video: bridge: add Solomon SSD2825 DSI/LVDS driver

SSD2825 is an innovative and cost-effective MIPI Bridge Chip solution
targeting high resolution smartphones. It can convert 24bit RGB
interface into 4-lane MIPI-DSI interface to drive extremely high
resolution display modules of up to 800 x 1366, while supporting AMOLED,
a-si LCD or LTPS advanced panel technologies for smartphone applications.

Bridge is wrapped in panel uClass model for wider compatibility.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880 T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This commit is contained in:
Svyatoslav Ryhel 2023-04-25 10:51:43 +03:00 committed by Anatolij Gustschin
parent 0602083706
commit b0268244d3
3 changed files with 528 additions and 0 deletions

View file

@ -33,3 +33,10 @@ config VIDEO_BRIDGE_ANALOGIX_ANX6345
help help
The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD
panel to be connected to an parallel LCD interface. panel to be connected to an parallel LCD interface.
config VIDEO_BRIDGE_SOLOMON_SSD2825
bool "Solomon SSD2825 bridge driver"
depends on PANEL && DM_GPIO
select VIDEO_MIPI_DSI
help
Solomon SSD2824 SPI RGB-DSI bridge driver wrapped into panel uClass.

View file

@ -7,3 +7,4 @@ obj-$(CONFIG_VIDEO_BRIDGE) += video-bridge-uclass.o
obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o
obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o
obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o
obj-$(CONFIG_VIDEO_BRIDGE_SOLOMON_SSD2825) += ssd2825.o

View file

@ -0,0 +1,520 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <log.h>
#include <misc.h>
#include <mipi_display.h>
#include <mipi_dsi.h>
#include <backlight.h>
#include <panel.h>
#include <spi.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <asm/gpio.h>
#define SSD2825_DEVICE_ID_REG 0xB0
#define SSD2825_RGB_INTERFACE_CTRL_REG_1 0xB1
#define SSD2825_RGB_INTERFACE_CTRL_REG_2 0xB2
#define SSD2825_RGB_INTERFACE_CTRL_REG_3 0xB3
#define SSD2825_RGB_INTERFACE_CTRL_REG_4 0xB4
#define SSD2825_RGB_INTERFACE_CTRL_REG_5 0xB5
#define SSD2825_RGB_INTERFACE_CTRL_REG_6 0xB6
#define SSD2825_NON_BURST BIT(2)
#define SSD2825_BURST BIT(3)
#define SSD2825_PCKL_HIGH BIT(13)
#define SSD2825_HSYNC_HIGH BIT(14)
#define SSD2825_VSYNC_HIGH BIT(15)
#define SSD2825_CONFIGURATION_REG 0xB7
#define SSD2825_CONF_REG_HS BIT(0)
#define SSD2825_CONF_REG_CKE BIT(1)
#define SSD2825_CONF_REG_SLP BIT(2)
#define SSD2825_CONF_REG_VEN BIT(3)
#define SSD2825_CONF_REG_HCLK BIT(4)
#define SSD2825_CONF_REG_CSS BIT(5)
#define SSD2825_CONF_REG_DCS BIT(6)
#define SSD2825_CONF_REG_REN BIT(7)
#define SSD2825_CONF_REG_ECD BIT(8)
#define SSD2825_CONF_REG_EOT BIT(9)
#define SSD2825_CONF_REG_LPE BIT(10)
#define SSD2825_VC_CTRL_REG 0xB8
#define SSD2825_PLL_CTRL_REG 0xB9
#define SSD2825_PLL_CONFIGURATION_REG 0xBA
#define SSD2825_CLOCK_CTRL_REG 0xBB
#define SSD2825_PACKET_SIZE_CTRL_REG_1 0xBC
#define SSD2825_PACKET_SIZE_CTRL_REG_2 0xBD
#define SSD2825_PACKET_SIZE_CTRL_REG_3 0xBE
#define SSD2825_PACKET_DROP_REG 0xBF
#define SSD2825_OPERATION_CTRL_REG 0xC0
#define SSD2825_MAX_RETURN_SIZE_REG 0xC1
#define SSD2825_RETURN_DATA_COUNT_REG 0xC2
#define SSD2825_ACK_RESPONSE_REG 0xC3
#define SSD2825_LINE_CTRL_REG 0xC4
#define SSD2825_INTERRUPT_CTRL_REG 0xC5
#define SSD2825_INTERRUPT_STATUS_REG 0xC6
#define SSD2825_ERROR_STATUS_REG 0xC7
#define SSD2825_DATA_FORMAT_REG 0xC8
#define SSD2825_DELAY_ADJ_REG_1 0xC9
#define SSD2825_DELAY_ADJ_REG_2 0xCA
#define SSD2825_DELAY_ADJ_REG_3 0xCB
#define SSD2825_DELAY_ADJ_REG_4 0xCC
#define SSD2825_DELAY_ADJ_REG_5 0xCD
#define SSD2825_DELAY_ADJ_REG_6 0xCE
#define SSD2825_HS_TX_TIMER_REG_1 0xCF
#define SSD2825_HS_TX_TIMER_REG_2 0xD0
#define SSD2825_LP_RX_TIMER_REG_1 0xD1
#define SSD2825_LP_RX_TIMER_REG_2 0xD2
#define SSD2825_TE_STATUS_REG 0xD3
#define SSD2825_SPI_READ_REG 0xD4
#define SSD2825_PLL_LOCK_REG 0xD5
#define SSD2825_TEST_REG 0xD6
#define SSD2825_TE_COUNT_REG 0xD7
#define SSD2825_ANALOG_CTRL_REG_1 0xD8
#define SSD2825_ANALOG_CTRL_REG_2 0xD9
#define SSD2825_ANALOG_CTRL_REG_3 0xDA
#define SSD2825_ANALOG_CTRL_REG_4 0xDB
#define SSD2825_INTERRUPT_OUT_CTRL_REG 0xDC
#define SSD2825_RGB_INTERFACE_CTRL_REG_7 0xDD
#define SSD2825_LANE_CONFIGURATION_REG 0xDE
#define SSD2825_DELAY_ADJ_REG_7 0xDF
#define SSD2825_INPUT_PIN_CTRL_REG_1 0xE0
#define SSD2825_INPUT_PIN_CTRL_REG_2 0xE1
#define SSD2825_BIDIR_PIN_CTRL_REG_1 0xE2
#define SSD2825_BIDIR_PIN_CTRL_REG_2 0xE3
#define SSD2825_BIDIR_PIN_CTRL_REG_3 0xE4
#define SSD2825_BIDIR_PIN_CTRL_REG_4 0xE5
#define SSD2825_BIDIR_PIN_CTRL_REG_5 0xE6
#define SSD2825_BIDIR_PIN_CTRL_REG_6 0xE7
#define SSD2825_BIDIR_PIN_CTRL_REG_7 0xE8
#define SSD2825_CABC_BRIGHTNESS_CTRL_REG_1 0xE9
#define SSD2825_CABC_BRIGHTNESS_CTRL_REG_2 0xEA
#define SSD2825_CABC_BRIGHTNESS_STATUS_REG 0xEB
#define SSD2825_READ_REG 0xFF
#define SSD2825_SPI_READ_REG_RESET 0xFA
#define SSD2825_CMD_MASK 0x00
#define SSD2825_DAT_MASK 0x01
#define SSD2825_CMD_SEND BIT(0)
#define SSD2825_DAT_SEND BIT(1)
#define SSD2825_DSI_SEND BIT(2)
#define SSD2828_LP_CLOCK_DIVIDER(n) (((n) - 1) & 0x3F)
#define SSD2825_LP_MIN_CLK 5000 /* KHz */
#define SSD2825_REF_MIN_CLK 2000 /* KHz */
struct ssd2825_bridge_priv {
struct mipi_dsi_host host;
struct mipi_dsi_device device;
struct udevice *panel;
struct display_timing timing;
struct gpio_desc power_gpio;
struct gpio_desc reset_gpio;
struct clk *tx_clk;
u32 pll_freq_kbps; /* PLL in kbps */
};
static int ssd2825_spi_write(struct udevice *dev, int reg,
const void *buf, int flags)
{
u8 command[2];
if (flags & SSD2825_CMD_SEND) {
command[0] = SSD2825_CMD_MASK;
command[1] = reg;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
}
if (flags & SSD2825_DAT_SEND) {
u16 data = *(u16 *)buf;
u8 cmd1, cmd2;
/* send low byte first and then high byte */
cmd1 = (data & 0x00FF);
cmd2 = (data & 0xFF00) >> 8;
command[0] = SSD2825_DAT_MASK;
command[1] = cmd1;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
command[0] = SSD2825_DAT_MASK;
command[1] = cmd2;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
}
if (flags & SSD2825_DSI_SEND) {
u16 data = *(u16 *)buf;
data &= 0x00FF;
debug("%s: dsi command (0x%x)\n",
__func__, data);
command[0] = SSD2825_DAT_MASK;
command[1] = data;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
}
return 0;
}
static int ssd2825_spi_read(struct udevice *dev, int reg,
void *data, int flags)
{
u8 command[2];
command[0] = SSD2825_CMD_MASK;
command[1] = SSD2825_SPI_READ_REG;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
command[0] = SSD2825_DAT_MASK;
command[1] = SSD2825_SPI_READ_REG_RESET;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
command[0] = SSD2825_DAT_MASK;
command[1] = 0;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
command[0] = SSD2825_CMD_MASK;
command[1] = reg;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
command[0] = SSD2825_CMD_MASK;
command[1] = SSD2825_SPI_READ_REG_RESET;
dm_spi_xfer(dev, 9, &command,
NULL, SPI_XFER_ONCE);
dm_spi_xfer(dev, 16, NULL,
(u8 *)data, SPI_XFER_ONCE);
return 0;
}
static void ssd2825_write_register(struct udevice *dev, u8 reg,
u16 command)
{
ssd2825_spi_write(dev, reg, &command,
SSD2825_CMD_SEND |
SSD2825_DAT_SEND);
}
static void ssd2825_write_dsi(struct udevice *dev, const u8 *command,
int len)
{
int i;
ssd2825_spi_write(dev, SSD2825_PACKET_SIZE_CTRL_REG_1, &len,
SSD2825_CMD_SEND | SSD2825_DAT_SEND);
ssd2825_spi_write(dev, SSD2825_PACKET_DROP_REG, NULL,
SSD2825_CMD_SEND);
for (i = 0; i < len; i++)
ssd2825_spi_write(dev, 0, &command[i], SSD2825_DSI_SEND);
}
static ssize_t ssd2825_bridge_transfer(struct mipi_dsi_host *host,
const struct mipi_dsi_msg *msg)
{
struct udevice *dev = (struct udevice *)host->dev;
u8 buf = *(u8 *)msg->tx_buf;
u16 config;
int ret;
ret = ssd2825_spi_read(dev, SSD2825_CONFIGURATION_REG,
&config, 0);
if (ret)
return ret;
switch (msg->type) {
case MIPI_DSI_DCS_SHORT_WRITE:
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
case MIPI_DSI_DCS_LONG_WRITE:
config |= SSD2825_CONF_REG_DCS;
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
case MIPI_DSI_GENERIC_LONG_WRITE:
config &= ~SSD2825_CONF_REG_DCS;
break;
default:
return 0;
}
ssd2825_write_register(dev, SSD2825_CONFIGURATION_REG, config);
ssd2825_write_register(dev, SSD2825_VC_CTRL_REG, 0x0000);
ssd2825_write_dsi(dev, msg->tx_buf, msg->tx_len);
if (buf == MIPI_DCS_SET_DISPLAY_ON) {
ssd2825_write_register(dev, SSD2825_CONFIGURATION_REG,
SSD2825_CONF_REG_HS | SSD2825_CONF_REG_VEN |
SSD2825_CONF_REG_DCS | SSD2825_CONF_REG_ECD |
SSD2825_CONF_REG_EOT);
ssd2825_write_register(dev, SSD2825_PLL_CTRL_REG, 0x0001);
ssd2825_write_register(dev, SSD2825_VC_CTRL_REG, 0x0000);
}
return 0;
}
static const struct mipi_dsi_host_ops ssd2825_bridge_host_ops = {
.transfer = ssd2825_bridge_transfer,
};
/*
* PLL configuration register settings.
*
* See the "PLL Configuration Register Description" in the SSD2825 datasheet.
*/
static u16 construct_pll_config(struct ssd2825_bridge_priv *priv,
u32 desired_pll_freq_kbps, u32 reference_freq_khz)
{
u32 div_factor = 1, mul_factor, fr = 0;
while (reference_freq_khz / (div_factor + 1) >= SSD2825_REF_MIN_CLK)
div_factor++;
if (div_factor > 31)
div_factor = 31;
mul_factor = DIV_ROUND_UP(desired_pll_freq_kbps * div_factor,
reference_freq_khz);
priv->pll_freq_kbps = reference_freq_khz * mul_factor / div_factor;
if (priv->pll_freq_kbps >= 501000)
fr = 3;
else if (priv->pll_freq_kbps >= 251000)
fr = 2;
else if (priv->pll_freq_kbps >= 126000)
fr = 1;
return (fr << 14) | (div_factor << 8) | mul_factor;
}
static void ssd2825_setup_pll(struct udevice *dev)
{
struct ssd2825_bridge_priv *priv = dev_get_priv(dev);
struct mipi_dsi_device *device = &priv->device;
struct display_timing *dt = &priv->timing;
u16 pll_config, lp_div;
u32 pclk_mult, tx_freq_khz, pd_lines;
tx_freq_khz = clk_get_rate(priv->tx_clk) / 1000;
pd_lines = mipi_dsi_pixel_format_to_bpp(device->format);
pclk_mult = pd_lines / device->lanes + 1;
pll_config = construct_pll_config(priv, pclk_mult *
dt->pixelclock.typ / 1000,
tx_freq_khz);
lp_div = priv->pll_freq_kbps / (SSD2825_LP_MIN_CLK * 8);
/* Disable PLL */
ssd2825_write_register(dev, SSD2825_PLL_CTRL_REG, 0x0000);
ssd2825_write_register(dev, SSD2825_LINE_CTRL_REG, 0x0001);
/* Set delays */
ssd2825_write_register(dev, SSD2825_DELAY_ADJ_REG_1, 0x2103);
/* Set PLL coeficients */
ssd2825_write_register(dev, SSD2825_PLL_CONFIGURATION_REG, pll_config);
/* Clock Control Register */
ssd2825_write_register(dev, SSD2825_CLOCK_CTRL_REG,
SSD2828_LP_CLOCK_DIVIDER(lp_div));
/* Enable PLL */
ssd2825_write_register(dev, SSD2825_PLL_CTRL_REG, 0x0001);
ssd2825_write_register(dev, SSD2825_VC_CTRL_REG, 0x0000);
}
static int ssd2825_bridge_enable_panel(struct udevice *dev)
{
struct ssd2825_bridge_priv *priv = dev_get_priv(dev);
struct mipi_dsi_device *device = &priv->device;
struct display_timing *dt = &priv->timing;
int ret;
ret = clk_prepare_enable(priv->tx_clk);
if (ret) {
log_err("error enabling tx_clk (%d)\n", ret);
return ret;
}
ret = dm_gpio_set_value(&priv->power_gpio, 1);
if (ret) {
log_err("error changing power-gpios (%d)\n", ret);
return ret;
}
mdelay(10);
ret = dm_gpio_set_value(&priv->reset_gpio, 0);
if (ret) {
log_err("error changing reset-gpios (%d)\n", ret);
return ret;
}
mdelay(10);
ret = dm_gpio_set_value(&priv->reset_gpio, 1);
if (ret) {
log_err("error changing reset-gpios (%d)\n", ret);
return ret;
}
mdelay(10);
/* Perform panel HW setup */
ret = panel_enable_backlight(priv->panel);
if (ret)
return ret;
/* Perform SW reset */
ssd2825_write_register(dev, SSD2825_OPERATION_CTRL_REG, 0x0100);
/* Set panel timings */
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_1,
dt->vsync_len.typ << 8 | dt->hsync_len.typ);
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_2,
(dt->vsync_len.typ + dt->vback_porch.typ) << 8 |
(dt->hsync_len.typ + dt->hback_porch.typ));
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_3,
dt->vfront_porch.typ << 8 | dt->hfront_porch.typ);
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_4,
dt->hactive.typ);
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_5,
dt->vactive.typ);
ssd2825_write_register(dev, SSD2825_RGB_INTERFACE_CTRL_REG_6,
SSD2825_HSYNC_HIGH | SSD2825_VSYNC_HIGH |
SSD2825_PCKL_HIGH | SSD2825_NON_BURST |
(3 - device->format));
ssd2825_write_register(dev, SSD2825_LANE_CONFIGURATION_REG,
device->lanes - 1);
ssd2825_write_register(dev, SSD2825_TEST_REG, 0x0004);
/* Call PLL configuration */
ssd2825_setup_pll(dev);
mdelay(10);
/* Initial DSI configuration register set */
ssd2825_write_register(dev, SSD2825_CONFIGURATION_REG,
SSD2825_CONF_REG_CKE | SSD2825_CONF_REG_DCS |
SSD2825_CONF_REG_ECD | SSD2825_CONF_REG_EOT);
ssd2825_write_register(dev, SSD2825_VC_CTRL_REG, 0x0000);
/* Set up SW panel configuration */
ret = panel_set_backlight(priv->panel, BACKLIGHT_DEFAULT);
if (ret)
return ret;
return 0;
}
static int ssd2825_bridge_set_panel(struct udevice *dev, int percent)
{
return 0;
}
static int ssd2825_bridge_panel_timings(struct udevice *dev,
struct display_timing *timing)
{
struct ssd2825_bridge_priv *priv = dev_get_priv(dev);
memcpy(timing, &priv->timing, sizeof(*timing));
return 0;
}
static int ssd2825_bridge_probe(struct udevice *dev)
{
struct ssd2825_bridge_priv *priv = dev_get_priv(dev);
struct spi_slave *slave = dev_get_parent_priv(dev);
struct mipi_dsi_device *device = &priv->device;
struct mipi_dsi_panel_plat *mipi_plat;
int ret;
ret = spi_claim_bus(slave);
if (ret) {
log_err("SPI bus allocation failed (%d)\n", ret);
return ret;
}
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev,
"panel", &priv->panel);
if (ret) {
log_err("cannot get panel: ret=%d\n", ret);
return ret;
}
panel_get_display_timing(priv->panel, &priv->timing);
mipi_plat = dev_get_plat(priv->panel);
mipi_plat->device = device;
priv->host.dev = (struct device *)dev;
priv->host.ops = &ssd2825_bridge_host_ops;
device->host = &priv->host;
device->lanes = mipi_plat->lanes;
device->format = mipi_plat->format;
device->mode_flags = mipi_plat->mode_flags;
/* get panel gpios */
ret = gpio_request_by_name(dev, "power-gpios", 0,
&priv->power_gpio, GPIOD_IS_OUT);
if (ret) {
log_err("could not decode power-gpios (%d)\n", ret);
return ret;
}
ret = gpio_request_by_name(dev, "reset-gpios", 0,
&priv->reset_gpio, GPIOD_IS_OUT);
if (ret) {
log_err("could not decode reset-gpios (%d)\n", ret);
return ret;
}
/* get clk */
priv->tx_clk = devm_clk_get(dev, "tx_clk");
if (IS_ERR(priv->tx_clk)) {
log_err("cannot get tx_clk: %ld\n", PTR_ERR(priv->tx_clk));
return PTR_ERR(priv->tx_clk);
}
return 0;
}
static const struct panel_ops ssd2825_bridge_ops = {
.enable_backlight = ssd2825_bridge_enable_panel,
.set_backlight = ssd2825_bridge_set_panel,
.get_display_timing = ssd2825_bridge_panel_timings,
};
static const struct udevice_id ssd2825_bridge_ids[] = {
{ .compatible = "solomon,ssd2825" },
{ }
};
U_BOOT_DRIVER(ssd2825) = {
.name = "ssd2825",
.id = UCLASS_PANEL,
.of_match = ssd2825_bridge_ids,
.ops = &ssd2825_bridge_ops,
.probe = ssd2825_bridge_probe,
.priv_auto = sizeof(struct ssd2825_bridge_priv),
};