dm: Rename disk uclass to ahci

This started as 'ahci' and was renamed to 'disk' during code review. But it
seems that this is too generic. Now that we have a 'blk' uclass, we can use
that as the generic piece, and revert to ahci for this.

Signed-off-by: Simon Glass <sjg@chromium.org>

arch/x86/Kconfig

@@ -47,6 +47,9 @@ source "arch/x86/cpu/queensbay/Kconfig"
 
 # architecture-specific options below
 
+config AHCI
+	default y
+
 config SYS_MALLOC_F_LEN
 	default 0x800
 

arch/x86/cpu/broadwell/sata.c

@@ -261,7 +261,7 @@ static const struct udevice_id broadwell_ahci_ids[] = {
 
 U_BOOT_DRIVER(ahci_broadwell_drv) = {
 	.name		= "ahci_broadwell",
-	.id		= UCLASS_DISK,
+	.id		= UCLASS_AHCI,
 	.of_match	= broadwell_ahci_ids,
 	.ofdata_to_platdata	= broadwell_sata_ofdata_to_platdata,
 	.probe		= broadwell_sata_probe,

arch/x86/cpu/intel_common/cpu.c

@@ -58,7 +58,7 @@ int cpu_common_init(void)
 		return -ENODEV;
 
 	/* Cause the SATA device to do its early init */
-	uclass_first_device(UCLASS_DISK, &dev);
+	uclass_first_device(UCLASS_AHCI, &dev);
 
 	return 0;
 }

arch/x86/cpu/ivybridge/bd82x6x.c

@@ -162,7 +162,7 @@ static int bd82x6x_probe(struct udevice *dev)
 		return 0;
 
 	/* Cause the SATA device to do its init */
-	uclass_first_device(UCLASS_DISK, &dev);
+	uclass_first_device(UCLASS_AHCI, &dev);
 
 	ret = syscon_get_by_driver_data(X86_SYSCON_GMA, &gma_dev);
 	if (ret)

arch/x86/cpu/ivybridge/sata.c

@@ -233,7 +233,7 @@ static const struct udevice_id bd82x6x_ahci_ids[] = {
 
 U_BOOT_DRIVER(ahci_ivybridge_drv) = {
 	.name		= "ahci_ivybridge",
-	.id		= UCLASS_DISK,
+	.id		= UCLASS_AHCI,
 	.of_match	= bd82x6x_ahci_ids,
 	.probe		= bd82x6x_sata_probe,
 };

drivers/block/Kconfig

@@ -9,10 +9,9 @@ config BLK
 	  be partitioned into several areas, called 'partitions' in U-Boot.
 	  A filesystem can be placed in each partition.
 
-config DISK
-	bool "Support disk controllers with driver model"
+config AHCI
+	bool "Support SATA controllers with driver model"
 	depends on DM
-	default y if DM
 	help
 	  This enables a uclass for disk controllers in U-Boot. Various driver
 	  types can use this, such as AHCI/SATA. It does not provide any standard

drivers/block/Makefile

@@ -7,7 +7,7 @@
 
 obj-$(CONFIG_BLK) += blk-uclass.o
 
-obj-$(CONFIG_DISK) += disk-uclass.o
+obj-$(CONFIG_AHCI) += ahci-uclass.o
 obj-$(CONFIG_SCSI_AHCI) += ahci.o
 obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
 obj-$(CONFIG_FSL_SATA) += fsl_sata.o

drivers/block/ahci-uclass.c

@@ -8,7 +8,7 @@
 #include <common.h>
 #include <dm.h>
 
-UCLASS_DRIVER(disk) = {
-	.id		= UCLASS_DISK,
-	.name		= "disk",
+UCLASS_DRIVER(ahci) = {
+	.id		= UCLASS_AHCI,
+	.name		= "ahci",
 };

include/dm/uclass-id.h

@@ -26,11 +26,11 @@ enum uclass_id {
 
 	/* U-Boot uclasses start here - in alphabetical order */
 	UCLASS_ADC,		/* Analog-to-digital converter */
+	UCLASS_AHCI,		/* SATA disk controller */
 	UCLASS_BLK,		/* Block device */
 	UCLASS_CLK,		/* Clock source, e.g. used by peripherals */
 	UCLASS_CPU,		/* CPU, typically part of an SoC */
 	UCLASS_CROS_EC,		/* Chrome OS EC */
-	UCLASS_DISK,		/* Disk controller, e.g. SATA */
 	UCLASS_DISPLAY,		/* Display (e.g. DisplayPort, HDMI) */
 	UCLASS_DMA,		/* Direct Memory Access */
 	UCLASS_RAM,		/* RAM controller */