Extend POST support for PPC440

Added memory, CPU, UART, I2C and SPR POST tests for PPC440.

Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--

board/amcc/sequoia/sequoia.c

@@ -586,3 +586,13 @@ int is_pci_host(struct pci_controller *hose)
 	return (1);
 }
 #endif				/* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */

cpu/ppc4xx/cpu_init.c

@@ -211,6 +211,8 @@ cpu_init_f (void)
 	val = mfspr(tcr);
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
 	val |= 0xb8000000;      /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+	val |= 0xb0000000;      /* generate system reset after 1.34 seconds */
 #else
 	val |= 0xf0000000;      /* generate system reset after 2.684 seconds */
 #endif

include/configs/sequoia.h

@@ -59,6 +59,7 @@
 #define CFG_MONITOR_BASE	TEXT_BASE
 #define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
 #define CFG_OCM_BASE		0xe0010000      /* ocm			*/
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
 #define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
 #define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
 #define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
@@ -81,7 +82,7 @@
 #define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -328,6 +329,18 @@
 			       CFG_CMD_SDRAM	|	\
 			       CMD_USB)
 
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_UART	   | \
+				 CFG_POST_I2C	   | \
+				 CFG_POST_SPR)
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
 #define CONFIG_SUPPORT_VFAT
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */

include/post.h

@@ -91,6 +91,7 @@ extern int post_hotkeys_pressed(void);
 #define CFG_POST_SYSMON		0x00000800
 #define CFG_POST_DSP		0x00001000
 #define CFG_POST_CODEC		0x00002000
+#define CFG_POST_FPU		0x00004000
 
 #endif /* CONFIG_POST */
 

include/ppc440.h

@@ -282,6 +282,32 @@
 #define sdr_sdstp3	0x4003
 #endif	/* CONFIG_440GX */
 
+#ifdef CONFIG_440
+/*----------------------------------------------------------------------------+
+| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
++----------------------------------------------------------------------------*/
+#define CCR0_PRE		0x40000000
+#define CCR0_CRPE		0x08000000
+#define CCR0_DSTG		0x00200000
+#define CCR0_DAPUIB		0x00100000
+#define CCR0_DTB		0x00008000
+#define CCR0_GICBT		0x00004000
+#define CCR0_GDCBT		0x00002000
+#define CCR0_FLSTA		0x00000100
+#define CCR0_ICSLC_MASK		0x0000000C
+#define CCR0_ICSLT_MASK		0x00000003
+#define CCR1_TCS_MASK		0x00000080
+#define CCR1_TCS_INTCLK		0x00000000
+#define CCR1_TCS_EXTCLK		0x00000080
+#define MMUCR_SWOA		0x01000000
+#define MMUCR_U1TE		0x00400000
+#define MMUCR_U2SWOAE		0x00200000
+#define MMUCR_DULXE		0x00800000
+#define MMUCR_IULXE		0x00400000
+#define MMUCR_STS		0x00100000
+#define MMUCR_STID_MASK		0x000000FF
+#endif /* CONFIG_440 */
+
 #ifdef CONFIG_440SPE
 #undef sdr_sdstp2
 #define sdr_sdstp2	0x0022
@@ -307,30 +333,6 @@
 #define sdr_sdstp6	0x4005
 #define sdr_sdstp7	0x4007
 
-/*----------------------------------------------------------------------------+
-| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
-+----------------------------------------------------------------------------*/
-#define CCR0_PRE		0x40000000
-#define CCR0_CRPE		0x08000000
-#define CCR0_DSTG		0x00200000
-#define CCR0_DAPUIB		0x00100000
-#define CCR0_DTB		0x00008000
-#define CCR0_GICBT		0x00004000
-#define CCR0_GDCBT		0x00002000
-#define CCR0_FLSTA		0x00000100
-#define CCR0_ICSLC_MASK		0x0000000C
-#define CCR0_ICSLT_MASK		0x00000003
-#define CCR1_TCS_MASK		0x00000080
-#define CCR1_TCS_INTCLK		0x00000000
-#define CCR1_TCS_EXTCLK		0x00000080
-#define MMUCR_SEOA		0x01000000
-#define MMUCR_U1TE		0x00400000
-#define MMUCR_U2SWOAE		0x00200000
-#define MMUCR_DULXE		0x00800000
-#define MMUCR_IULXE		0x00400000
-#define MMUCR_STS		0x00100000
-#define MMUCR_STID_MASK		0x000000FF
-
 #define SDR0_CFGADDR		0x00E
 #define SDR0_CFGDATA		0x00F
 

post/cpu/ppc4xx/Makefile

@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LIB	= libpostppc4xx.a
+
+COBJS	= fpu.o spr.o uart.o watchdog.o
+
+include $(TOPDIR)/post/rules.mk

post/cpu/ppc4xx/fpu.c

@@ -0,0 +1,55 @@
+/*
+ *  Copyright (C) 2007 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_POST
+#if defined(CONFIG_440EP) || \
+    defined(CONFIG_440EPX)
+
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+int fpu_status(void)
+{
+	if (mfspr(ccr0) & CCR0_DAPUIB)
+		return 0; /* Disabled */
+	else
+		return 1; /* Enabled */
+}
+
+
+void fpu_disable(void)
+{
+	mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB);
+	mtmsr(mfmsr() & ~MSR_FP);
+}
+
+
+void fpu_enable(void)
+{
+	mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB);
+	mtmsr(mfmsr() | MSR_FP);
+}
+#endif
+#endif

post/cpu/ppc4xx/spr.c

@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * SPR test
+ *
+ * The test checks the contents of Special Purpose Registers (SPR) listed
+ * in the spr_test_list array below.
+ * Each SPR value is read using mfspr instruction, some bits are masked
+ * according to the table and the resulting value is compared to the
+ * corresponding table value.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_SPR
+
+static struct
+{
+    int number;
+    char * name;
+    unsigned long mask;
+    unsigned long value;
+} spr_test_list [] = {
+	/* Standard Special-Purpose Registers */
+
+	{0x001,	"XER",		0x00000000,	0x00000000},
+	{0x008,	"LR",		0x00000000,	0x00000000},
+	{0x009,	"CTR",		0x00000000,	0x00000000},
+	{0x016,	"DEC",		0x00000000,	0x00000000},
+	{0x01a,	"SRR0",		0x00000000,	0x00000000},
+	{0x01b,	"SRR1",		0x00000000,	0x00000000},
+	{0x110,	"SPRG0",	0x00000000,	0x00000000},
+	{0x111,	"SPRG1",	0x00000000,	0x00000000},
+	{0x112,	"SPRG2",	0x00000000,	0x00000000},
+	{0x113,	"SPRG3",	0x00000000,	0x00000000},
+	{0x11f,	"PVR",		0x00000000,	0x00000000},
+
+	/* Additional Special-Purpose Registers */
+
+	{0x30,	"PID",		0x00000000,	0x00000000},
+	{0x3a,	"CSRR0",	0x00000000,	0x00000000},
+	{0x3b,	"CSRR1",	0x00000000,	0x00000000},
+	{0x3d,	"DEAR",		0x00000000,	0x00000000},
+	{0x3e,	"ESR",		0x00000000,	0x00000000},
+	{0x3f,	"IVPR",		0xffff0000,	0x00000000},
+	{0x100,	"USPRG0",	0x00000000,	0x00000000},
+	{0x104,	"SPRG4",	0x00000000,	0x00000000},
+	{0x105,	"SPRG5",	0x00000000,	0x00000000},
+	{0x106,	"SPRG6",	0x00000000,	0x00000000},
+	{0x107,	"SPRG7",	0x00000000,	0x00000000},
+	{0x10c,	"TBL",		0x00000000,	0x00000000},
+	{0x10d,	"TBU",		0x00000000,	0x00000000},
+	{0x11e,	"PIR",		0x0000000f,	0x00000000},
+	{0x130,	"DBSR",		0x00000000,	0x00000000},
+	{0x134,	"DBCR0",	0x00000000,	0x00000000},
+	{0x135,	"DBCR1",	0x00000000,	0x00000000},
+	{0x136,	"DBCR2",	0x00000000,	0x00000000},
+	{0x138,	"IAC1",		0x00000000,	0x00000000},
+	{0x139,	"IAC2",		0x00000000,	0x00000000},
+	{0x13a,	"IAC3",		0x00000000,	0x00000000},
+	{0x13b,	"IAC4",		0x00000000,	0x00000000},
+	{0x13c,	"DAC1",		0x00000000,	0x00000000},
+	{0x13d,	"DAC2",		0x00000000,	0x00000000},
+	{0x13e,	"DVC1",		0x00000000,	0x00000000},
+	{0x13f,	"DVC2",		0x00000000,	0x00000000},
+	{0x150,	"TSR",		0x00000000,	0x00000000},
+	{0x154,	"TCR",		0x00000000,	0x00000000},
+	{0x190,	"IVOR0",	0x00000000,	0x00000000},
+	{0x191,	"IVOR1",	0x00000000,	0x00000000},
+	{0x192,	"IVOR2",	0x00000000,	0x00000000},
+	{0x193,	"IVOR3",	0x00000000,	0x00000000},
+	{0x194,	"IVOR4",	0x00000000,	0x00000000},
+	{0x195,	"IVOR5",	0x00000000,	0x00000000},
+	{0x196,	"IVOR6",	0x00000000,	0x00000000},
+	{0x197,	"IVOR7",	0x00000000,	0x00000000},
+	{0x198,	"IVOR8",	0x00000000,	0x00000000},
+	{0x199,	"IVOR9",	0x00000000,	0x00000000},
+	{0x19a,	"IVOR10",	0x00000000,	0x00000000},
+	{0x19b,	"IVOR11",	0x00000000,	0x00000000},
+	{0x19c,	"IVOR12",	0x00000000,	0x00000000},
+	{0x19d,	"IVOR13",	0x00000000,	0x00000000},
+	{0x19e,	"IVOR14",	0x00000000,	0x00000000},
+	{0x19f,	"IVOR15",	0x00000000,	0x00000000},
+	{0x23a,	"MCSRR0",	0x00000000,	0x00000000},
+	{0x23b,	"MCSRR1",	0x00000000,	0x00000000},
+	{0x23c,	"MCSR",		0x00000000,	0x00000000},
+	{0x370,	"INV0",		0x00000000,	0x00000000},
+	{0x371,	"INV1",		0x00000000,	0x00000000},
+	{0x372,	"INV2",		0x00000000,	0x00000000},
+	{0x373,	"INV3",		0x00000000,	0x00000000},
+	{0x374,	"ITV0",		0x00000000,	0x00000000},
+	{0x375,	"ITV1",		0x00000000,	0x00000000},
+	{0x376,	"ITV2",		0x00000000,	0x00000000},
+	{0x377,	"ITV3",		0x00000000,	0x00000000},
+	{0x378,	"CCR1",		0x00000000,	0x00000000},
+	{0x390,	"DNV0",		0x00000000,	0x00000000},
+	{0x391,	"DNV1",		0x00000000,	0x00000000},
+	{0x392,	"DNV2",		0x00000000,	0x00000000},
+	{0x393,	"DNV3",		0x00000000,	0x00000000},
+	{0x394,	"DTV0",		0x00000000,	0x00000000},
+	{0x395,	"DTV1",		0x00000000,	0x00000000},
+	{0x396,	"DTV2",		0x00000000,	0x00000000},
+	{0x397,	"DTV3",		0x00000000,	0x00000000},
+	{0x398,	"DVLIM",	0x00000000,	0x00000000},
+	{0x399,	"IVLIM",	0x00000000,	0x00000000},
+	{0x39b,	"RSTCFG",	0x00000000,	0x00000000},
+	{0x39c,	"DCDBTRL",	0x00000000,	0x00000000},
+	{0x39d,	"DCDBTRH",	0x00000000,	0x00000000},
+	{0x39e,	"ICDBTRL",	0x00000000,	0x00000000},
+	{0x39f,	"ICDBTRH",	0x00000000,	0x00000000},
+	{0x3b2,	"MMUCR",	0x00000000,	0x00000000},
+	{0x3b3,	"CCR0",		0x00000000,	0x00000000},
+	{0x3d3,	"ICDBDR",	0x00000000,	0x00000000},
+	{0x3f3,	"DBDR",		0x00000000,	0x00000000},
+};
+
+static int spr_test_list_size =
+		sizeof (spr_test_list) / sizeof (spr_test_list[0]);
+
+int spr_post_test (int flags)
+{
+	int ret = 0;
+	int i;
+
+	unsigned long code[] = {
+		0x7c6002a6,				/* mfspr r3,SPR */
+		0x4e800020				/* blr          */
+	};
+	unsigned long (*get_spr) (void) = (void *) code;
+
+	for (i = 0; i < spr_test_list_size; i++) {
+		int num = spr_test_list[i].number;
+
+		/* mfspr r3,num */
+		code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
+
+		asm volatile ("isync");
+
+		if ((get_spr () & spr_test_list[i].mask) !=
+			(spr_test_list[i].value & spr_test_list[i].mask)) {
+			post_log ("The value of %s special register "
+				  "is incorrect: 0x%08X\n",
+					spr_test_list[i].name, get_spr ());
+			ret = -1;
+		}
+	}
+
+	return ret;
+}
+#endif /* CONFIG_POST & CFG_POST_SPR */
+#endif /* CONFIG_POST */

post/cpu/ppc4xx/uart.c

@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The controllers are configured to loopback mode and several
+ * characters are transmitted.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_UART
+
+#include <asm/processor.h>
+#include <serial.h>
+
+#define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE  CFG_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE  CFG_PERIPHERAL_BASE + 0x00000600
+
+#define CR0_MASK        0xdfffffff
+#define CR0_EXTCLK_ENA  0x00800000
+#define CR0_UDIV_POS    0
+#define UDIV_SUBTRACT	0
+#define UART0_SDR	sdr_uart0
+#define UART1_SDR	sdr_uart1
+#define UART2_SDR	sdr_uart2
+#define UART3_SDR	sdr_uart3
+#define MFREG(a, d)	mfsdr(a, d)
+#define MTREG(a, d)	mtsdr(a, d)
+
+#define UART_RBR    0x00
+#define UART_THR    0x00
+#define UART_IER    0x01
+#define UART_IIR    0x02
+#define UART_FCR    0x02
+#define UART_LCR    0x03
+#define UART_MCR    0x04
+#define UART_LSR    0x05
+#define UART_MSR    0x06
+#define UART_SCR    0x07
+#define UART_DLL    0x00
+#define UART_DLM    0x01
+
+/*
+  Line Status Register.
+*/
+#define asyncLSRDataReady1            0x01
+#define asyncLSROverrunError1         0x02
+#define asyncLSRParityError1          0x04
+#define asyncLSRFramingError1         0x08
+#define asyncLSRBreakInterrupt1       0x10
+#define asyncLSRTxHoldEmpty1          0x20
+#define asyncLSRTxShiftEmpty1         0x40
+#define asyncLSRRxFifoError1          0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int uart_post_init (unsigned long dev_base)
+{
+	unsigned long reg;
+	unsigned long udiv;
+	unsigned short bdiv;
+	volatile char val;
+#ifdef CFG_EXT_SERIAL_CLOCK
+	unsigned long tmp;
+#endif
+	int i;
+
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+			break;
+		udelay (100);
+	}
+	MFREG(UART0_SDR, reg);
+	reg &= ~CR0_MASK;
+
+#ifdef CFG_EXT_SERIAL_CLOCK
+	reg |= CR0_EXTCLK_ENA;
+	udiv = 1;
+	tmp  = gd->baudrate * 16;
+	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+	/* For 440, the cpu clock is on divider chain A, UART on divider
+	 * chain B ... so cpu clock is irrelevant. Get the "optimized"
+	 * values that are subject to the 1/2 opb clock constraint
+	 */
+	serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+	reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS;	/* set the UART divisor */
+
+	/*
+	 * Configure input clock to baudrate generator for all
+	 * available serial ports here
+	 */
+	MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+	MTREG(UART1_SDR, reg);
+#endif
+#if defined(UART2_SDR)
+	MTREG(UART2_SDR, reg);
+#endif
+#if defined(UART3_SDR)
+	MTREG(UART3_SDR, reg);
+#endif
+
+	out8(dev_base + UART_LCR, 0x80);	/* set DLAB bit */
+	out8(dev_base + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8(dev_base + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
+	out8(dev_base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out8(dev_base + UART_FCR, 0x00);	/* disable FIFO */
+	out8(dev_base + UART_MCR, 0x10);	/* enable loopback mode */
+	val = in8(dev_base + UART_LSR);		/* clear line status */
+	val = in8(dev_base + UART_RBR);		/* read receive buffer */
+	out8(dev_base + UART_SCR, 0x00);	/* set scratchpad */
+	out8(dev_base + UART_IER, 0x00);	/* set interrupt enable reg */
+
+	return 0;
+}
+
+static void uart_post_putc (unsigned long dev_base, char c)
+{
+	int i;
+
+	out8 (dev_base + UART_THR, c);	/* put character out */
+
+	/* Wait for transfer completion */
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+			break;
+		udelay (100);
+	}
+}
+
+static int uart_post_getc (unsigned long dev_base)
+{
+	int i;
+
+	/* Wait for character available */
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
+			break;
+		udelay (100);
+	}
+	return 0xff & in8 (dev_base + UART_RBR);
+}
+
+static int test_ctlr (unsigned long dev_base, int index)
+{
+	int res = -1;
+	char test_str[] = "*** UART Test String ***\r\n";
+	int i;
+
+	uart_post_init (dev_base);
+
+	for (i = 0; i < sizeof (test_str) - 1; i++) {
+		uart_post_putc (dev_base, test_str[i]);
+		if (uart_post_getc (dev_base) != test_str[i])
+			goto done;
+	}
+	res = 0;
+done:
+	if (res)
+		post_log ("uart%d test failed\n", index);
+
+	return res;
+}
+
+int uart_post_test (int flags)
+{
+	int i, res = 0;
+	static unsigned long base[] = {
+		UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE
+	};
+
+	for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
+		if (test_ctlr (base[i], i))
+			res = -1;
+	}
+	serial_reinit_all ();
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_UART */
+
+#endif /* CONFIG_POST */

post/cpu/ppc4xx/watchdog.c

@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Watchdog test
+ *
+ * The test verifies the watchdog timer operation.
+ * On the first iteration, the test routine disables interrupts and
+ * makes a 10-second delay. If the system does not reboot during this delay,
+ * the watchdog timer is not operational and the test fails. If the system
+ * reboots, on the second iteration the test routine reports a success.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CFG_POST_WATCHDOG
+
+int watchdog_post_test (int flags)
+{
+	if (flags & POST_REBOOT) {
+		/* Test passed */
+
+		return 0;
+	} else {
+		/* 10-second delay */
+		int ints = disable_interrupts ();
+		ulong base = post_time_ms (0);
+
+		while (post_time_ms (base) < 10000)
+			;
+		if (ints)
+			enable_interrupts ();
+
+		/*
+		 * If we have reached this point, the watchdog timer
+		 * does not work
+		 */
+		return -1;
+	}
+}
+
+#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST */

post/lib_ppc/asm.S

@@ -34,6 +34,7 @@
 /* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
 	.global	cpu_post_exec_02
 cpu_post_exec_02:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 
@@ -56,6 +57,7 @@ cpu_post_exec_02:
 /* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
 	.global	cpu_post_exec_04
 cpu_post_exec_04:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 
@@ -80,6 +82,7 @@ cpu_post_exec_04:
 /* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
 	.global	cpu_post_exec_12
 cpu_post_exec_12:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -100,6 +103,7 @@ cpu_post_exec_12:
 /* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
 	.global	cpu_post_exec_11
 cpu_post_exec_11:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -119,6 +123,7 @@ cpu_post_exec_11:
 /* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
 	.global	cpu_post_exec_21
 cpu_post_exec_21:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -148,6 +153,7 @@ cpu_post_exec_21:
     ulong op2); */
 	.global	cpu_post_exec_22
 cpu_post_exec_22:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -177,6 +183,7 @@ cpu_post_exec_22:
 /* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
 	.global	cpu_post_exec_12w
 cpu_post_exec_12w:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -198,6 +205,7 @@ cpu_post_exec_12w:
 /* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
 	.global	cpu_post_exec_11w
 cpu_post_exec_11w:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -218,6 +226,7 @@ cpu_post_exec_11w:
 /* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
 	.global	cpu_post_exec_22w
 cpu_post_exec_22w:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -241,6 +250,7 @@ cpu_post_exec_22w:
 /* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
 	.global	cpu_post_exec_21w
 cpu_post_exec_21w:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -263,6 +273,7 @@ cpu_post_exec_21w:
 /* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
 	.global	cpu_post_exec_21x
 cpu_post_exec_21x:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)
@@ -286,6 +297,7 @@ cpu_post_exec_21x:
     ulong cr); */
 	.global	cpu_post_exec_31
 cpu_post_exec_31:
+	isync
 	mflr	r0
 	stwu	r0, -4(r1)
 	stwu	r4, -4(r1)

post/lib_ppc/b.c

@@ -49,7 +49,7 @@ extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
     ulong cr);
 
 static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
-    int pjump, int dec, int link, ulong pctr, ulong cr)
+    int pjump, int decr, int link, ulong pctr, ulong cr)
 {
     int ret = 0;
     ulong lr = 0;
@@ -77,7 +77,7 @@ static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
 	ret = pjump == jump ? 0 : -1;
     if (ret == 0)
     {
-	if (dec)
+	if (decr)
 	    ret = pctr == ctr + 1 ? 0 : -1;
 	else
 	    ret = pctr == ctr ? 0 : -1;
@@ -163,7 +163,7 @@ int cpu_post_test_b (void)
 		    {
 			for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
 			{
-			    int dec = cd < 2;
+			    int decr = cd < 2;
 			    int cr = cond ? 0x80000000 : 0x00000000;
 			    int jumpc = cc >= 2 ||
 					(cc == 0 && !cond) ||
@@ -174,7 +174,7 @@ int cpu_post_test_b (void)
 			    int jump = jumpc && jumpd;
 
 			    ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
-				(cc << 3) + (cd << 1), 0, jump, dec, link,
+				(cc << 3) + (cd << 1), 0, jump, decr, link,
 				ctr, cr);
 
 			    if (ret != 0)

post/post.c

@@ -428,7 +428,7 @@ void post_reloc (void)
 unsigned long post_time_ms (unsigned long base)
 {
 #ifdef CONFIG_PPC
-	return (unsigned long)get_ticks () / (get_tbclk () / CFG_HZ) - base;
+	return (unsigned long)(get_ticks () / (get_tbclk () / CFG_HZ)) - base;
 #else
 #warning "Not implemented yet"
 	return 0; /* Not implemented yet */

post/tests.c

@@ -37,6 +37,7 @@ extern int i2c_post_test (int flags);
 extern int rtc_post_test (int flags);
 extern int memory_post_test (int flags);
 extern int cpu_post_test (int flags);
+extern int fpu_post_test (int flags);
 extern int uart_post_test (int flags);
 extern int ether_post_test (int flags);
 extern int spi_post_test (int flags);
@@ -126,6 +127,19 @@ struct post_test post_list[] =
 	CFG_POST_CPU
     },
 #endif
+#if CONFIG_POST & CFG_POST_FPU
+    {
+	"FPU test",
+	"fpu",
+	"This test verifies the arithmetic logic unit of"
+	" FPU.",
+	POST_RAM | POST_ALWAYS,
+	&fpu_post_test,
+	NULL,
+	NULL,
+	CFG_POST_FPU
+    },
+#endif
 #if CONFIG_POST & CFG_POST_UART
     {
 	"UART test",