board: rockchip: Add rk3588 evb

rk3588 evb1 v10 is a evalution board from Rockchip, it is a dev board for
rockchip and also a reference board for board vendors.

Hardware:
SoC: RK3588
DRAM: LPDDR4X 8GB
Debug: UART2 via USB
PCIe: 3x4 *1
SATA *2
HDMI out *2
HDMI IN *1
USB2.0 Host *2
USB3.0 Host *1
Type C *1
MIPI DSI panel

dts Sync from Linux v6.2.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>

arch/arm/dts/Makefile

@@ -171,6 +171,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
 
 dtb-$(CONFIG_ROCKCHIP_RK3588) += \
 	rk3588-edgeble-neu6a-io.dtb \
+	rk3588-evb1-v10.dtb \
 	rk3588-rock-5b.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RV1108) += \

arch/arm/dts/rk3588-evb1-v10-u-boot.dtsi

@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		u-boot,spl-boot-order = &sdhci;
+	};
+};
+
+&sdhci {
+	bootph-all;
+};

arch/arm/dts/rk3588-evb1-v10.dts

@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB1 V10 Board";
+	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};

arch/arm/mach-rockchip/rk3588/Kconfig

@@ -1,5 +1,11 @@
 if ROCKCHIP_RK3588
 
+config TARGET_EVB_RK3588
+	bool "Rockchip EVB1 v10"
+	select BOARD_LATE_INIT
+	help
+	  RK3588 EVB is a evaluation board for Rockchp RK3588.
+
 config TARGET_RK3588_NEU6
 	bool "Edgeble Neural Compute Module 6(Neu6) SoM"
 	select BOARD_LATE_INIT
@@ -51,6 +57,7 @@ config SYS_MALLOC_F_LEN
 	default 0x80000
 
 source board/edgeble/neural-compute-module-6/Kconfig
+source board/rockchip/evb_rk3588/Kconfig
 source board/radxa/rock5b-rk3588/Kconfig
 
 endif

board/rockchip/evb_rk3588/Kconfig

@@ -0,0 +1,15 @@
+if TARGET_EVB_RK3588
+
+config SYS_BOARD
+	default "evb_rk3588"
+
+config SYS_VENDOR
+	default "rockchip"
+
+config SYS_CONFIG_NAME
+	default "evb_rk3588"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif

board/rockchip/evb_rk3588/MAINTAINERS

@@ -0,0 +1,7 @@
+EVB-RK3588
+M:	Kever Yang <kever.yang@rock-chips.com>
+S:	Maintained
+F:	board/rockchip/evb_rk3588
+F:	include/configs/evb_rk3588.h
+F:	configs/evb-rk3588_defconfig
+F:	arch/arm/dts/rk3588-evb-u-boot.dtsi

board/rockchip/evb_rk3588/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier:     GPL-2.0+
+#
+# Copyright (c) 2023 Rockchip Electronics Co,. Ltd.
+#
+
+obj-y += evb-rk3588.o

board/rockchip/evb_rk3588/evb-rk3588.c

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co,. Ltd.
+ */
+
+#include <fdtdec.h>
+#include <fdt_support.h>
+
+#ifdef CONFIG_OF_BOARD_SETUP
+static int rk3588_add_reserved_memory_fdt_nodes(void *new_blob)
+{
+	struct fdt_memory gap1 = {
+		.start = 0x3fc000000,
+		.end = 0x3fc4fffff,
+	};
+	struct fdt_memory gap2 = {
+		.start = 0x3fff00000,
+		.end = 0x3ffffffff,
+	};
+	unsigned long flags = FDTDEC_RESERVED_MEMORY_NO_MAP;
+	unsigned int ret;
+
+	/*
+	 * Inject the reserved-memory nodes into the DTS
+	 */
+	ret = fdtdec_add_reserved_memory(new_blob, "gap1", &gap1,  NULL, 0,
+					 NULL, flags);
+	if (ret)
+		return ret;
+
+	return fdtdec_add_reserved_memory(new_blob, "gap2", &gap2,  NULL, 0,
+					  NULL, flags);
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	return rk3588_add_reserved_memory_fdt_nodes(blob);
+}
+#endif

configs/evb-rk3588_defconfig

@@ -0,0 +1,69 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
+CONFIG_DEFAULT_DEVICE_TREE="rk3588-evb1-v10"
+CONFIG_DM_RESET=y
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SPL_STACK=0x400000
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-evb1-v10.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x4000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYSRESET=y
+CONFIG_ERRNO_STR=y

doc/board/rockchip/rockchip.rst

@@ -91,6 +91,7 @@ List of mainline supported Rockchip boards:
      - Rockchip Evb-RK3568 (evb-rk3568)
 
 * rk3588
+     - Rockchip EVB (evb-rk3588)
      - Edgeble Neural Compute Module 6 SoM - Neu6a (neu6a-io-rk3588)
      - Radxa ROCK 5B (rock5b-rk3588)
 
@@ -185,6 +186,15 @@ To build rk3568 boards:
         make evb-rk3568_defconfig
         make CROSS_COMPILE=aarch64-linux-gnu-
 
+To build rk3588 boards:
+
+.. code-block:: bash
+
+        export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.33.elf
+        export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
+        make evb-rk3588_defconfig
+        make CROSS_COMPILE=aarch64-linux-gnu-
+
 Flashing
 --------
 

include/configs/evb_rk3588.h

@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef __EVB_RK3588_H
+#define __EVB_RK3588_H
+
+#include <configs/rk3588_common.h>
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
+#endif