gpio: i2c-gpio: Drop use of dm_gpio_set_dir()

This is the only driver that uses this function. Update it to use the
alternative which is dm_gpio_clrset_flags().

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Harm Berntsen <harm.berntsen@nedap.com>
This commit is contained in:
Simon Glass 2021-03-23 14:52:06 +13:00 committed by Tom Rini
parent 0219279381
commit a12aa7995f

View file

@ -48,12 +48,13 @@ static int i2c_gpio_sda_get(struct i2c_gpio_bus *bus)
static void i2c_gpio_sda_set(struct i2c_gpio_bus *bus, int bit)
{
struct gpio_desc *sda = &bus->gpios[PIN_SDA];
ulong flags;
if (bit)
sda->flags = (sda->flags & ~GPIOD_IS_OUT) | GPIOD_IS_IN;
flags = GPIOD_IS_IN;
else
sda->flags = (sda->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
dm_gpio_set_dir(sda);
flags = GPIOD_IS_OUT;
dm_gpio_clrset_flags(sda, GPIOD_MASK_DIR, flags);
}
static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
@ -62,16 +63,14 @@ static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
int count = 0;
if (bit) {
scl->flags = (scl->flags & ~GPIOD_IS_OUT) | GPIOD_IS_IN;
dm_gpio_set_dir(scl);
dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, GPIOD_IS_IN);
while (!dm_gpio_get_value(scl) && count++ < 100000)
udelay(1);
if (!dm_gpio_get_value(scl))
pr_err("timeout waiting on slave to release scl\n");
} else {
scl->flags = (scl->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
dm_gpio_set_dir(scl);
dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, GPIOD_IS_OUT);
}
}
@ -79,11 +78,11 @@ static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
static void i2c_gpio_scl_set_output_only(struct i2c_gpio_bus *bus, int bit)
{
struct gpio_desc *scl = &bus->gpios[PIN_SCL];
scl->flags = (scl->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
ulong flags = GPIOD_IS_OUT;
if (bit)
scl->flags |= GPIOD_IS_OUT_ACTIVE;
dm_gpio_set_dir(scl);
flags |= GPIOD_IS_OUT_ACTIVE;
dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, flags);
}
static void i2c_gpio_write_bit(struct i2c_gpio_bus *bus, int delay, uchar bit)