serial: Remove CONFIG_SERIAL_MULTI from config files

Remove any notion of CONFIG_SERIAL_MULTI from board config files.
Since CONFIG_SERIAL_MULTI is now enabled by default, it is useless
to specify this config option in the board config files. Therefore
remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Marek Vasut 2012-09-14 23:39:52 +02:00 committed by Tom Rini
parent 82dda962f0
commit bffe31c144
43 changed files with 0 additions and 53 deletions

View file

@ -93,7 +93,6 @@
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

View file

@ -96,7 +96,6 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 9600
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -158,7 +158,6 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 9600
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -274,7 +274,6 @@ extern unsigned long get_clock_freq(void);
/* Serial Port */
#define CONFIG_CONS_INDEX 1
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1

View file

@ -453,7 +453,6 @@ extern unsigned long get_sdram_size(void);
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif
#define CONFIG_SERIAL_MULTI /* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -343,7 +343,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif
#define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -201,7 +201,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
#define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -102,7 +102,6 @@
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

View file

@ -56,7 +56,6 @@
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* default console is on PSC1 */
#define CONFIG_SERIAL_MULTI 1 /* support multiple consoles */
#define CONFIG_PSC_CONSOLE2 6 /* second console is on PSC6 */
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

View file

@ -31,7 +31,6 @@
/*
* UART
*/
#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1

View file

@ -108,7 +108,6 @@
#define CONFIG_LOADS_ECHO 1
#define CONFIG_JTAG_CONSOLE
#define CONFIG_SILENT_CONSOLE
#define CONFIG_SERIAL_MULTI
#ifndef CONFIG_BAUDRATE
# define CONFIG_BAUDRATE 57600
#endif

View file

@ -54,7 +54,6 @@
/*-----------------------------------------------------------------------
* Serial Configuration
*/
#define CONFIG_SERIAL_MULTI
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL

View file

@ -55,7 +55,6 @@
/*-----------------------------------------------------------------------
* Serial Configuration
*/
#define CONFIG_SERIAL_MULTI
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL

View file

@ -37,7 +37,6 @@
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD
/* UARTD: keyboard satellite board UART, default */

View file

@ -68,7 +68,6 @@
/*
* Serial
*/
#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)

View file

@ -102,7 +102,6 @@
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

View file

@ -60,7 +60,6 @@
#define CONFIG_LCD_INFO 1 /* ... and some board info */
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
#define CONFIG_8xx_CONS_SCC2 1 /* Console is on SCC2 */

View file

@ -121,7 +121,6 @@
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

View file

@ -76,17 +76,12 @@
*/
#if !defined(CONFIG_PRS200)
/* MCC200 configuration: */
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */
#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */
#else
/* PRS200 configuration: */
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
#endif
#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
!defined(CONFIG_SERIAL_MULTI)
#error "Select only one console device!"
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

View file

@ -38,7 +38,6 @@
#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE

View file

@ -76,7 +76,6 @@
* NS16550 Configuration
* Zoom2 uses the TL16CP754C on the debug board
*/
#define CONFIG_SERIAL_MULTI 1
/*
* 0 - 1 : first USB with respect to the left edge of the debug board
* 2 - 3 : second USB with respect to the left edge of the debug board

View file

@ -63,7 +63,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000

View file

@ -30,7 +30,6 @@
#define CONFIG_TEGRA_BOARD_STRING "Compal Paz00"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE

View file

@ -88,7 +88,6 @@
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clk used */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

View file

@ -298,7 +298,6 @@
/*
* Used PSC UART devices
*/
#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_PSC1
#define CONFIG_SYS_PSC4
#define CONFIG_SYS_PSC6
@ -434,10 +433,8 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#ifdef CONFIG_SERIAL_MULTI
/* POST support */
#define CONFIG_POST (CONFIG_SYS_POST_COPROC)
#endif
/*
* Environment Configuration

View file

@ -38,7 +38,6 @@
#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE

View file

@ -113,7 +113,6 @@
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
#define CONFIG_SYS_BASE_BAUD 691200
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \

View file

@ -59,7 +59,6 @@
* select serial console configuration
*/
#define CONFIG_SERIAL2 1 /* use SERIAL2 */
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 115200
/* MMC */

View file

@ -61,7 +61,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
#define CONFIG_BAUDRATE 115200

View file

@ -83,7 +83,6 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SERIAL_MULTI
/*
* define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz

View file

@ -45,7 +45,6 @@
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE

View file

@ -68,7 +68,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000

View file

@ -64,7 +64,6 @@
* select serial console configuration
*/
#define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */
#define CONFIG_SERIAL_MULTI 1
/* PWM */
#define CONFIG_PWM 1

View file

@ -62,7 +62,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SERIAL1 1 /* use SERIAL 1 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS4_DEFAULT_UART_OFFSET 0x010000

View file

@ -39,7 +39,6 @@
#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE

View file

@ -154,11 +154,6 @@
#undef CONFIG_OF_CONTROL
#endif
/* remove SERIAL_MULTI */
#ifdef CONFIG_SERIAL_MULTI
#undef CONFIG_SERIAL_MULTI
#endif
/* remove I2C support */
#ifdef CONFIG_TEGRA_I2C
#undef CONFIG_TEGRA_I2C

View file

@ -69,7 +69,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI
#define CONFIG_SERIAL2 /* use SERIAL 2 */
#define CONFIG_BAUDRATE 115200

View file

@ -37,7 +37,6 @@
#define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_GPU
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE

View file

@ -64,7 +64,6 @@
* select serial console configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_SERIAL_MULTI
#define CONFIG_FFUART 1 /* we use FFUART on Conxs */
#define CONFIG_BTUART 1 /* we use BTUART on Conxs */
#define CONFIG_STUART 1 /* we use STUART on Conxs */

View file

@ -37,7 +37,6 @@
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE

View file

@ -37,7 +37,6 @@
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_UAA_UAB
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE

View file

@ -130,7 +130,6 @@
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
#define CONFIG_SYS_BASE_BAUD 691200
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

View file

@ -45,7 +45,6 @@
#define CONFIG_BAUDRATE 115200
/* XPSS Serial driver */
#define CONFIG_SERIAL_MULTI
#define CONFIG_ZYNQ_SERIAL
#define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000
#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE