From c661c059b9a507baa1704c03f29ff2f79bae2ce2 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 8 May 2019 11:11:51 +0530 Subject: [PATCH] doc: rockchip: Add global doc for rk3399 build/flash Since rockchip have an individual doc/README.rockchip, it would be better to update the same instead of maintaining it separately in board files. So, add the documentation for rk3399 - procedure to build for Rockchip miniloader and U-Boot SPL options - procedure to boot from SD for Rockchip miniloader and U-Boot SPL options - procedure to build ATF, PMU M0 firmware for puma boards - add boot logs of each option, so-that it would help for future boards porting Signed-off-by: Jagan Teki Reviewed-by: Philipp Tomsich Reviewed-by: Kever Yang --- doc/README.rockchip | 233 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 232 insertions(+), 1 deletion(-) diff --git a/doc/README.rockchip b/doc/README.rockchip index ec10ebbc26..ca4d6473b0 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -88,10 +88,92 @@ One RV3188 baord is supported: For example: +1. To build RK3288 board: + CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all -(or you can use another cross compiler if you prefer) + (or you can use another cross compiler if you prefer) +2. To build RK3399 board: + + Option 1: Package the image with Rockchip miniloader: + + - Compile U-Boot + + => cd /path/to/u-boot + => make nanopi-neo4-rk3399_defconfig + => make + => make u-boot.itb + + - Get the rkbin + + => git clone https://github.com/rockchip-linux/rkbin.git + + - Create trust.img + + => cd /path/to/rkbin + => ./tools/trust_merger RKTRUST/RK3399TRUST.ini + + - Create uboot.img + + => cd /path/to/rkbin + => ./tools/loaderimage --pack --uboot /path/to/u-boot/u-boot-dtb.bin uboot.img + + (Get trust.img and uboot.img) + + Option 2: Package the image with SPL: + + - We need the Python elftools.elf.elffile library for make_fit_atf.py to work + + => sudo apt-get install python-pyelftools + + - Export cross compiler path for aarch64 + + - Compile ATF + + For Puma board. + + => git clone git://git.theobroma-systems.com/arm-trusted-firmware.git + => cd arm-trusted-firmware + => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 + + (copy bl31.bin into U-Boot root dir) + => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin + + For rest of rk3399 boards. + + => git clone https://github.com/ARM-software/arm-trusted-firmware.git + => cd arm-trusted-firmware + + (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-) + => make realclean + => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 + + (copy bl31.elf into U-Boot root dir) + => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot + + - Compile PMU M0 firmware + + This is optional for most of the rk3399 boards and required only for Puma board. + + => git clone git://git.theobroma-systems.com/rk3399-cortex-m0.git + => cd rk3399-cortex-m0 + + (export cross compiler path for Cortex-M0 PMU) + => make CROSS_COMPILE=arm-cortex_m0-eabi- + + (copy rk3399m0.bin into U-Boot root dir) + => cp rk3399m0.bin /path/to/u-boot + + - Compile U-Boot + + => cd /path/to/u-boot + => make orangepi-rk3399_defconfig + => make + => make u-boot.itb + + (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get + spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL) Writing to the board with USB ============================= @@ -225,6 +307,153 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out truncate -s %2048 u-boot.bin cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out +Booting from an SD card on RK3399 +================================= + +To write an image that boots from an SD card (assumed to be /dev/sdc): + +Option 1: Package the image with Rockchip miniloader: + + - Create idbloader.img + + => cd /path/to/u-boot + => ./tools/mkimage -n rk3399 -T rksd -d /path/to/rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin idbloader.img + => cat /path/to/rkbin/bin/rk33/rk3399_miniloader_v1.19.bin >> idbloader.img + + - Write idbloader.img at 64 sector + + => sudo dd if=idbloader.img of=/dev/sdc seek=64 + + - Write trust.img at 24576 + + => sudo dd if=trust.img of=/dev/sdc seek=24576 + + - Write uboot.img at 16384 sector + + => sudo dd if=uboot.img of=/dev/sdc seek=16384 + => sync + +Put this SD (or micro-SD) card into your board and reset it. You should see +something like: + +DDR Version 1.20 20190314 +In +Channel 0: DDR3, 933MHz +Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB +no stride +ch 0 ddrconfig = 0x101, ddrsize = 0x20 +pmugrf_os_reg[2] = 0x10006281, stride = 0x17 +OUT +Boot1: 2019-03-14, version: 1.19 +CPUId = 0x0 +ChipType = 0x10, 239 +mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 +mmc: ERROR: Card did not respond to voltage select! +emmc reinit +mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 +mmc: ERROR: Card did not respond to voltage select! +emmc reinit +mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 +mmc: ERROR: Card did not respond to voltage select! +SdmmcInit=2 1 +mmc0:cmd5,20 +SdmmcInit=0 0 +BootCapSize=0 +UserCapSize=60543MB +FwPartOffset=2000 , 0 +StorageInit ok = 45266 +SecureMode = 0 +SecureInit read PBA: 0x4 +SecureInit read PBA: 0x404 +SecureInit read PBA: 0x804 +SecureInit read PBA: 0xc04 +SecureInit read PBA: 0x1004 +SecureInit read PBA: 0x1404 +SecureInit read PBA: 0x1804 +SecureInit read PBA: 0x1c04 +SecureInit ret = 0, SecureMode = 0 +atags_set_bootdev: ret:(0) +GPT 0x3380ec0 signature is wrong +recovery gpt... +GPT 0x3380ec0 signature is wrong +recovery gpt fail! +LoadTrust Addr:0x4000 +No find bl30.bin +Load uboot, ReadLba = 2000 +hdr 0000000003380880 + 0x0:0x88,0x41,0x3e,0x97,0xe6,0x61,0x54,0x23,0xe9,0x5a,0xd1,0x2b,0xdc,0x2f,0xf9,0x35, + +Load OK, addr=0x200000, size=0x9c9c0 +RunBL31 0x10000 +NOTICE: BL31: v1.3(debug):370ab80 +NOTICE: BL31: Built : 09:23:41, Mar 4 2019 +NOTICE: BL31: Rockchip release version: v1.1 +INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 +INFO: Using opteed sec cpu_context! +INFO: boot cpu mask: 0 +INFO: plat_rockchip_pmu_init(1181): pd status 3e +INFO: BL31: Initializing runtime services +INFO: BL31: Initializing BL32 +INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64) + +INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2 + +INF [0x0] TEE-CORE:init_teecore:83: teecore inits done +INFO: BL31: Preparing for EL3 exit to normal world +INFO: Entry point address = 0x200000 +INFO: SPSR = 0x3c9 + + +U-Boot 2019.04-rc4-00136-gfd121f9641-dirty (Apr 16 2019 - 14:02:47 +0530) + +Model: FriendlyARM NanoPi NEO4 +DRAM: 1022 MiB +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 +Loading Environment from MMC... *** Warning - bad CRC, using default environment + +In: serial@ff1a0000 +Out: serial@ff1a0000 +Err: serial@ff1a0000 +Model: FriendlyARM NanoPi NEO4 +Net: eth0: ethernet@fe300000 +Hit any key to stop autoboot: 0 +=> + +Option 2: Package the image with SPL: + + - Prefix rk3399 header to SPL image + + => cd /path/to/u-boot + => ./tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl-dtb.bin out + + - Write prefixed SPL at 64th sector + + => sudo dd if=out of=/dev/sdc seek=64 + + - Write U-Boot proper at 16384 sector + + => sudo dd if=u-boot.itb of=/dev/sdc seek=16384 + => sync + +Put this SD (or micro-SD) card into your board and reset it. You should see +something like: + +U-Boot SPL board init +Trying to boot from MMC1 + + +U-Boot 2019.01-00004-g14db5ee998 (Mar 11 2019 - 13:18:41 +0530) + +Model: Orange Pi RK3399 Board +DRAM: 2 GiB +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 +Loading Environment from MMC... OK +In: serial@ff1a0000 +Out: serial@ff1a0000 +Err: serial@ff1a0000 +Model: Orange Pi RK3399 Board +Net: eth0: ethernet@fe300000 +Hit any key to stop autoboot: 0 +=> Using fastboot on rk3288 ======================== @@ -385,5 +614,7 @@ There are some documents about partitions in the links below. http://rockchip.wikidot.com/partitions -- +Jagan Teki +27 Mar 2019 Simon Glass 24 June 2015