mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 16:10:58 +00:00
arm64: mvebu: dts: Add DTS file for MACCHIATOBin board
Added A8040 dts file for community board MACCHIATIBin.
The patch includes the following features:
AP - Serial console (connected to onboard FTDI usb to serial)
CP0 - PCIe x4, SATA, I2C and 10G KR
(connected to Marvell 3310 10G copper / SFP+ phy)
CP1 - Boot SPI, USB3 host, 2xSATA, 10G KR
(connected to Marvell 3310 10G copper / SFP+ phy),
SGMII connected to onboard 1512 1Gbps copper phy,
and additional SGMII connected to SFP
(default 1Gbps can be configured to 2.5Gbps).
Network interface naming -
egiga0 - CP0 KR
egiga1 - CP1 KR
egiga2 - CP1 RJ45 1Gbps connector (recommended for TFTP boot)
egiga3 - CP1 SFP default 1Gbps and can be modified to 2.5Gbps
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Rabeeh Khoury
Stefan Roese
parent
6cc102be05
commit
a0c89dac2c
2 changed files with 294 additions and 0 deletions
|
|
@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
|
|||
armada-385-amc.dtb \
|
||||
armada-7040-db.dtb \
|
||||
armada-8040-db.dtb \
|
||||
armada-8040-mcbin.dtb \
|
||||
armada-xp-gp.dtb \
|
||||
armada-xp-maxbcm.dtb \
|
||||
armada-xp-synology-ds414.dtb \
|
||||
|
|
|
|||
293
arch/arm/dts/armada-8040-mcbin.dts
Normal file
293
arch/arm/dts/armada-8040-mcbin.dts
Normal file
|
|
@ -0,0 +1,293 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Marvell International Ltd.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0
|
||||
* https://spdx.org/licenses
|
||||
*/
|
||||
|
||||
#include "armada-8040.dtsi" /* include SoC device tree */
|
||||
|
||||
/ {
|
||||
model = "MACCHIATOBin-8040";
|
||||
compatible = "marvell,armada8040-mcbin",
|
||||
"marvell,armada8040";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
i2c0 = &cpm_i2c0;
|
||||
i2c1 = &cpm_i2c1;
|
||||
spi0 = &cps_spi1;
|
||||
gpio0 = &ap_gpio0;
|
||||
gpio1 = &cpm_gpio0;
|
||||
gpio2 = &cpm_gpio1;
|
||||
};
|
||||
|
||||
memory@00000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
simple-bus {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_usb3h0_vbus: usb3-vbus0 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpm_xhci_vbus_pins>;
|
||||
regulator-name = "reg-usb3h0-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
startup-delay-us = <500000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Accessible over the mini-USB CON9 connector on the main board */
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ap_pinctl {
|
||||
/*
|
||||
* MPP Bus:
|
||||
* eMMC [0-10]
|
||||
* UART0 [11,19]
|
||||
*/
|
||||
/* 0 1 2 3 4 5 6 7 8 9 */
|
||||
pin-func = < 1 1 1 1 1 1 1 1 1 1
|
||||
1 3 0 0 0 0 0 0 0 3 >;
|
||||
};
|
||||
|
||||
/* on-board eMMC */
|
||||
&ap_sdhci0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ap_emmc_pins>;
|
||||
bus-width= <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpm_pinctl {
|
||||
/*
|
||||
* MPP Bus:
|
||||
* [0-31] = 0xff: Keep default CP0_shared_pins:
|
||||
* [11] CLKOUT_MPP_11 (out)
|
||||
* [23] LINK_RD_IN_CP2CP (in)
|
||||
* [25] CLKOUT_MPP_25 (out)
|
||||
* [29] AVS_FB_IN_CP2CP (in)
|
||||
* [32,34] SMI
|
||||
* [33] MSS power down
|
||||
* [35-38] CP0 I2C1 and I2C0
|
||||
* [39] MSS CKE Enable
|
||||
* [40,41] CP0 UART1 TX/RX
|
||||
* [42,43] XSMI (controls two 10G phys)
|
||||
* [47] USB VBUS EN
|
||||
* [48] FAN PWM
|
||||
* [49] 10G port 1 interrupt
|
||||
* [50] 10G port 0 interrupt
|
||||
* [51] 2.5G SFP TX fault
|
||||
* [52] PCIe reset out
|
||||
* [53] 2.5G SFP mode
|
||||
* [54] 2.5G SFP LOS
|
||||
* [55] Micro SD card detect
|
||||
* [56-61] Micro SD
|
||||
* [62] CP1 KR SFP FAULT
|
||||
*/
|
||||
/* 0 1 2 3 4 5 6 7 8 9 */
|
||||
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0 7 0xa 7 2 2 2 2 0xa
|
||||
7 7 8 8 0 0 0 0 0 0
|
||||
0 0 0 0 0 0 0xe 0xe 0xe 0xe
|
||||
0xe 0xe 0 >;
|
||||
|
||||
cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
|
||||
marvell,pins = < 47 >;
|
||||
marvell,function = <0>;
|
||||
};
|
||||
|
||||
cpm_pcie_reset_pins: cpm-pcie-reset-pins {
|
||||
marvell,pins = < 52 >;
|
||||
marvell,function = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
/* uSD slot */
|
||||
&cpm_sdhci0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpm_sdhci_pins>;
|
||||
bus-width= <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* PCIe x4 */
|
||||
&cpm_pcie0 {
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpm_pcie_reset_pins>;
|
||||
marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_HIGH>; /* GPIO[52] */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpm_i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpm_i2c0_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&cpm_i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpm_i2c1_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&cpm_sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpm_comphy {
|
||||
/*
|
||||
* CP0 Serdes Configuration:
|
||||
* Lane 0: PCIe0 (x4)
|
||||
* Lane 1: PCIe0 (x4)
|
||||
* Lane 2: PCIe0 (x4)
|
||||
* Lane 3: PCIe0 (x4)
|
||||
* Lane 4: KR (10G)
|
||||
* Lane 5: SATA1
|
||||
*/
|
||||
phy0 {
|
||||
phy-type = <PHY_TYPE_PEX0>;
|
||||
};
|
||||
phy1 {
|
||||
phy-type = <PHY_TYPE_PEX0>;
|
||||
};
|
||||
phy2 {
|
||||
phy-type = <PHY_TYPE_PEX0>;
|
||||
};
|
||||
phy3 {
|
||||
phy-type = <PHY_TYPE_PEX0>;
|
||||
};
|
||||
phy4 {
|
||||
phy-type = <PHY_TYPE_KR>;
|
||||
};
|
||||
phy5 {
|
||||
phy-type = <PHY_TYPE_SATA1>;
|
||||
};
|
||||
};
|
||||
|
||||
&cps_sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cps_usb3_0 {
|
||||
vbus-supply = <®_usb3h0_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cps_utmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cps_pinctl {
|
||||
/*
|
||||
* MPP Bus:
|
||||
* [0-5] TDM
|
||||
* [6,7] CP1_UART 0
|
||||
* [8] CP1 10G SFP LOS
|
||||
* [9] CP1 10G PHY RESET
|
||||
* [10] CP1 10G SFP TX Disable
|
||||
* [11] CP1 10G SFP Mode
|
||||
* [12] SPI1 CS1n
|
||||
* [13] SPI1 MISO (TDM and SPI ROM shared)
|
||||
* [14] SPI1 CS0n
|
||||
* [15] SPI1 MOSI (TDM and SPI ROM shared)
|
||||
* [16] SPI1 CLK (TDM and SPI ROM shared)
|
||||
* [24] CP1 2.5G SFP TX Disable
|
||||
* [26] CP0 10G SFP TX Fault
|
||||
* [27] CP0 10G SFP Mode
|
||||
* [28] CP0 10G SFP LOS
|
||||
* [29] CP0 10G SFP TX Disable
|
||||
* [30] USB Over current indication
|
||||
* [31] 10G Port 0 phy reset
|
||||
* [32-62] = 0xff: Keep default CP1_shared_pins:
|
||||
*/
|
||||
/* 0 1 2 3 4 5 6 7 8 9 */
|
||||
pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x8 0x8 0x0 0x0
|
||||
0x0 0x0 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
|
||||
0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x0 0x0 0x0
|
||||
0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
||||
0xff 0xff 0xff>;
|
||||
};
|
||||
|
||||
&cps_spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cps_spi1_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x200000>;
|
||||
};
|
||||
partition@400000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x200000 0xce0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cps_comphy {
|
||||
/*
|
||||
* CP1 Serdes Configuration:
|
||||
* Lane 0: SGMII2
|
||||
* Lane 1: SATA 0
|
||||
* Lane 2: USB HOST 0
|
||||
* Lane 3: SATA1
|
||||
* Lane 4: KR (10G)
|
||||
* Lane 5: SGMII3
|
||||
*/
|
||||
phy0 {
|
||||
phy-type = <PHY_TYPE_SGMII2>;
|
||||
phy-speed = <PHY_SPEED_1_25G>;
|
||||
};
|
||||
phy1 {
|
||||
phy-type = <PHY_TYPE_SATA0>;
|
||||
};
|
||||
phy2 {
|
||||
phy-type = <PHY_TYPE_USB3_HOST0>;
|
||||
};
|
||||
phy3 {
|
||||
phy-type = <PHY_TYPE_SATA1>;
|
||||
};
|
||||
phy4 {
|
||||
phy-type = <PHY_TYPE_KR>;
|
||||
};
|
||||
phy5 {
|
||||
phy-type = <PHY_TYPE_SGMII3>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in a new issue