sparc: leon3: Added memory controller initialization using new AMBA PnP routines.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
This commit is contained in:
Daniel Hellstrom 2010-01-25 09:56:08 +01:00 committed by Francois Retief
parent 3f33f6a28b
commit cff009ed6f
9 changed files with 685 additions and 40 deletions

View file

@ -7,4 +7,4 @@
extra-y = start.o
obj-y = cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \
interrupts.o prom.o usb_uhci.o
interrupts.o prom.o usb_uhci.o memcfg.o memcfg_low.o

View file

@ -0,0 +1,237 @@
/* GRLIB Memory controller setup. The register values are used
* from the associated low level assembler routine implemented
* in memcfg_low.S.
*
* (C) Copyright 2010, 2015
* Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <ambapp.h>
#include "memcfg.h"
#include <config.h>
#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
struct mctrl_setup esa_mctrl1_cfg = {
.reg_mask = 0x7,
.regs = {
{
.mask = 0x00000300,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3,
},
}
};
#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
struct mctrl_setup esa_mctrl2_cfg = {
.reg_mask = 0x7,
.regs = {
{
.mask = 0x00000300,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG1,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG2,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG3,
},
}
};
#endif
#endif
#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
struct mctrl_setup gaisler_ftmctrl1_cfg = {
.reg_mask = 0x7,
.regs = {
{
.mask = 0x00000300,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3,
},
}
};
#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
struct mctrl_setup gaisler_ftmctrl2_cfg = {
.reg_mask = 0x7,
.regs = {
{
.mask = 0x00000300,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG1,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG2,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG3,
},
}
};
#endif
#endif
#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
struct mctrl_setup gaisler_sdctrl1_cfg = {
.reg_mask = 0x1,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL1_CTRL,
},
}
};
#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
struct mctrl_setup gaisler_sdctrl2_cfg = {
.reg_mask = 0x1,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL2_CTRL,
},
}
};
#endif
#endif
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
struct ahbmctrl_setup gaisler_ddr2spa1_cfg = {
.ahb_mbar_no = 1,
.reg_mask = 0xd,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG1,
},
{ 0x00000000, 0},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG3,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG4,
},
}
};
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
struct ahbmctrl_setup gaisler_ddr2spa2_cfg = {
.ahb_mbar_no = 1,
.reg_mask = 0xd,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG1,
},
{ 0x00000000, 0},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG3,
},
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG4,
},
}
};
#endif
#endif
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
struct ahbmctrl_setup gaisler_ddrspa1_cfg = {
.ahb_mbar_no = 1,
.reg_mask = 0x1,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL,
},
}
};
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
struct ahbmctrl_setup gaisler_ddrspa2_cfg = {
.ahb_mbar_no = 1,
.reg_mask = 0x1,
.regs = {
{
.mask = 0x00000000,
.value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA2_CTRL,
},
}
};
#endif
#endif
struct grlib_mctrl_handler grlib_mctrl_handlers[] = {
/* ESA MCTRL (PROM/FLASH/IO/SRAM/SDRAM) */
#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
_nomem_mctrl_init, (void *)&esa_mctrl1_cfg},
#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
_nomem_mctrl_init, (void *)&esa_mctrl2_cfg},
#endif
#endif
/* GAISLER Fault Tolerant Memory controller (PROM/FLASH/IO/SRAM/SDRAM) */
#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
_nomem_mctrl_init, (void *)&gaisler_ftmctrl1_cfg},
#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
_nomem_mctrl_init, (void *)&gaisler_ftmctrl2_cfg},
#endif
#endif
/* GAISLER SDRAM-only Memory controller (SDRAM) */
#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
_nomem_mctrl_init, (void *)&gaisler_sdctrl1_cfg},
#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
_nomem_mctrl_init, (void *)&gaisler_sdctrl2_cfg},
#endif
#endif
/* GAISLER DDR Memory controller (DDR) */
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
{DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
_nomem_ahbmctrl_init, (void *)&gaisler_ddrspa1_cfg},
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
{DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
_nomem_ahbmctrl_init, (void *)&gaisler_ddrspa2_cfg},
#endif
#endif
/* GAISLER DDR2 Memory controller (DDR2) */
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
{DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
_nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa1_cfg},
#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
{DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
_nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa2_cfg},
#endif
#endif
/* Mark end */
MH_END
};

View file

@ -0,0 +1,90 @@
/* GRLIB Memory controller setup structures
*
* (C) Copyright 2010, 2015
* Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MEMCFG_H__
#define __MEMCFG_H__
/*********** Low Level Memory Controller Initalization ***********/
#ifndef __ASSEMBLER__
struct grlib_mctrl_handler;
typedef void (*mctrl_handler_t)(
struct grlib_mctrl_handler *dev,
void *conf,
unsigned int ioarea
);
/* Memory Controller Handler Structure */
struct grlib_mctrl_handler {
unsigned char type; /* 0x00. MASK: AHB MST&SLV, APB SLV */
char index; /* 0x01. Unit number, 0, 1, 2... */
char unused[2]; /* 0x02 */
unsigned int ven_dev; /* 0x04. Device and Vendor */
mctrl_handler_t func; /* 0x08. Memory Controller Handler */
void *priv; /* 0x0c. Optional private data, ptr to
* info how to set up controller */
};
extern struct grlib_mctrl_handler grlib_mctrl_handlers[];
#endif
#define MH_STRUCT_SIZE (4*4)
#define MH_TYPE 0x00
#define MH_INDEX 0x01
#define MH_VENDOR_DEVICE 0x04
#define MH_FUNC 0x08
#define MH_PRIV 0x0c
#define MH_TYPE_NONE DEV_NONE
#define MH_TYPE_AHB_MST DEV_AHB_MST
#define MH_TYPE_AHB_SLV DEV_AHB_SLV
#define MH_TYPE_APB_SLV DEV_APB_SLV
#define MH_UNUSED {0, 0}
#define MH_END {DEV_NONE, 0, MH_UNUSED, AMBA_PNP_ID(0, 0), 0, 0}
/*********** Low Level Memory Controller Initalization Handlers ***********/
#ifndef __ASSEMBLER__
extern void _nomem_mctrl_init(
struct grlib_mctrl_handler *dev,
void *conf,
unsigned int ioarea_apbmst);
struct mctrl_setup {
unsigned int reg_mask; /* Which registers to write */
struct {
unsigned int mask; /* Mask used keep reg bits unchanged */
unsigned int value; /* Value written to register */
} regs[8];
};
extern void _nomem_ahbmctrl_init(
struct grlib_mctrl_handler *dev,
void *conf,
unsigned int ioarea_apbmst);
struct ahbmctrl_setup {
int ahb_mbar_no; /* MBAR to get register address from */
unsigned int reg_mask; /* Which registers to write */
struct {
unsigned int mask; /* Mask used keep reg bits unchanged */
unsigned int value; /* Value written to register */
} regs[8];
};
#endif
/* mctrl_setup data structure defines */
#define NREGS_OFS 0
#define REGS_OFS 0x4
#define REGS_SIZE 8
#endif

View file

@ -0,0 +1,253 @@
/* This is the memory initialization functions, the function
* implemented below initializes each memory controller
* found and specified by the input grlib_mctrl_handler structure.
*
* After the memory controllers have been initialized the stack
* can be used.
*
* (C) Copyright 2010, 2015
* Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <ambapp.h>
#include "memcfg.h"
#include <config.h>
.seg "text"
.globl _nomem_memory_ctrl_init
.globl _nomem_mctrl_init, _nomem_ahbmctrl_init
.extern _nomem_find_apb
.extern _nomem_find_ahb
/* FUNCTION
* _nomem_memory_controller_init(struct grlib_mctrl_handler *mem_handlers)
*
* Initialize AMBA devices, _nomem_amba_init() has prepared i0-i5
* with the AHB buses on the system.
*
* For each entry in mem_handlers find the VENDOR:DEVICE and handle it
* by calling the handler function pointer.
*
* Constraints:
* i6, i7, o6, l7, l6, g3, g4, g5, g6, g7 is used by caller
* o7 is return address
* l5 reserved for this function for future use.
*
* Arguments
* - o0 Pointer to memory handler array
*
* Results
* - o0 Number of memory controllers found
*
* Clobbered
* - o0 (Current AHB slave conf address)
* - l0 (mem handler entry address)
* - l1 (Return value, number of memory controllers found)
* - o7 (function pointer)
* - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
* - o0, o1, o2, o3, o4, o5 (Used as arguments)
*
* - g1 ( level 1 return address)
* - g2 ( level 2 return address)
*/
_nomem_memory_ctrl_init:
/* At this point all AHB buses has been found and the I/O Areas of
* all AHB buses is stored in the i0-i5 registers. Max 6 buses. Next,
* memory controllers are found by searching all buses for matching
* VENDOR:DEVICE. The VENDOR:DEVICE to search for are taken from the
* mem_handlers array. For each match the function pointer stored in
* the mem_handler entry is called to handle the hardware setup.
*/
mov %o7, %g1 /* Save return address */
mov %o0, %l0
mov %g0, %l1 /* The return value */
.L_do_one_mem_handler:
ld [%l0 + MH_FUNC], %o7
cmp %o7, %g0
be .L_all_mctrl_handled
nop
/*** Scan for memory controller ***/
/* Set up argments, o5 not used by _nomem_find_apb */
ldub [%l0 + MH_TYPE], %o5
clr %o4
clr %o3
ldub [%l0 + MH_INDEX], %o2
ld [%l0 + MH_VENDOR_DEVICE], %o1
/* An empty config? */
cmp %o5, DEV_NONE
beq .L_all_mctrl_next
/* Select function (APB or AHB) */
cmp %o5, DEV_APB_SLV
bne .L_find_ahb_memctrl
clr %o0
.L_find_apb_memctrl:
call _nomem_find_apb /* Scan for APB slave device */
nop
/* o3 = iobar address
* o4 = AHB Bus index
*
* REG ADR = ((iobar >> 12) & (iobar << 4) & 0xfff00) | "APB Base"
*/
ld [%o3 + AMBA_APB_IOBAR_OFS], %o5
srl %o5, 12, %o2
sll %o5, 4, %o5
and %o2, %o5, %o5
set 0xfff00, %o2
and %o2, %o5, %o5
sethi %hi(0xfff00000), %o2
and %o3, %o2, %o2
or %o5, %o2, %o5 /* Register base address */
ba .L_call_one_mem_handler
nop
.L_find_ahb_memctrl:
call _nomem_find_ahb /* Scan for AHB Slave or Master.
* o5 determine type. */
nop
clr %o5
/* Call the handler function if the hardware was found
*
* o0 = mem_handler
* o1 = Configuration address
* o2 = AHB Bus index
* o3 = APB Base register (if APB Slave)
*
* Constraints:
* i0-i7, l0, l1, l5, g1, g3-g7 may no be used.
*/
.L_call_one_mem_handler:
cmp %o0, %g0
be .L_all_mctrl_next
mov %l0, %o0 /* Mem handler pointer */
mov %o3, %o1 /* AMBA PnP Configuration address */
mov %o4, %o2 /* AHB Bus index */
ld [%l0 + MH_FUNC], %o7 /* Get Function pointer */
call %o7
mov %o5, %o3 /* APB Register Base Address */
inc %l1 /* Number of Memory controllers
* handled. */
/* Do next entry in mem_handlers */
.L_all_mctrl_next:
ba .L_do_one_mem_handler
add %l0, MH_STRUCT_SIZE, %l0
.L_all_mctrl_handled:
mov %g1, %o7 /* Restore return address */
retl
mov %l1, %o0
/* Generic Memory controller initialization routine (APB Registers)
*
* o0 = mem_handler structure pointer
* o1 = Configuration address
* o2 = AHB Bus index
* o3 = APB Base register
*
* Clobbered
* o0-o4
*/
_nomem_mctrl_init:
ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
ld [%o0], %o1 /* Get Reg Mask */
and %o1, 0xff, %o1
add %o0, REGS_OFS, %o0 /* Point to first reg */
.L_do_one_reg:
andcc %o1, 0x1, %g0
beq .L_do_next_reg
ld [%o0], %o2
ld [%o3], %o4
and %o4, %o2, %o4
ld [%o0 + 4], %o2
or %o4, %o2, %o4
st %o4, [%o3]
.L_do_next_reg:
add %o0, REGS_SIZE, %o0
add %o3, 4, %o3
srl %o1, 1, %o1
cmp %o1, 0
bne .L_do_one_reg
nop
/* No more registers to write */
retl
nop
/* Generic Memory controller initialization routine (AHB Registers)
*
* o0 = mem_handler structure pointer
* o1 = Configuration address of memory controller
* o2 = AHB Bus index
*
* Clobbered
* o0-o5
*/
_nomem_ahbmctrl_init:
ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
/* Get index of AHB MBAR to get registers from */
ld [%o0], %o5
add %o0, 4, %o0
/* Get Address of MBAR in PnP info */
add %o5, 4, %o5
sll %o5, 2, %o5
add %o5, %o1, %o5 /* Address of MBAR */
/* Get Address of registers from PnP information
* Address is in AHB I/O format, i.e. relative to bus
*
* ADR = (iobar & (iobar << 16) & 0xfff00000)
* IOADR = (ADR >> 12) | "APB Base"
*/
ld [%o5], %o5
sll %o5, 16, %o4
and %o5, %o4, %o5
sethi %hi(0xfff00000), %o4
and %o5, %o4, %o5 /* ADR */
and %o4, %o1, %o4
srl %o5, 12, %o5
or %o5, %o4, %o3 /* IOADR in o3 */
ld [%o0], %o1 /* Get Reg Mask */
and %o1, 0xff, %o1
add %o0, REGS_OFS, %o0 /* Point to first reg */
.L_do_one_ahbreg:
andcc %o1, 0x1, %g0
beq .L_do_next_reg
ld [%o0], %o2
ld [%o3], %o4
and %o4, %o2, %o4
ld [%o0 + 4], %o2
or %o4, %o2, %o4
st %o4, [%o3]
.L_do_next_ahbreg:
add %o0, REGS_SIZE, %o0
add %o3, 4, %o3
srl %o1, 1, %o1
cmp %o1, 0
bne .L_do_one_reg
nop
/* No more registers to write */
retl
nop

View file

@ -13,6 +13,12 @@
#include <asm/stack.h>
#include <asm/leon.h>
#include <version.h>
#include <ambapp.h>
/* Default Plug&Play I/O area */
#ifndef CONFIG_AMBAPP_IOAREA
#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
#endif
/* Entry for traps which jump to a programmer-specified trap handler. */
#define TRAPR(H) \
@ -208,6 +214,7 @@ version_string:
.ascii U_BOOT_VERSION_STRING, "\0"
.section ".text"
.extern _nomem_amba_init, _nomem_memory_ctrl_init
.align 4
_hardreset:
@ -259,6 +266,38 @@ stackp:
andn %fp, 0x0f, %fp
sub %fp, 64, %sp
/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */
SPARC_PIC_THUNK_CALL(l7)
/* Scan AMBA Bus for AMBA buses using PnP information. All found
* AMBA buses I/O area will be located in i0-i5 upon return.
* The i0-i5 registers are later used by _nomem_amba_init2
*/
ambainit:
call _nomem_amba_init
sethi %hi(CONFIG_AMBAPP_IOAREA), %o0
/* Scan AMBA Buses for memory controllers, then initialize the
* memory controllers. Note that before setting up the memory controller
* the stack can not be used.
*/
memory_ctrl_init:
SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0)
call _nomem_memory_ctrl_init
nop
/* The return valu indicate how many memory controllers where found and
* initialized, if no memory controller was initialized, we can not continue
* because from here on we expect memory to be working.
*/
cmp %o0, 0
memory_ctrl_init_failed:
beq memory_ctrl_init_failed
nop
/*** From now on the stack can be used. ***/
cpu_init_unreloc:
call cpu_init_f
nop
@ -269,7 +308,6 @@ cpu_init_unreloc:
/* un relocated end address of monitor */
#define DATA_END __init_end
SPARC_PIC_THUNK_CALL(l7)
reloc:
SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
@ -389,6 +427,7 @@ jump:
SPARC_LOAD_ADDRESS(board_init_f, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1

View file

@ -312,31 +312,36 @@
#define CONFIG_SYS_GRLIB_SDRAM 0
/* No SDRAM Configuration */
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
#else
#define CONFIG_SYS_GRLIB_MEMCFG2 0x82205260
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82205260
#endif
#define CONFIG_SYS_GRLIB_MEMCFG3 0x0809a000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x0809a000
#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
/* GRLIB FT-MCTRL configuration */
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
#else
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82205260
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82205260
#endif
#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x0809a000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x0809a000
/* no DDR controller */
#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"

View file

@ -289,21 +289,29 @@
#define CONFIG_SYS_GRLIB_SDRAM 0
/* No SDRAM Configuration */
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
#define CONFIG_SYS_GRLIB_MEMCFG2 0x00000000
#define CONFIG_SYS_GRLIB_MEMCFG3 0x00000000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x00000000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00000000
#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x00000000
#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00000000
/* GRLIB FT-MCTRL configuration */
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x00000000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00000000
#define CONFIG_SYS_GRLIB_DDR_CFG 0xa900830a
/* DDR controller */
#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL 0xa900830a
#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
/* no DDR2 Controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 EP2S60"

View file

@ -252,23 +252,28 @@
#define CONFIG_SYS_GRLIB_SDRAM 0
/* No SDRAM Configuration */
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
/* GRLIB FT-MCTRL configuration */
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
/* no DDR controller */
#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"

View file

@ -264,25 +264,33 @@
#define CONFIG_SYS_GRLIB_SDRAM 0
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
/* No SDRAM Configuration */
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
/* LEON2 MCTRL configuration */
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
#if CONFIG_GRSIM
/* GRSIM configuration */
#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
#else
/* TSIM configuration */
#define CONFIG_SYS_GRLIB_MEMCFG2 0x81805220
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x81805220
#endif
#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
/* GRLIB FT-MCTRL configuration */
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
/* no DDR controller */
#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"