Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-26 14:40:41 +00:00
Code Issues Projects Releases Packages Wiki Activity

mmc: rockchip_sdhci: Add support for RK3588

Browse source 
Add support for RK3588 to the rockchip sdhci driver.

Use driver data to handle differences between RK3568 and RK3588:

- Set "Receive original clock source is auto gating" for RK3588.
- Set "Receive clock source is no-inverted" only on RK3568 and "Transmit
  clock source is invertion of original clock input" for RK3588.
- Use different txclk_tapnum for HS400 modes on RK3588.
- Configure the CMDOUT reg for HS400 modes for RK3588.

This is based on the mainline linux and vendor kernel driver and have
successfully been tested with rock5b-rk3588_defconfig and

  CONFIG_MMC_HS200_SUPPORT=y
  CONFIG_MMC_HS400_SUPPORT=y
  CONFIG_MMC_HS400_ES_SUPPORT=y
  CONFIG_MMC_SPEED_MODE_SET=y

using the following command to switch mode and then read 512 MiB of data
from eMMC into memory,

  => mmc dev 0 0 <mode> && mmc info && mmc read 10000000 2000 10000

for each of the modes below.

  0 = MMC legacy
  1 = MMC High Speed (26MHz)
  3 = MMC High Speed (52MHz)
  4 = MMC DDR52 (52MHz)
  10 = HS200 (200MHz)
  11 = HS400 (200MHz)
  12 = HS400ES (200MHz)

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman 2023-04-18 16:46:39 +00:00 committed by Kever Yang
parent 72b05764c3
commit a3cab289f6
1 changed files with 53 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

57
drivers/mmc/rockchip_sdhci.c
View file

@ -56,6 +56,7 @@
#define DWCMSHC_EMMC_DLL_RXCLK 0x804
#define DWCMSHC_EMMC_DLL_TXCLK 0x808
#define DWCMSHC_EMMC_DLL_STRBIN 0x80c
#define DWCMSHC_EMMC_DLL_CMDOUT 0x810
#define DWCMSHC_EMMC_DLL_STATUS0 0x840
#define DWCMSHC_EMMC_DLL_STATUS1 0x844
#define DWCMSHC_EMMC_DLL_START BIT(0)
@ -70,18 +71,27 @@
#define DLL_RXCLK_NO_INVERTER BIT(29)
#define DLL_RXCLK_ORI_GATE BIT(31)
#define DLL_TXCLK_TAPNUM_DEFAULT 0x10
#define DLL_TXCLK_TAPNUM_90_DEGREES 0x9
#define DLL_TXCLK_TAPNUM_FROM_SW BIT(24)
#define DLL_TXCLK_NO_INVERTER BIT(29)
#define DLL_STRBIN_TAPNUM_DEFAULT 0x4
#define DLL_STRBIN_TAPNUM_FROM_SW BIT(24)
#define DLL_STRBIN_DELAY_NUM_SEL BIT(26)
#define DLL_STRBIN_DELAY_NUM_OFFSET 16
#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x10
#define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
#define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
#define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
#define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
#define DLL_CMDOUT_BOTH_CLK_EDGE BIT(30)
#define DLL_LOCK_WO_TMOUT(x) \
((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \
(((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0))
#define ROCKCHIP_MAX_CLKS 3
#define FLAG_INVERTER_FLAG_IN_RXCLK BIT(0)
struct rockchip_sdhc_plat {
struct mmc_config cfg;
struct mmc mmc;
@ -144,6 +154,10 @@ struct sdhci_data {
* Return: 0 if successful, -ve on error
*/
int (*set_enhanced_strobe)(struct sdhci_host *host);
u32 flags;
u8 hs200_txclk_tapnum;
u8 hs400_txclk_tapnum;
};
static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)
@ -294,8 +308,11 @@ static void rk3568_sdhci_set_clock(struct sdhci_host *host, u32 div)
static int rk3568_sdhci_config_dll(struct sdhci_host *host, u32 clock, bool enable)
{
struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
struct mmc *mmc = host->mmc;
int val, ret;
u32 extra;
u32 extra, txclk_tapnum;
if (!enable)
return 0;
@ -318,12 +335,28 @@ static int rk3568_sdhci_config_dll(struct sdhci_host *host, u32 clock, bool enab
if (ret)
return ret;
extra = DWCMSHC_EMMC_DLL_DLYENA | DLL_RXCLK_NO_INVERTER;
extra = DWCMSHC_EMMC_DLL_DLYENA | DLL_RXCLK_ORI_GATE;
if (data->flags & FLAG_INVERTER_FLAG_IN_RXCLK)
extra |= DLL_RXCLK_NO_INVERTER;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK);
txclk_tapnum = data->hs200_txclk_tapnum;
if (mmc->selected_mode == MMC_HS_400 ||
mmc->selected_mode == MMC_HS_400_ES) {
txclk_tapnum = data->hs400_txclk_tapnum;
extra = DLL_CMDOUT_SRC_CLK_NEG |
DLL_CMDOUT_BOTH_CLK_EDGE |
DWCMSHC_EMMC_DLL_DLYENA |
DLL_CMDOUT_TAPNUM_90_DEGREES |
DLL_CMDOUT_TAPNUM_FROM_SW;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CMDOUT);
}
extra = DWCMSHC_EMMC_DLL_DLYENA |
DLL_TXCLK_TAPNUM_DEFAULT |
DLL_TXCLK_TAPNUM_FROM_SW;
DLL_TXCLK_TAPNUM_FROM_SW |
DLL_TXCLK_NO_INVERTER |
txclk_tapnum;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_TXCLK);
extra = DWCMSHC_EMMC_DLL_DLYENA |
@ -339,6 +372,7 @@ static int rk3568_sdhci_config_dll(struct sdhci_host *host, u32 clock, bool enab
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CTRL);
sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CMDOUT);
/*
* Before switching to hs400es mode, the driver will enable
* enhanced strobe first. PHY needs to configure the parameters
@ -594,6 +628,17 @@ static const struct sdhci_data rk3568_data = {
.set_ios_post = rk3568_sdhci_set_ios_post,
.set_clock = rk3568_sdhci_set_clock,
.config_dll = rk3568_sdhci_config_dll,
.flags = FLAG_INVERTER_FLAG_IN_RXCLK,
.hs200_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
.hs400_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
};
static const struct sdhci_data rk3588_data = {
.set_ios_post = rk3568_sdhci_set_ios_post,
.set_clock = rk3568_sdhci_set_clock,
.config_dll = rk3568_sdhci_config_dll,
.hs200_txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT,
.hs400_txclk_tapnum = DLL_TXCLK_TAPNUM_90_DEGREES,
};
static const struct udevice_id sdhci_ids[] = {
@ -605,6 +650,10 @@ static const struct udevice_id sdhci_ids[] = {
.compatible = "rockchip,rk3568-dwcmshc",
.data = (ulong)&rk3568_data,
},
{
.compatible = "rockchip,rk3588-dwcmshc",
.data = (ulong)&rk3588_data,
},
{ }
};