Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 07:31:15 +00:00
Code Issues Projects Releases Packages Wiki Activity

arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model

Browse source 
The Pogoplug E02 board has the network chip Marvell 88E1116R. Convert
to Driver Model and use uclass mvgbe and the compatible driver M88E1118R
to bring up Ethernet.

- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- As the result of the migration to Driver Model, this u-boot image has
grown substantially (about 100K, give or take). The old envs location
at 0x60000 (384k) is no longer possible. Move it to 0xC0000 (768K).
- Miscellaneous changes: Move constants to .c file and remove header file
board/cloudengines/pogo_e02/pogo_e02.h, use CONFIG_SYS_THUMB_BUILD to
keep u-boot image under 512K, use BIT macro, and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Tony Dinh 2022-02-08 18:56:22 -08:00 committed by Stefan Roese
parent 9e6d71d2b5
commit d2a44ceddc
4 changed files with 22 additions and 77 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

51
board/cloudengines/pogo_e02/pogo_e02.c
View file

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
* Copyright (C) 2012
* David Purdy <david.c.purdy@gmail.com>
*
@ -12,16 +13,21 @@
#include <common.h>
#include <init.h>
#include <log.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <asm/global_data.h>
#include "pogo_e02.h"
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
/* GPIO configuration */
#define POGO_E02_OE_LOW (~(0))
#define POGO_E02_OE_HIGH (~(0))
#define POGO_E02_OE_VAL_LOW BIT(29)
#define POGO_E02_OE_VAL_HIGH 0
int board_early_init_f(void)
{
/*
@ -64,6 +70,11 @@ int board_early_init_f(void)
return 0;
}
int board_eth_init(struct bd_info *bis)
{
return cpu_eth_init(bis);
}
int board_init(void)
{
/* Boot parameters address */
@ -71,37 +82,3 @@ int board_init(void)
return 0;
}
#ifdef CONFIG_RESET_PHY_R
/* Configure and initialize PHY */
void reset_phy(void)
{
u16 reg;
u16 devadr;
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
/* command to read PHY dev address */
if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
printf("Err..(%s) could not read PHY dev address\n", __func__);
return;
}
/*
* Enable RGMII delay on Tx and Rx for CPU port
* Ref: sec 4.7.2 of chip datasheet
*/
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
/* reset the phy */
miiphy_reset(name, devadr);
debug("88E1116 Initialized on %s\n", name);
}
#endif /* CONFIG_RESET_PHY_R */

29
board/cloudengines/pogo_e02/pogo_e02.h
View file

@ -1,29 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012
* David Purdy <david.c.purdy@gmail.com>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#ifndef __POGO_E02_H
#define __POGO_E02_H
/* GPIO configuration */
#define POGO_E02_OE_LOW (~(0))
#define POGO_E02_OE_HIGH (~(0))
#define POGO_E02_OE_VAL_LOW (1 << 29)
#define POGO_E02_OE_VAL_HIGH 0
/* PHY related */
#define MV88E1116_LED_FCTRL_REG 10
#define MV88E1116_CPRSP_CR3_REG 21
#define MV88E1116_MAC_CTRL_REG 21
#define MV88E1116_PGADR_REG 22
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
#endif /* __POGO_E02_H */

6
configs/pogo_e02_defconfig
View file

@ -2,13 +2,14 @@ CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_SYS_KWD_CONFIG="board/cloudengines/pogo_e02/kwbimage.cfg"
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_POGO_E02=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_OFFSET=0xC0000
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02"
CONFIG_IDENT_STRING="\nPogo E02"
# CONFIG_SYS_MALLOC_F is not set
@ -36,11 +37,14 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_MARVELL=y
CONFIG_DM_ETH=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550=y

13
include/configs/pogo_e02.h
View file

@ -14,10 +14,6 @@
#include "mv-common.h"
/*
* Environment variables configurations
*/
/*
* Default environment variables
*/
@ -33,13 +29,10 @@
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* File system
*/
#ifdef CONFIG_RESET_PHY_R
#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */
#endif
#endif /* _CONFIG_POGO_E02_H */