mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
NDS32: Generic Board Support and Unsupport
Remove ag101 and ag102 support Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
This commit is contained in:
Kun-Hua Huang
Tom Rini
parent
2e88bb28d8
commit
b3537c08e1
21 changed files with 0 additions and 1731 deletions
|
|
@ -8,19 +8,11 @@ choice
|
|||
prompt "Target select"
|
||||
optional
|
||||
|
||||
config TARGET_ADP_AG101
|
||||
bool "Support adp-ag101"
|
||||
|
||||
config TARGET_ADP_AG101P
|
||||
bool "Support adp-ag101p"
|
||||
|
||||
config TARGET_ADP_AG102
|
||||
bool "Support adp-ag102"
|
||||
|
||||
endchoice
|
||||
|
||||
source "board/AndesTech/adp-ag101/Kconfig"
|
||||
source "board/AndesTech/adp-ag101p/Kconfig"
|
||||
source "board/AndesTech/adp-ag102/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -1,21 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# Copyright (C) 2011 Andes Technology Corporation
|
||||
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := cpu.o timer.o
|
||||
|
||||
ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
obj-y += lowlevel_init.o
|
||||
endif
|
||||
|
||||
ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
|
||||
obj-y += watchdog.o
|
||||
endif
|
||||
|
|
@ -1,67 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2002
|
||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||
* Marius Groeger <mgroeger@sysgo.de>
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
|
||||
*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/* CPU specific code */
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <watchdog.h>
|
||||
#include <asm/cache.h>
|
||||
|
||||
#include <faraday/ftwdt010_wdt.h>
|
||||
|
||||
/*
|
||||
* cleanup_before_linux() is called just before we call linux
|
||||
* it prepares the processor for linux
|
||||
*
|
||||
* we disable interrupt and caches.
|
||||
*/
|
||||
int cleanup_before_linux(void)
|
||||
{
|
||||
disable_interrupts();
|
||||
|
||||
#ifdef CONFIG_MMU
|
||||
/* turn off I/D-cache */
|
||||
icache_disable();
|
||||
dcache_disable();
|
||||
|
||||
/* flush I/D-cache */
|
||||
invalidate_icac();
|
||||
invalidate_dcac();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
disable_interrupts();
|
||||
|
||||
/*
|
||||
* reset to the base addr of andesboot.
|
||||
* currently no ROM loader at addr 0.
|
||||
* do not use reset_cpu(0);
|
||||
*/
|
||||
#ifdef CONFIG_FTWDT010_WATCHDOG
|
||||
/*
|
||||
* workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
|
||||
* automatic hardware reset when booting Linux.
|
||||
* Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
|
||||
*/
|
||||
ftwdt010_wdt_reset();
|
||||
#endif /* CONFIG_FTWDT010_WATCHDOG */
|
||||
hang();
|
||||
|
||||
/*NOTREACHED*/
|
||||
}
|
||||
|
|
@ -1,307 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
.text
|
||||
|
||||
#include <common.h>
|
||||
#include <config.h>
|
||||
|
||||
#include <asm/macro.h>
|
||||
#include <generated/asm-offsets.h>
|
||||
|
||||
/*
|
||||
* parameters for Synopsys DWC DDR2/DDR1 Memory Controller
|
||||
*/
|
||||
#define DDR2C_BASE_A (CONFIG_DWCDDR21MCTL_BASE)
|
||||
#define DDR2C_CCR_A (DDR2C_BASE_A + DWCDDR21MCTL_CCR)
|
||||
#define DDR2C_DCR_A (DDR2C_BASE_A + DWCDDR21MCTL_DCR)
|
||||
#define DDR2C_IOCR_A (DDR2C_BASE_A + DWCDDR21MCTL_IOCR)
|
||||
#define DDR2C_CSR_A (DDR2C_BASE_A + DWCDDR21MCTL_CSR)
|
||||
#define DDR2C_DRR_A (DDR2C_BASE_A + DWCDDR21MCTL_DRR)
|
||||
#define DDR2C_DLLCR0_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0)
|
||||
#define DDR2C_DLLCR1_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1)
|
||||
#define DDR2C_DLLCR2_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2)
|
||||
#define DDR2C_DLLCR3_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3)
|
||||
#define DDR2C_DLLCR4_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4)
|
||||
#define DDR2C_DLLCR5_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5)
|
||||
#define DDR2C_DLLCR6_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6)
|
||||
#define DDR2C_DLLCR7_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7)
|
||||
#define DDR2C_DLLCR8_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8)
|
||||
#define DDR2C_DLLCR9_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9)
|
||||
#define DDR2C_RSLR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RSLR0)
|
||||
#define DDR2C_RDGR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RDGR0)
|
||||
#define DDR2C_DTAR_A (DDR2C_BASE_A + DWCDDR21MCTL_DTAR)
|
||||
#define DDR2C_MR_A (DDR2C_BASE_A + DWCDDR21MCTL_MR)
|
||||
|
||||
#define DDR2C_CCR_D CONFIG_SYS_DWCDDR21MCTL_CCR
|
||||
#define DDR2C_CCR_D2 CONFIG_SYS_DWCDDR21MCTL_CCR2
|
||||
#define DDR2C_DCR_D CONFIG_SYS_DWCDDR21MCTL_DCR
|
||||
#define DDR2C_IOCR_D CONFIG_SYS_DWCDDR21MCTL_IOCR
|
||||
#define DDR2C_CSR_D CONFIG_SYS_DWCDDR21MCTL_CSR
|
||||
#define DDR2C_DRR_D CONFIG_SYS_DWCDDR21MCTL_DRR
|
||||
#define DDR2C_RSLR0_D CONFIG_SYS_DWCDDR21MCTL_RSLR0
|
||||
#define DDR2C_RDGR0_D CONFIG_SYS_DWCDDR21MCTL_RDGR0
|
||||
#define DDR2C_DTAR_D CONFIG_SYS_DWCDDR21MCTL_DTAR
|
||||
#define DDR2C_MR_D CONFIG_SYS_DWCDDR21MCTL_MR
|
||||
|
||||
#define DDR2C_DLLCR0_D CONFIG_SYS_DWCDDR21MCTL_DLLCR0 /* 0-9 are same */
|
||||
|
||||
/*
|
||||
* parameters for the ahbc controller
|
||||
*/
|
||||
#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
|
||||
#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
|
||||
|
||||
#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
|
||||
|
||||
/*
|
||||
* parameters for the ANDES PCU controller
|
||||
*/
|
||||
#define PCU_PCS4_A (CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4)
|
||||
#define PCU_PCS4_D CONFIG_SYS_ANDES_CPU_PCS4
|
||||
|
||||
/*
|
||||
* numeric 7 segment display
|
||||
*/
|
||||
.macro led, num
|
||||
write32 CONFIG_DEBUG_LED, \num
|
||||
.endm
|
||||
|
||||
/*
|
||||
* Waiting for SDRAM to set up
|
||||
*/
|
||||
/*
|
||||
.macro wait_sdram
|
||||
li $r0, DDR2C_CSR_A
|
||||
1:
|
||||
lwi $r1, [$r0+FTSDMC021_CR2]
|
||||
bnez $r1, 1b
|
||||
.endm
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
.globl lowlevel_init
|
||||
lowlevel_init:
|
||||
move $r10, $lp
|
||||
|
||||
/* U200 */
|
||||
! led 0x00
|
||||
! jal scale_to_500mhz
|
||||
|
||||
led 0x10
|
||||
jal mem_init
|
||||
|
||||
led 0x20
|
||||
jal remap
|
||||
|
||||
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
|
||||
led 0x2f
|
||||
jal enable_fpu
|
||||
#endif
|
||||
|
||||
led 0x30
|
||||
ret $r10
|
||||
|
||||
scale_to_500mhz:
|
||||
move $r11, $lp
|
||||
|
||||
/*
|
||||
* scale to 500Mhz
|
||||
*/
|
||||
led 0x01
|
||||
write32 PCU_PCS4_A, 0x1102000f ! save data to PCS4
|
||||
|
||||
move $lp, $r11
|
||||
ret
|
||||
|
||||
mem_init:
|
||||
move $r11, $lp
|
||||
|
||||
/*
|
||||
* config AHB Controller
|
||||
*/
|
||||
led 0x12
|
||||
write32 AHBC_BSR6_A, AHBC_BSR6_D
|
||||
|
||||
/*
|
||||
* config Synopsys DWC DDR2/DDR1 Memory Controller
|
||||
*/
|
||||
ddr2c_init:
|
||||
set_dcr:
|
||||
led 0x14
|
||||
write32 DDR2C_DCR_A, DDR2C_DCR_D ! 0x000020d4
|
||||
|
||||
auto_sizing:
|
||||
/*
|
||||
* ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13
|
||||
*/
|
||||
set_iocr:
|
||||
led 0x19
|
||||
write32 DDR2C_IOCR_A, DDR2C_IOCR_D
|
||||
set_drr:
|
||||
led 0x16
|
||||
write32 DDR2C_DRR_A, DDR2C_DRR_D ! 0x00034812
|
||||
set_dllcr:
|
||||
led 0x18
|
||||
write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D
|
||||
write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D
|
||||
set_rslr0:
|
||||
write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D ! 0x00000040
|
||||
set_rdgr0:
|
||||
write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D ! 0x000055cf
|
||||
set_dtar:
|
||||
led 0x15
|
||||
write32 DDR2C_DTAR_A, DDR2C_DTAR_D ! 0x00100000
|
||||
set_mode:
|
||||
led 0x17
|
||||
write32 DDR2C_MR_A, DDR2C_MR_D ! 0x00000852
|
||||
set_ccr:
|
||||
write32 DDR2C_CCR_A, DDR2C_CCR_D
|
||||
|
||||
#ifdef TRIGGER_INIT:
|
||||
trigger_init:
|
||||
write32 DDR2C_CCR_A, DDR2C_CCR_D ! 0x80020000
|
||||
|
||||
/* Wait for ddr init state to be set */
|
||||
msync ALL
|
||||
isb
|
||||
|
||||
/* Wait until the config initialization is finish */
|
||||
1:
|
||||
la $r4, DDR2C_CSR_A
|
||||
lwi $r5, [$r4]
|
||||
srli $r5, $r5, 23
|
||||
bnez $r5, 1b
|
||||
#endif
|
||||
|
||||
data_training:
|
||||
! write32 DDR2C_CCR_A, DDR2C_CCR_D2 ! 0x40020004
|
||||
|
||||
/* Wait for ddr init state to be set */
|
||||
msync ALL
|
||||
isb
|
||||
|
||||
/* wait until the ddr data trainning is complete */
|
||||
1:
|
||||
la $r4, DDR2C_CSR_A
|
||||
lwi $r5, [$r4]
|
||||
srli $r6, $r5, 23
|
||||
bnez $r6, 1b
|
||||
|
||||
lwi $r1, [$r4]
|
||||
srli $r6, $r5, 20
|
||||
li $r5, 0x00ffffff
|
||||
swi $r1, [$r4]
|
||||
bnez $r6, ddr2c_init
|
||||
|
||||
led 0x1a
|
||||
move $lp, $r11
|
||||
ret
|
||||
|
||||
remap:
|
||||
move $r11, $lp
|
||||
#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
|
||||
bal 2f
|
||||
relo_base:
|
||||
move $r0, $lp
|
||||
#else
|
||||
relo_base:
|
||||
mfusr $r0, $pc
|
||||
#endif /* __NDS32_N1213_43U1H__ */
|
||||
|
||||
/*
|
||||
* Remapping
|
||||
*/
|
||||
#ifdef CONFIG_MEM_REMAP
|
||||
/*
|
||||
* Copy ROM code to SDRAM base for memory remap layout.
|
||||
* This is not the real relocation, the real relocation is the function
|
||||
* relocate_code() is start.S which supports the systems is memory
|
||||
* remapped or not.
|
||||
*/
|
||||
/*
|
||||
* Doing memory remap is essential for preparing some non-OS or RTOS
|
||||
* applications.
|
||||
*
|
||||
* This is also a must on ADP-AG101 board.
|
||||
* The reason is because the ROM/FLASH circuit on PCB board.
|
||||
* AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
|
||||
* ROM/FLASH is used to boot.
|
||||
*
|
||||
* When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
|
||||
* and the FLASH is connected to BANK1.
|
||||
* When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
|
||||
* and the FLASH is connected to BANK0.
|
||||
* It will occur problem when doing flash probing if the flash is at
|
||||
* BANK0 (0x00000000) while memory remapping was skipped.
|
||||
*
|
||||
* Other board like ADP-AG101P may not enable this since there is only
|
||||
* a FLASH connected to bank0.
|
||||
*/
|
||||
led 0x21
|
||||
li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */
|
||||
li $r5, 0x0
|
||||
la $r1, relo_base /* get $pc or $lp */
|
||||
sub $r2, $r0, $r1
|
||||
sethi $r6, hi20(_end)
|
||||
ori $r6, $r6, lo12(_end)
|
||||
add $r6, $r6, $r2
|
||||
1:
|
||||
lwi.p $r7, [$r5], #4
|
||||
swi.p $r7, [$r4], #4
|
||||
blt $r5, $r6, 1b
|
||||
|
||||
/* set remap bit */
|
||||
/*
|
||||
* MEM remap bit is operational
|
||||
* - use it to map writeable memory at 0x00000000, in place of flash
|
||||
* - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
|
||||
* - after remap: flash/rom 0x80000000, sdram: 0x00000000
|
||||
*/
|
||||
led 0x2c
|
||||
setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
|
||||
|
||||
#endif /* #ifdef CONFIG_MEM_REMAP */
|
||||
move $lp, $r11
|
||||
2:
|
||||
ret
|
||||
|
||||
/*
|
||||
* enable_fpu:
|
||||
* Some of Andes CPU version support FPU coprocessor, if so,
|
||||
* and toolchain support FPU instruction set, we should enable it.
|
||||
*/
|
||||
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
|
||||
enable_fpu:
|
||||
mfsr $r0, $CPU_VER /* enable FPU if it exists */
|
||||
srli $r0, $r0, 3
|
||||
andi $r0, $r0, 1
|
||||
beqz $r0, 1f /* skip if no COP */
|
||||
mfsr $r0, $FUCOP_EXIST
|
||||
srli $r0, $r0, 31
|
||||
beqz $r0, 1f /* skip if no FPU */
|
||||
mfsr $r0, $FUCOP_CTL
|
||||
ori $r0, $r0, 1
|
||||
mtsr $r0, $FUCOP_CTL
|
||||
1:
|
||||
ret
|
||||
#endif
|
||||
|
||||
.globl show_led
|
||||
show_led:
|
||||
li $r8, (CONFIG_DEBUG_LED)
|
||||
swi $r7, [$r8]
|
||||
ret
|
||||
#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
|
||||
|
|
@ -1,191 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2009 Faraday Technology
|
||||
* Po-Yu Chuang <ratbert@faraday-tech.com>
|
||||
*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <faraday/fttmr010.h>
|
||||
|
||||
static ulong timestamp;
|
||||
static ulong lastdec;
|
||||
|
||||
int timer_init(void)
|
||||
{
|
||||
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
|
||||
unsigned int cr;
|
||||
|
||||
debug("%s()\n", __func__);
|
||||
|
||||
/* disable timers */
|
||||
writel(0, &tmr->cr);
|
||||
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
/* use 32768Hz oscillator for RTC, WDT, TIMER */
|
||||
ftpmu010_32768osc_enable();
|
||||
#endif
|
||||
|
||||
/* setup timer */
|
||||
writel(TIMER_LOAD_VAL, &tmr->timer3_load);
|
||||
writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
|
||||
writel(0, &tmr->timer3_match1);
|
||||
writel(0, &tmr->timer3_match2);
|
||||
|
||||
/* we don't want timer to issue interrupts */
|
||||
writel(FTTMR010_TM3_MATCH1 |
|
||||
FTTMR010_TM3_MATCH2 |
|
||||
FTTMR010_TM3_OVERFLOW,
|
||||
&tmr->interrupt_mask);
|
||||
|
||||
cr = readl(&tmr->cr);
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
cr |= FTTMR010_TM3_CLOCK; /* use external clock */
|
||||
#endif
|
||||
cr |= FTTMR010_TM3_ENABLE;
|
||||
writel(cr, &tmr->cr);
|
||||
|
||||
/* init the timestamp and lastdec value */
|
||||
reset_timer_masked();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* timer without interrupts
|
||||
*/
|
||||
|
||||
/*
|
||||
* reset time
|
||||
*/
|
||||
void reset_timer_masked(void)
|
||||
{
|
||||
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
|
||||
|
||||
/* capure current decrementer value time */
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
|
||||
#else
|
||||
lastdec = readl(&tmr->timer3_counter) /
|
||||
(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
|
||||
#endif
|
||||
timestamp = 0; /* start "advancing" time stamp from 0 */
|
||||
|
||||
debug("%s(): lastdec = %lx\n", __func__, lastdec);
|
||||
}
|
||||
|
||||
void reset_timer(void)
|
||||
{
|
||||
debug("%s()\n", __func__);
|
||||
reset_timer_masked();
|
||||
}
|
||||
|
||||
/*
|
||||
* return timer ticks
|
||||
*/
|
||||
ulong get_timer_masked(void)
|
||||
{
|
||||
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
|
||||
|
||||
/* current tick value */
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
|
||||
#else
|
||||
ulong now = readl(&tmr->timer3_counter) /
|
||||
(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
|
||||
#endif
|
||||
|
||||
debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
|
||||
|
||||
if (lastdec >= now) {
|
||||
/*
|
||||
* normal mode (non roll)
|
||||
* move stamp fordward with absoulte diff ticks
|
||||
*/
|
||||
timestamp += lastdec - now;
|
||||
} else {
|
||||
/*
|
||||
* we have overflow of the count down timer
|
||||
*
|
||||
* nts = ts + ld + (TLV - now)
|
||||
* ts=old stamp, ld=time that passed before passing through -1
|
||||
* (TLV-now) amount of time after passing though -1
|
||||
* nts = new "advancing time stamp"...it could also roll and
|
||||
* cause problems.
|
||||
*/
|
||||
timestamp += lastdec + TIMER_LOAD_VAL - now;
|
||||
}
|
||||
|
||||
lastdec = now;
|
||||
|
||||
debug("%s() returns %lx\n", __func__, timestamp);
|
||||
|
||||
return timestamp;
|
||||
}
|
||||
|
||||
/*
|
||||
* return difference between timer ticks and base
|
||||
*/
|
||||
ulong get_timer(ulong base)
|
||||
{
|
||||
debug("%s(%lx)\n", __func__, base);
|
||||
return get_timer_masked() - base;
|
||||
}
|
||||
|
||||
void set_timer(ulong t)
|
||||
{
|
||||
debug("%s(%lx)\n", __func__, t);
|
||||
timestamp = t;
|
||||
}
|
||||
|
||||
/* delay x useconds AND preserve advance timestamp value */
|
||||
void __udelay(unsigned long usec)
|
||||
{
|
||||
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
|
||||
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
|
||||
#else
|
||||
long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
|
||||
#endif
|
||||
unsigned long now, last = readl(&tmr->timer3_counter);
|
||||
|
||||
debug("%s(%lu)\n", __func__, usec);
|
||||
while (tmo > 0) {
|
||||
now = readl(&tmr->timer3_counter);
|
||||
if (now > last) /* count down timer overflow */
|
||||
tmo -= TIMER_LOAD_VAL + last - now;
|
||||
else
|
||||
tmo -= last - now;
|
||||
last = now;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* This function is derived from PowerPC code (read timebase as long long).
|
||||
* On ARM it just returns the timer value.
|
||||
*/
|
||||
unsigned long long get_ticks(void)
|
||||
{
|
||||
debug("%s()\n", __func__);
|
||||
return get_timer(0);
|
||||
}
|
||||
|
||||
/*
|
||||
* This function is derived from PowerPC code (timebase clock frequency).
|
||||
* On ARM it returns the number of timer ticks per second.
|
||||
*/
|
||||
ulong get_tbclk(void)
|
||||
{
|
||||
debug("%s()\n", __func__);
|
||||
#ifdef CONFIG_FTTMR010_EXT_CLK
|
||||
return CONFIG_SYS_HZ;
|
||||
#else
|
||||
return CONFIG_SYS_CLK_FREQ;
|
||||
#endif
|
||||
}
|
||||
|
|
@ -1,33 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <asm/arch-ag102/ag102.h>
|
||||
#include <linux/linkage.h>
|
||||
|
||||
.text
|
||||
|
||||
#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
|
||||
ENTRY(turnoff_watchdog)
|
||||
|
||||
#define WD_CR 0xC
|
||||
#define WD_ENABLE 0x1
|
||||
|
||||
! Turn off the watchdog, according to Faraday FTWDT010 spec
|
||||
li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR
|
||||
lwi $p1, [$p0] ! Get the config of WD
|
||||
andi $p1, $p1, 0x1f ! Wipe out useless bits
|
||||
li $r0, ~WD_ENABLE
|
||||
and $p1, $p1, $r0 ! Set WD disable
|
||||
sw $p1, [$p0] ! Write back to WD CR
|
||||
|
||||
! Disable Interrupts by clear GIE in $PSW reg
|
||||
setgie.d
|
||||
|
||||
ret
|
||||
|
||||
ENDPROC(turnoff_watchdog)
|
||||
#endif
|
||||
|
|
@ -12,20 +12,6 @@ extern unsigned int __machine_arch_type;
|
|||
#endif
|
||||
|
||||
/* see arch/arm/kernel/arch.c for a description of these */
|
||||
#define MACH_TYPE_ADPAG101 0
|
||||
|
||||
#ifdef CONFIG_ARCH_ADPAG101
|
||||
# ifdef machine_arch_type
|
||||
# undef machine_arch_type
|
||||
# define machine_arch_type __machine_arch_type
|
||||
# else
|
||||
# define machine_arch_type MACH_TYPE_ADPAG101
|
||||
# endif
|
||||
# define machine_is_adpag101() (machine_arch_type == MACH_TYPE_ADPAG101)
|
||||
#else
|
||||
# define machine_is_adpag101() (0)
|
||||
#endif
|
||||
|
||||
#define MACH_TYPE_ADPAG101P 1
|
||||
|
||||
#ifdef CONFIG_ARCH_ADPAG101P
|
||||
|
|
@ -40,18 +26,4 @@ extern unsigned int __machine_arch_type;
|
|||
# define machine_is_adpag101p() (1)
|
||||
#endif
|
||||
|
||||
#define MACH_TYPE_ADPAG102 2
|
||||
|
||||
#ifdef CONFIG_ARCH_ADPAG102
|
||||
# ifdef machine_arch_type
|
||||
# undef machine_arch_type
|
||||
# define machine_arch_type __machine_arch_type
|
||||
# else
|
||||
# define machine_arch_type MACH_TYPE_ADPAG102
|
||||
# endif
|
||||
# define machine_is_adpag102() (machine_arch_type == MACH_TYPE_ADPAG102)
|
||||
#else
|
||||
# define machine_is_adpag102() (2)
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_NDS32_MACH_TYPE_H */
|
||||
|
|
|
|||
|
|
@ -1,18 +0,0 @@
|
|||
if TARGET_ADP_AG101
|
||||
|
||||
config SYS_CPU
|
||||
default "n1213"
|
||||
|
||||
config SYS_BOARD
|
||||
default "adp-ag101"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "AndesTech"
|
||||
|
||||
config SYS_SOC
|
||||
default "ag101"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "adp-ag101"
|
||||
|
||||
endif
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
ADP-AG101 BOARD
|
||||
M: Andes <uboot@andestech.com>
|
||||
S: Maintained
|
||||
F: board/AndesTech/adp-ag101/
|
||||
F: include/configs/adp-ag101.h
|
||||
F: configs/adp-ag101_defconfig
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
#
|
||||
# Copyright (C) 2011 Andes Technology Corporation
|
||||
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := adp-ag101.o
|
||||
|
|
@ -1,74 +0,0 @@
|
|||
Andes Technology SoC AG101
|
||||
==========================
|
||||
|
||||
AG101 is the first SoC produced by Andes Technology using N1213 CPU core.
|
||||
AG101 has integrated both AHB and APB bus and many periphals for application
|
||||
and product development.
|
||||
|
||||
ADP-AG101
|
||||
=========
|
||||
|
||||
ADP-AG101 is the SoC with AG101 hardcore CPU.
|
||||
|
||||
Please check http://www.andestech.com/p2-4.htm for detail of this SoC.
|
||||
|
||||
Configurations
|
||||
==============
|
||||
|
||||
CONFIG_MEM_REMAP:
|
||||
Doing memory remap is essential for preparing some non-OS or RTOS
|
||||
applications.
|
||||
|
||||
This is also a must on ADP-AG101 board.
|
||||
(While other boards may not have this problem).
|
||||
|
||||
The reason is because the ROM/FLASH circuit on PCB board.
|
||||
AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
|
||||
ROM/FLASH is used to boot.
|
||||
|
||||
When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
|
||||
and the FLASH is connected to BANK1.
|
||||
When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
|
||||
and the FLASH is connected to BANK0.
|
||||
It will occur problem when doing flash probing if the flash is at
|
||||
BANK0 (0x00000000) while memory remapping was skipped.
|
||||
|
||||
Other board like ADP-AG101P may not enable this since there is only
|
||||
a FLASH connected to bank0.
|
||||
|
||||
CONFIG_SKIP_LOWLEVEL_INIT:
|
||||
If you want to boot this system from FLASH and bypass e-bios (the
|
||||
other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
|
||||
in "include/configs/adp-ag101.h".
|
||||
|
||||
Build and boot steps
|
||||
====================
|
||||
|
||||
build:
|
||||
1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
|
||||
2. Use `make adp-ag101` in u-boot root to build the image.
|
||||
|
||||
burn u-boot to flash:
|
||||
1. Make sure the MA17 (J16) is Lo.
|
||||
2. Make sure the dip switch SW5 is set to "0101".
|
||||
3. Power On. Press button "S1", then press button "SW1", then you will found the
|
||||
debug LED show 67 means the system successfully booted into e-bios.
|
||||
Now you can control the e-bios boot loader from your console.
|
||||
4. Under "Command>>" prompt, enter "97" (CopyImageFromCard)
|
||||
5. Under "Type Dir Name of [CF/SD] =>" promtp, enter "c".
|
||||
6. Under "Enter Filename =>" prompt, enter the file name of u-boot image you
|
||||
just build. It is usually "u-boot.bin".
|
||||
7. Under "Enter Dest. Address =>" prompt, enter the memory address where you
|
||||
want to put the binary from SD card to RAM.
|
||||
Address "0x500000" is our suggestion.
|
||||
8. Under "Command>>" prompt again, enter "55" (CLI) to use interactive command
|
||||
environment.
|
||||
9. Under "CLI>" prompt, enter "burn 0x500000 0x80400000 0x30000" to burn the
|
||||
binary from RAM to FLASH.
|
||||
10. Under "CLI>" prompt, enter "exit" to finish the burn process.
|
||||
|
||||
boot u-boot from flash:
|
||||
1. Make sure the MA17 (J16) is Hi).
|
||||
2. Make sure the dip switch SW5 is set to "1010".
|
||||
3. Power On. Press button "S1", then you will see the debug LED count to 20.
|
||||
4. Now you can use u-boot on ADP-AG101 board.
|
||||
|
|
@ -1,82 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <faraday/ftsdc010.h>
|
||||
#include <faraday/ftsmc020.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/*
|
||||
* Miscellaneous platform dependent initializations
|
||||
*/
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/*
|
||||
* refer to BOOT_PARAMETER_PA_BASE within
|
||||
* "linux/arch/nds32/include/asm/misc_spec.h"
|
||||
*/
|
||||
gd->bd->bi_arch_number = MACH_TYPE_ADPAG101;
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
|
||||
|
||||
ftsmc020_init(); /* initialize Flash */
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
unsigned long sdram_base = PHYS_SDRAM_0;
|
||||
unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
|
||||
unsigned long actual_size;
|
||||
|
||||
actual_size = get_ram_size((void *)sdram_base, expected_size);
|
||||
|
||||
gd->ram_size = actual_size;
|
||||
|
||||
if (expected_size != actual_size) {
|
||||
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
|
||||
actual_size >> 20, expected_size >> 20);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void dram_init_banksize(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
|
||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
|
||||
gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
|
||||
gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bd)
|
||||
{
|
||||
return ftmac100_initialize(bd);
|
||||
}
|
||||
|
||||
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
|
||||
{
|
||||
if (banknum == 0) { /* non-CFI boot flash */
|
||||
info->portwidth = FLASH_CFI_8BIT;
|
||||
info->chipwidth = FLASH_CFI_BY8;
|
||||
info->interface = FLASH_CFI_X8;
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
ftsdc010_mmc_init(0);
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
if TARGET_ADP_AG102
|
||||
|
||||
config SYS_CPU
|
||||
default "n1213"
|
||||
|
||||
config SYS_BOARD
|
||||
default "adp-ag102"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "AndesTech"
|
||||
|
||||
config SYS_SOC
|
||||
default "ag102"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "adp-ag102"
|
||||
|
||||
endif
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
ADP-AG102 BOARD
|
||||
M: Andes <uboot@andestech.com>
|
||||
S: Maintained
|
||||
F: board/AndesTech/adp-ag102/
|
||||
F: include/configs/adp-ag102.h
|
||||
F: configs/adp-ag102_defconfig
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
#
|
||||
# Copyright (C) 2011 Andes Technology Corporation
|
||||
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := adp-ag102.o
|
||||
|
|
@ -1,91 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <faraday/ftpci100.h>
|
||||
#include <faraday/ftsdc010.h>
|
||||
#ifdef CONFIG_FTSMC020
|
||||
#include <faraday/ftsmc020.h>
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/*
|
||||
* Miscellaneous platform dependent initializations
|
||||
*/
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/*
|
||||
* refer to BOOT_PARAMETER_PA_BASE within
|
||||
* "linux/arch/nds32/include/asm/misc_spec.h"
|
||||
*/
|
||||
gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
|
||||
|
||||
#if !defined(CONFIG_SYS_NO_FLASH)
|
||||
ftsmc020_init(); /* initialize Flash */
|
||||
#endif /* CONFIG_SYS_NO_FLASH */
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
unsigned long sdram_base = PHYS_SDRAM_0;
|
||||
unsigned long expected_size = PHYS_SDRAM_0_SIZE;
|
||||
unsigned long actual_size;
|
||||
|
||||
actual_size = get_ram_size((void *)sdram_base, expected_size);
|
||||
|
||||
gd->ram_size = actual_size;
|
||||
|
||||
if (expected_size != actual_size) {
|
||||
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
|
||||
actual_size >> 20, expected_size >> 20);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bd)
|
||||
{
|
||||
return ftgmac100_initialize(bd);
|
||||
}
|
||||
|
||||
#if !defined(CONFIG_SYS_NO_FLASH)
|
||||
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
|
||||
{
|
||||
if (banknum == 0) { /* non-CFI boot flash */
|
||||
info->portwidth = FLASH_CFI_8BIT;
|
||||
info->chipwidth = FLASH_CFI_BY8;
|
||||
info->interface = FLASH_CFI_X8;
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
#endif /* CONFIG_SYS_NO_FLASH */
|
||||
|
||||
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
|
||||
void pci_init_board(void)
|
||||
{
|
||||
/* should be pci_ftpci100_init() */
|
||||
pci_ftpci_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_GENERIC_MMC
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
ftsdc010_mmc_init(0);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
CONFIG_NDS32=y
|
||||
CONFIG_TARGET_ADP_AG101=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_SYS_PROMPT="NDS32 # "
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
CONFIG_NDS32=y
|
||||
CONFIG_TARGET_ADP_AG102=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_SYS_PROMPT="NDS32 # "
|
||||
|
|
@ -1,36 +0,0 @@
|
|||
Andes Technology SoC AG102
|
||||
==========================
|
||||
|
||||
AG102 is the second SoC produced by Andes Technology using N1213 CPU core
|
||||
with FPU and DDR contoller support.
|
||||
AG102 has integrated both AHB and APB bus and many periphals for application
|
||||
and product development.
|
||||
|
||||
ADP-AG102
|
||||
=========
|
||||
|
||||
ADP-AG102 is the SoC with AG102 hardcore CPU.
|
||||
|
||||
Configurations
|
||||
==============
|
||||
|
||||
CONFIG_MEM_REMAP:
|
||||
Doing memory remap is essential for preparing some non-OS or RTOS
|
||||
applications.
|
||||
|
||||
CONFIG_SKIP_LOWLEVEL_INIT:
|
||||
If you want to boot this system from SPI ROM and bypass e-bios (the
|
||||
other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
|
||||
in "include/configs/adp-ag102.h".
|
||||
|
||||
Build and boot steps
|
||||
====================
|
||||
|
||||
build:
|
||||
1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
|
||||
2. Use `make adp-ag102` in u-boot root to build the image.
|
||||
|
||||
Burn u-boot to SPI ROM:
|
||||
====================
|
||||
|
||||
This section will be added later.
|
||||
|
|
@ -1,384 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/arch-ag101/ag101.h>
|
||||
|
||||
/*
|
||||
* CPU and Board Configuration Options
|
||||
*/
|
||||
#define CONFIG_ADP_AG101
|
||||
|
||||
#define CONFIG_USE_INTERRUPT
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
/*
|
||||
* Definitions related to passing arguments to kernel.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
|
||||
#define CONFIG_INITRD_TAG /* send initrd params */
|
||||
|
||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_MEM_REMAP
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_SYS_TEXT_BASE 0x03200000
|
||||
#else
|
||||
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Timer
|
||||
*/
|
||||
#define CONFIG_SYS_CLK_FREQ 48000000
|
||||
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
|
||||
|
||||
/*
|
||||
* Use Externel CLOCK or PCLK
|
||||
*/
|
||||
#undef CONFIG_FTRTC010_EXTCLK
|
||||
|
||||
#ifndef CONFIG_FTRTC010_EXTCLK
|
||||
#define CONFIG_FTRTC010_PCLK
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FTRTC010_EXTCLK
|
||||
#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
|
||||
#else
|
||||
#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
|
||||
#endif
|
||||
|
||||
#define TIMER_LOAD_VAL 0xffffffff
|
||||
|
||||
/*
|
||||
* Real Time Clock
|
||||
*/
|
||||
#define CONFIG_RTC_FTRTC010
|
||||
|
||||
/*
|
||||
* Real Time Clock Divider
|
||||
* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
||||
*/
|
||||
#define OSC_5MHZ (5*1000000)
|
||||
#define OSC_CLK (2*OSC_5MHZ)
|
||||
#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
|
||||
/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
|
||||
#define CONFIG_BAUDRATE 38400
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
||||
#define CONFIG_SYS_NS16550_CLK ((46080000 * 20) / 25) /* AG101 */
|
||||
|
||||
/*
|
||||
* Ethernet
|
||||
*/
|
||||
#define CONFIG_FTMAC100
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* SD (MMC) controller
|
||||
*/
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_FTSDC010
|
||||
#define CONFIG_FTSDC010_NUMBER 1
|
||||
#define CONFIG_FTSDC010_SDIO
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_EXT2
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_PING
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
|
||||
#define CONFIG_SYS_MALLOC_LEN (512 << 10)
|
||||
|
||||
/*
|
||||
* AHB Controller configuration
|
||||
*/
|
||||
#define CONFIG_FTAHBC020S
|
||||
|
||||
#ifdef CONFIG_FTAHBC020S
|
||||
#include <faraday/ftahbc020s.h>
|
||||
|
||||
/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
|
||||
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
|
||||
|
||||
/*
|
||||
* CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
|
||||
* hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
|
||||
* in C language.
|
||||
*/
|
||||
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
|
||||
(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
|
||||
FTAHBC020S_SLAVE_BSR_SIZE(0xb))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Watchdog
|
||||
*/
|
||||
#define CONFIG_FTWDT010_WATCHDOG
|
||||
|
||||
/*
|
||||
* PMU Power controller configuration
|
||||
*/
|
||||
#define CONFIG_PMU
|
||||
#define CONFIG_FTPMU010_POWER
|
||||
|
||||
#ifdef CONFIG_FTPMU010_POWER
|
||||
#include <faraday/ftpmu010.h>
|
||||
#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
|
||||
#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \
|
||||
FTPMU010_SDRAMHTC_EBIDATA_DCSR | \
|
||||
FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \
|
||||
FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
|
||||
FTPMU010_SDRAMHTC_CKE_DCSR | \
|
||||
FTPMU010_SDRAMHTC_DQM_DCSR | \
|
||||
FTPMU010_SDRAMHTC_SDCLK_DCSR)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SDRAM controller configuration
|
||||
*/
|
||||
#define CONFIG_FTSDMC021
|
||||
|
||||
#ifdef CONFIG_FTSDMC021
|
||||
#include <faraday/ftsdmc021.h>
|
||||
|
||||
#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRP(1) | \
|
||||
FTSDMC021_TP1_TRCD(1) | \
|
||||
FTSDMC021_TP1_TRF(3) | \
|
||||
FTSDMC021_TP1_TWR(1) | \
|
||||
FTSDMC021_TP1_TCL(2))
|
||||
|
||||
#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \
|
||||
FTSDMC021_TP2_INI_REFT(8) | \
|
||||
FTSDMC021_TP2_REF_INTV(0x180))
|
||||
|
||||
/*
|
||||
* CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
|
||||
* hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
|
||||
* C language.
|
||||
*/
|
||||
#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \
|
||||
FTSDMC021_CR1_DSZ(3) | \
|
||||
FTSDMC021_CR1_MBW(2) | \
|
||||
FTSDMC021_CR1_BNKSIZE(6))
|
||||
|
||||
#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \
|
||||
FTSDMC021_CR2_IREF | \
|
||||
FTSDMC021_CR2_ISMR)
|
||||
|
||||
#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
|
||||
#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
|
||||
CONFIG_SYS_FTSDMC021_BANK0_BASE)
|
||||
|
||||
#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
|
||||
(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
|
||||
#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
|
||||
CONFIG_SYS_FTSDMC021_BANK1_BASE)
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
|
||||
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
|
||||
#if defined(CONFIG_MEM_REMAP)
|
||||
#define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/
|
||||
#endif
|
||||
#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
|
||||
#define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */
|
||||
#endif
|
||||
#define PHYS_SDRAM_1 \
|
||||
(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
|
||||
#define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */
|
||||
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
|
||||
|
||||
#ifdef CONFIG_MEM_REMAP
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#else
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#endif /* CONFIG_MEM_REMAP */
|
||||
|
||||
/*
|
||||
* Load address and memory test area should agree with
|
||||
* arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
|
||||
*/
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x300000
|
||||
|
||||
/* memtest works on 63 MB in DRAM */
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
|
||||
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
|
||||
|
||||
/*
|
||||
* Static memory controller configuration
|
||||
*/
|
||||
#define CONFIG_FTSMC020
|
||||
|
||||
#ifdef CONFIG_FTSMC020
|
||||
#include <faraday/ftsmc020.h>
|
||||
|
||||
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_SYS_FTSMC020_CONFIGS { \
|
||||
{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
|
||||
{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
|
||||
}
|
||||
#else
|
||||
#define CONFIG_SYS_FTSMC020_CONFIGS { \
|
||||
{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* There are 2 bank connected to FTSMC020 on ADP-AG101.
|
||||
* You can use jumper and switch to force it booted from ROM or FLASH.
|
||||
* MA17: Lo, SW5 = "0101": BANK0: ROM, BANK1: FLASH.
|
||||
* MA17: Hi, SW5 = "1010": BANK0: FLASH; ROM is disabled.
|
||||
*/
|
||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
|
||||
#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
|
||||
FTSMC020_BANK_SIZE_32M | \
|
||||
FTSMC020_BANK_MBW_32)
|
||||
|
||||
#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
|
||||
FTSMC020_TPR_AST(1) | \
|
||||
FTSMC020_TPR_CTW(1) | \
|
||||
FTSMC020_TPR_ATI(1) | \
|
||||
FTSMC020_TPR_AT2(1) | \
|
||||
FTSMC020_TPR_WTC(1) | \
|
||||
FTSMC020_TPR_AHT(1) | \
|
||||
FTSMC020_TPR_TRNA(1))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This FTSMC020_BANK0_CONFIG indecates the setting of BANK0.
|
||||
* 1. When CONFIG_SKIP_LOWLEVEL_INIT is enabled, BANK0 is EEPROM,
|
||||
* Do NOT enable BANK0 in FTSMC020_BANK0_CONFIG under this condition.
|
||||
* 2. When CONFIG_SKIP_LOWLEVEL_INIT is undefined, BANK0 is FLASH.
|
||||
*/
|
||||
#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_SIZE_32M | \
|
||||
FTSMC020_BANK_MBW_32)
|
||||
|
||||
#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \
|
||||
FTSMC020_TPR_AST(3) | \
|
||||
FTSMC020_TPR_CTW(3) | \
|
||||
FTSMC020_TPR_ATI(0xf) | \
|
||||
FTSMC020_TPR_AT2(3) | \
|
||||
FTSMC020_TPR_WTC(3) | \
|
||||
FTSMC020_TPR_AHT(3) | \
|
||||
FTSMC020_TPR_TRNA(0xf))
|
||||
|
||||
#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \
|
||||
FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
|
||||
FTSMC020_BANK_SIZE_32M | \
|
||||
FTSMC020_BANK_MBW_32)
|
||||
|
||||
#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_RBE | \
|
||||
FTSMC020_TPR_AST(1) | \
|
||||
FTSMC020_TPR_CTW(1) | \
|
||||
FTSMC020_TPR_ATI(1) | \
|
||||
FTSMC020_TPR_AT2(1) | \
|
||||
FTSMC020_TPR_WTC(1) | \
|
||||
FTSMC020_TPR_AHT(1) | \
|
||||
FTSMC020_TPR_TRNA(1))
|
||||
#endif /* CONFIG_FTSMC020 */
|
||||
|
||||
/*
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
/* use CFI framework */
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
|
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
|
||||
/* support JEDEC */
|
||||
|
||||
/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
|
||||
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define PHYS_FLASH_1 0x80400000 /* BANK 1 */
|
||||
#else /* !CONFIG_SKIP_LOWLEVEL_INIT */
|
||||
#ifdef CONFIG_MEM_REMAP
|
||||
#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
|
||||
#else
|
||||
#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
|
||||
#endif /* CONFIG_MEM_REMAP */
|
||||
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
|
||||
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
|
||||
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
|
||||
|
||||
/* max number of memory banks */
|
||||
/*
|
||||
* There are 4 banks supported for this Controller,
|
||||
* but we have only 1 bank connected to flash on board
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
|
||||
/* max number of sectors on one chip */
|
||||
#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2)
|
||||
#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
||||
|
||||
/* environments */
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
|
||||
#define CONFIG_ENV_SIZE 8192
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
@ -1,334 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Andes Technology Corporation
|
||||
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/arch-ag102/ag102.h>
|
||||
|
||||
/*
|
||||
* CPU and Board Configuration Options
|
||||
*/
|
||||
#define CONFIG_ADP_AG102
|
||||
|
||||
#define CONFIG_USE_INTERRUPT
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_MEM_REMAP
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_SYS_TEXT_BASE 0x04200000
|
||||
#else
|
||||
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Timer
|
||||
*/
|
||||
#define CONFIG_SYS_CLK_FREQ (66000000 * 2)
|
||||
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
|
||||
|
||||
/*
|
||||
* Use Externel CLOCK or PCLK
|
||||
*/
|
||||
#undef CONFIG_FTRTC010_EXTCLK
|
||||
|
||||
#ifndef CONFIG_FTRTC010_EXTCLK
|
||||
#define CONFIG_FTRTC010_PCLK
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FTRTC010_EXTCLK
|
||||
#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
|
||||
#else
|
||||
#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
|
||||
#endif
|
||||
|
||||
#define TIMER_LOAD_VAL 0xffffffff
|
||||
|
||||
/*
|
||||
* Real Time Clock
|
||||
*/
|
||||
#define CONFIG_RTC_FTRTC010
|
||||
|
||||
/*
|
||||
* Real Time Clock Divider
|
||||
* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
||||
*/
|
||||
#define OSC_5MHZ (5*1000000)
|
||||
#define OSC_CLK (2*OSC_5MHZ)
|
||||
#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
|
||||
/* FTUART is a high speed NS 16C550A compatible UART */
|
||||
#define CONFIG_BAUDRATE 38400
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
||||
#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */
|
||||
|
||||
/*
|
||||
* Ethernet
|
||||
*/
|
||||
#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */
|
||||
#define CONFIG_SYS_DISCOVER_PHY
|
||||
#define CONFIG_FTGMAC100
|
||||
#define CONFIG_FTGMAC100_EGIGA
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* SD (MMC) controller
|
||||
*/
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_FTSDC010
|
||||
#define CONFIG_FTSDC010_NUMBER 1
|
||||
#define CONFIG_FTSDC010_SDIO
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_EXT2
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_IDE
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_ELF
|
||||
|
||||
|
||||
/*
|
||||
* PCI
|
||||
*/
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_FTPCI100
|
||||
#define CONFIG_PCI_INDIRECT_BRIDGE
|
||||
#define CONFIG_FTPCI100_MEM_BASE 0xa0000000
|
||||
#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */
|
||||
#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */
|
||||
#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50
|
||||
|
||||
#define CONFIG_PCI_MEM_BUS 0xa0000000
|
||||
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
||||
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */
|
||||
|
||||
#define CONFIG_PCI_IO_BUS 0x90000000
|
||||
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
||||
#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
|
||||
#if defined(CONFIG_FTPCI100)
|
||||
#define __io /* enable outl & inl */
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_PCI_EHCI_DEVICE 0
|
||||
#define CONFIG_USB_EHCI_PCI
|
||||
#define CONFIG_PREBOOT "usb start;"
|
||||
#endif /* #if defiend(CONFIG_FTPCI100) */
|
||||
#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */
|
||||
|
||||
/*
|
||||
* IDE/ATA stuff
|
||||
*/
|
||||
#define __io
|
||||
#define CONFIG_IDE_AHB
|
||||
#define CONFIG_IDE_FTIDE020
|
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
||||
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
||||
#define CONFIG_IDE_PREINIT 1 /* preinit for ide */
|
||||
|
||||
/* max: 2 IDE busses */
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */
|
||||
/* max: 2 drives per IDE bus */
|
||||
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */
|
||||
|
||||
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
||||
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000
|
||||
|
||||
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */
|
||||
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */
|
||||
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */
|
||||
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
||||
|
||||
/*
|
||||
* AHB Controller configuration
|
||||
*/
|
||||
#define CONFIG_FTAHBC020S
|
||||
|
||||
#ifdef CONFIG_FTAHBC020S
|
||||
#include <faraday/ftahbc020s.h>
|
||||
|
||||
/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
|
||||
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
|
||||
|
||||
/*
|
||||
* CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
|
||||
* hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
|
||||
* in C language.
|
||||
*/
|
||||
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
|
||||
(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
|
||||
FTAHBC020S_SLAVE_BSR_SIZE(0xb))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Watchdog
|
||||
*/
|
||||
#define CONFIG_FTWDT010_WATCHDOG
|
||||
|
||||
/*
|
||||
* PCU Power Control Unit configuration
|
||||
*/
|
||||
#define CONFIG_ANDES_PCU
|
||||
|
||||
#ifdef CONFIG_ANDES_PCU
|
||||
#include <andestech/andes_pcu.h>
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* DDR DRAM controller configuration
|
||||
*/
|
||||
#define CONFIG_DWCDDR21MCTL
|
||||
|
||||
#ifdef CONFIG_DWCDDR21MCTL
|
||||
#include <synopsys/dwcddr21mctl.h>
|
||||
/* DCR:
|
||||
* 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend
|
||||
* 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk
|
||||
* 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks)
|
||||
* 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank)
|
||||
* 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks)
|
||||
*/
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \
|
||||
DWCDDR21MCTL_CCR_DFTLM(0x4) | \
|
||||
DWCDDR21MCTL_CCR_HOSTEN(0x1))
|
||||
|
||||
/* 0x04: 0x000020d4 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca
|
||||
|
||||
/* 0x08: 0x0000000f */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f
|
||||
|
||||
/* 0x10: 0x00034812 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \
|
||||
DWCDDR21MCTL_DRR_TRFPRD(0x0348))
|
||||
/* 0x24 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0)
|
||||
|
||||
/* 0x4c: 0x00000040 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040
|
||||
|
||||
/* 0x5c: 0x000055CF */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf
|
||||
|
||||
/* 0xa4: 0x00100000 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \
|
||||
DWCDDR21MCTL_DTAR_DTROW(0x0100) | \
|
||||
DWCDDR21MCTL_DTAR_DTCOL(0x0))
|
||||
/* 0x1f0: 0x00000852 */
|
||||
#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \
|
||||
DWCDDR21MCTL_MR_CL(0x5) | \
|
||||
DWCDDR21MCTL_MR_BL(0x2))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
|
||||
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
|
||||
#if defined(CONFIG_MEM_REMAP)
|
||||
#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/
|
||||
#endif
|
||||
#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
|
||||
#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
|
||||
#endif
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
||||
#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
|
||||
|
||||
#ifdef CONFIG_MEM_REMAP
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#else
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#endif /* CONFIG_MEM_REMAP */
|
||||
|
||||
/*
|
||||
* Load address and memory test area should agree with
|
||||
* board/faraday/a320/config.mk
|
||||
* Be careful not to overwrite U-boot itself.
|
||||
*/
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x0CF00000
|
||||
|
||||
/* memtest works on 63 MB in DRAM */
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
|
||||
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
|
||||
|
||||
/*
|
||||
* Static memory controller configuration
|
||||
*/
|
||||
|
||||
/*
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/*
|
||||
* Env Storage Settings
|
||||
*/
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_ENV_SIZE 4096
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in a new issue