board: rockchip: Add rk3588 evb

rk3588 evb1 v10 is a evalution board from Rockchip, it is a dev board for
rockchip and also a reference board for board vendors.

Hardware:
SoC: RK3588
DRAM: LPDDR4X 8GB
Debug: UART2 via USB
PCIe: 3x4 *1
SATA *2
HDMI out *2
HDMI IN *1
USB2.0 Host *2
USB3.0 Host *1
Type C *1
MIPI DSI panel

dts Sync from Linux v6.2.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
This commit is contained in:
Kever Yang 2023-03-02 15:12:57 +08:00
parent c3328c3ba8
commit cf8658cdac
11 changed files with 319 additions and 0 deletions

View file

@ -171,6 +171,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
dtb-$(CONFIG_ROCKCHIP_RK3588) += \
rk3588-edgeble-neu6a-io.dtb \
rk3588-evb1-v10.dtb \
rk3588-rock-5b.dtb
dtb-$(CONFIG_ROCKCHIP_RV1108) += \

View file

@ -0,0 +1,21 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
*/
#include "rk3588-u-boot.dtsi"
/ {
aliases {
mmc0 = &sdmmc;
mmc1 = &sdhci;
};
chosen {
u-boot,spl-boot-order = &sdhci;
};
};
&sdhci {
bootph-all;
};

View file

@ -0,0 +1,129 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3588.dtsi"
/ {
model = "Rockchip RK3588 EVB1 V10 Board";
compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc12v_dcin>;
pwms = <&pwm2 0 25000 0>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
};
&gmac0 {
clock_in_out = "output";
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii-rxid";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
pinctrl-names = "default";
rx_delay = <0x00>;
tx_delay = <0x43>;
status = "okay";
};
&i2c2 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
&mdio0 {
rgmii_phy: ethernet-phy@1 {
/* RTL8211F */
compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&rtl8211f_rst>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
};
};
&pinctrl {
rtl8211f {
rtl8211f_rst: rtl8211f-rst {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm2 {
status = "okay";
};
&sdhci {
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};

View file

@ -1,5 +1,11 @@
if ROCKCHIP_RK3588
config TARGET_EVB_RK3588
bool "Rockchip EVB1 v10"
select BOARD_LATE_INIT
help
RK3588 EVB is a evaluation board for Rockchp RK3588.
config TARGET_RK3588_NEU6
bool "Edgeble Neural Compute Module 6(Neu6) SoM"
select BOARD_LATE_INIT
@ -51,6 +57,7 @@ config SYS_MALLOC_F_LEN
default 0x80000
source board/edgeble/neural-compute-module-6/Kconfig
source board/rockchip/evb_rk3588/Kconfig
source board/radxa/rock5b-rk3588/Kconfig
endif

View file

@ -0,0 +1,15 @@
if TARGET_EVB_RK3588
config SYS_BOARD
default "evb_rk3588"
config SYS_VENDOR
default "rockchip"
config SYS_CONFIG_NAME
default "evb_rk3588"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif

View file

@ -0,0 +1,7 @@
EVB-RK3588
M: Kever Yang <kever.yang@rock-chips.com>
S: Maintained
F: board/rockchip/evb_rk3588
F: include/configs/evb_rk3588.h
F: configs/evb-rk3588_defconfig
F: arch/arm/dts/rk3588-evb-u-boot.dtsi

View file

@ -0,0 +1,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (c) 2023 Rockchip Electronics Co,. Ltd.
#
obj-y += evb-rk3588.o

View file

@ -0,0 +1,39 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2023 Rockchip Electronics Co,. Ltd.
*/
#include <fdtdec.h>
#include <fdt_support.h>
#ifdef CONFIG_OF_BOARD_SETUP
static int rk3588_add_reserved_memory_fdt_nodes(void *new_blob)
{
struct fdt_memory gap1 = {
.start = 0x3fc000000,
.end = 0x3fc4fffff,
};
struct fdt_memory gap2 = {
.start = 0x3fff00000,
.end = 0x3ffffffff,
};
unsigned long flags = FDTDEC_RESERVED_MEMORY_NO_MAP;
unsigned int ret;
/*
* Inject the reserved-memory nodes into the DTS
*/
ret = fdtdec_add_reserved_memory(new_blob, "gap1", &gap1, NULL, 0,
NULL, flags);
if (ret)
return ret;
return fdtdec_add_reserved_memory(new_blob, "gap2", &gap2, NULL, 0,
NULL, flags);
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
return rk3588_add_reserved_memory_fdt_nodes(blob);
}
#endif

View file

@ -0,0 +1,69 @@
CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
CONFIG_DEFAULT_DEVICE_TREE="rk3588-evb1-v10"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_RK3588=y
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_TARGET_EVB_RK3588=y
CONFIG_SPL_STACK=0x400000
CONFIG_DEBUG_UART_BASE=0xFEB50000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-evb1-v10.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_ATF=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_REGULATOR_PWM=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_SYSRESET=y
CONFIG_ERRNO_STR=y

View file

@ -91,6 +91,7 @@ List of mainline supported Rockchip boards:
- Rockchip Evb-RK3568 (evb-rk3568)
* rk3588
- Rockchip EVB (evb-rk3588)
- Edgeble Neural Compute Module 6 SoM - Neu6a (neu6a-io-rk3588)
- Radxa ROCK 5B (rock5b-rk3588)
@ -185,6 +186,15 @@ To build rk3568 boards:
make evb-rk3568_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3588 boards:
.. code-block:: bash
export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.33.elf
export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
make evb-rk3588_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
Flashing
--------

View file

@ -0,0 +1,15 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
*/
#ifndef __EVB_RK3588_H
#define __EVB_RK3588_H
#include <configs/rk3588_common.h>
#define ROCKCHIP_DEVICE_SETTINGS \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
#endif