net: eepro100: Add DM support

Add support for driver model to the driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
This commit is contained in:
Marek Vasut 2020-05-23 16:26:20 +02:00
parent 8835103e24
commit af8ecdf7e5

View file

@ -206,14 +206,21 @@ struct eepro100_priv {
/* TX descriptor ring pointer */
int tx_next;
int tx_threshold;
#ifdef CONFIG_DM_ETH
struct udevice *devno;
#else
struct eth_device dev;
pci_dev_t devno;
#endif
char *name;
void __iomem *iobase;
u8 *enetaddr;
};
#if defined(CONFIG_E500)
#if defined(CONFIG_DM_ETH)
#define bus_to_phys(dev, a) dm_pci_mem_to_phys((dev), (a))
#define phys_to_bus(dev, a) dm_pci_phys_to_mem((dev), (a))
#elif defined(CONFIG_E500)
#define bus_to_phys(dev, a) (a)
#define phys_to_bus(dev, a) (a)
#else
@ -771,6 +778,7 @@ done:
return;
}
#ifndef CONFIG_DM_ETH
static int eepro100_init(struct eth_device *dev, bd_t *bis)
{
struct eepro100_priv *priv =
@ -888,3 +896,122 @@ int eepro100_initialize(bd_t *bis)
return card_number;
}
#else /* DM_ETH */
static int eepro100_start(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct eepro100_priv *priv = dev_get_priv(dev);
memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
return eepro100_init_common(priv);
}
static void eepro100_stop(struct udevice *dev)
{
struct eepro100_priv *priv = dev_get_priv(dev);
eepro100_halt_common(priv);
}
static int eepro100_send(struct udevice *dev, void *packet, int length)
{
struct eepro100_priv *priv = dev_get_priv(dev);
int ret;
ret = eepro100_send_common(priv, packet, length);
return ret ? 0 : -ETIMEDOUT;
}
static int eepro100_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct eepro100_priv *priv = dev_get_priv(dev);
return eepro100_recv_common(priv, packetp);
}
static int eepro100_free_pkt(struct udevice *dev, uchar *packet, int length)
{
struct eepro100_priv *priv = dev_get_priv(dev);
eepro100_free_pkt_common(priv);
return 0;
}
static int eepro100_read_rom_hwaddr(struct udevice *dev)
{
struct eepro100_priv *priv = dev_get_priv(dev);
eepro100_get_hwaddr(priv);
return 0;
}
static int eepro100_bind(struct udevice *dev)
{
static int card_number;
char name[16];
sprintf(name, "eepro100#%u", card_number++);
return device_set_name(dev, name);
}
static int eepro100_probe(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct eepro100_priv *priv = dev_get_priv(dev);
u16 command, status;
u32 iobase;
int ret;
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
iobase &= ~0xf;
debug("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n", iobase);
priv->devno = dev;
priv->enetaddr = plat->enetaddr;
priv->iobase = (void __iomem *)bus_to_phys(dev, iobase);
command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
dm_pci_write_config16(dev, PCI_COMMAND, command);
dm_pci_read_config16(dev, PCI_COMMAND, &status);
if ((status & command) != command) {
printf("eepro100: Couldn't enable IO access or Bus Mastering\n");
return -EINVAL;
}
ret = eepro100_initialize_mii(priv);
if (ret)
return ret;
dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20);
return 0;
}
static const struct eth_ops eepro100_ops = {
.start = eepro100_start,
.send = eepro100_send,
.recv = eepro100_recv,
.stop = eepro100_stop,
.free_pkt = eepro100_free_pkt,
.read_rom_hwaddr = eepro100_read_rom_hwaddr,
};
U_BOOT_DRIVER(eth_eepro100) = {
.name = "eth_eepro100",
.id = UCLASS_ETH,
.bind = eepro100_bind,
.probe = eepro100_probe,
.ops = &eepro100_ops,
.priv_auto_alloc_size = sizeof(struct eepro100_priv),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};
U_BOOT_PCI_DEVICE(eth_eepro100, supported);
#endif