board: toradex: verdin-imx8mp: enable usb device and fastboot support

Enable USB device and fastboot support which may be used to load the
Toradex Easy Installer FIT image.

While at it also enable USB mass storage aka UMS support.

Note that the i.MX 8M Plus recovery mode support is based on the USB
boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial
downloader support.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
This commit is contained in:
Marcel Ziswiler 2023-08-28 23:38:02 +02:00 committed by Tom Rini
parent d5d9770f58
commit 9bd2e70b31

View file

@ -79,6 +79,7 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_READ=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
@ -108,6 +109,12 @@ CONFIG_BOOTCOUNT_ENV=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_CLK_IMX8MP=y
CONFIG_FSL_CAAM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x42800000
CONFIG_FASTBOOT_BUF_SIZE=0x40000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_UUU_SUPPORT=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_GPIO_HOG=y
CONFIG_SPL_GPIO_HOG=y
CONFIG_MXC_GPIO=y
@ -138,6 +145,7 @@ CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PHY=y
CONFIG_PHY_IMX8MQ_USB=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
@ -160,14 +168,20 @@ CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_TMU=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
# CONFIG_USB_EHCI_MX7 is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_IMX_WATCHDOG=y
CONFIG_HEXDUMP=y