fpga: altera: cyclon2: Fix most checkpatch warnings

Nothing special, but done before further cleanup.

* spacing
* braces
* __FUNCTION__ → __func__

Suggested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
This commit is contained in:
Alexander Dahl 2019-06-28 14:41:21 +02:00 committed by Michal Simek
parent 3b2a595fc6
commit bb2c0fa03e

View file

@ -11,9 +11,9 @@
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#define PRINTF(fmt, args...) printf(fmt, ##args)
#else
#define PRINTF(fmt,args...)
#define PRINTF(fmt, args...)
#endif
/* Note: The assumption is that we cannot possibly run fast enough to
@ -26,7 +26,7 @@
#endif
#ifndef CONFIG_SYS_FPGA_WAIT
#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10 /* 100 ms */
#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ / 10 /* 100 ms */
#endif
static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize);
@ -41,8 +41,8 @@ int CYC2_load(Altera_desc *desc, const void *buf, size_t bsize)
switch (desc->iface) {
case passive_serial:
PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
ret_val = CYC2_ps_load (desc, buf, bsize);
PRINTF("%s: Launching Passive Serial Loader\n", __func__);
ret_val = CYC2_ps_load(desc, buf, bsize);
break;
case fast_passive_parallel:
@ -50,16 +50,16 @@ int CYC2_load(Altera_desc *desc, const void *buf, size_t bsize)
* done in the write() callback. Use the existing PS load
* function for FPP, too.
*/
PRINTF ("%s: Launching Fast Passive Parallel Loader\n",
__FUNCTION__);
PRINTF("%s: Launching Fast Passive Parallel Loader\n",
__func__);
ret_val = CYC2_ps_load(desc, buf, bsize);
break;
/* Add new interface types here */
default:
printf ("%s: Unsupported interface type, %d\n",
__FUNCTION__, desc->iface);
printf("%s: Unsupported interface type, %d\n",
__func__, desc->iface);
}
return ret_val;
@ -71,59 +71,58 @@ int CYC2_dump(Altera_desc *desc, const void *buf, size_t bsize)
switch (desc->iface) {
case passive_serial:
PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
ret_val = CYC2_ps_dump (desc, buf, bsize);
PRINTF("%s: Launching Passive Serial Dump\n", __func__);
ret_val = CYC2_ps_dump(desc, buf, bsize);
break;
/* Add new interface types here */
default:
printf ("%s: Unsupported interface type, %d\n",
__FUNCTION__, desc->iface);
printf("%s: Unsupported interface type, %d\n",
__func__, desc->iface);
}
return ret_val;
}
int CYC2_info( Altera_desc *desc )
int CYC2_info(Altera_desc *desc)
{
return FPGA_SUCCESS;
}
/* ------------------------------------------------------------------------- */
/* CYCLON2 Passive Serial Generic Implementation */
/* CYCLON2 Passive Serial Generic Implementation */
static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume the worst */
Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
int ret = 0;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
PRINTF("%s: start with interface functions @ 0x%p\n",
__func__, fn);
if (fn) {
int cookie = desc->cookie; /* make a local copy */
unsigned long ts; /* timestamp */
PRINTF ("%s: Function Table:\n"
PRINTF("%s: Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"config:\t0x%p\n"
"status:\t0x%p\n"
"write:\t0x%p\n"
"done:\t0x%p\n\n",
__FUNCTION__, &fn, fn, fn->config, fn->status,
__func__, &fn, fn, fn->config, fn->status,
fn->write, fn->done);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Loading FPGA Device %d...", cookie);
printf("Loading FPGA Device %d...", cookie);
#endif
/*
* Run the pre configuration function if there is one.
*/
if (*fn->pre) {
if (*fn->pre)
(*fn->pre) (cookie);
}
/* Establish the initial state */
(*fn->config) (false, true, cookie); /* De-assert nCONFIG */
@ -133,22 +132,23 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
udelay(2); /* T_cfg > 2us */
/* Wait for nSTATUS to be asserted */
ts = get_timer (0); /* get current time */
ts = get_timer(0); /* get current time */
do {
CONFIG_FPGA_DELAY ();
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for STATUS to go high.\n");
CONFIG_FPGA_DELAY();
if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
/* check the time */
puts("** Timeout waiting for STATUS to go high.\n");
(*fn->abort) (cookie);
return FPGA_FAIL;
}
} while (!(*fn->status) (cookie));
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
CONFIG_FPGA_DELAY();
ret = (*fn->write) (buf, bsize, true, cookie);
if (ret) {
puts ("** Write failed.\n");
puts("** Write failed.\n");
(*fn->abort) (cookie);
return FPGA_FAIL;
}
@ -156,20 +156,20 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
puts(" OK? ...");
#endif
CONFIG_FPGA_DELAY ();
CONFIG_FPGA_DELAY();
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc (' '); /* terminate the dotted line */
putc(' '); /* terminate the dotted line */
#endif
/*
* Checking FPGA's CONF_DONE signal - correctly booted ?
*/
if ( ! (*fn->done) (cookie) ) {
puts ("** Booting failed! CONF_DONE is still deasserted.\n");
if (!(*fn->done) (cookie)) {
puts("** Booting failed! CONF_DONE is still deasserted.\n");
(*fn->abort) (cookie);
return (FPGA_FAIL);
return FPGA_FAIL;
}
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
puts(" OK\n");
@ -178,17 +178,15 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
ret_val = FPGA_SUCCESS;
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
}
else {
puts ("Fail.\n");
}
if (ret_val == FPGA_SUCCESS)
puts("Done.\n");
else
puts("Fail.\n");
#endif
(*fn->post) (cookie);
} else {
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
printf("%s: NULL Interface function table!\n", __func__);
}
return ret_val;
@ -198,7 +196,6 @@ static int CYC2_ps_dump(Altera_desc *desc, const void *buf, size_t bsize)
{
/* Readback is only available through the Slave Parallel and */
/* boundary-scan interfaces. */
printf ("%s: Passive Serial Dumping is unavailable\n",
__FUNCTION__);
printf("%s: Passive Serial Dumping is unavailable\n", __func__);
return FPGA_FAIL;
}