mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
This board file supports standard features of Odroid X2 and U3 boards: - Exynos4412 core clock set to 1000MHz and MPLL peripherial clock set to 800MHz, - MAX77686 power regulator, - USB PHY, - enable XCL205 - power for board peripherials - check board type: U3 or X2. - enable Odroid U3 FAN cooler Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Przemyslaw Marczak
Minkyu Kang
parent
c9c36bf56e
commit
bf3a08bec8
3 changed files with 733 additions and 0 deletions
8
board/samsung/odroid/Makefile
Normal file
8
board/samsung/odroid/Makefile
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
#
|
||||
# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved.
|
||||
# Przemyslaw Marczak <p.marczak@samsung.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := odroid.o
|
||||
470
board/samsung/odroid/odroid.c
Normal file
470
board/samsung/odroid/odroid.c
Normal file
|
|
@ -0,0 +1,470 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Samsung Electronics
|
||||
* Przemyslaw Marczak <p.marczak@samsung.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/pinmux.h>
|
||||
#include <asm/arch/power.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <power/pmic.h>
|
||||
#include <power/max77686_pmic.h>
|
||||
#include <errno.h>
|
||||
#include <usb.h>
|
||||
#include <usb/s3c_udc.h>
|
||||
#include <samsung/misc.h>
|
||||
#include "setup.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#ifdef CONFIG_BOARD_TYPES
|
||||
/* Odroid board types */
|
||||
enum {
|
||||
ODROID_TYPE_U3,
|
||||
ODROID_TYPE_X2,
|
||||
ODROID_TYPES,
|
||||
};
|
||||
|
||||
void set_board_type(void)
|
||||
{
|
||||
/* Set GPA1 pin 1 to HI - enable XCL205 output */
|
||||
writel(XCL205_EN_GPIO_CON_CFG, XCL205_EN_GPIO_CON);
|
||||
writel(XCL205_EN_GPIO_DAT_CFG, XCL205_EN_GPIO_CON + 0x4);
|
||||
writel(XCL205_EN_GPIO_PUD_CFG, XCL205_EN_GPIO_CON + 0x8);
|
||||
writel(XCL205_EN_GPIO_DRV_CFG, XCL205_EN_GPIO_CON + 0xc);
|
||||
|
||||
/* Set GPC1 pin 2 to IN - check XCL205 output state */
|
||||
writel(XCL205_STATE_GPIO_CON_CFG, XCL205_STATE_GPIO_CON);
|
||||
writel(XCL205_STATE_GPIO_PUD_CFG, XCL205_STATE_GPIO_CON + 0x8);
|
||||
|
||||
/* XCL205 - needs some latch time */
|
||||
sdelay(200000);
|
||||
|
||||
/* Check GPC1 pin2 - LED supplied by XCL205 - X2 only */
|
||||
if (readl(XCL205_STATE_GPIO_DAT) & (1 << XCL205_STATE_GPIO_PIN))
|
||||
gd->board_type = ODROID_TYPE_X2;
|
||||
else
|
||||
gd->board_type = ODROID_TYPE_U3;
|
||||
}
|
||||
|
||||
const char *get_board_type(void)
|
||||
{
|
||||
const char *board_type[] = {"u3", "x2"};
|
||||
|
||||
return board_type[gd->board_type];
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SET_DFU_ALT_INFO
|
||||
char *get_dfu_alt_system(void)
|
||||
{
|
||||
return getenv("dfu_alt_system");
|
||||
}
|
||||
|
||||
char *get_dfu_alt_boot(void)
|
||||
{
|
||||
char *alt_boot;
|
||||
|
||||
switch (get_boot_mode()) {
|
||||
case BOOT_MODE_SD:
|
||||
alt_boot = CONFIG_DFU_ALT_BOOT_SD;
|
||||
break;
|
||||
case BOOT_MODE_EMMC:
|
||||
case BOOT_MODE_EMMC_SD:
|
||||
alt_boot = CONFIG_DFU_ALT_BOOT_EMMC;
|
||||
break;
|
||||
default:
|
||||
alt_boot = NULL;
|
||||
break;
|
||||
}
|
||||
return alt_boot;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void board_clock_init(void)
|
||||
{
|
||||
unsigned int set, clr, clr_src_cpu, clr_pll_con0, clr_src_dmc;
|
||||
struct exynos4x12_clock *clk = (struct exynos4x12_clock *)
|
||||
samsung_get_base_clock();
|
||||
|
||||
/*
|
||||
* CMU_CPU clocks src to MPLL
|
||||
* Bit values: 0 ; 1
|
||||
* MUX_APLL_SEL: FIN_PLL ; FOUT_APLL
|
||||
* MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL
|
||||
* MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C
|
||||
* MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL
|
||||
*/
|
||||
clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1) |
|
||||
MUX_HPM_SEL(1) | MUX_MPLL_USER_SEL_C(1);
|
||||
set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1) | MUX_HPM_SEL(1) |
|
||||
MUX_MPLL_USER_SEL_C(1);
|
||||
|
||||
clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
|
||||
|
||||
/* Wait for mux change */
|
||||
while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING)
|
||||
continue;
|
||||
|
||||
/* Set APLL to 1000MHz */
|
||||
clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1);
|
||||
set = SDIV(0) | PDIV(3) | MDIV(125) | FSEL(1);
|
||||
|
||||
clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
|
||||
|
||||
/* Wait for PLL to be locked */
|
||||
while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
|
||||
continue;
|
||||
|
||||
/* Set CMU_CPU clocks src to APLL */
|
||||
set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0) | MUX_HPM_SEL(0) |
|
||||
MUX_MPLL_USER_SEL_C(1);
|
||||
clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
|
||||
|
||||
/* Wait for mux change */
|
||||
while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING)
|
||||
continue;
|
||||
|
||||
set = CORE_RATIO(0) | COREM0_RATIO(2) | COREM1_RATIO(5) |
|
||||
PERIPH_RATIO(0) | ATB_RATIO(4) | PCLK_DBG_RATIO(1) |
|
||||
APLL_RATIO(0) | CORE2_RATIO(0);
|
||||
/*
|
||||
* Set dividers for MOUTcore = 1000 MHz
|
||||
* coreout = MOUT / (ratio + 1) = 1000 MHz (0)
|
||||
* corem0 = armclk / (ratio + 1) = 333 MHz (2)
|
||||
* corem1 = armclk / (ratio + 1) = 166 MHz (5)
|
||||
* periph = armclk / (ratio + 1) = 1000 MHz (0)
|
||||
* atbout = MOUT / (ratio + 1) = 200 MHz (4)
|
||||
* pclkdbgout = atbout / (ratio + 1) = 100 MHz (1)
|
||||
* sclkapll = MOUTapll / (ratio + 1) = 1000 MHz (0)
|
||||
* core2out = core_out / (ratio + 1) = 1000 MHz (0) (armclk)
|
||||
*/
|
||||
clr = CORE_RATIO(7) | COREM0_RATIO(7) | COREM1_RATIO(7) |
|
||||
PERIPH_RATIO(7) | ATB_RATIO(7) | PCLK_DBG_RATIO(7) |
|
||||
APLL_RATIO(7) | CORE2_RATIO(7);
|
||||
|
||||
clrsetbits_le32(&clk->div_cpu0, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
|
||||
continue;
|
||||
|
||||
/*
|
||||
* For MOUThpm = 1000 MHz (MOUTapll)
|
||||
* doutcopy = MOUThpm / (ratio + 1) = 200 (4)
|
||||
* sclkhpm = doutcopy / (ratio + 1) = 200 (4)
|
||||
* cores_out = armclk / (ratio + 1) = 1000 (0)
|
||||
*/
|
||||
clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7);
|
||||
set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(0);
|
||||
|
||||
clrsetbits_le32(&clk->div_cpu1, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_cpu1) & DIV_STAT_CPU1_CHANGING)
|
||||
continue;
|
||||
|
||||
/*
|
||||
* Set CMU_DMC clocks src to APLL
|
||||
* Bit values: 0 ; 1
|
||||
* MUX_C2C_SEL: SCLKMPLL ; SCLKAPLL
|
||||
* MUX_DMC_BUS_SEL: SCLKMPLL ; SCLKAPLL
|
||||
* MUX_DPHY_SEL: SCLKMPLL ; SCLKAPLL
|
||||
* MUX_MPLL_SEL: FINPLL ; MOUT_MPLL_FOUT
|
||||
* MUX_PWI_SEL: 0110 (MPLL); 0111 (EPLL); 1000 (VPLL); 0(XXTI)
|
||||
* MUX_G2D_ACP0_SEL: SCLKMPLL ; SCLKAPLL
|
||||
* MUX_G2D_ACP1_SEL: SCLKEPLL ; SCLKVPLL
|
||||
* MUX_G2D_ACP_SEL: OUT_ACP0 ; OUT_ACP1
|
||||
*/
|
||||
clr_src_dmc = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) |
|
||||
MUX_DPHY_SEL(1) | MUX_MPLL_SEL(1) |
|
||||
MUX_PWI_SEL(15) | MUX_G2D_ACP0_SEL(1) |
|
||||
MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1);
|
||||
set = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) | MUX_DPHY_SEL(1) |
|
||||
MUX_MPLL_SEL(0) | MUX_PWI_SEL(0) | MUX_G2D_ACP0_SEL(1) |
|
||||
MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1);
|
||||
|
||||
clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set);
|
||||
|
||||
/* Wait for mux change */
|
||||
while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
|
||||
continue;
|
||||
|
||||
/* Set MPLL to 800MHz */
|
||||
set = SDIV(0) | PDIV(3) | MDIV(100) | FSEL(0) | PLL_ENABLE(1);
|
||||
|
||||
clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
|
||||
|
||||
/* Wait for PLL to be locked */
|
||||
while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
|
||||
continue;
|
||||
|
||||
/* Switch back CMU_DMC mux */
|
||||
set = MUX_C2C_SEL(0) | MUX_DMC_BUS_SEL(0) | MUX_DPHY_SEL(0) |
|
||||
MUX_MPLL_SEL(1) | MUX_PWI_SEL(8) | MUX_G2D_ACP0_SEL(0) |
|
||||
MUX_G2D_ACP1_SEL(0) | MUX_G2D_ACP_SEL(0);
|
||||
|
||||
clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set);
|
||||
|
||||
/* Wait for mux change */
|
||||
while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_DIV_DMC0 */
|
||||
clr = ACP_RATIO(7) | ACP_PCLK_RATIO(7) | DPHY_RATIO(7) |
|
||||
DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7);
|
||||
/*
|
||||
* For:
|
||||
* MOUTdmc = 800 MHz
|
||||
* MOUTdphy = 800 MHz
|
||||
*
|
||||
* aclk_acp = MOUTdmc / (ratio + 1) = 200 (3)
|
||||
* pclk_acp = aclk_acp / (ratio + 1) = 100 (1)
|
||||
* sclk_dphy = MOUTdphy / (ratio + 1) = 400 (1)
|
||||
* sclk_dmc = MOUTdmc / (ratio + 1) = 400 (1)
|
||||
* aclk_dmcd = sclk_dmc / (ratio + 1) = 200 (1)
|
||||
* aclk_dmcp = aclk_dmcd / (ratio + 1) = 100 (1)
|
||||
*/
|
||||
set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) |
|
||||
DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1);
|
||||
|
||||
clrsetbits_le32(&clk->div_dmc0, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_dmc0) & DIV_STAT_DMC0_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_DIV_DMC1 */
|
||||
clr = G2D_ACP_RATIO(15) | C2C_RATIO(7) | PWI_RATIO(15) |
|
||||
C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127);
|
||||
/*
|
||||
* For:
|
||||
* MOUTg2d = 800 MHz
|
||||
* MOUTc2c = 800 Mhz
|
||||
* MOUTpwi = 108 MHz
|
||||
*
|
||||
* sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1)
|
||||
* sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
|
||||
* aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
|
||||
* sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
|
||||
*/
|
||||
set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) |
|
||||
C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
|
||||
|
||||
clrsetbits_le32(&clk->div_dmc1, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_dmc1) & DIV_STAT_DMC1_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_SRC_PERIL0 */
|
||||
clr = UART0_SEL(15) | UART1_SEL(15) | UART2_SEL(15) |
|
||||
UART3_SEL(15) | UART4_SEL(15);
|
||||
/*
|
||||
* Set CLK_SRC_PERIL0 clocks src to MPLL
|
||||
* src values: 0(XXTI); 1(XusbXTI); 2(SCLK_HDMI24M); 3(SCLK_USBPHY0);
|
||||
* 5(SCLK_HDMIPHY); 6(SCLK_MPLL_USER_T); 7(SCLK_EPLL);
|
||||
* 8(SCLK_VPLL)
|
||||
*
|
||||
* Set all to SCLK_MPLL_USER_T
|
||||
*/
|
||||
set = UART0_SEL(6) | UART1_SEL(6) | UART2_SEL(6) | UART3_SEL(6) |
|
||||
UART4_SEL(6);
|
||||
|
||||
clrsetbits_le32(&clk->src_peril0, clr, set);
|
||||
|
||||
/* CLK_DIV_PERIL0 */
|
||||
clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
|
||||
UART3_RATIO(15) | UART4_RATIO(15);
|
||||
/*
|
||||
* For MOUTuart0-4: 800MHz
|
||||
*
|
||||
* SCLK_UARTx = MOUTuartX / (ratio + 1) = 100 (7)
|
||||
*/
|
||||
set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) |
|
||||
UART3_RATIO(7) | UART4_RATIO(7);
|
||||
|
||||
clrsetbits_le32(&clk->div_peril0, clr, set);
|
||||
|
||||
while (readl(&clk->div_stat_peril0) & DIV_STAT_PERIL0_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_DIV_FSYS1 */
|
||||
clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) |
|
||||
MMC1_PRE_RATIO(255);
|
||||
/*
|
||||
* For MOUTmmc0-3 = 800 MHz (MPLL)
|
||||
*
|
||||
* DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 100 (7)
|
||||
* sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 50 (1)
|
||||
* DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 100 (7)
|
||||
* sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 50 (1)
|
||||
*/
|
||||
set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) |
|
||||
MMC1_PRE_RATIO(1);
|
||||
|
||||
clrsetbits_le32(&clk->div_fsys1, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_DIV_FSYS2 */
|
||||
clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) |
|
||||
MMC3_PRE_RATIO(255);
|
||||
/*
|
||||
* For MOUTmmc0-3 = 800 MHz (MPLL)
|
||||
*
|
||||
* DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 100 (7)
|
||||
* sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 50 (1)
|
||||
* DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 100 (7)
|
||||
* sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 50 (1)
|
||||
*/
|
||||
set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) |
|
||||
MMC3_PRE_RATIO(1);
|
||||
|
||||
clrsetbits_le32(&clk->div_fsys2, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_fsys2) & DIV_STAT_FSYS2_CHANGING)
|
||||
continue;
|
||||
|
||||
/* CLK_DIV_FSYS3 */
|
||||
clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255);
|
||||
/*
|
||||
* For MOUTmmc4 = 800 MHz (MPLL)
|
||||
*
|
||||
* DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 100 (7)
|
||||
* sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 100 (0)
|
||||
*/
|
||||
set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0);
|
||||
|
||||
clrsetbits_le32(&clk->div_fsys3, clr, set);
|
||||
|
||||
/* Wait for divider ready status */
|
||||
while (readl(&clk->div_stat_fsys3) & DIV_STAT_FSYS3_CHANGING)
|
||||
continue;
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static void board_gpio_init(void)
|
||||
{
|
||||
/* eMMC Reset Pin */
|
||||
gpio_cfg_pin(EXYNOS4X12_GPIO_K12, S5P_GPIO_FUNC(0x1));
|
||||
gpio_set_pull(EXYNOS4X12_GPIO_K12, S5P_GPIO_PULL_NONE);
|
||||
gpio_set_drv(EXYNOS4X12_GPIO_K12, S5P_GPIO_DRV_4X);
|
||||
|
||||
/* Enable FAN (Odroid U3) */
|
||||
gpio_set_pull(EXYNOS4X12_GPIO_D00, S5P_GPIO_PULL_UP);
|
||||
gpio_set_drv(EXYNOS4X12_GPIO_D00, S5P_GPIO_DRV_4X);
|
||||
gpio_direction_output(EXYNOS4X12_GPIO_D00, 1);
|
||||
|
||||
/* OTG Vbus output (Odroid U3+) */
|
||||
gpio_set_pull(EXYNOS4X12_GPIO_L20, S5P_GPIO_PULL_NONE);
|
||||
gpio_set_drv(EXYNOS4X12_GPIO_L20, S5P_GPIO_DRV_4X);
|
||||
gpio_direction_output(EXYNOS4X12_GPIO_L20, 0);
|
||||
|
||||
/* OTG INT (Odroid U3+) */
|
||||
gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP);
|
||||
gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X);
|
||||
gpio_direction_input(EXYNOS4X12_GPIO_X31);
|
||||
}
|
||||
|
||||
static int pmic_init_max77686(void)
|
||||
{
|
||||
struct pmic *p = pmic_get("MAX77686_PMIC");
|
||||
|
||||
if (pmic_probe(p))
|
||||
return -ENODEV;
|
||||
|
||||
/* Set LDO Voltage */
|
||||
max77686_set_ldo_voltage(p, 20, 1800000); /* LDO20 eMMC */
|
||||
max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 SD */
|
||||
max77686_set_ldo_voltage(p, 22, 2800000); /* LDO22 eMMC */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
||||
static void board_init_i2c(void)
|
||||
{
|
||||
/* I2C_0 */
|
||||
if (exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE))
|
||||
debug("I2C%d not configured\n", (I2C_0));
|
||||
}
|
||||
#endif
|
||||
|
||||
int exynos_early_init_f(void)
|
||||
{
|
||||
board_clock_init();
|
||||
board_gpio_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int exynos_init(void)
|
||||
{
|
||||
/* The last MB of memory is reserved for secure firmware */
|
||||
gd->ram_size -= SZ_1M;
|
||||
gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= SZ_1M;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int exynos_power_init(void)
|
||||
{
|
||||
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
||||
board_init_i2c();
|
||||
#endif
|
||||
pmic_init(I2C_0);
|
||||
pmic_init_max77686();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_USB_GADGET
|
||||
static int s5pc210_phy_control(int on)
|
||||
{
|
||||
struct pmic *p_pmic;
|
||||
|
||||
p_pmic = pmic_get("MAX77686_PMIC");
|
||||
if (!p_pmic)
|
||||
return -ENODEV;
|
||||
|
||||
if (pmic_probe(p_pmic))
|
||||
return -1;
|
||||
|
||||
if (on)
|
||||
return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
|
||||
else
|
||||
return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
|
||||
}
|
||||
|
||||
struct s3c_plat_otg_data s5pc210_otg_data = {
|
||||
.phy_control = s5pc210_phy_control,
|
||||
.regs_phy = EXYNOS4X12_USBPHY_BASE,
|
||||
.regs_otg = EXYNOS4X12_USBOTG_BASE,
|
||||
.usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
|
||||
.usb_flags = PHY0_SLEEP,
|
||||
};
|
||||
|
||||
int board_usb_init(int index, enum usb_init_type init)
|
||||
{
|
||||
debug("USB_udc_probe\n");
|
||||
return s3c_udc_probe(&s5pc210_otg_data);
|
||||
}
|
||||
#endif
|
||||
|
||||
void reset_misc(void)
|
||||
{
|
||||
/* Reset eMMC*/
|
||||
gpio_set_value(EXYNOS4X12_GPIO_K12, 0);
|
||||
mdelay(10);
|
||||
gpio_set_value(EXYNOS4X12_GPIO_K12, 1);
|
||||
}
|
||||
255
board/samsung/odroid/setup.h
Normal file
255
board/samsung/odroid/setup.h
Normal file
|
|
@ -0,0 +1,255 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Samsung Electronics
|
||||
* Przemyslaw Marczak <p.marczak@samsung.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __ODROIDU3_SETUP__
|
||||
#define __ODROIDU3_SETUP__
|
||||
|
||||
/* A/M PLL_CON0 */
|
||||
#define SDIV(x) ((x) & 0x7)
|
||||
#define PDIV(x) (((x) & 0x3f) << 8)
|
||||
#define MDIV(x) (((x) & 0x3ff) << 16)
|
||||
#define FSEL(x) (((x) & 0x1) << 27)
|
||||
#define PLL_LOCKED_BIT (0x1 << 29)
|
||||
#define PLL_ENABLE(x) (((x) & 0x1) << 31)
|
||||
|
||||
/* CLK_SRC_CPU */
|
||||
#define MUX_APLL_SEL(x) ((x) & 0x1)
|
||||
#define MUX_CORE_SEL(x) (((x) & 0x1) << 16)
|
||||
#define MUX_HPM_SEL(x) (((x) & 0x1) << 20)
|
||||
#define MUX_MPLL_USER_SEL_C(x) (((x) & 0x1) << 24)
|
||||
|
||||
#define MUX_STAT_CHANGING 0x100
|
||||
|
||||
/* CLK_MUX_STAT_CPU */
|
||||
#define APLL_SEL(x) ((x) & 0x7)
|
||||
#define CORE_SEL(x) (((x) & 0x7) << 16)
|
||||
#define HPM_SEL(x) (((x) & 0x7) << 20)
|
||||
#define MPLL_USER_SEL_C(x) (((x) & 0x7) << 24)
|
||||
#define MUX_STAT_CPU_CHANGING (APLL_SEL(MUX_STAT_CHANGING) | \
|
||||
CORE_SEL(MUX_STAT_CHANGING) | \
|
||||
HPM_SEL(MUX_STAT_CHANGING) | \
|
||||
MPLL_USER_SEL_C(MUX_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_CPU0 */
|
||||
#define CORE_RATIO(x) ((x) & 0x7)
|
||||
#define COREM0_RATIO(x) (((x) & 0x7) << 4)
|
||||
#define COREM1_RATIO(x) (((x) & 0x7) << 8)
|
||||
#define PERIPH_RATIO(x) (((x) & 0x7) << 12)
|
||||
#define ATB_RATIO(x) (((x) & 0x7) << 16)
|
||||
#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20)
|
||||
#define APLL_RATIO(x) (((x) & 0x7) << 24)
|
||||
#define CORE2_RATIO(x) (((x) & 0x7) << 28)
|
||||
|
||||
/* CLK_DIV_STAT_CPU0 */
|
||||
#define DIV_CORE(x) ((x) & 0x1)
|
||||
#define DIV_COREM0(x) (((x) & 0x1) << 4)
|
||||
#define DIV_COREM1(x) (((x) & 0x1) << 8)
|
||||
#define DIV_PERIPH(x) (((x) & 0x1) << 12)
|
||||
#define DIV_ATB(x) (((x) & 0x1) << 16)
|
||||
#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20)
|
||||
#define DIV_APLL(x) (((x) & 0x1) << 24)
|
||||
#define DIV_CORE2(x) (((x) & 0x1) << 28)
|
||||
|
||||
#define DIV_STAT_CHANGING 0x1
|
||||
#define DIV_STAT_CPU0_CHANGING (DIV_CORE(DIV_STAT_CHANGING) | \
|
||||
DIV_COREM0(DIV_STAT_CHANGING) | \
|
||||
DIV_COREM1(DIV_STAT_CHANGING) | \
|
||||
DIV_PERIPH(DIV_STAT_CHANGING) | \
|
||||
DIV_ATB(DIV_STAT_CHANGING) | \
|
||||
DIV_PCLK_DBG(DIV_STAT_CHANGING) | \
|
||||
DIV_APLL(DIV_STAT_CHANGING) | \
|
||||
DIV_CORE2(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_CPU1 */
|
||||
#define COPY_RATIO(x) ((x) & 0x7)
|
||||
#define HPM_RATIO(x) (((x) & 0x7) << 4)
|
||||
#define CORES_RATIO(x) (((x) & 0x7) << 8)
|
||||
|
||||
/* CLK_DIV_STAT_CPU1 */
|
||||
#define DIV_COPY(x) ((x) & 0x7)
|
||||
#define DIV_HPM(x) (((x) & 0x1) << 4)
|
||||
#define DIV_CORES(x) (((x) & 0x1) << 8)
|
||||
|
||||
#define DIV_STAT_CPU1_CHANGING (DIV_COPY(DIV_STAT_CHANGING) | \
|
||||
DIV_HPM(DIV_STAT_CHANGING) | \
|
||||
DIV_CORES(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_SRC_DMC */
|
||||
#define MUX_C2C_SEL(x) ((x) & 0x1)
|
||||
#define MUX_DMC_BUS_SEL(x) (((x) & 0x1) << 4)
|
||||
#define MUX_DPHY_SEL(x) (((x) & 0x1) << 8)
|
||||
#define MUX_MPLL_SEL(x) (((x) & 0x1) << 12)
|
||||
#define MUX_PWI_SEL(x) (((x) & 0xf) << 16)
|
||||
#define MUX_G2D_ACP0_SEL(x) (((x) & 0x1) << 20)
|
||||
#define MUX_G2D_ACP1_SEL(x) (((x) & 0x1) << 24)
|
||||
#define MUX_G2D_ACP_SEL(x) (((x) & 0x1) << 28)
|
||||
|
||||
/* CLK_MUX_STAT_DMC */
|
||||
#define C2C_SEL(x) (((x)) & 0x7)
|
||||
#define DMC_BUS_SEL(x) (((x) & 0x7) << 4)
|
||||
#define DPHY_SEL(x) (((x) & 0x7) << 8)
|
||||
#define MPLL_SEL(x) (((x) & 0x7) << 12)
|
||||
/* #define PWI_SEL(x) (((x) & 0xf) << 16) - Reserved */
|
||||
#define G2D_ACP0_SEL(x) (((x) & 0x7) << 20)
|
||||
#define G2D_ACP1_SEL(x) (((x) & 0x7) << 24)
|
||||
#define G2D_ACP_SEL(x) (((x) & 0x7) << 28)
|
||||
|
||||
#define MUX_STAT_DMC_CHANGING (C2C_SEL(MUX_STAT_CHANGING) | \
|
||||
DMC_BUS_SEL(MUX_STAT_CHANGING) | \
|
||||
DPHY_SEL(MUX_STAT_CHANGING) | \
|
||||
MPLL_SEL(MUX_STAT_CHANGING) |\
|
||||
G2D_ACP0_SEL(MUX_STAT_CHANGING) | \
|
||||
G2D_ACP1_SEL(MUX_STAT_CHANGING) | \
|
||||
G2D_ACP_SEL(MUX_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_DMC0 */
|
||||
#define ACP_RATIO(x) ((x) & 0x7)
|
||||
#define ACP_PCLK_RATIO(x) (((x) & 0x7) << 4)
|
||||
#define DPHY_RATIO(x) (((x) & 0x7) << 8)
|
||||
#define DMC_RATIO(x) (((x) & 0x7) << 12)
|
||||
#define DMCD_RATIO(x) (((x) & 0x7) << 16)
|
||||
#define DMCP_RATIO(x) (((x) & 0x7) << 20)
|
||||
|
||||
/* CLK_DIV_STAT_DMC0 */
|
||||
#define DIV_ACP(x) ((x) & 0x1)
|
||||
#define DIV_ACP_PCLK(x) (((x) & 0x1) << 4)
|
||||
#define DIV_DPHY(x) (((x) & 0x1) << 8)
|
||||
#define DIV_DMC(x) (((x) & 0x1) << 12)
|
||||
#define DIV_DMCD(x) (((x) & 0x1) << 16)
|
||||
#define DIV_DMCP(x) (((x) & 0x1) << 20)
|
||||
|
||||
#define DIV_STAT_DMC0_CHANGING (DIV_ACP(DIV_STAT_CHANGING) | \
|
||||
DIV_ACP_PCLK(DIV_STAT_CHANGING) | \
|
||||
DIV_DPHY(DIV_STAT_CHANGING) | \
|
||||
DIV_DMC(DIV_STAT_CHANGING) | \
|
||||
DIV_DMCD(DIV_STAT_CHANGING) | \
|
||||
DIV_DMCP(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_DMC1 */
|
||||
#define G2D_ACP_RATIO(x) ((x) & 0xf)
|
||||
#define C2C_RATIO(x) (((x) & 0x7) << 4)
|
||||
#define PWI_RATIO(x) (((x) & 0xf) << 8)
|
||||
#define C2C_ACLK_RATIO(x) (((x) & 0x7) << 12)
|
||||
#define DVSEM_RATIO(x) (((x) & 0x7f) << 16)
|
||||
#define DPM_RATIO(x) (((x) & 0x7f) << 24)
|
||||
|
||||
/* CLK_DIV_STAT_DMC1 */
|
||||
#define DIV_G2D_ACP(x) ((x) & 0x1)
|
||||
#define DIV_C2C(x) (((x) & 0x1) << 4)
|
||||
#define DIV_PWI(x) (((x) & 0x1) << 8)
|
||||
#define DIV_C2C_ACLK(x) (((x) & 0x1) << 12)
|
||||
#define DIV_DVSEM(x) (((x) & 0x1) << 16)
|
||||
#define DIV_DPM(x) (((x) & 0x1) << 24)
|
||||
|
||||
#define DIV_STAT_DMC1_CHANGING (DIV_G2D_ACP(DIV_STAT_CHANGING) | \
|
||||
DIV_C2C(DIV_STAT_CHANGING) | \
|
||||
DIV_PWI(DIV_STAT_CHANGING) | \
|
||||
DIV_C2C_ACLK(DIV_STAT_CHANGING) | \
|
||||
DIV_DVSEM(DIV_STAT_CHANGING) | \
|
||||
DIV_DPM(DIV_STAT_CHANGING))
|
||||
|
||||
/* Set CLK_SRC_PERIL0 */
|
||||
#define UART4_SEL(x) (((x) & 0xf) << 16)
|
||||
#define UART3_SEL(x) (((x) & 0xf) << 12)
|
||||
#define UART2_SEL(x) (((x) & 0xf) << 8)
|
||||
#define UART1_SEL(x) (((x) & 0xf) << 4)
|
||||
#define UART0_SEL(x) ((x) & 0xf)
|
||||
|
||||
/* Set CLK_DIV_PERIL0 */
|
||||
#define UART4_RATIO(x) (((x) & 0xf) << 16)
|
||||
#define UART3_RATIO(x) (((x) & 0xf) << 12)
|
||||
#define UART2_RATIO(x) (((x) & 0xf) << 8)
|
||||
#define UART1_RATIO(x) (((x) & 0xf) << 4)
|
||||
#define UART0_RATIO(x) ((x) & 0xf)
|
||||
|
||||
/* Set CLK_DIV_STAT_PERIL0 */
|
||||
#define DIV_UART4(x) (((x) & 0x1) << 16)
|
||||
#define DIV_UART3(x) (((x) & 0x1) << 12)
|
||||
#define DIV_UART2(x) (((x) & 0x1) << 8)
|
||||
#define DIV_UART1(x) (((x) & 0x1) << 4)
|
||||
#define DIV_UART0(x) ((x) & 0x1)
|
||||
|
||||
#define DIV_STAT_PERIL0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \
|
||||
DIV_UART3(DIV_STAT_CHANGING) | \
|
||||
DIV_UART2(DIV_STAT_CHANGING) | \
|
||||
DIV_UART1(DIV_STAT_CHANGING) | \
|
||||
DIV_UART0(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_FSYS1 */
|
||||
#define MMC0_RATIO(x) ((x) & 0xf)
|
||||
#define MMC0_PRE_RATIO(x) (((x) & 0xff) << 8)
|
||||
#define MMC1_RATIO(x) (((x) & 0xf) << 16)
|
||||
#define MMC1_PRE_RATIO(x) (((x) & 0xff) << 24)
|
||||
|
||||
/* CLK_DIV_STAT_FSYS1 */
|
||||
#define DIV_MMC0(x) ((x) & 1)
|
||||
#define DIV_MMC0_PRE(x) (((x) & 1) << 8)
|
||||
#define DIV_MMC1(x) (((x) & 1) << 16)
|
||||
#define DIV_MMC1_PRE(x) (((x) & 1) << 24)
|
||||
|
||||
#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC0_PRE(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC1(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC1_PRE(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_FSYS2 */
|
||||
#define MMC2_RATIO(x) ((x) & 0xf)
|
||||
#define MMC2_PRE_RATIO(x) (((x) & 0xff) << 8)
|
||||
#define MMC3_RATIO(x) (((x) & 0xf) << 16)
|
||||
#define MMC3_PRE_RATIO(x) (((x) & 0xff) << 24)
|
||||
|
||||
/* CLK_DIV_STAT_FSYS2 */
|
||||
#define DIV_MMC2(x) ((x) & 0x1)
|
||||
#define DIV_MMC2_PRE(x) (((x) & 0x1) << 8)
|
||||
#define DIV_MMC3(x) (((x) & 0x1) << 16)
|
||||
#define DIV_MMC3_PRE(x) (((x) & 0x1) << 24)
|
||||
|
||||
#define DIV_STAT_FSYS2_CHANGING (DIV_MMC2(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC2_PRE(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC3(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC3_PRE(DIV_STAT_CHANGING))
|
||||
|
||||
/* CLK_DIV_FSYS3 */
|
||||
#define MMC4_RATIO(x) ((x) & 0x7)
|
||||
#define MMC4_PRE_RATIO(x) (((x) & 0xff) << 8)
|
||||
|
||||
/* CLK_DIV_STAT_FSYS3 */
|
||||
#define DIV_MMC4(x) ((x) & 0x1)
|
||||
#define DIV_MMC4_PRE(x) (((x) & 0x1) << 8)
|
||||
|
||||
#define DIV_STAT_FSYS3_CHANGING (DIV_MMC4(DIV_STAT_CHANGING) | \
|
||||
DIV_MMC4_PRE(DIV_STAT_CHANGING))
|
||||
|
||||
/* XCL205 GPIO config - Odroid U3 */
|
||||
#define XCL205_GPIO_BASE EXYNOS4X12_GPIO_PART1_BASE
|
||||
#define XCL205_EN_GPIO_OFFSET 0x20 /* GPA1 */
|
||||
#define XCL205_EN_GPIO_PIN 1
|
||||
#define XCL205_EN_GPIO_CON (XCL205_GPIO_BASE + \
|
||||
XCL205_EN_GPIO_OFFSET)
|
||||
#define XCL205_EN_GPIO_CON_CFG (S5P_GPIO_OUTPUT << \
|
||||
4 * XCL205_EN_GPIO_PIN)
|
||||
#define XCL205_EN_GPIO_DAT_CFG (0x1 << XCL205_EN_GPIO_PIN)
|
||||
#define XCL205_EN_GPIO_PUD_CFG (S5P_GPIO_PULL_UP << \
|
||||
2 * XCL205_EN_GPIO_PIN)
|
||||
#define XCL205_EN_GPIO_DRV_CFG (S5P_GPIO_DRV_4X << \
|
||||
2 * XCL205_EN_GPIO_PIN)
|
||||
|
||||
#define XCL205_STATE_GPIO_OFFSET 0x80 /* GPC1 */
|
||||
#define XCL205_STATE_GPIO_PIN 2
|
||||
#define XCL205_STATE_GPIO_CON (XCL205_GPIO_BASE + \
|
||||
XCL205_STATE_GPIO_OFFSET)
|
||||
#define XCL205_STATE_GPIO_DAT XCL205_STATE_GPIO_CON + 0x4
|
||||
#define XCL205_STATE_GPIO_CON_CFG (S5P_GPIO_INPUT << \
|
||||
4 * XCL205_STATE_GPIO_PIN)
|
||||
#define XCL205_STATE_GPIO_PUD_CFG (S5P_GPIO_PULL_NONE << \
|
||||
2 * XCL205_STATE_GPIO_PIN)
|
||||
|
||||
#ifdef CONFIG_BOARD_TYPES
|
||||
extern void sdelay(unsigned long);
|
||||
#endif
|
||||
|
||||
#endif /*__ODROIDU3_SETUP__ */
|
||||
Loading…
Reference in a new issue