + isync + sync - mfspr r5, HID0 - oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ - ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ - mtspr HID0, r5 - isync - sync + /* Sri: code to enable FP unit */ + mfmsr r3 + ori r3, r3, 0x2000 + mtmsr r3 + isync + sync - /* Adding code to disable external interventions in MPX bus mode */ - mfspr r3, 1014 - oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ - mtspr 1014, r3 - isync - sync - - /* Sri: code to enable FP unit */ - mfmsr r3 - ori r3, r3, 0x2000 - mtmsr r3 - isync - sync - -#if(1) /* def CONFIG_DUAL_CPU - ------------------------------------------------------------------------- - For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. - */ - - mfspr r3,1014 /* read MSSCR0 */ - rlwinm. r3,r3,27,31,31 /* get processor ID number */ - mtspr SPRN_PIR,r3 /* Save CPU ID */ - sync - bne init_done - b do_tsi108_init + /* def CONFIG_DUAL_CPU + * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. + */ +#if(1) + mfspr r3,1014 /* read MSSCR0 */ + rlwinm. r3,r3,27,31,31 /* get processor ID number */ + mtspr SPRN_PIR,r3 /* Save CPU ID */ + sync + bne init_done + b do_tsi108_init cont_brd_init: - /* An alternative method of checking the processor number (in addition - to configuration using MSSCR0[ID] bit on MPC74xx). - Good for IBM PPC750FX/GX. - */ - - lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ - rlwinm. r3,r3,24,31,31 /* get processor ID number */ - - bne init_done + /* An alternative method of checking the processor number (in addition + * to configuration using MSSCR0[ID] bit on MPC74xx). + * Good for IBM PPC750FX/GX. + */ + lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ + rlwinm. r3,r3,24,31,31 /* get processor ID number */ + bne init_done #else cont_brd_init: #endif /* CONFIG_DUAL_CPU */ - /* Initialize Tsi108 chip - --------------------------------------------------------------------------- - */ + /* Initialize Tsi108 chip */ do_tsi108_init: - /*-------------------------------------------------------------------------- - Adjust HLP/Flash parameters. By default after reset the HLP port is set - to support slow devices. Better performance can be achived when an optimal - parameters are used for specific EPROM device. - NOTE: This should be performed ASAP for the emulation platform because - it has 5MHz HLP clocking. - */ + /* + * Adjust HLP/Flash parameters. By default after reset the HLP port is + * set to support slow devices. Better performance can be achived when + * an optimal parameters are used for specific EPROM device. + * NOTE: This should be performed ASAP for the emulation platform + * because it has 5MHz HLP clocking. + */ #ifdef CONFIG_TSI108EMU - ori r4,r29,TSI108_HLP_REG_OFFSET - LOAD_U32(r5,0x434422c0) - stw r5,0x08(r4) /* set HLP B0_CTRL0 */ - sync - LOAD_U32(r5,0xd0012000) - stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ - sync + ori r4,r29,TSI108_HLP_REG_OFFSET + LOAD_U32(r5,0x434422c0) + stw r5,0x08(r4) /* set HLP B0_CTRL0 */ + sync + LOAD_U32(r5,0xd0012000) + stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ + sync #endif - /* ------------------------------------------------------------------------- - * Initialize PB interface. - */ + /* Initialize PB interface. */ - ori r4,r29,TSI108_PB_REG_OFFSET + ori r4,r29,TSI108_PB_REG_OFFSET #if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE) - /* Relocate (if required) Tsi108 registers. Set new value for PB_REG_BAR: - * Note we are in the 32-bit address mode. - */ - LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* value for PB_REG_BAR: BA + EN*/ - stw r5,PB_REG_BAR(r4) - andis. r29,r5,0xFFFF - sync - - ori r4,r29,TSI108_PB_REG_OFFSET + /* Relocate (if required) Tsi108 registers. Set new value for + * PB_REG_BAR: + * Note we are in the 32-bit address mode. + */ + LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ + stw r5,PB_REG_BAR(r4) + andis. r29,r5,0xFFFF + sync + ori r4,r29,TSI108_PB_REG_OFFSET #endif - /* Set PB Slave configuration register */ + /* Set PB Slave configuration register */ -/* LOAD_U32(r5,0x000024C7) value for PB_SCR: TEA enabled,AACK delay = 7 */ - LOAD_U32(r5,0x00002481) /* value for PB_SCR: TEA enabled,AACK delay = 1 */ - lwz r3, PB_RSR(r4) /* get PB bus mode */ - xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ - rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ - stw r5,PB_SCR(r4) - sync + LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */ + lwz r3, PB_RSR(r4) /* get PB bus mode */ + xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ + rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ + stw r5,PB_SCR(r4) + sync - /* Configure PB Arbiter */ + /* Configure PB Arbiter */ - lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ + lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ #ifdef DISABLE_PBM - ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ + ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ #endif - andc r5,r5,r3 /* Clear the masked bit fields */ -/* ori r5,r5,0x0040 Set pipeline depth 4 - ori r5,r5,0x0080 Set pipeline depth 8 - ori r5,r5,0x0020 !!!avb Testing: set pipeline depth 2 */ - ori r5,r5,0x0001 - stw r5,PB_ARB_CTRL(r4) + andc r5,r5,r3 /* Clear the masked bit fields */ + ori r5,r5,0x0001 /* Set pipeline depth */ + stw r5,PB_ARB_CTRL(r4) -#if (0) /* currently using the default settings for PBM after reset */ - LOAD_U32(r5,0x) /* value for PB_MCR */ - stw r5,PB_MCR(r4) - sync +#if (0) /* currently using the default settings for PBM after reset */ + LOAD_U32(r5,0x) /* value for PB_MCR */ + stw r5,PB_MCR(r4) + sync - LOAD_U32(r5,0x) /* value for PB_MCMD */ - stw r5,PB_MCMD(r4) - sync + LOAD_U32(r5,0x) /* value for PB_MCMD */ + stw r5,PB_MCMD(r4) + sync #endif -/* Disable or enable PVT based on processor bus frequency - 1. Read CG_PWRUP_STATUS register field bits 18,17,16 - 2. See if the value is < or > 133mhz (18:16 = 100) - 3. If > enable PVT - */ + /* Disable or enable PVT based on processor bus frequency + * 1. Read CG_PWRUP_STATUS register field bits 18,17,16 + * 2. See if the value is < or > 133mhz (18:16 = 100) + * 3. If > enable PVT + */ - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,16,29,31 + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,16,29,31 - cmpi 0,0,r3,0x0004 - bgt sdc_init + cmpi 0,0,r3,0x0004 + bgt sdc_init #ifndef CONFIG_TSI108EMU - /* FIXME: Disable PB calibration control for any real Tsi108 board */ - li r5,0x0101 /* disable calibration control */ - stw r5,PB_PVT_CTRL2(r4) - sync + /* FIXME: Disable PB calibration control for any real Tsi108 board */ + li r5,0x0101 /* disable calibration control */ + stw r5,PB_PVT_CTRL2(r4) + sync #endif -/*--------------------------------------------------------------------------- - Initialize SDRAM controller. -----------------------------------------------------------------------------*/ + /* Initialize SDRAM controller. */ sdc_init: #ifndef SDC_HARDCODED_INIT - /* get SDC clock prior doing sdram controller autoconfig */ - ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ - lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ - rlwinm r3,r3,12,29,31 /* r3 - SD clk */ - lis r5,sdc_clk_sync@h - ori r5,r5,sdc_clk_sync@l - /* Sri: At this point check if r3 = 001. If yes, - * the memory frequency should be same as the - * MPX bus frequency - */ - cmpi 0,0,r3,0x0001 - bne get_nsec - lwz r6, CG_PWRUP_STATUS(r4) - rlwinm r6,r6,16,29,31 - mr r3,r6 + /* get SDC clock prior doing sdram controller autoconfig */ + ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ + lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ + rlwinm r3,r3,12,29,31 /* r3 - SD clk */ + lis r5,sdc_clk_sync@h + ori r5,r5,sdc_clk_sync@l + /* Sri: At this point check if r3 = 001. If yes, + * the memory frequency should be same as the + * MPX bus frequency + */ + cmpi 0,0,r3,0x0001 + bne get_nsec + lwz r6, CG_PWRUP_STATUS(r4) + rlwinm r6,r6,16,29,31 + mr r3,r6 get_nsec: - rlwinm r3,r3,2,0,31 - lwzx r9,r5,r3 /* get SD clk rate in nSec */ - /* ATTN: r9 will be used by SPD routine */ + rlwinm r3,r3,2,0,31 + lwzx r9,r5,r3 /* get SD clk rate in nSec */ + /* ATTN: r9 will be used by SPD routine */ #endif /* !SDC_HARDCODED_INIT */ - ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ + ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ - /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ + /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ - LOAD_U32(r5,0x00) - stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ + LOAD_U32(r5,0x00) + stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ #ifdef ENABLE_SDRAM_ECC - li r5, 0x01 + li r5, 0x01 #endif /* ENABLE_SDRAM_ECC */ - stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ - sync + stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ + sync #ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */ - /* First read the CG_PWRUP_STATUS register to get the - memory speed from bits 22,21,20 */ + /* First read the CG_PWRUP_STATUS register to get the + * memory speed from bits 22,21,20 + */ - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,12,29,31 + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,12,29,31 - /* Now first check for 166, then 200, or default */ + /* Now first check for 166, then 200, or default */ - cmpi 0,0,r3,0x0005 - bne check_for_200mhz + cmpi 0,0,r3,0x0005 + bne check_for_200mhz - /* set values for 166 Mhz memory speed */ + /* set values for 166 Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x00000515) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03073368) + stw r5,SD_TIMING(r4) + sync - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x00000515) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03073368) - stw r5,SD_TIMING(r4) - sync - - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done check_for_200mhz: - cmpi 0,0,r3,0x0006 - bne set_default_values + cmpi 0,0,r3,0x0006 + bne set_default_values - /* set values for 200Mhz memory speed */ + /* set values for 200Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x0000061a) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03083348) + stw r5,SD_TIMING(r4) + sync - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x0000061a) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03083348) - stw r5,SD_TIMING(r4) - sync - - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done set_default_values: - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,VAL_SD_REFRESH) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,VAL_SD_TIMING) - stw r5,SD_TIMING(r4) - sync + /* Set refresh rate and timing parameters */ + LOAD_U32(r5,VAL_SD_REFRESH) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,VAL_SD_TIMING) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync - + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync #else /* !SDC_HARDCODED_INIT */ - - bl tsi108_sdram_spd /* automatically detect SDC settings */ - + bl tsi108_sdram_spd /* automatically detect SDC settings */ #endif /* SDC_HARDCODED_INIT */ sdc_init_done: #ifdef DISABLE_PBM - LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ + LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ #else - LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ + LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ #endif /* DISABLE_PBM */ #ifdef CONFIG_TSI108EMU - oris r5,r5,0x0010 /* set EMULATION_MODE bit */ + oris r5,r5,0x0010 /* set EMULATION_MODE bit */ #endif - stw r5,SD_CTRL(r4) - eieio - sync + stw r5,SD_CTRL(r4) + eieio + sync - /* Enable SDRAM access */ + /* Enable SDRAM access */ - oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ - stw r5,SD_CTRL(r4) - sync + oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ + stw r5,SD_CTRL(r4) + sync wait_init_complete: - lwz r5,SD_STATUS(r4) - andi. r5,r5,0x0001 - beq wait_init_complete /* wait until SDRAM initialization is complete */ + lwz r5,SD_STATUS(r4) + andi. r5,r5,0x0001 + /* wait until SDRAM initialization is complete */ + beq wait_init_complete -/*--------------------------------------------------------------------------- - Map SDRAM into the processor bus address space ----------------------------------------------------------------------------*/ + /* Map SDRAM into the processor bus address space */ - ori r4,r29,TSI108_PB_REG_OFFSET + ori r4,r29,TSI108_PB_REG_OFFSET - /* Setup BARs associated with direct path PB<->SDRAM */ + /* Setup BARs associated with direct path PB<->SDRAM */ - /* PB_SDRAM_BAR1: - provides a direct path to the main system memory (cacheable SDRAM) */ + /* PB_SDRAM_BAR1: + * provides a direct path to the main system memory (cacheable SDRAM) + */ - LOAD_U32(r5, 0x00000011) /* BA=0,Size=512MB, ENable, No Addr.Translation */ - stw r5,PB_SDRAM_BAR1(r4) - sync + /* BA=0,Size=512MB, ENable, No Addr.Translation */ + LOAD_U32(r5, 0x00000011) + stw r5,PB_SDRAM_BAR1(r4) + sync - /* Make sure that PB_SDRAM_BAR1 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR1(r4) - sync + /* Make sure that PB_SDRAM_BAR1 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR1(r4) + sync - /* PB_SDRAM_BAR2: - provides non-cacheable alias (via the direct path) to main system memory. - Size = 512MB, ENable, Addr.Translation - ON, - BA = 0x0_40000000, TA = 0x0_00000000 */ + /* PB_SDRAM_BAR2: + * provides non-cacheable alias (via the direct path) to main + * system memory. + * Size = 512MB, ENable, Addr.Translation - ON, + * BA = 0x0_40000000, TA = 0x0_00000000 + */ - LOAD_U32(r5, 0x40010011) - stw r5,PB_SDRAM_BAR2(r4) - sync - - /* Make sure that PB_SDRAM_BAR2 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR2(r4) - sync + LOAD_U32(r5, 0x40010011) + stw r5,PB_SDRAM_BAR2(r4) + sync + /* Make sure that PB_SDRAM_BAR2 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR2(r4) + sync init_done: - /* All done. Restore LR and return. */ - mtlr r19 - blr + /* All done. Restore LR and return. */ + mtlr r19 + blr #if (0) -/*=========================================================================== - init_cpu1 + /* + * init_cpu1 + * This routine enables CPU1 on the dual-processor system. + * Now there is only one processor in the system + */ - This routine enables CPU1 on the dual-processor system. -===========================================================================*/ - - .global enable_cpu1 + .global enable_cpu1 enable_cpu1: - lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ - addi r3,r3,Tsi108_Base@l - lwz r3,0(r3) /* R3 = CSR Base Addr */ - ori r4,r3,TSI108_PB_REG_OFFSET - lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - ori r3,r3,0x0200 /* Set M1_EN bit */ - stw r3,PB_ARB_CTRL(r4) + lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ + addi r3,r3,Tsi108_Base@l + lwz r3,0(r3) /* R3 = CSR Base Addr */ + ori r4,r3,TSI108_PB_REG_OFFSET + lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + ori r3,r3,0x0200 /* Set M1_EN bit */ + stw r3,PB_ARB_CTRL(r4) - blr + blr #endif -/*=========================================================================== - enable_EI + /* + * enable_EI + * Enable CPU core external interrupt + */ - Enable CPU core external interrupt -===========================================================================*/ - - .global enable_EI + .global enable_EI enable_EI: - mfmsr r3 - ori r3,r3,0x8000 /* set EE bit */ - mtmsr r3 - blr + mfmsr r3 + ori r3,r3,0x8000 /* set EE bit */ + mtmsr r3 + blr -/*=========================================================================== - disable_EI + /* + * disable_EI + * Disable CPU core external interrupt + */ - Disable CPU core external interrupt -===========================================================================*/ - - .global disable_EI + .global disable_EI disable_EI: - mfmsr r3 - li r4,-32768 /* aka "li r4,0x8000" */ - andc r3,r3,r4 /* clear EE bit */ - mtmsr r3 - blr + mfmsr r3 + li r4,-32768 /* aka "li r4,0x8000" */ + andc r3,r3,r4 /* clear EE bit */ + mtmsr r3 + blr #ifdef ENABLE_SDRAM_ECC -/*=========================================================================== - enable_ECC + /* enables SDRAM ECC */ - enables SDRAM ECC -===========================================================================*/ - - .global enable_ECC + .global enable_ECC enable_ECC: - ori r4,r29,TSI108_SD_REG_OFFSET - lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ - ori r3,r3,0x0001 /* Set ECC_EN bit */ - stw r3,SD_ECC_CTRL(r4) - blr + ori r4,r29,TSI108_SD_REG_OFFSET + lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ + ori r3,r3,0x0001 /* Set ECC_EN bit */ + stw r3,SD_ECC_CTRL(r4) + blr -/*=========================================================================== - clear_ECC_err + /* + * clear_ECC_err + * Clears all pending SDRAM ECC errors + * (normally after SDRAM scrubbing/initialization) + */ - Clears all pending SDRAM ECC errors - (normally after SDRAM scrubbing/initialization) -===========================================================================*/ - - .global clear_ECC_err + .global clear_ECC_err clear_ECC_err: - ori r4,r29,TSI108_SD_REG_OFFSET -/* lwz r3,SD_INT_STATUS(r4) Read SDRAM ECC Control Register */ - ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ - stw r3,SD_INT_STATUS(r4) - blr + ori r4,r29,TSI108_SD_REG_OFFSET + ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ + stw r3,SD_INT_STATUS(r4) + blr #endif /* ENABLE_SDRAM_ECC */ #ifndef SDC_HARDCODED_INIT -/******************************************************************** - * SDRAM SPD Support - */ - + /* SDRAM SPD Support */ #define SD_I2C_CTRL1 (0x400) #define SD_I2C_CTRL2 (0x404) #define SD_I2C_RD_DATA (0x408) -#define SD_I2C_WR_DATA (0x40C) +#define SD_I2C_WR_DATA (0x40C) -/* - * SDRAM SPD Support Macros - */ + /* + * SDRAM SPD Support Macros + */ #define SPD_DIMM0 (0x00000100) -#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ +#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ #define SPD_RDIMM (0x01) #define SPD_UDIMM (0x02) @@ -651,30 +623,30 @@ clear_ECC_err: * r10 - number of DDR slot where first SPD device is detected */ -#define READ_SPD(byte_num) \ - addis r3, 0, byte_num@l;\ - or r3, r3, r10;\ - ori r3, r3, 0x0A;\ - stw r3, SD_I2C_CTRL1(r4);\ - li r3, I2C_CNTRL2_START;\ - stw r3, SD_I2C_CTRL2(r4);\ - eieio;\ - sync;\ - li r3, 0x100;\ -1: ;\ - addic. r3, r3, -1;\ - bne 1b;\ -2: ;\ - lwz r5, SD_I2C_CTRL2(r4);\ - rlwinm. r3,r5,0,23,23;\ - bne 2b;\ - rlwinm. r3,r5,0,3,3;\ - lwz r3, SD_I2C_RD_DATA(r4) +#define READ_SPD(byte_num) \ + addis r3, 0, byte_num@l; \ + or r3, r3, r10; \ + ori r3, r3, 0x0A; \ + stw r3, SD_I2C_CTRL1(r4); \ + li r3, I2C_CNTRL2_START; \ + stw r3, SD_I2C_CTRL2(r4); \ + eieio; \ + sync; \ + li r3, 0x100; \ +1:; \ + addic. r3, r3, -1; \ + bne 1b; \ +2:; \ + lwz r5, SD_I2C_CTRL2(r4); \ + rlwinm. r3,r5,0,23,23; \ + bne 2b; \ + rlwinm. r3,r5,0,3,3; \ + lwz r3,SD_I2C_RD_DATA(r4) #define SPD_MIN_RFRSH (0x80) #define SPD_MAX_RFRSH (0x85) -refresh_rates: /* in nSec */ +refresh_rates: /* in nSec */ .long 15625 /* Normal (0x80) */ .long 3900 /* Reduced 0.25x (0x81) */ .long 7800 /* Reduced 0.5x (0x82) */ @@ -682,274 +654,265 @@ refresh_rates: /* in nSec */ .long 62500 /* Extended 4x (0x84) */ .long 125000 /* Extended 8x (0x85) */ -/*=========================================================================== +/* * tsi108_sdram_spd * * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data * Uses registers: r4 - SDC base address (not changed) * r9 - SDC clocking period in nSec * Changes registers: r3,r5,r6,r7,r8,r10,r11 - *==========================================================================*/ + */ tsi108_sdram_spd: - li r10,SPD_DIMM0 + li r10,SPD_DIMM0 xor r11,r11,r11 /* DIMM Base Address: starts from 0 */ do_first_dimm: - /************************************** - * Program Refresh Rate Register - */ + /* Program Refresh Rate Register */ - READ_SPD(12) /* get Refresh Rate */ - beq check_next_slot - li r5, ERR_RFRSH_RATE - cmpi 0,0,r3,SPD_MIN_RFRSH - ble spd_fail - cmpi 0,0,r3,SPD_MAX_RFRSH - bgt spd_fail - addi r3,r3,-SPD_MIN_RFRSH - rlwinm r3,r3,2,0,31 - lis r5,refresh_rates@h - ori r5,r5,refresh_rates@l - lwzx r5,r5,r3 /* get refresh rate in nSec */ - divwu r5,r5,r9 /* calculate # of SDC clocks */ - stw r5,SD_REFRESH(r4) /* Set refresh rate */ + READ_SPD(12) /* get Refresh Rate */ + beq check_next_slot + li r5, ERR_RFRSH_RATE + cmpi 0,0,r3,SPD_MIN_RFRSH + ble spd_fail + cmpi 0,0,r3,SPD_MAX_RFRSH + bgt spd_fail + addi r3,r3,-SPD_MIN_RFRSH + rlwinm r3,r3,2,0,31 + lis r5,refresh_rates@h + ori r5,r5,refresh_rates@l + lwzx r5,r5,r3 /* get refresh rate in nSec */ + divwu r5,r5,r9 /* calculate # of SDC clocks */ + stw r5,SD_REFRESH(r4) /* Set refresh rate */ sync - /************************************** - * Program SD Timing Register - */ + /* Program SD Timing Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ - READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ + READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ beq spd_read_fail - li r5, ERR_DIMM_TYPE - cmpi 0,0,r3,SPD_UDIMM - beq do_cl - cmpi 0,0,r3,SPD_RDIMM - bne spd_fail - oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ + li r5, ERR_DIMM_TYPE + cmpi 0,0,r3,SPD_UDIMM + beq do_cl + cmpi 0,0,r3,SPD_RDIMM + bne spd_fail + oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ do_cl: - READ_SPD(18) /* Get CAS Latency */ + READ_SPD(18) /* Get CAS Latency */ beq spd_read_fail - li r5,ERR_CL_VALUE - andi. r6,r3,SPD_CAS_3 - beq cl_4 - li r6,3 - b set_cl + li r5,ERR_CL_VALUE + andi. r6,r3,SPD_CAS_3 + beq cl_4 + li r6,3 + b set_cl cl_4: - andi. r6,r3,SPD_CAS_4 - beq cl_5 - li r6,4 - b set_cl + andi. r6,r3,SPD_CAS_4 + beq cl_5 + li r6,4 + b set_cl cl_5: - andi. r6,r3,SPD_CAS_5 - beq spd_fail - li r6,5 + andi. r6,r3,SPD_CAS_5 + beq spd_fail + li r6,5 set_cl: - rlwimi r7,r6,24,5,7 + rlwimi r7,r6,24,5,7 - READ_SPD(30) /* Get tRAS */ + READ_SPD(30) /* Get tRAS */ beq spd_read_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_tras - addi r6,r6,1 + addi r6,r6,1 set_tras: li r5,ERR_TRAS_FAIL - cmpi 0,0,r6,0x0F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,16,12,15 + cmpi 0,0,r6,0x0F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,16,12,15 READ_SPD(29) /* Get tRCD */ beq spd_read_fail - rlwinm r3,r3,30,2,31/* right shift tRCD by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + /* right shift tRCD by 2 bits as per DDR2 spec */ + rlwinm r3,r3,30,2,31 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trcd - addi r6,r6,1 + addi r6,r6,1 set_trcd: - li r5,ERR_TRCD_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,12,17,19 + li r5,ERR_TRCD_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,12,17,19 READ_SPD(27) /* Get tRP value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trp - addi r6,r6,1 + addi r6,r6,1 set_trp: - li r5,ERR_TRP_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,8,21,23 + li r5,ERR_TRP_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,8,21,23 READ_SPD(36) /* Get tWR value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_twr - addi r6,r6,1 + addi r6,r6,1 set_twr: - addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ - li r5,ERR_TWR_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,5,24,26 + addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ + li r5,ERR_TWR_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,5,24,26 READ_SPD(42) /* Get tRFC */ beq spd_read_fail - li r5, ERR_TRFC_FAIL + li r5, ERR_TRFC_FAIL /* Tsi108 spec: tRFC=(tRFC + 1)/2 */ - addi r3,r3,1 - rlwinm. r3,r3,31,1,31 /* divide by 2 */ - beq spd_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + addi r3,r3,1 + rlwinm. r3,r3,31,1,31 /* divide by 2 */ + beq spd_fail + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trfc - addi r6,r6,1 + addi r6,r6,1 set_trfc: - cmpi 0,0,r6,0x1F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,0,27,31 + cmpi 0,0,r6,0x1F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,0,27,31 stw r7,SD_TIMING(r4) sync - /*===================================================================== + /* * The following two registers are set on per-DIMM basis. * The SD_REFRESH and SD_TIMING settings are common for both DIMMS - *===================================================================== */ do_each_dimm: - /***************************************** - * Program SDRAM DIMM Control Register - */ + /* Program SDRAM DIMM Control Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ READ_SPD(13) /* Get Primary SDRAM Width */ beq spd_read_fail - cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ - beq do_nbank - oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ + cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ + beq do_nbank + oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ do_nbank: READ_SPD(17) /* Get Number of banks on SDRAM device */ beq spd_read_fail /* Grendel only distinguish betw. 4 or 8-bank memory parts */ - li r5,ERR_UNKNOWN_PART /* non-supported memory part */ - cmpi 0,0,r3,4 - beq do_nrank - cmpi 0,0,r3,8 - bne spd_fail - ori r7,r7,0x1000 + li r5,ERR_UNKNOWN_PART /* non-supported memory part */ + cmpi 0,0,r3,4 + beq do_nrank + cmpi 0,0,r3,8 + bne spd_fail + ori r7,r7,0x1000 do_nrank: - READ_SPD(5) /* Get # of Ranks */ + READ_SPD(5) /* Get # of Ranks */ beq spd_read_fail - li r5,ERR_NRANK_INVALID - andi. r6,r3,0x7 /* Use bits [2..0] only */ - beq do_addr_mode - cmpi 0,0,r6,1 - bgt spd_fail - rlwimi r7,r6,8,23,23 + li r5,ERR_NRANK_INVALID + andi. r6,r3,0x7 /* Use bits [2..0] only */ + beq do_addr_mode + cmpi 0,0,r6,1 + bgt spd_fail + rlwimi r7,r6,8,23,23 do_addr_mode: - READ_SPD(4) /* Get # of Column Addresses */ + READ_SPD(4) /* Get # of Column Addresses */ beq spd_read_fail - li r5, ERR_ADDR_MODE - andi. r3,r3,0x0f /* cut off reserved bits */ - cmpi 0,0,r3,8 - ble spd_fail - cmpi 0,0,r3,15 - bgt spd_fail - addi r6,r3,-8 /* calculate ADDR_MODE parameter */ - rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ + li r5, ERR_ADDR_MODE + andi. r3,r3,0x0f /* cut off reserved bits */ + cmpi 0,0,r3,8 + ble spd_fail + cmpi 0,0,r3,15 + bgt spd_fail + addi r6,r3,-8 /* calculate ADDR_MODE parameter */ + rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ set_dimm_ctrl: #ifdef SDC_AUTOPRECH_EN - oris r7,r7,0x0001 /* set auto precharge EN bit */ + oris r7,r7,0x0001 /* set auto precharge EN bit */ #endif - ori r7,r7,1 /* set ENABLE bit */ - cmpi 0,0,r10,SPD_DIMM0 - bne 1f - stw r7,SD_D0_CTRL(r4) + ori r7,r7,1 /* set ENABLE bit */ + cmpi 0,0,r10,SPD_DIMM0 + bne 1f + stw r7,SD_D0_CTRL(r4) sync - b set_dimm_bar + b set_dimm_bar 1: - stw r7,SD_D1_CTRL(r4) + stw r7,SD_D1_CTRL(r4) sync - /******************************************** - * Program SDRAM DIMMx Base Address Register - */ + /* Program SDRAM DIMMx Base Address Register */ set_dimm_bar: READ_SPD(5) /* get # of Ranks */ beq spd_read_fail - andi.r7,r3,0x7 - addi r7,r7,1 - READ_SPD(31) /* Read DIMM rank density */ + andi. r7,r3,0x7 + addi r7,r7,1 + READ_SPD(31) /* Read DIMM rank density */ beq spd_read_fail - rlwinm r5,r3,27,29,31 - rlwinm r6,r3,3,24,28 - or r5,r6,r5 /* r5 = Normalized Rank Density byte */ - lis r8, 0x0080 /* 128MB >> 4 */ - mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ - mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ - neg r7,r8 - rlwinm r7,r7,28,4,31 - or r7,r7,r11 /* set ADDR field */ - rlwinm r8,r8,12,20,31 - add r11,r11,r8 /* set Base Addr for next DIMM */ + rlwinm r5,r3,27,29,31 + rlwinm r6,r3,3,24,28 + or r5,r6,r5 /* r5 = Normalized Rank Density byte */ + lis r8, 0x0080 /* 128MB >> 4 */ + mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ + mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ + neg r7,r8 + rlwinm r7,r7,28,4,31 + or r7,r7,r11 /* set ADDR field */ + rlwinm r8,r8,12,20,31 + add r11,r11,r8 /* set Base Addr for next DIMM */ - cmpi 0,0,r10,SPD_DIMM0 - bne set_dimm1_size - stw r7,SD_D0_BAR(r4) + cmpi 0,0,r10,SPD_DIMM0 + bne set_dimm1_size + stw r7,SD_D0_BAR(r4) sync - li r10,SPD_DIMM1 + li r10,SPD_DIMM1 READ_SPD(0) bne do_each_dimm b spd_done set_dimm1_size: - stw r7,SD_D1_BAR(r4) + stw r7,SD_D1_BAR(r4) sync spd_done: blr check_next_slot: - cmpi 0,0,r10,SPD_DIMM1 - beq spd_read_fail - li r10,SPD_DIMM1 - b do_first_dimm + cmpi 0,0,r10,SPD_DIMM1 + beq spd_read_fail + li r10,SPD_DIMM1 + b do_first_dimm spd_read_fail: ori r3,r0,0xdead - b err_hung + b err_hung spd_fail: li r3,0x0bad sync -err_hung: /* hang here for debugging */ - nop - nop - b err_hung +err_hung: /* hang here for debugging */ + nop + nop + b err_hung #endif /* !SDC_HARDCODED_INIT */ - diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c index f90a75124a..4d221e7a69 100644 --- a/board/mpc7448hpc2/mpc7448hpc2.c +++ b/board/mpc7448hpc2/mpc7448hpc2.c @@ -25,7 +25,7 @@ */ /* - * board support/init functions for the + * board support/init functions for the * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform). */ @@ -33,39 +33,38 @@ #include <74xx_7xx.h> #if defined(CONFIG_OF_FLAT_TREE) #include -extern void ft_cpu_setup(void *blob, bd_t *bd); +extern void ft_cpu_setup (void *blob, bd_t *bd); #endif #undef DEBUG -extern void flush_data_cache(void); -extern void invalidate_l1_instruction_cache(void); -extern void tsi108_init_f(void); +extern void flush_data_cache (void); +extern void invalidate_l1_instruction_cache (void); +extern void tsi108_init_f (void); -int display_mem_map(void); +int display_mem_map (void); -void after_reloc(ulong dest_addr) +void after_reloc (ulong dest_addr) { DECLARE_GLOBAL_DATA_PTR; /* * Jump to the main U-Boot board init code */ - board_init_r((gd_t *) gd, dest_addr); + board_init_r ((gd_t *) gd, dest_addr); /* NOTREACHED */ } /* * Check Board Identity: - * * report board type */ -int checkboard(void) +int checkboard (void) { int l_type = 0; - printf("BOARD: %s\n", CFG_BOARD_NAME); + printf ("BOARD: %s\n", CFG_BOARD_NAME); return (l_type); } @@ -75,19 +74,19 @@ int checkboard(void) * report calling processor number */ -int read_pid(void) +int read_pid (void) { return 0; /* we are on single CPU platform for a while */ } -long int dram_size(int board_type) +long int dram_size (int board_type) { return 0x20000000; /* 256M bytes */ } -long int initdram(int board_type) +long int initdram (int board_type) { - return dram_size(board_type); + return dram_size (board_type); } /* DRAM check routines copied from gw8260 */ @@ -114,11 +113,11 @@ long int initdram(int board_type) /* May cloober fr0. */ /* */ /*********************************************************************/ -static void move64(unsigned long long *src, unsigned long long *dest) +static void move64 (unsigned long long *src, unsigned long long *dest) { - asm("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : :"fr0"); /* Clobbers fr0 */ + asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ + "stfd 0, 0(4)" /* *dest = fpr0 */ + : : :"fr0"); /* Clobbers fr0 */ return; } @@ -183,28 +182,28 @@ unsigned long long pattern[] = { /* Assumes only one one SDRAM bank */ /* */ /*********************************************************************/ -int mem_test_data(void) +int mem_test_data (void) { unsigned long long *pmem = (unsigned long long *)CFG_MEMTEST_START; unsigned long long temp64; - int num_patterns = sizeof(pattern) / sizeof(pattern[0]); + int num_patterns = sizeof (pattern) / sizeof (pattern[0]); int i; unsigned int hi, lo; for (i = 0; i < num_patterns; i++) { - move64(&(pattern[i]), pmem); - move64(pmem, &temp64); + move64 (&(pattern[i]), pmem); + move64 (pmem, &temp64); - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ + /* hi = (temp64>>32) & 0xffffffff; */ + /* lo = temp64 & 0xffffffff; */ + /* printf ("\ntemp64 = 0x%08x%08x", hi, lo); */ hi = (pattern[i] >> 32) & 0xffffffff; lo = pattern[i] & 0xffffffff; - /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ + /* printf ("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ if (temp64 != pattern[i]) { - printf("\n Data Test Failed, pattern 0x%08x%08x", + printf ("\n Data Test Failed, pattern 0x%08x%08x", hi, lo); return 1; } @@ -236,7 +235,7 @@ int mem_test_data(void) /* */ /* */ /*********************************************************************/ -int mem_test_address(void) +int mem_test_address (void) { volatile unsigned int *pmem = (volatile unsigned int *)CFG_MEMTEST_START; @@ -251,13 +250,13 @@ int mem_test_address(void) /* verify each loaction */ for (i = 0; i < size; i++) { if (pmem[i] != i) { - printf("\n Address Test Failed at 0x%x", i); + printf ("\n Address Test Failed at 0x%x", i); return 1; } } return 0; } -#endif /* CFG_DRAM_TEST_ADDRESS */ +#endif /* CFG_DRAM_TEST_ADDRESS */ #if defined (CFG_DRAM_TEST_WALK) /*********************************************************************/ @@ -287,7 +286,7 @@ int mem_test_address(void) /* */ /* */ /*********************************************************************/ -int mem_march(volatile unsigned long long *base, +int mem_march (volatile unsigned long long *base, unsigned int size, unsigned long long rmask, unsigned long long wmask, short read, short write) @@ -299,14 +298,14 @@ int mem_march(volatile unsigned long long *base, for (i = 0; i < size; i++) { if (read != 0) { /* temp = base[i]; */ - move64((unsigned long long *)&(base[i]), &temp); + move64 ((unsigned long long *)&(base[i]), &temp); if (rmask != temp) { hitemp = (temp >> 32) & 0xffffffff; lotemp = temp & 0xffffffff; himask = (rmask >> 32) & 0xffffffff; lomask = rmask & 0xffffffff; - printf("\n Walking one's test failed: \ + printf ("\n Walking one's test failed: \ address = 0x%08x," "\n\texpected \ 0x%08x%08x, found 0x%08x%08x", i << 3,\ himask, lomask, hitemp, lotemp); @@ -315,12 +314,12 @@ int mem_march(volatile unsigned long long *base, } if (write != 0) { /* base[i] = wmask; */ - move64(&wmask, (unsigned long long *)&(base[i])); + move64 (&wmask, (unsigned long long *)&(base[i])); } } return 0; } -#endif /* CFG_DRAM_TEST_WALK */ +#endif /* CFG_DRAM_TEST_WALK */ /*********************************************************************/ /* NAME: mem_test_walk() - a simple walking ones test */ @@ -348,7 +347,7 @@ int mem_march(volatile unsigned long long *base, /* */ /* */ /*********************************************************************/ -int mem_test_walk(void) +int mem_test_walk (void) { unsigned long long mask; volatile unsigned long long *pmem = @@ -359,32 +358,31 @@ int mem_test_walk(void) mask = 0x01; - printf("Initial Pass"); - mem_march(pmem, size, 0x0, 0x1, 0, 1); + printf ("Initial Pass"); + mem_march (pmem, size, 0x0, 0x1, 0, 1); - printf("\b\b\b\b\b\b\b\b\b\b\b\b"); - printf(" "); - printf(" "); - printf("\b\b\b\b\b\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); for (i = 0; i < 63; i++) { - printf("Pass %2d", i + 2); - if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) { - /*printf("mask: 0x%x, pass: %d, ", mask, i); */ + printf ("Pass %2d", i + 2); + if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) + /*printf ("mask: 0x%x, pass: %d, ", mask, i); */ return 1; - } mask = mask << 1; - printf("\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b"); } - printf("Last Pass"); + printf ("Last Pass"); if (mem_march(pmem, size, 0, mask, 0, 1) != 0) { - /* printf("mask: 0x%x", mask); */ + /* printf ("mask: 0x%x", mask); */ return 1; } - printf("\b\b\b\b\b\b\b\b\b"); - printf(" "); - printf("\b\b\b\b\b\b\b\b\b"); + printf ("\b\b\b\b\b\b\b\b\b"); + printf (" "); + printf ("\b\b\b\b\b\b\b\b\b"); return 0; } @@ -412,60 +410,58 @@ int mem_test_walk(void) /* */ /* */ /*********************************************************************/ -int testdram(void) +int testdram (void) { char *s; int rundata, runaddress, runwalk; - s = getenv("testdramdata"); + s = getenv ("testdramdata"); rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv("testdramaddress"); + s = getenv ("testdramaddress"); runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv("testdramwalk"); + s = getenv ("testdramwalk"); runwalk = (s && (*s == 'y')) ? 1 : 0; /* rundata = 1; */ /* runaddress = 0; */ /* runwalk = 0; */ - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { - printf("Testing RAM from 0x%08x to 0x%08x ... \ + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("Testing RAM from 0x%08x to 0x%08x ... \ (don't panic... that will take a moment !!!!)\n", \ CFG_MEMTEST_START, CFG_MEMTEST_END); - } #ifdef CFG_DRAM_TEST_DATA if (rundata == 1) { - printf("Test DATA ... "); + printf ("Test DATA ... "); if (mem_test_data () == 1) { - printf("failed \n"); + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif #ifdef CFG_DRAM_TEST_ADDRESS if (runaddress == 1) { - printf("Test ADDRESS ... "); + printf ("Test ADDRESS ... "); if (mem_test_address () == 1) { - printf("failed \n"); + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif #ifdef CFG_DRAM_TEST_WALK if (runwalk == 1) { - printf("Test WALKING ONEs ... "); - if (mem_test_walk() == 1) { - printf("failed \n"); + printf ("Test WALKING ONEs ... "); + if (mem_test_walk () == 1) { + printf ("failed \n"); return 1; } else - printf("ok \n"); + printf ("ok \n"); } #endif - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { - printf("passed\n"); - } + if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) + printf ("passed\n"); return 0; } @@ -473,17 +469,17 @@ int testdram(void) #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) void -ft_board_setup(void *blob, bd_t *bd) +ft_board_setup (void *blob, bd_t *bd) { u32 *p; int len; - ft_cpu_setup(blob, bd); + ft_cpu_setup (blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); + p = ft_get_prop (blob, "/memory/reg", &len); if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); + *p++ = cpu_to_be32 (bd->bi_memstart); + *p = cpu_to_be32 (bd->bi_memsize); } } #endif diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c index 6f517f5a2e..fdb53653d1 100644 --- a/board/mpc7448hpc2/tsi108_init.c +++ b/board/mpc7448hpc2/tsi108_init.c @@ -1,6 +1,6 @@ /***************************************************************************** * (C) Copyright 2003; Tundra Semiconductor Corp. - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -33,7 +33,7 @@ #include #include -extern void mpicInit(int verbose); +extern void mpicInit (int verbose); /* * Configuration Options @@ -118,11 +118,11 @@ static PLL_CTRL_SET pll0_config[8] = { static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 }; /* - * get_board_bus_clk() + * get_board_bus_clk () * * returns the bus clock in Hz. */ -unsigned long get_board_bus_clk(void) +unsigned long get_board_bus_clk (void) { ulong i; @@ -134,37 +134,38 @@ unsigned long get_board_bus_clk(void) } /* - * board_early_init_f() + * board_early_init_f () * * board-specific initialization executed from flash */ -int board_early_init_f(void) +int board_early_init_f (void) { DECLARE_GLOBAL_DATA_PTR; ulong i; gd->mem_clk = 0; - i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); - i = (i >> 20) & 0x07; + i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + + CG_PWRUP_STATUS); + i = (i >> 20) & 0x07; /* value of SW4[4:7] */ switch (i) { - case 0: - printf("Using external clock\n"); + case 0: /* external clock */ + printf ("Using external clock\n"); break; - case 1: + case 1: /* system clock */ gd->mem_clk = gd->bus_clk; break; - case 4: - case 5: - case 6: + case 4: /* 133 MHz */ + case 5: /* 166 MHz */ + case 6: /* 200 MHz */ gd->mem_clk = pb_clk_sel[i] * 1000000; break; default: - printf("Invalid DDR2 clock setting\n"); + printf ("Invalid DDR2 clock setting\n"); return -1; } - printf("BUS! %d MHz\n", get_board_bus_clk() / 1000000); - printf("MEM! %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); return 0; } @@ -173,175 +174,174 @@ int board_early_init_f(void) * relocation. Contains code that cannot be executed from flash. */ -int board_early_init_r(void) +int board_early_init_r (void) { ulong temp, i; ulong reg_val; volatile ulong *reg_ptr; reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); for (i = 0; i < 32; i++) { *reg_ptr++ = 0x00000201; /* SWAP ENABLED */ *reg_ptr++ = 0x00; } - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */ - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, - 0x80000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, + 0x80000001); + __asm__ __volatile__ ("sync"); /* Make sure that OCN_BAR2 decoder is set (to allow following immediate - * read from SDRAM) + * read from SDRAM) */ temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the * processor bus address space. Immediately after reset LUT and address * translation are disabled for this BAR. Now we have to initialize LUT * and switch from the BOOT mode to the normal operation mode. - * + * * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000 - * and covers 512MB of address space. To allow larger aperture we also + * and covers 512MB of address space. To allow larger aperture we also * have to relocate register window of Tsi108 * - * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT + * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT * mode. - * + * * initialize pointer to LUT associated with PB_OCN_BAR1 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); for (i = 0; i < 32; i++) { *reg_ptr++ = pb2ocn_lut1[i].lower; *reg_ptr++ = pb2ocn_lut1[i].upper; } - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* Base addresses for Cs0, CS1, CS2, CS3 */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, - 0x00000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, + 0x00000000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, - 0x00100000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, + 0x00100000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, - 0x00200000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, + 0x00200000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, - 0x00300000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, + 0x00300000); + __asm__ __volatile__ ("sync"); /* Masks for HLP banks */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, - 0xFFF00000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, + 0xFFF00000); + __asm__ __volatile__ ("sync"); /* Set CTRL0 values for banks */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, - 0x7FFC44C2); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, - 0x7FFC44C0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, - 0x7FFC44C0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, + 0x7FFC44C0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, - 0x7FFC44C2); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, + 0x7FFC44C2); + __asm__ __volatile__ ("sync"); /* Set banks to latched mode, enabled, and other default settings */ - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, - 0x7C0F2000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, + 0x7C0F2000); + __asm__ __volatile__ ("sync"); /* * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode. * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, - 0xE0000011); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, + 0xE0000011); + __asm__ __volatile__ ("sync"); - /* Make sure that OCN_BAR2 decoder is set (to allow following - * immediate read from SDRAM) + /* Make sure that OCN_BAR2 decoder is set (to allow following + * immediate read from SDRAM) */ - + temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("sync"); /* * SRI: At this point we have enabled the HLP banks. That means we can * now read from the NVRAM and initialize the environment variables. * We will over-ride the env_init called in board_init_f * This is really a work-around because, the HLP bank 1 - * where NVRAM resides is not visible during board_init_f + * where NVRAM resides is not visible during board_init_f * (lib_ppc/board.c) * Alternatively, we could use the I2C EEPROM at start-up to configure * and enable all HLP banks and not just HLP 0 as is being done for * Taiga Rev. 2. */ - env_init(); + env_init (); #ifndef DISABLE_PBM /* - * For IBM processors we have to set Address-Only commands generated + * For IBM processors we have to set Address-Only commands generated * by PBM that are different from ones set after reset. */ - temp = get_cpu_type(); + temp = get_cpu_type (); - if ((CPU_750FX == temp) || (CPU_750GX == temp)) { - out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, - 0x00009955); - } + if ((CPU_750FX == temp) || (CPU_750GX == temp)) + out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, + 0x00009955); #endif /* DISABLE_PBM */ #ifdef CONFIG_PCI @@ -350,42 +350,42 @@ int board_early_init_r(void) */ /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0_UPPER, - 0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + PCI_PFAB_BAR0_UPPER, 0); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, - 0xFB000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, + 0xFB000001); + __asm__ __volatile__ ("sync"); /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */ - temp = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); + temp = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); temp &= ~0xFF00; /* Clear the BUS_NUM field */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, - temp); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, + temp); /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, - 0); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, + 0); + __asm__ __volatile__ ("sync"); /* This register is on the PCI side to interpret the address it receives - * and maps it as a IO address. + * and maps it as a IO address. */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, - 0xFA000001); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, + 0xFA000001); + __asm__ __volatile__ ("sync"); /* * Map PCI/X Memory Space * - * Transactions directed from OCM to PCI Memory Space are directed + * Transactions directed from OCM to PCI Memory Space are directed * from PB to PCI * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings). * If address remapping is required the corresponding PCI_PFAB_MEM32 @@ -393,7 +393,7 @@ int board_early_init_r(void) * * Map the path from the PCI/X bus into the system memory * - * The memory mapped window assotiated with PCI P2O_BAR2 provides + * The memory mapped window assotiated with PCI P2O_BAR2 provides * access to the system memory without address remapping. * All system memory is opened for accesses initiated by PCI/X bus * masters. @@ -404,13 +404,13 @@ int board_early_init_r(void) */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); #ifdef DISABLE_PBM - /* In case when PBM is disabled (no HW supported cache snoopng on PB) - * P2O_BAR2 is directly mapped into the system memory without address - * translation. + /* In case when PBM is disabled (no HW supported cache snoopng on PB) + * P2O_BAR2 is directly mapped into the system memory without address + * translation. */ reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */ @@ -438,30 +438,30 @@ int board_early_init_r(void) reg_val = 0x00007100; #endif - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); - /* Set 64-bit PCI bus address for system memory - * ( 0 is the best choice for easy mapping) + /* Set 64-bit PCI bus address for system memory + * ( 0 is the best choice for easy mapping) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, - 0x00000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, + 0x00000000); + __asm__ __volatile__ ("sync"); #ifndef DISABLE_PBM /* - * The memory mapped window assotiated with PCI P2O_BAR3 provides - * access to the system memory using SDRAM OCN port and address - * translation. This is alternative way to access SDRAM from PCI + * The memory mapped window assotiated with PCI P2O_BAR3 provides + * access to the system memory using SDRAM OCN port and address + * translation. This is alternative way to access SDRAM from PCI * required for Tsi108 emulation testing. - * All system memory is opened for accesses initiated by + * All system memory is opened for accesses initiated by * PCI/X bus masters. * * Initialize LUT associated with PCI P2O_BAR3 @@ -469,7 +469,7 @@ int board_early_init_r(void) * set pointer to LUT associated with PCI P2O_BAR3 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); + (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); reg_val = 0x00000004; /* Destination port = SDC */ @@ -483,45 +483,45 @@ int board_early_init_r(void) reg_val += 0x01000000; } - __asm__ __volatile__("eieio"); - __asm__ __volatile__("sync"); + __asm__ __volatile__ ("eieio"); + __asm__ __volatile__ ("sync"); /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */ reg_val = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES); reg_val &= ~0x00FF; reg_val |= 0x0071; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + reg_val); + __asm__ __volatile__ ("sync"); /* Set 64-bit base PCI bus address for window (0x20000000) */ - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, - 0x20000000); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, + 0x20000000); + __asm__ __volatile__ ("sync"); #endif /* !DISABLE_PBM */ #ifdef ENABLE_PCI_CSR_BAR /* open if required access to Tsi108 CSRs from the PCI/X bus */ /* enable BAR0 on the PCI/X bus */ - reg_val = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); + reg_val = in32(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); reg_val |= 0x02; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, - reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, + reg_val); + __asm__ __volatile__ ("sync"); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, - 0x00000000); - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, - CFG_TSI108_CSR_BASE); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, + 0x00000000); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, + CFG_TSI108_CSR_BASE); + __asm__ __volatile__ ("sync"); #endif @@ -531,32 +531,32 @@ int board_early_init_r(void) reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR); reg_val |= 0x06; - out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); + __asm__ __volatile__ ("sync"); #endif /* CONFIG_PCI */ /* * Initialize MPIC outputs (interrupt pins): * Interrupt routing on the Grendel Emul. Board: - * PB_INT[0] -> INT (CPU0) - * PB_INT[1] -> INT (CPU1) - * PB_INT[2] -> MCP (CPU0) - * PB_INT[3] -> MCP (CPU1) + * PB_INT[0] -> INT (CPU0) + * PB_INT[1] -> INT (CPU1) + * PB_INT[2] -> MCP (CPU0) + * PB_INT[3] -> MCP (CPU1) * Set interrupt controller outputs as Level_Sensitive/Active_Low */ - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); - out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); - __asm__ __volatile__("sync"); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); + out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); + __asm__ __volatile__ ("sync"); /* * Ensure that Machine Check exception is enabled * We need it to support PCI Bus probing (configuration reads) */ - reg_val = mfmsr(); + reg_val = mfmsr (); mtmsr(reg_val | MSR_ME); return 0; @@ -567,7 +567,7 @@ int board_early_init_r(void) * used in the misc_init_r function */ -unsigned long get_l2cr(void) +unsigned long get_l2cr (void) { unsigned long l2controlreg; asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):); @@ -581,79 +581,82 @@ unsigned long get_l2cr(void) * */ -int misc_init_r(void) +int misc_init_r (void) { DECLARE_GLOBAL_DATA_PTR; #ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ ulong i; /* Ensure that Spread-Spectrum is disabled */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5% */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x002e0044); /* D = 0.25% */ - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, 0x00000039); /* BWADJ */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x002e0044); /* D = 0.25% */ + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, + 0x00000039); /* BWADJ */ /* Initialize PLL0: CG_PB_CLKO */ /* Detect PB clock freq. */ i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); /* Wait and set SSEN for both PLL0 and 1 */ - udelay(1000); - out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x802e0044); /* D=0.25% */ - out32(CFG_TSI108_CSR_BASE + - TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, - 0x80000000 | pll0_config[i].ctrl0); + udelay (1000); + out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + 0x802e0044); /* D=0.25% */ + out32 (CFG_TSI108_CSR_BASE + + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, + 0x80000000 | pll0_config[i].ctrl0); #endif /* CFG_CLK_SPREAD */ #ifdef CFG_L2 - l2cache_enable(); + l2cache_enable (); #endif - printf("BUS: %d MHz\n", gd->bus_clk / 1000000); - printf("MEM: %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %d MHz\n", gd->bus_clk / 1000000); + printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); /* - * All the information needed to print the cache details is avaiblable - * at this point i.e. above call to l2cache_enable is the very last - * thing done with regards to enabling diabling the cache. + * All the information needed to print the cache details is avaiblable + * at this point i.e. above call to l2cache_enable is the very last + * thing done with regards to enabling diabling the cache. * So this seems like a good place to print all this information */ - printf("CACHE: "); + printf ("CACHE: "); switch (get_cpu_type()) { case CPU_7447A: - printf("L1 Instruction cache - 32KB 8-way"); - (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" L1 Data cache - 32KB 8-way"); - (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" Unified L2 cache - 512KB 8-way"); - (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf("\n"); + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 512KB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("\n"); break; case CPU_7448: - printf("L1 Instruction cache - 32KB 8-way"); - (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" L1 Data cache - 32KB 8-way"); - (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); - printf(" Unified L2 cache - 1MB 8-way"); - (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") : - printf(" DISABLED\n"); + printf ("L1 Instruction cache - 32KB 8-way"); + (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("L1 Data cache - 32KB 8-way"); + (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); + printf ("Unified L2 cache - 1MB 8-way"); + (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") : + printf (" DISABLED\n"); break; default: break; diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index c3aadca292..fc3b09217f 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -303,7 +303,7 @@ watchdog_reset(void) #ifdef CONFIG_OF_FLAT_TREE void -ft_cpu_setup(void *blob, bd_t *bd) +ft_cpu_setup (void *blob, bd_t *bd) { u32 *p; ulong clock; @@ -311,18 +311,18 @@ ft_cpu_setup(void *blob, bd_t *bd) clock = bd->bi_busfreq; - p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); + p = ft_get_prop (blob, "/cpus/" OF_CPU "/bus-frequency", &len); if (p != NULL) - *p = cpu_to_be32(clock); + *p = cpu_to_be32 (clock); #if defined(CONFIG_TSI108_ETH) - p = ft_get_prop(blob, "/" OF_TSI "/ethernet@6200/address", &len); - memcpy(p, bd->bi_enetaddr, 6); + p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6200/address", &len); + memcpy (p, bd->bi_enetaddr, 6); #endif - + #if defined(CONFIG_HAS_ETH1) - p = ft_get_prop(blob, "/" OF_TSI "/ethernet@6600/address", &len); - memcpy(p, bd->bi_enet1addr, 6); + p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6600/address", &len); + memcpy (p, bd->bi_enet1addr, 6); #endif } #endif diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c index d520794568..af4aca5c34 100644 --- a/cpu/74xx_7xx/speed.c +++ b/cpu/74xx_7xx/speed.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -extern unsigned long get_board_bus_clk(void); +extern unsigned long get_board_bus_clk (void); static const int hid1_multipliers_x_10[] = { 25, /* 0000 - 2.5x */ @@ -53,38 +53,38 @@ static const int hid1_multipliers_x_10[] = { }; static const int hid1_7447A_multipliers_x_10[] = { - 115, /* 00000 - 11.5x */ - 170, /* 00001 - 17x */ - 75, /* 00010 - 7.5x */ - 150, /* 00011 - 15x */ - 70, /* 00100 - 7x */ - 180, /* 00101 - 18x */ - 10, /* 00110 - bypass */ - 200, /* 00111 - 20x */ - 20, /* 01000 - 2x */ - 210, /* 01001 - 21x */ - 65, /* 01010 - 6.5x */ - 130, /* 01011 - 13x */ - 85, /* 01100 - 8.5x */ - 240, /* 01101 - 13x */ - 95, /* 01110 - 9.5x */ - 90, /* 01111 - 9x */ - 30, /* 10000 - 3x */ - 105, /* 10001 - 10.5x */ - 55, /* 10010 - 5.5x */ - 110, /* 10011 - 11x */ - 40, /* 10100 - 4x */ - 100, /* 10101 - 10x */ - 50, /* 10110 - 5x */ - 120, /* 10111 - 12x */ - 80, /* 11000 - 8x */ - 140, /* 11001 - 14x */ - 60, /* 11010 - 6x */ - 160, /* 11011 - 16x */ - 135, /* 11100 - 13.5x */ - 280, /* 11101 - 28x */ - 0, /* 11110 - off */ - 125 /* 11111 - 12.5x */ + 115, /* 00000 - 11.5x */ + 170, /* 00001 - 17x */ + 75, /* 00010 - 7.5x */ + 150, /* 00011 - 15x */ + 70, /* 00100 - 7x */ + 180, /* 00101 - 18x */ + 10, /* 00110 - bypass */ + 200, /* 00111 - 20x */ + 20, /* 01000 - 2x */ + 210, /* 01001 - 21x */ + 65, /* 01010 - 6.5x */ + 130, /* 01011 - 13x */ + 85, /* 01100 - 8.5x */ + 240, /* 01101 - 13x */ + 95, /* 01110 - 9.5x */ + 90, /* 01111 - 9x */ + 30, /* 10000 - 3x */ + 105, /* 10001 - 10.5x */ + 55, /* 10010 - 5.5x */ + 110, /* 10011 - 11x */ + 40, /* 10100 - 4x */ + 100, /* 10101 - 10x */ + 50, /* 10110 - 5x */ + 120, /* 10111 - 12x */ + 80, /* 11000 - 8x */ + 140, /* 11001 - 14x */ + 60, /* 11010 - 6x */ + 160, /* 11011 - 16x */ + 135, /* 11100 - 13.5x */ + 280, /* 11101 - 28x */ + 0, /* 11110 - off */ + 125 /* 11111 - 12.5x */ }; static const int hid1_fx_multipliers_x_10[] = { @@ -127,16 +127,17 @@ int get_clocks (void) ulong clock = 0; #ifdef CFG_CONFIG_BUS_CLK - gd->bus_clk = get_board_bus_clk(); + gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */ #else - gd->bus_clk = CFG_BUS_CLK; + gd->bus_clk = CFG_BUS_CLK; /* bus clock is a fixed frequency */ #endif /* calculate the clock frequency based upon the CPU type */ switch (get_cpu_type()) { case CPU_7447A: case CPU_7448: - clock = (gd->bus_clk / 10) * hid1_7447A_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; + clock = (gd->bus_clk / 10) * + hid1_7447A_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; break; case CPU_7455: @@ -146,12 +147,14 @@ int get_clocks (void) * Make sure division is done before multiplication to prevent 32-bit * arithmetic overflows which will cause a negative number */ - clock = (gd->bus_clk / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF]; + clock = (gd->bus_clk / 10) * + hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF]; break; case CPU_750GX: case CPU_750FX: - clock = gd->bus_clk * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10; + clock = gd->bus_clk * + hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10; break; case CPU_7450: @@ -168,7 +171,8 @@ int get_clocks (void) * Make sure division is done before multiplication to prevent 32-bit * arithmetic overflows which will cause a negative number */ - clock = (gd->bus_clk / 10) * hid1_multipliers_x_10[get_hid1 () >> 28]; + clock = (gd->bus_clk / 10) * + hid1_multipliers_x_10[get_hid1 () >> 28]; break; case CPU_UNKNOWN: diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2 index 5142a0f638..0e40e39269 100644 --- a/doc/README.mpc7448hpc2 +++ b/doc/README.mpc7448hpc2 @@ -3,23 +3,23 @@ Freescale MPC7448hpc2 (Taiga) board Created 08/11/2006 Roy Zang -------------------------- -MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference -design, which is optimized for high speed throughput between the processor and +MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference +design, which is optimized for high speed throughput between the processor and the memory, disk drive and Ethernet port subsystems. -MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be -used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX +MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be +used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX chassis. Building U-Boot ------------------ The mpc7448hpc2 code base is known to compile using: - Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3 + Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3 - $ make mpc7448hpc2_config - Configuring for mpc7448hpc2 board... + $ make mpc7448hpc2_config + Configuring for mpc7448hpc2 board... - $ make + $ make Memory Map ---------- @@ -28,25 +28,24 @@ The memory map is setup for Linux to operate properly. The mapping is: - Range Start Range End Definition Size - - 0x0000_0000 0x7fff_ffff DDR 2G - 0xe000_0000 0xe7ff_ffff PCI Memory 128M - 0xfa00_0000 0xfaff_ffff PCI IO 16M - 0xfb00_0000 0xfbff_ffff PCI Config 16M - 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M - 0xfe00_0000 0xfeff_ffff PromJet 16M - 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M - 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M + Range Start Range End Definition Size + 0x0000_0000 0x7fff_ffff DDR 2G + 0xe000_0000 0xe7ff_ffff PCI Memory 128M + 0xfa00_0000 0xfaff_ffff PCI IO 16M + 0xfb00_0000 0xfbff_ffff PCI Config 16M + 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M + 0xfe00_0000 0xfeff_ffff PromJet 16M + 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M + 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M Using Flash ----------- -The MPC7448hpc2 board has two "banks" of flash, each 8MB in size -(2^23 = 0x00800000). +The MPC7448hpc2 board has two "banks" of flash, each 8MB in size +(2^23 = 0x00800000). -Note: the "bank" here refers to half of the flash. In fact, there is only one +Note: the "bank" here refers to half of the flash. In fact, there is only one bank of flash, which is divided into low and high half. Each is controlled by the most significant bit of the address bus. The so called "bank" is only for convenience. @@ -57,137 +56,130 @@ settings for updating flash are given below. The u-boot commands for copying the boot-bank into the secondary bank are as follows: - erase ff800000 ff880000 - cp.b ff000000 ff800000 80000 + erase ff800000 ff880000 + cp.b ff000000 ff800000 80000 U-boot commands for downloading an image via tftp and flashing it into the secondary bank: - tftp 10000 - erase ff000000 ff080000 - cp.b 10000 ff000000 80000 - + tftp 10000 + erase ff000000 ff080000 + cp.b 10000 ff000000 80000 After copying the image into the second bank of flash, be sure to toggle SW3[4] on board before resetting the board in order to set the secondary bank as the boot-bank. - Board Switches ---------------------- - Most switches on the board should not be changed. The most frequent user-settable switches on the board are used to configure the flash banks and determining the PCI frequency. SW1[1-5]: Processor core voltage - 12345 Core Voltage - ----- - SW1=01111 1.000V. - SW1=01101 1.100V. - SW1=01011 1.200V. - SW1=01001 1.300V only for MPC7447A. + 12345 Core Voltage + ----- + SW1=01111 1.000V. + SW1=01101 1.100V. + SW1=01011 1.200V. + SW1=01001 1.300V only for MPC7447A. SW2[1-6]: CPU core frequency - CPU Core Frequency (MHz) + CPU Core Frequency (MHz) Bus Frequency - 123456 100 133 167 200 Ratio + 123456 100 133 167 200 Ratio - ------ - SW2=101100 500 667 833 1000 5x - SW2=100100 550 733 917 1100 5.5x - SW2=110100 600 800 1000 1200 6x - SW2=010100 650 866 1083 1300 6.5x - SW2=001000 700 930 1167 1400 7x - SW2=000100 750 1000 1250 1500 7.5x - SW2=110000 800 1066 1333 1600 8x - SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A - SW2=011110 900 1200 1500 1800 9x + ------ + SW2=101100 500 667 833 1000 5x + SW2=100100 550 733 917 1100 5.5x + SW2=110100 600 800 1000 1200 6x + SW2=010100 650 866 1083 1300 6.5x + SW2=001000 700 930 1167 1400 7x + SW2=000100 750 1000 1250 1500 7.5x + SW2=110000 800 1066 1333 1600 8x + SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A + SW2=011110 900 1200 1500 1800 9x -This table shows only a subset of available frequency options; see the CPU +This table shows only a subset of available frequency options; see the CPU hardware specifications for more information. - SW2[7-8]: Bus Protocol and CPU Reset Option - 7 - - - SW2=0 System bus uses MPX bus protocol - SW2=1 System bus uses 60x bus protocol - - 8 - - - SW2=0 TSI108 can cause CPU reset - SW2=1 TSI108 can not cause CPU reset + 7 + - + SW2=0 System bus uses MPX bus protocol + SW2=1 System bus uses 60x bus protocol + 8 + - + SW2=0 TSI108 can cause CPU reset + SW2=1 TSI108 can not cause CPU reset SW3[1-8] system options - 123 - --- - SW3=xxx Connected to GPIO[0:2] on TSI108 + 123 + --- + SW3=xxx Connected to GPIO[0:2] on TSI108 - 4 - - - SW3=0 CPU boots from low half of flash - SW3=1 CPU boots from high half of flash + 4 + - + SW3=0 CPU boots from low half of flash + SW3=1 CPU boots from high half of flash - 5 - - - SW3=0 SATA and slot2 connected to PCI bus - SW3=1 Only slot1 connected to PCI bus + 5 + - + SW3=0 SATA and slot2 connected to PCI bus + SW3=1 Only slot1 connected to PCI bus - 6 - - - SW3=0 USB connected to PCI bus - SW3=1 USB disconnected from PCI bus + 6 + - + SW3=0 USB connected to PCI bus + SW3=1 USB disconnected from PCI bus - 7 - - - SW3=0 Flash is write protected - SW3=1 Flash is NOT write protected + 7 + - + SW3=0 Flash is write protected + SW3=1 Flash is NOT write protected - 8 - - - SW3=0 CPU will boot from flash - SW3=1 CPU will boot from PromJet + 8 + - + SW3=0 CPU will boot from flash + SW3=1 CPU will boot from PromJet SW4[1-3]: System bus frequency Bus Frequency (MHz) - --- - SW4=010 183 - SW4=011 100 - SW4=100 133 - SW4=101 166 only for MPC7447A - SW4=110 200 only for MPC7448 - others reserved - + --- + SW4=010 183 + SW4=011 100 + SW4=100 133 + SW4=101 166 only for MPC7447A + SW4=110 200 only for MPC7448 + others reserved SW4[4-6]: DDR2 SDRAM frequency Bus Frequency (MHz) - --- - SW4=000 external clock - SW4=011 system clock - SW4=100 133 - SW4=101 166 - SW4=110 200 - others reserved - + --- + SW4=000 external clock + SW4=011 system clock + SW4=100 133 + SW4=101 166 + SW4=110 200 + others reserved SW4[7-8]: PCI/PCI-X frequency control - 7 - - - SW4=0 PCI/PCI-X bus operates normally - SW4=1 PCI bus forced to PCI-33 mode + 7 + - + SW4=0 PCI/PCI-X bus operates normally + SW4=1 PCI bus forced to PCI-33 mode - 8 - - - SW4=0 PCI-X mode at 133 MHz allowed - SW4=1 PCI-X mode limited to 100 MHz + 8 + - + SW4=0 PCI-X mode at 133 MHz allowed + SW4=1 PCI-X mode limited to 100 MHz diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c index d95a047ce8..47341bee7f 100644 --- a/drivers/tsi108_eth.c +++ b/drivers/tsi108_eth.c @@ -46,7 +46,9 @@ #endif #if TSI108_ETH_DEBUG > 0 -#define debug_lev(lev, fmt, args...) if (lev <= TSI108_ETH_DEBUG) printf("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) +#define debug_lev(lev, fmt, args...) \ +if (lev <= TSI108_ETH_DEBUG) \ +printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) #else #define debug_lev(lev, fmt, args...) do{}while(0) #endif @@ -54,322 +56,322 @@ #define RX_PRINT_ERRORS #define TX_PRINT_ERRORS -#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000) +#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000) -#define ETH_PORT_OFFSET 0x400 +#define ETH_PORT_OFFSET 0x400 #define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset)))) -#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) -#define MAC_CONFIG_1_TX_ENABLE (0x00000001) -#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) -#define MAC_CONFIG_1_RX_ENABLE (0x00000004) -#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) -#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) -#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) -#define MAC_CONFIG_1_LOOP_BACK (0x00000100) -#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) -#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) -#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) -#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) -#define MAC_CONFIG_1_SIM_RESET (0x40000000) -#define MAC_CONFIG_1_SOFT_RESET (0x80000000) +#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) +#define MAC_CONFIG_1_TX_ENABLE (0x00000001) +#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) +#define MAC_CONFIG_1_RX_ENABLE (0x00000004) +#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) +#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) +#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) +#define MAC_CONFIG_1_LOOP_BACK (0x00000100) +#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) +#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) +#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) +#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) +#define MAC_CONFIG_1_SIM_RESET (0x40000000) +#define MAC_CONFIG_1_SOFT_RESET (0x80000000) -#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) -#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) -#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) -#define MAC_CONFIG_2_PAD_CRC (0x00000004) -#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) -#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) -#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) -#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) -#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ -#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ +#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) +#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) +#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) +#define MAC_CONFIG_2_PAD_CRC (0x00000004) +#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) +#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) +#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) +#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) +#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ +#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ -#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) +#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) -#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) -#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) -#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) -#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) -#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) +#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) +#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) +#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) +#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) +#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) -#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) -#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) -#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) +#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) +#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) +#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) -#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) -#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) -#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) +#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) +#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) +#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) -#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) -#define MII_MGMT_INDICATORS_BUSY (0x00000001) -#define MII_MGMT_INDICATORS_SCAN (0x00000002) -#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) +#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) +#define MII_MGMT_INDICATORS_BUSY (0x00000001) +#define MII_MGMT_INDICATORS_SCAN (0x00000002) +#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) -#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) -#define INTERFACE_STATUS_LINK_FAIL (0x00000008) -#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) +#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) +#define INTERFACE_STATUS_LINK_FAIL (0x00000008) +#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) -#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) -#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) +#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) +#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) -#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) -#define PORT_CONTROL_PRI (0x00000001) -#define PORT_CONTROL_BPT (0x00010000) -#define PORT_CONTROL_SPD (0x00040000) -#define PORT_CONTROL_RBC (0x00080000) -#define PORT_CONTROL_PRB (0x00200000) -#define PORT_CONTROL_DIS (0x00400000) -#define PORT_CONTROL_TBI (0x00800000) -#define PORT_CONTROL_STE (0x10000000) -#define PORT_CONTROL_ZOR (0x20000000) -#define PORT_CONTROL_CLR (0x40000000) -#define PORT_CONTROL_SRT (0x80000000) +#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) +#define PORT_CONTROL_PRI (0x00000001) +#define PORT_CONTROL_BPT (0x00010000) +#define PORT_CONTROL_SPD (0x00040000) +#define PORT_CONTROL_RBC (0x00080000) +#define PORT_CONTROL_PRB (0x00200000) +#define PORT_CONTROL_DIS (0x00400000) +#define PORT_CONTROL_TBI (0x00800000) +#define PORT_CONTROL_STE (0x10000000) +#define PORT_CONTROL_ZOR (0x20000000) +#define PORT_CONTROL_CLR (0x40000000) +#define PORT_CONTROL_SRT (0x80000000) -#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) -#define TX_CONFIG_START_Q (0x00000003) -#define TX_CONFIG_EHP (0x00400000) -#define TX_CONFIG_CHP (0x00800000) -#define TX_CONFIG_RST (0x80000000) +#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) +#define TX_CONFIG_START_Q (0x00000003) +#define TX_CONFIG_EHP (0x00400000) +#define TX_CONFIG_CHP (0x00800000) +#define TX_CONFIG_RST (0x80000000) -#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) -#define TX_CONTROL_GO (0x00008000) -#define TX_CONTROL_MP (0x01000000) -#define TX_CONTROL_EAI (0x20000000) -#define TX_CONTROL_ABT (0x40000000) -#define TX_CONTROL_EII (0x80000000) +#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) +#define TX_CONTROL_GO (0x00008000) +#define TX_CONTROL_MP (0x01000000) +#define TX_CONTROL_EAI (0x20000000) +#define TX_CONTROL_ABT (0x40000000) +#define TX_CONTROL_EII (0x80000000) -#define reg_TX_STATUS(base) __REG32(base, 0x00000228) -#define TX_STATUS_QUEUE_USABLE (0x0000000f) -#define TX_STATUS_CURR_Q (0x00000300) -#define TX_STATUS_ACT (0x00008000) -#define TX_STATUS_QUEUE_IDLE (0x000f0000) -#define TX_STATUS_EOQ_PENDING (0x0f000000) +#define reg_TX_STATUS(base) __REG32(base, 0x00000228) +#define TX_STATUS_QUEUE_USABLE (0x0000000f) +#define TX_STATUS_CURR_Q (0x00000300) +#define TX_STATUS_ACT (0x00008000) +#define TX_STATUS_QUEUE_IDLE (0x000f0000) +#define TX_STATUS_EOQ_PENDING (0x0f000000) -#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) -#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) -#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) -#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) +#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) +#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) +#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) +#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) -#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) +#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) #define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270) -#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) +#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) -#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) +#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) -#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) -#define TX_ERROR_STATUS (0x00000278) -#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) -#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) -#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) -#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) -#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) -#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) -#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) +#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) +#define TX_ERROR_STATUS (0x00000278) +#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) +#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) +#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) +#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) +#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) +#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) +#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) -#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) -#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define TX_QUEUE_0_CONFIG_AM (0x00004000) -#define TX_QUEUE_0_CONFIG_GVI (0x00008000) -#define TX_QUEUE_0_CONFIG_EEI (0x00010000) -#define TX_QUEUE_0_CONFIG_ELI (0x00020000) -#define TX_QUEUE_0_CONFIG_ENI (0x00040000) -#define TX_QUEUE_0_CONFIG_ESI (0x00080000) -#define TX_QUEUE_0_CONFIG_EDI (0x00100000) +#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) +#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define TX_QUEUE_0_CONFIG_AM (0x00004000) +#define TX_QUEUE_0_CONFIG_GVI (0x00008000) +#define TX_QUEUE_0_CONFIG_EEI (0x00010000) +#define TX_QUEUE_0_CONFIG_ELI (0x00020000) +#define TX_QUEUE_0_CONFIG_ENI (0x00040000) +#define TX_QUEUE_0_CONFIG_ESI (0x00080000) +#define TX_QUEUE_0_CONFIG_EDI (0x00100000) -#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) -#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) +#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) +#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) -#define OCN_PORT_HLP 0 /* HLP Interface */ -#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ +#define OCN_PORT_HLP 0 /* HLP Interface */ +#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ #define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */ -#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ -#define OCN_PORT_MEMORY 4 /* Memory Controller */ -#define OCN_PORT_DMA 5 /* DMA Controller */ -#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ -#define OCN_PORT_PRINT 7 /* Print Engine Interface */ +#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ +#define OCN_PORT_MEMORY 4 /* Memory Controller */ +#define OCN_PORT_DMA 5 /* DMA Controller */ +#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ +#define OCN_PORT_PRINT 7 /* Print Engine Interface */ -#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) +#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) -#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) -#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) +#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) +#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) -#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) -#define RX_CONFIG_DEF_Q (0x00000003) -#define RX_CONFIG_EMF (0x00000100) -#define RX_CONFIG_EUF (0x00000200) -#define RX_CONFIG_BFE (0x00000400) -#define RX_CONFIG_MFE (0x00000800) -#define RX_CONFIG_UFE (0x00001000) -#define RX_CONFIG_SE (0x00002000) -#define RX_CONFIG_ABF (0x00200000) -#define RX_CONFIG_APE (0x00400000) -#define RX_CONFIG_CHP (0x00800000) -#define RX_CONFIG_RST (0x80000000) +#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) +#define RX_CONFIG_DEF_Q (0x00000003) +#define RX_CONFIG_EMF (0x00000100) +#define RX_CONFIG_EUF (0x00000200) +#define RX_CONFIG_BFE (0x00000400) +#define RX_CONFIG_MFE (0x00000800) +#define RX_CONFIG_UFE (0x00001000) +#define RX_CONFIG_SE (0x00002000) +#define RX_CONFIG_ABF (0x00200000) +#define RX_CONFIG_APE (0x00400000) +#define RX_CONFIG_CHP (0x00800000) +#define RX_CONFIG_RST (0x80000000) -#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) -#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) -#define GE_E0_RX_CONTROL_GO (0x00008000) -#define GE_E0_RX_CONTROL_EAI (0x20000000) -#define GE_E0_RX_CONTROL_ABT (0x40000000) -#define GE_E0_RX_CONTROL_EII (0x80000000) +#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) +#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) +#define GE_E0_RX_CONTROL_GO (0x00008000) +#define GE_E0_RX_CONTROL_EAI (0x20000000) +#define GE_E0_RX_CONTROL_ABT (0x40000000) +#define GE_E0_RX_CONTROL_EII (0x80000000) -#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) -#define RX_EXTENDED_STATUS (0x0000032c) -#define RX_EXTENDED_STATUS_EOQ (0x0000000f) -#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) -#define RX_EXTENDED_STATUS_EOF (0x00000f00) -#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) +#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) +#define RX_EXTENDED_STATUS (0x0000032c) +#define RX_EXTENDED_STATUS_EOQ (0x0000000f) +#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) +#define RX_EXTENDED_STATUS_EOF (0x00000f00) +#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) -#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) +#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) -#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) -#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) +#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) +#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) -#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) +#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) -#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) -#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define RX_QUEUE_0_CONFIG_AM (0x00004000) -#define RX_QUEUE_0_CONFIG_EEI (0x00010000) -#define RX_QUEUE_0_CONFIG_ELI (0x00020000) -#define RX_QUEUE_0_CONFIG_ENI (0x00040000) -#define RX_QUEUE_0_CONFIG_ESI (0x00080000) -#define RX_QUEUE_0_CONFIG_EDI (0x00100000) +#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) +#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define RX_QUEUE_0_CONFIG_AM (0x00004000) +#define RX_QUEUE_0_CONFIG_EEI (0x00010000) +#define RX_QUEUE_0_CONFIG_ELI (0x00020000) +#define RX_QUEUE_0_CONFIG_ENI (0x00040000) +#define RX_QUEUE_0_CONFIG_ESI (0x00080000) +#define RX_QUEUE_0_CONFIG_EDI (0x00100000) -#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) -#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) +#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) +#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) -#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) +#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) -#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) -#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) +#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) +#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) /* * PHY register definitions */ /* the first 15 PHY registers are standard. */ -#define PHY_CTRL_REG 0 /* Control Register */ -#define PHY_STATUS_REG 1 /* Status Regiser */ -#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ -#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ -#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ -#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ +#define PHY_CTRL_REG 0 /* Control Register */ +#define PHY_STATUS_REG 1 /* Status Regiser */ +#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ +#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ +#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ +#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ /* * PHY Register bit masks. */ -#define PHY_CTRL_RESET (1 << 15) -#define PHY_CTRL_LOOPBACK (1 << 14) -#define PHY_CTRL_SPEED0 (1 << 13) -#define PHY_CTRL_AN_EN (1 << 12) -#define PHY_CTRL_PWR_DN (1 << 11) -#define PHY_CTRL_ISOLATE (1 << 10) -#define PHY_CTRL_RESTART_AN (1 << 9) -#define PHY_CTRL_FULL_DUPLEX (1 << 8) -#define PHY_CTRL_CT_EN (1 << 7) -#define PHY_CTRL_SPEED1 (1 << 6) +#define PHY_CTRL_RESET (1 << 15) +#define PHY_CTRL_LOOPBACK (1 << 14) +#define PHY_CTRL_SPEED0 (1 << 13) +#define PHY_CTRL_AN_EN (1 << 12) +#define PHY_CTRL_PWR_DN (1 << 11) +#define PHY_CTRL_ISOLATE (1 << 10) +#define PHY_CTRL_RESTART_AN (1 << 9) +#define PHY_CTRL_FULL_DUPLEX (1 << 8) +#define PHY_CTRL_CT_EN (1 << 7) +#define PHY_CTRL_SPEED1 (1 << 6) -#define PHY_STAT_100BASE_T4 (1 << 15) -#define PHY_STAT_100BASE_X_FD (1 << 14) -#define PHY_STAT_100BASE_X_HD (1 << 13) -#define PHY_STAT_10BASE_T_FD (1 << 12) -#define PHY_STAT_10BASE_T_HD (1 << 11) -#define PHY_STAT_100BASE_T2_FD (1 << 10) -#define PHY_STAT_100BASE_T2_HD (1 << 9) -#define PHY_STAT_EXT_STAT (1 << 8) -#define PHY_STAT_RESERVED (1 << 7) -#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ -#define PHY_STAT_AN_COMPLETE (1 << 5) -#define PHY_STAT_REM_FAULT (1 << 4) -#define PHY_STAT_AN_CAP (1 << 3) -#define PHY_STAT_LINK_UP (1 << 2) -#define PHY_STAT_JABBER (1 << 1) -#define PHY_STAT_EXT_CAP (1 << 0) +#define PHY_STAT_100BASE_T4 (1 << 15) +#define PHY_STAT_100BASE_X_FD (1 << 14) +#define PHY_STAT_100BASE_X_HD (1 << 13) +#define PHY_STAT_10BASE_T_FD (1 << 12) +#define PHY_STAT_10BASE_T_HD (1 << 11) +#define PHY_STAT_100BASE_T2_FD (1 << 10) +#define PHY_STAT_100BASE_T2_HD (1 << 9) +#define PHY_STAT_EXT_STAT (1 << 8) +#define PHY_STAT_RESERVED (1 << 7) +#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ +#define PHY_STAT_AN_COMPLETE (1 << 5) +#define PHY_STAT_REM_FAULT (1 << 4) +#define PHY_STAT_AN_CAP (1 << 3) +#define PHY_STAT_LINK_UP (1 << 2) +#define PHY_STAT_JABBER (1 << 1) +#define PHY_STAT_EXT_CAP (1 << 0) -#define TBI_CONTROL_2 0x11 -#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 -#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 -#define TBI_CONTROL_2_G_MII_MODE 0x0010 -#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 -#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 -#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 -#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 -#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 -#define TBI_CONTROL_2_SOFT_RESET 0x8000 +#define TBI_CONTROL_2 0x11 +#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 +#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 +#define TBI_CONTROL_2_G_MII_MODE 0x0010 +#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 +#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 +#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 +#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 +#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 +#define TBI_CONTROL_2_SOFT_RESET 0x8000 /* marvel specific */ -#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ -#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ -#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ +#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ +#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ +#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ /* * MARVELL 88E1111 PHY register bit masks */ /* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */ -#define SPEC_STAT_SPEED_MASK (3 << 14) -#define SPEC_STAT_FULL_DUP (1 << 13) -#define SPEC_STAT_PAGE_RCVD (1 << 12) -#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ -#define SPEC_STAT_LINK_UP (1 << 10) -#define SPEC_STAT_CABLE_LEN_MASK (7 << 7) /* Cable Length (100/1000 modes only) */ -#define SPEC_STAT_MDIX (1 << 6) -#define SPEC_STAT_POLARITY (1 << 1) -#define SPEC_STAT_JABBER (1 << 0) +#define SPEC_STAT_SPEED_MASK (3 << 14) +#define SPEC_STAT_FULL_DUP (1 << 13) +#define SPEC_STAT_PAGE_RCVD (1 << 12) +#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ +#define SPEC_STAT_LINK_UP (1 << 10) +#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */ +#define SPEC_STAT_MDIX (1 << 6) +#define SPEC_STAT_POLARITY (1 << 1) +#define SPEC_STAT_JABBER (1 << 0) -#define SPEED_1000 (2 << 14) -#define SPEED_100 (1 << 14) -#define SPEED_10 (0 << 14) +#define SPEED_1000 (2 << 14) +#define SPEED_100 (1 << 14) +#define SPEED_10 (0 << 14) -#define TBI_ADDR 0x1E /* Ten Bit Interface address */ +#define TBI_ADDR 0x1E /* Ten Bit Interface address */ /* negotiated link parameters */ -#define LINK_SPEED_UNKNOWN 0 -#define LINK_SPEED_10 1 -#define LINK_SPEED_100 2 -#define LINK_SPEED_1000 3 +#define LINK_SPEED_UNKNOWN 0 +#define LINK_SPEED_10 1 +#define LINK_SPEED_100 2 +#define LINK_SPEED_1000 3 -#define LINK_DUPLEX_UNKNOWN 0 -#define LINK_DUPLEX_HALF 1 -#define LINK_DUPLEX_FULL 2 +#define LINK_DUPLEX_UNKNOWN 0 +#define LINK_DUPLEX_HALF 1 +#define LINK_DUPLEX_FULL 2 static unsigned int phy_address[] = { 8, 9 }; @@ -390,56 +392,56 @@ struct dma_descriptor { }; /* last next descriptor address flag */ -#define DMA_DESCR_LAST (1 << 31) +#define DMA_DESCR_LAST (1 << 31) /* TX DMA descriptor config status bits */ -#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ -#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ -#define DMA_DESCR_TX_PFVLAN (1 << 2) -#define DMA_DESCR_TX_HUGE (1 << 3) -#define DMA_DESCR_TX_PAD (1 << 4) -#define DMA_DESCR_TX_CRC (1 << 5) -#define DMA_DESCR_TX_DESCR_INT (1 << 14) -#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 -#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) -#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) -#define DMA_DESCR_TX_UNDERRUN (1 << 25) -#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) -#define DMA_DESCR_TX_OK (1 << 30) -#define DMA_DESCR_TX_OWNER (1 << 31) +#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ +#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ +#define DMA_DESCR_TX_PFVLAN (1 << 2) +#define DMA_DESCR_TX_HUGE (1 << 3) +#define DMA_DESCR_TX_PAD (1 << 4) +#define DMA_DESCR_TX_CRC (1 << 5) +#define DMA_DESCR_TX_DESCR_INT (1 << 14) +#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 +#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) +#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) +#define DMA_DESCR_TX_UNDERRUN (1 << 25) +#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) +#define DMA_DESCR_TX_OK (1 << 30) +#define DMA_DESCR_TX_OWNER (1 << 31) /* RX DMA descriptor status bits */ -#define DMA_DESCR_RX_EOF (1 << 0) -#define DMA_DESCR_RX_SOF (1 << 1) -#define DMA_DESCR_RX_VTF (1 << 2) -#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) -#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) -#define DMA_DESCR_RX_HASH_MATCH (1 << 7) -#define DMA_DESCR_RX_BAD_FRAME (1 << 8) -#define DMA_DESCR_RX_OVERRUN (1 << 9) -#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) -#define DMA_DESCR_RX_CRC_ERROR (1 << 12) -#define DMA_DESCR_RX_DESCR_INT (1 << 13) -#define DMA_DESCR_RX_OWNER (1 << 15) +#define DMA_DESCR_RX_EOF (1 << 0) +#define DMA_DESCR_RX_SOF (1 << 1) +#define DMA_DESCR_RX_VTF (1 << 2) +#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) +#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) +#define DMA_DESCR_RX_HASH_MATCH (1 << 7) +#define DMA_DESCR_RX_BAD_FRAME (1 << 8) +#define DMA_DESCR_RX_OVERRUN (1 << 9) +#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) +#define DMA_DESCR_RX_CRC_ERROR (1 << 12) +#define DMA_DESCR_RX_DESCR_INT (1 << 13) +#define DMA_DESCR_RX_OWNER (1 << 15) -#define RX_BUFFER_SIZE PKTSIZE -#define NUM_RX_DESC PKTBUFSRX +#define RX_BUFFER_SIZE PKTSIZE +#define NUM_RX_DESC PKTBUFSRX static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32))); static struct dma_descriptor rx_descr_array[NUM_RX_DESC] - __attribute__ ((aligned(32))); + __attribute__ ((aligned(32))); static struct dma_descriptor *rx_descr_current; -static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis); -static int tsi108_eth_send(struct eth_device *dev, +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis); +static int tsi108_eth_send (struct eth_device *dev, volatile void *packet, int length); -static int tsi108_eth_recv(struct eth_device *dev); -static void tsi108_eth_halt(struct eth_device *dev); -static unsigned int read_phy(unsigned int base, +static int tsi108_eth_recv (struct eth_device *dev); +static void tsi108_eth_halt (struct eth_device *dev); +static unsigned int read_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg); -static void write_phy(unsigned int base, +static void write_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg, unsigned int phy_data); @@ -447,15 +449,15 @@ static void write_phy(unsigned int base, /* * print phy debug infomation */ -static void dump_phy_regs(unsigned int phy_addr) +static void dump_phy_regs (unsigned int phy_addr) { int i; - printf("PHY %d registers\n", phy_addr); + printf ("PHY %d registers\n", phy_addr); for (i = 0; i <= 30; i++) { - printf("%2d 0x%04x\n", i, read_phy(ETH_BASE, phy_addr, i)); + printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i)); } - printf("\n"); + printf ("\n"); } #else @@ -466,27 +468,27 @@ static void dump_phy_regs(unsigned int phy_addr) /* * print debug infomation */ -static void tx_diag_regs(unsigned int base) +static void tx_diag_regs (unsigned int base) { int i; unsigned long dummy; - printf("TX diagnostics registers\n"); + printf ("TX diagnostics registers\n"); reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_TX_DIAGNOSTIC_DATA(base); for (i = 0x00; i <= 0x05; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); } reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_TX_DIAGNOSTIC_DATA(base); for (i = 0x40; i <= 0x47; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); } - printf("\n"); + printf ("\n"); } #else @@ -497,27 +499,27 @@ static void tx_diag_regs(unsigned int base) /* * print debug infomation */ -static void rx_diag_regs(unsigned int base) +static void rx_diag_regs (unsigned int base) { int i; unsigned long dummy; - printf("RX diagnostics registers\n"); + printf ("RX diagnostics registers\n"); reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_RX_DIAGNOSTIC_DATA(base); for (i = 0x00; i <= 0x05; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); } reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_RX_DIAGNOSTIC_DATA(base); for (i = 0x08; i <= 0x0a; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); } - printf("\n"); + printf ("\n"); } #else @@ -528,15 +530,15 @@ static void rx_diag_regs(unsigned int base) /* * print debug infomation */ -static void debug_mii_regs(unsigned int base) +static void debug_mii_regs (unsigned int base) { - printf("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); - printf("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); - printf("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); - printf("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); - printf("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); - printf("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); - printf("\n"); + printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); + printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); + printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); + printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); + printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); + printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); + printf ("\n"); } #else @@ -546,15 +548,15 @@ static void debug_mii_regs(unsigned int base) /* * Wait until the phy bus is non-busy */ -static void phy_wait(unsigned int base, unsigned int condition) +static void phy_wait (unsigned int base, unsigned int condition) { int timeout; timeout = 0; while (reg_MII_MGMT_INDICATORS(base) & condition) { - udelay(10); + udelay (10); if (++timeout > 10000) { - printf("ERROR: timeout waiting for phy bus (%d)\n", + printf ("ERROR: timeout waiting for phy bus (%d)\n", condition); break; } @@ -564,12 +566,12 @@ static void phy_wait(unsigned int base, unsigned int condition) /* * read phy register */ -static unsigned int read_phy(unsigned int base, +static unsigned int read_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg) { unsigned int value; - phy_wait(base, MII_MGMT_INDICATORS_BUSY); + phy_wait (base, MII_MGMT_INDICATORS_BUSY); reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; @@ -580,7 +582,7 @@ static unsigned int read_phy(unsigned int base, reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE; /* wait for the read to complete */ - phy_wait(base, + phy_wait (base, MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY); value = reg_MII_MGMT_STATUS(base); @@ -593,11 +595,11 @@ static unsigned int read_phy(unsigned int base, /* * write phy register */ -static void write_phy(unsigned int base, +static void write_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg, unsigned int phy_data) { - phy_wait(base, MII_MGMT_INDICATORS_BUSY); + phy_wait (base, MII_MGMT_INDICATORS_BUSY); reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; @@ -611,7 +613,7 @@ static void write_phy(unsigned int base, /* * configure the marvell 88e1111 phy */ -static int marvell_88e_phy_config(struct eth_device *dev, int *speed, +static int marvell_88e_phy_config (struct eth_device *dev, int *speed, int *duplex) { unsigned long base; @@ -630,40 +632,39 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, phy_addr = (unsigned long)dev->priv; /* Take the PHY out of reset. */ - write_phy(ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); + write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); /* Wait for the reset process to complete. */ - udelay(10); + udelay (10); timeout = 0; while ((phy_status = - read_phy(ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { - udelay(10); + read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { + udelay (10); if (++timeout > 10000) { - printf("ERROR: timeout waiting for phy reset\n"); + printf ("ERROR: timeout waiting for phy reset\n"); break; } } /* TBI Configuration. */ - write_phy(base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | + write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | TBI_CONTROL_2_RECEIVE_CLOCK_SELECT); /* Wait for the link to be established. */ timeout = 0; do { - udelay(20000); - phy_status = read_phy(ETH_BASE, phy_addr, PHY_STATUS_REG); + udelay (20000); + phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG); if (++timeout > 100) { debug_lev(1, "ERROR: unable to establish link!!!\n"); break; } } while ((phy_status & PHY_STAT_LINK_UP) == 0); - if ((phy_status & PHY_STAT_LINK_UP) == 0) { + if ((phy_status & PHY_STAT_LINK_UP) == 0) return 0; - } value = 0; - phy_spec_status = read_phy(ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); if (phy_spec_status & SPEC_STAT_RESOLVED) { switch (phy_spec_status & SPEC_STAT_SPEED_MASK) { case SPEED_1000: @@ -681,45 +682,41 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, if (phy_spec_status & SPEC_STAT_FULL_DUP) { phy_duplex = LINK_DUPLEX_FULL; value |= PHY_CTRL_FULL_DUPLEX; - } else { + } else phy_duplex = LINK_DUPLEX_HALF; - } } /* set TBI speed */ - write_phy(base, TBI_ADDR, PHY_CTRL_REG, value); - write_phy(base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); + write_phy (base, TBI_ADDR, PHY_CTRL_REG, value); + write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); #if TSI108_ETH_DEBUG > 0 - printf("%s link is up", dev->name); - phy_spec_status = read_phy(ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + printf ("%s link is up", dev->name); + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); if (phy_spec_status & SPEC_STAT_RESOLVED) { switch (phy_speed) { case LINK_SPEED_1000: - printf(", 1000 Mbps"); + printf (", 1000 Mbps"); break; case LINK_SPEED_100: - printf(", 100 Mbps"); + printf (", 100 Mbps"); break; case LINK_SPEED_10: - printf(", 10 Mbps"); + printf (", 10 Mbps"); break; } - if (phy_duplex == LINK_DUPLEX_FULL) { - printf(", Full duplex"); - } else { - printf(", Half duplex"); - } + if (phy_duplex == LINK_DUPLEX_FULL) + printf (", Full duplex"); + else + printf (", Half duplex"); } - printf("\n"); + printf ("\n"); #endif - dump_phy_regs(TBI_ADDR); - if (speed) { + dump_phy_regs (TBI_ADDR); + if (speed) *speed = phy_speed; - } - if (duplex) { + if (duplex) *duplex = phy_duplex; - } return 1; } @@ -729,7 +726,7 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, * * register the tsi108 ethernet controllers with the multi-ethernet system */ -int tsi108_eth_initialize(bd_t * bis) +int tsi108_eth_initialize (bd_t * bis) { struct eth_device *dev; int index; @@ -737,7 +734,7 @@ int tsi108_eth_initialize(bd_t * bis) for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) { dev = (struct eth_device *)malloc(sizeof(struct eth_device)); - sprintf(dev->name, "TSI108_eth%d", index); + sprintf (dev->name, "TSI108_eth%d", index); dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET); dev->priv = (void *)(phy_address[index]); @@ -754,7 +751,7 @@ int tsi108_eth_initialize(bd_t * bis) /* * probe for and initialize a single ethernet interface */ -static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis) { unsigned long base; unsigned long value; @@ -794,25 +791,23 @@ static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16); - if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) { + if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) return 0; - } value = MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC | MAC_CONFIG_2_CRC_ENABLE; - if (speed == LINK_SPEED_1000) { + if (speed == LINK_SPEED_1000) value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE); - } else { + else { value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE); reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD; } if (duplex == LINK_DUPLEX_FULL) { value |= MAC_CONFIG_2_FULL_DUPLEX; reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT; - } else { + } else reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT; - } reg_MAC_CONFIG_2(base) = value; reg_RX_CONFIG(base) = RX_CONFIG_SE; @@ -875,7 +870,7 @@ static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) /* * send a packet */ -static int tsi108_eth_send(struct eth_device *dev, +static int tsi108_eth_send (struct eth_device *dev, volatile void *packet, int length) { unsigned long base; @@ -894,9 +889,8 @@ static int tsi108_eth_send(struct eth_device *dev, (unsigned long)tx_descr + sizeof(struct dma_descriptor)); - if (timeout != 0) { - udelay(15); - } + if (timeout != 0) + udelay (15); if (++timeout > 10000) { tx_diag_regs(base); debug_lev(1, @@ -908,7 +902,7 @@ static int tsi108_eth_send(struct eth_device *dev, status = le32_to_cpu(tx_descr->config_status); if ((status & DMA_DESCR_TX_OK) == 0) { #ifdef TX_PRINT_ERRORS - printf("TX packet error: 0x%08x\n %s%s%s%s\n", status, + printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status, status & DMA_DESCR_TX_OK ? "tx error, " : "", status & DMA_DESCR_TX_RETRY_LIMIT ? "retry limit reached, " : "", @@ -918,7 +912,7 @@ static int tsi108_eth_send(struct eth_device *dev, #endif } - debug_lev(9, "sending packet %d\n", length); + debug_lev (9, "sending packet %d\n", length); tx_descr->start_addr0 = cpu_to_le32((vuint32) packet); tx_descr->start_addr1 = 0; tx_descr->next_descr_addr0 = 0; @@ -946,7 +940,7 @@ static int tsi108_eth_send(struct eth_device *dev, /* * Check for received packets and send them up the protocal stack */ -static int tsi108_eth_recv(struct eth_device *dev) +static int tsi108_eth_recv (struct eth_device *dev) { struct dma_descriptor *rx_descr; unsigned long base; @@ -957,7 +951,7 @@ static int tsi108_eth_recv(struct eth_device *dev) base = dev->iobase; /* make sure we see the changes made by the DMA engine */ - invalidate_dcache_range((unsigned long)rx_descr_array, + invalidate_dcache_range ((unsigned long)rx_descr_array, (unsigned long)rx_descr_array + sizeof(rx_descr_array)); @@ -968,7 +962,7 @@ static int tsi108_eth_recv(struct eth_device *dev) status = le32_to_cpu(rx_descr->config_status); if (status & DMA_DESCR_RX_BAD_FRAME) { #ifdef RX_PRINT_ERRORS - printf("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", + printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", status, status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " : "", @@ -989,24 +983,23 @@ static int tsi108_eth_recv(struct eth_device *dev) /*** process packet ***/ buffer = (volatile uchar - *)(le32_to_cpu(rx_descr->start_addr0)); - NetReceive(buffer, length); + *)(le32_to_cpu (rx_descr->start_addr0)); + NetReceive (buffer, length); - invalidate_dcache_range((unsigned long)buffer, + invalidate_dcache_range ((unsigned long)buffer, (unsigned long)buffer + RX_BUFFER_SIZE); } /* Give this buffer back to the DMA engine */ rx_descr->vlan_byte_count = 0; - rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) | + rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) | DMA_DESCR_RX_OWNER); /* move descriptor pointer forward */ rx_descr = (struct dma_descriptor - *)(le32_to_cpu(rx_descr->next_descr_addr0)); - if (rx_descr == 0) { + *)(le32_to_cpu (rx_descr->next_descr_addr0)); + if (rx_descr == 0) rx_descr = &rx_descr_array[0]; - } } /* remember where we are for next time */ rx_descr_current = rx_descr; @@ -1026,7 +1019,7 @@ static int tsi108_eth_recv(struct eth_device *dev) /* * disable an ethernet interface */ -static void tsi108_eth_halt(struct eth_device *dev) +static void tsi108_eth_halt (struct eth_device *dev) { unsigned long base; diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c index 08e5e3b4f5..c100cb8247 100644 --- a/drivers/tsi108_i2c.c +++ b/drivers/tsi108_i2c.c @@ -23,19 +23,18 @@ */ #include +#include #ifdef CONFIG_TSI108_I2C - -#include #include #if (CONFIG_COMMANDS & CFG_CMD_I2C) -#define I2C_DELAY 100000 +#define I2C_DELAY 100000 #undef DEBUG_I2C #ifdef DEBUG_I2C -#define DPRINT(x) printf(x) +#define DPRINT(x) printf (x) #else #define DPRINT(x) #endif @@ -43,7 +42,7 @@ /* All functions assume that Tsi108 I2C block is the only master on the bus */ /* I2C read helper function */ -static int i2c_read_byte( +static int i2c_read_byte ( uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */ uchar chip_addr,/* I2C device address on the bus */ uint byte_addr, /* Byte address within I2C device */ @@ -55,19 +54,17 @@ static int i2c_read_byte( u32 op_status = TSI108_I2C_TIMEOUT_ERR; u32 chan_offset = TSI108_I2C_OFFSET; - DPRINT(("I2C read_byte() %d 0x%02x 0x%02x\n", + DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n", i2c_chan, chip_addr, byte_addr)); - if (0 != i2c_chan) { + if (0 != i2c_chan) chan_offset = TSI108_I2C_SDRAM_OFFSET; - } /* Check if I2C operation is in progress */ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2); if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | - I2C_CNTRL2_START)) - ) { + I2C_CNTRL2_START))) { /* Set device address and operation (read = 0) */ temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F); @@ -75,7 +72,7 @@ static int i2c_read_byte( temp; /* Issue the read command - * (at this moment all other parameters are 0 + * (at this moment all other parameters are 0 * (size = 1 byte, lane = 0) */ @@ -108,7 +105,7 @@ static int i2c_read_byte( /* report HW error */ op_status = TSI108_I2C_IF_ERROR; - DPRINT(("I2C HW error reported: 0x%02x\n", temp)); + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); } break; @@ -117,20 +114,20 @@ static int i2c_read_byte( } else { op_status = TSI108_I2C_IF_BUSY; - DPRINT(("I2C Transaction start failed: 0x%02x\n", temp)); + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); } - DPRINT(("I2C read_byte() status: 0x%02x\n", op_status)); + DPRINT (("I2C read_byte() status: 0x%02x\n", op_status)); return op_status; } -/* +/* * I2C Read interface as defined in "include/i2c.h" : * chip_addr: I2C chip address, range 0..127 * (to read from SPD channel EEPROM use (0xD0 ... 0xD7) * NOTE: The bit 7 in the chip_addr serves as a channel select. * This hack is for enabling "isdram" command on Tsi108 boards - * without changes to common code. Used for I2C reads only. + * without changes to common code. Used for I2C reads only. * byte_addr: Memory or register address within the chip * alen: Number of bytes to use for addr (typically 1, 2 for larger * memories, 0 for register type devices with only one @@ -141,7 +138,8 @@ static int i2c_read_byte( * Returns: 0 on success, not 0 on failure */ -int i2c_read(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) +int i2c_read (uchar chip_addr, uint byte_addr, int alen, + uchar * buffer, int len) { u32 op_status = TSI108_I2C_PARAM_ERR; u32 i2c_if = 0; @@ -159,20 +157,20 @@ int i2c_read(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) buffer++); if (TSI108_I2C_SUCCESS != op_status) { - DPRINT(("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len)); + DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len)); break; } } } - DPRINT(("I2C read() status: 0x%02x\n", op_status)); + DPRINT (("I2C read() status: 0x%02x\n", op_status)); return op_status; } /* I2C write helper function */ -static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ +static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */ uint byte_addr, /* Byte address within I2C device */ uchar * buffer /* pointer to data buffer */ ) @@ -210,7 +208,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ /* Wait until operation completed */ do { - // Read I2C operation status + /* Read I2C operation status */ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2); @@ -227,7 +225,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ /* report detected HW error */ op_status = TSI108_I2C_IF_ERROR; - DPRINT(("I2C HW error reported: 0x%02x\n", temp)); + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); } break; @@ -237,13 +235,13 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ } else { op_status = TSI108_I2C_IF_BUSY; - DPRINT(("I2C Transaction start failed: 0x%02x\n", temp)); + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); } return op_status; } -/* +/* * I2C Write interface as defined in "include/i2c.h" : * chip_addr: I2C chip address, range 0..127 * byte_addr: Memory or register address within the chip @@ -256,7 +254,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ * Returns: 0 on success, not 0 on failure */ -int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, +int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) { u32 op_status = TSI108_I2C_PARAM_ERR; @@ -265,10 +263,10 @@ int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) { while (len--) { op_status = - i2c_write_byte(chip_addr, byte_addr++, buffer++); + i2c_write_byte (chip_addr, byte_addr++, buffer++); if (TSI108_I2C_SUCCESS != op_status) { - DPRINT(("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len)); + DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len)); break; } @@ -278,13 +276,13 @@ int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, return op_status; } -/* +/* * I2C interface function as defined in "include/i2c.h". * Probe the given I2C chip address by reading single byte from offset 0. * Returns 0 if a chip responded, not 0 on failure. */ -int i2c_probe(uchar chip) +int i2c_probe (uchar chip) { u32 tmp; @@ -293,8 +291,8 @@ int i2c_probe(uchar chip) * The Tsi108 HW doesn't support sending just the chip address * and checkong for an back. */ - return i2c_read(chip, 0, 1, (char *)&tmp, 1); + return i2c_read (chip, 0, 1, (char *)&tmp, 1); } -#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */ +#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */ #endif /* CONFIG_TSI108_I2C */ diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c index f374ede662..9f606df518 100644 --- a/drivers/tsi108_pci.c +++ b/drivers/tsi108_pci.c @@ -36,7 +36,7 @@ struct pci_controller local_hose; -void tsi108_clear_pci_error(void) +void tsi108_clear_pci_error (void) { u32 err_stat, err_addr, pci_stat; @@ -79,11 +79,11 @@ void tsi108_clear_pci_error(void) return; } -unsigned int __get_pci_config_dword(u32 addr) +unsigned int __get_pci_config_dword (u32 addr) { unsigned int retval; - __asm__ __volatile__(" lwbrx %0,0,%1\n" + __asm__ __volatile__ (" lwbrx %0,0,%1\n" "1: eieio\n" "2:\n" ".section .fixup,\"ax\"\n" @@ -97,53 +97,53 @@ unsigned int __get_pci_config_dword(u32 addr) return (retval); } -static int tsi108_read_config_dword(struct pci_controller *hose, +static int tsi108_read_config_dword (struct pci_controller *hose, pci_dev_t dev, int offset, u32 * value) { dev &= (CFG_PCI_CFG_SIZE - 1); dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); *value = __get_pci_config_dword(dev); if (0xFFFFFFFF == *value) - tsi108_clear_pci_error(); + tsi108_clear_pci_error (); return 0; } -static int tsi108_write_config_dword(struct pci_controller *hose, +static int tsi108_write_config_dword (struct pci_controller *hose, pci_dev_t dev, int offset, u32 value) { dev &= (CFG_PCI_CFG_SIZE - 1); dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); - out_le32((volatile unsigned *)dev, value); + out_le32 ((volatile unsigned *)dev, value); return 0; } -void pci_init_board(void) +void pci_init_board (void) { struct pci_controller *hose = (struct pci_controller *)&local_hose; hose->first_busno = 0; hose->last_busno = 0xff; - pci_set_region(hose->regions + 0, + pci_set_region (hose->regions + 0, CFG_PCI_MEMORY_BUS, CFG_PCI_MEMORY_PHYS, CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ - pci_set_region(hose->regions + 1, + pci_set_region (hose->regions + 1, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM); /* PCI I/O space */ - pci_set_region(hose->regions + 2, + pci_set_region (hose->regions + 2, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; - pci_set_ops(hose, + pci_set_ops (hose, pci_hose_read_config_byte_via_dword, pci_hose_read_config_word_via_dword, tsi108_read_config_dword, @@ -151,22 +151,22 @@ void pci_init_board(void) pci_hose_write_config_word_via_dword, tsi108_write_config_dword); - pci_register_hose(hose); + pci_register_hose (hose); - hose->last_busno = pci_hose_scan(hose); + hose->last_busno = pci_hose_scan (hose); - debug("Done PCI initialization\n"); + debug ("Done PCI initialization\n"); return; } #ifdef CONFIG_OF_FLAT_TREE void -ft_pci_setup(void *blob, bd_t *bd) +ft_pci_setup (void *blob, bd_t *bd) { u32 *p; int len; - p = (u32 *)ft_get_prop(blob, "/" OF_TSI "/pci@1000/bus-range", &len); + p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len); if (p != NULL) { p[0] = local_hose.first_busno; p[1] = local_hose.last_busno; diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 24cc86bebc..b13b699b59 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -24,12 +24,11 @@ * MA 02111-1307 USA */ -/**************************************************************** - * +/* * board specific configuration options for Freescale * MPC7448HPC2 (High-Performance Computing II) (Taiga) board * - ****************************************************************/ + */ #ifndef __CONFIG_H #define __CONFIG_H @@ -45,11 +44,11 @@ #define CONFIG_750FX /* this option to enable init of extended BATs */ #define CONFIG_ALTIVEC /* undef to disable */ -#define CFG_BOARD_NAME "MPC7448 HPC II" -#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" +#define CFG_BOARD_NAME "MPC7448 HPC II" +#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" -#define CFG_OCN_CLK 133000000 /* 133 MHz */ -#define CFG_CONFIG_BUS_CLK 133000000 +#define CFG_OCN_CLK 133000000 /* 133 MHz */ +#define CFG_CONFIG_BUS_CLK 133000000 #define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */ @@ -63,10 +62,10 @@ /* Default MAC Addresses for on-chip GIGE Controller */ -#define CONFIG_ETHADDR 00:06:D2:00:00:01 +#define CONFIG_ETHADDR 00:06:D2:00:00:01 #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:06:D2:00:00:02 +#define CONFIG_ETH1ADDR 00:06:D2:00:00:02 #define CONFIG_ENV_OVERWRITE @@ -75,12 +74,12 @@ * (easy to change) */ -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ /*#define CFG_HUSH_PARSER */ #undef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " /* Pass open firmware flat tree */ #define CONFIG_OF_FLAT_TREE 1 @@ -99,29 +98,30 @@ * for your console driver. * * what to do: - * If you have hacked a serial cable onto the second DUART channel, change the CFG_DUART port from 1 - * to 0 below. + * If you have hacked a serial cable onto the second DUART channel, + * change the CFG_DUART port from 1 to 0 below. * */ -#define CONFIG_CONS_INDEX 1 +#define CONFIG_CONS_INDEX 1 #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK CFG_OCN_CLK * 8 -#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808) -#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08) +#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808) +#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08) #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_ZERO_BOOTDELAY_CHECK #undef CONFIG_BOOTARGS -/*#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" */ +/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" + * to mount root filesystem over NFS;echo" */ #if (CONFIG_BOOTDELAY >= 0) -#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\ +#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\ setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; " @@ -130,34 +130,34 @@ #undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_SERIAL "No. 1" +#define CONFIG_SERIAL "No. 1" /* Networking Configuration */ -#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ +#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ #define CONFIG_TSI108_ETH -#define CONFIG_TSI108_ETH_NUM_PORTS 2 +#define CONFIG_TSI108_ETH_NUM_PORTS 2 #define CONFIG_NET_MULTI -#define CONFIG_IPADDR 172.27.234.48 -#define CONFIG_SERVERIP 172.27.234.10 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_GATEWAYIP 172.27.255.254 +#define CONFIG_IPADDR 172.27.234.48 +#define CONFIG_SERVERIP 172.27.234.10 +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_GATEWAYIP 172.27.255.254 -#define CONFIG_BOOTFILE zImage.initrd.elf -#define CONFIG_LOADADDR 0x400000 +#define CONFIG_BOOTFILE zImage.initrd.elf +#define CONFIG_LOADADDR 0x400000 /*-------------------------------------------------------------------------- */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ @@ -178,59 +178,59 @@ /*set date in u-boot*/ #define CONFIG_RTC_M48T35A -#define CFG_NVRAM_BASE_ADDR 0xfc000000 -#define CFG_NVRAM_SIZE 0x8000 +#define CFG_NVRAM_BASE_ADDR 0xfc000000 +#define CFG_NVRAM_SIZE 0x8000 /* * Miscellaneous configurable options */ -#define CONFIG_VERSION_VARIABLE 1 +#define CONFIG_VERSION_VARIABLE 1 #define CONFIG_TSI108_I2C -#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ /* #define CFG_DRAM_TEST - * DRAM tests - * CFG_DRAM_TEST - enables the following tests. + * DRAM tests + * CFG_DRAM_TEST - enables the following tests. * - * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. + * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines + * Environment variable 'test_dram_data' must be + * set to 'y'. + * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word + * is uniquely addressable. Environment variable + * 'test_dram_address' must be set to 'y'. + * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. + * This test takes about 6 minutes to test 64 MB. + * Environment variable 'test_dram_walk' must be + * set to 'y'. */ #undef CFG_DRAM_TEST -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ #if defined(CFG_DRAM_TEST) #define CFG_DRAM_TEST_DATA #define CFG_DRAM_TEST_ADDRESS #define CFG_DRAM_TEST_WALK -#endif /* CFG_DRAM_TEST */ +#endif /* CFG_DRAM_TEST */ -#define CFG_LOAD_ADDR 0x00400000 /* default load address */ +#define CFG_LOAD_ADDR 0x00400000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ /* * Low Level Configuration Settings @@ -246,12 +246,12 @@ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS * To an unused memory region. The stack will remain in cache until RAM * is initialized -*/ + */ #undef CFG_INIT_RAM_LOCK -#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ -#define CFG_INIT_RAM_END 0x4000 /* larger space - we have SDRAM initialized */ +#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ +#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ +#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /*----------------------------------------------------------------------- @@ -260,54 +260,54 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ -#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ +#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ +#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ -#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ -#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ +#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ +#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ -#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ +#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ -#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ +#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ -#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ +#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ -#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */ -#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ +#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */ +#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ #define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */ -#define PCI0_IO_BASE_BOOTM 0xfd000000 +#define PCI0_IO_BASE_BOOTM 0xfd000000 -#define CFG_RESET_ADDRESS 0x3fffff00 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CFG_RESET_ADDRESS 0x3fffff00 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ /* Peripheral Device section */ -/******************************************************* +/* * Resources on the Tsi108 - *******************************************************/ + */ -#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ -#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ +#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ +#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ #define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */ #undef DISABLE_PBM -/*----------------------------------------------------------------------- +/* * PCI stuff - *----------------------------------------------------------------------- + * */ #define CONFIG_PCI /* include pci support */ #define CONFIG_TSI108_PCI /* include tsi108 pci support */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -315,20 +315,20 @@ /* PCI MEMORY MAP section */ /* PCI view of System Memory */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x80000000 +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 /* PCI Memory Space */ -#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS) -#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) //CFG_PCI_MEM32_BASE = 0xE0000000 -#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ +#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS) +#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */ +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ /* PCI I/O Space */ -#define CFG_PCI_IO_BUS 0x00000000 -#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ +#define CFG_PCI_IO_BUS 0x00000000 +#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ -#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */ +#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */ #define _IO_BASE 0x00000000 /* points to PCI I/O space */ @@ -336,91 +336,91 @@ #define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ #define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */ -#define CFG_IBAT0U 0xFE0003FF -#define CFG_IBAT0L 0xFE000002 +#define CFG_IBAT0U 0xFE0003FF +#define CFG_IBAT0L 0xFE000002 -#define CFG_IBAT1U 0x00007FFF -#define CFG_IBAT1L 0x00000012 +#define CFG_IBAT1U 0x00007FFF +#define CFG_IBAT1L 0x00000012 -#define CFG_IBAT2U 0x80007FFF -#define CFG_IBAT2L 0x80000022 +#define CFG_IBAT2U 0x80007FFF +#define CFG_IBAT2L 0x80000022 -#define CFG_IBAT3U 0x00000000 -#define CFG_IBAT3L 0x00000000 +#define CFG_IBAT3U 0x00000000 +#define CFG_IBAT3L 0x00000000 -#define CFG_IBAT4U 0x00000000 -#define CFG_IBAT4L 0x00000000 +#define CFG_IBAT4U 0x00000000 +#define CFG_IBAT4L 0x00000000 -#define CFG_IBAT5U 0x00000000 -#define CFG_IBAT5L 0x00000000 +#define CFG_IBAT5U 0x00000000 +#define CFG_IBAT5L 0x00000000 -#define CFG_IBAT6U 0x00000000 -#define CFG_IBAT6L 0x00000000 +#define CFG_IBAT6U 0x00000000 +#define CFG_IBAT6L 0x00000000 -#define CFG_IBAT7U 0x00000000 -#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 -#define CFG_DBAT0U 0xE0003FFF -#define CFG_DBAT0L 0xE000002A +#define CFG_DBAT0U 0xE0003FFF +#define CFG_DBAT0L 0xE000002A -#define CFG_DBAT1U 0x00007FFF -#define CFG_DBAT1L 0x00000012 +#define CFG_DBAT1U 0x00007FFF +#define CFG_DBAT1L 0x00000012 -#define CFG_DBAT2U 0x00000000 -#define CFG_DBAT2L 0x00000000 +#define CFG_DBAT2U 0x00000000 +#define CFG_DBAT2L 0x00000000 -#define CFG_DBAT3U 0xC0000003 -#define CFG_DBAT3L 0xC000002A +#define CFG_DBAT3U 0xC0000003 +#define CFG_DBAT3L 0xC000002A -#define CFG_DBAT4U 0x00000000 -#define CFG_DBAT4L 0x00000000 +#define CFG_DBAT4U 0x00000000 +#define CFG_DBAT4L 0x00000000 -#define CFG_DBAT5U 0x00000000 -#define CFG_DBAT5L 0x00000000 +#define CFG_DBAT5U 0x00000000 +#define CFG_DBAT5L 0x00000000 -#define CFG_DBAT6U 0x00000000 -#define CFG_DBAT6L 0x00000000 +#define CFG_DBAT6U 0x00000000 +#define CFG_DBAT6L 0x00000000 -#define CFG_DBAT7U 0x00000000 -#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_DBAT7L 0x00000000 /* I2C addresses for the two DIMM SPD chips */ -#define DIMM0_I2C_ADDR 0x51 -#define DIMM1_I2C_ADDR 0x52 +#define DIMM0_I2C_ADDR 0x51 +#define DIMM1_I2C_ADDR 0x52 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ -#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ +#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #define CFG_FLASH_CFI_SWAP -#define PHYS_FLASH_SIZE 0x01000000 -#define CFG_MAX_FLASH_SECT (128) +#define PHYS_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_SECT (128) #define CFG_ENV_IS_IN_NVRAM -#define CFG_ENV_ADDR 0xFC000000 +#define CFG_ENV_ADDR 0xFC000000 -#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */ +#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -429,16 +429,16 @@ */ #undef CFG_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2_INIT | L2CR_L2E) +#define L2_INIT 0 +#define L2_ENABLE (L2_INIT | L2CR_L2E) /* * Internal Definitions * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_EXCEPTION_AFTER_RELOCATE #define CFG_SERIAL_HANG_IN_EXCEPTION -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/tsi108.h b/include/tsi108.h index 072daa03c3..ba62e7abe6 100644 --- a/include/tsi108.h +++ b/include/tsi108.h @@ -31,191 +31,191 @@ #ifndef _TSI108_H_ #define _TSI108_H_ -#define TSI108_HLP_REG_OFFSET (0x0000) -#define TSI108_PCI_REG_OFFSET (0x1000) -#define TSI108_CLK_REG_OFFSET (0x2000) -#define TSI108_PB_REG_OFFSET (0x3000) -#define TSI108_SD_REG_OFFSET (0x4000) -#define TSI108_MPIC_REG_OFFSET (0x7400) +#define TSI108_HLP_REG_OFFSET (0x0000) +#define TSI108_PCI_REG_OFFSET (0x1000) +#define TSI108_CLK_REG_OFFSET (0x2000) +#define TSI108_PB_REG_OFFSET (0x3000) +#define TSI108_SD_REG_OFFSET (0x4000) +#define TSI108_MPIC_REG_OFFSET (0x7400) -#define PB_ID (0x000) -#define PB_RSR (0x004) -#define PB_BUS_MS_SELECT (0x008) -#define PB_ISR (0x00C) -#define PB_ARB_CTRL (0x018) -#define PB_PVT_CTRL2 (0x034) -#define PB_SCR (0x400) -#define PB_ERRCS (0x404) -#define PB_AERR (0x408) -#define PB_REG_BAR (0x410) -#define PB_OCN_BAR1 (0x414) -#define PB_OCN_BAR2 (0x418) -#define PB_SDRAM_BAR1 (0x41C) -#define PB_SDRAM_BAR2 (0x420) -#define PB_MCR (0xC00) -#define PB_MCMD (0xC04) +#define PB_ID (0x000) +#define PB_RSR (0x004) +#define PB_BUS_MS_SELECT (0x008) +#define PB_ISR (0x00C) +#define PB_ARB_CTRL (0x018) +#define PB_PVT_CTRL2 (0x034) +#define PB_SCR (0x400) +#define PB_ERRCS (0x404) +#define PB_AERR (0x408) +#define PB_REG_BAR (0x410) +#define PB_OCN_BAR1 (0x414) +#define PB_OCN_BAR2 (0x418) +#define PB_SDRAM_BAR1 (0x41C) +#define PB_SDRAM_BAR2 (0x420) +#define PB_MCR (0xC00) +#define PB_MCMD (0xC04) -#define HLP_B0_ADDR (0x000) -#define HLP_B1_ADDR (0x010) -#define HLP_B2_ADDR (0x020) -#define HLP_B3_ADDR (0x030) +#define HLP_B0_ADDR (0x000) +#define HLP_B1_ADDR (0x010) +#define HLP_B2_ADDR (0x020) +#define HLP_B3_ADDR (0x030) -#define HLP_B0_MASK (0x004) -#define HLP_B1_MASK (0x014) -#define HLP_B2_MASK (0x024) -#define HLP_B3_MASK (0x034) +#define HLP_B0_MASK (0x004) +#define HLP_B1_MASK (0x014) +#define HLP_B2_MASK (0x024) +#define HLP_B3_MASK (0x034) -#define HLP_B0_CTRL0 (0x008) -#define HLP_B1_CTRL0 (0x018) -#define HLP_B2_CTRL0 (0x028) -#define HLP_B3_CTRL0 (0x038) +#define HLP_B0_CTRL0 (0x008) +#define HLP_B1_CTRL0 (0x018) +#define HLP_B2_CTRL0 (0x028) +#define HLP_B3_CTRL0 (0x038) -#define HLP_B0_CTRL1 (0x00C) -#define HLP_B1_CTRL1 (0x01C) -#define HLP_B2_CTRL1 (0x02C) -#define HLP_B3_CTRL1 (0x03C) +#define HLP_B0_CTRL1 (0x00C) +#define HLP_B1_CTRL1 (0x01C) +#define HLP_B2_CTRL1 (0x02C) +#define HLP_B3_CTRL1 (0x03C) -#define PCI_CSR (0x004) -#define PCI_P2O_BAR0 (0x010) -#define PCI_P2O_BAR0_UPPER (0x014) -#define PCI_P2O_BAR2 (0x018) -#define PCI_P2O_BAR2_UPPER (0x01C) -#define PCI_P2O_BAR3 (0x020) -#define PCI_P2O_BAR3_UPPER (0x024) +#define PCI_CSR (0x004) +#define PCI_P2O_BAR0 (0x010) +#define PCI_P2O_BAR0_UPPER (0x014) +#define PCI_P2O_BAR2 (0x018) +#define PCI_P2O_BAR2_UPPER (0x01C) +#define PCI_P2O_BAR3 (0x020) +#define PCI_P2O_BAR3_UPPER (0x024) -#define PCI_MISC_CSR (0x040) -#define PCI_P2O_PAGE_SIZES (0x04C) +#define PCI_MISC_CSR (0x040) +#define PCI_P2O_PAGE_SIZES (0x04C) -#define PCI_PCIX_STAT (0x0F4) +#define PCI_PCIX_STAT (0x0F4) -#define PCI_IRP_STAT (0x184) +#define PCI_IRP_STAT (0x184) -#define PCI_PFAB_BAR0 (0x204) -#define PCI_PFAB_BAR0_UPPER (0x208) -#define PCI_PFAB_IO (0x20C) -#define PCI_PFAB_IO_UPPER (0x210) +#define PCI_PFAB_BAR0 (0x204) +#define PCI_PFAB_BAR0_UPPER (0x208) +#define PCI_PFAB_IO (0x20C) +#define PCI_PFAB_IO_UPPER (0x210) -#define PCI_PFAB_MEM32 (0x214) -#define PCI_PFAB_MEM32_REMAP (0x218) -#define PCI_PFAB_MEM32_MASK (0x21C) +#define PCI_PFAB_MEM32 (0x214) +#define PCI_PFAB_MEM32_REMAP (0x218) +#define PCI_PFAB_MEM32_MASK (0x21C) -#define CG_PLL0_CTRL0 (0x210) -#define CG_PLL0_CTRL1 (0x214) -#define CG_PLL1_CTRL0 (0x220) -#define CG_PLL1_CTRL1 (0x224) -#define CG_PWRUP_STATUS (0x234) +#define CG_PLL0_CTRL0 (0x210) +#define CG_PLL0_CTRL1 (0x214) +#define CG_PLL1_CTRL0 (0x220) +#define CG_PLL1_CTRL1 (0x224) +#define CG_PWRUP_STATUS (0x234) #define MPIC_CSR(n) (0x30C + (n * 0x40)) -#define SD_CTRL (0x000) -#define SD_STATUS (0x004) -#define SD_TIMING (0x008) -#define SD_REFRESH (0x00C) -#define SD_INT_STATUS (0x010) -#define SD_INT_ENABLE (0x014) -#define SD_INT_SET (0x018) -#define SD_D0_CTRL (0x020) -#define SD_D1_CTRL (0x024) -#define SD_D0_BAR (0x028) -#define SD_D1_BAR (0x02C) -#define SD_ECC_CTRL (0x040) -#define SD_DLL_STATUS (0x250) +#define SD_CTRL (0x000) +#define SD_STATUS (0x004) +#define SD_TIMING (0x008) +#define SD_REFRESH (0x00C) +#define SD_INT_STATUS (0x010) +#define SD_INT_ENABLE (0x014) +#define SD_INT_SET (0x018) +#define SD_D0_CTRL (0x020) +#define SD_D1_CTRL (0x024) +#define SD_D0_BAR (0x028) +#define SD_D1_BAR (0x02C) +#define SD_ECC_CTRL (0x040) +#define SD_DLL_STATUS (0x250) -#define TS_SD_CTRL_ENABLE (1 << 31) +#define TS_SD_CTRL_ENABLE (1 << 31) -#define PB_ERRCS_ES (1 << 1) -#define PB_ISR_PBS_RD_ERR (1 << 8) -#define PCI_IRP_STAT_P_CSR (1 << 23) +#define PB_ERRCS_ES (1 << 1) +#define PB_ISR_PBS_RD_ERR (1 << 8) +#define PCI_IRP_STAT_P_CSR (1 << 23) -/* +/* * I2C : Register address offset definitions */ -#define I2C_CNTRL1 (0x00000000) -#define I2C_CNTRL2 (0x00000004) -#define I2C_RD_DATA (0x00000008) -#define I2C_TX_DATA (0x0000000c) +#define I2C_CNTRL1 (0x00000000) +#define I2C_CNTRL2 (0x00000004) +#define I2C_RD_DATA (0x00000008) +#define I2C_TX_DATA (0x0000000c) /* * I2C : Register Bit Masks and Reset Values - * definitions for every register + * definitions for every register */ /* I2C_CNTRL1 : Reset Value */ -#define I2C_CNTRL1_RESET_VALUE (0x0000000a) +#define I2C_CNTRL1_RESET_VALUE (0x0000000a) /* I2C_CNTRL1 : Register Bits Masks Definitions */ -#define I2C_CNTRL1_DEVCODE (0x0000000f) -#define I2C_CNTRL1_PAGE (0x00000700) -#define I2C_CNTRL1_BYTADDR (0x00ff0000) -#define I2C_CNTRL1_I2CWRITE (0x01000000) +#define I2C_CNTRL1_DEVCODE (0x0000000f) +#define I2C_CNTRL1_PAGE (0x00000700) +#define I2C_CNTRL1_BYTADDR (0x00ff0000) +#define I2C_CNTRL1_I2CWRITE (0x01000000) /* I2C_CNTRL1 : Read/Write Bit Mask Definition */ -#define I2C_CNTRL1_RWMASK (0x01ff070f) +#define I2C_CNTRL1_RWMASK (0x01ff070f) /* I2C_CNTRL1 : Unused/Reserved bits Definition */ -#define I2C_CNTRL1_RESERVED (0xfe00f8f0) +#define I2C_CNTRL1_RESERVED (0xfe00f8f0) /* I2C_CNTRL2 : Reset Value */ -#define I2C_CNTRL2_RESET_VALUE (0x00000000) +#define I2C_CNTRL2_RESET_VALUE (0x00000000) /* I2C_CNTRL2 : Register Bits Masks Definitions */ -#define I2C_CNTRL2_SIZE (0x00000003) -#define I2C_CNTRL2_LANE (0x0000000c) -#define I2C_CNTRL2_MULTIBYTE (0x00000010) -#define I2C_CNTRL2_START (0x00000100) -#define I2C_CNTRL2_WR_STATUS (0x00010000) -#define I2C_CNTRL2_RD_STATUS (0x00020000) -#define I2C_CNTRL2_I2C_TO_ERR (0x04000000) -#define I2C_CNTRL2_I2C_CFGERR (0x08000000) -#define I2C_CNTRL2_I2C_CMPLT (0x10000000) +#define I2C_CNTRL2_SIZE (0x00000003) +#define I2C_CNTRL2_LANE (0x0000000c) +#define I2C_CNTRL2_MULTIBYTE (0x00000010) +#define I2C_CNTRL2_START (0x00000100) +#define I2C_CNTRL2_WR_STATUS (0x00010000) +#define I2C_CNTRL2_RD_STATUS (0x00020000) +#define I2C_CNTRL2_I2C_TO_ERR (0x04000000) +#define I2C_CNTRL2_I2C_CFGERR (0x08000000) +#define I2C_CNTRL2_I2C_CMPLT (0x10000000) /* I2C_CNTRL2 : Read/Write Bit Mask Definition */ -#define I2C_CNTRL2_RWMASK (0x0000011f) +#define I2C_CNTRL2_RWMASK (0x0000011f) /* I2C_CNTRL2 : Unused/Reserved bits Definition */ -#define I2C_CNTRL2_RESERVED (0xe3fcfee0) +#define I2C_CNTRL2_RESERVED (0xe3fcfee0) /* I2C_RD_DATA : Reset Value */ -#define I2C_RD_DATA_RESET_VALUE (0x00000000) +#define I2C_RD_DATA_RESET_VALUE (0x00000000) /* I2C_RD_DATA : Register Bits Masks Definitions */ -#define I2C_RD_DATA_RBYTE0 (0x000000ff) -#define I2C_RD_DATA_RBYTE1 (0x0000ff00) -#define I2C_RD_DATA_RBYTE2 (0x00ff0000) -#define I2C_RD_DATA_RBYTE3 (0xff000000) +#define I2C_RD_DATA_RBYTE0 (0x000000ff) +#define I2C_RD_DATA_RBYTE1 (0x0000ff00) +#define I2C_RD_DATA_RBYTE2 (0x00ff0000) +#define I2C_RD_DATA_RBYTE3 (0xff000000) /* I2C_RD_DATA : Read/Write Bit Mask Definition */ -#define I2C_RD_DATA_RWMASK (0x00000000) +#define I2C_RD_DATA_RWMASK (0x00000000) /* I2C_RD_DATA : Unused/Reserved bits Definition */ -#define I2C_RD_DATA_RESERVED (0x00000000) +#define I2C_RD_DATA_RESERVED (0x00000000) /* I2C_TX_DATA : Reset Value */ -#define I2C_TX_DATA_RESET_VALUE (0x00000000) +#define I2C_TX_DATA_RESET_VALUE (0x00000000) /* I2C_TX_DATA : Register Bits Masks Definitions */ -#define I2C_TX_DATA_TBYTE0 (0x000000ff) -#define I2C_TX_DATA_TBYTE1 (0x0000ff00) -#define I2C_TX_DATA_TBYTE2 (0x00ff0000) -#define I2C_TX_DATA_TBYTE3 (0xff000000) +#define I2C_TX_DATA_TBYTE0 (0x000000ff) +#define I2C_TX_DATA_TBYTE1 (0x0000ff00) +#define I2C_TX_DATA_TBYTE2 (0x00ff0000) +#define I2C_TX_DATA_TBYTE3 (0xff000000) /* I2C_TX_DATA : Read/Write Bit Mask Definition */ -#define I2C_TX_DATA_RWMASK (0xffffffff) +#define I2C_TX_DATA_RWMASK (0xffffffff) /* I2C_TX_DATA : Unused/Reserved bits Definition */ -#define I2C_TX_DATA_RESERVED (0x00000000) +#define I2C_TX_DATA_RESERVED (0x00000000) -#define TSI108_I2C_OFFSET 0x7000 /* register block offset for general use I2C channel */ -#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* register block offset for SPD I2C channel */ +#define TSI108_I2C_OFFSET 0x7000 /* offset for general use I2C channel */ +#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* offset for SPD I2C channel */ -#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */ +#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */ /* I2C status codes */ -#define TSI108_I2C_SUCCESS 0 -#define TSI108_I2C_PARAM_ERR 1 -#define TSI108_I2C_TIMEOUT_ERR 2 -#define TSI108_I2C_IF_BUSY 3 -#define TSI108_I2C_IF_ERROR 4 +#define TSI108_I2C_SUCCESS 0 +#define TSI108_I2C_PARAM_ERR 1 +#define TSI108_I2C_TIMEOUT_ERR 2 +#define TSI108_I2C_IF_BUSY 3 +#define TSI108_I2C_IF_ERROR 4 #endif /* _TSI108_H_ */ From c9c1eeed7dd193fa65fb194654132040d49d4d3a Mon Sep 17 00:00:00 2001 From: roy zang Date: Fri, 1 Dec 2006 19:01:25 +0800 Subject: [PATCH 68/72] Fix the exception occuring in RAM table search issue. The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang --- cpu/74xx_7xx/cpu.c | 16 ++++++---------- include/configs/mpc7448hpc2.h | 1 - lib_ppc/extable.c | 27 +++++++++++++++++---------- 3 files changed, 23 insertions(+), 21 deletions(-) diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index ca45ca0457..84d5da3116 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -108,11 +108,11 @@ get_cpu_type(void) case 0x8003: type = CPU_7447A; break; - + case 0x8004: type = CPU_7448; break; - + default: break; } @@ -164,6 +164,10 @@ int checkcpu (void) str = "MPC7410"; break; + case CPU_7447A: + str = "MPC7447A"; + break; + case CPU_7448: str = "MPC7448"; break; @@ -180,14 +184,6 @@ int checkcpu (void) str = "MPC7457"; break; - case CPU_7447A: - str = "MPC7447A"; - break; - - case CPU_7448: - str = "MPC7448"; - break; - default: printf("Unknown CPU -- PVR: 0x%08x\n", pvr); return -1; diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index b13b699b59..c9131a432c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -439,6 +439,5 @@ */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_EXCEPTION_AFTER_RELOCATE #define CFG_SERIAL_HANG_IN_EXCEPTION #endif /* __CONFIG_H */ diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index 34b5d460cf..623b5f129c 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -57,16 +57,22 @@ search_one_table(const struct exception_table_entry *first, long diff; mid = (last - first) / 2 + first; -#ifdef CFG_EXCEPTION_AFTER_RELOCATE - diff = (mid->insn + gd->reloc_off) - value; - if (diff == 0) - return (mid->fixup + gd->reloc_off); -#else - diff = mid->insn - value; - if (diff == 0) - return mid->fixup; -#endif - else if (diff < 0) + if (mid > CFG_MONITOR_BASE){ + /* exception occurs in FLASH, before u-boot relocation. + * No relocation offset is needed. + */ + diff = mid->insn - value; + if (diff == 0) + return mid->fixup; + } else { + /* exception occurs in RAM, after u-boot relocation. + * A relocation offset should be added. + */ + diff = (mid->insn + gd->reloc_off) - value; + if (diff == 0) + return (mid->fixup + gd->reloc_off); + } + if (diff < 0) first = mid+1; else last = mid-1; @@ -83,6 +89,7 @@ search_exception_table(unsigned long addr) /* There is only the kernel to search. */ ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr); + /* if the serial port does not hang in exception, printf can be used */ #if !defined(CFG_SERIAL_HANG_IN_EXCEPTION) if (ex_tab_message) printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); From 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf Mon Sep 17 00:00:00 2001 From: roy zang Date: Mon, 4 Dec 2006 14:33:08 +0800 Subject: [PATCH 69/72] Remove the duplicate memory test code for mpc744ihpc2 board. If a memory test is needed, please use the functions in post/memory.c or memtest command. Signed-off-by: Roy Zang --- board/mpc7448hpc2/mpc7448hpc2.c | 378 -------------------------------- include/configs/mpc7448hpc2.h | 22 -- 2 files changed, 400 deletions(-) diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c index 4d221e7a69..d4a047c1d6 100644 --- a/board/mpc7448hpc2/mpc7448hpc2.c +++ b/board/mpc7448hpc2/mpc7448hpc2.c @@ -89,384 +89,6 @@ long int initdram (int board_type) return dram_size (board_type); } -/* DRAM check routines copied from gw8260 */ - -#if defined (CFG_DRAM_TEST) - -/*********************************************************************/ -/* NAME: move64() - moves a double word (64-bit) */ -/* */ -/* DESCRIPTION: */ -/* this function performs a double word move from the data at */ -/* the source pointer to the location at the destination pointer. */ -/* */ -/* INPUTS: */ -/* unsigned long long *src - pointer to data to move */ -/* */ -/* OUTPUTS: */ -/* unsigned long long *dest - pointer to locate to move data */ -/* */ -/* RETURNS: */ -/* None */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* May cloober fr0. */ -/* */ -/*********************************************************************/ -static void move64 (unsigned long long *src, unsigned long long *dest) -{ - asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : :"fr0"); /* Clobbers fr0 */ - return; -} - -#if defined (CFG_DRAM_TEST_DATA) - -unsigned long long pattern[] = { - 0xaaaaaaaaaaaaaaaaULL, - 0xccccccccccccccccULL, - 0xf0f0f0f0f0f0f0f0ULL, - 0xff00ff00ff00ff00ULL, - 0xffff0000ffff0000ULL, - 0xffffffff00000000ULL, - 0x00000000ffffffffULL, - 0x0000ffff0000ffffULL, - 0x00ff00ff00ff00ffULL, - 0x0f0f0f0f0f0f0f0fULL, - 0x3333333333333333ULL, - 0x5555555555555555ULL -}; - -/*********************************************************************/ -/* NAME: mem_test_data() - test data lines for shorts and opens */ -/* */ -/* DESCRIPTION: */ -/* Tests data lines for shorts and opens by forcing adjacent data */ -/* to opposite states. Because the data lines could be routed in */ -/* an arbitrary manner the must ensure test patterns ensure that */ -/* every case is tested. By using the following series of binary */ -/* patterns every combination of adjacent bits is test regardless */ -/* of routing. */ -/* */ -/* ...101010101010101010101010 */ -/* ...110011001100110011001100 */ -/* ...111100001111000011110000 */ -/* ...111111110000000011111111 */ -/* */ -/* Carrying this out, gives us six hex patterns as follows: */ -/* */ -/* 0xaaaaaaaaaaaaaaaa */ -/* 0xcccccccccccccccc */ -/* 0xf0f0f0f0f0f0f0f0 */ -/* 0xff00ff00ff00ff00 */ -/* 0xffff0000ffff0000 */ -/* 0xffffffff00000000 */ -/* */ -/* The number test patterns will always be given by: */ -/* */ -/* log(base 2)(number data bits) = log2 (64) = 6 */ -/* */ -/* To test for short and opens to other signals on our boards. we */ -/* simply */ -/* test with the 1's complemnt of the paterns as well. */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* Assumes only one one SDRAM bank */ -/* */ -/*********************************************************************/ -int mem_test_data (void) -{ - unsigned long long *pmem = (unsigned long long *)CFG_MEMTEST_START; - unsigned long long temp64; - int num_patterns = sizeof (pattern) / sizeof (pattern[0]); - int i; - unsigned int hi, lo; - - for (i = 0; i < num_patterns; i++) { - move64 (&(pattern[i]), pmem); - move64 (pmem, &temp64); - - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf ("\ntemp64 = 0x%08x%08x", hi, lo); */ - - hi = (pattern[i] >> 32) & 0xffffffff; - lo = pattern[i] & 0xffffffff; - /* printf ("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ - - if (temp64 != pattern[i]) { - printf ("\n Data Test Failed, pattern 0x%08x%08x", - hi, lo); - return 1; - } - } - - return 0; -} -#endif /* CFG_DRAM_TEST_DATA */ - -#if defined (CFG_DRAM_TEST_ADDRESS) -/*********************************************************************/ -/* NAME: mem_test_address() - test address lines */ -/* */ -/* DESCRIPTION: */ -/* This function performs a test to verify that each word im */ -/* memory is uniquly addressable. The test sequence is as follows: */ -/* */ -/* 1) write the address of each word to each word. */ -/* 2) verify that each location equals its address */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern and address */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_test_address (void) -{ - volatile unsigned int *pmem = - (volatile unsigned int *)CFG_MEMTEST_START; - const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4; - unsigned int i; - - /* write address to each location */ - for (i = 0; i < size; i++) { - pmem[i] = i; - } - - /* verify each loaction */ - for (i = 0; i < size; i++) { - if (pmem[i] != i) { - printf ("\n Address Test Failed at 0x%x", i); - return 1; - } - } - return 0; -} -#endif /* CFG_DRAM_TEST_ADDRESS */ - -#if defined (CFG_DRAM_TEST_WALK) -/*********************************************************************/ -/* NAME: mem_march() - memory march */ -/* */ -/* DESCRIPTION: */ -/* Marches up through memory. At each location verifies rmask if */ -/* read = 1. At each location write wmask if write = 1. Displays */ -/* failing address and pattern. */ -/* */ -/* INPUTS: */ -/* volatile unsigned long long * base - start address of test */ -/* unsigned int size - number of dwords(64-bit) to test */ -/* unsigned long long rmask - read verify mask */ -/* unsigned long long wmask - wrtie verify mask */ -/* short read - verifies rmask if read = 1 */ -/* short write - writes wmask if write = 1 */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern and address */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_march (volatile unsigned long long *base, - unsigned int size, - unsigned long long rmask, - unsigned long long wmask, short read, short write) -{ - unsigned int i; - unsigned long long temp; - unsigned int hitemp, lotemp, himask, lomask; - - for (i = 0; i < size; i++) { - if (read != 0) { - /* temp = base[i]; */ - move64 ((unsigned long long *)&(base[i]), &temp); - if (rmask != temp) { - hitemp = (temp >> 32) & 0xffffffff; - lotemp = temp & 0xffffffff; - himask = (rmask >> 32) & 0xffffffff; - lomask = rmask & 0xffffffff; - - printf ("\n Walking one's test failed: \ - address = 0x%08x," "\n\texpected \ - 0x%08x%08x, found 0x%08x%08x", i << 3,\ - himask, lomask, hitemp, lotemp); - return 1; - } - } - if (write != 0) { - /* base[i] = wmask; */ - move64 (&wmask, (unsigned long long *)&(base[i])); - } - } - return 0; -} -#endif /* CFG_DRAM_TEST_WALK */ - -/*********************************************************************/ -/* NAME: mem_test_walk() - a simple walking ones test */ -/* */ -/* DESCRIPTION: */ -/* Performs a walking ones through entire physical memory. The */ -/* test uses as series of memory marches, mem_march(), to verify */ -/* and write the test patterns to memory. The test sequence is as */ -/* follows: */ -/* 1) march writing 0000...0001 */ -/* 2) march verifying 0000...0001 , writing 0000...0010 */ -/* 3) repeat step 2 shifting masks left 1 bit each time unitl */ -/* the write mask equals 1000...0000 */ -/* 4) march verifying 1000...0000 */ -/* The test fails if any of the memory marches return a failure. */ -/* */ -/* OUTPUTS: */ -/* Displays which pass on the memory test is executing */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_test_walk (void) -{ - unsigned long long mask; - volatile unsigned long long *pmem = - (volatile unsigned long long *)CFG_MEMTEST_START; - const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8; - - unsigned int i; - - mask = 0x01; - - printf ("Initial Pass"); - mem_march (pmem, size, 0x0, 0x1, 0, 1); - - printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); - printf (" "); - printf (" "); - printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); - - for (i = 0; i < 63; i++) { - printf ("Pass %2d", i + 2); - if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) - /*printf ("mask: 0x%x, pass: %d, ", mask, i); */ - return 1; - mask = mask << 1; - printf ("\b\b\b\b\b\b\b"); - } - - printf ("Last Pass"); - if (mem_march(pmem, size, 0, mask, 0, 1) != 0) { - /* printf ("mask: 0x%x", mask); */ - return 1; - } - printf ("\b\b\b\b\b\b\b\b\b"); - printf (" "); - printf ("\b\b\b\b\b\b\b\b\b"); - - return 0; -} - -/*********************************************************************/ -/* NAME: testdram() - calls any enabled memory tests */ -/* */ -/* DESCRIPTION: */ -/* Runs memory tests if the environment test variables are set to */ -/* 'y'. */ -/* */ -/* INPUTS: */ -/* testdramdata - If set to 'y', data test is run. */ -/* testdramaddress - If set to 'y', address test is run. */ -/* testdramwalk - If set to 'y', walking ones test is run */ -/* */ -/* OUTPUTS: */ -/* None */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int testdram (void) -{ - char *s; - int rundata, runaddress, runwalk; - - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; - -/* rundata = 1; */ -/* runaddress = 0; */ -/* runwalk = 0; */ - - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) - printf ("Testing RAM from 0x%08x to 0x%08x ... \ - (don't panic... that will take a moment !!!!)\n", \ - CFG_MEMTEST_START, CFG_MEMTEST_END); -#ifdef CFG_DRAM_TEST_DATA - if (rundata == 1) { - printf ("Test DATA ... "); - if (mem_test_data () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif -#ifdef CFG_DRAM_TEST_ADDRESS - if (runaddress == 1) { - printf ("Test ADDRESS ... "); - if (mem_test_address () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif -#ifdef CFG_DRAM_TEST_WALK - if (runwalk == 1) { - printf ("Test WALKING ONEs ... "); - if (mem_test_walk () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) - printf ("passed\n"); - return 0; - -} -#endif /* CFG_DRAM_TEST */ - #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup (void *blob, bd_t *bd) diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index c9131a432c..38c382cf7c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -203,30 +203,8 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -/* -#define CFG_DRAM_TEST - * DRAM tests - * CFG_DRAM_TEST - enables the following tests. - * - * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word - * is uniquely addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. - */ -#undef CFG_DRAM_TEST #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ #define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#if defined(CFG_DRAM_TEST) -#define CFG_DRAM_TEST_DATA -#define CFG_DRAM_TEST_ADDRESS -#define CFG_DRAM_TEST_WALK -#endif /* CFG_DRAM_TEST */ #define CFG_LOAD_ADDR 0x00400000 /* default load address */ From 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 Mon Sep 17 00:00:00 2001 From: roy zang Date: Mon, 4 Dec 2006 14:46:23 +0800 Subject: [PATCH 70/72] Remove the static MAC address, ip address, server ip, netmask and gateway ip for network setting. Signed-off-by: Roy Zang --- include/configs/mpc7448hpc2.h | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 38c382cf7c..6bad515477 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -3,7 +3,7 @@ * * (C) Copyright 2006 * Alex Bounine , Tundra Semiconductor Corp. - * Roy Zang , Freescale Corp. + * Roy Zang , Freescale Corp. * * See file CREDITS for list of people who contributed to this * project. @@ -60,12 +60,7 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R -/* Default MAC Addresses for on-chip GIGE Controller */ - -#define CONFIG_ETHADDR 00:06:D2:00:00:01 - #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:06:D2:00:00:02 #define CONFIG_ENV_OVERWRITE @@ -141,11 +136,6 @@ #define CONFIG_NET_MULTI -#define CONFIG_IPADDR 172.27.234.48 -#define CONFIG_SERVERIP 172.27.234.10 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_GATEWAYIP 172.27.255.254 - #define CONFIG_BOOTFILE zImage.initrd.elf #define CONFIG_LOADADDR 0x400000 From 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 Mon Sep 17 00:00:00 2001 From: roy zang Date: Mon, 4 Dec 2006 17:54:21 +0800 Subject: [PATCH 71/72] Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original multiplier table can not refect the real PLL clock behavior of these processors. Please refer to the hardware specification for detailed information of the corresponding processors. Signed-off-by: Roy Zang --- cpu/74xx_7xx/speed.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c index af4aca5c34..d8c40cea01 100644 --- a/cpu/74xx_7xx/speed.c +++ b/cpu/74xx_7xx/speed.c @@ -52,7 +52,8 @@ static const int hid1_multipliers_x_10[] = { 0 /* 1111 - off */ }; -static const int hid1_7447A_multipliers_x_10[] = { +/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */ +static const int hid1_74xx_multipliers_x_10[] = { 115, /* 00000 - 11.5x */ 170, /* 00001 - 17x */ 75, /* 00010 - 7.5x */ @@ -66,7 +67,7 @@ static const int hid1_7447A_multipliers_x_10[] = { 65, /* 01010 - 6.5x */ 130, /* 01011 - 13x */ 85, /* 01100 - 8.5x */ - 240, /* 01101 - 13x */ + 240, /* 01101 - 24x */ 95, /* 01110 - 9.5x */ 90, /* 01111 - 9x */ 30, /* 10000 - 3x */ @@ -126,29 +127,24 @@ int get_clocks (void) { ulong clock = 0; -#ifdef CFG_CONFIG_BUS_CLK - gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */ -#else +#ifdef CFG_BUS_CLK gd->bus_clk = CFG_BUS_CLK; /* bus clock is a fixed frequency */ +#else + gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */ #endif /* calculate the clock frequency based upon the CPU type */ switch (get_cpu_type()) { case CPU_7447A: case CPU_7448: - clock = (gd->bus_clk / 10) * - hid1_7447A_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; - break; - case CPU_7455: case CPU_7457: /* - * It is assumed that the PLL_EXT line is zero. * Make sure division is done before multiplication to prevent 32-bit * arithmetic overflows which will cause a negative number */ clock = (gd->bus_clk / 10) * - hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF]; + hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; break; case CPU_750GX: From 9d27b3a0685ff99fc477983f315c04d49f657a8a Mon Sep 17 00:00:00 2001 From: roy zang Date: Mon, 4 Dec 2006 17:56:59 +0800 Subject: [PATCH 72/72] Slight code clean up. Add comments, delete duplicate define and remove spaces. Signed-off-by: Roy Zang --- board/mpc7448hpc2/tsi108_init.c | 4 ++-- include/74xx_7xx.h | 3 +-- lib_ppc/extable.c | 10 +++++----- 3 files changed, 8 insertions(+), 9 deletions(-) diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c index fdb53653d1..e3b09cfad3 100644 --- a/board/mpc7448hpc2/tsi108_init.c +++ b/board/mpc7448hpc2/tsi108_init.c @@ -147,7 +147,7 @@ int board_early_init_f (void) gd->mem_clk = 0; i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); - i = (i >> 20) & 0x07; /* value of SW4[4:7] */ + i = (i >> 20) & 0x07; /* Get GD PLL multiplier */ switch (i) { case 0: /* external clock */ printf ("Using external clock\n"); @@ -229,7 +229,7 @@ int board_early_init_r (void) __asm__ __volatile__ ("sync"); - /* Base addresses for Cs0, CS1, CS2, CS3 */ + /* Base addresses for CS0, CS1, CS2, CS3 */ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, 0x00000000); diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h index 8eccac8d59..ba73bae9e5 100644 --- a/include/74xx_7xx.h +++ b/include/74xx_7xx.h @@ -111,9 +111,8 @@ typedef enum __cpu_t { CPU_750CX, CPU_750FX, CPU_750GX, CPU_7400, CPU_7410, - CPU_7448, - CPU_7450, CPU_7455, CPU_7457, CPU_7447A, CPU_7448, + CPU_7450, CPU_7455, CPU_7457, CPU_UNKNOWN} cpu_t; extern cpu_t get_cpu_type(void); diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index 623b5f129c..fe856ffbb5 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -37,6 +37,8 @@ * on our cache or tlb entries. */ +DECLARE_GLOBAL_DATA_PTR; + struct exception_table_entry { unsigned long insn, fixup; @@ -50,22 +52,20 @@ search_one_table(const struct exception_table_entry *first, const struct exception_table_entry *last, unsigned long value) { - DECLARE_GLOBAL_DATA_PTR; - while (first <= last) { const struct exception_table_entry *mid; long diff; mid = (last - first) / 2 + first; - if (mid > CFG_MONITOR_BASE){ + if (mid > CFG_MONITOR_BASE) { /* exception occurs in FLASH, before u-boot relocation. - * No relocation offset is needed. + * No relocation offset is needed. */ diff = mid->insn - value; if (diff == 0) return mid->fixup; } else { - /* exception occurs in RAM, after u-boot relocation. + /* exception occurs in RAM, after u-boot relocation. * A relocation offset should be added. */ diff = (mid->insn + gd->reloc_off) - value;