arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

While at this enable the DM and TIFS UARTs for programming pinmux
since they are marked reserved by board.dts

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Nishanth Menon 2023-11-14 21:28:57 -06:00 committed by Tom Rini
parent ab9d07b181
commit b1c7fa0bf0
2 changed files with 2 additions and 102 deletions

View file

@ -69,22 +69,14 @@
};
};
&wkup_uart0_pins_default {
bootph-pre-ram;
};
&main_uart1_pins_default {
bootph-pre-ram;
};
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
bootph-pre-ram;
status = "okay";
};
/* Main UART1 is used for TIFS firmware logs */
&main_uart1 {
bootph-pre-ram;
status = "okay";
};
&ospi0 {

View file

@ -8,71 +8,14 @@
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &main_timer0;
};
aliases {
mmc1 = &sdhci1;
};
memory@80000000 {
bootph-all;
};
};
&main_conf {
bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
};
&main_uart0 {
bootph-all;
};
&main_uart0_pins_default {
bootph-all;
};
&sdhci1 {
bootph-all;
};
&main_mmc1_pins_default {
bootph-all;
};
&fss {
bootph-all;
};
&ospi0_pins_default {
bootph-all;
};
&ospi0 {
bootph-all;
flash@0 {
bootph-all;
partitions {
bootph-all;
partition@3fc0000 {
bootph-all;
};
};
};
};
&inta_main_dmss {
bootph-all;
};
&main_bcdma {
reg = <0x00 0x485c0100 0x00 0x100>,
<0x00 0x4c000000 0x00 0x20000>,
@ -100,41 +43,6 @@
bootph-all;
};
&cpsw3g_mdio {
bootph-all;
};
&cpsw3g_phy0 {
bootph-all;
};
&cpsw3g_phy1 {
bootph-all;
};
&main_rgmii1_pins_default {
bootph-all;
};
&main_rgmii2_pins_default {
bootph-all;
};
&phy_gmii_sel {
bootph-all;
};
&cpsw3g {
bootph-all;
ethernet-ports {
bootph-all;
};
};
&cpsw_port1 {
bootph-all;
};
&cpsw_port2 {
status = "disabled";
};