imx9: imx93_evk: Add binman support.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>

arch/arm/dts/imx93-11x11-evk-u-boot.dtsi

@@ -3,6 +3,8 @@
  * Copyright 2022 NXP
  */
 
+#include "imx93-u-boot.dtsi"
+
 / {
 	wdt-reboot {
 		compatible = "wdt-reboot";

arch/arm/mach-imx/imx9/Kconfig

@@ -29,6 +29,7 @@ choice
 
 config TARGET_IMX93_11X11_EVK
 	bool "imx93_11x11_evk"
+        select BINMAN
 	select IMX93
 
 endchoice

configs/imx93_11x11_evk_defconfig

@@ -8,6 +8,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x700000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
 CONFIG_SPL_TEXT_BASE=0x2049A000

configs/imx93_11x11_evk_ld_defconfig

@@ -8,6 +8,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x400000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
 CONFIG_SPL_TEXT_BASE=0x2049A000

doc/board/nxp/imx93_11x11_evk.rst

@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx93_11x11_evk
+=======================
+
+U-Boot for the NXP i.MX93 EVK on the 11x11mm board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.8
+
+.. code-block:: bash
+
+   $ unset LDFLAGS
+   $ make PLAT=imx93 bl31
+   $ cp build/imx93/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+   $ chmod +x firmware-imx-8.21.bin
+   $ ./firmware-imx-8.21.bin
+   $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
+   $ chmod +x firmware-sentinel-0.10.bin
+   $ ./firmware-sentinel-0.10.bin
+   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx93_11x11_evk_defconfig
+   $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot

doc/board/nxp/index.rst

@@ -11,6 +11,7 @@ NXP Semiconductors
    imx8mp_evk
    imx8mq_evk
    imx8qxp_mek
+   imx93_11x11_evk
    imxrt1020-evk
    imxrt1050-evk
    ls1046ardb