Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-21 07:01:57 +00:00
Code Issues Projects Releases Packages Wiki Activity

ARM: dra7x/am57x: Remove pin input/output config from WAKEUP pins

Browse source 
The WAKEUP_X pins are always an input no matter the pinmux mode.
However, the 18th bit that typical configures a pin as an input is
considered reserved for the WAKEUP_X pins. Therefore, for any WAKEUP
pin remove any configuration that sets that pin as an input. Since
those pins are only inputs remove any output configuration from those
pins.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
This commit is contained in:
Cooper Jr., Franklin 2015-11-19 08:03:54 -06:00 committed by Tom Rini
parent 2f3a5fee9e
commit bc622966c9
2 changed files with 5 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
board/ti/am57xx/mux_data.h
View file

@ -255,10 +255,10 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */
{I2C2_SDA, (M1 | PIN_INPUT)}, /* i2c2_sda.hdmi1_ddc_scl */
{I2C2_SCL, (M1 | PIN_INPUT)}, /* i2c2_scl.hdmi1_ddc_sda */
{WAKEUP0, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup0.Wakeup0 */
{WAKEUP1, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup1.Wakeup1 */
{WAKEUP2, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup2.Wakeup2 */
{WAKEUP3, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup3.Wakeup3 */
{WAKEUP0, (M0 | PULL_UP)}, /* Wakeup0.Wakeup0 */
{WAKEUP1, (M0)}, /* Wakeup1.Wakeup1 */
{WAKEUP2, (M0)}, /* Wakeup2.Wakeup2 */
{WAKEUP3, (M0 | PULL_UP)}, /* Wakeup3.Wakeup3 */
{ON_OFF, (M1 | PIN_OUTPUT_PULLUP)}, /* on_off.on_off */
{RTC_PORZ, (M0 | PIN_OUTPUT_PULLDOWN)}, /* rtc_porz.rtc_porz */
{RTCK, (M0 | PIN_INPUT_PULLDOWN)}, /* rtck.rtck */

2
board/ti/dra7xx/mux_data.h
View file

@ -372,7 +372,7 @@ const struct pad_conf_entry dra74x_core_padconf_array[] = {
{I2C2_SDA, (M0 | PIN_INPUT_PULLUP)}, /* i2c2_sda.i2c2_sda */
{I2C2_SCL, (M0 | PIN_INPUT_PULLUP)}, /* i2c2_scl.i2c2_scl */
{WAKEUP0, (M15 | PULL_UP)}, /* Wakeup0.safe for dcan1_rx */
{WAKEUP2, (M14 | PIN_OUTPUT)}, /* Wakeup2.gpio1_2 */
{WAKEUP2, (M14)}, /* Wakeup2.gpio1_2 */
};
#ifdef CONFIG_IODELAY_RECALIBRATION