imx: mx6ull: adjust POR_B setting for i.MX6ULL

Adjust POR_B settings on i.MX6ULL according to IC design
team's suggestion:

2'b00 :  always PUP100K
2'b01 :  PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL
2'b10 :  always disable PUP100K
2'b11 :  PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Peng Fan 2016-08-11 14:02:46 +08:00 committed by Stefano Babic
parent 6615da4da3
commit b4714616a0

View file

@ -366,6 +366,20 @@ int arch_cpu_init(void)
writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
}
if (is_mx6ull()) {
/*
* GPBIT[1:0] is suggested to set to 2'b11:
* 2'b00 : always PUP100K
* 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
* 2'b10 : always disable PUP100K
* 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
* register offset is different from i.MX6UL, since
* i.MX6UL is fixed by ECO.
*/
writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
0x3, MX6UL_SNVS_LP_BASE_ADDR);
}
/* Set perclk to source from OSC 24MHz */
#if defined(CONFIG_MX6SL)
set_preclk_from_osc();