Merge branch 'staging'

arch/x86/cpu/cpu.c

@@ -55,35 +55,70 @@ struct gdt_ptr {
 	u32 ptr;
 } __packed;
 
-static void reload_gdt(void)
+static void load_ds(u32 segment)
+{
+	asm volatile("movl %0, %%ds" : : "r" (segment * X86_GDT_ENTRY_SIZE));
+}
+
+static void load_es(u32 segment)
+{
+	asm volatile("movl %0, %%es" : : "r" (segment * X86_GDT_ENTRY_SIZE));
+}
+
+static void load_fs(u32 segment)
+{
+	asm volatile("movl %0, %%fs" : : "r" (segment * X86_GDT_ENTRY_SIZE));
+}
+
+static void load_gs(u32 segment)
+{
+	asm volatile("movl %0, %%gs" : : "r" (segment * X86_GDT_ENTRY_SIZE));
+}
+
+static void load_ss(u32 segment)
+{
+	asm volatile("movl %0, %%ss" : : "r" (segment * X86_GDT_ENTRY_SIZE));
+}
+
+static void load_gdt(const u64 *boot_gdt, u16 num_entries)
+{
+	struct gdt_ptr gdt;
+
+	gdt.len = (num_entries * 8) - 1;
+	gdt.ptr = (u32)boot_gdt;
+
+	asm volatile("lgdtl %0\n" : : "m" (gdt));
+}
+
+void init_gd(gd_t *id, u64 *gdt_addr)
+{
+	id->gd_addr = (ulong)id;
+	setup_gdt(id, gdt_addr);
+}
+
+void setup_gdt(gd_t *id, u64 *gdt_addr)
 {
-	/*
-	 * There are machines which are known to not boot with the GDT
-	 * being 8-byte unaligned.  Intel recommends 16 byte alignment
-	 */
-	static const u64 boot_gdt[] __attribute__((aligned(16))) = {
 	/* CS: code, read/execute, 4 GB, base 0 */
-		[GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+	gdt_addr[X86_GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff);
+
 	/* DS: data, read/write, 4 GB, base 0 */
-		[GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+	gdt_addr[X86_GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff);
+
+	/* FS: data, read/write, 4 GB, base (Global Data Pointer) */
+	gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093, (ulong)id, 0xfffff);
+
 	/* 16-bit CS: code, read/execute, 64 kB, base 0 */
-		[GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff),
+	gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff);
+
 	/* 16-bit DS: data, read/write, 64 kB, base 0 */
-		[GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff),
+	gdt_addr[X86_GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff);
-	};
-	static struct gdt_ptr gdt;
 
-	gdt.len = sizeof(boot_gdt)-1;
+	load_gdt(gdt_addr, X86_GDT_NUM_ENTRIES);
-	gdt.ptr = (u32)&boot_gdt;
+	load_ds(X86_GDT_ENTRY_32BIT_DS);
-
+	load_es(X86_GDT_ENTRY_32BIT_DS);
-	asm volatile("lgdtl %0\n" \
+	load_gs(X86_GDT_ENTRY_32BIT_DS);
-		     "movl $((2+1)*8), %%ecx\n" \
+	load_ss(X86_GDT_ENTRY_32BIT_DS);
-		     "movl %%ecx, %%ds\n" \
+	load_fs(X86_GDT_ENTRY_32BIT_FS);
-		     "movl %%ecx, %%es\n" \
-		     "movl %%ecx, %%fs\n" \
-		     "movl %%ecx, %%gs\n" \
-		     "movl %%ecx, %%ss" \
-		     : : "m" (gdt) : "ecx");
 }
 
 int x86_cpu_init_f(void)
@@ -104,6 +139,14 @@ int x86_cpu_init_f(void)
 int cpu_init_f(void) __attribute__((weak, alias("x86_cpu_init_f")));
 
 int x86_cpu_init_r(void)
+{
+	/* Initialize core interrupt and exception functionality of CPU */
+	cpu_init_interrupts();
+	return 0;
+}
+int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r")));
+
+void x86_enable_caches(void)
 {
 	const u32 nw_cd_rst = ~(X86_CR0_NW | X86_CR0_CD);
 
@@ -112,14 +155,16 @@ int x86_cpu_init_r(void)
 	    "andl	%0, %%eax\n"
 	    "movl	%%eax, %%cr0\n"
 	    "wbinvd\n" : : "i" (nw_cd_rst) : "eax");
+}
+void enable_caches(void) __attribute__((weak, alias("x86_enable_caches")));
 
-	reload_gdt();
+int x86_init_cache(void)
+{
+	enable_caches();
 
-	/* Initialize core interrupt and exception functionality of CPU */
-	cpu_init_interrupts();
 	return 0;
 }
-int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r")));
+int init_cache(void) __attribute__((weak, alias("x86_init_cache")));
 
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {

arch/x86/cpu/interrupts.c

@@ -174,7 +174,7 @@ struct desc_ptr {
 	unsigned short segment;
 } __packed;
 
-struct idt_entry idt[256] __attribute__((aligned(16)));
+struct idt_entry idt[256] __aligned(16);
 
 struct desc_ptr idt_ptr;
 

arch/x86/cpu/start.S

@@ -29,8 +29,9 @@
 #include <config.h>
 #include <version.h>
 #include <asm/global_data.h>
+#include <asm/processor.h>
 #include <asm/processor-flags.h>
-#include <generated/asm-offsets.h>
+#include <generated/generic-asm-offsets.h>
 
 .section .text
 .code32
@@ -58,7 +59,7 @@ _start:
 	/* This is the 32-bit cold-reset entry point */
 
 	/* Load the segement registes to match the gdt loaded in start16.S */
-	movl	$0x18, %eax
+	movl	$(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
 	movw	%ax, %fs
 	movw	%ax, %ds
 	movw	%ax, %gs
@@ -84,6 +85,12 @@ car_init_ret:
 	 */
 	movl	$CONFIG_SYS_INIT_SP_ADDR, %esp
 
+	/* Initialise the Global Data Pointer */
+	movl	$CONFIG_SYS_INIT_GD_ADDR, %eax
+	movl	%eax, %edx
+	addl	$GENERATED_GBL_DATA_SIZE, %edx
+	call	init_gd;
+
 	/* Set parameter to board_init_f() to boot flags */
 	xorl	%eax, %eax
 	movw	%bx, %ax
@@ -95,32 +102,22 @@ car_init_ret:
 	movw	$0x85, %ax
 	jmp	die
 
-.globl relocate_code
+.globl board_init_f_r_trampoline
-.type relocate_code, @function
+.type board_init_f_r_trampoline, @function
-relocate_code:
+board_init_f_r_trampoline:
 	/*
 	 * SDRAM has been initialised, U-Boot code has been copied into
 	 * RAM, BSS has been cleared and relocation adjustments have been
 	 * made. It is now time to jump into the in-RAM copy of U-Boot
 	 *
-	 * %eax = Address of top of stack
+	 * %eax = Address of top of new stack
-	 * %edx = Address of Global Data
-	 * %ecx = Base address of in-RAM copy of U-Boot
 	 */
 
 	/* Setup stack in RAM */
 	movl	%eax, %esp
 
-	/* Setup call address of in-RAM copy of board_init_r() */
+	/* Re-enter U-Boot by calling board_init_f_r */
-	movl	$board_init_r, %ebp
+	call	board_init_f_r
-	addl	(GENERATED_GD_RELOC_OFF)(%edx), %ebp
-
-	/* Setup parameters to board_init_r() */
-	movl	%edx, %eax
-	movl	%ecx, %edx
-
-	/* Jump to in-RAM copy of board_init_r() */
-	call	*%ebp
 
 die:
 	hlt

arch/x86/cpu/start16.S

@@ -86,7 +86,11 @@ gdt_ptr:
 	.word	0x20		/* limit (32 bytes = 4 GDT entries) */
 	.long	BOOT_SEG + gdt	/* base */
 
-	/* The GDT table ...
+/* Some CPUs are picky about GDT alignment... */
+.align 16
+gdt:
+	/*
+	 * The GDT table ...
 	 *
 	 *	 Selector	Type
 	 *	 0x00		NULL
@@ -94,17 +98,46 @@ gdt_ptr:
 	 *	 0x10		32bit code
 	 *	 0x18		32bit data/stack
 	 */
+	/* The NULL Desciptor - Mandatory */
+	.word	0x0000		/* limit_low */
+	.word	0x0000		/* base_low */
+	.byte	0x00		/* base_middle */
+	.byte	0x00		/* access */
+	.byte	0x00		/* flags + limit_high */
+	.byte	0x00		/* base_high */
 
-gdt:
+	/* Unused Desciptor - (matches Linux) */
-	.word	0, 0, 0, 0	/* NULL  */
+	.word	0x0000		/* limit_low */
-	.word	0, 0, 0, 0	/* unused */
+	.word	0x0000		/* base_low */
+	.byte	0x00		/* base_middle */
+	.byte	0x00		/* access */
+	.byte	0x00		/* flags + limit_high */
+	.byte	0x00		/* base_high */
 
-	.word	0xFFFF		/* 4Gb - (0x100000*0x1000 = 4Gb) */
+	/*
-	.word	0		/* base address = 0 */
+	 * The Code Segment Descriptor:
-	.word	0x9B00		/* code read/exec */
+	 * - Base   = 0x00000000
-	.word	0x00CF		/* granularity = 4096, 386 (+5th nibble of limit) */
+	 * - Size   = 4GB
+	 * - Access = Present, Ring 0, Exec (Code), Readable
+	 * - Flags  = 4kB Granularity, 32-bit
+	 */
+	.word	0xffff		/* limit_low */
+	.word	0x0000		/* base_low */
+	.byte	0x00		/* base_middle */
+	.byte	0x9b		/* access */
+	.byte	0xcf		/* flags + limit_high */
+	.byte	0x00		/* base_high */
 
-	.word	0xFFFF		/* 4Gb - (0x100000*0x1000 = 4Gb) */
+	/*
-	.word	0x0		/* base address = 0 */
+	 * The Data Segment Descriptor:
-	.word	0x9300		/* data read/write */
+	 * - Base   = 0x00000000
-	.word	0x00CF		/* granularity = 4096, 386 (+5th nibble of limit) */
+	 * - Size   = 4GB
+	 * - Access = Present, Ring 0, Non-Exec (Data), Writable
+	 * - Flags  = 4kB Granularity, 32-bit
+	 */
+	.word	0xffff		/* limit_low */
+	.word	0x0000		/* base_low */
+	.byte	0x00		/* base_middle */
+	.byte	0x93		/* access */
+	.byte	0xcf		/* flags + limit_high */
+	.byte	0x00		/* base_high */

arch/x86/include/asm/global_data.h

@@ -36,6 +36,8 @@
 #ifndef __ASSEMBLY__
 
 typedef	struct global_data {
+	/* NOTE: gd_addr MUST be first member of struct global_data! */
+	unsigned long	gd_addr;	/* Location of Global Data */
 	bd_t		*bd;
 	unsigned long	flags;
 	unsigned long	baudrate;
@@ -51,13 +53,24 @@ typedef	struct global_data {
 	unsigned long	bus_clk;
 	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
 	unsigned long	start_addr_sp;	/* start_addr_stackpointer */
+	unsigned long	gdt_addr;	/* Location of GDT */
+	unsigned long	new_gd_addr;	/* New location of Global Data */
 	phys_size_t	ram_size;	/* RAM size */
 	unsigned long	reset_status;	/* reset status register at boot */
 	void		**jt;		/* jump table */
 	char		env_buf[32];	/* buffer for getenv() before reloc. */
 } gd_t;
 
-extern gd_t *gd;
+static inline gd_t *get_fs_gd_ptr(void)
+{
+	gd_t *gd_ptr;
+
+	asm volatile("fs movl 0, %0\n" : "=r" (gd_ptr));
+
+	return gd_ptr;
+}
+
+#define gd	get_fs_gd_ptr()
 
 #endif
 
@@ -73,12 +86,6 @@ extern gd_t *gd;
 #define GD_FLG_DISABLE_CONSOLE	0x00040	/* Disable console (in & out)		*/
 #define GD_FLG_ENV_READY	0x00080	/* Environment imported into hash table	*/
 
-#if 0
 #define DECLARE_GLOBAL_DATA_PTR
-#else
-#define XTRN_DECLARE_GLOBAL_DATA_PTR    extern
-#define DECLARE_GLOBAL_DATA_PTR     XTRN_DECLARE_GLOBAL_DATA_PTR \
-gd_t *gd
-#endif
 
 #endif /* __ASM_GBL_DATA_H */

arch/x86/include/asm/init_helpers.h

@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _INIT_HELPERS_H_
+#define _INIT_HELPERS_H_
+
+int display_banner(void);
+int display_dram_config(void);
+int init_baudrate_f(void);
+int calculate_relocation_address(void);
+
+int copy_gd_to_ram_f_r(void);
+int init_cache_f_r(void);
+
+int set_reloc_flag_r(void);
+int mem_malloc_init_r(void);
+int init_bd_struct_r(void);
+int flash_init_r(void);
+int init_ip_address_r(void);
+int status_led_set_r(void);
+int set_bootfile_r(void);
+int set_load_addr_r(void);
+
+#endif	/* !_INIT_HELPERS_H_ */

arch/x86/include/asm/init_wrappers.h

@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _INIT_WRAPPERS_H_
+#define _INIT_WRAPPERS_H_
+
+int serial_initialize_r(void);
+int env_relocate_r(void);
+int pci_init_r(void);
+int jumptable_init_r(void);
+int pcmcia_init_r(void);
+int kgdb_init_r(void);
+int enable_interrupts_r(void);
+int eth_initialize_r(void);
+int reset_phy_r(void);
+int ide_init_r(void);
+int scsi_init_r(void);
+int doc_init_r(void);
+int bb_miiphy_init_r(void);
+int post_run_r(void);
+
+#endif	/* !_INIT_WRAPPERS_H_ */

arch/x86/include/asm/processor.h

@@ -24,9 +24,25 @@
 #ifndef __ASM_PROCESSOR_H_
 #define __ASM_PROCESSOR_H_ 1
 
-#define GDT_ENTRY_32BIT_CS	2
+#define X86_GDT_ENTRY_SIZE	8
-#define GDT_ENTRY_32BIT_DS	(GDT_ENTRY_32BIT_CS + 1)
+
-#define GDT_ENTRY_16BIT_CS	(GDT_ENTRY_32BIT_DS + 1)
+#ifndef __ASSEMBLY__
-#define GDT_ENTRY_16BIT_DS	(GDT_ENTRY_16BIT_CS + 1)
+
+enum {
+	X86_GDT_ENTRY_NULL = 0,
+	X86_GDT_ENTRY_UNUSED,
+	X86_GDT_ENTRY_32BIT_CS,
+	X86_GDT_ENTRY_32BIT_DS,
+	X86_GDT_ENTRY_32BIT_FS,
+	X86_GDT_ENTRY_16BIT_CS,
+	X86_GDT_ENTRY_16BIT_DS,
+	X86_GDT_NUM_ENTRIES
+};
+#else
+/* NOTE: If the above enum is modified, this define must be checked */
+#define X86_GDT_ENTRY_32BIT_DS	3
+#endif
+
+#define X86_GDT_SIZE		(X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE)
 
 #endif

arch/x86/include/asm/relocate.h

@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _RELOCATE_H_
+#define _RELOCATE_H_
+
+#include <common.h>
+
+int copy_uboot_to_ram(void);
+int clear_bss(void);
+int do_elf_reloc_fixups(void);
+
+#endif	/* !_RELOCATE_H_ */

arch/x86/include/asm/string.h

@@ -14,7 +14,7 @@ extern char * strrchr(const char * s, int c);
 #undef __HAVE_ARCH_STRCHR
 extern char * strchr(const char * s, int c);
 
-#undef __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMCPY
 extern void * memcpy(void *, const void *, __kernel_size_t);
 
 #undef __HAVE_ARCH_MEMMOVE

arch/x86/include/asm/u-boot-x86.h

@@ -37,6 +37,9 @@ int x86_cpu_init_r(void);
 int cpu_init_r(void);
 int x86_cpu_init_f(void);
 int cpu_init_f(void);
+void init_gd(gd_t *id, u64 *gdt_addr);
+void setup_gdt(gd_t *id, u64 *gdt_addr);
+int init_cache(void);
 
 /* cpu/.../timer.c */
 void timer_isr(void *);
@@ -61,5 +64,7 @@ u32 isa_map_rom(u32 bus_addr, int size);
 int video_bios_init(void);
 int video_init(void);
 
+void	board_init_f_r_trampoline(ulong) __attribute__ ((noreturn));
+void	board_init_f_r(void) __attribute__ ((noreturn));
 
 #endif	/* _U_BOOT_I386_H_ */

arch/x86/lib/Makefile

@@ -32,13 +32,17 @@ SOBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode_switch.o
 COBJS-$(CONFIG_SYS_PC_BIOS)	+= bios_setup.o
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
+COBJS-y	+= cmd_boot.o
 COBJS-y	+= gcc.o
+COBJS-y	+= init_helpers.o
+COBJS-y	+= init_wrappers.o
 COBJS-y	+= interrupts.o
 COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
 COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
 COBJS-$(CONFIG_PCI) += pci.o
 COBJS-$(CONFIG_PCI) += pci_type1.o
 COBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode.o
+COBJS-y	+= relocate.o
 COBJS-y	+= string.o
 COBJS-$(CONFIG_SYS_X86_ISR_TIMER)	+= timer.o
 COBJS-$(CONFIG_VIDEO)	+= video_bios.o

arch/x86/lib/bios.S

@@ -246,11 +246,9 @@ rm_int1f:
 rm_def_int:
 	iret
 
-
 	/*
-	 * All interrupt jumptable entries jump to here
+	 * All interrupt jumptable entries jump to here after pushing the
-	 * after pushing the interrupt vector number onto the
+	 * interrupt vector number onto the stack.
-	 * stack.
 	 */
 any_interrupt16:
 	MAKE_BIOS_STACK
@@ -272,7 +270,8 @@ gs	movw	OFFS_VECTOR(%bp), %ax
 	je	Lint_1ah
 	movw	$0xffff, %ax
 	jmp	Lout
-Lint_10h:					/* VGA BIOS services */
+Lint_10h:
+	/* VGA BIOS services */
 	call	bios_10h
 	jmp	Lout
 Lint_11h:
@@ -281,35 +280,42 @@ Lint_11h:
 Lint_12h:
 	call	bios_12h
 	jmp	Lout
-Lint_13h:					/* BIOS disk services */
+Lint_13h:
+	/* BIOS disk services */
 	call	bios_13h
 	jmp	Lout
-Lint_15h:					/* Misc. BIOS services */
+Lint_15h:
+	/* Misc. BIOS services */
 	call	bios_15h
 	jmp	Lout
-Lint_16h:					/* keyboard services */
+Lint_16h:
+	/* keyboard services */
 	call	bios_16h
 	jmp	Lout
-Lint_1ah:					/* PCI bios */
+Lint_1ah:
+	/* PCI bios */
 	call	bios_1ah
 	jmp	Lout
 Lout:
 	cmpw	$0, %ax
 	je	Lhandeled
 
-	/* Insert code for unhandeled INTs here.
+	/*
+	 * Insert code for unhandeled INTs here.
 	 *
-	 * ROLO prints a message to the console
+	 * ROLO prints a message to the console we could do that but then
-	 * (we could do that but then we're in 16bit mode
+	 * we're in 16bit mode so we'll have to get back into 32bit mode
-	 * so we'll have to get back into 32bit mode
+	 * to use the console I/O routines (if we do this we should make
-	 * to use the console I/O routines (if we do this
+	 * int 0x10 and int 0x16 work as well)
-	 * we shuls make int 0x10 and int 0x16 work as well))
 	 */
 Lhandeled:
 	RESTORE_CALLERS_STACK
-	addw	$2,%sp				/* dump vector number */
-	iret					/* return from interrupt */
 
+	/* dump vector number */
+	addw	$2,%sp
+
+	/* return from interrupt */
+	iret
 
 /*
  ************************************************************
@@ -327,22 +333,24 @@ gs	movw	OFFS_AX(%bp), %ax
 	je	Lvid_cfg
 	movw	$0xffff, %ax
 	ret
-Lcur_pos:					/* Read Cursor Position and Size */
+Lcur_pos:
+	/* Read Cursor Position and Size */
 gs	movw	$0, OFFS_CX(%bp)
 gs	movw	$0, OFFS_DX(%bp)
 	xorw	%ax, %ax
 	ret
-Lvid_state:					/* Get Video State */
+Lvid_state:
-gs	movw	$(80 << 8|0x03), OFFS_AX(%bp)	/* 80 columns, 80x25, 16 colors */
+	/* Get Video State - 80 columns, 80x25, 16 colors */
+gs	movw	$(80 << 8|0x03), OFFS_AX(%bp)
 gs	movw	$0, OFFS_BX(%bp)
 	xorw	%ax, %ax
 	ret
-Lvid_cfg:	/* Video Subsystem Configuration (EGA/VGA) */
+Lvid_cfg:
-gs	movw	$0x10, OFFS_BX(%bp)		/* indicate CGA/MDA/HGA */
+	/* Video Subsystem Configuration (EGA/VGA) - indicate CGA/MDA/HGA */
+gs	movw	$0x10, OFFS_BX(%bp)
 	xorw	%ax, %ax
 	ret
 
-
 /*
  ************************************************************
  * BIOS interrupt 11h -- Equipment determination
@@ -355,7 +363,6 @@ gs	movw	%ax, OFFS_AX(%bp)
 	xorw	%ax, %ax
 	ret
 
-
 /*
  ************************************************************
  * BIOS	interrupt 12h -- Get Memory Size
@@ -370,16 +377,18 @@ cs	movw	ram_in_64kb_chunks, %ax
 b12_more_than_640k:
 	movw	$0x280, %ax
 b12_return:
-gs	movw	%ax, OFFS_AX(%bp)		/* return number of kilobytes in ax */
+	/* return number of kilobytes in ax */
+gs	movw	%ax, OFFS_AX(%bp)
 
 gs	movw	OFFS_FLAGS(%bp), %ax
-	andw	$0xfffe, %ax			/* clear carry -- function succeeded */
+
+	/* clear carry -- function succeeded */
+	andw	$0xfffe, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 
 	xorw	%ax, %ax
 	ret
 
-
 /*
  ************************************************************
  * BIOS interrupt 13h -- Disk services
@@ -394,12 +403,13 @@ gs	movw	OFFS_AX(%bp), %ax
 	ret
 Lfunc_15h:
 gs	movw	OFFS_AX(%bp), %ax
-	andw	$0xff, %ax			/* return AH=0->drive not present */
+
+	/* return AH=0->drive not present */
+	andw	$0x00ff, %ax
 gs	movw	%ax, OFFS_AX(%bp)
 	xorw	%ax, %ax
 	ret
 
-
 /*
  ***********************************************************
  * BIOS interrupt 15h -- Miscellaneous services
@@ -417,9 +427,12 @@ gs	movw	OFFS_AX(%bp), %ax
 	movw	$0xffff, %ax
 	ret
 
-Lfunc_c0h:					/* Return System Configuration Parameters (PS2 only) */
+Lfunc_c0h:
+	/* Return System Configuration Parameters (PS2 only) */
 gs	movw	OFFS_FLAGS(%bp), %ax
-	orw	$1, %ax				/* return carry -- function not supported */
+
+	/* return carry -- function not supported */
+	orw	$1, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	xorw	%ax, %ax
 	ret
@@ -430,38 +443,56 @@ gs	movw	OFFS_AX(%bp), %ax
 	cmpw	$1, %ax
 	je	Lfunc_e801h
 gs	movw	OFFS_FLAGS(%bp), %ax
-	orw	$1, %ax				/* return carry -- function not supported */
+
+	/* return carry -- function not supported */
+	orw	$1, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	xorw	%ax, %ax
 	ret
 
-Lfunc_e801h:					/* Get memory size for >64M Configurations */
+Lfunc_e801h:
+	/* Get memory size for >64M Configurations */
 cs	movw	ram_in_64kb_chunks, %ax
 	cmpw	$0x100, %ax
 	ja	e801_more_than_16mb
-	shlw	$6, %ax				/* multiply by 64 */
-	subw	$0x400, %ax			/* 1st meg does not count */
 
-gs	movw	%ax, OFFS_AX(%bp)		/* return memory size between 1M and 16M in 1kb chunks in AX and CX */
+	/* multiply by 64 */
+	shlw	$6, %ax
+
+	/* 1st meg does not count */
+	subw	$0x400, %ax
+
+	/* return memory size between 1M and 16M in 1kb chunks in AX and CX */
+gs	movw	%ax, OFFS_AX(%bp)
 gs	movw	%ax, OFFS_CX(%bp)
-gs	movw	$0, OFFS_BX(%bp)		/* set BX and DX to 0*/
+
+	/* set BX and DX to 0*/
+gs	movw	$0, OFFS_BX(%bp)
 gs	movw	$0, OFFS_DX(%bp)
 gs	movw	OFFS_FLAGS(%bp), %ax
-	andw	$0xfffe, %ax			/* clear carry -- function succeeded */
+
+	/* clear carry -- function succeeded */
+	andw	$0xfffe, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	xorw	%ax, %ax
 	ret
 
 e801_more_than_16mb:
-	subw	$0x100, %ax			/* subtract 16MB */
+	/* subtract 16MB */
+	subw	$0x100, %ax
 
-gs	movw	$0x3c00, OFFS_AX(%bp)		/* return 0x3c00 (16MB-1MB) in AX and CX */
+	/* return 0x3c00 (16MB-1MB) in AX and CX */
+gs	movw	$0x3c00, OFFS_AX(%bp)
 gs	movw	$0x3c00, OFFS_CX(%bp)
-gs	movw	%ax, OFFS_BX(%bp)		/* set BX and DX to number of 64kb chunks above 16MB */
+
+	/* set BX and DX to number of 64kb chunks above 16MB */
+gs	movw	%ax, OFFS_BX(%bp)
 gs	movw	%ax, OFFS_DX(%bp)
 
 gs	movw	OFFS_FLAGS(%bp), %ax
-	andw	$0xfffe, %ax			/* clear carry -- function succeeded */
+
+	/* clear carry -- function succeeded */
+	andw	$0xfffe, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	xorw	%ax, %ax
 	ret
@@ -473,18 +504,22 @@ cs	movw	ram_in_64kb_chunks, %ax
 	movw	$0x100, %ax
 b88_not_more_than16:
 	shlw	$6, %ax
-	subw	$0x400, %ax			/* 1st meg does not count */
 
-gs	movw	%ax, OFFS_AX(%bp)		/* return number of kilobytes between 16MB and 16MB in ax */
+	/* 1st meg does not count */
+	subw	$0x400, %ax
+
+	/* return number of kilobytes between 16MB and 16MB in ax */
+gs	movw	%ax, OFFS_AX(%bp)
 
 gs	movw	OFFS_FLAGS(%bp), %ax
-	andw	$0xfffe, %ax			/* clear carry -- function succeeded */
+
+	/* clear carry -- function succeeded */
+	andw	$0xfffe, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 
 	xorw	%ax, %ax
 	ret
 
-
 /*
  ************************************************************
  * BIOS interrupt 16h -- keyboard services
@@ -498,7 +533,8 @@ gs	movw	OFFS_AX(%bp), %ax
 	movw	$0xffff, %ax
 	ret
 Lfunc_03h:
-	xorw	%ax, %ax			/* do nothing -- function not supported */
+	/* do nothing -- function not supported */
+	xorw	%ax, %ax
 	ret
 
 /*
@@ -514,7 +550,9 @@ gs	movw	OFFS_AX(%bp), %ax
 	ret
 Lfunc_b1h:
 	call	realmode_pci_bios
-	xorw	%ax, %ax			/* do nothing -- function not supported */
+
+	/* do nothing -- function not supported */
+	xorw	%ax, %ax
 	ret
 
 

arch/x86/lib/board.c

@@ -33,111 +33,96 @@
 
 #include <common.h>
 #include <watchdog.h>
-#include <command.h>
 #include <stdio_dev.h>
-#include <version.h>
-#include <malloc.h>
-#include <net.h>
-#include <ide.h>
-#include <serial.h>
 #include <asm/u-boot-x86.h>
-#include <elf.h>
+#include <asm/relocate.h>
 
-#ifdef CONFIG_BITBANGMII
+#include <asm/init_helpers.h>
-#include <miiphy.h>
+#include <asm/init_wrappers.h>
-#endif
-
-/*
- * Pointer to initial global data area
- *
- * Here we initialize it.
- */
-#undef	XTRN_DECLARE_GLOBAL_DATA_PTR
-#define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
-
-/************************************************************************
- * Init Utilities							*
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * or dropped completely,
- * but let's get it working (again) first...
- */
-static int init_baudrate(void)
-{
-	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
-	return 0;
-}
-
-static int display_banner(void)
-{
-
-	printf("\n\n%s\n\n", version_string);
-
-	return 0;
-}
-
-static int display_dram_config(void)
-{
-	int i;
-
-	puts("DRAM Configuration:\n");
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
-		print_size(gd->bd->bi_dram[i].size, "\n");
-	}
-
-	return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
-	puts("Flash: ");
-	print_size(size, "\n");
-}
-#endif
 
 /*
  * Breath some life into the board...
  *
- * Initialize an SMC for serial comms, and carry out some hardware
+ * Getting the board up and running is a three-stage process:
- * tests.
+ *  1) Execute from Flash, SDRAM Uninitialised
+ *     At this point, there is a limited amount of non-SDRAM memory
+ *     (typically the CPU cache, but can also be SRAM or even a buffer of
+ *     of some peripheral). This limited memory is used to hold:
+ *      - The initial copy of the Global Data Structure
+ *      - A temporary stack
+ *      - A temporary x86 Global Descriptor Table
+ *      - The pre-console buffer (if enabled)
  *
- * The first part of initialization is running from Flash memory;
+ *     The following is performed during this phase of execution:
- * its main purpose is to initialize the RAM so that we
+ *      - Core low-level CPU initialisation
- * can relocate the monitor code to RAM.
+ *      - Console initialisation
+ *      - SDRAM initialisation
+ *
+ *  2) Execute from Flash, SDRAM Initialised
+ *     At this point we copy Global Data from the initial non-SDRAM
+ *     memory and set up the permanent stack in SDRAM. The CPU cache is no
+ *     longer being used as temporary memory, so we can now fully enable
+ *     it.
+ *
+ *     The following is performed during this phase of execution:
+ *      - Create final stack in SDRAM
+ *      - Copy Global Data from temporary memory to SDRAM
+ *      - Enabling of CPU cache(s),
+ *      - Copying of U-Boot code and data from Flash to RAM
+ *      - Clearing of the BSS
+ *      - ELF relocation adjustments
+ *
+ *  3) Execute from SDRAM
+ *     The following is performed during this phase of execution:
+ *      - All remaining initialisation
  */
 
 /*
- * All attempts to come up with a "common" initialization sequence
+ * The requirements for any new initalization function is simple: it is
- * that works for all boards and architectures failed: some of the
+ * a function with no parameters which returns an integer return code,
- * requirements are just _too_ different. To get rid of the resulting
+ * where 0 means "continue" and != 0 means "fatal error, hang the system"
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
  */
 typedef int (init_fnc_t) (void);
 
-static int calculate_relocation_address(void);
+/*
-static int copy_uboot_to_ram(void);
+ * init_sequence_f is the list of init functions which are run when U-Boot
-static int clear_bss(void);
+ * is executing from Flash with a limited 'C' environment. The following
-static int do_elf_reloc_fixups(void);
+ * limitations must be considered when implementing an '_f' function:
-
+ *  - 'static' variables are read-only
+ *  - Global Data (gd->xxx) is read/write
+ *  - Stack space is limited
+ *
+ * The '_f' sequence must, as a minimum, initialise SDRAM. It _should_
+ * also initialise the console (to provide early debug output)
+ */
 init_fnc_t *init_sequence_f[] = {
 	cpu_init_f,
 	board_early_init_f,
 	env_init,
-	init_baudrate,
+	init_baudrate_f,
 	serial_init,
 	console_init_f,
 	dram_init_f,
 	calculate_relocation_address,
+
+	NULL,
+};
+
+/*
+ * init_sequence_f_r is the list of init functions which are run when
+ * U-Boot is executing from Flash with a semi-limited 'C' environment.
+ * The following limitations must be considered when implementing an
+ * '_f_r' function:
+ *  - 'static' variables are read-only
+ *  - Global Data (gd->xxx) is read/write
+ *
+ * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
+ * supported).  It _should_, if possible, copy global data to RAM and
+ * initialise the CPU caches (to speed up the relocation process)
+ */
+init_fnc_t *init_sequence_f_r[] = {
+	copy_gd_to_ram_f_r,
+	init_cache_f_r,
 	copy_uboot_to_ram,
 	clear_bss,
 	do_elf_reloc_fixups,
@@ -145,294 +130,130 @@ init_fnc_t *init_sequence_f[] = {
 	NULL,
 };
 
+/*
+ * init_sequence_r is the list of init functions which are run when U-Boot
+ * is executing from RAM with a full 'C' environment. There are no longer
+ * any limitations which must be considered when implementing an '_r'
+ * function, (i.e.'static' variables are read/write)
+ *
+ * If not already done, the '_r' sequence must copy global data to RAM and
+ * (should) initialise the CPU caches.
+ */
 init_fnc_t *init_sequence_r[] = {
-	cpu_init_r,		/* basic cpu dependent setup */
+	set_reloc_flag_r,
-	board_early_init_r,	/* basic board dependent setup */
+	init_bd_struct_r,
-	dram_init,		/* configure available RAM banks */
+	mem_malloc_init_r,
-	interrupt_init,		/* set up exceptions */
+	cpu_init_r,
+	board_early_init_r,
+	dram_init,
+	interrupt_init,
 	timer_init,
 	display_banner,
 	display_dram_config,
-
+#ifdef CONFIG_SERIAL_MULTI
+	serial_initialize_r,
+#endif
+#ifndef CONFIG_SYS_NO_FLASH
+	flash_init_r,
+#endif
+	env_relocate_r,
+#ifdef CONFIG_CMD_NET
+	init_ip_address_r,
+#endif
+#ifdef CONFIG_PCI
+	pci_init_r,
+#endif
+	stdio_init,
+	jumptable_init_r,
+	console_init_r,
+#ifdef CONFIG_MISC_INIT_R
+	misc_init_r,
+#endif
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+	pci_init_r,
+#endif
+#if defined(CONFIG_CMD_KGDB)
+	kgdb_init_r,
+#endif
+	enable_interrupts_r,
+#ifdef CONFIG_STATUS_LED
+	status_led_set_r,
+#endif
+	set_load_addr_r,
+#if defined(CONFIG_CMD_NET)
+	set_bootfile_r,
+#endif
+#if defined(CONFIG_CMD_IDE)
+	ide_init_r,
+#endif
+#if defined(CONFIG_CMD_SCSI)
+	scsi_init_r,
+#endif
+#if defined(CONFIG_CMD_DOC)
+	doc_init_r,
+#endif
+#ifdef CONFIG_BITBANGMII
+	bb_miiphy_init_r,
+#endif
+#if defined(CONFIG_CMD_NET)
+	eth_initialize_r,
+#ifdef CONFIG_RESET_PHY_R
+	reset_phy_r,
+#endif
+#endif
+#ifdef CONFIG_LAST_STAGE_INIT
+	last_stage_init,
+#endif
 	NULL,
 };
 
-gd_t *gd;
+static void do_init_loop(init_fnc_t **init_fnc_ptr)
-
-static int calculate_relocation_address(void)
 {
-	ulong text_start = (ulong)&__text_start;
+	for (; *init_fnc_ptr; ++init_fnc_ptr) {
-	ulong bss_end = (ulong)&__bss_end;
+		WATCHDOG_RESET();
-	ulong dest_addr;
-	ulong rel_offset;
-
-	/* Calculate destination RAM Address and relocation offset */
-	dest_addr = gd->ram_size;
-	dest_addr -= CONFIG_SYS_STACK_SIZE;
-	dest_addr -= (bss_end - text_start);
-
-	/*
-	 * Round destination address down to 16-byte boundary to keep
-	 * IDT and GDT 16-byte aligned
-	 */
-	dest_addr &= ~15;
-
-	rel_offset = dest_addr - text_start;
-
-	gd->start_addr_sp = gd->ram_size;
-	gd->relocaddr = dest_addr;
-	gd->reloc_off = rel_offset;
-
-	return 0;
-}
-
-static int copy_uboot_to_ram(void)
-{
-	ulong *dst_addr = (ulong *)gd->relocaddr;
-	ulong *src_addr = (ulong *)&__text_start;
-	ulong *end_addr = (ulong *)&__data_end;
-
-	while (src_addr < end_addr)
-		*dst_addr++ = *src_addr++;
-
-	return 0;
-}
-
-static int clear_bss(void)
-{
-	void *bss_start = &__bss_start;
-	void *bss_end = &__bss_end;
-
-	ulong *dst_addr = (ulong *)(bss_start + gd->reloc_off);
-	ulong *end_addr = (ulong *)(bss_end + gd->reloc_off);
-
-	while (dst_addr < end_addr)
-		*dst_addr++ = 0x00000000;
-
-	return 0;
-}
-
-static int do_elf_reloc_fixups(void)
-{
-	Elf32_Rel *re_src = (Elf32_Rel *)(&__rel_dyn_start);
-	Elf32_Rel *re_end = (Elf32_Rel *)(&__rel_dyn_end);
-
-	Elf32_Addr *offset_ptr_rom;
-	Elf32_Addr *offset_ptr_ram;
-
-	/* The size of the region of u-boot that runs out of RAM. */
-	uintptr_t size = (uintptr_t)&__bss_end - (uintptr_t)&__text_start;
-
-	do {
-		/* Get the location from the relocation entry */
-		offset_ptr_rom = (Elf32_Addr *)re_src->r_offset;
-
-		/* Check that the location of the relocation is in .text */
-		if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE) {
-
-			/* Switch to the in-RAM version */
-			offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom +
-							gd->reloc_off);
-
-			/* Check that the target points into .text */
-			if (*offset_ptr_ram >= CONFIG_SYS_TEXT_BASE &&
-					*offset_ptr_ram <
-					(CONFIG_SYS_TEXT_BASE + size)) {
-				*offset_ptr_ram += gd->reloc_off;
-			}
-		}
-	} while (re_src++ < re_end);
-
-	return 0;
-}
-
-/* Load U-Boot into RAM, initialize BSS, perform relocation adjustments */
-void board_init_f(ulong boot_flags)
-{
-	init_fnc_t **init_fnc_ptr;
-
-	gd->flags = boot_flags;
-
-	for (init_fnc_ptr = init_sequence_f; *init_fnc_ptr; ++init_fnc_ptr) {
 		if ((*init_fnc_ptr)() != 0)
 			hang();
 	}
+}
 
-	gd->flags |= GD_FLG_RELOC;
+void board_init_f(ulong boot_flags)
+{
+	gd->flags = boot_flags;
 
-	/* Enter the relocated U-Boot! */
+	do_init_loop(init_sequence_f);
-	relocate_code(gd->start_addr_sp, gd, gd->relocaddr);
 
-	/* NOTREACHED - relocate_code() does not return */
+	/*
+	 * SDRAM and console are now initialised. The final stack can now
+	 * be setup in SDRAM. Code execution will continue in Flash, but
+	 * with the stack in SDRAM and Global Data in temporary memory
+	 * (CPU cache)
+	 */
+	board_init_f_r_trampoline(gd->start_addr_sp);
+
+	/* NOTREACHED - board_init_f_r_trampoline() does not return */
+	while (1)
+		;
+}
+
+void board_init_f_r(void)
+{
+	do_init_loop(init_sequence_f_r);
+
+	/*
+	 * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
+	 * Transfer execution from Flash to RAM by calculating the address
+	 * of the in-RAM copy of board_init_r() and calling it
+	 */
+	(board_init_r + gd->reloc_off)(gd, gd->relocaddr);
+
+	/* NOTREACHED - board_init_r() does not return */
 	while (1)
 		;
 }
 
 void board_init_r(gd_t *id, ulong dest_addr)
 {
-#if defined(CONFIG_CMD_NET)
+	do_init_loop(init_sequence_r);
-	char *s;
-#endif
-#ifndef CONFIG_SYS_NO_FLASH
-	ulong size;
-#endif
-	static bd_t bd_data;
-	static gd_t gd_data;
-	init_fnc_t **init_fnc_ptr;
-
-	show_boot_progress(0x21);
-
-	/* Global data pointer is now writable */
-	gd = &gd_data;
-	memcpy(gd, id, sizeof(gd_t));
-
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("" : : : "memory");
-
-	gd->bd = &bd_data;
-	memset(gd->bd, 0, sizeof(bd_t));
-	show_boot_progress(0x22);
-
-	gd->baudrate =  CONFIG_BAUDRATE;
-
-	mem_malloc_init((((ulong)dest_addr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
-			CONFIG_SYS_MALLOC_LEN);
-
-	for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr)() != 0)
-			hang();
-	}
-	show_boot_progress(0x23);
-
-#ifdef CONFIG_SERIAL_MULTI
-	serial_initialize();
-#endif
-
-#ifndef CONFIG_SYS_NO_FLASH
-	/* configure available FLASH banks */
-	size = flash_init();
-	display_flash_config(size);
-	show_boot_progress(0x24);
-#endif
-
-	show_boot_progress(0x25);
-
-	/* initialize environment */
-	env_relocate();
-	show_boot_progress(0x26);
-
-
-#ifdef CONFIG_CMD_NET
-	/* IP Address */
-	bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
-#endif
-
-#if defined(CONFIG_PCI)
-	/*
-	 * Do pci configuration
-	 */
-	pci_init();
-#endif
-
-	show_boot_progress(0x27);
-
-
-	stdio_init();
-
-	jumptable_init();
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r();
-
-#ifdef CONFIG_MISC_INIT_R
-	/* miscellaneous platform dependent initialisations */
-	misc_init_r();
-#endif
-
-#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET();
-	puts("PCMCIA:");
-	pcmcia_init();
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-	WATCHDOG_RESET();
-	puts("KGDB:  ");
-	kgdb_init();
-#endif
-
-	/* enable exceptions */
-	enable_interrupts();
-	show_boot_progress(0x28);
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
-	udelay(20);
-
-	/* Initialize from environment */
-	load_addr = getenv_ulong("loadaddr", 16, load_addr);
-#if defined(CONFIG_CMD_NET)
-	s = getenv("bootfile");
-
-	if (s != NULL)
-		copy_filename(BootFile, s, sizeof(BootFile));
-#endif
-
-	WATCHDOG_RESET();
-
-#if defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET();
-	puts("IDE:   ");
-	ide_init();
-#endif
-
-#if defined(CONFIG_CMD_SCSI)
-	WATCHDOG_RESET();
-	puts("SCSI:  ");
-	scsi_init();
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-	WATCHDOG_RESET();
-	puts("DOC:   ");
-	doc_init();
-#endif
-
-#ifdef CONFIG_BITBANGMII
-	bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-	WATCHDOG_RESET();
-	puts("Net:   ");
-	eth_initialize(gd->bd);
-#endif
-
-#if (defined(CONFIG_CMD_NET)) && (0)
-	WATCHDOG_RESET();
-# ifdef DEBUG
-	puts("Reset Ethernet PHY\n");
-# endif
-	reset_phy();
-#endif
-
-#ifdef CONFIG_LAST_STAGE_INIT
-	WATCHDOG_RESET();
-	/*
-	 * Some parts can be only initialized if all others (like
-	 * Interrupts) are up and running (i.e. the PC-style ISA
-	 * keyboard).
-	 */
-	last_stage_init();
-#endif
-
-
-#ifdef CONFIG_POST
-	post_run(NULL, POST_RAM | post_bootmode_get(0));
-#endif
-
-	show_boot_progress(0x29);
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;)
@@ -447,37 +268,3 @@ void hang(void)
 	for (;;)
 		;
 }
-
-unsigned long do_go_exec(ulong (*entry)(int, char * const []),
-			 int argc, char * const argv[])
-{
-	unsigned long ret = 0;
-	char **argv_tmp;
-
-	/*
-	 * x86 does not use a dedicated register to pass the pointer to
-	 * the global_data, so it is instead passed as argv[-1]. By using
-	 * argv[-1], the called 'Application' can use the contents of
-	 * argv natively. However, to safely use argv[-1] a new copy of
-	 * argv is needed with the extra element
-	 */
-	argv_tmp = malloc(sizeof(char *) * (argc + 1));
-
-	if (argv_tmp) {
-		argv_tmp[0] = (char *)gd;
-
-		memcpy(&argv_tmp[1], argv, (size_t)(sizeof(char *) * argc));
-
-		ret = (entry) (argc, &argv_tmp[1]);
-		free(argv_tmp);
-	}
-
-	return ret;
-}
-
-void setup_pcat_compatibility(void)
-	__attribute__((weak, alias("__setup_pcat_compatibility")));
-
-void __setup_pcat_compatibility(void)
-{
-}

arch/x86/lib/cmd_boot.c

@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <asm/u-boot-x86.h>
+
+unsigned long do_go_exec(ulong (*entry)(int, char * const []),
+			 int argc, char * const argv[])
+{
+	unsigned long ret = 0;
+	char **argv_tmp;
+
+	/*
+	 * x86 does not use a dedicated register to pass the pointer to
+	 * the global_data, so it is instead passed as argv[-1]. By using
+	 * argv[-1], the called 'Application' can use the contents of
+	 * argv natively. However, to safely use argv[-1] a new copy of
+	 * argv is needed with the extra element
+	 */
+	argv_tmp = malloc(sizeof(char *) * (argc + 1));
+
+	if (argv_tmp) {
+		argv_tmp[0] = (char *)gd;
+
+		memcpy(&argv_tmp[1], argv, (size_t)(sizeof(char *) * argc));
+
+		ret = (entry) (argc, &argv_tmp[1]);
+		free(argv_tmp);
+	}
+
+	return ret;
+}

arch/x86/lib/init_helpers.c

@@ -0,0 +1,217 @@
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <stdio_dev.h>
+#include <version.h>
+#include <malloc.h>
+#include <net.h>
+#include <ide.h>
+#include <serial.h>
+#include <status_led.h>
+#include <asm/processor.h>
+#include <asm/u-boot-x86.h>
+
+#include <asm/init_helpers.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/************************************************************************
+ * Init Utilities							*
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * or dropped completely,
+ * but let's get it working (again) first...
+ */
+
+int display_banner(void)
+{
+	printf("\n\n%s\n\n", version_string);
+
+	return 0;
+}
+
+int display_dram_config(void)
+{
+	int i;
+
+	puts("DRAM Configuration:\n");
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size(gd->bd->bi_dram[i].size, "\n");
+	}
+
+	return 0;
+}
+
+int init_baudrate_f(void)
+{
+	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+	return 0;
+}
+
+int calculate_relocation_address(void)
+{
+	ulong text_start = (ulong)&__text_start;
+	ulong bss_end = (ulong)&__bss_end;
+	ulong dest_addr;
+
+	/*
+	 * NOTE: All destination address are rounded down to 16-byte
+	 *       boundary to satisfy various worst-case alignment
+	 *       requirements
+	 */
+
+	/* Global Data is at top of available memory */
+	dest_addr = gd->ram_size;
+	dest_addr -= GENERATED_GBL_DATA_SIZE;
+	dest_addr &= ~15;
+	gd->new_gd_addr = dest_addr;
+
+	/* GDT is below Global Data */
+	dest_addr -= X86_GDT_SIZE;
+	dest_addr &= ~15;
+	gd->gdt_addr = dest_addr;
+
+	/* Stack is below GDT */
+	gd->start_addr_sp = dest_addr;
+
+	/* U-Boot is below the stack */
+	dest_addr -= CONFIG_SYS_STACK_SIZE;
+	dest_addr -= (bss_end - text_start);
+	dest_addr &= ~15;
+	gd->relocaddr = dest_addr;
+	gd->reloc_off = (dest_addr - text_start);
+
+	return 0;
+}
+
+int copy_gd_to_ram_f_r(void)
+{
+	gd_t *ram_gd;
+
+	/*
+	 * Global data is still in temporary memory (the CPU cache).
+	 * calculate_relocation_address() has set gd->new_gd_addr to
+	 * where the global data lives in RAM but getting it there
+	 * safely is a bit tricky due to the 'F-Segment Hack' that
+	 * we need to use for x86
+	 */
+	ram_gd = (gd_t *)gd->new_gd_addr;
+	memcpy((void *)ram_gd, gd, sizeof(gd_t));
+
+	/*
+	 * Reload the Global Descriptor Table so FS points to the
+	 * in-RAM copy of Global Data (calculate_relocation_address()
+	 * has already calculated the in-RAM location of the GDT)
+	 */
+	ram_gd->gd_addr = (ulong)ram_gd;
+	init_gd(ram_gd, (u64 *)gd->gdt_addr);
+
+	return 0;
+}
+
+int init_cache_f_r(void)
+{
+	/* Initialise the CPU cache(s) */
+	return init_cache();
+}
+
+int set_reloc_flag_r(void)
+{
+	gd->flags = GD_FLG_RELOC;
+
+	return 0;
+}
+
+int mem_malloc_init_r(void)
+{
+	mem_malloc_init(((gd->relocaddr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
+			CONFIG_SYS_MALLOC_LEN);
+
+	return 0;
+}
+
+bd_t bd_data;
+
+int init_bd_struct_r(void)
+{
+	gd->bd = &bd_data;
+	memset(gd->bd, 0, sizeof(bd_t));
+
+	return 0;
+}
+
+#ifndef CONFIG_SYS_NO_FLASH
+int flash_init_r(void)
+{
+	ulong size;
+
+	puts("Flash: ");
+
+	/* configure available FLASH banks */
+	size = flash_init();
+
+	print_size(size, "\n");
+
+	return 0;
+}
+#endif
+
+int init_ip_address_r(void)
+{
+	/* IP Address */
+	bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
+
+	return 0;
+}
+
+#ifdef CONFIG_STATUS_LED
+int status_led_set_r(void)
+{
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+
+	return 0;
+}
+#endif
+
+int set_bootfile_r(void)
+{
+	char *s;
+
+	s = getenv("bootfile");
+
+	if (s != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
+
+	return 0;
+}
+
+int set_load_addr_r(void)
+{
+	/* Initialize from environment */
+	load_addr = getenv_ulong("loadaddr", 16, load_addr);
+
+	return 0;
+}

arch/x86/lib/init_wrappers.c

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <serial.h>
+#include <kgdb.h>
+#include <scsi.h>
+#include <post.h>
+#include <miiphy.h>
+
+#include <asm/init_wrappers.h>
+
+int serial_initialize_r(void)
+{
+	serial_initialize();
+
+	return 0;
+}
+
+int env_relocate_r(void)
+{
+	/* initialize environment */
+	env_relocate();
+
+	return 0;
+}
+
+
+int pci_init_r(void)
+{
+	/* Do pci configuration */
+	pci_init();
+
+	return 0;
+}
+
+int jumptable_init_r(void)
+{
+	jumptable_init();
+
+	return 0;
+}
+
+int pcmcia_init_r(void)
+{
+	puts("PCMCIA:");
+	pcmcia_init();
+
+	return 0;
+}
+
+int kgdb_init_r(void)
+{
+	puts("KGDB:  ");
+	kgdb_init();
+
+	return 0;
+}
+
+int enable_interrupts_r(void)
+{
+	/* enable exceptions */
+	enable_interrupts();
+
+	return 0;
+}
+
+int eth_initialize_r(void)
+{
+	puts("Net:   ");
+	eth_initialize(gd->bd);
+
+	return 0;
+}
+
+int reset_phy_r(void)
+{
+#ifdef DEBUG
+	puts("Reset Ethernet PHY\n");
+#endif
+	reset_phy();
+
+	return 0;
+}
+
+int ide_init_r(void)
+{
+	puts("IDE:   ");
+	ide_init();
+
+	return 0;
+}
+
+int scsi_init_r(void)
+{
+	puts("SCSI:  ");
+	scsi_init();
+
+	return 0;
+}
+
+#ifdef CONFIG_BITBANGMII
+int bb_miiphy_init_r(void)
+{
+	bb_miiphy_init();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_POST
+int post_run_r(void)
+{
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
+
+	return 0;
+}
+#endif

arch/x86/lib/realmode_switch.S

@@ -49,6 +49,7 @@
 
 .section .realmode, "ax"
 .code16
+
 	/* 16bit protected mode code here */
 .globl realmode_enter
 realmode_enter:
@@ -69,12 +70,16 @@ o32	pushf
 	movw	%ax, %gs
 
 	lidt	realmode_idt_ptr
-	movl	%cr0, %eax			/* Go back into real mode by */
+	/* Go back into real mode by clearing PE to 0 */
-	andl	$0x7ffffffe, %eax		/* clearing PE to 0 */
+	movl	%cr0, %eax
+	andl	$0x7ffffffe, %eax
 	movl	%eax, %cr0
-	ljmp	$0x0,$do_realmode		/* switch to real mode */
 
-do_realmode:					/* realmode code from here */
+	/* switch to real mode */
+	ljmp	$0x0,$do_realmode
+
+do_realmode:
+	/* realmode code from here */
 	movw	%cs,%ax
 	movw	%ax,%ds
 	movw	%ax,%es
@@ -82,7 +87,6 @@ do_realmode:					/* realmode code from here */
 	movw	%ax,%gs
 
 	/* create a temporary stack */
-
 	movw	$0xc0, %ax
 	movw	%ax, %ss
 	movw	$0x200, %ax
@@ -114,14 +118,16 @@ o32	popf
 	popw	%ss
 	movl	%eax, %esp
 cs	movl	temp_eax, %eax
-	wbinvd					/* self-modifying code,
+
-						 * better flush the cache */
+	/* self-modifying code, better flush the cache */
+	wbinvd
 
 	.byte	0x9a				/* lcall */
 temp_ip:
 	.word	0				/* new ip */
 temp_cs:
 	.word	0				/* new cs */
+
 realmode_ret:
 	/* save eax, esp and ss */
 cs	movl	%eax, saved_eax
@@ -130,10 +136,11 @@ cs	movl	%eax, saved_esp
 	movw	%ss, %ax
 cs	movw	%ax, saved_ss
 
-	/* restore the stack, note that we set sp to 0x244;
+	/*
+	 * restore the stack, note that we set sp to 0x244;
 	 * pt_regs is 0x44 bytes long and we push the structure
-	 * backwards on to the stack, bottom first */
+	 * backwards on to the stack, bottom first
-
+	 */
 	movw	$0xc0, %ax
 	movw	%ax, %ss
 	movw	$0x244, %ax
@@ -169,12 +176,15 @@ cs	movw	temp_ip, %ax
 	pushl	%ebx
 
 o32 cs	lidt	saved_idt
-o32 cs	lgdt	saved_gdt			/* Set GDTR */
+o32 cs	lgdt	saved_gdt
 
-	movl	%cr0, %eax			/* Go back into protected mode */
+	/* Go back into protected mode reset PE to 1 */
-	orl	$1,%eax	/* reset PE to 1 */
+	movl	%cr0, %eax
+	orl	$1,%eax
 	movl	%eax, %cr0
-	jmp	next_line			/* flush prefetch queue */
+
+	/* flush prefetch queue */
+	jmp	next_line
 next_line:
 	movw	$return_ptr, %ax
 	movw	%ax,%bp
@@ -182,12 +192,13 @@ o32 cs	ljmp	*(%bp)
 
 .code32
 protected_mode:
-	movl	$0x18,%eax			/* reload GDT[3] */
+	/* Reload segment registers */
-	movw	%ax,%fs				/* reset FS */
+	movl	$0x18, %eax
-	movw	%ax,%ds				/* reset DS */
+	movw	%ax, %fs
-	movw	%ax,%gs				/* reset GS */
+	movw	%ax, %ds
-	movw	%ax,%es				/* reset ES */
+	movw	%ax, %gs
-	movw	%ax,%ss				/* reset SS */
+	movw	%ax, %es
+	movw	%ax, %ss
 	movl	saved_protected_mode_esp, %eax
 	movl	%eax, %esp
 	popf

arch/x86/lib/relocate.c

@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/u-boot-x86.h>
+#include <asm/relocate.h>
+#include <elf.h>
+
+int copy_uboot_to_ram(void)
+{
+	size_t len = (size_t)&__data_end - (size_t)&__text_start;
+
+	memcpy((void *)gd->relocaddr, (void *)&__text_start, len);
+
+	return 0;
+}
+
+int clear_bss(void)
+{
+	ulong dst_addr = (ulong)&__bss_start + gd->reloc_off;
+	size_t len = (size_t)&__bss_end - (size_t)&__bss_start;
+
+	memset((void *)dst_addr, 0x00, len);
+
+	return 0;
+}
+
+int do_elf_reloc_fixups(void)
+{
+	Elf32_Rel *re_src = (Elf32_Rel *)(&__rel_dyn_start);
+	Elf32_Rel *re_end = (Elf32_Rel *)(&__rel_dyn_end);
+
+	Elf32_Addr *offset_ptr_rom;
+	Elf32_Addr *offset_ptr_ram;
+
+	/* The size of the region of u-boot that runs out of RAM. */
+	uintptr_t size = (uintptr_t)&__bss_end - (uintptr_t)&__text_start;
+
+	do {
+		/* Get the location from the relocation entry */
+		offset_ptr_rom = (Elf32_Addr *)re_src->r_offset;
+
+		/* Check that the location of the relocation is in .text */
+		if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE) {
+
+			/* Switch to the in-RAM version */
+			offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom +
+							gd->reloc_off);
+
+			/* Check that the target points into .text */
+			if (*offset_ptr_ram >= CONFIG_SYS_TEXT_BASE &&
+					*offset_ptr_ram <
+					(CONFIG_SYS_TEXT_BASE + size)) {
+				*offset_ptr_ram += gd->reloc_off;
+			}
+		}
+	} while (re_src++ < re_end);
+
+	return 0;
+}

arch/x86/lib/string.c

@@ -85,3 +85,64 @@ void *memset(void *dstpp, int c, size_t len)
 
 	return dstpp;
 }
+
+#define	OP_T_THRES	8
+#define OPSIZ	(sizeof(op_t))
+
+#define BYTE_COPY_FWD(dst_bp, src_bp, nbytes)				  \
+do {									  \
+	int __d0;							  \
+	asm volatile(							  \
+		/* Clear the direction flag, so copying goes forward.  */ \
+		"cld\n"							  \
+		/* Copy bytes.  */					  \
+		"rep\n"							  \
+		"movsb" :						  \
+		"=D" (dst_bp), "=S" (src_bp), "=c" (__d0) :		  \
+		"0" (dst_bp), "1" (src_bp), "2" (nbytes) :		  \
+		"memory");						  \
+} while (0)
+
+#define WORD_COPY_FWD(dst_bp, src_bp, nbytes_left, nbytes)		  \
+do {									  \
+	int __d0;							  \
+	asm volatile(							  \
+		/* Clear the direction flag, so copying goes forward.  */ \
+		"cld\n"							  \
+		/* Copy longwords.  */					  \
+		"rep\n"							  \
+		"movsl" :						  \
+		"=D" (dst_bp), "=S" (src_bp), "=c" (__d0) :		  \
+		"0" (dst_bp), "1" (src_bp), "2" ((nbytes) / 4) :	  \
+		"memory");						  \
+	(nbytes_left) = (nbytes) % 4;					  \
+} while (0)
+
+void *memcpy(void *dstpp, const void *srcpp, size_t len)
+{
+	unsigned long int dstp = (long int)dstpp;
+	unsigned long int srcp = (long int)srcpp;
+
+	/* Copy from the beginning to the end.  */
+
+	/* If there not too few bytes to copy, use word copy.  */
+	if (len >= OP_T_THRES) {
+		/* Copy just a few bytes to make DSTP aligned.  */
+		len -= (-dstp) % OPSIZ;
+		BYTE_COPY_FWD(dstp, srcp, (-dstp) % OPSIZ);
+
+		/* Copy from SRCP to DSTP taking advantage of the known
+		 * alignment of DSTP.  Number of bytes remaining is put
+		 * in the third argument, i.e. in LEN.  This number may
+		 * vary from machine to machine.
+		 */
+		WORD_COPY_FWD(dstp, srcp, len, len);
+
+		/* Fall out and copy the tail.  */
+	}
+
+	/* There are just a few bytes to copy. Use byte memory operations. */
+	BYTE_COPY_FWD(dstp, srcp, len);
+
+	return dstpp;
+}

arch/x86/lib/zimage.c

@@ -314,6 +314,13 @@ void boot_zimage(void *setup_base, void *load_address)
 #endif
 }
 
+void setup_pcat_compatibility(void)
+	__attribute__((weak, alias("__setup_pcat_compatibility")));
+
+void __setup_pcat_compatibility(void)
+{
+}
+
 int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 {
 	struct boot_params *base_ptr;